WLD 231 WELDING PRINT READING
|
|
- Brook Miller
- 5 years ago
- Views:
Transcription
1 WLD 231 WELDING PRINT READING PRESENTED AND APPROVED: APRIL 6, 2012 EFFECTIVE: FALL
2 Prefix & Number WLD 231 Course : Welding Print Reading Purpose of this submission: New X Change/Updated Retire If this is a change, what is being changed? Update Prefix X Course Description (Check all that apply) Course Number X Format Change Credits Prerequisite Competencies Textbook/Reviewed Competencies-no changes needed Does this course require additional fees? X No Yes If so, please explain. Is there a similar course in the course bank? X No Yes (Please identify) Articulation: Is this course or an equivalent offered at other two and four-year universities in Arizona? X No Yes (Identify the college, subject, prefix, number and title: Is this course identified as a Writing Across the Curriculum course? X No Yes Course Textbook, Materials and Equipment Textbook(s) Current edition Author(s) Publisher Print Reading for Welding and Fabrication Kevin Gorgan Prentice Hall ISBN: 13: Barns & Noble Price - $ Software/ Equipment Author(s) Publisher Course Assessments ents Description of Possible Course Assessments (Essays, multiple choice, etc.) Exams standardized for this course? Midterm X Final X Other (Please specify): evaluate and interpret local code/shop drawings Where can faculty members locate or access the required standardized exams for this course? Example: NCK Academic Chair Office Performance task and written examinations Are exams required by the department? No X Yes If Yes, please specify: Written examinations and interpretation of shop drawings Buddy May, B109 Student Outcomes: Identify the general education goals for student learning that is a component of this course. Check all that apply: Method of Assessment
3 1. Communicate effectively. a. Read and comprehend at a college level. b. Write effectively in a college setting. 2. Demonstrate effective quantitative reasoning and X problem solving skills. Successfully passing written examinations and shop/code drawing interpretation. 3. Demonstrate effective qualitative reasoning skills. 4. Apply effective methods of inquiry. a. Generate research paper by gathering information from varied sources, analyzing data and organizing information into a coherent structure. b. Employ the scientific method. 5. Demonstrate sensitivity to diversity a. Experience the creative products of humanity. b. Describe alternate historical, cultural, global perspectives. X Recognition of the non-traditional student, i.e. female students, students with disability. Office of Instruction Use only: CIP Code: ONET Code: Minimum Qualifications:
4 COURSE INFORMATION Initiator: Buddy May Date of proposal to Curriculum Sub-Committee: April 6, 2012 Effective Semester/Year Fall 2012 Spring Summer Course Description will be reflected in the catalog. Prefix & Number: WLD 231 Full : (100 character limit) Print Reading for Welding & Fabrication Short : (30 character limit) Print Reading for Welders Catalog Course Description: Provide the skill and knowledge to students to learn to read and understand drawings that are typically found in the welding and fabrication industry. A strong focus on the interpretation & application of welding symbols is emphasized. SUN Course Number: Credit Hours: 3 Lecture Hours: 3 Lab Hours: Prerequisite(s) Appropriate score on assessment test or successful completion of PCS 021 and TRM 090 Co-requisite(s) Intended Course Goals By the end of the semester, students will be able to: 1. Understand & explain the use of drawings 2. Identify & name the basic weld joints, edge shapes and edge preparations 3. Know welding symbol, weld symbols and interpret them properly. 4. Understand what standards are, i.e. AWS, ASME, ANSI. 5.
5 Course Competencies and Objectives By the end of the semester, students will be able to: Competency 1 Describe and give the purpose of sketching Objective 1.1 Identify basic lines and view Objective 1.2 Perform basic sketching Objective 1.3 Describe additional drawing concepts Competency 2 Describe and identify weld joints and weld types Objective 2.1 Explain the 5 basic classification of weld joints Objective 2.2 Explain joint weld terminology Objective 2.3 Identify and name basic weld types Competency 3 Describe the standard weld symbol and welding symbols Objective 3.1 Understand and explain the types of weld required at the weld joint Objective 3.2 Understand the basic parts of a welding symbol Objective 3.3 Interpret the welding symbol that includes all of the information to fabricate an item Competency 4 Understand standards and why they are required Objective 4.1 Describe standards used in making a drawing Objective 4.2 Define the differences between formal and informal standards Objective 4.3 Competency 5 Understand additional concepts on drawings the fabricator may need to know Objective 5.1 Interpret nondestructive symbols on drawings Objective 5.2 Understand pipe layout and symbols Objective 5.3 Competency 6 Objective 6.1 Objective 6.2 Objective 6.3 Competency 7 Objective 7.1 Objective 7.2 Objective 7.3 Competency 8 Objective 8.1 Objective 8.2 Objective 8.3 Competency 9 Objective 9.1 Objective 9.2 Objective 9.3 Competency 10 Objective 10.1 Objective 10.2 Objective 10.3
ART 151 BASIC BLACK AND WHITE PHOTOGRAPHY
ART 151 BASIC BLACK AND WHITE PHOTOGRAPHY PRESENTED AND APPROVED: AUGUST 9, 2012 EFFECTIVE: FALL 2012-13 Prefix & Number ART 151 Course Title: Basic Black & White Photography Purpose of this submission:
More informationENG 238 WRITING FICTION
ENG 238 WRITING FICTION PRESENTED AND APPROVED: APRIL 6, 2012 EFFECTIVE: FALL 2012-13 Prefix & Number ENG 238 Course Title: Writing Fiction Purpose of this submission: New X Change/Updated Retire If this
More informationBTR 100. Blueprint Reading
BTR 100 Blueprint Reading Approved: December 3, 2010 EFFECTIVE DATE: Fall 2011 COURSE PACKAGE FORM Team Leader and Members Ken Kramer, Frank Port, Curtis Clough, Andra Goldberg Date of proposal to Curriculum
More informationRAD 150 RADIOLOGIC EXPOSURE TECHNIQUE II
RAD 150 RADIOLOGIC EXPOSURE TECHNIQUE II APPROVED 12/O2/2011 EFFECTIVE SPRING 2013-14 Prefix & Number RAD 150 Course Title: Radiologic Exposure Technique II & Lab Purpose of this submission: New Change/Updated
More informationFSC 243. Fire Investigation II. Course Package
1 FSC 243 Fire Investigation II Course Package Presented and Approved May 2, 2008 2 Contact person(s) Michael Messner Date of proposal to 4/18/08 Curriculum Committee NEW COURSE PACKAGE FORM COURSE INFORMATION
More informationROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE. Chester F. Carlson Center for Imaging Science
ROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE Chester F. Carlson Center for Imaging Science NEW COURSE: COS-IMGS-141 - Earth System Dynamics I 1.0 Course Designations and Approvals
More informationROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE. Chester F. Carlson Center for Imaging Science
ROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE Chester F. Carlson Center for Imaging Science REVISED COURSE: COS-IMGS-241 Earth System Dynamics 1.0 Course Designations and Approvals
More informationROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE
ROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE Center for Imaging Science NEW COURSE (COS- IMGS-789): Special Topics: Optical Component, System Design and Performance Evaluation
More informationENGINEERING TECHNOLOGIES ENGINEERING GRAPHICS & DESIGN/DRAFTING Associate in Applied Science: 75 Credit Hours
ENGINEERING TECHNOLOGIES ENGINEERING GRAPHICS & DESIGN/DRAFTING Associate in Applied Science: 75 Credit Hours Prior Learning Assessment Opportunities ETDG 1143 Course Introduction to Design/Drafting ETDG
More informationCOASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) Introduction to Blueprint Reading for Welders
COASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) WLDG 1313: Introduction to Blueprint Reading for Welders Semester Hours: 3 Textbooks: Blueprint Reading For Welders, by A.E. Bennett & Louis J. Siy,
More informationAngelina College Technology and Workforce Division TECHNICAL DRAFTING SYLLABUS DFTG 1405 Instructional Syllabus
Angelina College Technology and Workforce Division TECHNICAL DRAFTING SYLLABUS DFTG 1405 Instructional Syllabus Date approved 8/21/18 Date revised 8/21/18 I. BASIC COURSE INFORMATION A. Course Description:
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationStudent s Signature Completion Date. High School Teacher s Signature Date. Recommended Grade High School. COCC Review Instructor s Signature
2 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now/ Student s Name Student s Signature Completion Date High School Teacher s Signature Date Recommended Grade High School
More informationCOURSE OUTLINE. School of Engineering Technology and Applied Science
COURSE OUTLINE SCHOOL: School of Engineering Technology and Applied Science DEPARTMENT: Information and Communication Engineering Technology (ICET) PROGRAM: Electronics Engineering Technician & Technology
More informationAdministrative Master Syllabus
Purpose: It is the intention of this to provide a general description of the course, outline the required elements of the course and to lay the foundation for course assessment for the improvement of student
More informationROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE. Chester F. Carlson Center for Imaging Science
ROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE Chester F. Carlson Center for Imaging Science NEW COURSE: COS-IMGS-321 Geometric Optics 1.0 Course Designations and Approvals Required
More informationTTC Catalog - Engineering Graphics Technology (EGT)
2018-2019 TTC Catalog - Engineering Graphics Technology (EGT) EGT 001 - EGT 001 Lec: 0 Lab: 0 Credit: * Indicates credit given f engineering graphics course wk transferred from another college f which
More informationROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE. Chester F. Carlson Center for Imaging Science
ROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE Chester F. Carlson Center for Imaging Science NEW COURSE: COS-IMGS-180 Introduction to Computing and Control 1.0 Course Designations
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code ART-005B Course Outline of Record 1. Course Code: ART-005B 2. a. Long Course Title: Intermediate Figure Drawing b. Short Course Title: FIGURE DRAWING, INT 3. a. Catalog
More informationEastern Illinois University New Course Proposal ART 1001, Drawing II
Eastern Illinois University New Course Proposal ART 1001, Drawing II Agenda Item #07-30 Effective Fall 2007 This format is to be used for all courses submitted to the Council on Academic Affairs and/or
More informationIntroduction to AutoCAD
Introduction to AutoCAD Course Design 2005-2006 Course Information Organization Eastern Arizona College Division Industrial Technical Education Course Number DRF 261 Title Introduction to AutoCAD Credits
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code ART-021B Course Outline of Record 1. Course Code: ART-021B 2. a. Long Course Title: Intermediate Watercolor Painting b. Short Course Title: WATERCOLOR PAINT,INT 3. a.
More informationCourse Form Revision
62 Course Form Revision For help filling out the form press F1 or look at the bottom of the screen. For additional instructions, see Course Form Instructions. Type of Action Revision Major revision of
More informationSyllabus Course description
Syllabus Course description Course title Applied Mechanics and Technologies for Energy Efficiency Course code 45531 Scientific sector Ing-Ind/16 and Ing-Ind/13 Degree Master Energy Engineering Semester
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. CIVIL ENGINEERING DRAWING W/LAB CID 2290 (formerly CID 2195)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS CIVIL ENGINEERING DRAWING W/LAB CID 2290 (formerly CID 2195) Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Fall 08 Catalog
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code ART-005C Course Outline of Record 1. Course Code: ART-005C 2. a. Long Course Title: Advanced Figure Drawing b. Short Course Title: FIGURE DRAWING, ADV 3. a. Catalog Course
More informationOwensboro Community & Technical College Approved Discover College Concurrent Enrollment Program Course List
Owensboro Community & Technical College Approved Discover College Concurrent Enrollment Program Course List 2013-2014 Courses below are subject to availability at each partner high school, based on teacher
More informationEELE 201 Circuits I. Fall 2013 (4 Credits)
EELE 201 Circuits I Instructor: Fall 2013 (4 Credits) Jim Becker 535 Cobleigh Hall 994-5988 Office hours: Monday 2:30-3:30 pm and Wednesday 3:30-4:30 pm or by appointment EMAIL: For EELE 201-related questions,
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code ART-019 Course Outline of Record 1. Course Code: ART-019 2. a. Long Course Title: Introduction To Painting b. Short Course Title: PAINTING, INTRO 3. a. Catalog Course
More informationCOURSE TOPICS: The following topics will be covered this semester:
ETME 203 Mechanical Design Graphics Spring 2012 rev. 12-16-2011 LEC / REC 001 W, F 10:00 11:50 EPS 134 LEC / LAB 002 T, Th 4:10 6:00 EPS 129 Instructor: Keith Fisher Office: Roberts Hall 201A Phone: 994-6288
More information1 of 6. IT 1303 ENGINEERING DRAWING Fall Instructor. Phone:
IT 1303 ENGINEERING DRAWING Fall 2017 Instructor Mr. Scott Wassermann Office: IT 101 Phone: 837-8137 email: jwassermann@sulross.edu Office Hours: by appointment Time and Location Class: TR 12:30-3:15 pm
More informationAdvanced study of theatrical painting techniques. Lab and production work required. (3)
COURSE APPROVAL DOCUMENT Southeast Missouri State University Department: The Conservatory of Theatre and Dance Course No. TH 481 Title of Course: Scene Painting II Date: 09/27/16 I. Catalog Description:
More informationWashtenaw Community College Comprehensive Report. PHO 204 Color Photo Design Effective Term: Winter Course Cover. Textbook and software
Washtenaw Community College Comprehensive Report PHO 204 Color Photo Design Effective Term: Winter 2018 Course Cover o Division: Business and Computer Technologies o Department: Digital Media Arts o Discipline:
More informationIntroduction to Blueprint for Welders-1313 Course Syllabus: Spring 2015
Introduction to Blueprint for Welders-1313 Course Syllabus: Spring 2015 Northeast Texas Community College exists to provide responsible, exemplary learning opportunities. Marcos Sánchez Office: VT: 102
More informationUniversity of Engineering and Technology, Taxila Department of Civil Engineering
Course Instructor: Engr. Syed Saqib Mehboob University of Engineering and Technology, Taxila Department of Civil Engineering Course Title: Pre-requisite(s): Construction, Planning & Management (CE-304)
More informationCOWLEY COLLEGE & Area Vocational Technical School
COWLEY COLLEGE & Area Vocational Technical School COURSE PROCEDURE FOR INTRO TO SCREENWRITING ENG2264-3 Credit Hours Student Level: This course is open to students on the college level in either the freshman
More informationEASTERN ARIZONA COLLEGE Upholstery
EASTERN ARIZONA COLLEGE Upholstery Course Design 2017-2018 Course Information Division Industrial Technology Education Course Number IAR 110 Title Upholstery Credits 2-3 Developed by Shirley Moore/Revised
More informationElizabethtown Area School District
Photography Course Number: 840 Grade Level: 10-12 Length of Course: 1 Semester Total Clock Hours: Length of Period: 80 minutes Date Written: 04-05 Periods per Week/Cycle: 5 Written By: Kevin Goss Credits
More informationBeginning Scrapbooking I
Course Information Organization: Division: Course Number: Title: Credits: 2 Developed by: Lecture/Lab Ratio: Transfer Status: Extended Registration Class: Beginning Scrapbooking I Course Design 2000-2001
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code DRA-001 Course Outline of Record 1. Course Code: DRA-001 2. a. Long Course Title: Technical Drafting I b. Short Course Title: TECHNICAL DRAFTING I 3. a. Catalog Course
More informationITT Technical Institute. CD111 Introduction to Design and Drafting Onsite and Online Course SYLLABUS
ITT Technical Institute CD111 Introduction to Design and Drafting Onsite and Online Course SYLLABUS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or
More informationPrinciples of Communication Systems
Principles of Communication Systems Course code: EEE351 (3+1) Prerequisites: EEE223 - Signal and Systems Co requisites: - Course Catalog Description: Introduction to communication systems: Fundamental
More informationBeginning Scrapbooking II
Beginning Scrapbooking II Course Design 2003-2004 Course Information Organization: Division: EASTERN ARIZONA COLLEGE Fine Arts Course Number: ART 154 Title: Credits: 1 Developed by: Lecture/Lab Ratio:
More informationITT Technical Institute. DT1110 Introduction to Drafting and Design Technology Onsite and Online Course SYLLABUS
ITT Technical Institute DT1110 Introduction to Drafting and Design Technology Onsite and Online Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s)
More informationAcademic Course Description
BME 0 JIGS FIXTURES AND PRESS TOOLS Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME 0-JIGS FIXTURES AND PRESS TOOLS Seventh
More informationMachine Woodworking. Course Design Machine Woodworking
Machine Woodworking Course Design 2002-2003 Course Information Organization: Division: Eastern Arizona College ITE Course Number: IAR 120 Title: Credits: 2 Developed by: Lecture/Lab Ratio: Transfer Status:
More informationINTD-1100: HAND DRAFTING AND SKETCHING FOR INTERIORS
INTD-1100: Hand Drafting and Sketching for Interiors 1 INTD-1100: HAND DRAFTING AND SKETCHING FOR INTERIORS Cuyahoga Community College Viewing:INTD-1100 : Hand Drafting and Sketching for Interiors Board
More informationNORTH CAROLINA STATE UNIVERSITY GRADUATE COURSE ACTION FORM
NORTH CAROLINA STATE UNIVERSITY GRADUATE COURSE ACTION FORM NOTE: Click once on shaded fields to type data. To check boxes, right click at box, click Properties, and click Checked under Default Values.
More informationAcademic Course Description. BEE 303 ELECTRON DEVICES Third Semester (Odd Semester)
BEE 303- Electron Devices Academic Course Description Course (catalog) description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE 303
More informationEASTERN ARIZONA COLLEGE Machine Woodworking
EASTERN ARIZONA COLLEGE Machine Woodworking Course Design 2018-2019 Course Information Division Industrial Technology Education Course Number IAR 120 Title Machine Woodworking Credits 2-3 Developed by
More informationEASTERN ARIZONA COLLEGE Advanced Manufacturing Production Processes
EASTERN ARIZONA COLLEGE Advanced Manufacturing Production Processes Course Design 2015-2016 Course Information Division Industrial Technology Education Course Number AMT 240 Title Advanced Manufacturing
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO Sault College COURSE OUTLINE COURSE TITLE: Fabrication and Welding CODE NO. : SEMESTER: 3 rd PROGRAM: AUTHOR: Mechanical Techniques
More informationEASTERN ARIZONA COLLEGE Beginning Ceramics I
EASTERN ARIZONA COLLEGE Beginning Ceramics I Course Design 2016-2017 Course Information Division Fine Arts Course Number ART 161 Title Beginning Ceramics I Credits 1-3 Developed by Sandee Payne Lecture/Lab
More informationIntermediate Scrapbooking I
Intermediate Scrapbooking I Course Design 2003-2004 Course Information Organization: Division: EASTERN ARIZONA COLLEGE Fine Arts Course Number: ART 253 Title: Credits: 1 Developed by: Lecture/Lab Ratio:
More informationSTATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: _INT 134 (2006-1) Instruction version number (e.g.; INT 100 (2007-1)). Identifier is the postsecondary
More informationICOM - Introduction to Communications
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 230 - ETSETB - Barcelona School of Telecommunications Engineering 739 - TSC - Department of Signal Theory and Communications
More informationModel 2.4 Faculty member + student
Model 2.4 Faculty member + student Course syllabus for human computer CS351D 1. Faculty member information: Name of faculty member responsible for the course Dr. Kahkashan Tabassum Office Hours Office
More informationEASTERN ARIZONA COLLEGE Drawing/The Creative Process
EASTERN ARIZONA COLLEGE Drawing/The Creative Process Course Design 2016-2017 Course Information Division Fine Arts Course Number ART 111B Title Drawing/The Creative Process Credits 2 Developed by Kenny
More informationNortheast Alabama Community College
Student Attainment of General Education and Program Learning Outcomes Learning Outcomes Summary Report: 2016-2017 Academic Year Written Communication Students will demonstrate adequate writing skills by
More informationAcademic Course Description
BEC503 TRANSMISSION LINES, NETWORKS AND WAVEGUIDES Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electronics and Communication Engineering BEC503TRANSMISSION
More informationCM 21 Construction Graphics Course Syllabus Fall Instructor: Professor Keith Bisharat
CM 21 Construction Graphics Course Syllabus Fall 2008 Instructor: Professor Keith Bisharat Lecture: Tuesdays and Thursdays 8:00 AM 8:50 AM 208 Brighton Hall Lab 1: Tuesday 9-11:50 AM Lab 2: Thursday 9-11:50
More informationART DEPARTMENT HIGH SCHOOL VISUAL ART PATHWAYS 3-D STUDIO (CERAMICS/SCULPTURE) 1 Studio 1 Ceramics/Sculpture 1 Digital 1 Photography 1
ART DEPARTMENT HIGH SCHOOL VISUAL ART PATHWAYS LEVEL 2-D STUDIO (DRAWING/PAINTING) 3-D STUDIO (CERAMICS/SCULPTURE) DIGITAL PHOTOGRAPHY 1 Studio 1 Ceramics/Sculpture 1 Digital 1 Photography 1 2 Studio 2
More informationDo not copy BME Abbreviated Course Title (19 spaces or less): Design of Biomedical Systems and Devices
without the express written consent of the instructor. Department of Biomedical Engineering Course Title: Design of Biomedical Systems & Devices Instructors: Michael Christie/ Hamid Shahrestani Required
More informationAcademic Course Description. BHARATH University Faculty of Engineering and Technology Department of Electrical and Electronics Engineering
BEE101- Basic Electrical and Electronics Engineering Academic Course Description BHARATH University Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE101 Basic
More informationPrerequisite(s): None
Digital Photography Art-137-81 3 Credit Hours, Tuesday, 6:00pm 8:54pm WINTER 2018 Jackson College LeTarte Center-Hillsdale, Rm. 15 Ellen Permoda (517) 914-4759 permodaellenh@jccmi.edu Office Hours: Before
More informationBlueprint Reading
Western Technical College 31420302 Blueprint Reading Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 Introduction to ready
More informationAcademic Course Description. BEC701 Fiber Optic Communication Seventh Semester, (Odd Semester)
BEC701 Fiber Optic Communication Academic Course Description BHARATH University Faculty of Engineering and Technology Department of Electronics and Communication Engineering BEC701 Fiber Optic Communication
More informationITT Technical Institute. CD121 Drafting/CAD Methods Onsite and Online Course SYLLABUS
ITT Technical Institute CD121 Drafting/CAD Methods Onsite and Online Course SYLLABUS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or Corequisite(s):
More informationNortheast Alabama Community College
Student Attainment of General Education and Program Learning Outcomes Learning Outcomes Summary Report: 2015-2016 Academic Year Written Communication Students will demonstrate adequate writing skills by
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305 Class Hours: 3 Credit Hours: 4 Laboratory Hours: 3 Date Revised: Spring 2011 NOTE: This course is designed
More informationAP Studio Art: Drawing Portfolio 2-D Design Portfolio 3-D Design Portfolio
AP Studio Art: Drawing Portfolio 2-D Design Portfolio 3-D Design Portfolio Course Description The AP Studio Art course gives highly motivated high school students the opportunity to do college level artwork.
More informationCOURSE OUTLINE. School of Engineering Technology and Applied Science. Applied Biological and Environmental Science (ABES)
COURSE OUTLINE SCHOOL: School of Engineering Technology and Applied Science DEPARTMENT: Applied Biological and Environmental Science (ABES) PROGRAM: Architectural Technology COURSE TITLE: Architectural
More information1 of 6. IT 1303 ENGINEERING DRAWING Summer Instructor. Phone:
IT 1303 ENGINEERING DRAWING Summer 1 2018 Instructor Mr. Terrence Ross Office: IT 101 Phone: 837-8137 email: tross@sulross.edu Office Hours: by appointment Time and Location Class: MTWRF 9:50-11:25 am
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationDFTG Blueprint Reading and Sketching
Course Syllabus DFTG 1325 - Blueprint Reading and Sketching Catalog Description: An introduction to reading and interpreting working drawings for fabrication processes and associated trades. Use of sketching
More informationBig Sandy Community and Technical College. Course Syllabus
Big Sandy Community and Technical College Course Syllabus PS Number: 81212 Semester: Spring Year: 2017 Faculty Name: Charles K. Moore Title: Associate Professor Course Prefix and Number: IMT-116 Course
More informationSan José State University Aerospace Engineering AE20 Computer-Aided Design for Aerospace Engineers, Fa
San José State University Aerospace Engineering AE20 Computer-Aided Design for Aerospace Engineers, Fa11 2017 Instructor: Office Location: Robert Benzio E407 Telephone: (408) 203-0457 Email: Office Hours:
More informationCOLLEGE OF IMAGING ARTS AND SCIENCES. Art History
368 ROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF IMAGING ARTS AND SCIENCES Art History REVISED COURSE: CIAS-ARTH-368-20 th CenturyArt1900-1950 10/15 prerequisite chg ARTH-136 corrected
More informationComputer-Aided Drafting and Design Technology, A.A.S.
Johnson County Community College 1 Computer-Aided Drafting and Design Technology, A.A.S. Drafting technicians are engineering communication specialists who apply mathematics, computer applications and
More information405) Prerequisit. cies. ncluding size. 3. Create a set of. c5-3,c6-3,c7-33 ,C7-3 SCANS:C5-3, interviews. research, the.
Technical Drafting (DFTG-14 405) Credit: 4 semester credit hours (3 hours lecture, 4 hours lab) Prerequisit te/co-requisite: None Course Description Introduction to the principles of drafting to include
More informationArchitectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab)
Architectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: 1. 1310 Microstation (required) 2. Knowledge of basic computer operations and
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104) Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 3.0 Revised: Spring
More informationFraming Tech 1
Western Technical College 31410366 Framing Tech 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3.00 Total Hours 108.00 This course introduces the
More informationVerizon Next Step Program Course Outline. Telecommunications Technology: Verizon
Verizon Next Step Program Course Outline Course Title: Curriculum: ELECTRICAL CIRCUITS Telecommunications Technology: Verizon Credit Hours: 4 Contact Hours: 5 Date of Revision: 6/7-9/04 Valid for F 04
More informationNORTH CAROLINA STATE UNIVERSITY GRADUATE COURSE ACTION FORM
NORTH CAROLINA STATE UNIVERSITY GRADUATE COURSE ACTION FORM NOTE: Click once on shaded fields to type data. To check boxes, right click at box, click Properties, and click Checked under Default Values.
More informationAcademic Course Description
BSS601 Value Education and Professional Ethics Academic Course Description BHARATH University Faculty of Engineering and Technology Department of Electronics and Communication Engineering BSS601 VALUE
More informationWashtenaw Community College Comprehensive Report. PHO 216 Environmental Portraiture Effective Term: Fall 2011
Washtenaw Community College Comprehensive Report PHO 216 Environmental Portraiture Effective Term: Fall 2011 Course Cover Division: Business and Computer Technologies Department: Digital Media Arts Discipline:
More informationWoodworking. Course Design Bill Karlinsey and Larry Woodside 1 hour lecture, 3 hours lab per week
Woodworking Course Design 2001-2002 Course Information Organization: Division: Eastern Arizona College ITE Course Number: IAR 101 Title: Credits: 2 Developed by: Lecture/Lab Ratio: Woodworking Transfer
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ENGINEERING DRAWING W/LAB CID 1105
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ENGINEERING DRAWING W/LAB CID 1105 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Spring 05 Catalog Course Description:
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code ART-025A Course Outline of Record 1. Course Code: ART-025A 2. a. Long Course Title: Beginning Acrylic Painting b. Short Course Title: ACRYLIC PAINTING,BEG 3. a. Catalog
More informationAcademic Course Description. BEC702 Digital CMOS VLSI
BEC702 Digital CMOS VLSI Academic Course Description Course (catalog) description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electronics and Communication Engineering CMOS is
More informationGUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: FABRICATION TECHNOLOGY-II (Code: 3345505) Diploma Programme in which this course is offered Semester in which offered
More informationPAINTING AND PRINTMAKING, BACHELOR OF FINE ARTS (B.F.A.)
Painting and Printmaking, Bachelor of Fine Arts (B.F.A.) 1 PAINTING AND PRINTMAKING, BACHELOR OF FINE ARTS (B.F.A.) Faculty and students in the Department of Painting and Printmaking work together in a
More informationCOURSE INFORMATION COURSE PREFIX/NO.: RAD 121 LEC HRS/WK: 4.0 LAB HRS/WK: 0.0 CREDIT HRS/SEMESTER: 4.0
COURSE INFORMATION COURSE PREFIX/NO.: RAD 121 COURSE TITLE: RADIOGRAPHIC PHYSICS LEC HRS/WK: 4.0 LAB HRS/WK: 0.0 CREDIT HRS/SEMESTER: 4.0 Distance Learning Attendance/VA Statement Textbook Information
More informationBCN 1251C Construction Drawing Section: Credits Spring 2016
BCN 1251C Construction Drawing Section: 5889 3 Credits Spring 2016 Meeting Location: RNK210 Meeting Time: T, R 8-9 Periods Instructor: Yuanxin 'Alex' Zhang Logan K. To Ph.D. Candidate Office: RNK324 Office:
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. ARCHITECTURAL 3D MODELING W/LAB CID 2112 (formerly CID 2115)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ARCHITECTURAL 3D MODELING W/LAB CID 2112 (formerly CID 2115) Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 0.0 Revised: Fall 08 Catalog
More informationC E R R I T O S C O L L E G E. Norwalk, California COURSE OUTLINE ENGLISH 234 READINGS IN SHORT FICTION
C E R R I T O S C O L L E G E Norwalk, California COURSE OUTLINE ENGLISH 234 READINGS IN SHORT Approved by the Curriculum Committee on: September 25, 2003 Dr. Steve Clifford Joana Mootz-Gonzales Lynn Serwin
More informationSubject Description Form
Subject Description Form Subject Code Subject Title Credit Value BRE222 Workshop Practices and Draftsmanship 3 Academic Credits Level 2 Pre-requisite/ Co-requisite/ Exclusion Objectives Nil 1) Provide
More informationPAINTING AND PRINTMAKING, BACHELOR OF FINE ARTS (B.F.A.) [VCUQ]
Painting and Printmaking, Bachelor of Fine Arts (B.F.A.) [VCUQ] 1 PAINTING AND PRINTMAKING, BACHELOR OF FINE ARTS (B.F.A.) [VCUQ] Learning outcomes Upon completing this program, students will know and
More informationRICHLAND COLLEGE. School of Engineering Technology. COURSE SYLLABUS CETT 1405 AC Circuits. Fall 2018
RICHLAND COLLEGE School of Engineering Technology COURSE SYLLABUS CETT 1405 AC Circuits Fall 2018 Richland College is determined to prepare the student with the knowledge and skills you need to succeed
More information