LSM-BE 7 - Lift System Medium with Box Enclosure
|
|
- Alan Fowler
- 5 years ago
- Views:
Transcription
1 SHEET 1 of 9 DESIGN HIGHLIGHTS Quiet smooth lifting action at approximately 40mm [1.6] per second Full cable management Wide range of mounting options 24V DC motor. Suitable for direct DC supply Marine suitable robust beam FUNCTION An electric mechanism to lift a flat screen television. Suitable for marine use. Shown here for use with an enclosed screen. SUITABILITY Suitable for a total lifting weight of 50Kg [110lbs] or 30Kg [66lbs] in a marine environment. This is the weight of the screen and box enclosure that is made by others. This enclosure can easily take 10Kg [22lbs] of the total capacity. Maximum screen height 915mm [36.0] OPTIONS Electric Flap Actuator Push Up Flap Fixed Screen Lid Custom screen back cover Heavy duty option Lift systems to suit other screen heights are available. SPECIFYING Check screen mounting details and request a suitable mount plate. Check for screen connectors that may add to screen depth. CONTROL Supplied with basic infrared remote. Can be learnt by many learning remotes. Also has switch control and RS232 so can be operated by relays, switches, Crestron / AMX or Lutron systems. WARNING It is the responsibility of the installer to warn all potential end users of the dangers of interfering with mechanisms during operation IMPORTANT Mechanisms which lift or move weights need to be checked on a yearly basis for any damage which may result in an accident
2 Design Highlights A space efficient and robust lifting mechanism, suitable for use in marine environments. Box Enclosure Support SHEET 2 of 9 The Box Enclosure gives the product a neat finish, concealing all screen connections. A robust 24V DC motor with a purpose made lead screw enables a quiet and smooth lifting action at approximately 40mm [1.6] per second. High precision linear guideways ensure stability and durability of the beam to prevent any unwanted movement of the screen. Quick lock VESA mount plate Adjustable UP and DOWN positions allow for a precise final setup within the cabinet. Full cable management protects all screen and power cables from damage and is easily accessible for future changes to the AV setup. A wide range of mounting options are available to suit different screens and speaker arrangements. Cable management Base mount bracket Robust lifting beam
3 Cable Routing The LSM has an easily removable Mount Cover that cables from the screen can be routed underneath. Cables then travel through the centre of the Mount Boss and into the beam. Cables must be routed carefully to prevent any interference with the LSM beam as it operates. Maximum Possible Depth of Conduit 38mm [1.5] SHEET 3 of 9 Screen and Mechanism cables should be routed to a control box outside of the cabinet via an opening in the back of the cabinet or a conduit leading to the bottom. SCREEN CABLE C L TOP VIEW MECHANISM CABLE POWER CABLE Recommended cable exit point Mount Cover Conduit A To Mains Power Mount Boss DETAIL A Cables exit beam and enter cable track Control Box
4 SHEET 4 of 9 Mechanism Up - In Cabinet Base Panel to Cabinet Aperture Box Enclosure to Cabinet Aperture SECTION B-B mm [] Minimum Distance from Screen to inside of Cabinet Aperture Depth = Screen Depth + 83 [3.25] (Minimum 121 [4.75]) B A B Internal Box Enclosure Box Enclosure Internal Width = Screen Width + 40mm [1.6] Back of Mechanism to Mount Max Screen Minimum Screen from Cabinet Top Max Thickness of Base and Cabinet Top B Internal Cabinet DETAIL B A Internal Cabinet Width = Screen Width [3.9] Minimum Width = 850 [33.4] IMPORTANT: Thicker cabinet tops will require a reduced maximum screen height SECTION A-A
5 Mechanism Down - In Cabinet Aperture Depth = Screen Depth + 83 [3.25] (Minimum 121 [4.75]) Minimum width of opening in rear face of Box Enclosure Aperture Width = Screen Width +80mm [3.1] D DETAIL C Back of Cabinet to Mount Shown with tapered Box Enclosure Lid in square Cabinet Aperture. A tapered Cabinet Aperture can be used to improve the fit Maximum thickness of Box Enclosure Back Cover SHEET 5 of 9 C Maximum Thickness of Base and Cabinet Top C DETAIL D Internal Cabinet Internal Box Enclosure Minimum Distance between Box Enclosure and Cabinet Max Screen C Minimum Screen from Base of Cabinet SECTION C-C IMPORTANT: Thicker cabinet tops will require a reduced maximum screen height
6 Base Panel and Box Enclosure Lid Details SHEET 6 of 9 BOX ENCLOSURE LID (TAPERED) - TOP VIEW NOTE: A tapered Box Enclosure Lid creates a good fit in the Cabinet Aperture and helps the Box Enclosure to locate within the cabinet. Lid Depth = Cabinet Aperture Depth Depth -2mm [0.1] VIEWING SIDE Box Enclosure Lid Width = Cabinet Aperture Width -2mm [0.1] BASE PANEL - TOP VIEW C L THRU Base Depth = Cabinet Aperture Depth -6mm [0.25] (Minimum 115mm [4.4]) VIEWING SIDE Base Panel Width = Cabinet Aperture Width -6mm [0.25]
7 SHEET 7 of 9 Screen Mount Adjustability A standard adjustable height VESA mount is included. This is also compatible with VESA 300 and 0 mounting patterns Separate VESA 300 and 0 mounts are available V Highest Possible Centreline of Mount C L Lowest Possible Centreline of Mount C L V300 V0
8 Mechanism Installation Overview SHEET 8 of 9 Box Enclosure Top Box Enclosure Top Support Box Enclosure Back Cover Base Panel Box Enclosure Back Section Box Enclosure Base The LSM is fixed to the back of the cabinet with wood screws in each corner
9 Overall Mechanism Dimensions SHEET 9 of 9 MECHANISM - UP POSITION MECHANISM - DOWN POSITION Back Plate
LSM PF 5 - Lift System Medium with Push Up Flap
DESIGN HIGHLIGHTS Quiet smooth action at approximately 40mm [1.6] per second Full cable management Wide range of mounting options 24V DC motor. Suitable for direct DC supply Marine suitable robust beam
More informationQA Quad Arm for Large Screens
SHEET 1 of 8 DESIGN HIGHLIGHTS Quiet smooth action Full cable management Stylish look and finish Wide range of mounting options OPTIONS FUNCTION The QA2-60 mechanism moves a screen away from a wall to
More informationUBLS - Under Bed Lift Swivel Mechanism
SHEET 1 of 9 DESIGN HIGHLIGHTS Quiet smooth action with variable speed motion Full cable management FUNCTION An electrically operated mechanism that conceals a screen under a bed. This mechanism allows
More informationHEAVY DUTY WEIGH FEET KIT. Installation Instructions
HEAVY DUTY WEIGH FEET KIT Installation Instructions PUBLISHED BY Gallagher Group Limited Kahikatea Drive, Private Bag 3026 Hamilton, New Zealand www.gallagher.co Copyright Gallagher Group Limited 2010.
More informationFLATFROG MULTITOUCH 3200
FLATFROG MULTITOUCH 3200 Quick Assembly Guide Document Number LZN 100013 R1B Issue 2012-07 Industrial Design Casing Parts List b a Package contents Industrial design casing. The following items are included:
More informationLOW-PROFILE WALLMOUNT CABINETS
USER MANUAL RMT35X SERIES LOW-PROFILE WALLMOUNT CABINETS 24/7 AT OR VISIT BLACKBOX.COM TABLE OF CONTENTS SAFETY INFORMATION... 3 Receiving, Unpacking, and Removing the Low-Profile Wallmount Cabinet from
More informationAssembly Instructions
Assembly Instructions VESA Flex Flip Lounge 1. Contents VESA Flex Flip Lounge p.3-18 p.19-37 p.38-48 p.49-58 2. Assembly Instructions VESA 3. What's in the Box Case Washer x1 T20 Driver Bit x1 M4 Split
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationSTEP 1 STEP 6 STEP 5 STEP 1 STEP 3 STEP 4 STEP 7
Step 1:Attach the tube join support by sliding in tube into legs, make sure height of the 2 legs are the same. Step 2:Attach the second join support in front of the tube join support using provided allen
More informationMONOPRICE. Modular Video Wall System with Push-to-Pop-out and Anti-Theft Features. User's Manual P/N 16102
MONOPRICE Modular Video Wall System with Push-to-Pop-out and Anti-Theft Features P/N 16102 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 5 CUSTOMER SERVICE...
More informationShowpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
More informationAPES HD-7700 Version Operator s Training Manual
APES-14-77 HD-7700 Version Operator s Training Manual Issue A1 09/03 P/N 900599 Performance Design Inc. 2350 East Braniff St. Boise Idaho 83716 This manual contains very important safety information and
More informationTried-and-tested quality.
Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.
More informationInstalling flat panels on the MPL15 wall mount
Installing flat panels on the MPL15 wall mount The MPL15 (DS-VW775) is a full-service video wall mount that can accommodate tiled LCD panels with up to a 400 x 400 mm VESA pattern in portrait and landscape
More informationINSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L. Introduction. Box Contents. Wall Mount Installations
INSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L Introduction Thank you for purchasing the Sonance Soundbar SB46 M or SB46 L. When properly installed your new Soundbar will give you years of entertainment
More informationAS-TX86. Please read these instructions carefully before using. This model will hold most Flat Panel TVs. Load capacity: 60kg (132Lbs).
AS-TX86 Please read these instructions carefully before using. This model will hold most 52-84 Flat Panel TVs. Load capacity: 60kg (132Lbs). AS-TX86 Information Please read these instructions carefully
More informationST90 SADDLE STITCHER TP10564 MISSING STITCH INSTALLATION MANUAL
ST90 SADDLE STITCHER TP10564 MISSING STITCH INSTALLATION MANUAL OVERVIEW MISSING STITCH INSTALLATION GUIDE The Missing Stitch option is an add-on to the ST-90 saddle stitcher. This unit mounts to the stitch
More informationMBM Sprint 3000 Booklet Maker
MBM Sprint 3000 Booklet Maker Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com SPRINT 3000 BOOKLETMAKER OPERATION MANUAL IMP oper3500.doc Page 1 23/01/2004 CONTENTS
More informationPIC Picture Lift Mechanism FUTUREAUTOMATION. Instruction Sheet. ISSUE: 005
Your Pack Should Contain 1 PIC - Picture Lift Mechanism 1 4 Sheet 1 of 10 Parts Throughout the following documentation, the parts indicated left will be refered to as they are listed below: 1 Framework
More informationDREAMOC XXL3 - ASSEMBLY GUIDE VERSION ORIGINAL ASSEMBLY GUIDE
DREAMOC XXL3 - ASSEMBLY GUIDE VERSION 1.3 - ORIGINAL ASSEMBLY GUIDE It is important to read this assembly guide before using the Dreamoc, and to follow advices and instructions on safety, operation and
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationSmall Above Fireplace Pull-Down Full-Motion TV Wall Mount
Small Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 33123 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
More informationFlat Panel TV Cart Instruction Manual SKU: STAND-TV02D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv02d
More informationThe Electric Kangaroo Pro
The Electric Kangaroo Pro WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY AND
More informationRotary Fixture M/V/X CLASS LASER SYSTEMS. Installation and Operation Instructions
Rotary Fixture M/V/X CLASS LASER SYSTEMS Installation and Operation Instructions 02/01/2000 Introduction The Rotary Fixture controls in the Printer Driver are used along with the optional Rotary Fixture
More informationCALRAD 25 series - potentiometers
25 series - potentiometers audio /linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 2" dia. fits into 1 4" hole. Shaft 3 16" dia. Thread length 7 32", shaft length
More informationAVENTOS lift system. AVENTOS HL lift up. Smooth motion for the lift up. Opening and closing easy and comfortable
lift system Smooth motion for the lift up With HL, the one-part front lifts up parallel to the cabinet. This lift system is ideal for applications in high and wall cabinets with fronts above or in larder
More informationHover. Installation Instructions. Raised Panel. Version
Installation Instructions Version 8-2-17 Raised Panel Table of Contents Page Raised Panel Trough 3-13 Platform Trough 14-20 Platform 120 Degree Trough 21-24 Electrical 25-28 Type A Electric Bases 29-31
More informationMighty Mo GX Series Cabinet Installation Guide. OR Rev /11
Mighty Mo GX Series Cabinet Installation Guide OR-71601787 Safety and Warning ATTENTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
More informationInstallation and Assembly: Full Service Video Wall Mount
Installation and Assembly: Full Service Video Wall Mount Model: DS-VW765-LAND Max UL Load Capacity: 125 lb (57 kg) 1 of 12 ISSUED: 05-13-11 SHEET #: 145-9011-5 05-21-12 Note: Read entire instruction sheet
More informationINSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111
INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111 The GSM-111 static wall mount fits most 23" to 30" displays. The GSM-111 is designed to adapt to VESA 200mm/ 100mm compliant displays.
More informationMM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM30 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationInstallation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
More informationKRAMER ELECTRONICS LTD. USER MANUAL MODEL: TBUS-4xl Table Connection Bus. P/N: Rev 2
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: TBUS-4xl Table Connection Bus P/N: 2900-300067 Rev 2 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Glossary 2 3 Overview
More informationALFRA PRESS. Made in Germany by ALFRA
52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,
More informationMM750 Installation Instructions
MM750 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on
More informationWASP Extended Shuttle Fitting. Process Overview
Process Overview Tools needed; metric Hex key set Remove Wasp Plate sealer from all power and pneumatic supplies; situate the unit on a clear work area for access. Ensure the Wasp plate sealer has cooled
More informationG703. Installation instructions. residential gate opener for sliding gates. remote control openers security at your fingertips
remote control openers security at your fingertips G703 residential gate opener for sliding gates Installation instructions Toll free helpline Please have your serial number and model name available before
More informationOutdoor Enclosure. VIVOTEK Pan/Tilt & Fixed Dome Series. Installation Guide
VIVOTEK Pan/Tilt & Fixed Dome Series Outdoor Enclosure Using AE-131/-132 Outdoor Enclosure, AE-151 Outdoor Enclosure, AM-114 Pendant Head (outdoor), AM-116 and AM-117 Pendant Pipes, AM-221 Gooseneck, AM-212
More information800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings
More informationKeyed latch. Cover. Service Outlet 115VAC, 15A. Plastic base. Unpack. Operator. the Operator
Service Outlet Quick Start Steps Keyed latch Cover 115VAC, 15A Plastic base Operator Unpack the Operator Site Planning and Operator Installation The illustrations and instructions presented in this guide
More informationMM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationCALRAD MINIATURE MULTI-CLICK DUAL CONTROLS 40 STEP P.C. MOUNT 11
25 Series - Potentiometers Audio & Linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 /2" dia. fits into 1 /4 hole. Shaft 3 /16" dia. Thread length 7 /32", shaft
More informationSTOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets
Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench
More informationMY-HITE CORNER ADJUSTABLE TABLE
081717 MY-HITE CORNER ADJUSTABLE TABLE C-LEG OPTION Model Number : FCNAHBC FRIANT & ASSOC. 4901 E.12 STREET OAKLAND, CA 94601 T:510.535.5113 FAX:510.535.5237 www.friant.com/systems/my-hite Please Read
More informationPRS X-Axis E-Chain Installation For Tools with a 12 Z-Axis
888-680-4466 ShopBotTools.com PRS X-Axis E-Chain Installation For Tools with a 12 Z-Axis This kit is compatible with PRS Shopbots that have an X-axis cutting area of 96 to 144. It is not immediately compatible
More informationMY-HITE ADJUSTABLE TABLE
081717 MY-HITE ADJUSTABLE TABLE Model Number : FSQAHTB FRIANT & ASSOC. 4901 E.12 STREET OAKLAND, CA 94601 T:510.535.5113 FAX:510.535.5237 www.friant.com/systems/my-hite Please Read Instructions Before
More informationUPLIFT Height Adjustable Standing Desk 3-Leg (T-Frame) DIRECTIONS FOR ASSEMBLY AND USE
UPLIFT Height Adjustable Standing Desk 3-Leg (T-Frame) DIRECTIONS FOR ASSEMBLY AND USE CAUTION MAKE SURE NO OBSTACLES ARE IN THE DESK S PATH AND ALL CORDS ARE OF APPROPRIATE LENGTH FOR DESK TRAVEL. FAILURE
More informationSM-RAZOR-T-M/L/XL. Strong Low Profile Tilt Mount for Ultra-Thin Flat-Panel TVs INSTRUCTION MANUAL
SM-RAZOR-T-M/L/XL Strong Low Profile Tilt Mount for Ultra-Thin Flat-Panel TVs INSTRUCTION MANUAL WARNINGS: Installation of this product should be done by a qualified professional. Do not begin installation
More informationTheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered.
TheDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com TheDepot.com To create a product innovation is
More informationPHTM200 - Phantom 200 Flat Screen Wall Mount with Wafer Thin Projection Fits Screens up to 50 lbs with 200mm Mounting Patterns
PHTM200 - Phantom 200 Flat Screen Wall Mount with Wafer Thin Projection Fits Screens up to 50 lbs with 200mm Mounting Patterns Features: Durable high quality gloss black baked on powder coat finish Fits
More information7878 K940. Checkpoint Antenna. Kit Instructions. Issue B
7878 K940 Checkpoint Antenna Kit Instructions Issue B Revision Record Issue Date Remarks A July 7, 2009 First issue B Nov2013 Revised the Checkpoint installation procedures for 7878 and 7874 scanners Added
More informationAnalyst ils. Fixture Manual. Analyst ils Fixtures Slide 1
Analyst ils Fixture Manual Analyst ils Fixtures Slide 1 Table of Contents Fixture Kit Overview PCA (UUT) Guidelines UUT Examples Board Conveyor Fixture Stack-up & Dimensions Probe Plate and Tooling Pins
More informationUSER MANUAL. MODULAR TBUS-6xl Table Connection Bus MODEL: P/N: Rev 3
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: MODULAR TBUS-6xl Table Connection Bus P/N: 2900-300073 Rev 3 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Glossary
More informationSECTION ELECTRICAL IDENTIFICATION
SECTION-16075 ELECTRICAL IDENTIFICATION PART 1 GENERAL 1.01 SECTION INCLUDES A. Electrical identification to identify all electrical items for easy operation and maintenance including, but not limited
More informationABM International, Inc.
ABM International, Inc. Lightning Stitch required 1 1.0: Parts List head and motor assembly (Qty. 1) Reel stand (Qty. 1) Needle bar frame clamp (Qty. 1) Motor drive (Qty. 1) 2 Cable harness with bracket
More informationFLEXRISE2 VERSION. 2 LEG / 2 MOTOR ELECTRIC TABLE BASE (36 to 72 ) **PATENT PENDING**
FLEXRISE2 2 LEG / 2 MOTOR ELECTRIC TABLE BASE (36 to 72 ) VERSION A INSTRUCTION MANUAL CONTENTS: FLEX-MU-2L3S-C3672-K4# FEET-ADJ-UNV-2430# **PATENT PENDING** MAX Load 265 lbs (120 KG) Equally Divided MAX
More informationS6 User s Manual USER S MANUAL ver. 1.0
S6 User s Manual SKEETER - 1U LOW PROFILE SOLUTION Table of Contents Tabletop Configuration 2 Tabletop Configuration Accessories 4 Slide Configuration 5 slide configuration accessories 7 rack Mount configuration
More informationFS-526 Finisher INSTALLATION MANUAL
Applied Machines: C652/C552 COLOR MFP: 65 ppm/55 ppm Product Code: A0P0/A0P FS-526 Finisher INSTALLATION MANUAL Lifting the machine in an awkward position or transporting it in a poorly balanced position
More informationTilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM
Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /
More informationINSTALLATION GUIDE. Version 2.0
INSTALLATION GUIDE Version 2.0 INTRODUCTION Carefully read these instructions to assure proper installation and performance of the GatorDeck TM. TOOLS NEEDED 1. Calibrated test weights 2. Phillips screwdriver
More informationPrimare A32 Amplifier User Guide
> Primare A32 Amplifier User Guide i 0 Preface.pm7 1 > Preface COPYRIGHT AND ACKNOWLEDGMENTS Copyright 2005 Primare Systems AB. All rights reserved. Primare Systems AB Renvägen 1 SE-352 45 Växjö Sweden
More informationPROFILE Flat Panel Console System Installation Manual
PROFILE Flat Panel Console System Installation Manual Table of Contents Page Introduction... 2 Important Safety Information...3, 4 Installation Overview... 4, 5, 6 Single Sided/Single Unit... 7 Double
More informationMounting Hardware Guide
Mounting Hardware Guide by The key to a successful and trouble-free installation is the selection of appropriate mounting hardware. Versa-Gard offers the most comprehensive array of mounting hardware for
More informationINSTALLATION MANUAL FLAT LCD DISPLAY MOUNT MODEL
INSTALLATION MANUAL FLAT LCD DISPLAY MOUNT MODEL CMK Ceiling WARNING! The wall, floor or ceiling should be capable of supporting a weight of at least five (5) times the monitor s weight. If it cannot,
More informationECLIPSE: TV COVER INSTALLATION GUIDE
ECLIPSE: TV COVER INSTALLATION GUIDE 1 Congratulations on purchasing your Eclipse Vanishing TV Mirror! Installing your TV into the Eclipse Mirror is a very simple process following these instructions.
More informationV00029KX READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID
READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID Net-Verse D-Type Cabinets Tool List 10mm Socket Wrench 122mm (48 ) Level 19mm Wrench 8mm Hex Drive T25 Torx driver Net-Verse D-Type
More information1) Place the reactor stand on a sturdy bench with the bottom plate facing toward the front.
Assembly Instructions for ChemRxnHub Reactor Systems 1) Place the reactor stand on a sturdy bench with the bottom plate facing toward the front. Loosen knobs on the right and left using 2 hands of the
More informationInstallation and Assembly: In-wall Mount for 32" to 71" Flat Panel Displays
Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Displays Model# Display size range IM760P, IM760P-S 32" to 71" (81 to 180 cm) IM760PU, IM760PU-S 32" to 65" (81 to 165 cm) This product
More informationTOA PROFESSIONAL POWER AMP
Operating Instruction Manual TOA PROFESSIONAL POWER AMP Model P-150M, P-300M TOA ELECTRIC CO, LTD. KOBE, JAPAN Contents Precautions... 2 General Description... 2 Features... 3 Specifications... 4~5 Performance
More informationLCD/Plasma Mount Manual
LCD/Plasma Mount Manual Product Overview: Thank you for your Cheetah Mount purchase. All Cheetah Mounts are designed to provide excellent function, high quality, easy installation and stylish appearance.
More informationINSTALLATION GUIDE. Flat Panel Arm Mount BTAR2/37. VESA 200x200 compatible. Support 24" to 37" Screens Max Load Capacity: 80 lbs (36 kg)
INSTALLATION GUIDE Flat Panel Arm Mount BTAR2/37 Support 2" to 37" Screens Max Load Capacity: 80 lbs (36 kg) VESA 200x200 compatible Note: Read entire instruction sheet before you start installation and
More informationExponents Bench Cushion
Exponents Bench Cushion Power Drill #2 Phillips Bit Bit Holder Page 1 of 2 939500640 Rev A 1. Place cushion on top of the bench, so the black Coalesse tag is in the right rear corner of the bench. 2. From
More informationLinear Hook- on Worksurfaces
Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep
More informationWall mounting bracket
Install Manual Wall mounting bracket Please read this manual carefully before operating your set and retain it for future reference. OSW200 P/NO : MFL63640578 (1502-REV01) www.lg.com COMPONENT Install
More informationCW-Type Wall Mounted Cabinets Installation Instructions
Instruction Sheet 860446194 Issue 2, March 2013 CW-Type Wall Mounted Cabinets Installation Instructions General CommScope wall mount cabinets are available in 24-inch (610mm), 36-inch (914mm) and 48-inch
More informationFML64S ASSEMBLY INSTRUCTIONS
FML64S ASSEMBLY INSTRUCTIONS Please read this instruction manual carefully before assembly Fits 42-84in plasma and LCD TVs Weight Capacity 60kg (32lbs) MetraHomeTheater.com 866-839-987 460 Walker Street
More informationBefore Installation, Re-installation, or Troubleshooting:
The Electric Elite WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY AND PROPERTY
More informationCloset System Installation Manual
Closet System Manual Thank you For choosing our Custom Closet Collection to fit all your needs Closets come fully assembled to make your project an enjoyable and satisfying experience. With quality Custom
More informationPlasma Presenters Cart (PPC-2000)
I N S T R U C T I O N M A N U A L (PPC-2000) The (PPC) is designed to assist the presenter in showrooms, boardrooms, and trade show exhibits. The PPC provides agile mobility for screens weighing up to
More informationmicro DOUBLE TEN SWITCH
micro DOUBLE TEN SWITCH microham fax: +421 2 4594 5100 e-mail: support@microham.com homepage: www.microham.com 5 December, 2011 1 TABLE OF CONTENTS CHAPTER PAGE 1. IMPORTANT WARNINGS... 3 2. DESCRIPTION...
More informationHeavy Duty I-Beam Trolley
Heavy Duty I-Beam Trolley ASSEMBLY INSTRUCTIONS I-BEAM TROLLEY Recommended Tools Level Tape Measure Pencil Drill with 1/8, 1/4, and 3/8, Drill Bits and Phillips Bit Socket Wrench with 9/16 Socket I-BEAM
More informationGalaxy VM. Kit for IP32. Installation 06/
Galaxy VM Kit for IP32 Installation 06/2015 www.schneider-electric.com Legal Information The Schneider Electric brand and any registered trademarks of Schneider Electric Industries SAS referred to in this
More informationInstallation and Assembly: 32" - 60" Flat Panel TV Cart
nstallation and Assembly: 32" - 60" Flat Panel TV Cart Models: SR1M, SR560M R This product is UL Listed. t must be installed by a qualified professional installer. Max UL Load Capacity: 150 lb (68 kg)
More informationProgeny Integrated Mobile Unit Unpacking/Assembly Guide
Summary: The following instruction will guide you through the unpacking and installation of the Progeny Mobile Unit. Any question or concerns or suggestions should be directed to Progeny Technical Support
More informationAll our cabinets are handbuilt to order in the UK and benefit from a five year guarantee. Baseboard (to suit Floor Standing back panel) Continuous top
Media Brochure & Product Guide De-clutter your living space The Media range is a modular furniture system that provides all the elements you need to organise your available space and present a flexible
More informationDX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations
ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3
More informationPRODUCT MANUAL. Phoenix 540/622 Vertical Lift
PRODUCT MANUAL Phoenix 540/622 Vertical Lift CAUTION Safety Warning Moving Parts: Do not obstruct operation of mechanism with fingers or any object. Injury or damage could result. If adjusting the limits,
More informationReplacing the PCM Instruction Sheet
Replacing the PCM Instruction Sheet INTRODUCTION Use the following instructions when replacing or upgrading a Processor Control Module (PCM) in CP2000-ZX and CP2000-M/MR projectors. The entire procedure
More informationWaste/recycle sets. Waste/recycle sets. Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com SERVO-DRIVE BLUMOTION Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX
More informationMONOPRICE. Above Fireplace Pull-Down Full-Motion TV Wall Mount. User's Manual P/N 27773
MONOPRICE Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 27773 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
More informationPHTM100 - Phantom 100 Flat Screen Wall Mount with Wafer Thin Projection Fits Screens up to 25 lbs with 100mm or 75mm Mounting Patterns
PHTM100 - Phantom 100 Flat Screen Wall Mount with Wafer Thin Projection Fits Screens up to 25 lbs with 100mm or 75mm Mounting Patterns Features: Durable high quality gloss black baked on powder coat finish
More informationVisit us at or
Features of AFA server rack 1. Disassembled packing, saving shipping space and warehouse storage. 2. Latest out looking design: double section side panels; pluggable front door, rear door and external
More informationC O N C O U R S E Q S E R I E S
R E V.1 C O N C O U R S E Q S E R I E S INSTRUCTION BOOKLET CONCOURSE Q SERIES SUBWOOFER/Q SUB F O R T H E C L O S E S T A P P R O A C H T O T H E O R I G I N A L S O U N D TABLE OF CONTENTS Introduction:
More informationTIGER MOTH 120 ASSEMBLY INSTRUCTIONS
TIGER MOTH 120 ASSEMBLY INSTRUCTIONS SPECIFICATIONS Wing Span: Length: Radio: Flying Weight: 1920mm 1580mm 4 channel with 6 servos 4200g AILERON ASSEMBLY 1 Start by removing the servo cover from the bottom
More informationDOWNLIGHT LED SERIES INSTALLATION INSTRUCTIONS
WARNING: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Make sure all
More informationConcealed Shallow tab 17.3 (.68) 11 (.44) 86 (3.38) 44 (1.72) 8 (5/16) Hex wrench opening (.252) 2 PL. Receptacle panel. Latch. panel Ø13 (.
22 R2 Draw Concealed Shallow tab High tensile Suited for thin panels Ø 5 (.196) (.).3 (.6).5 Average ultimate tensile : *13.5.5 Average ultimate shear : 900 N (2000 lbf) Install assembly with M5 (No. 10)
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationInstallation and Assembly: In-wall Mount for 32" to 71" Flat Panel Screens
Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Screens Model# IM760P, IM760P-S IM760PU, IM760PU-S Screen size range 32" to 71" (81 to 180 cm) 32" to 60" (81 to 152 cm) IM760P IM760P-S
More informationFOLDING WORKBENCH MODEL NO: CFWB1 ASSEMBLY INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS LS ISS 2
FOLDING WORKBENCH MODEL NO: CFWB1 PART NO: 6501580 ASSEMBLY INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0418 - ISS 2 INTRODUCTION Thank you for selecting this Clarke folding workbench. Read this manual before
More information