sectional view solid Knob design, heavy spring Latch recommended
|
|
|
- Gwendoline Waters
- 5 years ago
- Views:
Transcription
1 llart Select oor Knobs Two traitional erio oor Knobs - both available in three sizes - esigne to work in conjunction with the Rosettes & acklates to be foun in sections ST3 & ST4. omlementary Thumb Turns can be foun in section ST7, an abinet Knobs in section F1. 76 with 6000 late soli Knob esign, heavy sring Latch recommene with 78 rosette Sulie with 8mm x 110mm stainless steel lockoint sinle an M6 grubscrew (64mm max. oor thickness); alternative sinle lengths an functions are available - see ages ST6:070 & 080. Installation instructions sulie. with 8700 late Slit Finish Sets orer as singles 1) select KNO (e.g. 76) 2) a FINISH (e.g. 76) 3) a SIZE (e.g. 76/) For HLF SET (single knob) a /H (e.g. 76//H). For use with alwin 7.2mm sinles, iamon orientation, a WN to coe (e.g. 76//WN). acklates an Rosettes orere searately - see sections ST3 an ST4.76 soli Knob esign, heavy sring Latch recommene with 7823 rosette (iameter) Ø 51 Ø 56 Ø 63 (rojection) 48* 52* 59* * t otal rojection: a 7mm for rosette, 6mm for backlate with flush collar & 10mm for late with raise collar. ST2:005
2 llart Select oor Knobs Two classic oor Knobs - both available in four sizes - esigne to work in conjunction with the Rosettes & acklates to be foun in sections ST3 & ST4. omlementary Thumb Turns can be foun in section ST7, an abinet Knobs in section F1. with 5900 late 76 soli Knob esign, heavy sring Latch recommene with 7841 rosette Sulie with 8mm x 110mm stainless steel lockoint sinle an M6 grubscrew (64mm max. oor thickness); alternative sinle lengths an functions are available - see ages ST6:070 & 080. Installation instructions sulie. with 5900 late Slit Finish Sets orer as singles 1) select KNO (e.g. ) 2) a FINISH (e.g. ) 3) a SIZE (e.g. /) For HLF SET (single knob) a /H (e.g. //H). 76 For use with alwin 7.2mm sinles, iamon orientation, a WN to coe (e.g. //WN). acklates an Rosettes orere searately - see sections ST3 an ST4. soli Knob esign, heavy sring Latch recommene with 7827 rosette (iameter) Ø 48 Ø 54 Ø 64 (rojection) 44* 53* 59* 65* * t otal rojection: a 7mm for rosette, 6mm for backlate with flush collar & 10mm for late with raise collar. ST2:006
3 Rosettes - onceale fix llart Select Two traitional erio esigns of conceale fix Rosettes, both available in four sizes; an all esigne to work in conjunction with the oor Levers & oor Knobs to be foun in sections ST1 & ST (shown fitte) FIX E UMMY OTION 7 ( size = 9mm) SUROSES & LIGNMENT OLLRS SULIE (ia) Ø 44 Ø 54 Ø 64 Ø 76 ustom sizes available uon request - surcharge may aly RE-ORE TOR VILLE Sulie with subroses, no.4 x 13mm woo screws, alignment collars an installation instructions. Fix ea Rosettes are sulie with 7813 mounts in lace of stanar subroses (*). air of re-ore Rosettes (sizes & only) sulie with 7800 re-ore ater in lace of stanar subroses (*). (*) See ages ST6:070 & 080 for etails. Slit Finish Sets - orer as singles 1) select ROSETTE (e.g. 78) 2) a FINISH (e.g. 78) 3) a SIZE (78/). For HLF SET (single rosette) a/h (e.g. 78//H). For air of rosettes FIX E a FS (e.g. 78//FS). For single rosette FIX E a F (e.g.78//h/f). For RE-ORE TOR (sizes & only) a RE (e.g. 78//RE). ST3:050
4 Entrance/Exterior oor Furniture entre oor Knobs Four classic esigns of entre oor Knob, all N machine from blocks of soli brass to rouce erfect etailing an roortion (ia) (rojection) (ia) (rojection) Sulie with anti-rotation in, finish matche ome nut an washer & M12 x 75 allthrea to suit oors u to 57mm thick (longer allthreas available uon request). Finish matche ome nut airs of Knobs are sulie with a back-to-back fixing system. 1) select KNO (e.g. 2599) 2) a FINISH (e.g. 2599U) ) a SIZE (e.g. 2599U/) 4) To orer a air of Knobs with K-TO-K fixings a T (e.g. 2599U//T). N. Lacquere finishes (e.g. & S etc.) are not recommene for exterior use. (ia) (rojection) (ia) (rojection) F5:005
5 abinet Furniture abinet Knobs Two classic abinet Knobs, available in four sizes with or without Rosette, esigne to comlement both llart Select an Traitional oor Knobs (see sections ST2 an F2). Each knob & rosette is recision N machine for accuracy an consistent fine etailing (ia) Ø (roj) (roj) Sulie with M4 x 50mm break-off flange hea machine screws. owel Screw otion available 1) select KNO (e.g. 0642) 2) a FINISH (e.g. 0642) ) a SIZE (e.g. 0642/). hoose OWEL SREW otion if require (e.g. 0642//S). (ia) Ø (roj) (roj) F1:005
6 abinet Furniture abinet Knobs Two traitional abinet Knobs, available in four sizes with or without Rosette, esigne to comlement both llart Select an Traitional oor Knobs (see sections ST2 an F2). Each knob & rosette is recision N machine for accuracy an consistent fine etailing (ia) Ø (roj) (roj) Sulie with M4 x 50mm break-off flange hea machine screws. owel Screw otion available 1) select KNO (e.g. 0644) 2) a FINISH (e.g. 0644) ) a SIZE (e.g. 0644/). hoose OWEL SREW otion if require (e.g. 0644//S). (ia) Ø (roj) 30 (roj) 26 F1:006
Appliance Pulls. Cabinet Furniture CF2:010
A selection of Pulls available in a variety of sizes to complement both traditional and modern interiors. They can also be found in the oor Furniture section (see F3) where most are available fitted to
Door Knob Sets. Door Furniture DF2:010. Fixings
oor Knob Sets Four classic non-sprung oor Knob designs available in a variety of sizes, functions, and configurations. 1022 3048 uncontrolled, hinged, solid residential doors and are supplied with finish
Door Knob Sets. Door Furniture DF2:010. Fixings. How to Order. Finishes - See our price list or website for finish availability.
oor Knob Sets Four classic non-sprung oor Knob designs available in a variety of sizes, functions, and configurations. 1022 3048 uncontrolled, hinged, solid residential doors and are supplied with finish
Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications
3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Specifications 2016 02 2 FSB North America Heavy Duty Lever Latch HLL Series Quality
1.3. Face Drivers. for Grinding. FFBR with Flange Retainer. FBSR with Taper Shank Retainer FFB/ FFBH. Changeable Parts
1.3 Face Drivers for Grining FFBR with Flange Retainer FBSR with Taper Shank Retainer FFB/ FFBH Changeable Parts Special Face Drivers FBSR PN / FFPR / FBS NEIDLEIN-SPNNZEUGE GmbH. Erlenbrunnenstraße 3.
A STANDARD THERMOWELL. length from 50mm to 1505mm PN 6, 25, 40
STANAR THERMOWE length from 50mm to 1505mm PN 6, 25, 40 ESCRIPTION: materials: steel, brass, copper, stainless steel an other metals, other surface finish available attachment threa -inner, outer process
Grooving & Sizing. Chamfering. Tooling for CNC machines, includes solutions for both basic and advanced applications.
Tooling for machines, inclues solutions for both basic an avance applications. All tools are prouce from high quality steel. High quality carbie, aaptable graes to suit cutting requirements. namictm soli
AFTER SELECTING THE PRODUCT YOU REQUIRE, PLEASE ADD THE FOLLOWING: 4. CAM DETAILS... SEE AND PRODUCT DATA SHEET FOR DETAILS
Furniture Locks Specifying a product when ordering AFTER SELECTING THE PRODUCT YOU REQUIRE, PLEASE ADD THE FOLLOWING: 1. REMOVABLE BARREL SYSTEM.. PAGES 4.10-4.49 2. FIXED BARREL PRODUCTS... PAGES 4.50-4.99
2900 Series Mortice Lock Furniture
Mortice Lock Furniture Harm Minimisation and Vandal Resistant Door Furniture Mortice Lock Furniture Kaba Australia has been designing & developing Door furniture in Australia for over 30 years. In using
ED1100 /1100F SERIES RIM EXIT DEVICE INSTALLATION INSTRUCTIONS
E1100 /1100F SERIES RIM EIT EVIE INSTALLATION INSTRUTIONS Ver.2 1100 SERIES RIM EIT EVIE End ap End ap Bracket End ap End ap Bracket over Plate Mechanism ase enter ase SPEIAL TOOLS REQUIRE Push Bar Hex
MORTISE LOCKS RESIDENTIAL SERIES
MORTISE WITH TRIM MORTISE WITH sectional TRIM AVAILABLE FINISHES C15 SATIN NICKEL C26 POLISHED CHROME C26D SATIN CHROME FEATURES cul listed for use on 3-hour Fire Door (Single or Double Doors) Conforms
CATALOGUE ROUTER BITS P 01
CATALOGUE P 01 1 Summary ECO-LINE NEW-Mini =1+1 router bit P HW - HWM P ECO-LINE p. 3 WHOLE TIPS p. 6 STRAIGHT CUTTING EGE TOOLS p. 21 HELICAL TOOLS p. 22 CHUCKS p. 31 ACCESSORIES p. 39 HP-LINE p. 8 HELICAL
BF12-SERIES Flash Stands
BF12-SERIES Flash Stands Document # 16-462 Assembly and Operating Instructions Please review all these instructions prior to assembly. The BF12-SERIES stands come in two models, standard duty and heavy
K/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
BB1068 / BB1099 SERIES
068 / 099 SRIS LL RING TMPLT UTT HINGS HVY WIGHT Non-handed ase material: steel for series 068, stainless steel for series 099 High grade plated finishes Standard non-rising non-removable pin (NRP) Standard
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
MORTISE LOCKS SPECIFICATIONS RESIDENTIAL SERIES
AVAILABLE FINISHES 15 SATIN NICKEL MORTISE WITH ESCUTCHEON TRIM MORTISE WITH SECTIONAL TRIM 19 MATTE BLACK 26 POLISHED CHROME 26D SATIN CHROME FEATURES UL LISTED FOR USE ON 3-HOUR FIRE DOOR (SINGLE OR
Weslock-Molten Bronze Collection Entry Handle Features
Weslock-Molten Bronze Collection Entry Handle Features Meets ANSI A 156.2 Grade II lock standards Removable knobs/levers prevents scratching during installation Solid Molten Bronze 1 throw deadbolt with
Tubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification
4 Tubular Deadbolts 3 4 6 8 17 Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 3 12 14 16 17 Keyed Deadbolt Series KDD Features Ordering String KDD Functions
Door Thickness For Cylindrical Door Locks with PB-CW PB-CW S-CW BZ-CW 612
Door Reinforcers Application Part No. Finish Overall Size Back Set Door Thickness For Cylindrical Door Locks with 2 1 8 2-PB-CW 605 hole, 9 height. 9 2 3 8 1 3 2-S-CW 630 3-BZ-CW 612 3-PB-CW 605 1 9 2
DOOR REINFORCERS. For Cylindrical Door Locks with 2 1 / 8" hole, 9" height. 3-PB-CW /4" 9" 2 3 /4" 1 3 /8" S-CW
Published list prices, please login or contact a sales representative for your pricing. DON-JO Price Book, September 1, 2012 DOOR REINFORCERS Application Part No. Finish Overall Size Back Set Door Thickness
General Hinge Information
, ontinuous Hinges and Pivots A2 Latches, atches & olts xterior Hardware A2 eneral Hinge Information SLTION O TH PROPR WIHT AN ARIN TYP Standard Weight... Plain earing Standard Weight... all earing, oncealed
DME Final Project Brief Project Summary
Matthew radley Omar Ghani ME Final Project 0070 rief Project Summary Objective To design a retracting mechanism for a communication board that is to be attached to a mobile wheelchair, with the following
J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi
![J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi](/thumbs/85/92217343.jpg "J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi")
INdex ZERTIFIZIERT 4 INTERIOR DOOR SIMONSWERK TECTUS TE 210 3D for unrebated and rebated, flush-faced quality doors Hinge up to 40 kg Technical Data Load capacity Length (leaf/frame) Width (leaf/frame)
Securafix. Keeler Hardware. Securafix. Lockwood Catalogue. telephone
Lockwood Catalogue ASSA ABLOY, the global leader in door opening solutions 2 Contents General information 1 3670 Series 3 1800 Series Square End Mortice Latch Furniture with 4 2800 Series Round End Mortice
Concealed Shallow tab 17.3 (.68) 11 (.44) 86 (3.38) 44 (1.72) 8 (5/16) Hex wrench opening (.252) 2 PL. Receptacle panel. Latch. panel Ø13 (.
22 R2 Draw Concealed Shallow tab High tensile Suited for thin panels Ø 5 (.196) (.).3 (.6).5 Average ultimate tensile : *13.5.5 Average ultimate shear : 900 N (2000 lbf) Install assembly with M5 (No. 10)
NEW! D Series. Matte Black D C 8.5 D L C3 C2 C1 D D Fasteners Included M4 x 25.
2018 Addendum 2018 NEW! D200000 Series Matte Black D205192-94 28.5 C 8.5 D204128-80 C3 C2 C1 20 11 D205320-94 15 15 D29515-80 25 Fasteners Included M4 x 25 3 NEW! D200000 Series Matte Black D206192-80
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
PROFESSIONAL FLARING TOOL 001ERL 37 & ERL 37
PROFESSIONAL FLARING TOOL 001ERL 37 & 45 002ERL 37 001ERL shown here OWNER S MANUAL 199R11215 EDUCATIONAL TIPS Make sure the end of the tube is cut off square. Before flaring, make sure the die clamp is
Traditional Range Bean Thumblatches
Bean Thumblatches 33101 (Medium Bean Thumblatch) Medium Bean Thumblatch Handle Length: 210mm Thumb Bar Length: 140mm The thumb piece passes through the door and raises the latch bar off the keep. To restrict
98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device
911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device
P R O D U C T CATA L O G J U N E 2 0 1 0 800.575.2658 www.weslock.com Molten Bronze Elegance Traditionale Essentials Reliant Interconnect U.L. 60 Minutes Rated 2-3 4-5 6-7 8-9 10 11 12-13 WWW.WESLOCK.COM
INTRODUCING GRUPPO ROMI LTD.
www.grupporomi.com INTRODUCING GRUPPO ROMI LTD. We are a leading manufacturer and exporter of distinct hardware for the home located in Argentina. Our designs include a vast array of architectural, decorative,
TRILENNIUM FULL SCOPE (FS) TEMPLATE INSTRUCTIONS
Overview Parts Included in Template System: Full Scope (FS) Template Rails, with ø 2-1/8 Crossbore Guides. FS Router Carrier (for 1-3/4, 2 & 2-1/4 Doors) FS Bridges, Stops and Twist Bolts 13/16 x 5 Router
Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
![M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information](/thumbs/77/74547895.jpg "M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information")
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
Installation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
OVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin
DEVICES COVERED IN THIS DOCUMENT: 46CE Cylinder Escutcheon Key locks and 46DT Dummy Trim Pull when dogged unlocks lever 46BE Blank Escutcheon Always operable 46NL Night Latch Key retracts latchbolt 46NK
Temperature Sensor Tri-Clamp
SENSORS FOR AN BIOPHARMA. Prouct Information TFP-47, -57, -67, -167 Temperature Sensor Tri-Clamp Application/Specifie usage Temperature Measurement in vessels an pipes Authorizations Application examples
MAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION
ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
Auxiliary Hardware Brass Padlocks
Brass Padlocks Gainsborough offer a selection of quality 45mm and 50mm brass padlocks, featuring brass and steel materials and 6 pin cylinder security. The range includes hardened steel or brass shackles
Matte Black NEW! D Series. Ask about other finishes! D D D D Fasteners Included M4 x 25
2018 Addendum 2018 NEW! D200000 Series Matte Black D205192-94 28.5 C 8.5 D204128-80 C3 C2 C1 20 11 D205320-94 15 15 D29515-80 25 Ask about other finishes! Fasteners Included M4 x 25 3 NEW! D200000 Series
TOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
Lever Handles Technical Help Sheet. 7 Imperial Way, Croydon, Surrey CR0 4RR +44 (0) josephgiles.
Lever Handles Technical Help Sheet Typical door construction It is important to understand the basics of door construction, especially when selecting architectural hardware. Below is an image outlining
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675
No. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes.
SINCE 1964 No. 059FL No. 251FL No. 260FL No. 305RE 2 Etruscan Bronze (ETR) Florentine Brass (D) Siena Brass (BAS) Venetian Nickel (BPS) All designs available in these finishes. No. 309RE No. 331FL No.
Security Mortise Locks
Security Mortise Locks h 1 TABLE OF CONTENTS Specifications/Standards of Excellence................................ 2 Door Conditions.................................................... 3 Ordering Instructions
vertica assembly instructions home theater Component List
8558 home theater bdiusa.com customerservice@bdiusa.com omponent List A - Phillips Screwdriver B1 - ex Wrench Vertica is engineered for easy assembly. arefully follow this procedure to prevent any damage.
Rim-Lock Door Set Installation Instructions
Rim-Lock Door Set Installation Instructions Let s get started Check Your Parts List Two Doorknobs with Set Screws B. Doorknob Spindle C. Rim Lock with Mounting Screws D. Keeper with Mounting Screws E.
Concealed Tab Mount 17.3 (.68) 11 (.44) 86 (3.38) 44 (1.72) 8 (5/16) Hex wrench opening. Receptacle panel. Latch. panel Ø 13 (.50) 44 (1.72) 19 (.
306 R2 Draw Concealed Tab Mount High tensile Suited for thin panels Average ultimate tensile : *13 Ø5 (.196).5 (.).3 (.6).5.5 Average ultimate shear : 900 N (2000 lbf) Install assembly with M5 (No. 10)
Mortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
Bollard Chain Eye 3/8" (Powder Coated) Quick Link Connector 5/16" (Powder Coated) Optional Accessories:
ollard R-98 General escription: 0 / R-98 Solar Light ollards increase safety and visibility for High-capacity batteries allow lights to operate for days hoose from a range of custom lighting colors, distribution
Congratulations! You are now on your way to enriching your life with!
C) Using the base point as your reference, measure up 8-1/32 and mark a horizontal line. Measure in from the edge of the door the distance of your backset and mark where the two lines cross. This will
M O R T I S E L O C K S
MORTISE LOCKS lock design M certification / compliance Locks comply with UL 10B, Fire Tests of Door Assemblies, and UL 10C, Positive Pressure Fire Tests of Door. Door Assemblies and the Uni form Building
TECTUS. The completely concealed hinge system
The completely concealed hinge system index te 210 3d up to 40 kg 4 te 310 3d up to 60 kg 5 te 510 3d up to 100 kg 6 TE 525 3D up to 100 kg 7 te 630 3d up to 200 kg 8 Cable set TECTUS Accessories 9 Fixing
Weatherfold 4s 50 & Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium
- Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium This Guide to Quantities is only applicable to Data Sheets E1 and E130. Specification for Individual Panels Track
Stainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1
Izerwaren Order number 51.004 Stainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1 Flush Door Lever Handle, for use with entry set with Profile Cylinder 304 Stainless Steel 100
BICO INC. GRINDING PLATES
BICO INC. GRINDING PLATES IRON PLATES UA-51 Standard Iron Alloy Plate - Stationary 11/5 UA-52 Standard Iron Alloy Plate - Revolving 11/5 UA-94 Wear Resistant Iron Alloy - Stationary 11/5 UA-95 Wear Resistant
ROCKFORD PROCESS CONTROL, INC.
esigners and Manufacturers of Institutional asework Hardware ROKFOR PROESS ONTROL, IN. 2020 Seventh Street Rockford, IL 61104 Phone: 815-966-2000 Fax: 815-966-2026 sales@rockfordprocess.com www.rockfordprocess.com
BJ WALLER ARCHITECTURAL IRONMONGERS. B J Waller Limited DOOR HARDWARE
B J Waller Limited DOOR HARDWARE Levers on Roses Peterhouse Designer Levers on Roses 45.10103 Peterhouse Designer Lever on 50x8mm Rose CP 45.10113 Peterhouse Designer Lever on 50x8mm Rose SC Trinity Designer
Door Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
4-8 HSF 250 Patriot. Line Stop Fitting Installation Instructions. Installation Instructions and Best Practices continued on back
HSF 250 Patriot Heavy Duty Line Stop Fitting - 4, 6, 8 inch Nominal Sizes Line Stop Fitting Installation Instructions Push and Pin Completion Plug Installation Instructions IMPORTANT: Read installation
CT40 SD-16 80mm. BT40 SD-16 90mm. HM 32mm 4 CAT40. HM 32mm 105 BT40
S Collet & HM Milling Chuck Contents BT...S S Collet High Accuracy Chucks 52 CT...S HSK...S HM HM Milling Chucks 53 Section Contents 50 S Collet Chuck Measurement System Interface Collet Type Gage ength
LOCKSMITHING AND DOOR HARDWARE
LOCKSMITHING AND DOOR HARDWARE Gestión de Compras have the means to produce locksmithing parts and a wide variety of products of hardware for doors, windows or furniture with the desired quality, material...
WNA Series. Knobsets AVAILABLE STYLES AVAILABLE FINISHES. Finish A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA Code
WNA Series Knobsets AVAILABLE STYLES Beverly Huntington Phoenix Troy AVAILABLE FINISHES Are in Brilliance finish in certain funtions Finish 3 5 15 17A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
SECURITY. Window Security Products.
SECURITY Lock Cases and Accessories Window Security Products Latches and Bolts Surface Mount Bolts PRODUCT GUARANTEE INFORMATION Delf Architectural provides a 5 year limited mechanical guarantee on all
where ideas unfold brio.com.au Brio 6000 Mortice Lock Series Locking solutions for sliding & folding doors
where ideas unfold brio.com.au Brio 6000 Mortice Lock Series Locking solutions for sliding & folding doors About us Brio, based in Australia, is focused on bringing adventurous architectural ideas to life,
BRITISH STANDARD MORTICE LOCKS
BRITISH STANDARD MORTICE LOCKS FOREND EASILY REVERSIBLE LATCH (NO NEED TO REMOVE TOP PLATE) SPRING SLOTS TO ACCOMMODATE BOLT THROUGH FURNITURE ERA British Standard Mortice Locks are manufactured to conform
DOOR TECHNOLOGY ORDER CATALOG SECTION SECURY Automatic Door Lock & Gripset Handle
DOOR TECHNOLOGY ORDER CATALOG SECTION 03.3 SECURY Automatic Door Lock & Gripset Handle Table of Contents 03.3 SECURY Automatic Door Lock & Gripset Handle SECURY Automatic Door Lock...03.3.5 Automatic
INSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
Rim & Mortise Cylinders
Rim & Mortise Cylinders 53 Rim & Mortise Cylinders FEATURES Medeco 3 BiLevel Medeco X4 CLIQ Medeco XT Utility patented key control provides protection from unauthorized duplication of keys UL437 Listing
Rim & Mortise Cylinders
Rim & Mortise Cylinders 59 Rim & Mortise Cylinders FEATURES Medeco 3 BiLevel Medeco X4 CLIQ Medeco XT Utility patented key control provides protection from unauthorized duplication of keys UL437 Listing
Parts and tools needed for installation- Cleaning and Painting -
Thank you for the purchase of our JK Rear Trail Doors. We have made these from 6061-T6 aluminum and reinforced them with stiffeners at the top that double as a comfortable armrest and support for Rugged
Installation Instructions
for s TOC Table of Contents 1 Mortise Lock Handing Instructions.... 2 2 3 4 5 Mortise Lock Door Preparation & Installation... 3 HSS Trim Installation.... 5 Knob x Knob...6 Lever x Knob....7 Turn-Piece
Push and Pull Door Furniture. Plate Door Furniture Door Furniture and General Hardware
Plate Door Furniture Push and Pull Door Furniture Door Furniture and General Hardware 3.109 184 Offset Pull Made from brass and designed to compliment 1800 and 2800 Series Brass Plate Furniture, the 184
Bravura. UL Listed Commercial Locksets FORGED. Designs from Great European Homes. Fall 2009
Designs from Great European Homes FORGED UL Listed Commercial Locksets Fall 2009 Many hotel, condo, apartment and office projects require locks with a UL fire rating. offers both tubular and mortise locks
Router Bits. Router Bits. WoodPecker. Router Bits. Router Bits. Straight Bits 1/4 Shank, 2 Flutes. Rail & Stile - Raised Panel Door Set, 3 Pcs
Rail & Stile - Raised Panel oor Set, 3 Pcs Premium industrial quality, suitable for working in natural woods and man made materials (MF). Unique cutting angles and chip limiter body ensures safe, clean
SUMMIT HUTCH ASSEMBLY HARDWARE WALL MOUNTING HARDWARE TOOLS REQUIRED COMPONENTS. 4 - large. 4 - bolts 4 - flat 4 - spring small screws.
SSEMBLY HRDWRE Missing hardware? Please call 800.606.6387 for replacements. 20 - small 4 - large 4 - bolts 4 - flat 4 - spring washers washers 8 - shelf pins 4 - cam 4 - cams 2 - connecting brackets WLL
OPERATOR ADAPTER APCABVA
OPERATOR ADAPTER APCABVA Installation Instructions for Allen-Bradley Bulletin 1494V (Variable Depth) 1494C, 140G and 140U Cable Controlled For floor-mounted enclosures with disconnect on the right flange
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
Lockset Program. North American Manual
Lockset Program North American Manual North American Manual About FSB Designer Series Lockset Program Lever, Knob and Trim Designs Sliding Door Hardware Door Pulls and Glass Door Hardware Accessories Window
AC 2-wire E2F-X2Y1 2M *1 E2F-X2Y2 2M *1. DC 3-wire, NPN E2F-X2E1 2M *1 E2F-X2E2 2M *1. AC 2-wire E2F-X5Y1 2M E2F-X5Y2 2M
Resin-case Sensor CSM DS_E_3_ Sensor with Resin Case with Superb Water Resistance IP68 protection. Moels with ifferent frequencies also available. Be sure to rea Safety Precautions on page. Orering Information
Architectural Solutions
Architectural Solutions Kaba - since 1862 Kaba since 1862 The Kaba Group runs operations in more than 60 countries and employs a workforce of around 10,000. As the technological forerunner Kaba develops
SAN DIEGO - Corner TV Unit
SN EGO - orner TV Unit ssembly nstructions - lease keep for future reference 385/8651 imensions Width - 100cm epth - 40cm eight - 50cm mportant lease read these instructions fully before starting assembly
Door Hardware Installation Instructions. Version A No Interior on an Un-prepped Door Step 1 Select the Position of the Handleset
For Assistance Call: 1-800-522-7336 8 am - 5 pm, Monday - Friday, MST or visit our Website at: www.grandeur-nw.com Door Hardware Installation Instructions Dummy Handleset Optional Rosette (Round) Interior
Trim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
SOLID BRASS - DEADBOLTS
SOLID BRASS - Standard with Brass Deadbolt Locks Solid Brass Cylinder, Housing, Collar and Rosette Regular Style 8450 8350 Polished Brass (US3) $40.00 $42.00 Low Profile Style Includes Extension Collar
MEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
STAINLESS STEEL CONTINUOUS HINGES
STAINLESS STEEL ONTINUO HINGES ID stainless steel hinges are full height piano hinges that provide support for the full height of the door. For doors up to 600 lbs. 0 maximum door width Hinge leafs are
SECURITY. Lock Cases and Accessories Latches and Bolts Surface Mount Bolts Window Security Products.
SECURITY Lock Cases and Accessories Latches and Bolts Surface Mount Bolts Window Security Products www.delfarchitectural.com.au Product Guarantee Information Delf Architectural provides a 5 year limited
HENDERSON. Securefold Bottom Rolling. Fitting Instructions For Bottom Rolling External Doors with Morticed hinges SYSTEM CAPACITY.
1 HERSON Securefold Bottom Rolling HEADBOARD LINTEL 9X4 Diagram 1 2,7 25 19 Fitting Instructions For Bottom Rolling External Doors with Morticed hinges 94SC SUPPORT CHANNEL 94P CHANNEL 14 2 SYSTEM CAPACITY
Designers & Manufacturers of Architectural Hardware. Traditionally Cast. RusticBronze. Made in England
F R A N K A A R T esigners & Manufacturers of Architectural Hardware RusticBronze Traditionally Cast Made in England Evoking the Traditions of Yesteryear... Welcome to Frank Allart s traditionally cast
Artefact Series II Door Furniture. Keeler Hardware. telephone
Artefact Series II Door Furniture AA ABLOY, the global leader in door opening solutions Contents Lockwood Door Furniture Handing Convention 2 Square Corner Plates 3 10mm Radius Corner Plates 5 Round End
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
1 CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE
CNC INDEX CNC CNC. Small Adjustable Chamfer Cutter: Designed for smaller CNC machines working in smaller sizes in all types of wood.
INEX For ecaes, imar has been at the forefront of growing inustry emans for top-quality cutting tools for woo, man-mae boar, plastics an avance materials. Fully automate precision machinery, eicate quality
98/ Customer Service # Dogging Key (use to lock down pushbar)
911373-00 Rim Exit Device 98/99 Installation Instructions Dogging Key (use to lock down pushbar) Customer Service 1-877-671-7011 www.allegion.com/us Allegion 2014 Printed in U.S.A. 911373-00 Rev. 05/14-f