Bollard Chain Eye 3/8" (Powder Coated) Quick Link Connector 5/16" (Powder Coated) Optional Accessories:
|
|
- Evelyn McLaughlin
- 5 years ago
- Views:
Transcription
1 ollard R-98 General escription: 0 / R-98 Solar Light ollards increase safety and visibility for High-capacity batteries allow lights to operate for days hoose from a range of custom lighting colors, distribution in of colors. Height: " ase iameter: " Weight: lbs ( ollard Only ) Material: Steel ase with luminum ap /" x 0" (iameter x Height) /bollard/colors-bollards 9 / Fixed - nchor asting in New oncrete (see sheet of ) Fixed - oncrete Insert nchor in Existing oncrete (see sheet of ) Fixed - dhesive nchor in Existing oncrete (see sheet of ) Post over - New Post in New oncrete (see sheet of ) Post over - Existing Post with dhesive nchor (see sheet of ) Light olor Options: 00K Neutral White 000K Warm White im to hours hours im to hours Installation Sample with /" hain ccessories hours ollard hain Eye /8" (Powder oated) Quick Link onnector /" (Powder oated) ollard hain /" (Powder oated) Optional ccessories: hain Eye Quick link hain (/") Padlock, rass ( /") Padlock, Stainless Steel (") See Reliance Foundry's optional accessories at: /bollard/accessories-bollards Unit 0, 0-8 Street, Surrey, VS G, anada info@reliance-foundry.com ollard R-98 OPYRIGHT RESERVE THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. NOT TO SLE WG NO R98 SHEET OF
2 ollard R-98 General escription: 0 / ) Secure bollard cap R-98 Solar Light ollards increase safety and visibility for High-capacity batteries allow lights to operate for days hoose from a range of custom lighting colors, distribution in of colors. ) Secure bollard base with " washer and " nut. Height: " ase iameter: " Weight: lbs ( ollard Only ) Material: Steel ase with luminum ap /" x 0" (iameter x Height) /bollard/colors-bollards Max. ar Height Fixed - nchor asting in New oncrete (see sheet of ) Fixed - oncrete Insert nchor in Existing oncrete (see sheet of ) Fixed - dhesive nchor in Existing oncrete (see sheet of ) Post over - New Post in New oncrete (see sheet of ) Post over - Existing Post with dhesive nchor (see sheet of ) New oncrete Light olor Options: 00K Neutral White " Min. epth Recommended / 0" Min. ia. Recommended ) Ensure top of anchor casting is level and flush with finished concrete grade. ) Wait until concrete is cured. ) Tighten threaded bar until it reaches approx. /" into the anchor casting. 000K Warm White im to hours hours im to hours hours ) ollard post is provided as shown. oncrete, foundation and/or installation ordered separately or provided by others. ) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements. ) imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension ) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement. ) Measuring tape ) /" wrench ) Special hex key PRTS LIST PRT NUMER ESRIPTION MTERIL R98 R98 ollard ase Steel Powder oated R98 R98 ollard Solar Light ap ( Option of SYM or SYM ) ast luminum Powder oated R00N " R00 nchor asting " uctile Iron Hot ip Galvanized R00R " R00 Threaded ar " x " Washer " O " Washer " O " Thick /8" Hex Nut " Hex Nut " - requires /" wrench utton Head olt TR /" x /" Hexagon Socket utton Head ap olt Tamper Resistant /" x /" - requires special hex key Stainless Steel OPYRIGHT RESERVE THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. lbs 9 lbs 8 /8 lbs / lbs /8 lbs / lbs Unit 0, 0-8 Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard R-98 WG NO R98 SHEET OF
3 ollard R-98 ) Secure bollard cap General escription: R-98 Solar Light ollards increase safety and visibility for High-capacity batteries allow lights to operate for days hoose from a range of custom lighting colors, distribution in of colors. 0 / ) Secure bollard base with /" washer and /" nut. Height: " ase iameter: " Weight: lbs ( ollard Only ) Material: Steel ase with luminum ap /" x 0" (iameter x Height) /bollard/colors-bollards Max. ar Height Fixed - nchor asting in New oncrete (see sheet of ) Fixed - oncrete Insert nchor in Existing oncrete (see sheet of ) Fixed - dhesive nchor in Existing oncrete (see sheet of ) Post over - New Post in New oncrete (see sheet of ) Post over - Existing Post with dhesive nchor (see sheet of ) /8 Existing oncrete ) Use hammer drill to make hole " dia. x /8" depth. ) lean drill hole of debris. ) Insert drop-in anchor into hole ) Use hammer and setting tool to drive plug down. ) Tighten threaded bar until it reached approx. /" into the drop-in anchor. Light olor Options: 00K Neutral White 000K Warm White im to hours hours im to hours hours ) ollard post is provided as shown. oncrete, foundation and/or installation ordered separately or provided by others. ) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements. ) imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension ) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement. ) Measuring tape ) /8" wrench ) Special hex key ) Hammer drill ) " Masonry drill bit ) Hammer ) rop-in concrete insert setting tool PRTS LIST PRT NUMER ESRIPTION MTERIL R98 R98 ollard ase Steel Powder oated R98 R98 ollard Solar Light ap ( Option of SYM or SYM ) ast luminum Powder oated rop-in oncrete Insert /" rop-in oncrete Insert /" - requires " x /8" hole (dia. x depth) R00R /" R00 Threaded ar /" x " Washer /" O " Washer /" O " Thick /8" Hex Nut /" Hex Nut /" - requires /8" wrench utton Head olt TR /" x /" Hexagon Socket utton Head ap olt Tamper Resistant /" x /" - requires special hex key Stainless Steel OPYRIGHT RESERVE THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. lbs 9 lbs / lbs / lbs /8 lbs /8 lbs Unit 0, 0-8 Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard R-98 WG NO R98 SHEET OF
4 ollard R-98 General escription: 8) Secure bollard cap R-98 Solar Light ollards increase safety and visibility for High-capacity batteries allow lights to operate for days hoose from a range of custom lighting colors, distribution in of colors. 0 / ) Secure bollard base with " washer and " nut. Height: " ase iameter: " Weight: lbs ( ollard Only ) Material: Steel ase with luminum ap /" x 0" (iameter x Height) /bollard/colors-bollards Max. ar Height Fixed - nchor asting in New oncrete (see sheet of ) Fixed - oncrete Insert nchor in Existing oncrete (see sheet of ) Fixed - dhesive nchor in Existing oncrete (see sheet of ) Post over - New Post in New oncrete (see sheet of ) Post over - Existing Post with dhesive nchor (see sheet of ) Existing oncrete Light olor Options: 00K Neutral White /8 ) Use hammer drill to make hole /8" dia. x " depth. ) lean drill hole of debris. ) aulk adhesive into hole from bottom up and fill / full. ) Push threaded bar into adhesive and turn to ensure bonding. ) Ensure bar is perpendicular and extend no more than " above grade. ) Wait at least minutes for adhesive to set. 000K Warm White im to hours hours im to hours hours ) ollard post is provided as shown. oncrete, foundation and/or installation ordered separately or provided by others. ) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements. ) imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension ) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement. ) Measuring tape ) /" wrench ) Special hex key ) Hammer drill ) /8" Masonry drill bit ) aulking gun and utility knife PRTS LIST PRT NUMER ESRIPTION MTERIL R98 R98 ollard ase Steel Powder oated R98 R98 ollard Solar Light ap ( Option of SYM or SYM ) ast luminum Powder oated dhesive nchor 00+ Gold dhesive nchoring System Vinylester dhesive Mortar R00R " R00 Threaded ar " x " Washer " O " Washer " O " Thick /8" Hex Nut " Hex Nut " - requires /" wrench utton Head olt TR /" x /" Hexagon Socket utton Head ap olt Tamper Resistant /" x /" - requires special hex key Stainless Steel OPYRIGHT RESERVE THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. lbs 9 lbs /8 lbs lbs /8 lbs / lbs Unit 0, 0-8 Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard R-98 WG NO R98 SHEET OF
5 ollard R-98 General escription: ) Secure bollard cap R-98 Solar Light ollards increase safety and visibility for High-capacity batteries allow lights to operate for days hoose from a range of custom lighting colors, distribution in of colors. 0 / ) Secure bollard base with " washer and " nut. Height: " ase iameter: " Weight: lbs ( ollard Only ) Material: Steel ase with luminum ap /" x 0" (iameter x Height) /bollard/colors-bollards Max. ar Height Max. interior post /" x 0" ( dia. x height) Filled with concrete Fixed - nchor asting in New oncrete (see sheet of ) Fixed - oncrete Insert nchor in Existing oncrete (see sheet of ) Fixed - dhesive nchor in Existing oncrete (see sheet of ) Post over - New Post in New oncrete (see sheet of ) Post over - Existing Post with dhesive nchor (see sheet of ) New oncrete ) Use piece of " nut on bar as anchor in wet concrete. ) Ensure the bar is centered and extend no more than " above grade. ) Wait until concrete is cured. Light olor Options: 00K Neutral White 000K Warm White im to hours hours im to hours hours ) ollard post is provided as shown. oncrete, foundation and/or installation ordered separately or provided by others. ) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements. ) imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension ) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement. ) Measuring tape ) /" wrench ) Special hex key PRTS LIST PRT NUMER ESRIPTION MTERIL R98 R98 ollard ase Steel Powder oated R98 R98 ollard Solar Light ap ( Option of SYM or SYM ) ast luminum Powder oated R00R " R00 Threaded ar " x " Washer " O " Washer " O " Thick /8" Hex Nut " Hex Nut " - requires /" wrench utton Head olt TR /" x /" Hexagon Socket utton Head ap olt Tamper Resistant /" x /" - requires special hex key Stainless Steel OPYRIGHT RESERVE THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. lbs 9 lbs / lbs /8 lbs / lbs Unit 0, 0-8 Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard R-98 WG NO R98 SHEET OF
6 ollard R-98 General escription: 0 / 8) Secure bollard cap R-98 Solar Light ollards increase safety and visibility for High-capacity batteries allow lights to operate for days hoose from a range of custom lighting colors, distribution in of colors. ) Secure bollard base with " washer and " nut. Height: " ase iameter: " Weight: lbs ( ollard Only ) Material: Steel ase with luminum ap /" x 0" (iameter x Height) Max. ar Height /8 Max. interior post /" x 0" ( dia. x height) Filled with concrete Existing oncrete ) Use hammer drill to make hole /8" dia. x " depth. ) lean drill hole of debris. ) aulk adhesive into hole from bottom up and fill / full. ) Push threaded bar into adhesive and turn to ensure bonding. ) Ensure bar is perpendicular and extend no more than " above grade. ) Wait at least minutes for adhesive to set. /bollard/colors-bollards Fixed - nchor asting in New oncrete (see sheet of ) Fixed - oncrete Insert nchor in Existing oncrete (see sheet of ) Fixed - dhesive nchor in Existing oncrete (see sheet of ) Post over - New Post in New oncrete (see sheet of ) Post over - Existing Post with dhesive nchor (see sheet of ) Light olor Options: 00K Neutral White 000K Warm White im to hours hours im to hours hours ) ollard post is provided as shown. oncrete, foundation and/or installation ordered separately or provided by others. ) Minimum foundation sizes depend on local soil conditions, weather conditions, and engineering requirements. ) imensions provided herein is for reference only. Please consult Reliance Foundry sales professionals if any dimension ) Reliance Foundry reserves the right to amend design and specifications without prior notice for product improvement. ) Measuring tape ) /" wrench ) Special hex key ) Hammer drill ) /8" Masonry drill bit ) aulking gun and utility knife PRTS LIST PRT NUMER ESRIPTION MTERIL R98 R98 ollard ase Steel Powder oated R98 R98 ollard Solar Light ap ( Option of SYM or SYM ) ast luminum Powder oated dhesive nchor 00+ Gold dhesive nchoring System Vinylester dhesive Mortar R00R " R00 Threaded ar " ustom Order Length Washer " O " Washer " O " Thick /8" Hex Nut " Hex Nut " - requires /" wrench utton Head olt TR /" x /" Hexagon Socket utton Head ap olt Tamper Resistant /" x /" - requires special hex key Stainless Steel OPYRIGHT RESERVE THIS PLN RWING N ESIGN RE, N T LL TIMES REMIN, THE EXLUSIVE PROPERTY OF RELINE FOUNRY O. LT. lbs 9 lbs /8 lbs T /8 lbs / lbs Unit 0, 0-8 Street, Surrey, VS G, anada info@reliance-foundry.com NOT TO SLE ollard R-98 WG NO R98 SHEET OF
AAE Model No. PVS-HSX High School Premier Pole Vault Standards
E Model No. PVS-HSX High School Premier Pole Vault Standards luminum thletic Equipment 1000 Enterprise rive, Royersford, P 19468 Toll Free: (800) 53-5471 Fax: (610) 85-378 www.esports.com 8 7 6 5 4 3 1
More informationDME Final Project Brief Project Summary
Matthew radley Omar Ghani ME Final Project 0070 rief Project Summary Objective To design a retracting mechanism for a communication board that is to be attached to a mobile wheelchair, with the following
More informationPRODUCT DETAILS HR Series
PROUT ETILS N. uyamaca, El ajon, 900 escription: The patented cast parts are designed for round, tubular handrails. The part is attached with two stainless steel tamper resistant screws and two-part epoxy.
More informationWaterpipe Ground Clamps. 1/2 in., 3/4 in., 1 or rebar /4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 AWG
Waterpipe Ground Ground Wire Size Water Pipe Size 2-T 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 WG 2-1/2 in., 3 in. or 3-1/2 in. 5-T 4 in., 4-1/2 in. or 5 in. 6 6
More informationSTRATUS SHELTER. Take bike parking to new heights
Take bike parking to new heights The Stratus Shelter is a striking bike shelter option for any transit station, university campus, or multi-family residential building project. It is constructed of American
More informationWave Bike Rack specs SPECS AND INSTALL INSTRUCTIONS. Deluxe Wave Style Bike Rack. Series Names & Model # s. Product maintenance. Thermoplastic Coating
SPES ND INSTLL INSTRUTIONS Deluxe Wave Style ike Rack SKU: Series Names & Model # s 8 F7WIRQ InGround Post Mount Wave ike Racks Wave ike Rack specs KP/G3, KP/G5, KP/G7, KP/G9, KP/G11, KP/G13 Plate Surface
More informationTO O L K IT. Public Bike Repair
TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel
More informationH O O P RAC K. Simple Security
H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationPURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
More informationKO LO SH E LT E R. High Capacity and Flexibility
KO LO SH E LT E R High Capacity and Flexibility The unique styling of our redesigned Dero Kolo Shelter will help beautify your facility and provide secure, covered bike parking for cyclists. The Kolo is
More informationSwerve Rack CUSTOM RACKS AVAILABLE
CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.
More informationKOLO SHELTER Installation Instructions Parts List
Parts List Roof Cap Rafter Upright Polycarbonate Polycarbonate Drop Polycarbonate Flange Center Weldment (Short length shown above) Polycarbonate Edge Bolt.25 x 6.5 Bolt.625 x 7.5 Threaded Rod.75 x 14
More informationPart No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
More informationH O O P RAC K. Simple Security
H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop
More informationInstallation and Assembly - Articulating Swivel Double-Arm for 42" - 71" Plasma Screens
Installation and ssembly - rticulating Swivel Double-rm for 42" - 71" Plasma Screens Models: PLV 70, PLV 70-S R This product is UL Listed. It must be installed by a qualified professional installer. Maximum
More informationE.M.T. Set-Screw Connectors. Technical Specifications
Set-Screw onnectors Regular Insulated I5404 (-IT) / I5408 (-IT) Steel Locknut I5004 (-IT) / I5008 (-IT) I5020 (-IT) / I5032 (-IT) I5410 (-IT) / I5432 (-IT) Steel Locknut I5010 (-IT) / I5016 (-IT) I5054
More informationDOCK WEDGE - STANDARD
DOCK WEDGE - STANDARD INSTALLATION INSTRUCTIONS WOOD HEADER READ ALL INSTRUCTIONS BEFORE INSTALLING SEAL. SUPER SEAL MFG. LTD. WILL NOT BE HELD RESPONSIBLE FOR IMPROPER INSTALLATION OF ANCHORING DEVICES,
More informationS W E RV E RAC K. Simple Security. Simple Stability.
S W E RV E RAC K Simple Security. Simple Stability. The Swerve Rack is a proven design that provides high security and easy bike parking. The Swerve Rack uses thick pipe construction and the full radius
More informationIndependent Containment System (ICS)
Installing the Independent Containment System (ICS) Complete these instructions to install the Independent Containment System (ICS). Prerequisites This installation requires a team of at least two people.
More informationJ-BOLT ANCHOR INSTALLATION
instlltion INSTRUTIONS electrician in accordance with the National lectrical ode 1. Install supplied J-bolt anchor (galvanized J-bolt 1/2-13 thread, 14 inches long) assembly over electrical supply conduit
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7+ Adhesive Umbrella Inserts
More informationBike Locker Model DBL1 & DBL2
Bike Locker Model DBL1 & DBL2 DBL1 & DBL2 are constructed of 99% recycled steel and is available in 20 standard powder coat colors or a galvanized finish. DBL1 & DBL2 store 1 or 2 bikes effortlessly and
More informationBIKE FILE (301)
B IK E F I L E High Efficiency The Bike File is our most space efficient u-lock compatible product. Sturdy sliding hangers allow nine bikes to be securely stored in an eight-foot section while allowing
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationB3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
More informationBumper Sign INSTALLATION INSTRUCTIONS
Bumper Sign INSTALLATION INSTRUCTIONS BUMPERSIGN TOOL CHECKLIST SDS MAX Rotary Hammer Drill Marker/Pencil SDS MAX 1 Carbide Drill Bit Tape Measure Torque Wrench with ½ Drive Power Source Vacuum ½ Drive
More informationHOOP RACK HEAVY DUTY Setbacks WALL 36" WALL 42" 36" STREET 59" STREET Dero
Setbacks WALL 36" WALL 42" STREET 36" 59" STREET Installation Instructions Tape Measure Marker or Pencil Masonry Drill Bit Drill (Hammer drill recommended) Hammer Wrench 9/16 Level RECOMMENDED BASE MATERIAL
More informationHSDC High School Discus Cage
HS High School iscus age luminum thletic quipment 000 nterprise rive, Royersford, P 968 Toll ree: (800) 5-57 Phone: (60) 85-6565 www.myworld.com 6 5 HS High School iscus age Ground Sleeve Placements X
More informationINSTALLATION INSTRUCTIONS
ECLIPSE CANOPY INSTALLATION INSTRUCTIONS IMPORTANT NOTE: ENSURE ALL RELEVANT PERSONNEL READ THE POINTS LISTED WITHIN THIS LEAFLET AND THAT A COPY IS GIVEN TO STAFF INVOLVED WITH THE INSTALLATION AND MAINTENANCE
More information4 BAY Low Profile WALL MOUNT CABINET
D1/347 SSEMLY INSTRUCTIONS 4 Y Low Profile WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use to prevent tipping in compliance with capacity of cabinet specified. Use with heavier
More informationMODEL # SLIDE-P(N) ASSEMBLY INSTRUCTIONS
MOL # SLI-P(N) SSMLY INSTRUTIONS 0-07-9 SPIFITIONS SPIFITIONS: Uprights: Shall be 3.5 O.. steel tubing, 2 gauge(.09 wall), powder coated after fabrication. ecks: Shall be 2 gauge punched steel with a PV
More informationLarge Diameter Tapcon
CONCRETE ANCHORING SPECIALISTS Large Diameter Tapcon (LDT ) Anchors Finished head, Removable Anchor DESCRIPTION/SUGGESTED SPECIFICATIONS Self-threading Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE The
More informationQLF215 INSTRUCTION MANUAL
QLF215 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We re ready to help! 1 2 3 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
More informationAccess Risers and Tank Adapters
Access Risers and Tank Adapters Installation Instructions Access risers provide access to septic tank openings, simplifying inspection and maintenance procedures. It is important that the riser be sized
More informationALUMINUM POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: All aluminum construction for superior corrosion resistance. Dual height scales provide English and Metric measurements ranging from 7' to 8'. Wide stance base for improved
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationInstallation and Assembly: Ceiling mount for LCD screens up to 29"
Installation and Assembly: eiling mount for L screens up to 29" Models: L18-, L18-S, L36-, L36-S Features: omes in two adjustable height ranges (in 1" increments): 18"-30" and 36"-48" -5 to +20 adjustable
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationNext Level Security. This 2-tier locker ships flat to save on freight, comes in galvanized and powder coat finish options, and has a modular design.
T WO - T I E R B IK E LO C K E R Next Level Security We take long-term bicycle storage to new heights with the new Dero Two-Tier Bike Locker. It is easy to load and provides a space-saving solution to
More information20,00 20,00 3,00 TYP. R5,00 1,00 TYP. R3,00 TYP. 2X 4,00 THRU 1,00 TYP. 10,00 10,00 (5,00) 10,00 10,00 19,00 7,00 4,50 THRU R15,00 12,00
,00,00,00 0,0 70,00 0,00 R,00,00 TYP.,00 TYP. R,00 TYP.,00 TYP. X,00 THRU 0,00 0,00 0,00 0,00 0,00 0,00 0,00 (,00) 0,00 0,00 SETION - 9,00 0 0 7,00,0 THRU 0,0 R,00 R,00 R0,0 TYP. ETIL,00 ompetitor: Stainless
More informationRELINER INSIDE DROP SYSTEM SPECIFICATIONS
1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme
More informationToday s Service Station
F I X IT Today s Service Station The Fixit includes all the tools necessary to perform basic bike repairs and maintenance, from changing a flat to adjusting brakes and derailleurs. The tools and air pump
More informationPickup Box Utility Rack Package Installation (Instruction ID: )
017 Chevrolet Colorado Pickup - WD (VIN S) Canyon, Colorado Accessory Installation Manual N America Document ID: 3966961 Pickup Box Utility Rack Package Installation (Instruction ID:3144879) Installation
More information4 BAY Low Profile - SINGLE XL DISPLAY WALL MOUNT CABINET
D1/347Mxl SSEMLY INSTRUCTIONS 4 Y Low Profile - SINGLE XL DISPLY WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use with video monitors weighing 300 lbs (136kg) or less. Use with
More informationMounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome
VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationInstallation and Assembly: Flat-Panel Base Lock-Down Kit for Samsung Display Models
Installation and ssembly: Flat-Panel Base Lock-own Kit for Samsung isplay Models Models: HLG452-SM, HLG452-SM-Q10 Maximum isplay Size: 100 lb (45.35 kg) 3215 W. North ve. Melrose Park, IL 60160 (800) 729-0307
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and Stubby Screens High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7 Adhesive
More information96 (Standard Length)
Setbacks 96 (Standard Length) Bike Files may be lined up end to end to fill the available space. A 36 aisle should be left between the ends of bikes in racks facing one another. 36 aisle 50 Installation
More informationIberville. Commercial Grade Fittings EMT CI5410 / CI5432 CI5410IT / CI5432IT CI5404 / CI5408 CI5404IT / CI5408IT CI5004 (-IT) / CI5008 (-IT)
ommercial Grade Fittings Set-Screw Fittings I5404 / I5408 I5404IT / I5408IT I5004 (-IT) / I5008 (-IT) I5410 / I5432 I5410IT / I5432IT I5010 (-IT) / I5016 (-IT) Regular Insulated Set-Screw Fittings (Steel)
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationSADDLE BUDDY EASY ASSEMBLY. The Saddle Buddy is easy to install Galvanized Surface In-Ground. Rail.
SAD D L E B U D DY Saddle Up. Designed for trailheads, bike parks and picnic areas, the Saddle Buddy offers a resting place for cyclists noble steeds. The convenient bar allows cyclists to keep their bikes
More informationSteel Floor Connections
Steel Floor Connections Pioneering high strength steel connections since 1934 2 Steel Floor Connections by Lindapter Welcome For over 80 years Lindapter has earned a respected reputation as the pioneer
More informationDERO BIKE LOCKER 33. Maximum Security
Maximum Security The Dero Bike Locker 33 offers bike parking for a single bicycle per unit, thus providing a narrower footprint when space is limited. This affordable bike locker is a perfect option for
More informationInstallation Instructions for: Saris Cycle Aid. Saris Cycle Air. Saris Cycle Air HD
Installation Instructions for: Saris Cycle Aid Saris Cycle Air Saris Cycle Air HD A. Setbacks Parallel Wall or object Setbacks: Both sides of the Saris Cycle Aid should be at least 48 from walls or other
More informationSTEEPLE GATE BARRIER SET INSTRUCTIONS
740141 - STEEPLE GTE RRIER SET The 740141 Steeple Gate arrier Set consists of four height adjustable barriers; one 5 meter wide beam and three 4 meter wide beams. These barriers can also be used to effectively
More information7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationPURE150-PRO CHEMICAL ANCHOR
PURE150-PRO CHEMICAL ANCHOR www.dewalt.com/anchors FAST CURING & HIGH STRENGTH ADHESION. The Pure150-PRO is a two-component high strength epoxy adhesive anchoring system designed for bonding steel elements
More informationINSTALLATION INSTRUCTIONS 480-4SBB / 480-6SBB SURFACE MOUNT BOX w/battery COMPARTMENT
480-4SBB / 480-6SBB SURFACE MOUNT BOX w/battery PARTMENT 4-5/8 [117mm] 1-3/4 [44mm] 4X HOLES 4-5/8 [117mm] 4X INTEGRAL PINS BATTERY PARTMENT ACCESS COVER BLACK ABS MATERIAL BOX EQUIPPED FOR WIRED OR WIRELESS
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationNOTE: Landscape Forms is not responsible for site preparation, footings, or electrical wiring.
11/2009 Stop Embedded Mount Bollard HANDLE WITH CARE! Pangard II Polyester Powder coat is a strong, long-lasting finish. Protect this finish from damage during installation. Place unwrapped powder coated
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More informationC Cuisine Cart IMPORTANT NOTE
88 9001 001C Cuisine Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More information4 BAY Low Profile-Dual Displays WALL MOUNT CABINET
D1/347M2 SSEMLY INSTRUTIONS 4 Y Low Profile-Dual Displays WLL MOUNT INET TIP HZRD WRNING! abinet must be affixed to wall. For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions
More informationTREX POST MOUNT DECKING AND CONCRETE
TREX POST MOUNT DECKING AND CONCRETE for Pressure-treated Wood Framing LOCATION AND INSTALLATION OF POST MOUNTS IMPORTANT NOTES:» EACH POST MUST BE ATTACHED AS SHOWN TO ENSURE A CODE COMPLIANT AND SAFE
More informationLid, Floor Monument and Two Installation Fixtures. Floor Monument Installed with Lid On and Off
Monumentation Drilling Specifications: Floor Monuments: - Floor is drilled using 1 3/4" core drill bit to a depth of 2 with a Hilti rotary hammer drill - Quikrete is used to set monuments into the floor
More informationToday s Service Station
F I X I oday s Service Station he Fixit includes all the tools necessary to perform basic bike repairs and maintenance, from changing a flat to adjusting brakes and derailleurs. he tools and air pump are
More informationQLF214 INSTRUCTION MANUAL
QLF214 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. (UK: 0800 056 2853) We re ready to help! CAUTION: IMPORTANT SAFETY INSTRUCTIONS
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationInstallation Instructions for Bike Fixtation Public Work Stand and Floor Pump Manual RevH
Installation Instructions for Bike Fixtation Public Work Stand and Floor Pump Manual 311110 RevH Parallel Wall or object Setbacks: Both sides of the Public Work Stand should be at least 48 from walls or
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationInstallation Guide Tilt/Swivel Flush Mount for 23'' and Larger Flat Panel Displays
Installation Guide Tilt/Swivel Flush Mount for 23'' and Larger Flat Panel isplays WRNING: This mounting system has a weight limit of 100 lbs [45.36 kg]. o not mount a display weighing more than 100 lbs
More informationCSS Central Mount System
CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning
More informationF-5-1a. Concrete Bollards (Detail 1 of 2) WEIGHT: 166kg. WEIGHT: 227kg. WEIGHT: 113kg. WEIGHT: 212kg
Contents F-5-1a Concrete Bollards F-5-1b Concrete Bollards F-5-2 Concrete Bollards with City Logo F-5-3 Cast Iron Bollards F-5-4 Decorative Steel Bollard F-5-5 Swivel P Gate Steel Bollard F-5-6 Steel Bollard
More informationPEMBRIDGE PICNIC TABLE INSTRUCTIONS MANUAL
PEMBRIDGE PICNIC TABLE INSTRUCTIONS MANUAL IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE Please also refer to the Manual Handling Operations Regulations 1992 during
More informationPOWER-Skru Large Diameter Concrete Screw
POWER-Skru Large Diameter Concrete Screw Description The POWER-Skru Large Diameter Concrete Screw is a highstrength screw anchor with self-tapping threads that offer a unique undercutting design for anchoring
More information3. Use base plate as template (see FIG. 4-1) to mark location for fasteners.
Plan the layout of the railing it is the beginning of a successful project. Getting Started... 1. Completely read the application instructions before starting the installation of the railing. 2. Properly
More informationIntroduction. Depending on your kennel project, you may have some or all of the following hardware: Part # Description Part # Description 1468
Introduction Thank you very much for your investment in Mason kennels. We take great pride in providing our customers with the highest quality animal enclosures combined with an enjoyable ordering experience.
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED
More informationFIXED MOUNTING SHUTTERS INSTALLATION
FIXED MOUNT APPLICATIONS The following components are included for Fixed Mount Applications. (4) Polycarbonate mounting brackets (slotted) (8) #10 x ¾ Stainless Steel Mounting Screws (1) 0.5 oz. Tube All-Weather
More informationOriginal Gallery System
GAllery System Art Displays Original Gallery System a Gallery System product Here s everything you need to know to get started with your Gallery System Art Hanging System GS getting started To install
More informationInstallation manual. For setting in concrete/on base plates - Panel height 1830
1 Aluminium fencing and drive-in gates Installation manual For setting in concrete/on base plates - Panel height 1830 Aluclos system components: U10 Connecting U-bracket 1900 mm CL18/CL18.XL Half-height
More informationInstallation and Assembly: Wallmount for CPA100 and Whiteboard
Installation and ssembly: Wallmount for CP100 and Whiteboard Model: 100IWBMOUNT Maximum Load Capacity for Screen: 53 lb (24 kg) Maximum Load Capacity for Projector : 13.5 lb (6 kg) 1 of 16 Visit 3215 the
More informationLeila Assembly P4 White 21.6 mm 14.7 mm Round PMMA PC Glue Ready
Leila LZ series Ordering number F0787 escription F0787LZM Family Type LE olor iameter Height Style Optic Material Material Fastening Status Leila ssembly P White.6 mm.7 mm Round PMM P Glue Ready FWHM Efficiency
More informationInstallation and Assembly: Flat \ Tilt Wall Mount for VESA 400x400
Installation and ssembly: Flat \ Tilt Wall Mount for VES 400x400 Model: T642-003 Max Load Capacity: 100 lb (45.4 kg) 3215 W. North ve. Melrose Park, IL 60160 (800) 729-0307 or (708) 865-8870 Fax: (708)
More informationADJUSTABLE BASKETBALL SYSTEM ASSEMBLY INSTRUCTIONS AND OWNER'S MANUAL
IRONCLAD SPORTS, INC HIGHLIGHT HOOPS ADJUSTALE ASKETALL SYSTEM ASSEMLY INSTRUCTIONS AND OWNER'S MANUAL MODEL: HIL885!! WARNING FAILURE TO COMPLY WITH ANY OF THE WARNINGS IN THESE INSTRUCTIONS MAY RESULT
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationQLF214 INSTRUCTION MANUAL
QLF214 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 We re ready to help! Scan for easy install video san.us/1145 CAUTION: IMPORTANT
More informationEquilibrium. Conference Table. Installation Instruction. Revision B 11/07/16
Equilibrium Conference Table Installation Instruction Revision B 11/07/16 Equilibrium End User Agreement Enwork Equilibrium table bases must be installed directly onto a four inch minimum thickness concrete
More informationULT R A S PACE SAV E R SQ UA R E D
ULT R A S PACE SAV E R SQ UA R E D Hip to be Square Dero s Ultra Space Saver Squared offers high-security, vertical bike parking. Adjustable sliding arms make it easy for customers to best utilize their
More informationInstallation and Assembly: Full Service Video Wall Mount
Installation and Assembly: Full Service Video Wall Mount Model: DS-VW765-LAND Max UL Load Capacity: 125 lb (57 kg) 1 of 12 ISSUED: 05-13-11 SHEET #: 145-9011-5 05-21-12 Note: Read entire instruction sheet
More informationSafe and secure Dero
B I K E D E P OT Safe and secure Whether the project is at a transit station, university campus, or residential building, the Bike Depot s modular design lets customers easily build out to meet their space
More informationDX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations
ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3
More informationSecure Bike Parking. Patent Pending Dero
VE LO P O RT Secure Bike Parking The graceful lines and modern laser-cut design makes the Veloport stand out while still offering the security and durability you need in your long-term bike parking. Each
More informationVEX-P. Combination of Drilling and Front and Back Chamfering in One Operation. carbide drill tip combined with patented. blade replacement.
ombination of rilling and Front and Back hamfering in One Operation. carbide drill tip combined with patented blade replacement from stock at. No. HT015 ase Study atalog HT015No. HT14 Study etails TOOL
More information