TECHNICAL DESCRIPTION. modelling
|
|
- Arnold Garrison
- 6 years ago
- Views:
Transcription
1 TECHNICAL DESCRIPTION prototype modelling WorldSkills International TD45 v4.0 WSC2013
2 WorldSkills International, by a resolution of the Technical Committee and in accordance with the Constitution, the Standing Orders and the Competition Rules, has adopted the following minimum requirements for this skill for the WorldSkills Competition. The Technical Description consists of the following: 1. INTRODUCTION COMPETENCY AND SCOPE OF WORK THE TEST PROJECT SKILL MANAGEMENT AND COMMUNICATION ASSESSMENT SKILL-SPECIFIC SAFETY REQUIREMENTS MATERIALS & EQUIPMENT MARKETING THE SKILL TO VISITORS AND MEDIA... 9 Effective John Shiel Chair Technical Committee Stefan Praschl Vice Chair Technical Committee WorldSkills International (WSI) reserves all rights in documents developed for or on behalf of WSI, including translation and electronic distribution. This material may be reproduced for non-commercial vocational and educational purposes provided that the WorldSkills International logo and copyright notice are left in place. Prototype Modelling 1 of 9
3 1. INTRODUCTION 1.1 Name and description of skill The name of the skill is Prototype Modelling Description of skill When a product goes into production a prototype model is created according to design criteria and specifications. The final design is determined through testing and modifications with the created prototype model. Prototype modelling showcases the skills needed to materialise design ideas and it is an essential sector of industry for developing attractive products. 1.2 Scope of application Every Expert and Competitor must know this Technical Description In the event of any conflict within the different languages of the Technical Descriptions, the English version takes precedence. 1.3 Associated documents As this Technical Description contains only skill-specific information it must be used in association with the following: WSI - Competition Rules WSI - Online resources as indicated in this document Host Country - Health and Safety regulations 2. COMPETENCY AND SCOPE OF WORK The Competition is a demonstration and assessment of the competencies associated with this skill. The Test Project consists of practical work only. 2.1 Competency specification The Competitor shall be able to work with: 3D CAD systems Preparing 2D drawings Creating prototype models using hand tools and machines Transferring and creating copies of parts Finishing prototype model surfaces Painting prototype model with spray cans Decorating prototype model with given sticker given standard plastic materials: PU-Chemical wood, casting resin, celcoat, laminating resin, acryl glass, PVC ect. only cutting, sanding, gluing and painting (no forming under heat and polishing) using the own measurement equipment Prototype Modelling 2 of 9
4 The Competitor shall have the knowledge and understanding of: Creating prototype models based on the design based the specified materials, hand tools and machines Negative and positive moulding Modifying minor product details Design The provided 3D-CAD software (for example: Inventor, SolidWorks, ProE etc.) ISO standards for drawings Creating parts, assembling and drawings with the provided 3D-CAD software incl. dimensioning Characteristics, risks and processing methods of: casting resin, laminating resin, chemical wood materials Risk and use of spray cans Characteristics, risks and processing methods of modelling materials Use and safety of small electric tools (only with dust extractor), disc sanding machiines, bobbin sanding machines, milling and drilling machines, band saw and turning lathe Use hand tools (knife, file, chisel, gouge, etc.) Use of measurement tools Skill assessment specification and weighting Health and safety to use the specified modelling materials Become familiar with the host country s Health and Safety Regulations documentation 2.2 Theoretical knowledge Theoretical knowledge is required but not tested explicitly Knowledge of rules and regulations is not examined. 2.3 Practical work The Competitor shall be able to work on the practical work by himself: Creating prototype model based on 3D CAD data and 2D drawing, using hand tools and machines (CAM or computerised machines are not allowed) Using 3D CAD system (part, assembling, drawing) Preparing and dimensioning a 2D drawing based on the 3D CAD data Working with the specified materials based on the selected test project like: chemical wood, casting resin, laminating resin Modifying minor product details creative Finishing prototype model surfaces Painting prototype model with spray cans Decorating prototype model with given materials 3. THE TEST PROJECT 3.1 Format / structure of the Test Project The format of the Test Project is a series of four standalone modules. Module A: Designing the given Test Project by using 3D CAD Module B: Preparing a 2D drawing based on the 3D CAD Module C: Making the prototype model (surface, size and assembling) Module D: Surface finishing, painting and decorating Prototype Modelling 3 of 9
5 3.1 Test Project design requirements The Test Project must be something that is well-known to the general public throughout the world and something that people touch when using it. Competitors are given a drawing and specification for their Test Project. Competitors are only allowed to modify minor product details of the Test Project. The drawing of the Test Projects needs to include at least 20 parts of specified dimensions. 3.2 Test Project development The Test Project MUST be submitted using the templates provided by WorldSkills International ( Use the Word template for text documents and DWG template for drawings Who develops the Test Project / modules The Test Project / modules are developed by: All Experts. Only one Test Project proposal is allowed per Expert How and where is the Test Project / modules developed By individual Experts 5 months before the Competition the Experts upload their Test Project proposals to the forum for all Experts to see When is the Test Project developed The Test Project is developed according to the following timeline: Time Activity 5 months before the Competition Experts upload their proposed Test Project module 4 months before the Competition The Test Project is selected from the proposals by vote of Experts on the forum 3 months before the Competition The Test Project is circulated on the WSI website At the Competition At least 30% change is made to the Test Project 3.3 Test Project marking scheme Each Test Project must be accompanied by a marking scheme proposal based on the assessment criteria defined in Section The marking scheme proposal is developed by the person(s) developing the Test Project. The detailed and final marking scheme is developed and agreed by all Experts at the Competition Marking schemes should be entered into the CIS prior to the Competition. 3.4 Test Project validation Upon completion of the Test Project modules, all Experts must confirm that Competitors can complete the Test Project modules by using the materials and equipment provided and expected level of knowledge within the time constraints. 3.5 Test Project selection The Test Project is selected as follows: By vote of Experts on the Discussion Forum 4 months before the Competition Prototype Modelling 4 of 9
6 3.6 Test Project circulation The Test Project is circulated via WorldSkills International website as follows: 3 months before the Competition 3.7 Test Project coordination (preparation for Competition) Coordination of the Test Project will be undertaken by: Chief Expert 3.8 Test Project change at the Competition At the Competition during the preparation days, all Experts cooperate and change at least 30% of each selected Test Project module. The changes will be done a professional assistant. 3.9 Material or manufacturer specifications The Competition Organiser informs Experts of material specifications required for the Test Project through the Infrastructure List provided by WorldSkills International 6 months prior to the Competition. 4. SKILL MANAGEMENT AND COMMUNICATION 4.1 Discussion Forum Prior to the Competition, all discussion, communication, collaboration and decision making regarding the skill must take place on the skill-specific Discussion Forum ( All skill-related decisions and communication are only valid if they take place on the forum. The Chief Expert (or an Expert nominated by the Chief Expert) will be moderator for this forum. Refer to Competition Rules for the timeline of communication and competition development requirements. 4.2 Competitor information All information for registered Competitors is available from the Competitor Centre ( This information includes: Competition Rules Technical Descriptions Test Projects Other Competition-related information 4.3 Test Projects Circulated Test Projects will be available from worldskills.org ( and the Competitor Centre ( 4.4 Day-to-day management The day-to-day management is defined in the Skill Management Plan that is created by the Skill Management Team led by the Chief Expert. The Skill Management Team comprises the Jury President, Chief Expert and Deputy Chief Expert. The Skill Management Plan is progressively developed in the six months prior to the Competition and finalised at the Competition by agreement of the Experts. The Skill Management Plan can be viewed in the Expert Centre ( Prototype Modelling 5 of 9
7 5. ASSESSMENT This section describes how the Experts will assess the Test Project / modules. It also specifies the assessment specifications and procedures and requirements for marking. 5.1 Assessment criteria This section defines the assessment criteria and the number of marks (subjective and objective) awarded. The total number of marks for all assessment criteria must be 100. Section Criterion Marks Objective Subjective (if applicable) Total A Module A: 3D CAD design B Module B: Preparation of drawings C Module C: Modelling D Module D: Painting Total = Subjective marking Scores are awarded on a scale of 1 to = perfect 9 = very good 8 = good 7 = rather good 6 = sufficient 5 = medium 4 = weak 3 = insufficient 2 = very bad 1 = zero 5.3 Skill assessment specification Module A 3D CAD Design A.1 Completeness of 3D drawings (objective) Module B Preparation of drawings B.1 Completeness of 2D drawings views and sections (objective) B.2 Dimension completed (objective) 5% objective 5% objective Module C Modelling/Manufacturing C.1 Originality of design (subjective) C.2 Functionality of design (subjective) C.3 Conformity to specifications (objective) C.4 Conformity to specified dimensions (objective) C.5 Conformity to 2D and 3D drawings (objective) Module D - Painting D.1 Finish of the painted surface (subjective) D.2 Attractive display of colours (subjective) 10% subjective and 75% objective 5% subjective 5.4 Skill assessment procedures Items to be assessed & the allocation of marks are decided by Experts before the Competition. A judgment form identical to the one used by Experts is provided to each Competitor to ensure transparency. Prototype Modelling 6 of 9
8 The Chief Expert or Deputy Chief Expert divides all Experts into several marking teams. In such cases, WorldSkills experience at a previous Competition is taken into consideration as well as culture, language and continent. If Experts have the possibility to measure the dimensions for objective marking by a digital measuring machine, the Experts can decide and organise it before the Competition. In this case, the measurement will be done by a professional assistant who is familiar with it. When the subjective marking and objective marking are performed on a module, the subjective marking should be performed first (every marking day) Progressive marking is used for each completed module. 5.5 Skill assessment weighting Objective marking Scores are awarded on a scale of 1 to = ±0 to ±0.2 8 = ±0.21 to ±0.3 6 = ±0.31 to ±0.4 4 = ±0.41 to ±0.5 2 = ±0.51 to ±1.0 1 = Exceeding ±1.0 0 = Not completed Angles +/-30' = 10 points +/-1 = 5 points Above 1 = 0 points Plastic fillets and radii +/-0.5mm = 10 points Above 0.5mm = 5 points Not attempted = 0 points Minimum one fillet, radii and angle must be measured. 6. SKILL-SPECIFIC SAFETY REQUIREMENTS Refer to Host Country Health & Safety documentation for Host Country regulations. No pneumatic tools are allowed for Creative Modelling. Only electric hand tools with dust extractors are allowed. 7. MATERIALS & EQUIPMENT 7.1 Infrastructure List The Infrastructure List details all equipment, materials and facilities provided by the Competition Organiser. The Infrastructure List is online ( The Infrastructure List specifies the items & quantities requested by the Experts for the next Competition. The Competition Organiser will progressively update the Infrastructure List specifying the actual quantity, type, brand/model of the items. Items supplied by the Competition Organiser are shown in a separate column. Prototype Modelling 7 of 9
9 At each Competition, the Experts must review and update the Infrastructure List in preparation for the next Competition. Experts must advise the Technical Director of any increases in space and/or equipment. At each Competition, the Technical Observer must audit the Infrastructure List that was used at that Competition. The Infrastructure List does not include items that Competitors and/or Experts are required to bring and items that Competitors are not allowed to bring they are specified below. CAD system must be able to support CAD software, and software provided must be according to Competitor s preferred language. 7.2 Materials, equipment and tools supplied by Competitors in their toolbox Individual Competitors must bring equipments such as safety shoes, work clothes, dust-proof glasses and a gas mask. Competitors must bring tools that are required to complete a series of Test Projects. A tool list is provided below for reference purposes. Hand tools for processing: Chisels, planes, cutting tools such as knives, and files Electric tools for processing (allowed only with dust extractor): Hand grinder, coupler and bits for cutting, etc. Measuring tools: Measuring tools such as a scale, vernier and depth gauge, etc Resin material tools: Spatula Painting tools: A gas mask that conforms to the safety standard in the Host Country Masking tools 7.3 Materials, equipment and tools supplied by Experts Not applicable 7.4 Materials & equipment prohibited in the skill area CAD systems other than those provided at the Competition Computerised machines and tools other than those provided at the Competition Already prepared parts cannot be used for the Test Project 7.5 Proposed workshop and workstation layouts Workshop layouts from London are available at: Prototype Modelling 8 of 9
10 Workshop layout: 8. MARKETING THE SKILL TO VISITORS AND MEDIA 8.1 Maximising visitor and media engagement To maximise visitor and media engagement the following ideas may be considered: Try a trade Display screens Test Project descriptions Career opportunities Daily reporting of competition status 8.2 Sustainability Recycling Use of green materials Prototype Modelling 9 of 9
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION visual merchandising/ Window Dressing WorldSkills International TD44 v4.0 WSC2013 WorldSkills International, by a resolution of the Technical Committee and in accordance with the
More informationTechnical Description. Mechanical Engineering Design - CAD
Technical Description Mechanical Engineering Design - CAD international WorldSkills International TD05 v2.0 - WSC2009 WorldSkills International, by a resolution of the Technical Committee and in accordance
More informationTechnical Description. CNC Milling
Technical Description CNC Milling international WorldSkills International TD07 v2.0 - WSC2009 WorldSkills International, by a resolution of the Technical Committee and in accordance with the Constitution,
More informationTECHNICAL DESCRIPTION. WorldSkills International TD05 v5.0 WSC2015 MECHANICAL ENGINEERING DESIGN CAD MANUFACTURING AND ENGINEERING TECHNOLOGY
TECHNICAL DESCRIPTION WorldSkills International TD05 v5.0 WSC2015 MECHANICAL ENGINEERING DESIGN CAD MANUFACTURING AND ENGINEERING TECHNOLOGY WorldSkills International, by a resolution of the Technical
More informationWORLDSKILLS QUALITY ASSURANCE STANDARD
24 Date of Issue Document No. WORLDSKILLS QUALITY ASSURANCE STANDARD TD24 Approved Technical Description Cabinetmaking Revision 1 WorldSkills (International Vocational Training Organisation), by a resolution
More informationPlastic Die Engineering
Technical Description Plastic Die Engineering Manufacturing and Engineering Technology WorldSkills International TD043 v7.0 WSC2019 WorldSkills International, by a resolution of the Competitions Committee
More informationSample Test Project. District / Zonal Skill Competitions. Skill- CNC Milling. Category: Manufacturing & Engineering Technology
Sample Test Project District / Zonal Skill Competitions Skill- CNC Milling Category: Manufacturing & Engineering Technology Version 1 Dec 2017 Skill- CNC Milling 1 Table of Contents A. Preface... 3 B.
More informationSample Test Project. Category: Transportation & Logistics. Regional Skill Competitions - Level 3. Skill Car Painting
Sample Test Project Regional Skill Competitions - Level 3 Skill- Car Painting Category: Transportation & Logistics 1 Table of Contents A. Preface... 3 B. Test Project... 4 C. Marking Scheme... 6 D. Infrastructure
More informationSample Test Project. District / Zonal Skill Competitions. Skill- CNC Turning. Category: Manufacturing & Engineering Technology
Sample Test Project District / Zonal Skill Competitions Skill- CNC Turning Category: Manufacturing & Engineering Technology Version 1 Dec 2017 Skill- CNC Turning 1 Table of Contents A. Preface... 3 B.
More informationWORLDSKILLS STANDARD SPECIFICATION
WORLDSKILLS STANDARD SPECIFICATION Skill 03 Manufacturing Team Challenge WSC2017_WSSS03 THE WORLDSKILLS STANDARDS SPECIFICATION (WSSS) GENERAL NOTES ON THE WSSS The WSSS specifies the knowledge, understanding
More informationGCSE Engineering. Schemes of Work
GCSE Engineering Schemes of Work GUIDANCE FOR SCHEME OF WORK Please find below guidance on and an example of a scheme of work that could be applied for the GCSE Engineering specification. As every centre
More informationSample Test Project Regional Skill Competitions Level 3 Skill 23 - Mobile Robotics Category: Manufacturing & Engineering Technology
Sample Test Project Regional Skill Competitions Level 3 Skill 23 - Mobile Robotics Category: Manufacturing & Engineering Technology Version 3 May 2018 Skill - Mobile Robotics 1 Table of Contents A. Preface...
More informationSample Test Project District / Zonal Skill Competitions Skill- Mobile Robotic Category: Manufacturing & Engineering Technology
Sample Test Project District / Zonal Skill Competitions Skill- Mobile Robotic Category: Manufacturing & Engineering Technology Version 1 Dec 2017 Skill- Mobile Robotic 1 Table of Contents A. Preface...
More informationSkill India. National Skill Development Corporation (Transforming the skill landscape) Chandigarh Skill Competition. Test Project
Skill India India Skills N.S.D.C National Skill Development Corporation (Transforming the skill landscape) Chandigarh Skill Competition Test Project District / Zone Skill Competitions Skill- Architectural
More informationMake props using mixed media
Training Package Title Unit code CUEPRP07A Entertainment (CUE03) Make props using mixed media Unit Descriptor This unit describes the skills and knowledge required to interpret props production schedules
More informationSkills Canada National Competition Contest Description 26 Carpentry / Secondary and Post-Secondary May 27-30, 2015 Saskatoon
Skills Canada National Competition Contest Description 26 Carpentry / Secondary and Post-Secondary May 27-30, 2015 Saskatoon 1. The Importance of Essential Skills for Careers in the Skilled Trades and
More information24-27 MAY 2017 PUTRA WORLD TRADE CENTRE. THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION KUALA LUMPUR, MALAYSIA
24-27 MAY 2017 PUTRA WORLD TRADE CENTRE KUALA LUMPUR, MALAYSIA THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION EXHIBITORS PROFILE MACHINE TOOLS Boring, Broaching, CNC
More informationVCE Media: Administration information for School-based Assessment in 2018
VCE Media: Administration information for School-based Assessment in 2018 Units 3 and 4 School-assessed Task The School-assessed Task contributes 40 per cent to the study score and is commenced in Unit
More informationWORLDSKILLS STANDARD SPECIFICATION
WORLDSKILLS STANDARD SPECIFICATION Skill 27 Jewellery WSC2017_WSSS27 THE WORLDSKILLS STANDARDS SPECIFICATION (WSSS) GENERAL NOTES ON THE WSSS The WSSS specifies the knowledge, understanding, and specific
More informationSample Mobile Robotic Project State Skill Competitions Level 2 Skill 23 Category: Manufacturing & Engineering Technology
Sample Mobile Robotic Project State Skill Competitions Level 2 Skill 23 Category: Manufacturing & Engineering Technology Version 2 March 2018 Skill- Mobile Robotic 1 Table of Contents A. Preface 3 B. Test
More informationCONTEST DESCRIPTION DESCRIPTION DE CONCOURS ELECTRONICS ÉLECTRONIQUE POST-SECONDARY NIVEAU POSTSECONDAIRE
CONTEST DESCRIPTION DESCRIPTION DE CONCOURS ELECTRONICS ÉLECTRONIQUE POST-SECONDARY NIVEAU POSTSECONDAIRE 1. The Importance of Essential Skills for Careers in the Skilled Trades and Technology SCC is currently
More information2017 British Woodworking Federation
2017 British Woodworking Federation Background The woodworking sector employs the highest ratio of apprentices in the construction sector. Apprenticeship reform opens up new opportunities for employing
More informationTEST PROJECT MOBILE ROBOTICS FOR JUNIOR
TEST PROJECT MOBILE ROBOTICS FOR JUNIOR CONTENTS This Test Project proposal consists of the following documentation/files: 1. DESCRIPTION OF PROJECT AND TASKS DOCUMENTATION The JUNIOR challenge of Mobile
More informationEGS-CC. System Engineering Team. Commonality of Ground Systems. Executive Summary
System Engineering Team Prepared: System Engineering Team Date: Approved: System Engineering Team Leader Date: Authorized: Steering Board Date: Restriction of Disclosure: The copyright of this document
More informationWorkshop on Bihar State Skill Competitions. 7th Feb 2018
Workshop on Bihar State Skill Competitions 7th Feb 2018 Skill Competitions overview WHAT Skill Competition demonstrate technical abilities Execute specific tasks These tasks are ones that are required
More informationEuropean Charter for Access to Research Infrastructures - DRAFT
13 May 2014 European Charter for Access to Research Infrastructures PREAMBLE - DRAFT Research Infrastructures are at the heart of the knowledge triangle of research, education and innovation and therefore
More informationAPPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY
APPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY JULY 2016 Contents Page number Introduction 1 Subject aims and objectives 2 Subject content 3 Core technical principles 3 Core designing and
More informationCambridge International Examinations Cambridge International General Certificate of Secondary Education
Cambridge International Examinations Cambridge International General Certificate of Secondary Education *2410250691* DESIGN AND TECHNOLOGY 0445/32 Paper 3 Resistant Materials May/June 2018 1 hour Candidates
More informationVCE Systems Engineering: Administrative information for Schoolbased Assessment in 2019
VCE Systems Engineering: Administrative information for Schoolbased Assessment in 2019 Units 3 and 4 School-assessed Task The School-assessed Task contributes 50 per cent to the study score and is commenced
More informationDesign and Technologies: Engineering principles and systems and Materials and technologies specialisations Automatons
Sample assessment task Year level 10 Learning area Subject Title of task Task details of task Type of assessment Purpose of assessment Assessment strategy Evidence to be collected Technologies Design and
More informationPacco Industrial Corporation
Pacco Industrial Corporation Engineering Division Profile Core Competencies Product Design And Development. Concept sketching. Manufacturing detailing. Development & Prototyping. Reverse Engineering. Value
More information2013 SKILLS CANADA NATIONAL COMPETITION
2013 SKILLS CANADA NATIONAL COMPETITION CAR PAINTING 36 PROJECT INSTRUCTION SECONDARY Car Painting Total Time allocated: 12 hours FENDER PROJECT You will prime and paint a fender, as if it is a used OEM
More informationBIG IDEAS. Personal design interests require the evaluation and refinement of skills. Learning Standards
Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES BIG IDEAS Design for the life cycle includes consideration of social and environmental impacts. Personal design interests require the evaluation
More informationCONTEST DESCRIPTION / DESCRIPTION DE CONCOURS ELECTRICAL INSTALLATIONS INSTALLATIONS ÉLECTRIQUES SECONDARY / NIVEAUX SECONDAIRE
CONTEST DESCRIPTION / DESCRIPTION DE CONCOURS ELECTRICAL INSTALLATIONS INSTALLATIONS ÉLECTRIQUES SECONDARY / NIVEAUX SECONDAIRE Table of Contents 1 THE ESSENTIAL SKILLS FOR CAREERS IN THE SKILLED TRADES
More informationOutcome 3 Evaluate the outcomes of the design and production activities, and promote the product's design features to the client and/or end-user.
2010 School-assessed Task Report Design and Technology: Units 3 and 4 BACKGROUND INFORMATION The School-assessed Task is commenced in Unit 3 and completed in Unit 4. Components of the task relate to Unit
More informationDesign and Technology Resistant materials Key words and definitions
Design and Technology Resistant materials Key words and definitions Word Acrylic Definition a type of thermoplastic, which is hard and can be transparent. Used to make shop signs. Perspex is a trade/brand
More informationCONTEST DESCRIPTION / DESCRIPTION DE CONCOURS PLUMBING PLOMBERIE POST- SECONDARY / NIVEAUX POSTSECONDAIRE
CONTEST DESCRIPTION / DESCRIPTION DE CONCOURS PLUMBING PLOMBERIE POST- SECONDARY / NIVEAUX POSTSECONDAIRE Table of Contents 1 THE ESSENTIAL SKILLS FOR CAREERS IN THE SKILLED TRADES AND TECHNOLOGY... 3
More informationSAMPLE RESISTANT MATERIALS GCSE EXAMINATION PAPER
SAMPLE RESISTANT MATERIALS GCSE EXAMINATION PAPER https://www.facebook.com/groups/254963448192823/ WORLD ASSOCIATION OF TECHNOLOGY TEACHERS CENTRE NUMBER www.technologystudent.com 2018 V.Ryan 2018 CANDIDATE
More informationBIG IDEAS. Personal design interests require the evaluation and refinement of skills. Learning Standards
Ministry of Education Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Art Metal and Jewellery Grade 12 BIG IDEAS Products can be designed for life cycle. Personal design interests require the
More informationDESIGN AND TECHNOLOGY (Alternative Syllabus)
DESIGN AND TECHNOLOGY (Alternative Syllabus) AIMS To enable candidates to achieve technology literacy through the development of: 1. technological knowledge and understanding; 2. communicating and problem-solving
More informationArea of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGY Drafting Grade 10 BIG IDEAS. Complex tasks require the sequencing of skills.
Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGY Drafting Grade 10 BIG IDEAS Social, ethical, and sustainability considerations impact design. Complex tasks require the sequencing of skills. Complex
More informationSAMPLE RESISTANT MATERIALS GCSE EXAMINATION PAPER
SAMPLE RESISTANT MATERIALS GCSE EXAMINATION PAPER https://www.facebook.com/groups/254963448192823/ WORLD ASSOCIATION OF TECHNOLOGY TEACHERS CENTRE NUMBER www.technologystudent.com 2018 V.Ryan 2018 CANDIDATE
More informationLLOYDS BANKING GROUP MATTERS RESERVED TO THE BOARDS (LLOYDS BANKING GROUP PLC, LLOYDS BANK PLC, BANK OF SCOTLAND PLC & HBOS PLC)
LLOYDS BANKING GROUP MATTERS RESERVED TO THE BOARDS (LLOYDS BANKING GROUP PLC, LLOYDS BANK PLC, BANK OF SCOTLAND PLC & HBOS PLC) LLOYDS BANKING GROUP PLC, LLOYDS BANK PLC, BANK OF SCOTLAND PLC & HBOS PLC
More informationISO 2818 INTERNATIONAL STANDARD. Plastics - Preparation of test specimens by machining. Plas tiques - Preparation des eprouvettes par usinage
INTERNATIONAL STANDARD ISO 2818 Third edition 1994-08-15 Plastics - Preparation of test specimens by machining Plas tiques - Preparation des eprouvettes par usinage Reference number ISO 2818:1994(E) ISO
More informationEduc8 Engineering. Apprenticeship (NVQ/QCF) Levels 2, 3 and 4
Educ8 Engineering Apprenticeship (NVQ/QCF) Levels 2, 3 and 4 Are you thinking of growing your business? Do you need to consider succession planning? Does your current workforce need upskilling? If the
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD. Aerospace MJ threads Part 1: General requirements
INTERNATIONAL STANDARD ISO 5855-1 Third edition 1999-10-15 Aerospace MJ threads Part 1: General requirements Aéronautique et espace Filetage MJ Partie 1: Exigences générales A Reference number Foreword
More information6043 DESIGN AND TECHNOLOGY
www.onlineexamhelp.com www.onlineexamhelp.com CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2013 series 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1, maximum
More informationWIPO Development Agenda
WIPO Development Agenda 2 The WIPO Development Agenda aims to ensure that development considerations form an integral part of WIPO s work. As such, it is a cross-cutting issue which touches upon all sectors
More informationMembership Application
Membership Application Name of the Company : Key Person Name & Designation : Address : Tel : Fax : Email: Website: Name of the Nominee & Designation : Constitution : Public Ltd. Private Ltd. Proprietary
More informationCommittee on Development and Intellectual Property (CDIP)
E CDIP/10/13 ORIGINAL: ENGLISH DATE: OCTOBER 5, 2012 Committee on Development and Intellectual Property (CDIP) Tenth Session Geneva, November 12 to 16, 2012 DEVELOPING TOOLS FOR ACCESS TO PATENT INFORMATION
More informationDesign and Technology Subject Outline Stage 1 and Stage 2
Design and Technology 2019 Subject Outline Stage 1 and Stage 2 Published by the SACE Board of South Australia, 60 Greenhill Road, Wayville, South Australia 5034 Copyright SACE Board of South Australia
More informationUnderstanding Standards
Understanding Standards Support pack for National course assessment C819 75 Design and Manufacture (National 5) assignment Identifier: ABCDEFG/2017 This edition: December 2017 The information in this publication
More informationDragonflies! SculpturePainters A Call to Artists for. Sept. 15, Sept. 30, Oct. 2014
Dragonflies! A Call to Artists for SculpturePainters 2015 Submission Deadline: Sept. 15, 2014 Artist Selection: Sept. 30, 2014 Blanks Delivered to Artists: Oct. 2014 Finished Work Delivered: April 2015
More informationSpecification For. Asset Information Pr8701
Specification For Asset Pr8701 Written Direction Control Document Sponsor Document Owner Subject Matter Expert References Infrastructure Technical Standards Committee Manager, Capital Delivery, SIS Network
More informationMaking a Finished Product from Wood (National 4) level 4 (6 SCQF credit points)
Making a Finished Product from Wood (National 4) SCQF: level 4 (6 SCQF credit points) Unit code: H25Y 74 Unit outline This is the Added Value Unit in the National 4 Practical Woodworking Course. The general
More informationType Approval JANUARY The electronic pdf version of this document found through is the officially binding version
STANDARD FOR CERTIFICATION No. 1.2 Type Approval JANUARY 2013 The electronic pdf version of this document found through http://www.dnv.com is the officially binding version The content of this service
More informationWORLDSKILLS STANDARD SPECIFICATION
WSC2015_WSSS05 WORLDSKILLS STANDARD SPECIFICATION Skill 05 Mechanical Engineering Design - CAD THE WORLDSKILLS STANDARDS SPECIFICATION (WSSS) GENERAL NOTES ON THE WSSS The WSSS specifies the knowledge,
More informationCO-ORDINATION MECHANISMS FOR DIGITISATION POLICIES AND PROGRAMMES:
CO-ORDINATION MECHANISMS FOR DIGITISATION POLICIES AND PROGRAMMES: NATIONAL REPRESENTATIVES GROUP (NRG) SUMMARY REPORT AND CONCLUSIONS OF THE MEETING OF 10 DECEMBER 2002 The third meeting of the NRG was
More informationISO/TC145-IEC/SC3C JWG 11 N 64
ISO/TC145-IEC/SC3C JWG 11 N 64 ISO ORGANISATION INTERNATIONALE DE NORMALISATION INTERNATIONAL ORGANIZATION FOR STANDARDIZATION IEC COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE INTERNATIONAL ELECTROTECHNICAL
More informationChemionix Solutions. Outsourcing. Engineering. Drafting
Chemionix Solutions. Outsourcing. Engineering. Drafting Chemionix Your Outsourcing Partner Companies have been outsourcing since time began. It is only recently that business processes can be outsourced
More informationSýnishorn ISO INTERNATIONAL STANDARD. Leather Tests for colour fastness Colour fastness to water spotting IULTCS IUF 420
INTERNATIONAL STANDARD ISO 15700 IULTCS IUF 420 First edition 1998-05-01 Leather Tests for colour fastness Colour fastness to water spotting Cuir Essais de solidité des teintures Solidité des teintures
More informationISO INTERNATIONAL STANDARD. Rubber Tolerances for products Part 2: Geometrical tolerances
INTERNATIONAL STANDARD ISO 3302-2 First edition 1998-03-15 Rubber Tolerances for products Part 2: Geometrical tolerances Caoutchouc Tolérances pour produits Partie 2: Tolérances géométriques A Reference
More informationIAF MD 10:2013 IAF Mandatory Document for Assessment of CB Management of Competence in Accordance with ISO/IEC 17021:2011
IAF Mandatory Document for Assessment of CB Management of Competence in Accordance with ISO/IEC 17021:2011 4. Table of Contents 1. INTRODUCTION 2. DEFINITIONS 3. GENERAL 4. TECHNICAL AREAS 5. DETERMINATION
More informationCommunication on Progress to the United Nations Global Compact
Communication on Progress to the United Nations Global Compact 2014 PREFACE BY THE CEO The Vaillant Group combines its sustainability activities to form a strategic programme S.E.E.D.S. This involves setting
More informationTape Measure Metal Clippers Screw Bit Set With Extensions
IMPORTANT: Read through instructions thoroughly before beginning to replace any damaged material. Minor damage can be fixed with a fiberglass repair kit and color matched paint. Tools Required Tape Measure
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD ISO First edition
INTERNATIONAL STANDARD ISO 6362-6 First edition 2012-07-01 Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 6: Round, square, rectangular and hexagonal tubes Tolerances
More informationSkillsUSA Wisconsin CABINETMAKING
SkillsUSA Wisconsin CABINETMAKING The following rules are for the Wisconsin state contest only. Students/Teams that qualify for the national contest need to adhere to the rules and guidelines for that
More informationWASSCE / WAEC METALWORK SYLLABUS
WASSCE / WAEC METALWORK SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours. 1. PREAMBLE The
More informationAPPLICANT GUIDE ENGINEERING OCCUPATIONS
ENGINEERING OCCUPATIONS OCCUPATION: Fitter - General (ANZSCO 323211) QUALIFICATION: MEM30205 - Certificate III in Engineering Mechanical Trade SKILLS ASSESSMENT - Occupational Requirements A person who
More informationCustomizing. Variants & Specifications products reflecting your corporate identity
Customizing Variants & Specifications products reflecting your corporate identity Pyramid MiniFlex II LED + 2xUSB metal bezel scale 1:1 328,5 x 88,5 mm Customizing - variants and specifications Customizing
More informationVCE Product Design and Technology: Administrative information for Schoolbased Assessment in 2018
VCE Product Design and Technology: Administrative information for Schoolbased Assessment in 2018 Units 3 and 4 School-assessed Task The School-assessed Task contributes 50 per cent to the study score and
More informationAQA GCSE Design and Technology 8552
AQA GCSE Design and Technology 8552 Investigation, primary and secondary data Unit 6 Designing principles 1 Objectives Understand how primary and secondary data can be collected to assist the understanding
More informationWASSCE / WAEC AUTO BODY REPAIRS AND SPRAY PAINTING SYLLABUS
WASSCE / WAEC AUTO BODY REPAIRS AND SPRAY PAINTING SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you pass the WASSCE in flying
More informationCNC MILLING TECHNOLOGY
The following rules are for the state contest only. Students/Teams that qualify for the national contest need to adhere to the rules and guidelines for that national contest. The rules can be found in
More informationISO INTERNATIONAL STANDARD. Technical drawings General principles of presentation Part 23: Lines on construction drawings
INTERNATIONAL STANDARD ISO 128-23 First edition 1999-06-15 Technical drawings General principles of presentation Part 23: Lines on construction drawings Dessins techniques Principes généraux de représentation
More informationCambridge International Examinations Cambridge International General Certificate of Secondary Education
Cambridge International Examinations Cambridge International General Certificate of Secondary Education *2178900346* DESIGN AND TECHNOLOGY 0445/33 Paper 3 Resistant Materials May/June 2016 1 hour Candidates
More informationFACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK
More informationCONTEST DESCRIPTION / DESCRIPTION DE CONCOURS STEAMFITTER - PIPEFITTER TUYAUTERIE ET MONTAGE DE VAPEUR POST- SECONDARY / NIVEAUX POSTSECONDAIRE
CONTEST DESCRIPTION / DESCRIPTION DE CONCOURS STEAMFITTER - PIPEFITTER TUYAUTERIE ET MONTAGE DE VAPEUR POST- SECONDARY / NIVEAUX POSTSECONDAIRE Table of Contents 1 THE ESSENTIAL SKILLS FOR CAREERS IN THE
More informationWhat is The Collinwood Rain Barrel Project?
Collinwood Rain Barrel Project: Call for Artists To submit this application please include the following: 1) Completed application form including original signatures, 2) Proposed design(s) using the Photo
More informationThe UNISDR Global Science & Technology Advisory Group for the implementation of the Sendai Framework for Disaster Risk Reduction UNISDR
The UNISDR Global Science & Technology Advisory Group for the implementation of the Sendai Framework for Disaster Risk Reduction 2015-2030 UNISDR 1. Background - Terms of Reference - February 2018 The
More informationISO/TC145-IEC/SC3C JWG 11 N 16E
ISO/TC145-IEC/SC3C JWG 11 N 16E ISO ORGANISATION INTERNATIONALE DE NORMALISATION INTERNATIONAL ORGANIZATION FOR STANDARDIZATION IEC COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE INTERNATIONAL ELECTROTECHNICAL
More informationProserv Gender Pay Gap Report 2017
Proserv Gender Pay Gap Report 2017 INTRODUCTION Proserv is the fresh alternative in global energy services. We are a technology-driven company, providing product, services and bespoke solutions to clients
More informationInteroperable systems that are trusted and secure
Government managers have critical needs for models and tools to shape, manage, and evaluate 21st century services. These needs present research opportunties for both information and social scientists,
More information0445 DESIGN AND TECHNOLOGY
CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education MARK SCHEME for the May/June 2014 series 0445 DESIGN AND TECHNOLOGY 0445/33 Paper 3 (Resistant Materials),
More informationREWE Group Detox Program
REWE Group Detox Program Status Report 2015 December 2015 Content 1. Introduction to the Detox Program Objective and Achievements REWE Group s Detox Program - Summary of Achievements The REWE Group Detox
More informationThe 45 Adopted Recommendations under the WIPO Development Agenda
The 45 Adopted Recommendations under the WIPO Development Agenda * Recommendations with an asterisk were identified by the 2007 General Assembly for immediate implementation Cluster A: Technical Assistance
More informationGUIDE 75. Strategic principles for future IEC and ISO standardization in industrial automation. First edition
GUIDE 75 First edition 2006-11 Strategic principles for future IEC and ISO standardization in industrial automation Reference number ISO/IEC GUIDE 75:2006(E) GUIDE 75 First edition 2006-11 Strategic principles
More informationCONSULTANT ACCREDITATION SCHEME WATER SUPPLY
CONSULTANT ACCREDITATION SCHEME WATER SUPPLY DESIGN DRAWING CRITERIA AND CHECKLIST Produced by SA Water Reticulation Networks Jan 2015 Pg. 1 of 8 Jan 2015 Contact Information Details For both water design
More informationCommittee on Development and Intellectual Property (CDIP)
E CDIP/6/4 REV. ORIGINAL: ENGLISH DATE: NOVEMBER 26, 2010 Committee on Development and Intellectual Property (CDIP) Sixth Session Geneva, November 22 to 26, 2010 PROJECT ON INTELLECTUAL PROPERTY AND TECHNOLOGY
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13953 First edition 2001-09-15 Polyethylene (PE) pipes and fittings Determination of the tensile strength and failure mode of test pieces from a butt-fused joint Tubes et raccords
More informationSkills Canada National Competition. Contest Description. 43- Sheet Metal Work / Post-Secondary May 27-30, Saskatoon
Skills Canada National Competition Contest Description 43- Sheet Metal Work / Post-Secondary May 27-30, 2015 - Saskatoon 1. The Importance of Essential Skills for Careers in the Skilled Trades and Technology
More informationAustralia/Taiwan Electronics and ICT Industry Strategic Framework Agreement (ATSFA) Creating New Industries Together
Australia/Taiwan Electronics and ICT Industry Strategic Framework Agreement (ATSFA) Creating New Industries Together In July 2005, the Australian and Taiwan ICT industries agreed to co-operate in the mutual
More informationISO INTERNATIONAL STANDARD. Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3310-1 Fourth edition 2000-07-15 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth Tamis de contrôle Exigences
More information33 rd Indian Engineering Congress
The Institution of Engineers (India) In service of the Nation since 1920 33 rd Indian Engineering Congress December 21-23, 2018, Udaipur Hosted by: Udaipur Local Centre Venue : Udaipur Theme Integration
More informationGENERAL DESCRIPTION OF THE CMC SERVICES
STANDARD FOR CERTIFICATION No.1.1 GENERAL DESCRIPTION OF THE CMC SERVICES MAY 2007 FOREWORD (DNV) is an autonomous and independent foundation with the objectives of safeguarding life, property and the
More informationCambridge International Examinations Cambridge Ordinary Level
Cambridge International Examinations Cambridge Ordinary Level *2686045432* DESIGN AND TECHNOLOGY 6043/01 Paper 1 Technology October/November 2016 Additional Materials: Answer Booklet/Paper Plain paper
More informationAN ROINN OIDEACHAIS AGUS EOLAÍOCHTA THE JUNIOR CERTIFICATE METALWORK SYLLABUS. Contents
AN ROINN OIDEACHAIS AGUS EOLAÍOCHTA THE JUNIOR CERTIFICATE METALWORK SYLLABUS Contents METALWORK...2 TECHNIQUES AND DESIGN...3 MATERIALS AND TECHNOLOGY...5 METALWORK General Aims. The course provides an
More informationUTAH S 2016 WELDING FABRICATION COMPETITION
1 UTAH S 2016 WELDING FABRICATION COMPETITION 2 Contents PROJECT... Error! Bookmark not defined. Team Project Outcomes:... 3 Teams Deliverables:... 3 ESSAY AND DRAWINGS... 3 GENERAL RULES... 4 ORIENTATION...
More informationTERMS AND REGULATIONS FOR PARTICIPATION IN THE EVENT
TERMS AND REGULATIONS FOR PARTICIPATION IN THE EVENT ART. 1 - COMPETITION PURPOSE CANOVA srl presents from June 20 to 24 2018 - to the POP UP SPACE, in 393 Broadway, NYC CANOVA PRIZE. The aim goal of the
More informationInnovation and Collaboration Platform for the Oil and Gas Industry
and Platform for the Oil and Gas Industry Applied intelligence We re doing something new. We ve built an efficient and secure platform to apply innovation intelligence across the oil and gas industry,
More information