The solder feed time and speed can be set. Soldering related equipment and materials/solder feed system
|
|
|
- Amos Jacobs
- 5 years ago
- Views:
Transcription
1 Soldering related equipment and materials/solder feed system Automatic solder feeder with the solder balling preventive function V-groove put on solder surface reduces the splash of solder and flux Solder feed time and speed are settable Available in: The solder feed time and speed can be set. Can adjust solder feed time and feed speed with the control knobs. Can control solder feed amount by a combination of solder feed time and feed speed. Operate in AUTO or MANUAL mode AUTO MODE : If you press the feed switch, solder will be fed with set time and speed independently of length of pressing time. MANUAL MODE : Solder will be fed with set speed during pressing the feed switch.
2 With the solder return mechanism After feed solder, the specified length of solder can be returned. Soldering robots may need this solder return function. Amount of solder return is adjustable within 0 to 5 mm. Automated solder feeding and solder/flux splash prevention Minimize solder and flux splash As shown below, when solder is cut with a V-groove it enables the release of gas pressure generated by the flux, thereby suppressing splash. However, because the V-groove exposes the flux to outside air the solder cannot be stored for a long period of time. When using solder with the HAKKO 374, you can groove the solder that you require. HAKKO Document Portal You can browse and download "Instruction Manuals" and "SDS" freely. Even "Engineering Documents"are available once you complete user registration. Inquiry form Soldering for one-handed operation For applicable soldering irons or the part numbers of option parts, click here.
3 Soldering with a feeder pen For the part numbers of feeder pen or option parts, click here.
4 Applicable Soldering Iron Station HAKKO FM-203 HAKKO FM-206 Solderin iron * Click on the following link below jump to the table of the optional parts. For HAKKO FM-2027 For HAKKO FM-2030 HAKKO FX-801 For HAKKO FX-8002 HAKKO FX-838 For HAKKO FX-8301 Station type HAKKO FR-701 HAKKO FR-702 HAKKO FX-888 (Discontinued) HAKKO FX-888D HAKKO FX-889 For HAKKO FX-8801 For HAKKO FX-8805 HAKKO FX-950 HAKKO FX-951 HAKKO FX-952 For HAKKO FM-2028 HAKKO 928 (Discontinued) For HAKKO 900M For HAKKO 900L
5 * Not available for HAKKO 900S HAKKO 931 (Discontinued) HAKKO 932 (Discontinued) For HAKKO 902 (Discontinued) HAKKO 929 (Discontinued) HAKKO 936 (Discontinued) HAKKO 937 (Discontinued) HAKKO 701 (Discontinued) HAKKO 942 (Discontinued) For HAKKO 904 (Discontinued) For HAKKO 907 For HAKKO 908 * Not available for HAKKO 900S * If you prefer gun type, HAKKO 958/959 are recommended for one-hand soldering with automatic solder feeding. For HAKKO 912 (Discontinued) * Available only when attaching Long nipple Ceramic heater type HAKKO DASH (Discontinued) For N452/453 For N454 HAKKO MACH-I (Discontinued) For 918 For 920/921/922 Hints On Use 1.I want to use the HAKKO 374 for a different solder diameter. Change all of the driving/following pulley assembly, supply nozzle, guide pipe assembly, and tube unit. 2.I want to change the soldering iron used with the HAKKO 373/374. Change the iron holder, guide pipe assembly, and tube unit if they are not compatible with the soldering iron to be used. Soldering for one-handed operation Optional parts required: Tube Unit Guide Pipe Assembly Soldering Iron:FM-2030 Tube Unit B3477 B Guide Pipe Assembly B3726 B3727 B3728 B3729 -
6 Soldering Iron:FX-8002 Tube Unit B3477 B Guide Pipe Assembly B5072 B5073 B5074 B Soldering Iron:FX-8301 Tube Unit B3563 B3564 B3565 Guide Pipe Assembly B3566 B3567 B3568 B3569 B3571 Soldering Iron:FM-2027 and FM-2028 Tube Unit B3477 B Guide Pipe Assembly B3481 B3482 B3483 B Soldering Iron:900M, N452 and N453 Tube Unit B1631 B1672 B2125 Guide Pipe Assembly B1674 B1675 B1676 B1677 B2119 Soldering Iron:900L and N454 Tube Unit B1631 B1672 B2125 Guide Pipe Assembly B1679 B1680 B1681 B1682 B2120
7 Soldering Iron:902 and 904 Tube Unit B1957 B1958 B2127 Guide Pipe Assembly B1694 B1695 B1696 B1697 B2123 Soldering Iron:FX-8801 and 907 Tube Unit B2143 B2144 B2145 Guide Pipe Assembly B2146 B2147 B2148 B2149 B2156 Soldering Iron:FX-8805 and 908 Tube Unit B2143 B2144 B2145 Guide Pipe Assembly B2151 B2152 B2153 B2154 B2157 Soldering Iron:912 (Available only when attaching Long nipple) Tube Unit B3479 B Guide Pipe Assembly B3481 B3482 B3483 B Soldering Iron:918 Tube Unit without switch B1632 B1673 B2126 Guide Pipe Assembly B1689 B1690 B1691 B1692 B2122
8 *A foot switch is available separately. Soldering Iron:920, 921 and 922 Tube Unit without switch B1632 B1673 B2126 Guide Pipe Assembly B1684 B1685 B1686 B1687 B2121 *A foot switch is available separately. Soldering with Feeder pen Optional parts required: Feeder Pen Switch As for the switch, please choose either Foot switch or Feeder switch as below. Feeder Pen C1234 C1235 Switch Foot Switch B1649 Feeder Switch B2124
The solder feed time and speed can be set. Soldering related equipment and materials/solder feed system
Soldering related equipment and materials/solder feed system Automatic solder feeder that enables a user to complete soldering work just with one hand Solder feed time and speed are settable Available
Thermal Wire Stripper
Thermal Wire Stripper Thermal Wire Stripper Blade not included Thermal wire stripper that ensures clean-cut removal of wire insulation High stripping perfmance ensures clean cut through highly heat-resistant
Self Feeder. Soldering-Related Equipment and Materials. V-Groove Maker. Features. Packing List. Specifications. Option
Self Feeder V-Groove Maker Features Minimize solder and flux splash Cutting a V-groove on the solder surface enables the release of gas pressure generated by the flux, thereby suppressing splash. HAKKO
Soldering iron. Analog type of HAKKO FX-951 Lock key enables temperature control even on this analog type unit Supports the N 2 system.
Soldering iron Analog type of HAKKO FX-951 Lock key enables temperature control even on this analog type unit Supports the N 2 system. Model No. FX950 Power consumption 75W Temperature range 200-450ºC
Solder feed unit. Instruction Manual
Solder feed unit struction Manual Thank you for purchasing the HAKKO FU-500 solder feed unit. Please read this manual before operating the HAKKO FU-500. Keep this manual readily accessible for reference.
Self-Feeder Soldering Station DSF76D-IW. Operation Manual
Self-Feeder Soldering Station DSF76D-IW Operation Manual Thank you for purchasing the Self-Feeder Lead Free Soldering Station. Please read this manual before operating the unit. Store this manual in a
Soldering Station. Power consumption 140W Temperature range ºC Temperature stability ±5ºC at idle temperature. Station
Soldering Station Soldering station with two irons (Two-iron type of HAKKO FX-951) Two different soldering iron tips selected according to component sizes can be simultaneously used. Temperature on each
Binks Spray Gun Extensions
Binks Spray Gun Extensions Use genuine Binks Spray Gun Extensions for conventional, HVLP, airless and specialty applications EA52-100 EXTENSION INDEX Extension Type Use Page Conventional Circular Spray
Soldering iron. Multi-station that enables soldering, desoldering, and SMD rework all with a single unit Supports the N 2 system.
Soldering iron Multi-station that enables soldering, desoldering, and SMD rework all with a single unit Supports the N 2 system. Model No. FM203 Power consumption 140W Temperature range 200-450ºC Temperature
V-SOLDER BON-8103/8203. V-cut solder machine. Applicable solder wire diameter 0.3 ~ 0.8 mm
V-SOLDER BON-8103/8203 V-cut solder machine Applicable solder wire diameter 0.3 ~ 0.8 mm User s manual Preparation in June 2017 The 2 nd edition JAPAN BONKOTE CO., LTD. Contents page 1. Preface 1 2. Notes
WX8800 WX8700 LX5801 WX8842 WX MC30
WX8800 WX8700 LX5801 WX8842 WX8842-1 MC30 First published : August 1991 Third edition : August 2004 No. 040037 INTRODUCTION Thank you for your purchasing Kansai Special's WX Series. Read and study this
INSTRUCTION BX1425P,PSM,PTV BX1433P,PSM,PTV BX1025P,PSM BX1033P,PSM. No First published : November 1997
INSTRUCTION Industrial Sewing Machines BX1425P,PSM,PTV BX1433P,PSM,PTV BX1025P,PSM BX1033P,PSM First published : November 1997 No. 970112 INTRODUCTION Thank you for your purchasing Kansai Special's BX
First published : May 1997 Fourth edition : January No
First published : May 1997 Fourth edition : January 2006 No. 050153 INTRODUCTION Thank you for your purchasing Kansai Special's FX Series. Read and study this instruction manual carefully before beginning
Assembly and User Guide
Assembly and User Guide AtariPunkr is an adjustable stepped tone generator. AtariPunkr provides hours of fun everyone! Powered by: 9V Battery Outputs: Mylar Speaker (Included) Stereo Output (3.5mm Jack)
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS No Hose or Cable Wrapup Regardless of Direction of Rotation. Oxy-Fuel Cutting Units. Plasma Cutting Units. Welding Units. CYPRESS WELDING
Torch Consumables. - air cooled torch systems - Power Joint Power Joint Lite Frontpull 8i Power Clutch Frontpull 7 Wire Select
Torch Consumables Power Joint Power Joint Lite Frontpull 8i Power Clutch Frontpull 7 Wire Select - air cooled torch systems - Power Joint Power Joint Lite Frontpull 8i Power Clutch Frontpull 7 Wire Select
INSTRUCTION. Industrial Sewing Machines V7100/D,DE,F,ML W8100/D,DE,F,C W8042 W V7002-1S W8103-1S. No Third edition : March 2001
INSTRUCTION Industrial Sewing Machines V7100/D,DE,F,ML W8100/D,DE,F,C W8042 W8042-1 V7002-1S W8103-1S Third edition : March 2001 No. 010012 INTRODUCTION Thank you for your purchasing Kansai Special's V.W
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS No Hose or Cable Wrap-up Regardless of Direction of Rotation. Oxy-Fuel, Plasma Cutting and Welding Units Available. Bug-O Systems is guided
MODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
Plumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
V-Solder. Instruction manual. BON-6002 V-Cut solder machine Solder diameter φ0.6~φ1.6. (User s Manual) Preparation in April 2014.
V-Solder BON-6002 V-Cut solder machine Solder diameter φ0.6~φ1.6 Instruction manual (User s Manual) Preparation in April 2014 The 6 nd edition JAPAN BONKOTE CO.,LTD. 1 Contents 1 Preface 1 2 Notes for
Master-Feeder-System MFS V2
T E C H N O L O g y F O R T H E W E L d E R S W O R L d. Master-Feeder-System MFS V2 High precision... Constant & precise! MFS V2 the wire feeder system for highly automated laser welding and brazing equipment.
FBX-PA-2AC. Third edition : April No
FBX-PA-2AC Third edition : April 2006 No. 060058 INTRODUCTION Thank you very much for purchasing Kansai Special FBX series. Read and study this Instruction Manual carefully before you start any of the
Delta Rostock mini G2& G2s Building instruction
Delta Rostock mini G2& G2s Building instruction Safety Instructions ShenZhen GETECH CO.,LTD Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara. Price List w.e.f. 06/02/2015
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 731.60 b 2 " GM 778 No 1107.39 c 2.5 " GM 778 No 1483.17 d 3 " GM 778 No 1858.95 e 4 " CI 14846 No 2610.50 f 5 " CI 14846 No 3362.06 g 6 " CI 14846 No
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 671.11 b 2 " GM 778 No 1015.83 c 2.5 " GM 778 No 1360.54 d 3 " GM 778 No 1705.26 e 4 " CI 14846 No 2394.67 f 5 " CI 14846 No 3084.09 g 6 " CI 14846 No
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 661.04 b 2 " GM 778 No 1000.59 c 2.5 " GM 778 No 1340.13 d 3 " GM 778 No 1679.68 e 4 " CI 14846 No 2358.75 f 5 " CI 14846 No 3037.83 g 6 " CI 14846 No
TIP TIP - HOTWIRE WP 20 SC TORCH. Materials: Steel/Stainless/Aluminum Duty Cycle: 280A / 100%
TIP TIP - HOTWIRE WP 20 SC TORCH Materials: Steel/Stainless/Aluminum Duty Cycle: 280A / 100% COMPLETE TORCH ASSEMBLY 20002480 TIP TIG WP 20 FLEX HEAD SC TORCH ASSY WITH ORANGE LINER (14ft) 20002483 TIP
FBX1104P FBX1104 FBX1106P FBX1106
FBX1104P FBX1104 FBX1106P FBX1106 Second edition : September 2004 No. 040037 INTRODUCTION Thank you for your purchasing Kansai Special's FBX Series. Read and study this instruction manual carefully before
Handler 140 And H100S2-10 Gun
TM-925E 2010 07 Handler 140 Eff. w/serial LH011259Y and following Processes MIG (GMAW) Welding Flux Cored (FCAW) Welding Description Arc Welding Power Source And Wire Feeder Handler 140 And H100S2-10 Gun
Chicago Electric MIG B Gun Install
Chicago Electric MIG 180 81295B Gun Install Step 1 First you will need to remove all the side panels on your machine. This is necessary to access everything for this install. Step 2 On the side with your
Handler 190 And H100S4-10 Gun
TM-248 841A 2011 06 Eff. w/serial MB230302Y Processes MIG (GMAW) Welding Flux Cored (FCAW) Welding Arc Welding Power Source And Wire Feeder Handler 190 And H100S4-10 Gun SECTION 1 PARTS LIST Hardware is
Welding & Fabrication Tools FT-Flat Electrode Welding
Welding & Fabrication Tools FT-Flat Electrode Welding Instruction Manual The Next Step in Belting Welding & Fabrication FT-Flat Electrode Welding Table of Contents Page How to Use this Manual 3 Symbols
1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
SOLDERING / standard and special low temperature alloys and lead-free alloys ranges: C
SOLDERING / standard and special low temperature alloys and lead-free alloys ranges: 100... 350 C Fig.1.a: Simultaneous soldering of the two coil wire ends to terminals using a Spirflame generator and
JORGENSON MACHINE TOOLS
JORGENSON MACHINE TOOLS A JORGENSON COMPANY DRILL PRESS Jorgenson Machine Tools. 2895 South 300 West Salt Late City, UT 84115 Tel: 801-493-0151 Fax: 801-493-0157 Toll Free: 800-952-0151 Email: sales@jorgensoncompanies.com
TIP TIP - HOTWIRE WP 20 SC TORCH. Materials: Steel/Stainless/Aluminum Duty Cycle: 280A / 100%
TIP TIP - HOTWIRE WP 20 SC TORCH Materials: Steel/Stainless/Aluminum Duty Cycle: 280A / 100% COMPLETE TORCH ASSEMBLY 10002480 TIP TIG WP 20 FLEX HEAD SC TORCH ASSY WITH ORANGE LINER (14ft) $995.00 ea.
Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
Soldering and Desoldering Instruction
Soldering and Desoldering Instruction Soldering is defined as "the joining of metals by a fusion of alloys which have relatively low melting points". In other words, you use a metal that has a low melting
Universal Pipe Cutter (UPC) Replacement Parts Booklet
Universal Pipe Cutter Universal Pipe Cutter (UPC) Booklet Table of Contents Drawing Number U U U U U U U U8 U9 U0 U Description UPC Front View UPC Pneumatic Rear View UPC Hydraulic Rear View UPC Mainframe
Instructions for Lighting an S Scale Caboose
Instructions for Lighting an S Scale Caboose The S Scale Caboose lighting kit is adaptable for most caboose models of rolling stock including American Flyer (TM) and contains the same components as found
Syddansk Universitet. Industrial Assembly Cases
Syddansk Universitet Industrial Assembly Cases Ellekilde, Lars-Peter; Buch, Jacob Pørksen; Iversen, Thorbjørn Mosekjær; Laursen, Johan Sund; Mathiesen, Simon; Sørensen, Lars Carøe; Kraft, Dirk; Savarimuthu,
Micro Automation- Model 1006 Dicing Saw Instructions. Serial # Rev 2 ( R.DeVito) Location Chase 1
Micro Automation- Model 1006 Dicing Saw Instructions Serial # Rev 2 (12-23-05 R.DeVito) Location Chase 1 Dicing Saw Instructions (Revised 8/9/03 - K.J) 1. On the Log Sheet sign in, including Name and Date.
Key Tips & Techniques for Taking Care of Solder Iron Tips
Key Tips & Techniques for Taking Care of Solder Iron Tips 1 Tip Construction Copper Core Iron Plating Nickel plating over the Iron Chrome plating over the nickel Tin over Chrome plating 2 What is in a
PRECISA 201 page 41. Torches MIG/MAG page 42 Wear parts for MIG/MAG torches page 43
CHAPTER welding WELDING Transformer technology power sources EASYMIG 0 / / / DUAL page MAXISTAR 0 M / 00 M / 0 T / 0 T page BLUMIG C / C / C / C / C / C page BLUMIG 0 S / S / 0 S / 0 S page TF 00 / 00
Welding & Soldering. Hakko FA-400 Soldering Fume Absorber Ultimate in Bench-Top Extraction Kit includes 2 Filters (Replacement Filters Available)
12 Section 12 Welding & Soldering Electric Soldering Part No Soldering Iron 20 Watt Micron Burn Proof Rubber Lead 1.6mm Replacement tip to suit Micron 20 Watt Soldering Iron Soldering Iron Stand Heavy
Highest Value-For-Money Digital oldering Station Model DSSLF04HESD. Versatile production horse for different soldering applications, low running cost
Highest Value-For-Money Digital oldering Station Model DSSLF04HESD Versatile production horse for different soldering applications, low running cost Salient Features Power/Control unit has in-built following
Geeetech Delta Rostock mini G2 pro / G2s pro Building Instruction
Geeetech Delta Rostock mini G2 pro / G2s pro Building Instruction (Document version: 04-11, 2016) CONTENT Safety Instructions... 1 Preparation... 2 1 Base Assembly... 3 1.1 Motor holder assembly... 3 1.2
Code Product Qty 1 Top Vertex 3 2 Hot End Housing 1 3 Bottom Vertex 3 4 Print Platform Lock 3 5 End Stop Holder 3 6 Filament Feeder Motor Bracket 1 7
List of Parts Code Product Qty 1 680mm Extrusion 3 2 Power Supply 1 3 240mm Extrusion 9 4 42mm Nema 17 Stepper Motor 3 5 Slider-Hotend Connecting Rod 6 6 48mm Nema 17 Stepper Motor 1 7 Linear Rail with
C A T a L O G U E CLASSIC
C A T a L O G U E CLASSIC THE STRENGTH OF EXPERIENCE Ever since 1929, JBC s sole aim has been to leave no stone unturned in striving to satisfy its customers, for that is what our company is all about.
(12) Patent Application Publication (10) Pub. No.: US 2003/ A1
(19) United States (12) Patent Application Publication (10) Pub. No.: US 2003/0062354 A1 Ward US 2003.0062354A1 (43) Pub. Date: (54) (76) (21) (22) (60) (51) (52) WIRE FEED SPEED ADJUSTABLE WELDING TORCH
Volume Control PJ AN
- AN Page 1 of 9 1. Handling Handle the VC by the body to avoid mechanical stress to the leads. 2. Tools Proper tools should be used for cutting and bending, such as sharp cutters and soft-sided tweezers.
Deltaweld 350 Systems
Deltaweld 350 Systems Issued Sept. 2018 Index No. DC/16.5 MIG Welding Systems Quick Specs Heavy Industrial Manufacturing General manufacturing General fabrication Structural steel fabrication Transportation
0Introduction. TECHNICAL DOCUMENTATION 20/02/2009 PRESSURE Brake pressure PSI
TECHNICAL DOCUMENTATION 20/02/2009 PRESSURE Brake pressure Notes: technical documentation, dimensions and pinout of brake pressure sensors sensors 0-2000 PSI Release 1.01 0-2000 PSI 0Introduction 0-2000
Wire feeding systems for welding applications
Wire feeding systems for welding applications The perfect drive package! u precise wire feeding u modern drive concept u fully digitalized process control u detailed monitoring u maximum production reliability
accessories The perfect complement for soldering and desoldering jobs
accessories The perfect complement for soldering and desoldering jobs 44 KN- Nitrogen kit This is the ideal solution for improving the quality of any solder joint by using nitrogen because it provides
Welding 12 & Soldering
12 Welding & Soldering Electric Soldering Soldering Iron 2 Watt K&W Burn Proof Silicone Lead P733 $20.0 $18.0 Replacement Tip to Suit K&W 2 Watt Soldering Iron P7 $.13 $3.72 Weller WES1D Soldering Station
Premium Auto Feed System. Products and Solutions for Assembly
Premium Auto Feed System Products and Solutions for Assembly About ASG We are personally committed to understanding and exceeding our customers requirements. We are committed to continuously improving
e d u c a t i o n Detect Dark Line Objectives Connect Teacher s Notes
e d u c a t i o n Objectives Learn how to make the robot interact with the environment: Detect a line drawn on the floor by means of its luminosity. Hint You will need a flashlight or other light source
SMT Guidelines. Module de-soldering and rework_ugd_v1.01
SMT Guidelines Module de-soldering and rework_ugd_v1.01 Document Title: SMT module de-soldering and rework Guidelines Version: 1.01 Date: 2008-12-07 Status: Document Control ID: Release Module de-soldering
CHAPTER5 5 ZERO DEFECT MANUFACTURING IN THE PRODUCTION OF IMPELLER THROUGH THE APPLICATION OF CAD / CAE
33 CHAPTER5 5 ZERO DEFECT MANUFACTURING IN THE PRODUCTION OF IMPELLER THROUGH THE APPLICATION OF CAD / CAE 5.1 INTRODUCTION In the first place of research, CAD/CAE was applied to achieve ZERO DEFECT MANUFACTURING
WELDING FABRICATION. First, download and review the General Regulations at: updates.skillsusa.org.
WELDING FABRICATION PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of fabrication. First, download
Parts List: VBS-3612 Band Saw
Parts List: VBS-3612 Band Saw (refer to breakdowns on pages 35 and 36) Index No. Part No. Description Size Qty 1... VBS3612-101...Gear Box... 1 2... TS-0209101...Socket Head Cap Screw...3/8-16 x 2-1/4...
12. Mechanical Drawings & Parts Breakdown List
12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.
S/P/A MACHINE TORCHES
7» OT 360 G p. 9» OT 500 W p. 11» OT 500 WHD p. 13 8 S/P/A Machine Torches are specially designed for use in automatic applications particularly in orbital welding processes using solid wire (GMAW) or
SubArc Digital Series
Digital Series Issued Oct. 016 Index No. AD/7. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes
!"#$%&'()'*"+,+$&#' *"; Assembly Instructions
Assembly Instructions Note: Prior to assembly, be sure to remove all printing pads from the printed parts and also be sure to sort through and organize all of your hardware before assembly this will help
MINI PARALLEL REMOVER. Instruction Manual
MINI PARALLEL REMOVER Instruction Manual Thank you for purchasing the FM-2023 mini parallel remover. Please read this manual before operating the FM-2023. Keep this manual readily accessible for reference.
Multi talented! "THE NEW GENERATION" SATAjet the versatile spray gun series. SATAjet 1000: Allround paint spray guns for craft and industry
SATAjet 1000 - the versatile spray gun series Multi talented! SATAjet 1000: Allround paint spray guns for craft and industry High speed application Fine atomisation Optimum finish results in all fields
Bodyspray INSTALLATION INSTRUCTIONS
Bodyspray P22077 P22079 2014 KALLISTA 1 of 8 THANK YOU FOR CHOOSING KALLISTA Bodyspray We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you
Millermatic 211 Auto-Set w/mvp
TM-240 046H 2012 10 Processes MIG (GMAW) Welding Flux Cored (FCAW) Welding Arc Welding Power Source And Wire Feeder Millermatic 211 Auto-Set w/mvp Eff w/lj330001n And Following For OM-239 988 Revision
Description. Order TECHNICAL SPECIFICATIONS
SEMIAUTOMATIC WIRE FEEDERS Semiautomatic, Constant Speed Wire Feeder The is a semiautomatic constant speed wire feeder providing dependable performance and reliable operation, making it ideal for shop
Multi Function Feeder
Multi Function Feeder Stand Alone Wire Feeders Document no.: DOC-0156EN Revision: sks0312.en.1.a.bp Multi Function Feeder With the Multi Function Feeder MFF, the industrial proven technology of the PF5
F-5-1a. Concrete Bollards (Detail 1 of 2) WEIGHT: 166kg. WEIGHT: 227kg. WEIGHT: 113kg. WEIGHT: 212kg
Contents F-5-1a Concrete Bollards F-5-1b Concrete Bollards F-5-2 Concrete Bollards with City Logo F-5-3 Cast Iron Bollards F-5-4 Decorative Steel Bollard F-5-5 Swivel P Gate Steel Bollard F-5-6 Steel Bollard
MoTec ECU MoTec Dash User manual for connection with ECU Bridge and SmartyCam
MoTec ECU MoTec Dash User manual for connection with ECU Bridge and SmartyCam Foreword This tutorial helps you connecting ECU Bridge and SmartyCam to MoTec Dash using the CAN Bus. Supported MoTec Dashes
Developed by Sean O Connor
Developed by Sean O Connor This project provides pupils with the opportunity to design a desktop light based on the use of a copper pipe. They will be asked to solve the problem of how to fix the pipe
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies)
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Materials List 28 May 2013 The attached listings outline products we offer and their retail prices as at the above date. We reserve the right
Meter, PD Series JB10-S6, S7
PARTS LIST MEASUREMENT SOLUTIONS Meter, PD Series JB10-S6, S7 Bulletin PO01020 Issue/Rev. 0.1 (7/14) We put you first. And keep you ahead. 2 Bulletin PO01020 Issue/Rev. 0.1 (7/14) Inner Mechanism Item
LED Mounting Techniques
LED Mounting Techniques Contents 1. Introduction 2. Solder Paste Printing 3. LED Placement 4. Reflow Soldering 5. Verification of LED Mounting Performance 6. Others 7. Request 1/13 LED Mounting Techniques
J-CAT STELLAR. Operation Manual
J-CAT STELLAR Operation Manual Thank you for purchasing the J-CAT STELLAR. Read these instructions thoroughly for proper use of this machine. Make sure to read "Safety Notes" before you use machine. This
SubArc Digital Series
Series Issued Feb. 0 Index No. AD/. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes Submerged
The following images illustrate the cutting paths in Gas and Plasma cutting:
CLCAM (common line cam) is a very useful APP for cutting operation like Gas Cutting, Plasma Cutting, Laser cutting and Wire Cut EDM. However the main application is Gas Cutting and Plasma cutting because
WELDING FABRICATION NYS
WELDING FABRICATION NYS PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of fabrication. ELIGIBILITY
Advanced Automation. by the soldering experts. Highest precision. Superior reliability. Increased productivity. All from one source.
Advanced Automation by the soldering experts Highest precision. Superior reliability. Increased productivity. All from one source. WTBR 1000 BENCHTOP ROBOT More than half a century of experience in soldering
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS FMS20 MIXER WITH ATTACHMENT HUB ML-134387 ML-134388 WITHOUT ATTACHMENT HUB ML-134398 ML-134399 FORM 43166 (September 2016) F-43166 (September 2016) - 2-2016 Table of Contents
Advanced Automation. by the soldering experts. Highest precision. Superior reliability. Increased productivity. All from one source.
Advanced Automation by the soldering experts Highest precision. Superior reliability. Increased productivity. All from one source. WTBR 1000 BENCHTOP ROBOT More than half a century of experience in soldering
Volume Control PJ 88 - AN
- AN Page 1 of 10 1. Handling Handle the VC by the body to avoid mechanical stress to the leads. 2. Tools Proper tools should be used for cutting and bending, such as sharp cutters and soft-sided tweezers.
Submerged Arc Welding Equipment
Submerged Arc Welding Equipment Miller Submerged Arc Solutions Built for you to build with you. Miller develops high-quality, reliable welding solutions that deliver exceptional performance for our customers.
SME 2713 Manufacturing Processes. Assoc Prof Zainal Abidin Ahmad
PROSES-PROSES PENYAMBUNGAN - 1 SME 2713 Manufacturing Processes Page 1 Outline 1. Introduction 2. Brazing 3. Soldering 4. Welding 5. Mechanical fasteners 6. Adhesives Page 2 1 1. Introduction Page 3 25
J-CAT COMET Series. Operation Manual
J-CAT COMET Series Operation Manual Thank you for purchasing the J-CAT COMET. Read these instructions thoroughly for proper use of this machine. Make sure to read "Safety Notes" before you use machine.
535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine -Manual Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 0 Cutter Assembly Stop Pin 0 Pin Reamer Assembly Carriage Assembly 0 Stop Screw
3 CHANNEL DUAL / TRIPLE RECTIFIER SOLO HEAD
3ch Head 3 CHANNEL DUAL / TRIPLE RECTIFIER SOLO HEAD FRONT PANEL CHANNEL 1 (GREEN) CHANNEL 2 (ORANGE) Control Function Type Mesa Part# Control Function Type Mesa Part# Gain Pot 593792 Gain Pot 592794 Knob
Main Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
С 800 CASSIDA C 800 HIGH SPEED COIN COUNTER
С 800 CASSIDA C 800 HIGH SPEED COIN COUNTER This manual contains important information on safety measures and operational features. Please read it carefully before operating your coin counter, and keep
ww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE
ww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 the power of experience More than 80 years of
Foil Transfer Starter Kit
EN Foil Transfer Starter Kit About the Foil Transfer Starter Kit You can create high-quality designs by using the pressing tool to apply foil with your cutting machine. Important Safety Instructions WARNING
drive 4X The perfect feeder wire feeder /// simply more /// Perfection is the principle
drive 4X wire feeder The perfect feeder / Perfection is the principle www.multimatrix.info / simply more MULTIMATRIX /drive 4X wire feeder Universal use drive 4X wire feeder With rapid set-up times and
SIM800H Module Manual Soldering User Guide
Document Title: SIM800H Module Manual Soldering User Guide Version: 1.14 Date: 2014-05-05 Status: Document Control ID: Release SIM800H Module Manual Soldering User Guide General Notes SIMCOM offers this
Induction Heater Coil Kit Compact low voltage, high current induction coil
Induction Heater Coil Kit Compact low voltage, high current induction coil Model: CT-400-KIT Features and Specifications High power water cool-able copper coil PCB Layout designed to reduce eddy losses