Tactile Switch. Ordering Information. A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical, and High-force.

Transcription

1 Tactile Switch A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical, and High-force. A positive click action plus a long life equal to that of a no-contact switch. Radial models (taping specifications) that allow the use of general-purpose radial taping parts insertion machines have been added to the series. Ordering Information 6 x 6 mm Models Type Plunger Height Operating force (OF) Bags (100 Switches) Horizontal (-1000) Flat Projected 4.3 mm 0.98 N {100 gf} N {150 gf} N {260 gf} N {50 gf} (See note.) mm 0.98 N {100 gf} N {150 gf} N {260 gf} N {50 gf} (See note.) mm (7.5-mm pitch) 0.98 N {100 gf} mm 0.98 N {100 gf} (See note.) N {150 gf} (See note.) mm 0.98 N {100 gf} (See note.) N {150 gf} N --- (See note.) 2.55 N {260 gf} (See note.) mm 0.98 N {100 gf} N {150 gf} N {260 gf} N {50 gf} (See note.) --- 8

2 Type Plunger Height Operating force (OF) Bags (100 Switches) Vertical (-3000) Flat Projected 3.15 mm 0.98 N {100 gf} N {150 gf} N {260 gf} mm 0.98 N {100 gf} N {150 gf} N {260 gf} mm 0.98 N {100 gf} N {150 gf} N {260 gf} Note: Switches are sold in units of 100 Switches. Orders must be made in multiples of 100 (the quantity per bag). 12 x 12 mm Models Type Plunger (or LED color) Height Operating force (OF) Bags (100 Switches) Standard (-4000) Long life expectancy (-5000) High reliability gold-plated (-5000) Flat 4.3 mm 1.27 N {130 gf} N {260 gf} Projected 7.3 mm 1.27 N {130 gf} N {260 gf} Flat 4.3 mm 1.27 N {130 gf} Projected 7.3 mm Flat 4.3 mm 1.27 N {130 gf} Projected 7.3 mm Note: Switches are sold in units of 100 Switches. Orders must be made in multiples of 100 (the quantity per bag). 6 x 6 mm Radial Models (Taping Specifications) Type Plunger Height Operating force: 0.98 N {100 gf} Radial models (-6000) Operating force: 1.47 N {150 gf} Flat 4.3 mm mm Projected 7.3 mm Note: Switches are sold in units of 1,000 Switches. Orders must be made in multiples of 1,000. Switches are not sold individually. Accessories (Order Separately) Special Key Tops are available for projected plunger models. See page 39. 9

3 Specifications Ratings/Characteristics Switching capacity 1 to 50 ma, 5 to 24 VDC (resistive load) Ambient temperature 25 C to 70 C (with no icing) Ambient humidity 35% to 85% Contact form SPST-NO Contact resistance 100 m max. (initial value) (rated: 1 ma, 5 VDC) Insulation resistance 100 M min. (at 250 VDC) Dielectric strength 500 VAC, 50/60 Hz for 1 min Bounce time 5 ms max. Vibration resistance Malfunction: 10 to 55 Hz, 1.5 mm double amplitude Shock resistance Destruction: 1,000 m/s 2 {approx. 100G} max. Malfunction: 100 m/s 2 {approx. 10G} max. Life expectancy -1000, -3000, -6000: 1,000,000 operations min (OF: 0.98 N) (-1070: 500,000 operations min) 300,000 operations min (OF: 1.47 N) 100,000 operations min (OF: 2.55 N) 50,000 operations min (OF: 4.9 N) -4000: 3,000,000 operations min (OF: 1.28 N) 1,000,000 operations min (OF: 2.55 N) -5000: 10,000,000 operations min. Weight 6 x 6 mm models: approx g 12 x 12 mm models (standard types): approx g Radial models: approx g Operating Characteristics Item Operating force (OF) Operating force (OF) Releasing force (RF) -1000, -3000, , N 1.47 N 2.55 N 4.9 N 1.27 N 2.55 N -1@@0-3@@0-6@@ N { gf} -1@@2-3@@2-6@@ N { gf} -1@@5-3@@ N { gf} -10@ N { gf} -4@@0-5@@ N { gf} -4@@ N { gf} 0.2 N {20 gf} min N {50 gf} min N {50 gf} min. 0.7 N {70 gf} min N {30 gf} min N {50 gf} min. Pretravel (PT) / 0.1 mm / 0.1 mm Engineering Data Operating Force vs. Stroke (Typical) -1000, -3000, , Operating force (N) OF: 1.47 N Operating force (N) OF: 2.55 N OF: 1.27 N OF: 0.98 N Stroke S (mm) Stroke S (mm) 10

4 Dimensions Note: 1. All units are in millimeters unless otherwise indicated. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. 2. No numbers are indicated on the Switches. The numbers used for s in the following graphics are 3 4 indicated in the Bottom View diagram below. In this diagram, the Switch is rotated so that the s are on the 1 2 right and left-hand sides, and the OMRON logo appears the right way up. (Bottom View) 6 x 6 mm Models Horizontal, Flat Plunger Type -1000, -1002, -1005, (See note.), (See note.), (See note.), (See note.) Horizontal, (with Ground Terminal, Pitch: 6.5 mm) -1100, -1102, (See note.), (See note.) (See note.) Four * * Five, Connections * The height of -1020, -1022, -1025, and is mm. Horizontal, (with Ground Terminal, Pitch: 7.5 mm) * The height of -1120, -1122, and is mm. Horizontal, -1060, ±0.2 6± ±0.1 Four, 1.2±0.05 Connections 7± max. 6.5±0.1 Four, ± ±0.5 (1.8)

5 Horizontal, -1070, N, ±0.2 Horizontal, Projected Plunger Type -1050, , ± ± ±0.1 Four, ±0.1 Four, ± ± max. (1.8) Connections Connections Horizontal, Projected Plunger Type -1150, -1152, Vertical, -3100, -3102, Two, 1.5±0.05 Two, ±0.1 Five, Connections Connections Vertical, (Height: 3.85 mm) -3120, -3122, Two, 1.5±0.05 Vertical, Projected Plunger Type -3150, -3152, Two, 1.5±0.05 Two, Connections ±0.1 Two, Connections 12

6 12 x 12 mm Models -4000, -4005, -5000, Two, 1.8±0.05 (For positioning boss) -4100, -4105, -5100, Two, 1.8±0.05 (For positioning boss) 7.1 Four, 1.2±0.05 Connections 7.1 Five, 1.2±0.05 Connections Projected Plunger Type -4050, -4055, -5050, Two, 1.8±0.05 (For positioning boss) Projected Plunger Type -4150, -4155, -5150, Two, 1.8±0.05 (For positioning boss) ± Four, 1.2± ± Connections Five, 1.2±0.05 Connections 13

7 6 mm 6 mm Radial Types (Taping Specifications): Sold in Units of 1,000 Switches (without Ground Terminal) -6000, Surface A Surface B Support tape Two, 1 0 Note: The tape is random between surface A and surface B , Support tape Three, , ±0.3 6±0.3 Surface A Surface B Support tape 6.35±1 12.7± ± ± ±0.3 Two, 1 0 5±0.1 Note: The tape is random between surface A and surface B. 14

8 -6120, ±0.3 6± ±1 12.7± Three, ±0.1 5±0.1 5 Support tape ± ± ± ± Projected Plunger Type -6050, Surface A Surface B Support tape Two, 1 0 Note: The tape is random between surface A and surface B. Projected Plunger Type -6150, Support tape Three, 1 0 Key Tops B32-series Special Key Tops are available for projected plunger models. Refer to page 40 for details. Precautions Be sure to read the precautions common to all Tactile Switches on pages 5 to 7 for correct use. 15

9 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by Cat. No. A070-E