Paper and Specialty Media Guide - July 2015

Transcription

1 Xerox Colour C75/J75 Press - Europe Paper and Specialty Media uide - July 2015 For your convenience, this guide contains three lists: Recommended Media List Custom Media List Antalis Media CompaMbility Matrix The Recommended Media List contains Xerox paper and specialty media, digitally opmmized, designed from stringent specificamons and manufactured for opmmal and constant image quality performance. Xerox branded paper and specialty media have undergone rigorous tesmng by Xerox. Any paper and print media that is featured on the Recommended Media List for a specific Xerox printer or digital press will give opmmum performance. This is how Antalis can offer 100% Performance uaranteed. Learn more at guaranteed.com The Custom Media List contains custom media that have been tested on Xerox digital prinmng equipment. Custom media on this list are digitally opmmized, designed and manufactured for performance in Xerox digital prinmng equipment. Customers should validate the Best PracMces for OperaMon are acceptable for their applicamon. When purchasing a parmcular media product for the first Mme, customers are advised to purchase small quanmmes to insure that expectamons are met. The Antalis Media Compa6bility Matrix (MCM) contains paper and specialty media distributed by Antalis, that have gone through special tesmng by Xerox. Based on such tesmng any paper and print media that is featured on the MCM with a "" ramng for a specific Xerox printer or digital press will give excellent print results using standard se[ngs for opmmized performance and will carry the 100% Performance uaranteed. Some media may require prior tesmng, as prinmng results depend on print jobs as indicated Learn more at guaranteed.com Important Notes: Media recommendamons made in this publicamon are based on qualificamon tests conducted using standard test images with moderate to heavy image area coverage. Test machines are maintained within specificamons defined by user documentamon. * TesMng environment: Temperature 23ºC±2, RelaMve Humidity range 20-50%. Reliability is based on your operamng environment and applicamon mix. Machine reliability specificamons may be affected by high usage of heavy weight and speciality stocks. In addimon, variancess in machine reliability may occu due to extended use of some media types. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a parmcular media product for the first Mme, customers are advised to purchase small quanmmes to ensure their expectamons are met Antalis InternaMonal. All rights reserved. Xerox and Xerox Design are trademarks of Xerox CorporaMon in the United States and other countries and are used under license from Xerox CorporaMon. Antalis InternaMonal is a trademark licensee of Xerox CorporaMon. 1 of 27 Paper and Specialty Media uide - July 2015

2 2 of 27 Xerox Colour C75/J75 Press - Recommended Material List - Europe - July 2015 The Recommended Media List contains Xerox paper and specialty media, digitally optimized, designed from stringent specifications and manufactured for optimal and constant image quality performance. Xerox branded paper and specialty media have undergone rigorous testing by Xerox. Any paper and print media that is featured on the Recommended Media List for a specific Xerox printer or digital press will give optimum performance. This is how Antalis can offer 100% Performance uaranteed. rammage Standard Cut Sizes (g/m 2 ) of the paper in grams A4 A3 SRA3 per square 210x297 mm 297x420 mm 320x450 mm metre Range Specification Instructions for Printing one side (Simplex) or two sides (Duplex) Business Papers (Monochrome and text printing) Xerox Premier 80 gsm Xerox Premier 90 gsm Xerox Business 80 gsm Xerox Exclusive 80 gsm (4- hole) Xerox Exclusive 90 gsm 003R OK All Trays OK All Trays 80 OK All Trays OK All Trays 003R R OK All Trays OK All Trays 90 OK All Trays OK All Trays 003R R OK All Trays OK All Trays 80 OK All Trays OK All Trays 003R R OK All Trays OK All Trays 80 OK All Trays OK All Trays 003R R OK All Trays OK All Trays 003R OK All Trays OK All Trays 90 OK All Trays OK All Trays 003R90600 Xerox Colour C75/J75 Trays/ Selection and Best Practices for Operation Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, gsm gsm gsm gsm gsm gsm gsm gsm gsm Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Premium Papers (Colour and high area coverage applications) Xerox Colour Impressions 80 gsm Xerox Colotech+ old 90 gsm Xerox Colotech+ 90 gsm Xerox Colour Impressions 90 gsm Xerox Colotech+ old 100 gsm Xerox Colotech+ 100 gsm Xerox Colotech Natural White 100 gsm Xerox Colour Impressions 100 gsm Xerox Colotech+ old 120 gsm Xerox Colotech+ 120 gsm Xerox Colour Impressions 120 gsm 003R OK All Trays OK All Trays 80 OK All Trays OK All Trays 003R R98840 OK All Trays OK All Trays 90 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R R98845 OK All Trays OK All Trays 100 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R R98849 OK All Trays OK All Trays 120 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R98685 Uncoated Heavy Stocks Xerox Colour Impressions 160 gsm Xerox Colotech+ old 160 gsm Xerox Colotech+ 160 gsm Xerox Colotech Natural White 160 gsm 003R OK All Trays OK All Trays 160 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R95956 Uncoated Heavy Stocks Xerox Colotech+ old 200 gsm Xerox Colotech+ 200 gsm Xerox Colotech Natural White 200 gsm Xerox Colotech+ old 220 gsm Xerox Colotech+ 220 gsm Xerox Colotech+ old 250 gsm Xerox Colotech+ 250 gsm 003R OK All Trays OK All Trays 200 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R R98977 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 250 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R94671 Paper and Specialty Media uide - July 2015

3 3 of 27 Xerox Colour C75/J75 Press - Recommended Material List - Europe - July 2015 The Recommended Media List contains Xerox paper and specialty media, digitally optimized, designed from stringent specifications and manufactured for optimal and constant image quality performance. Xerox branded paper and specialty media have undergone rigorous testing by Xerox. Any paper and print media that is featured on the Recommended Media List for a specific Xerox printer or digital press will give optimum performance. This is how Antalis can offer 100% Performance uaranteed. rammage Standard Cut Sizes (g/m 2 ) of the paper in grams A4 A3 SRA3 per square 210x297 mm 297x420 mm 320x450 mm metre Range Specification Instructions for Printing one side (Simplex) or two sides (Duplex) Business Papers Xerox Colour Impressions 250 gsm Xerox Colotech+ old 280 gsm Xerox Colotech+ 280 gsm Xerox Colotech+ old 300 gsm Xerox Colotech+ 300 gsm Coated Text or Book Stocks C2S Xerox Colotech+ Silk Coated 120 gsm Xerox Colotech+ loss Coated 120 gsm Xerox Colotech+ Silk Coated 140 gsm Xerox Colotech+ loss Coated 140 gsm Coated Heavy Stocks C2S Xerox Colotech+ Silk Coated 170 gsm Xerox Colotech+ loss Coated 170 gsm Xerox Colotech+ Silk Coated 210 gsm Xerox Colotech+ loss Coated 210 gsm Xerox Colotech+ Silk Coated 250 gsm Xerox Colotech+ loss Coated 250 gsm Xerox Colotech+ Silk Coated 280 gsm Xerox Colotech+ loss Coated 280 gsm Supergloss Coated Heavy Stocks C1S Xerox Colotech+ Supergloss 160 gsm Image quality will not be as good on second side Xerox Colotech+ Supergloss 210 gsm Image quality will not be as good on second side Xerox Colour C75/J75 Trays/ Selection and Best Practices for Operation Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, gsm gsm gsm gsm gsm gsm gsm gsm gsm Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 250 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 280 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 280 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 300 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 300 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R R OK All Trays OK All Trays 120 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R R OK All Trays OK All Trays 120 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R R OK All Trays OK All Trays 140 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R R OK All Trays OK All Trays 140 OK All Trays OK All Trays 003R R OK All Trays OK All Trays 003R OK All Trays OK All Trays 170 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R R OK All Trays OK All Trays 170 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 210 OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 250 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 250 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 280 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 280 Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R Tray 5, 6, 7 Only Tray 5, 6, 7 Only 003R90351 Select gsm mode. Load with coated side up. 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays Select gsm mode. Load with coated side up. 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays 003R OK All Trays OK All Trays Xerox Colotech+ Supergloss 250 gsm Image quality will not be as good on second side Select gsm mode. Load with coated side up. 003R Bypass Tray Bypass Tray 003R Bypass Tray Bypass Tray 003R Bypass Tray Bypass Tray Specialties Xerox ValuPeelCard Coated Maximum 50 Sheet stacks 500 Sheet Box 003R OK All Trays OK All Trays Xerox ValuPeelCard Uncoated Maximum 50 Sheet stacks 500 Sheet Box 003R OK All Trays OK All Trays Xerox ValuPerfCard Uncoated Maximum 50 Sheet stacks 500 Sheet Box 003R OK All Trays OK All Trays Xerox DocuMagnet Uncoated Maximum 50 Sheet stacks. Do not image base sheet in card area. 500 Sheet Box 003R OK All Trays Xerox Business Cards, 10- up Xerox Colotech+ Supergloss Document Folder Select uncoated gsm mode in Tray image side up. OK All Trays Manual Duplex 003R Coated gsm mode for glossy, Uncoated gsm for matt 003R Bypass Tray Manual Duplex Paper and Specialty Media uide - July 2015

4 4 of 27 Xerox Colour C75/J75 Press - Recommended Material List - Europe - July 2015 The Recommended Media List contains Xerox paper and specialty media, digitally optimized, designed from stringent specifications and manufactured for optimal and constant image quality performance. Xerox branded paper and specialty media have undergone rigorous testing by Xerox. Any paper and print media that is featured on the Recommended Media List for a specific Xerox printer or digital press will give optimum performance. This is how Antalis can offer 100% Performance uaranteed. rammage Standard Cut Sizes (g/m 2 ) of the paper in grams A4 A3 SRA3 per square 210x297 mm 297x420 mm 320x450 mm metre Range Specification Instructions for Printing one side (Simplex) or two sides (Duplex) Business Papers Transparencies Xerox Colour C75/J75 Trays/ Selection and Best Practices for Operation Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 Bypass: Tray 5 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, 7 OHCF: Trays 6, gsm gsm gsm gsm gsm gsm gsm gsm gsm Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Xerox Premium Universal Transparency with Paper Backing 003R microns OK All Trays 100 microns OK All Trays 003R98199 Tab Stock Feed long edge first, tabs trailing Xerox Colotech+ Tabs White 100 x 5 reverse Xerox Colotech+ Tabs White 50 x 10 reverse 003R R Tray 5/MSI Bypass Tray 5/MSI Bypass Label Stock Xerox Colour Laser Printer Labels 1 PER A4 6 PER A4 8 PER A4 14 PER A4 24 PER A4 Xerox loss Coated Labels 1 PER A4 Xerox Colotech+ Matt CD Labels & CD Inserts Combi Box paper Xerox Universal Paper Carbonless Paper Label Stock (approximately) 003R OK All Trays 003R OK All Trays 003R OK All Trays 003R OK All Trays 003R OK All Trays 003R OK All Trays 003R & 120 OK All Trays of Paper Load transfer paper long edge feed, Coated gsm, simplex only, face up output to catch tray or finisher top tray. 003R R Tray 5 only of Paper Xerox Premium Digital Carbonless Paper CB Singles White (W) 003R OK All Trays OK All Trays CFB Singles White (W) 003R OK All Trays OK All Trays CFB Singles Yellow (Y) 003R OK All Trays OK All Trays CF Singles Yellow (Y) 003R OK All Trays OK All Trays CF Singles Pink (P) 003R OK All Trays OK All Trays CF Singles White (W) 003R OK All Trays OK All Trays 2 Part Straight / Reverse W/Y 003R / 82 OK All Trays OK All Trays 2 Part Straight / Reverse W/P 003R / 82 OK All Trays OK All Trays 2 Part Straight / Reverse W/Y 82 / 82 OK All Trays OK All Trays 003R Part Reverse P/Y/W 82 / 86 / 82 OK All Trays OK All Trays 003R Part Straight W/Y/P 003R / 86 / 82 OK All Trays OK All Trays 3 Part Straight W/Y/P 82 / 86 / 82 OK All Trays OK All Trays 003R Part Reverse B/P/Y/W 82 / 86 / 86 / 82 OK All Trays OK All Trays 003R Part Straight W/Y/P/B 003R / 86 / 86 / 82 OK All Trays OK All Trays Paper and Specialty Media uide - July 2015

5 5 of 27 Xerox Colour C75/J75 Press - Custom Media List - Europe - July 2015 The Custom Media List contains custom media that have been tested on Xerox digital printing equipment. Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment. Customers should validate the Best Practices for Operation are acceptable for their application. When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. Size Tested Xerox Colour C75/J75 Trays/ Selection and Best Practices for Operation A4 A3 SRA3 Other rammage Selection (Media Type) Feed Tray Best Practices for Operation Photo Media 003R96904 Xerox FunFlip 216 x 279 mm 167 (8.5"x11") gsm (Coated) Simplex Only Tray 5 MSI / Bypass Tray 6 (OHCF) Image quality degradation /deletions may occur if imaged over perforations, die cuts and scores. Maintain un- imaged clearances of 3mm. Single sheet from Tray 5/MSI Bypass. Simplex only application. Registration variability +/- 2.3 mm. Translucent Paper Xerox Translucent 105 gsm 007R (Coated) Simplex Only Tray 5 MSI / Bypass Tray 6 (OHCF) Acclimatise paper at printer environment for at least 24 hours prior to running. Sheets should be fanned gently before loading into the feed tray. Feed from all trays. Fan sheets well before loading. Simplex only application. Xerox Translucent 135 gsm 007R gsm (Coated) Simplex Only Tray 5 MSI / Bypass Tray 6 (OHCF) Acclimatise paper at printer environment for at least 24 hours prior to running. Sheets should be fanned gently before loading into the feed tray. Feed from all trays. Fan sheets well before loading. Simplex only application. DigiBoard Xerox DigiBoard Trim & Tape Xerox DigiBoard Perforated & Tabbed Xerox DigiBoard Base Materials Variety Pack CD Wallet A4 Folder Tent Card A5 Folder Pillow Pack Mug Box Wine Sleeve Business Card Box Tent Card Tall A4 Show Card Variety Pack Tent Card Mug Box Wine Sleeve Tent Card Tall CD Wrap Door Hanger olf Ball Box Desk Tidy Card Photo Canvas ift Box Lid ift Box Base Wine Box Inner 003R R R R R R R R R R R R R R R R R R R R R R R R gsm (Coated) Simplex Only and Face up gsm (Coated) Simplex Only and Face up Tray 5, Trays 6 & 7 OHCF Tray 5, Trays 6 & 7 OHCF Acclimatise paper at printer environment for at least 24 hours prior to running. Sheets should be fanned gently before loading into the feed tray. Feed from Tray 5MSI, single sheet loading only. Trays 6 & 7 OHCF: fan sheets before loading. Simplex only. Face up printing. Avoid printing within 5 mm of perforations and creases. Acclimatise paper at printer environment for at least 24 hours prior to running. Sheets should be fanned gently before loading into the feed tray. Feed from Tray 5MSI, single sheet loading only. Trays 6 & 7 OHCF: fan sheets before loading. Simplex only. Face up printing. Avoid printing within 5 mm of perforations and creases. Not applicable Not applicable Base box for 003R Not for printing Not applicable Not applicable Inner box for 003R96913/003R Not for printing Paper and Specialty Media uide - July 2015

6 6 of 27 Xerox Colour C75/J75 Press - Custom Media List - Europe - July 2015 The Custom Media List contains custom media that have been tested on Xerox digital printing equipment. Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment. Customers should validate the Best Practices for Operation are acceptable for their application. When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. Size Tested Xerox Colour C75/J75 Trays/ Selection and Best Practices for Operation A4 A3 SRA3 Other rammage Selection (Media Type) Feed Tray Best Practices for Operation Premium NeverTear Polyester Xerox Premium NeverTear 95μm 003R (Coated) Tray 5, Trays 6 & 7 OHCF Select Face- Up Delivery. Stacking may be compromised due to static. Not intended for extensive/exclusive usage. adjustments may be required for optimum image quality. Xerox Premium NeverTear 120μm 003R (Coated) Tray 5, Trays 6 & 7 OHCF Select Face- Up Delivery. Stacking may be compromised due to static. Not intended for extensive/exclusive usage. adjustments may be required for optimum image quality. Xerox Premium NeverTear 145μm 003R (Coated) Tray 5, Trays 6 & 7 OHCF Select Face- Up Delivery. Stacking may be compromised due to static. Not intended for extensive/exclusive usage. adjustments may be required for optimum image quality. Premium NeverTear Synthetic Labels Matt White Polyester, Permanent Adhesive 007R gsm (Label) Simplex only Tray 5 MSI / Bypass Tray 6 (OHCF) Load tray with sheets short edge feeding first (SEF). Deliver sheets in face- up orientation. loss White Polyester, Permanent Adhesive 007R gsm (Label) Simplex only Tray 5 MSI / Bypass Tray 6 (OHCF) Stacking may be compromised due to high static levels in the sheet lass Clear Polyester, Permanent Adhesive 007R gsm (Label) Simplex only Tray 5 MSI / Bypass Tray 6 (OHCF) Stacking may be compromised due to high static levels in the sheet Frosted Polyester, Permanent Adhesive 007R gsm (Label) Simplex only Tray 5 MSI / Bypass Tray 6 (OHCF) Load tray long edge feeding first (LEF) and deliver in face- up orientation. lass Clear Polyester, Low Tack Adhesive 007R gsm (Label) Simplex only Tray 5 MSI / Bypass Tray 6 (OHCF) Stacking may be compromised due to high static levels in the sheet DuraPaper Label Xerox DuraPaper Label 003R R R gsm (Label) Simplex only Tray 5 MSI / Bypass Tray 6 (OHCF) Select Face- Up Delivery to the Offset Catch Tray. Not intended for extensive/exclusive usage. Paper and Specialty Media uide - July 2015

7 7 of 27 The Antalis Media Compatibility Matrix (MCM) contains paper and specialty media distributed by Antalis, that have gone through special testing by Xerox. Based on such testing any paper and print media that is featured on the MCM with a "" rating for a specific Xerox printer or digital press will give excellent print results using standard settings for optimized performance and will carry the 100% Performance uaranteed. Some media may require prior testing, as printing results depend on print jobs as indicated : Certified with excellent printing results using default settings : Certified with excellent print results using specific settings for optimized performance : Not recommended Media Machine Setting: Uncoated gem Actual Media Basis : 100gsm (100gsm Listed on Box) The Custom Paper Profile setting of '60' for side 1 & Uncoated, Creative Conqueror CX22 Diamond White 100 Custom Paper Profile Setting Side 1 / Side 2: 60 / 60 side 2 is near the lowest transfer capability (limited latitude) for this device. Minor to Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying an adjusted Custom Paper Profile. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Auto - See Contamination = PASSED w / Slight to Minor Levels Media Machine Setting: Uncoated gem Uncoated, Creative Conqueror Wove Brilliant White 100 Actual Media Basis : 100gsm (100gsm Listed on Box) Custom Paper Profile Setting Side 1 / Side 2: / Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Left Button - See Simplex = 2mm TI / Duplex = Flat Contamination = PASSED w / Slight to Minor Levels Minor to Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying an adjusted Custom Paper Profile. Slight to minor levels of contamination, in the form of paper dust and / or sheet surface coating were observed on Tray Feed components. Contamination levels did not cause any loss of functionality to the test device. Media Machine Setting: Uncoated gsm Uncoated, Creative Conqueror Wove Brilliant White 300 Actual Media Basis : 300gsm (300gsm Listed on Box) Custom Paper Profile Setting Side 1 / Side 2: / Output Destination: HCS Top Tray / Finisher Top Output Tray (recommended) Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Auto - See Simplex = 2.5mm AI / Duplex = Flat Contamination = PASSED w / Slight to Minor Levels The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capability (limited latitude) for this device. Minor to Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying an adjusted Custom Paper Profile. Uncoated, Creative Conqueror Laid Brilliant White 100 Media Machine Setting: Uncoated gsm Actual Media Basis : 100gsm (100gsm Listed on Box) Custom Paper Profile Setting Side 1 / Side 2: / Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Auto - See Simplex = 1.5mm AI / Duplex = Flat Uncoated Side 1 Image Quality = CAUTION Uncoated Side 2 Image Quality = FAILED Contamination = PASSED w / Slight to Minor Levels The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capability (limited latitude) for this device. Moderate to High levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying a High mottle levels were likely the result of the sheets surface properties (rough) and the devices inability to 'fill' in the variations of the sheets surface. Slight to minor levels of contamination, in the form of paper dust and / or sheet surface coating were observed on Tray Feed components. Contamination levels did not cause any loss of functionality to the test device. Media Machine Setting: Uncoated gsm Actual Media Basis : 220gsm (220gsm Listed on Box) Simplex = 3mm TI / Duplex = Flat Uncoated Side 1 Image Quality = FAILED The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capability (no latitude) for this device. Uncoated, Creative Conqueror Laid Brilliant White 220 Custom Paper Profile Setting Side 1 / Side 2: / Uncoated Side 2 Image Quality = FAILED Moderate to High levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying a High mottle levels were likely the result of the sheets surface properties (line design) and the devices inability to 'fill' in the variations of the sheets surface. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Auto - See Contamination = PASSED w / Slight to Minor Levels Media Machine Setting: Uncoated gsm Actual Media Basis : 120gsm (120gsm listed on box) Uncoated, Creative Conqueror Iridescent Silver Mist 120 Custom Paper Profile Setting Side 1 / Side 2: 100 / 100 Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Decurler settings adjusted via the Custom Paper Profile found in the Machine Status menu, Tools tab of the User Interface, at Mottle levels will vary and are media, file, colour, application, area coverage, environmental and DFE (digital front end) dependent Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto Contamination = PASSED w \ Slight Levels Media Machine Setting: Uncoated gem Actual Media Basis : 220gsm (220gsm listed on box) Simplex = 4.5mm TI / Duplex = Flat Uncoated, Creative Conqueror Wove Brilliant White 220 Custom Paper Profile Setting Side 1 / Side 2: / 100 Uncoated Side 1 Image Quality = CAUTION Uncoated Side 2 Image Quality = CAUTION Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less on the away from seam side of the test media despite applying a Mottle levels were likely the result of the sheets surface properties (textured/rough) and the devices inability to 'fill' in the variations of the sheets surface. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Right Button Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Comment Contamination = PASSED w \ Slight Levels Paper and Specialty Media uide - July 2015

8 8 of 27 The Antalis Media Compatibility Matrix (MCM) contains paper and specialty media distributed by Antalis, that have gone through special testing by Xerox. Based on such testing any paper and print media that is featured on the MCM with a "" rating for a specific Xerox printer or digital press will give excellent print results using standard settings for optimized performance and will carry the 100% Performance uaranteed. Some media may require prior testing, as printing results depend on print jobs as indicated : Certified with excellent printing results using default settings : Certified with excellent print results using specific settings for optimized performance : Not recommended Media Machine Setting: Uncoated gsm Actual Media Basis : 250gsm (250gsm Listed on Box) Simplex = 4.25mm AI / Duplex = 2.25mm TI Uncoated Side 1 Image Quality = CAUTION Moderate to high levels of mottle were observed in some solid area colours and in halftones of 80% and less on the away from Uncoated, Creative Conqueror Bamboo Natural White 250 Custom Paper Profile Setting Side 1 / Side 2: / Uncoated Side 2 Image Quality = CAUTION seam side of the test media despite applying a Mottle levels were likely the result of the sheets surface properties (textured/rough) and the devices inability to 'fill' in the variations of the sheets surface. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Right Button - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Left Button Media Machine Setting: Uncoated gem Actual Media Basis : 135gsm (135gsm listed on box) Simplex = Flat / Duplex = N/A Uncoated, Creative Curious Collection Matter Ibizenca Sand 135 Custom Paper Profile Setting Side 1 / Side 2: 100 / 100 Uncoated Side 1 Image Quality = N/A Uncoated Side 2 Image Quality = N/A Toner Adhesion = PASSED Seam Side Decurler settings adjusted via the Custom Paper Profile found in the 'Machine Status' menu, 'Tools' tab, of the User Interface, at Simplex / Duplex: Simplex Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Contamination = FAIL w \ moderate to high Levels Media Machine Setting: Coated gem Uncoated, Creative Curious Collection Skin Extra White 270 Actual Media Basis : 270gsm (270 gem listed on box) Custom Paper Profile Setting Side 1 / Side 2: / Output Destination: Finisher Top Tray Only Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Right Button - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto Only 4 Point Curl - CAUTION Simplex = 11mm AI / Duplex = N/A Contamination = PASSED w \ Slight to minor Levels Decurler settings adjusted via the Custom Paper Profile found in the 'Machine Status' menu, 'Tools' tab, of the User Interface, at Despite applying various Decurler settings, the best achievable Simplex Curl measured 11mm, which is near the upper curl limits expected for this device. The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capability (limited latitude) for this device. Minor to moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying the adjusted Custom Paper Profile settings. Media Machine Setting: Coated gem Uncoated, Creative Curious Collection Metallics Ice Silver 300 Actual Media Basis : 296gsm (300 gem listed on box) Custom Paper Profile Setting Side 1 / Side 2: 100 / 100 Output Destination: Finisher Top Tray Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Point Curl - CAUTION Simplex = 10mm TI / Duplex = N/A Coated Side 1 Image Quality = CAUTION Coated Side 2 Image Quality = CAUTION Contamination = PASSED w \ Slight to minor Levels Decurler settings adjusted via the Custom Paper Profile found in the 'Machine Status' menu, 'Tools' tab, of the User Interface, at Despite applying various Decurler settings, the best achievable Simplex Curl measured 10mm, which is beyond the upper curl limits expected for this device. Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying the adjusted Custom Paper Profile settings. Mottle levels will vary and are media, file, colour, application, area coverage, environmental Only Media Machine Setting: Uncoated gsm Actual Media Basis : 270gsm (270gsm listed on Box) Simplex White = 2mm AI / Duplex White = 3mm TI The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capabilities (limited to no latitude) for this device. Uncoated Side 1 Image Quality = FAIL High levels of mottle were observed in some solid area colours and in halftones of 80% and less on both sides of the test media Uncoated, Creative Curious Collection Matter Desiree Red 270 Custom Paper Profile Setting Side 1 / Side 2: 60 / 60 Uncoated Side 2 Image Quality = FAIL despite applying a Mottle levels were likely related to the sheets surface characteristics (rough / textured) and the test devices inability to 'fill' in Simplex Stacking = N/A the sheets surface variations. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Auto - See Contamination = FAIL w / Moderate to High Levels Face Up / Down Output Orientation: Simplex = Face Up / Duplex = Face Up The jams recorded during testing were the result of detected misfeeds. Media Machine Setting: Uncoated gsm Actual Media Basis : 270gsm (270gsm listed on box) Simplex = Flat / Duplex = 2.75mm AI Uncoated, Creative Curious Collection Skin rey 270 Custom Paper Profile Setting Side 1 / Side 2: / (Finisher Top Output Tray Recommended) The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capabilities (limited to no latitude) for this device. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Comment Contamination = PASSED w \ Slight Levels Media Machine Setting: Uncoated gem Actual Media Basis : 240gsm (240gsm listed on box) Uncoated, Creative Curious Collection Metallics Cryogen White 240 Custom Paper Profile Setting Side 1 / Side 2: 120 / 100 Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Right Button 120 Simplex = 3.5mm TI / Duplex = 2.5mm TI Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Comment Contamination = PASSED w \ Slight Levels Paper and Specialty Media uide - July 2015

9 9 of 27 The Antalis Media Compatibility Matrix (MCM) contains paper and specialty media distributed by Antalis, that have gone through special testing by Xerox. Based on such testing any paper and print media that is featured on the MCM with a "" rating for a specific Xerox printer or digital press will give excellent print results using standard settings for optimized performance and will carry the 100% Performance uaranteed. Some media may require prior testing, as printing results depend on print jobs as indicated : Certified with excellent printing results using default settings : Certified with excellent print results using specific settings for optimized performance : Not recommended Media Machine Setting: Uncoated gem Actual Media Basis : 240gsm (240gsm listed on box) Simplex = 2mm TI / Duplex = 2mm TI Uncoated, Creative Curious Collection Metallics Europa Ivory 240 Custom Paper Profile Setting Side 1 / Side 2: 100 / The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capabilities (limited to no latitude) for this device. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto Contamination = PASSED w \ Slight Levels Media Machine Setting: Coated gem Uncoated, Creative Curious Collection Metallics Super old 300 Actual Media Basis : 300gsm (300gsm listed on box) Custom Paper Profile Setting Side 1 / Side 2: 60 / Output Destination: Finisher Top Right Output Tray Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Left Button - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Left Button 60 4 Point Curl - CAUTION Simplex = 8mm TI / Duplex = 2.5mm TI Contamination = PASSED w \ Slight to minor Levels Despite applying various Decurler settings, the best achievable Simplex Curl measured 8mm, which is at the upper curl limits expected for this device. Decurler settings adjusted via the Custom Paper Profile found in the 'Machine Status' menu, 'Tools' tab, of the User Interface, at The Custom Paper Profile setting of '60' for side 1 & side 2 is near the lowest transfer capabilities (limited to no latitude) for this device. Media Machine Setting: Uncoated gem Actual Media Basis : 300gsm (300 gem listed on box) Decurler settings adjusted via the Custom Paper Profile found in the 'Machine Status' menu, 'Tools' tab, of the User Interface, Simplex = 3.5mm TI / Duplex = Flat at Uncoated Side 1 Image Quality = FAIL The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capability (limited latitude) for this device. Uncoated, Creative Keaykolour Original Snow White 300 Custom Paper Profile Setting Side 1 / Side 2: / Output Destination: Finisher Top Tray Only Uncoated Side 2 Image Quality = FAIL High to severe levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying the adjusted Custom Paper Profile settings. Mottle levels were likely related to the sheets surface properties (rough) and the devices inability to 'fill' in the variations in the sheets surface. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Contamination = PASSED w \ Slight to minor Levels Only Media Machine Setting: Uncoated gsm Uncoated, Creative Keaykolour Original Tangerine 120 Actual Media Basis : 240gsm (240gsm listed on box) Custom Paper Profile Setting Side 1 / Side 2: 120 / Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto 120 Simplex = 2mm TI / Duplex = 2mm TI Uncoated Side 1 Image Quality = CAUTION Uncoated Side 2 Image Quality = CAUTION Contamination = PASSED w \ Slight Levels Moderate mottle levels were likely the result of the sheets surface properties (textured/rough) and the devices inability to 'fill' in the variations of the sheets surface. Media Machine Setting: Uncoated gem Actual Media Basis : 300gsm (300gsm listed on box) Simplex = 3.5mm TI / Duplex = 2.75mm TI Decurler settings adjusted via the Custom Paper Profile found in the 'Machine Status' menu, 'Tools' tab, of the User Interface, Uncoated Side 1 Image Quality = CAUTION at Uncoated, Creative Keaykolour Original uardsman Red 300 Custom Paper Profile Setting Side 1 / Side 2: / Output Destination: Finisher Top Right Output Tray Uncoated Side 2 Image Quality = CAUTION Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto Contamination = PASSED w \ Slight to minor Levels Media Machine Setting: Uncoated gem Decurler settings adjusted via the Custom Paper Profile found in the 'Machine Status' menu, 'Tools' tab of the User Interface, Actual Media Basis : 120gsm (120gsm Listed on Box) at Simplex = 1.5mm TI / Duplex = Flat The one simplex jam recorded was the result of a detected multi sheet feed. It is recommended that the media be fanned vigorously prior to placing it in the Feed Tray. Uncoated, Creative Pop'Set Colours rey 120 Custom Paper Profile Setting Side 1 / Side 2: 60 / 60 The Custom Paper Profile setting of '60' for side 1 & side 2 is near the lowest transfer capability (limited latitude) for this device. Minor to Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Auto - See an adjusted Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Left Button Contamination = PASSED w / Slight to Minor Levels Media Machine Setting: Uncoated gem Uncoated, Creative Pop'Set Colours Cosmo Pink 240 Actual Media Basis : 240gsm (240gsm listed on box) Custom Paper Profile Setting Side 1 / Side 2: 60 / Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto 60 Simplex = 3mm AI / Duplex = 3mm TI Contamination = PASSED w \ Slight Levels The Custom Paper Profile setting of '60' for side 1 & side 2 is near the lowest transfer capabilities (limited to no latitude) for this device. Paper and Specialty Media uide - July 2015

10 10 of 27 The Antalis Media Compatibility Matrix (MCM) contains paper and specialty media distributed by Antalis, that have gone through special testing by Xerox. Based on such testing any paper and print media that is featured on the MCM with a "" rating for a specific Xerox printer or digital press will give excellent print results using standard settings for optimized performance and will carry the 100% Performance uaranteed. Some media may require prior testing, as printing results depend on print jobs as indicated : Certified with excellent printing results using default settings : Certified with excellent print results using specific settings for optimized performance : Not recommended Media Machine Setting: Uncoated gem Actual Media Basis : 240gsm (240gsm listed on box) Simplex = 2.5mm TI / Duplex = 5mm TI Uncoated, Creative Pop'Set Colours rey 240 Custom Paper Profile Setting Side 1 / Side 2: / The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capabilities (limited to no latitude) for this device. Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Left Button Contamination = PASSED w \ Slight Levels Uncoated, Creative Rives Dot Bright White 250 Media Machine Setting: Uncoated gsm Actual Media Basis : 250gsm (250gsm Listed on Box) Custom Paper Profile Setting Side 1 / Side 2: 100 / 100 Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Left Button - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Left Button 4 Point Curl - CAUTION Simplex = 10mm TI / Duplex = 3mm TI Uncoated Side 1 Image Quality = FAILED Uncoated Side 2 Image Quality = FAILED Toner Adhesion = PASSED Seam Side Contamination = CAUTION w / Minor Levels Despite applying various Decurler settings, the best Simplex Curl achievable measured 10mm, which is near the upper curl limits expected for this device. Excessive curl would likely lead to pre- mature 'Output Tray Full' messages, a loss in productivity and possible reliability issues on longer runs. Moderate to High levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying a High mottle levels were likely the result of the sheets surface properties (textured) and the devices inability to 'fill' in the variations of the sheets surface. Media Machine Setting: Uncoated gsm Uncoated, Creative Rives Tradition Pale rey 250 Actual Media Basis : 250gsm (250gsm Listed on Box) Custom Paper Profile Setting Side 1 / Side 2: / Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Left Button - See 4 Point Curl - CAUTION Simplex = 8.5mm TI / Duplex = 3mm TI Uncoated Side 1 Image Quality = FAILED Uncoated Side 2 Image Quality = FAILED Toner Adhesion = CAUTION Both Sides Contamination = CAUTION w / Minor to Moderate Levels Despite applying various Decurler settings, the best Simplex Curl achievable measured 8.75mm, which is near the upper curl limits expected for this device. Excessive curl would likely lead to pre- mature 'Output Tray Full' messages, a loss in productivity and possible reliability issues on longer runs. The Custom Paper Profile setting of '60' for side 2 is near the lowest transfer capability (no latitude) for this device. Moderate to High levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying a High mottle levels were likely the result of the sheets surface properties (textured) and the devices inability to 'fill' in the variations of the sheets surface. Toner Adhesion rated 'FAIR' overall with Toner being removed when moderate amounts of pressure were applied. Media Machine Setting: Uncoated gem Uncoated, Creative Rives Sensation Mat Tradition Bright White 270 Short rain Actual Media Basis : 270gsm (270 gem listed on box) Custom Paper Profile Setting Side 1 / Side 2: / Output Destination: Finisher Top Tray Only Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Uncoated Side 1 Image Quality = FAIL Uncoated Side 2 Image Quality = FAIL Contamination = PASSED w \ Slight to minor Levels Decurler settings adjusted via the Custom Paper Profile found in the 'Machine Status' menu, 'Tools' tab, of the User Interface, at Severe levels of mottle were observed in some solid area colours and in halftones of 80% and less despite applying the adjusted Custom Paper Profile settings. Mottle levels were likely related to the sheets surface properties (textured) and the devices inability to 'fill' in the variations in the sheets surface. Only Media Machine Setting: Uncoated gem Uncoated, Creative Rives Sensation Matt Tradition Bright White 270 Long rain Actual Media Basis : 270gsm (270gsm listed on box) Custom Paper Profile Setting Side 1 / Side 2: 100 / 100 Output Destination: Finisher Top Right Output Tray Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto - See Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting: Auto 4 Point Curl - N/A Simplex = N/A / Duplex = N/A Uncoated Side 1 Image Quality = CAUTION Uncoated Side 2 Image Quality = CAUTION Simplex Stacking = N/A Contamination = N/A Decurler settings adjusted via the Custom Paper Profile found in the 'Machine Status' menu, 'Tools' tab, of the User Interface, at Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less. Mottle levels were likely the result of the sheets surface properties (textured/rough) and the devices inability to 'fill' in the variations of the sheets surface. Media Machine Setting: Coated gem Actual Media Basis : 170gsm (170gsm Listed on Box) Simplex = 3.5mm TI / Duplex = 2mm TI Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less on side 2 of the test raphical Boards Carta Integra 2 Silk White 170 Custom Paper Profile Setting Side 1 / Side 2: 100 / Coated Side 2 Image Quality = CAUTION media despite applying an adjusted Custom Paper Profile. Mottle levels will vary and are media, file, colour, application, area coverage, environmental Slight to minor levels of contamination, in the form of paper dust and / or sheet surface coating were observed Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Auto - See on Tray Feed components. Duplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Left Button Contamination = PASSED w / Slight to Minor Levels Contamination levels did not cause any loss of functionality to the test device. Media Machine Setting: Coated gsm Actual Media Basis : 260gsm (265gsm Listed on Box) 4 Point Curl - CAUTION Despite applying all available decurler settings, Simplex Curl, measuring 7.5mm, is near the upper curl limits expected for this Simplex = 7.5mm TI / Duplex = 3mm TI device. Excessive curl would likely lead to pre- mature 'Output Tray Full' messages, a loss in productivity and possible reliability issues on longer runs. raphical Boards Carta Integra 2 Silk White 265 Custom Paper Profile Setting Side 1 / Side 2: 60 / 60 Coated Side 2 Image Quality = CAUTION The Custom Paper Profile setting of '60' for side 1 & side 2 is near the lowest transfer capability (limited latitude) for this device. Moderate levels of mottle were observed in some solid area colours and in halftones of 80% and less on side 2 of the test Simplex Decurler Settings: Tray Curl Properties = / IOT Setting = Auto / Finisher Setting = Auto - See media despite applying an adjusted Custom Paper Profile. Mottle levels will vary and are media, file, colour, application, area coverage, environmental Paper and Specialty Media uide - July 2015