UBLS - Under Bed Lift Swivel Mechanism

Size: px

Start display at page:

Download "UBLS - Under Bed Lift Swivel Mechanism"

Chastity York
5 years ago
Views:

SHEET 1 of 9 DESIGN HIGHLIGHTS Quiet smooth action with variable speed motion Full cable management FUNCTION An electrically operated mechanism that conceals a screen under a bed.

1 SHEET 1 of 9 DESIGN HIGHLIGHTS Quiet smooth action with variable speed motion Full cable management FUNCTION An electrically operated mechanism that conceals a screen under a bed. This mechanism allows the screen to be rotated to multiple viewing positions, up to 180 degrees in both directions. Cables for the screen can be routed through the mechanism for a very neat look. Stylish look and finish Onboard electronics Wide range of mounting options Multiple swivel positions can be saved as presets Adjustable height of telescopic feature to achieve suitable viewing height SUITABILITY The UBLS mechanism is suitable for screens from 37" up to 55". Maximum screen size as follows: H 800mm [31.5"] W 1250mm [49.25"] D 70mm [2.75"] Maximum screen weight is 40Kg [88lb]. OPTIONS Marine suitable option Any RAL colour available Bang & Olufsen / Loewe mount option SPECIFYING Check enough space is available under the bed to accommodate the mechanism. Check there is enough space at the end of the bed to allow for mechanism movements. Check screen details for mounting possibilities. Check angles for viewing. WARNING It is the responsibility of the installer to warn all potential end users of the dangers of interfering with mechanisms during operation IMPORTANT Mechanisms which lift or move weights need to be checked on a yearly basis for any damage which may result in an accident CONTROL Supplied with basic infrared remote. Can be learnt by many learning remotes. Also has switch control and RS232 so can be operated by relays, switches, Crestron / AMX or Lutron systems.

Design Highlights Sophisticated electronics allow for favourite viewing

SHEET 2 of 9 Mechanism allows bottom of screen to be elevated up to 950mm

All the power and signal cables for screen and mechanism can be concealed

Super quiet and smooth action from under bed to maximum movement.

2 Design Highlights Sophisticated electronics allow for favourite viewing positions to be programmed via the IR remote control. SHEET 2 of 9 Mechanism allows bottom of screen to be elevated up to 950mm [37.5"] above the floor. All the power and signal cables for screen and mechanism can be concealed within the mechanism. Super quiet and smooth action from under bed to maximum movement. Standard mechanism screen mount suitable for VESA 400x400, 400x300, 300x300, and 200x200 mounting. An advance control system allows the lift mechanism to be easily controlled via home automation systems such as Crestron and AMX. Two way communication is also possible via RS232. Many mounting options available for Loewe and Bang & Olufsen screens.

3 Opening Details SHEET 3 of Maximum Foot Board Thickness Opening Height Opening Width

4 End of Bed Space Details SHEET 4 of 9 At the end of the bed there needs to be enough space for the mechanism to extend from under the bed There needs to be a minimum of 'screen height + 12" / 305mm' at the end of the bed If the screen is being biased high on the screen mount to achieve even more elevation, then this end of bed space will need to be increased Minimum space required at end of bed Screen Height + 305mm [12"]

5 Telescopic Elevation Details SHEET 5 of Maximum Telescopic Elevation Lowest screen position once screen is hinged up

Rotation Details SHEET 6 of 9 AXIS OF ROTATION FOR SCREEN 20 0.

6 Rotation Details SHEET 6 of 9 AXIS OF ROTATION FOR SCREEN Clearance between telescopic column and foot board

Under Bed Space Details SHEET 7 of 9 255 10.0 Opening Height 255 10.

7 Under Bed Space Details SHEET 7 of Opening Height Minimum height required for mechanism Length required may be reduced by 190mm [7.5"] if control box is located elsewhere Minimum length required for mechanism and control box

UBLS - Under Bed Lift Swivel Mechanism SHEET 8 of 9 90 3.5 Distance from inside of foot board to front edge of mechanism 1550 61.0 Minimum internal width required www.

8 UBLS - Under Bed Lift Swivel Mechanism SHEET 8 of Distance from inside of foot board to front edge of mechanism Minimum internal width required tel: +44 (0) fax: +44 (0) Length required may be reduced by 190mm [7.5"] if control box is located elsewhere Under Bed Space Details

9 SHEET 9 of 9 Fixing Location Details Areas outlined in red show areas where fixings need to be made to the floor below These areas should ideally be wooden surfaces so that the mechanism components can be screwed down in place. These areas also need access from above in order to get the fixings in place Minimum internal width required

QA Quad Arm for Large Screens

QA Quad Arm for Large Screens SHEET 1 of 8 DESIGN HIGHLIGHTS Quiet smooth action Full cable management Stylish look and finish Wide range of mounting options OPTIONS FUNCTION The QA2-60 mechanism moves a screen away from a wall to