Wire Wheels Brushes Files & Rasps
|
|
|
- Joella Patterson
- 6 years ago
- Views:
Transcription
1 Wire Wheels Brushes Files & Rasps WIRE WHEELS & BRUSHES Crimped & Knotted Wire Cup Brushes... 1 Crimped & Knotted Wire End Brushes... 2 Crimped Wide Face Wire Wheel Brushes. 2 Crimped Wire Wheels & Brushes Wire Wheel Adaptors Wire Wheels Wire Wheels & Brushes Merchandiser... 5 Scratch Brushes FILES & RASPS American Pattern Files & Rasps File rips File Sets & Merchandiser Swiss Pattern Files & Sets
2 Crimped & Knotted Wire Cup Brushes Balanced Industrial Applications Professional Quality CRIMPED WIRE CUP BRUSHES Brass Coated Heavy duty cup brushes with anchor adapters and threads. Our unique arbor adapters allow selection of correct arbor size or M10 x 1.25 system. Used for roughening, deburring, cleaning, removal of rust, paint or any kind of adherent. Spain WITH PROTECTIVE UARD WIRE ARBOR TRIM MAX. PK / HOLE RPM 2-3/8" 0.012" 3/4" WB67168 Has a protective guard for increased safety. WB67168 WIRE ARBOR TRIM MAX. PK / HOLE RPM 2-3/8" 0.012" 3/4" WB /4" 0.012" Stainless* 1-3/16" WB67174SS 4" 0.012" 1-3/16" WB " 0.012" 1-9/16" WB67173 * Stainless steel wire is used to reduce discoloration *WB67174SS (3-1/4") wheel is stainless steel and corrosion on stainless and aluminum alloys. KNOTTED WIRE CUP BRUSHES Single Row The heavy duty twist knot wire cup brushes with anchor adapters and threads. Our unique arbor adapters allow selection of correct arbor size or M10 x 1.25 system. Used for brushing large surfaces with an aggressive cutting action. 2-3/8" 0.012" WIRE ARBOR TRIM MAX. PK / HOLE RPM Has a protective guard for increased safety. 3/4" WB67180 WB67180 WITH PROTECTIVE UARD Crimped & Knotted Wire Cup Brushes 2-3/8" Stainless* WIRE ARBOR TRIM MAX. PK / HOLE RPM 0.020" 2-3/8" 0.020" 3-1/4" Stainless* 0.020" 4" 0.020" 5" 0.020" 6" 0.020" * Stainless steel wire is used to reduce discoloration and corrosion on stainless and aluminum alloys. 3/4" WB67180SS 3/4" WB " WB67184SS 1-3/16" WB /16" WB /8" WB67184 *WB67180SS (2-3/8") and WB67184SS (3-1/4") are stainless steel -1
3 Crimped & Knotted Wire End Brushes Balanced Industrial Applications Professional Quality Spain CRIMPED WIRE END BRUSHES Small diameter end brushes are designed for use in restricted or hard to reach areas. Excellent for carbon cleaning, finishing for appearance or finish preparation prior to painting or plating. BRUSH WIRE SHANK RADE PK BULK CLAMSHELL 1/2" Coarse 0.008" 1/4" 10 WB67117 WB67117C 1/2" Fine 0.020" 1/4" 10 WB67118 WB67118C 3/4" Coarse 0.008" 1/4" 10 WB67119 WB67119C 3/4" Fine 0.020" 1/4" 10 WB67120 WB67120C 1" Coarse 0.008" 1/4" 10 WB67121 WB67121C 1" Fine 0.020" 1/4" 10 WB67122 WB67122C Clamshell 1 per hang-up clamshell Crimped & Knotted Wire End Brushes KNOTTED WIRE END BRUSHES For hard to reach places. Applications include cleaning cylinder heads, pistons and valve ports, removal of rust, scale, paint, tool polishing, weld cleaning, etc. WIRE SHANK TRIM MAX PK / RPM 3/4" 0.020" 1/4" 1" WB " 0.020" 1/4" 1" WB " Stainless* 0.020" 1/4" 1" WB67176 *WB67176 (1") is stainless steel CRIMPED WIDE FACE WIRE WHEEL BRUSHES with multi-adapter arbor hole Dense, high quality, tempered crimped wire construction. eneral purpose brush for bench or pedestal grinders. Heavy duty, used for surface processing of metal, rubber, wood, plastic, glass, etc. WIRE ARBOR TRIM FACE MAX HOLE WIDTH RPM PK 6" 0.012" Multi- Adapter 1-1/8 3/ WB " 0.012" Multi- Adapter 1-5/8 1-1/ WB " 0.012" Multi- Adapter 2-5/8 1-1/ WB67154 Wheels have telescopic bushing 1/2" - 2" -2
4 Crimped Wire Wheels & Brushes Balanced Industrial Applications Professional Quality Spain CRIMPED WIRE WHEELS All steel construction assures maximum safety and reliability. Applications include deburring, blending, removal of rust, scale, dirt, and finish preparation prior to painting or plating. BORE WIRE MAX PK / RADE RPM BULK CLAMSHELL 3" 1/2" Coarse 0.012" WB67131 WB67131C 3" 1/2" Fine 0.008" WB67132 WB67132C 4" 1/2" Coarse 0.012" WB67133 WB67133C 4" 1/2" Fine 0.008" WB67134 WB67134C 6" 1/2" - 5/8" Coarse 0.012" WB67137 WB67137C 6" 1/2" - 5/8" Fine 0.008" WB67138 WB67138C Clamshell 1 per hang-up clamshell CRIMPED WIRE WHEELS BRUSH WIRE SHANK MAX PK / RADE RPM BULK CLAMSHELL 1-1/2" Coarse 0.012" 1/4" WB67101 WB67101C 1-1/2" Fine 0.008" 1/4" WB67102 WB67102C 2" Coarse 0.012" 1/4" WB67103 WB67103C 2" Fine 0.008" 1/4" WB67104 WB67104C 3" Coarse 0.012" 1/4" WB67105 WB67105C 3" Fine 0.008" 1/4" WB67106 WB67106C 4" Coarse 0.012" 1/4" WB67107 WB67107C 4" Fine 0.008" 1/4" WB67108 WB67108C Clamshell 1 per hang-up clamshell CRIMPED WIRE CUP BRUSHES BRUSH WIRE SHANK PK / MAX RADE RPM BULK CLAMSHELL 2" Coarse 0.012" 1/4" WB67111 WB67111C 2" Fine 0.008" 1/4" WB67112 WB67112C 3" Coarse 0.012" 1/4" WB67113 WB67113C 3" Fine 0.008" 1/4" WB67114 WB67114C Clamshell 1 per hang-up clamshell WIRE WHEEL THREADED ADAPTORS Convert arbor holes to metric M10. Adaptors fit both cup and wheel brushes. Crimped Wire Wheels & Brushes DIMENSIONS PK. to M10 x WB67093 to M10 x WB
5 Wire Wheels Balanced Industrial Applications Professional Quality Spain KNOTTED WIRE WHEELS Designed for tough applications. This high impact action wheel features a quick mount nut and all steel hub construction. Excellent for heavy duty cleaning of rust, scale, weld splatter, plastic, rubber, etc. WIRE ARBOR TRIM FACE MAX PK / HOLE WIDTH RPM 4" Stainless* 0.020" 3/4" 1/2" WB67159SS 4" 0.020" 3/4" 1/2" WB " 0.020" 3/8" 1/2" WB67161 * Stainless steel wire is used to reduce discoloration and corrosion on stainless and aluminum alloys. *WB67159SS (4") is stainless steel STRINER BEAD WIRE WHEELS High impact wheel for stringer bead cleaning. Rugged construction, precision balanced. For use on pipe fabrication, brushing expansion joints & narrow grooves. ENERAL PURPOSE WIRE ARBOR HOLE NO. OF KNOTS KNOT TRIM MAX PK / WIDTH RPM 4" 0.020" 32 1/4" 1-3/8" WB " Stainless* 0.020" 32 5/16" 1-3/8" WB " 0.020" 50 1/4" 1-3/8" WB /8" 0.020" 56 1/4" 1-3/8" WB67199 Wire Wheels *WB67191 (4") is stainless steel The high performance, heavy duty (HD) wheels are popular in the oil and gas industries, providing 2-3 times better life. HEAVY DUTY 4-1/2" 0.020" 36 1/4" 2" WB " 0.020" 56 1/4" 1-3/8" WB /8" 0.020" 76 1/4" 1-3/8" WB67200 PAVEMENT JOINT WIRE WHEEL Used to repair cracks in bridges, airport runways and other concrete and asphalt applications. Fits walk-behind concrete cutting saws. WIRE ARBOR TRIM FACE MAX PK / HOLE WIDTH RPM 12" 0.31" 1" 3-1/8" 3/8" WBPJ12-4
6 Wire Wheels & Brushes Merchandiser 72 Pc. Wire Wheels and Brushes Display Most popular wire wheels and wire brushes for every purpose in handy hang-up package. Each display includes wire rack and header card. Cup Brushes 1/4" Shank 2" Coarse WB67111C 2" Fine WB67112C 3" Coarse WB67113C 3" Fine WB67114C Wire Wheels 1/4" Shank 1-1/2" Coarse WB67101C 1-1/2" Fine WB67102C 2" Coarse WB67103C 2" Fine WB67104C 3" Coarse WB67105C 3" Fine WB67106C 4" Coarse WB67107C 4" Fine WB67108C Description WBM72 72 Pc. planogram contains 3 each: Wire Wheels 1/2" Bore 3" Coarse WB67131C 3" Fine WB67132C 4" Coarse WB67133C 4" Fine WB67134C 6" Coarse WB67137C 6" Fine WB67138C Wire End Brushes 1/4" Shank 1/2" Coarse WB67117C 1/2" Fine WB67118C 3/4" Coarse WB67119C 3/4" Fine WB67120C 1" Coarse WB67121C 1" Fine WB67122C Scratch Brushes WB67194 WB67143 Plastic Handle TYPE DIMENSIONS Crimped Steel Wire 10-1/4" x 5" x 1-1/4" WB67141 Stainless Steel 10-1/4" x 5" x 1-1/4" WB67142 Crimped Brass Wire 10-1/4" x 5" x 1-1/4" WB per pack High wire density for a higher brushing pressure. Narrow shape allows easy access into slots. Available in carbon steel, stainless steel and brass wire. Ergonomic handle and slight bending at the tip make these brushes the ideal tool for use on any kind of surface metal, masonry and wood. ACID BRUSHES TYPE TRIM WB67195 Long handle - 10 per pack Toothbrush type per pack Hardwood Handle WIRE ROWS WB67193 DIMENSIONS Steel Wire 1-1/8" 3 x 19 15/16" x 6" x 13-3/4" WB67194 Stainless Wire 1-1/8" 3 x 19 15/16" x 6" x 13-3/4" WB67195 Long hardwood handle scratch brush with slightly curved handle designed for heavy duty cleaning. SMALL (Toothbrush Type).006 7/16" 3 x 7 7/16" x 7-1/2" WB67193 Stainless Wire Toothbrush-style scratch brush makes a great welder s tool that can be used for a wide variety of cleaning applications. WELDIN TOOTHBRUSHES Wire Wheels & Brushes Horsehair brush with tin handle for cleaning & coating. Plastic handle with hang up hole. TYPE DIMENSIONS TYPE OAL WIDTH TRIM Horsehair Brush Tin Handle Horsehair Brush Tin Handle 144 per pack 6-1/8" x 7/16" x 7/8" AB /8" x 9/16" x 7/8" AB74062 Brass 7-1/4 3/8 7/16 WB67210 Stainless Steel 7-1/4 3/8 7/16 WB per pack -5
7 American Pattern Files & Rasps SCHMIDT Professional Quality FLAT FILES Shape: Rectangular in cross section and tapers towards the point in width. Double cut on both sides, single cut on edges. Usage: Used primarily in plants, machine shops and garages where rapid stock removal of iron and metal is called for. ALUMINUM FILES Shape: Rectangular in cross section and tapers towards the point. Double cut on both sides, and single cut on edges. Usage: Fast cutting tooth design for use on aluminum and other soft metals. Files & Rasps HAND FILES BASTARD SECOND SMOOTH CUT CUT CUT 6" 5/8" x 5/32" 12 F65001A F65006A F65011A 8" 13/16" x 7/32" 12 F65002A F65007A F65012A 10" 1" x 1/4" 12 F65003A F65008A F65013A 12" 1-3/16" x 9/32" 6 F65004A F65009A F65014A 14" 1-3/8" x 5/16" 6 F65005A F65010A Shape: Edges parallel in width and tapered slightly in thickness. Double cut, one safe (uncut) edge. Usage: For work on high alloy tool steels. The safe (uncut) edge allows filing right up to corners. BASTARD SECOND SMOOTH CUT CUT CUT 6" 5/8" x 5/32" 12 F65001 F65006 F " 13/16" x 7/32" 12 F65002 F65007 F " 1" x 1/4" 12 F65003 F65008 F " 1-3/16" x 9/32" 6 F65004 F65009 F " 1-3/8" x 5/16" 6 F65005 F65010 MILL FILES Shape: Rectangular shape. Tapers slightly in width. Sides and edges are single cut. Usage: Most commonly used file for a multitude of applications. It is suitable for sharpening various types of saws and tools, draw filing, and finishing metals. A Mill File is similar to a Flat File except a Mill is single cut and a Flat is double cut. BASTARD SECOND SMOOTH CUT CUT CUT 4" 29/64" x 5/64" 12 F65015 F65016 F " 5/8" x 1/8" 12 F65087 F65092 F " 13/16" x 7/32" 12 F65088 F65093 F " 1" x 3/16" 12 F65089 F65094 F " 1-3/16" x 7/32" 6 F65090 F65095 F " 5/8" x 5/32" 12 F " 13/16" x 7/32" 12 F " 1" x 1/4" 12 F " 1-3/16" x 17/64" 6 F65224 DIAMOND CUT FLAT FILES A very versatile tool. The exclusive Diamond Cut design features two sets of chip breakers which form a diamond pattern. Achieve almost any finish required by simply changing feed pressure. Coarse teeth remove metal faster while the chip breakers leave a smooth finish. Shape: Rectangular in cross section and tapers towards the point in width. Double cut on both sides, single cut on edges. Usage: Used primarily in plants, machine shops and garages where rapid stock removal of iron and metal is called for. BASTARD CUT 6" 5/8" x 5/32" 12 F65001DC 8" 13/16" x 7/32" 12 F65002DC 10" 1" x 1/4" 12 F65003DC 12" 1-3/16" x 9/32" 6 F65004DC DIAMOND CUT HALF ROUND FILES Shape: The Diamond Cut features on the flat side and the Spiral cut on the half round side, tapering towards the point in width. Usage: This combination offers rapid stock removal and smooth finishes on either flat or concave surfaces. 8" 3/4" x 7/32" 12 F65049DC 10" 15/16" x 9/32" 12 F65050DC 12" 1-1/8" x 11/64" 6 F65051DC -6 14" 1-11/32" x 1/4" 6 F65091 F65096 F65101
8 American Pattern Files & Rasps SCHMIDT Professional Quality HALF ROUND FILES Shape: Rounded on one side and flat on the opposite. Both sides are double cut and taper towards the point in width. Usage: The half round side makes this file ideal for rounding out holes. Also used on concave, convex and flat surfaces. KNIFE FILES Shape: Knife blade shaped, double cut on both sides, single cut on the knife edge with safe back (uncut). Usage: Features a long wedge section for working in slots. Primarily used by tool & die makers dealing with acute angles. BASTARD SECOND SMOOTH CUT CUT CUT 6" 5/8" x 5/32" 12 F65048 F65053 F " 3/4" x 7/32" 12 F65049 F65054 F " 15/16" x 9/32" 12 F65050 F65055 F " 1-1/8" x 11/32" 6 F65051 F65056 F " 1-5/16" x 13/32" 6 F65052 F65057 F65062 ROUND FILES - RAT TAILS Shape: Tapers slightly towards the point. Usage: Primarily used to enlarge circular holes, moldings, concave surfaces and rounded grooves. Tapered point adapts to numerous hole sizes. BASTARD SECOND SMOOTH CUT CUT CUT 4" 3/16" 12 F " 1/4" 12 F65020 F65025 F " 5/16" 12 F65021 F65026 F " 3/8" 12 F65022 F65027 F " 1/2" 6 F65023 F65028 F " 5/8" 6 F65024 ALL PURPOSE (HANDY) FILE - Farmers Own Shape: One side double cut for fast stock removal and one side single cut for smoother finishing. One edge single cut and one edge safe (uncut). Usage: Has many purposes such as sharpening hoes, lawn mower blades, sharpening metals and smoothening plastics. BASTARD SECOND SMOOTH CUT CUT CUT 6" 21/32" x 5/32" 12 F65078 F65081 F " 27/32" x 3/16" 12 F65079 F65082 F " 1-1/32" x 1/4" 12 F65080 F65083 F65086 SQUARE FILES Shape: The cross-section is square. It is double cut and tapers towards the point. Usage: For filing square holes, slots, keyways, inside corners and general surface filing. All four sides are equal filing surfaces. BASTARD SECOND SMOOTH CUT CUT CUT 6" 1/4" 12 F65063 F65068 F " 5/16" 12 F65064 F65069 F " 3/8" 12 F65065 F65070 F " 1/2" 6 F65066 F65071 F " 5/8" 6 F65067 F65072 F65077 THREE SQUARE FILES Shape: Triangular tapered files, double cut on both sides and single cut on edges. Angles are 60 O and taper towards the point. Usage: For use in corners and holes, filing angles, taps and cutters. BASTARD SECOND SMOOTH CUT CUT CUT 6" 1/2" 12 F65035 F65040 F " 5/8" 12 F65036 F65041 F " 3/4" 12 F65037 F65042 F65046 Files & Rasps 12" 27/32" 6 F65038 F65043 F " 5/32" x 15/16" 12 F " 5/32" x 15/16" 6 F65191A -7
9 American Pattern Files & Rasps SCHMIDT Professional Quality WOOD RASPS - FLAT Shape: Rasp cut on both sides and single cut on the edges. Width tapers towards point. Usage: Used extensively by cabinet makers, leather workers, and aluminum craftsmen. Bastard cut. CABINET RASPS - HALF ROUND Shape: Rasp cut on flat and rounded sides with single cut edges. Has a larger radius than a regular Half Round File. Usage: Primarily used by cabinet makers, woodworkers, leather and aluminum workers. 8" 13/16" x 9/32" 12 F " 1" x 11/32" 12 F " 1-3/16" x 13/32" 6 F " 1-3/16" x 1/4" 6 F65233 WOOD RASPS - HALF ROUND Shape: Rasp cut on both sides and single cut on edges. Tapers from heel to point in both width and thickness. Usage: Useful for curved and flat wood or soft metal. Used by cabinet makers and furniture craftsmen. 8" 15/16" x 1/4" 12 F " 1-1/8" x 9/32" 12 F " 1-5/16" x 11/32" 6 F65203 SHOE RASP (Four-in-Hand) Shape: One side half round with 1/2 rasp cut and 1/2 double cut. Other side flat with 1/2 rasp cut and 1/2 double cut. Usage: An all-around file used by homeowners, hobbyists, blacksmiths, leather and aluminum workers, etc. Files & Rasps 8" 13/16" x 5/16" 12 F " 1" x 13/32" 12 F " 1-3/16" x 15/32" 6 F65138 FARRIER RASP FILE Shape: Flat with rasp cut on one side and file cut on opposite side. Single cut on edges. Usage: Used by blacksmiths and farriers (horseshoers) for racetrack and riding horses. Rasp teeth shape the hoof, while file teeth are used for finishing nails and shoes. 14" 1-51/64" x 13/64" 6 F65039 PIPELINER FILES - HALF ROUND Shape: Rounded on one side and flat on the opposite side. Usage: For filing weld beads and scaling from pipe. Can be used on convex, concave and flat surfaces. 8" 7/8" x 7/32" 12 F " 1-1/16" x 9/32" 12 F65193 CHAIN SAW FILES - ROUND Parallel with special teeth for fast and smooth sharpening of chain saws. 6" 5/32" (4.0mm) 12 F " 1/8" (3.2mm) 12 F " 7/32" (5.5mm) 12 F65152 CHAIN SAW FILES - FLAT Shape: Rectangular with two round edges and parallel sides. Single cut. Edges are safe (uncut). Usage: For sharpening the flat portion of chain saws " 1-1/4" x 11/32 6 F " 5/8" x 1/8" 12 F " 13/16" x 9/64" 12 F65113
10 American Pattern Files & Rasps SCHMIDT Professional Quality TAPER SAW FILES Shape: Triangular in shape and tapered towards the point. Usage: For filing all types of saws with 60 angle teeth. Single cut edges set and cut for filing gullets between saw teeth. (Single cut sides for hand filing, Double cut sides for use on Saw Filing Machines.) BENT BODY FILES Shape: File tapers towards the end. Usage: Commonly used in the automotive industry for metal finishing and repair work. TYPE 5" Regular 7/16" 12 F " Regular 1/2" 12 F " Regular 9/16" 12 F " Slim 5/16" 12 F " Slim 3/8" 12 F " Slim 7/16" 12 F " Extra Slim 7/32" 12 F " Extra Slim 9/32" 12 F " Extra Slim 11/32" 12 F65148 TPI 14" 1-5/16" x 7/32" 13 6 F " 1-21/64" x 7/32" 20 6 F65332 BODY BUMPIN - FLAT FILES Shape: File tapers towards the end. Usage: Commonly used in the automotive industry for metal finishing and repair work. LON ANLE LATHE FILES Shape: Tapered in width towards point. Single cut with two safe (uncut) edges. Usage: Designed for all metals to achieve a smooth finish. 14" 1-3/8" x 1/4" 6 F " 1" x 1/4" 12 F " 1-3/16" x 17/64" 6 F65187 BODY BUMPIN - HALF ROUND FILES Shape: File tapers towards the end. Usage: Commonly used in the automotive industry for metal finishing and repair work. 14" 1-23/64" x 19/64" 6 F65188 MILLED CURVED TOOTH FILES Shape: Rectangular with parallel sides & two safe (uncut) edges. Usage: For smoothing curved metal surfaces. Used in autobody shops, machine shops, railroad and airport maintenance. 14" 1-3/8" x 3/8" 6 F65335 Files & Rasps T.P.I. FLAT RIID With TAN 8" F " F " 10 6 F62236 FLAT FLEXIBLE Without TAN 8" F " F " 10 6 F62239 MILL BLUNT FILES - TWO ROUND EDES Shape: Rectangular with two round edges and parallel sides. Usage: Used for sharpening mill and circular saws, as well as draw-filing and finishing metals. BASTARD SECOND SMOOTH CUT CUT CUT 6" 5/8" x 1/8" 12 F65240 F65246 F " 13/16" x 9/64" 12 F65242 F65248 F " 1" x 3/16" 12 F65244 F65250 F " 1-13/64" x 7/32" 6 F65245 F65251 F
11 American Pattern Files & Rasps Laminate and Solid Surface Files FAST MILL FILES Shape: Rectangular in cross section. Single cut on both sides for precision cutting. Usage: Laminating files are designed specifically for maximum performance on laminates. ood for edge finishing on plastics and gives a smooth finish. DUAL FILE WITH HANDLE Shape: Double cut on one side for fast filing and single cut on reverse side for precision cutting. One safe edge. Usage: Designed for excellent edge filing of laminates. Long handle for comfort grip during use. 8" 3/4" x 1/8" 12 F " 1" x 9/64" 12 F " 1-1/8" x 11/64" 6 F " 3/4" x 1/8" 12 F " 1" x 9/64" 12 F " 1-1/8" x 11/64" 6 F65323 RAPID CROSS-CUT FILES Shape: Rectangular in cross section. Double cut for fast material removal. Usage: Fastest cut file for a wide range of plastics, laminates and other soft materials. 8" 3/4" x 1/8" 12 F " 1" x 9/64" 12 F " 1-1/8" x 11/64" 6 F65313 Files & Rasps File rips Regular Plastic, Hardwood, Comfort rip and Soft rip Handle REULAR RIP COMFORT RIP SOFT RIP Plated ferrule, ideal for needle files and chain saw files. Soft grip handle comes with five inserts to fit sizes 6" to 14" files. DESCRIPTION DESCRIPTION PLASTIC HANDLE HARDWOOD HANDLE HARDWOOD HANDLE DUAL COMPONENT HANDLE 4" F " - 8" F "- 14" F per pack 4" - 6" F " - 8" F " - 10" F " - 14" F per pack Length x Dia. 2-1/4" x 1-3/8" 1/8" Bore 3/4" Depth 6 per pack F65185 Length 4-3/4" 1 per pack F
12 File Sets Merchandiser An Assortment of Pouched Files with Handles Professional quality files. Handles have a convenient hang-up hole and are in a handy storage pouch. 32 Pc. MERCHANDISER MOST POPULAR S Description 32 Pc. Assorted Merchandiser with 4 each of the pouched files listed below on a 8 prong display. FWD32 Popular Selection Of Open Stock Pouched Files With Handles 10" Bastard Flat F65003AHP 10" Bastard Half Round F65050HP 10" Bastard Round F65022HP 10" Bastard Mill F65089HP 10" Smooth Knife F65086HP 8" Bastard Three Square F65036HP 10" Bastard Wood Rasp F65137HP 10" Farmers own handy file F65191AHP Pouched files are also available individually. FWD32 6 Pc. KEY FILE KIT 6 basic mini files, 4" long in a convenient hang-up plastic case. Popular with locksmiths, mechanics and the electronic trades. Available in sets only. Description 4 Pc. PROFESSIONAL FILE KIT A file for every purpose. Four of the most popular files in a handy hang-up pouch. All files come with handles ready to use. DESCRIPTION 6 Pc. kit contains one each: Flat File Hand File Round File Half Round Square Three Square F65161HS 4 Pc. kit contains one each: 8" Mill Bastard F65088H 6" Slim Taper F65144H F65160HP 6" Round Bastard F65020H 8" Half Round Rasp F65136H Files & Sets DIAMOND NEEDLE FILE SETS 220 rit PIECES PER SET DESCRIPTION 5 5-1/2" OAL F /2" OAL F65198 PIECES PER SET DIAMOND POINT SET DESCRIPTION In Plastic 20 Index Case F /8" Shank -11
13 Swiss Pattern Files Individual Files Swiss Pattern Needle Files are primarily used by jewelers, watchmakers and fine tool and die makers. These are the finest detail files available. Available in Coarse (#0) or Medium (#2) cuts. They are also offered in a 12 Pc. Set. STYLE OAL CUT INDIVIDUAL FILES HAND 6-1/4" 2 F62251 FLAT 6-1/4" 2 F62252 Hand Flat Half Round Three Square Square Round Slitting Crossing Barrette HALF ROUND 6-1/4" 0 F62253 HALF ROUND 6-1/4" 2 F62254 THREE SQUARE 6-1/4" 2 F62255 SQUARE 6-1/4" 2 F62256 ROUND 6-1/4" 2 F62257 SLITTIN 6-1/4" 0 F62258 CROSSIN 6-1/4" 2 F62259 BARRETTE 6-1/4" 2 F62260 KNIFE 6-1/4" 0 F62261 CROCHET 6-1/4" 2 F62262 Knife Crochet HAND WITH ROUND EDE 12 per pack 6-1/4" 0 F62265 Hand with Round Edge Swiss Pattern Files Set contains 1 each of the following styles: Hand, Flat, Half Round, Three Square, Square, Round, Slitting, Crossing, Barrette, Knife, Crochet and Hand with Round Edge. 12 Pc. FILE WALLET SET DESCRIPTION #0 CUT COARSE F65158 #2 CUT MEDIUM F
ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
CRIMPED WIRE WHEELS JET PREMIUM WIRE WHEELS JET premium wire wheels have set the standard in industry as the best performing bench wire wheel for metal applications Heavy wire fill and the best piano wire
FULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
Files and Rasps Machetes Handsaws Hacksaws
Files and Rasps Machetes Handsaws Hacksaws In 1864, the File Company became the first successful manufacturer of machine-made files. Today, is the most recognized brand of files in the world. Over the
PLANES PLANE REPLACEMENT BLADE GUIDE SURFORM TOOL CHART FILES wire brushes 141
FINISHING TOOLS Stanley is proud of its long-standing coitment to manufacturing some of the world s best finishing tools, including its highly regarded and worldrenowned line of hand planes. Stanley has
MASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
sweeps Smooth Surface and Floor Sweeps B % Black Horsehair B-25 Black Horsehair and Synthetic Filament Blend
Smooth Surface and Floor Sweeps sweeps Sweeping fine particulate in homes, stores, institutions and offices. B-24 100% Black Horsehair Exceptional quality horsehair with an oval trim for fine sweeping
Saw, Files, Grinders and Brushes
ß 7005-7008 0 Overall length approx. 295, working length approx. 15, trim height approx. 25. 7005 Smooth, hardened cast steel wire, 0,35 Ø. Wire scratch brushes 7007 Brass wire, fine, 0,15 Ø, crimped.
STEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
Holemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
DRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
CUTTING TOOLS SECTION Q DEALER PRODUCTS, INC TH ST. GRAND PRAIRIE, TX
CUTTING TOOLS SECTION Q DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Section Q INDEX DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Q SECTION INDEX
Drill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)
ICS TING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com FILING TOOLS BURS - SOLID CARBIDE (SA) - CYLINDER SHAPE...27
Product # Type Length Width Cutter Width #4 Bench 10-5/8 in (270 mm) 2-1/2 in (64 mm) 2 in (51 mm) Product # Type Length Width Cutter Width
stanley no. 4 sweetheart smoothing bench plane Iron is made from extra-thick 1/8" (3.18 mm) A2 steel for excellent edge retention. One-piece base and frog virtually eliminate chatter. Cherrywood handle
FITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
Sheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
MECHANICS TOOLS. Back
MECHANICS TOOLS Back FULLER AND FULLER PRO SLIP JOINTS Designed by professionals for professionals, FULLER PRO Slip Joint and Groove Joint Pliers offer a lifetime of performance we guarantee it. The FULLER
Code Desc. Ø mm Ø hole mm. Code Desc. Ø mm Ø hole mm. With wire of corrugated steel. Suitable for removing rust, scale etc.. Employee of grinders.
Circular brush steel wire Corrugated steel wire high strength. Suitable for deburring, satin finishing and polishing, to remove rust and metal cleaning. Code Desc. Ø Ø hole Thickness 3002700 77-150x16
Pliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
tools cutters 524 orderline: larsson side cutters, larsson end cutters tools
cutters larsson side cutters, larsson end cutters Side Cutters: 999 720 Diagonal cutters, pointed jaws (3054) flush cut for wire Ø 0.35-1.00mm 29.75 999 721 Diagonal cutters pointed jaws (3055) regular
Cutting, Grinding and Abrasive Accessories
High quality range of abrasive cutting discs, grinding discs and surface preparation accessories engineered for ultimate performance Universal Diamond Blades Cutting and Grinding Discs The essential construction
BRUSHES WITH SHANK 60 61
60 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0. 0.0 STH 0.0 0.00 ROH 0.0 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 7 9 /8 /8 8,000 0 7.98.
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64
GROBET USA TM. The World Leader of Swiss & American Pattern Files. American Pattern Files Swiss Precision Files Carbide Rotary Files
American Pattern Files Swiss Precision Files Carbide Rotary Files GROBET USA TM The World Leader of Swiss & American Pattern Files American Pattern Files Swiss Precision Files Carbide Rotary Files table
Knotted Shank Brushes
Knotted Shank Brushes Knot Wheel Brushes with Shank 6 mm Ø D A H Z RPM Pack. steel 0.35/0.014" steel 0.50/0.020" stainl. 0.50/0.020" mm /inch mm /inch max. Art. No. Art. No. Art. No. 75 / 3 9 / 3/8 15
THE FULL LINE METAL SPECIALISTS
PRECISION METALS THE FULL LINE METAL SPECIALISTS 6917 West 59th Street Chicago, Illinois 60638 Phone 773/586-8503 Fax 773/586-8556 www.ksmetals.com THE USES ARE ENDLESS!!! Hobby, Craft, DIY, Artist, Architecture,
Flame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
PAINTJOB CATALOGUE HOLLAND IMPORTS INC.
PAINTJOB CATALOGUE HOLLAND IMPORTS INC. OUR STORY FOLLOW US @Holland Imports Inc. @Holland_Imports @Holland Imports Inc. For nearly 50 years, Holland Imports has helped Canadians complete thousands of
Brushware -Cup Brushes -Grinding Wheels -Spindle Brushes -Polishing Mops -Polishing Compounds
BRUSHWARE Brushware -Cup Brushes -Grinding Wheels -Spindle Brushes -Polishing Mops -Polishing Compounds Brushware Brushware Index 180 Brushware Polishing Mops & Bonnets 181 Brushware Polishing Compounds
Power Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Steel Hawg Cutters Threaded Steel Hawg Cutters Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant
+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
GROBET USA. The World Leader of Precision Files and Cutting Tools
GROBET USA The World Leader of Precision Files and Cutting Tools American Pattern Files Swiss Precision Files Carbide Rotary Files High Speed Steel Rotary Files ISO Certification table of contents Welcome
7-1
Tube Cleaning Brushes Fitting Cleaning Brushes available with wire or plastic handle Fitting Cleaning Brushes clean the inside of fittings faster. For plumbing or refrigeration applications. Carbon steel
Steel Construction Tools
F o r P Steel Construction Tools r o f e s s i o n a l s. Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These
Concrete Finishing. Flat Back Finishing Trowel. Round End Finishing Trowels. To order Concrete Finishing
Concrete Finishing Concrete Finishing To order Square End Finishing Trowels 620004 12 x 3 Square End Finishing Trowel 620006 12 x 4 Square End Finighing Trowel 620010 14 x 4 Square End Finishing Trowel
Severance Offers Four Types of Hand Files To Solve Virtually Every Application
are Great for Many Application Filing Deburring Shaping Forming Chamfering Sharpening Smoothing Beveling De-Flashing Trimming and De-Scaling Severance Offers Four Types of To Solve Virtually Every Application
Agricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
BESSEY Training BESSEY Tools North America Alvin Products: Lab Metal, Lab Solvent
BESSEY Training BESSEY Tools North America Alvin Products: Lab Metal, Lab Solvent Page 1-1 Lab Metal A ready to use, aluminum filled metal repair, filler and patching compound. Easy to use Ready to use
Protective titanium nitrite coating. Double-fluted design. No. of Hole Sizes 1/8 to 1/2 13. Drill Diameter Sizes (In.) 1/4 to 7/8 11 1/16
Step Drill Bits 35-511 35-512 35-513 35-514 Trust IDEAL step drill bits for precise, repetitive drilling through the toughest materials including brass, carbon steel, cast iron, stainless steel, and more.
March weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
Tungsten Carbide Burs for Tough Applications
Tungsten Carbide Burs for Tough s TRUST BLUE Design optimized for hand-held applications. Special cut patterns minimize tooth chipping/breakage, splintering and bur head failures. Developed specifically
BY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS
TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS BEAST 10" WET TILE SAW BLADE SIZE: MOTOR CAPACITY: RIP CUT CAPACITY: DIAGONAL CUT CAPACITY: DEPTH OF CUT AT 90 : DEPTH OF CUT AT 45 : BEVEL:
Tools for Plumbing. Introduction
2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
Tel: 20-5-8 / Fax: 20-59-7 50 Huyler St / So. Hackensack, NJ 070 USA JIG AND RECIPROCATING Starrett offers industrial quality high speed steel edge bi-metal saw blades. These blades have a high speed steel
MAXWELL TOOLS CO. Mfrs of Milling Cutters; Gear Cutters; Gear Hobs; Gear Shapers; Broaches
ISO 9001 : 2008 Certified MAXWELL TOOLS CO. Mfrs of Milling Cutters; Gear Cutters; Gear Hobs; Gear Shapers; Broaches # 3, Industrial Estate, RAJPURA - 140 401 Tel. +91 1762-224427, Fax : +91-1762-223372
Section Q-3: Bessey Clamps. Section Q-3: Bessey Clamps. Bessey Clamps. Last Updated: 07/02/10
Section Q-3: Bessey Clamps Section Q-3: Last Updated: 07/02/10 Section Q-3: K Body Parallel Clamps Series Maverick Hardware Large parallel jaw surfaces made from non-marring polyamide Internal steel frame
THE SURFACE THAT S MADE ROUGH... TO MAKE OTHER SURFACES SMOOTH!
Facts On Files Facts On Files Including Helpful Tips And Proper Filing Techniques THE SURFACE THAT S MADE ROUGH... TO MAKE OTHER SURFACES SMOOTH! This booklet not only shows you how to get the most out
Product Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
The Convex or Half-Round surfaces of SR-1 and SR-2
Sole and Bar Rasp Directions 7-17-13 p.1 How to Use Evolutionary Hoof Care s New Contouring Bar & Sole Rasps TM The SR-1 Rasp Tooth (white handle) and SR-2 Knife Tooth (black handle) See video at: www.evohoofcare.com
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
Optimus. The New Generation of Saw Blades. 4X Cutting Power Catalog US
Optimus The New Generation of 4X Cutting Power Catalog US OUR COMPANY ISHAD manufactures high quality saw blades for exportation world-wide. Each product complies with the strictest quality control standards
Supplying the Aerospace, Defense & Metal Working Industries Since 1951!
Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA
Ernest Bennett Saws Price List
Ernest Bennett Saws Price List 2015 Contents Circular Saws Rip saws 3 Anti-kick rip saws 3 Spring set plate saws 4 General cross cut saws 4 Negative hook cross cut saws 5 Construction saws 5 Universal
WENDT USA, LLC Wendt USA, LLC Wendt USA, LLC
WENDT USA, LLC Over the next year, you will see a change to our new company logo. We will be rolling it out in our literature, packaging and our forms. You are getting the same high quality product you
Flat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
Product #: Product #:
STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws
grinding & polishing 39
grinding & polishing sales@trelawny.co.uk 39 grinding & polishing grinding & polishing - an introduction HOW THEY WORK Floor grinders use a horizontal rotating disc to perform a multitude of tasks, commonly
Chapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing
MET 33800 Manufacturing Processes Chapter 25 Other Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Other Machining Processes Shaping
POWER TOOL ACCESSORIES PROMOTION
POWER TOOL ACCESSORIES PROMOTION BUY $100 in Accessories Any Mix & GET a $2 DRIVEKORE Gift Card GET a $2 DRIVEKORE Gift Card Offer available on all in stock accessories and any special order accessories.
PRODUCT CATALOG SCRAPERS CHISELS SPECIALTY PUNCHES PNEUMATIC PRY BARS
PRODUCT CATALOG CHISELS ES PRY BARS SCRAPERS SPECIALTY PNEUMATIC Divided into two sections, this catalog lists the full breadth of MayhewPro (black-tabbed pages) and MayhewSelect (red-tabbed pages) products.
Metal Drilling
www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle
Drilling & Tapping Wide selection from a single source. Durable designs.
Drilling & Tapping Wide selection from a single source. Durable designs. Type No. of Models Nom. Size (in.) Page Hole Cutting Model HC300 3 Up to 3" 6.2 Model HC450 3 Up to 4 3 4" 6.3 Hole Saws 51 Up to
HICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
Professional Pliers. Quality to Depend on
Professional Pliers Quality to Depend on - 227 - High Leverage Pliers High Leverage Pliers High Leverage pliers boast a labor-saving design to generate greater productivity with less effort. Ergonomic
Power Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Masonry Diamond Cutting Diamond Cutting Blades Milwaukee Diamond Cutting Blades are designed to the highest standards only using quality diamonds.
Hand Tools and Power Tools
Lesson Outcomes The student will be able to: Identify a variety of hand tools and power tools and describe their purpose, application and how they are operated in a safe and proper manner. A wide variety
WESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
CARPENTRY & MEASURING TOOLS CATALOGUE
CARPENTRY & MEASURING TOOLS CATALOGUE 2 CARPENTRY TOOLS CARPENTRY TOOLS 3 SMC - 431 T - BAR CRAMPS Bar Manufactured From Special 'T' Bar Section Steel Head & Slide Made Of Cast Iron Suitable For Heavy
IWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
FABRICATION MANUAL CCM Copper Composite You discover why ALPOLIC Copper composite material (CCM) is the building material of the future as soon as
FABRICATION MANUAL CCM Copper Composite You discover why ALPOLIC Copper composite material (CCM) is the building material of the future as soon as you fabricate it. Our CCM is as easy to fabricate as wood:
Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
R8 COLLETS SERIES 333 : SUPERIOR IMPORT SERIES 330 : (Concentricity guaranteed to 0.000) Size 1/32** 1995502 1/16 1995104 7169005 3/32 1995106 7169010 1/8 1995108 7169012 5/32 1995110 7169015 3/16 1995112
Reamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
POWER TOOL ACCESSORY GUIDE
POWER TOOL ACCESSORY GUIDE TABLE OF CONTENTS METAL SAWZALL BLADES 3 WOOD SAWZALL BLADES & HACKZALL BLADES & BLADE KITS 4 SPECIALTY SAWZALL BLADES 5 HOLE SAWS & HOLE SAW KITS 6 SPECIALTY HOLE SAWS 7 THIN
IWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and
Metals can be bought from suppliers in standardized forms and sizes, such as round,
1.4 METAL CUTTING BAND SAWS: Metals can be bought from suppliers in standardized forms and sizes, such as round, rectangular or square bar stock or in the form of large sheets (plates). Bar stock normally
Special Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
MASONRY TOOLS 370-AF SURE. SURE GRIP-FIBERGLASS HANDLE Sure ridged handle grip provides for comfortable feel and shock resistance
MASONRY TOOLS WASHINGTON PATTERN BRICK HAMMERS Our brick hammers are made of high-grade forged hammer steel Specially heat treated to maintain a keen cutting edge Perfectly balanced and superior in every
Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
IFRC SHELTER TOOL KIT
IFRC SHELTER TOOL KIT PP ROPE ROPE, polypropylene, black, 12mm diam., twisted Diameter: 12mm +/- 0.5mm Length: 30m Weight: 1.9kg Number of strand: 3 minimum Type: twisted Material: polypropylene, no recycled
IC LEARNING SERIES. Marking Out, Measurement, Fitting & Assembly
IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly The Hong Kong Polytechnic University Industrial Centre IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly Suitable for the following
Ball-Joint Scrapers Steel Blade Carbide Blade 05K K21.04
Ball-Joint Scrapers Steel Blade Carbide Blade 05K21.01 05K21.04 The Veritas Ball-Joint Scraper is based on a tool originally made by L.S. Starrett Tool Company but out of production for many years. Originally
SURFACE CONDITIONING CUTTING ABRASIVES
SURFACE CONDITIONING CUTTING ABRASIVES 399 ABRASIVES SURFACE CONDITIONING POWERBLEND 503515 POWERBLEND SCD Flap Disc Surface Conditioning Super High Performance (for Angle Grinders) POWERBLEND SCD flap
High Leverage Combination Pliers
Wiha Pliers & Cutters, professional quality at competitive prices. A wide selection covering most applications in which pliers & cutters are required. 64HRC Cutting Edges Wiha SoftGrip Pliers & Cutters
Technical Training USG Saw Chain Grinder
Technical Training USG Saw Chain Grinder 1 USG HOS The STIHL USG Universal Sharpener will sharpen all types of saw chain. This is by far the most versatile and accurate machine of its type on the market.
Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
Tools Sec. 23 2FW. 2018
Tools Sec. 23. 2018 Kits Ratchet Type Standard Nutsert Tool Part # Included In Kit Sizes Tool Type Qty. 12938 Nosepiece and Mandrel included 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16 Thread Size Nosepieces
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC
Building Rudy Kouhoupt s Walking-Beam Engine
Building Rudy Kouhoupt s Walking-Beam Engine Some time ago I came across a copy of Rudy Kouhoupt s article: "Build this Walking-Beam Engine" (Popular Mechanics August 1969), and decided to try and make
INDUSTRIAL QUALITY SINCE CALL , or VISIT for more information.
ALL- CIRCULAR SAW BLADE LINE-UP for more information. WOODWORKER SERIES BLADES FOR THE PROFESSIONAL WOODWORKER Century s Woodworker Series blades are manufactured to the highest standards of precision
PFERD Australia - World Of Tools
PFERD Australia - World Of Tools VERTRAU BLAU Trust In The Blue Known globally for manufacturing quality abrasives. Your total abrasive solution. Tradition, Progress, Innovation A leading manufacturer
IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity
IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x
Mag_Catalog Final 11/3/10 11:16 AM Page 1
Mag_Catalog 2010-3Final 11/3/10 11:16 AM Page 1 Mag_Catalog 2010-3Final 11/3/10 11:16 AM Page 3 C O N T E N T S DRILLBITS AUGER BITS: Nailbomber Moly Coated / Ship Head Heavy Duty (357DLX, 303DLX)....................4
HEALTHCO HIGH PRECISION TWEEZERS Straight and Tapered Straight Angled and Curved ANTIMAGNETIC
HEALTHCO HIGH PRECISION TWEEZERS Straight and Tapered Straight Angled and Curved ANTIMAGNETIC 3c-H-101 HEALTHCO Precision Straight Tip Tweezer 9.0 mm -.355 in. l-h-109 HEALTHCO High Precision Straight
ABRASIVES. Buffalo Dental Manufacturing Company, Inc.
ABRASIVES Buffalo Dental Manufacturing Company, Inc. www.buffalodental.com 2 Abrasives, Blue Mounted Points Blue mounted points ideal for trimming and finishing dentures, temporaries and restorative materials.
Power Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Step Drill Bits Step Drill Bits Milwaukee Step Drill Bits with JAM-FREE Performance feature a dual-flute design delivering up to 2X faster hole times,
Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.