R75. MKP Series HIGH PERFORMANCES R /2008
|
|
|
- Norah Hubbard
- 5 years ago
- Views:
Transcription
1 Loose Taped Fig. 1 Fig. 2 Fig. 3 R75 Typical applications: deflection circuits in TV-sets and monitors (S-correction), resonant capacitor in electronic ballast and compact lamp, power factor correction and coupling capacitor in SMPS, timing and oscillator circuits. Ød±0.05 p=7.5 p=10 15 p 27.5 p = All dimensions are in mm. Product code system The part number, comprising 14 digits, is formed as follows: R Digit 1 to 3 Series code. Digit 4 d.c. rated voltage: G = 160V I = 250V M= 400V P = 630V Q = 1000V R= 1250V T = 1600V U = 2000V Digit 5 Pitch: D = 7.5 mm; F = 10.0mm; I = 15.0mm; N = 22.5 mm; R = 27.5mm; W = 37.5mm Digit 6 to 9 Digits indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pf. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics (0 to 9). Digit 13. Digit 14 Capacitance tolerance: J=5%; K=10%; M=20% Pitch Box thickness Maximum dimensions (mm) (mm) (mm) B max H max L max 7.5 All B +0.1 H +0.1 L All B +0.2 H +0.1 L <7.5 B +0.2 H +0.1 L B +0.2 H +0.1 L All B +0.2 H +0.1 L All B +0.2 H +0.1 L All B +0.3 H +0.1 L +0.3 GENERAL TECHNICAL DAta Dielectric:. Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: for Ø 0,6mm : tinned wire for Ø = 0,5mm : tinned wire, low thermical conductivity Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: manufacturer s logo, series (R75), dielectric code (MKP), capacitance, tolerance, D.C. rated voltage, manufacturing date code. Climatic category: 55/105/56 IEC Operating temperature range: -55 to +105 C Related documents: IEC Table 1 (for more detailed information, please refer to pages 14). Standard packaging style Lead length Taping style Ordering code P 2 Fig. Pitch (mm) (mm) (No.) (mm) (Digit 10 to 11) AMMO-PACK DQ AMMO-PACK /15.0 DQ AMMO-PACK DQ REEL Ø 355mm CK REEL Ø 355mm /15.0 GY REEL Ø 500mm /15.0 CK REEL Ø 500mm /27.5 CK Loose, short leads AA Loose, long leads (p<10mm) 17 +1/-2 Z3 Loose, long leads (p10mm) 18 +1/-1 JM Loose, long leads (p 15mm) / Note: Ammo-pack is the preferred packaging for taped version /2008
2 Rated 160Vdc / 70Vac Max Cap. Reduced sizes dv/dt 0.10 µf E3 R75GD B µf E3 R75GD B µf E3 R75GD B µf E3 R75GD A µf E3 R75GD A µf E3 R75GF A µf E3 R75GF A µf E3 R75GF A µf E3 R75GF A µf E3 R75GF A µf E3 R75GF A-- single sided metallized 1 section (160Vdc) The derating curves of previous table are not included this catalogue, available upon request. Rated 160Vdc / 90Vac Max B H L p (V/µs) (V 2 µs) µf E3 R75GD µf E3 R75GD µf E3 R75GD µf E3 R75GD µf E3 R75GD µf E3 R75GD µf E3 R75GF µf E3 R75GF µf E3 R75GF µf E3 R75GF µf E3 R75GF µf E3 R75GF µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI µf E3 R75GI Rated 160Vdc / 90Vac Max 0.82 µf E3 R75GN µf E3 R75GN µf E3 R75GN µf E3 R75GN µf E3 R75GN µf E3 R75GR µf E3 R75GR µf E6 R75GR µf E3 R75GR µf E3 R75GR µf E3 R75GR µf E3 R75GR µf E3 R75GR µf E3 R75GR µf E3 R75GR µf E3 R75GR µf E3 R75GR µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW µf E3 R75GW Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 09/
3 Rated 250Vdc / 140Vac Max Cap. Reduced sizes dv/dt µf E3 R75ID B µf E3 R75ID B µf E3 R75ID B µf E3 R75ID B µf E3 R75ID A µf E3 R75ID A µf E3 R75IF A µf E3 R75IF A µf E3 R75IF A µf E3 R75IF A µf E3 R75IF A µf E3 R75IF A-- The derating curves of previous table are not included this catalogue, available upon request. Rated 250Vdc / 160Vac Max µf E3 R75ID µf E3 R75ID µf E3 R75ID µf E3 R75ID µf E3 R75ID µf E3 R75ID µf E3 R75ID µf E3 R75ID µf E3 R75ID µf E3 R75IF µf E3 R75IF µf E3 R75IF µf E3 R75IF µf E3 R75IF µf E3 R75IF µf E3 R75IF µf E3 R75IF µf E3 R75IF µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II µf E3 R75II R75 single sided metallized 1 section (250Vdc) Rated 250Vdc / 160Vac Max 0.39 µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IN µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IR µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW µf E3 R75IW Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values /2008
4 Rated 400Vdc / 200Vac Max Cap. Reduced sizes dv/dt µf E3 R75MD B µf E3 R75MD B µf E3 R75MD B µf E3 R75MD B µf E3 R75MD A µf E3 R75MD A-- single sided metallized 1 section (400Vdc) The derating curves of previous table are not included this catalogue, available upon request. Rated 400Vdc / 220Vac* Max µf E3 R75MD µf E3 R75MD µf E3 R75MD µf E3 R75MD µf E3 R75MD µf E3 R75MD µf E3 R75MD µf E3 R75MD µf E3 R75MD µf E3 R75ΜF µf E3 R75ΜF µf E3 R75ΜF µf E3 R75ΜF µf E3 R75ΜF µf E3 R75ΜF µf E3 R75ΜF µf E3 R75ΜF µf E3 R75ΜF µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI µf E3 R75MI Rated Cap. 400Vdc / 220Vac* Std dimensions Max dv/dt 0.18 µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MN µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MR µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW µf E3 R75MW Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 151) 09/
5 Rated 630Vdc / 220Vac* Max Cap. Reduced sizes dv/dt µf E3 R75PD2100--B µf E3 R75PD2120--B µf E3 R75PD2150--B µf E3 R75PD2180--B µf E3 R75PD2220--A µf E3 R75PD2270--A-- single sided metallized 1 section (630Vdc) The derating curves of previous table are not included this catalogue, available upon request. Rated 630Vdc / 250Vac* Max 1000 pf E3 R75PD pf E3 R75PD pf E3 R75PD pf E3 R75PD pf E3 R75PD pf E3 R75PD pf E3 R75PD pf E3 R75PD pf E3 R75PD pf E3 R75PD pf E3 R75PD pf E3 R75PD µf E3 R75PD µf E3 R75PD µf E3 R75PD µf E3 R75PD pf E3 R75PF pf E3 R75PF pf E3 R75PF pf E3 R75PF pf E3 R75PF pf E3 R75PF pf E3 R75PF pf E3 R75PF pf E3 R75PF pf E3 R75PF pf E3 R75PF pf E3 R75PF µf E3 R75PF µf E3 R75PF µf E3 R75PF µf E3 R75PF µf E3 R75PF µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI µf E3 R75PI Rated 630Vdc / 250Vac* Max µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PN µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PR µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW µf E3 R75PW Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 151) /2008
6 single sided metallized R75 single sided metallized 1 section (1000Vdc/250Vac) Rated 1000Vdc / 250Vac* Max B H L p (V/µs) (V 2 µs) µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QI µf E3 R75QN µf E3 R75QN µf E3 R75QN µf E3 R75QN µf E3 R75QN µf E3 R75QN µf E3 R75QN µf E3 R75QN µf E3 R75QN µf E3 R75QR µf E4 R75QR µf E4 R75QR µf E3 R75QR µf E3 R75QR µf E3 R75QR µf E3 R75QR µf E3 R75QR µf E3 R75QR µf E3 R75QR µf E3 R75QR µf E4 R75QR µf E3 R75QR µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW µf E3 R75QW sections (1000Vdc/400Vac) Rated 1000Vdc / 400Vac Max 220 pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD pf E6 R75QD Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R depends on the voltage waveform and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. Note: * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 151) 09/
7 single sided metallized R75 MEtallized polypropylene film capacitor D.C. AND PULSE APPLICATIONS 3 sections (1250Vdc)-(1600Vdc) Rated 1250Vdc / 600Vac Max 8200 pf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RI µf E4 R75RN µf E4 R75RN µf E4 R75RN µf E4 R75RN µf E4 R75RN µf E4 R75RN µf E4 R75RN µf E4 R75RN µf E4 R75RN µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RR µf E4 R75RW µf E4 R75RW µf E4 R75RW µf E4 R75RW µf E4 R75RW µf E4 R75RW µf E4 R75RW µf E4 R75RW µf E4 R75RW µf E4 R75RW µf E4 R75RW µf E4 R75RW Rated 1600Vdc / 650Vac Max 3900 pf E4 R75TI pf E4 R75TI pf E4 R75TI pf E4 R75TI pf E4 R75TI µf E4 R75TI µf E4 R75TI µf E4 R75TI µf E4 R75TI µf E4 R75TI µf E4 R75TI µf E4 R75TI µf E4 R75TI µf E4 R75TI µf E4 R75TN µf E4 R75TN µf E4 R75TN µf E4 R75TN µf E4 R75TN µf E4 R75TN µf E4 R75TN µf E4 R75TN µf E4 R75TN µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TR µf E4 R75TW µf E4 R75TW µf E4 R75TW µf E4 R75TW µf E4 R75TW µf E4 R75TW µf E4 R75TW µf E4 R75TW µf E4 R75TW µf E4 R75TW µf E4 R75TW µf E4 R75TW Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values /2008
8 Rated 2000Vdc / 700Vac Max 1000 pf E4 R75UI pf E4 R75UI pf E4 R75UI pf E4 R75UI pf E4 R75UI pf E4 R75UI pf E4 R75UI pf E4 R75UI pf E4 R75UI pf E4 R75UI pf E4 R75UI pf E4 R75UI µf E4 R75UI µf E4 R75UI µf E4 R75UI µf E4 R75UI µf E4 R75UI µf E4 R75UI µf E4 R75UI µf E4 R75UI µf E4 R75UI pf E4 R75UN pf E4 R75UN pf E4 R75UN pf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UN µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UR µf E4 R75UW µf E4 R75UW µf E4 R75UW µf E4 R75UW µf E4 R75UW µf E4 R75UW µf E4 R75UW µf E4 R75UW µf E4 R75UW µf E4 R75UW µf E4 R75UW single sided metallized 3 sections (2000Vdc) Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 09/
9 electrical characteristics Rated voltage (V R ): 160Vdc - 250Vdc - 400Vdc - 630Vdc -1000Vdc for 1 section. 1250Vdc Vdc Vdc for 3 sections. Rated temperature (T R ): +85 C Temperature derated voltage: The following decreasing factor has to be applied on the rated voltage: +85 C to +105 C: 2.00% per C for V R (d.c.) +85 C to +105 C: 1.25% per C for V R (a.c.) Capacitance range: 1000 pf to 33µF for 1 section pf to 2.2µF for 3 sections. Capacitance values: E12 series (IEC Norm). Capacitance tolerances (measured at 1 khz): ±5% (J); ±10% (K); ±20% (M). Total self-inductance (L): (Lead length ~2 mm) Pitch (mm) L (nh) Dissipation factor (DF): tgδx10-4 at +25 C±5 C khz C 0.1µF 0.1<C 1.0µF 1<C 4.7µF C>4.7µF Insulation resistance: Test conditions Temperature: +25±C 5 C Voltage charge time: 1min Voltage charge: 100Vdc Performance 1x10 5 MΩ for C 0.33µF (5x10 5 MΩ)* s for C >0.33µF ( s)* * Typical value. Test voltage between terminations: 1.6xV R applied for 2 s at +25 C±5 C 10 test method and performance Damp heat, steady state: Test conditions Temperature: +40 C±2 C Relative humidity (RH): 93% ±2% Test duration: 56 days Performance Capacitance change C/C : 2% DF change ( tgδ): 10x10-4 at 1kHz Insulation resistance: 50% of initial limit. Endurance: Test conditions Temperature: +85 C±2 C Test duration: 2000 h Voltage applied: 1.25xV R Performance Capacitance change C/C : 3% DF change ( tgδ): 10x10-4 at 10kHz for C 1µF 10x10-4 at 01kHz for C>1µF Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260 C±5 C Dipping time (with heat screen):10 s±1 s Performance Capacitance change C/C : 1% DF change ( tgδ): 10x10-4 at 10kHz for C 1µF 10x10-4 at 01kHz for C>1µF Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (see page 12) Performance Capacitance change C/C : 0.5% /2008
10 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40 C) Note: p (pitch) in mm. 09/
11 metallized polypropylene film capacitor MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40 C) Note: p (pitch) in mm. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute and we specifically disclaim any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
12 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kemet: R75GN4100AA00J R75PF2330AAM0K R75PN3330DQ30K
R76. MMKP Series R 7 6 -
Loose Taped p = 7.5 p =10 15 p 27.5 p = 37.5 B 3,5 >3,5 all all all Ød±0.05 0.5 0.6 0.6 0.8 1.0 Product code system The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11
R60. MKT Series R S WOUND technology from pitch 10 to 27.5mm (Rated Voltage from 63 to 1000Vdc)
Loose Taped Fig. Fig.2 R6 Typical application: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.:automotive) PRODUCT CODE: R6 p= p > d.5.6.8 All dimensions
Not for new design. Use new F611-F612 Series.
Loose All dimensions are in mm. Not for new design. Use new F611-F612 Series. Taped Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications
General Purpose, Pulse and DC Transient Suppression R76 Series Double Metallized Polypropylene Film/Foil, Radial. Applications
General Purpose, Pulse and DC Transient Suppression R76 Series Double Metallized Polypropylene Film/Foil, Radial Overview The R76 Series is a polypropylene dielectric with doublemetallized polyester film
Polypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications
Polypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications Overview The R79 Series is constructed of metallized
Applications R74 5 F 1100 AA H0 J
Polypropylene Pulse/High Frequency Capacitors R74 125 C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 125 C is constructed of metallized polypropylene
Applications RSB D C 3100 AA 00 J. Capacitance Code (pf) digits represent significant figures. First digit specifies the number of zeros to be added.
General Purpose Metallized Polyester Film Capacitors RSB Series, 5 mm Lead Spacing, 50 630 VDC (Automotive Grade) Overview The RSB Series is constructed of metallized polyester film (stacked technology)
Type 167/184 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion
Radial Box Metallized Polyester Capacitors for Automatic Insertion Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation
Metallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: B32671... B32672 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures
Type 160 Metallized Polyester Radial Lead Capacitors
Type 160 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors Specifcations Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric
Polypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications
Polypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications Overview The R79 Series is constructed of metallized
Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
AC Line EMI Suppression and RC Networks P409 Series, Integrated Resistor, Metallized Impregnated Paper, Class X2, 275 VAC Overview Applications The P409 Series is constructed of multilayer metallized paper
General Purpose Metallized Polyester Film Capacitors R82 Series, Radial, 5 mm Lead Spacing, VDC (Automotive Grade) Applications
General Purpose Metallized Polyester Film Capacitors R82 Series, Radial, 5 mm, 50 400 VDC (Automotive Grade) Overview The R82 Series is constructed of metallized polyester film (wound or stacked technology)
Surface Mount Polyester (PET) Film Capacitor JSN, Unencapsulated Stacked Chip with Flat Terminations, VDC, for DC Link (Automotive Grade)
JSN, Unencapsulated Stacked Chip with Flat Terminations, 63 250 VDC, for DC Link (Automotive Grade) Overview JSN is a jumbo stacked, naked metallized polyester film capacitor with flat terminations, which
General information. Contents Pitch Rated Voltage Capacitance Page mm Vdc range range
General information DC Film Capacitors Please refer to our Internet address (http://www.arcotronics.com) for updated information on Arcotronics products, services and news. Contents Pitch Rated Voltage
Type RA Radial PET Film Capacitors
The style capacitor is constructed in an efficient rugged selfencased size. The non-inductive multilayer metallized polyester film capacitor features a small size, high dv/dt capability, very low ESR at
AC and Pulse Film Foil Capacitors KP Radial Potted Type
KP 1830 AC and Pulse Film Foil Capacitors L max. W max. Marking FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel 0.5 H max. Material categorization: for definitions of compliance
Applications. Capacitance Code (pf)
AC Line EMI Suppression and RC Networks PMZ2035 Series Metallized Impregnated Paper, Class X1, 440 VAC/1,000 VDC Overview Applications The PMZ2035 Series is constructed of multilayer metallized paper encapsulated
KP 376 KP/MMKP 376. AC and pulse metallized polypropylene film capacitors. Fig.1 Simplified outlines.
KP AND KP/MMKP RADIAL POTTED CAPACITORS PITCH 15/22.5/27.5 mm P=15 mm P = 22.5 to 27.5 mm DR931960 Fig.1 Simplified outlines. FEATURES 15.0 to 27.5 mm lead pitch Supplied loose in box and taped on reel.
Applications PHZ9004 E F 7100 M R06L2
AC Line EMI Suppression and RC Networks PHZ9004 Series Metallized Polypropylene Film, 300 VAC 3x X2 with Separate Terminals for Three-Phase Filtering Overview The PHZ9004 Series is constructed of metallized
Film Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32560... B32564 Date: August 2004 EPCOS AG 2005. Reproduction, publication and dissemination of this publication, enclosures hereto
Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC. Applications C87 8 B F AA 4 J
C87 Series, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview Polypropylene metallized film with cylindrical aluminium can type filled with resin; faston, plastic deck or cable
Interference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: for definitions of compliance please
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
Not Recommended for New Design, Use New MMKP383 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type 168x12(halfpage) l P h lt w dt 10 l F'
AC and Pulse Metallized Polypropylene Film Capacitors MKP and MKP/MKP Radial Potted Type. LEADS Tinned wire
AC and Pulse Metallized Polypropylene Film Capacitors MKP and MKP/MKP Radial Potted Type CBB817 Dimensions in mm APPLICATIONS Where steep pulses occur e.g. SMPS (switch mode power supplies). Motor control
Metallized Polycarbonate film capacitors MKC 344
MKC RADIAL POTTED CAPACITORS PITCH 10/15/22.5/27.5 mm handbook, full pagewidth P = 10 mm P = 15 mm P = 22.5 to 27.5 mm DR931980 Fig.1 Simplified outlines. FEATURES 10 to 27.5 mm lead pitch Small dimensions
Applications PHE448 R B 4150 J R06
General Purpose, Pulse and DC Transient Suppression PHE448 Series Polypropylene Film/Foil, Radial Overview The PHE448 Series is a capacitor with polypropylene film dielectric and metal foil electrodes,
DATA SHEET MKP 435 X2
DATA SHEET Interference suppression film capacitors, NEW File under BCcomponents, BC05 2001 Jun 22 MKP RADIAL POTTED TYPE PITCH 15/22.5/27.5 mm 296x12(full_width) CBB112 Fig.1 Simplified outlines. FEATURES
DATA SHEET. KP 460 to 464 Polypropylene film foil capacitors. BCcomponents
DATA SHEET KP 460 to 464 Polypropylene film foil capacitors Supersedes data of 2001 Sep 13 File under BCcomponents, BC05 2002 Oct 09 KP AXIAL EPOXY LACQUERED TYPE 296x12(full_width) CBA369 Fig.1 Simplified
Aerovox Corp. Type RBPS IGBT Snubber Capacitor Modules Direct Mount and Board Level IGBT Capacitor Modules RoHS Compliant Highlights
Direct Mount and Board Level IGBT Capacitor Modules Type RBPS IGBT snubber capacitor modules for power electronics can be mounted directly onto the IGBT or mounted as a board level product for protection
NGM Snubber Capacitors
NGM Snubber Capacitors Snubber Capacitors of Metalized Polypropylene Film With Internal Series Connection Features Very High Pulse Strength High Current Highest possible contact reliability RoHS-compatible
Type 725M, Orange Drop, Metallized Polypropylene Film Capacitors
Type 725M Orange Drop Metallized Polypropylene Film Capacitors Features Radial-lead Pressed profile, compact size Non-inductively wound Very low ESR/ESL Self-healing properties Specifications Capacitance
Type 715P, Orange Drop, Polypropylene Film/Foil Capacitors
Features Long history of proven reliability Low dissipation factor. Tolerances as close as ±1%. Excellent stability, virtually linear temperature coefficient. Various lead spacings, crimp styles and lead
Type 716P, Orange Drop, Polypropylene Film/Foil Capacitors
Features Copper leads. Extremely low dissipation factor. Superb high frequency response. Excellent stability, virtually linear temperature coefficient. Various lead spacings, crimp styles and lead lengths
Interference Suppression Film Capacitor - Class X2 Axial MKT 253 V AC - Continuous Across the Line
Interference Suppression Film Capacitor - Class X2 Axial MKT 253 V AC - Continuous Across the Line FEATURES Axial mounting Low building height Material categorization: for definitions of compliance please
Applications PMR210 M B 5220 M 100 R30
AC Line EMI Suppression and RC Networks PMR210 Series Metallized Impregnated Paper, Class X1, 250 VAC Overview The PMR210 Series is constructed of multilayer metallized paper encapsulated and impregnated
Plastic Film Capacitors. Metallized Polypropylene Film Capacitors E Z P E. Metallized Film
Metallized Polypropylene Film Capacitors Type: EZPE Series Features High safety, Self-healing and Self-protecting function built-in Long product life, High reliability Low loss, Low ESR Flame retardant
H ±3 % 3C 1600VDC J ±5 %
Plastic Film Capacitors Metallized Polypropylene Film Capacitors Type: ECWH(A) Designed for high frequency and pluse applications. Features Small size Excellent electrical characteristics Low loss Low
Film Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32572, B32573 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
Types MCH and MCHN Multilayer High RF Power Capacitors
2500 & 4000 Volt RF Capacitors for Medical Imaging Coils, Plasma Generators, VHF/UHF Power Amplifiers and Antenna Tuning with Nonmagnetic Option The flexible aluminum silicate dielectric eliminates cracking
Interference Suppression Film Capacitors MKP Radial Potted Type
FEATURES 168x12(halfpage) l h w l h h' w 7.5 to 27.5 mm lead pitch. Supplied loose in box, taped on ammopack or reel Lead (Pb)-free product e3 P lt Ødt F' F 10 (1) 15 H Ødt RoHS-compliant product RATED
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: NP0/X7R (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: (Pb Free & RoHS compliant) 2.2 pf to 4.7 nf Product specification Mar 1, 2007 V. 0 Product specification 2 SCOPE This specification
One WORLD One Brand One Strategy One Focus One Team One KEMET
RC Snubber Network Impregnated Paper PMZ2035 RC Snubber, Class X1, 440VAC/1000VDC Construction Multilayer metallized paper encapsulated and impregnated in selfextinguishing material meeting the requirements
Maximum rated voltage is the limiting voltage
Key Features Metal film technology Non-flammable High power in small package High stability, reliability and uniformity characteristics Good performance for pulse applications Defined interruption behavior
Metallized Polypropylene Film Capacitor AC Filtering Radial Type
Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see www.vishay.com/doc?9991
Metallized Polypropylene Film Capacitor AC Filtering Radial Type
Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see www.vishay.com/doc?999
Capacitance. Capacitance. Rated voltage. Suffix 3B 1250VDC J ±5 % Rated voltage 3F 3000VDC J ±5 %
Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type: ECWH(C) Designed for high frequency and pulse applications. Features Excellent electrical characteristics Low loss Flame-retardant
AC Line EMI Suppression and RC Networks PMZ2035 Series Metallized Impregnated Paper, Class X1, 440 VAC/1,000 VDC. Applications
AC Line EMI Suppression and RC Networks PMZ2035 Series Metallized Impregnated Paper, Class X1, 440 VAC/1,000 VDC Overview The PMZ2035 Series is constructed of multilayer metallized paper encapsulated and
MKP X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors 168x12(halfpage) l w FEATURES 15 to 27.5 mm lead pitch. Supplied loose in box, taped on reel Lead (Pb)-free product e3 h RoHS-compliant product RoHS COMPLIANT RATE
Interference Suppression Film Capacitor - Class X2 Radial MKT 310 V AC - High Stability Grade
Interference Suppression Film Capacitor - Class X2 Radial MKT 310 V AC - High Stability Grade FEATURES 15 mm to 37.5 mm lead pitch Internal series construction AEC-Q200 qualified for C 470 nf Material
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage: NP0/X7R (Pb Free & RoHS compliant)
w DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage: NP0/X7R (Pb Free & RoHS compliant) 1K V TO 4K V 10 pf to 33 nf Sep 30, 2005 V. 1 2 SCOPE This specification describes Highvoltage
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage: NP0/X7R (Pb Free & RoHS compliant)
w DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage: NP0/X7R (Pb Free & RoHS compliant) 100 V TO 500 V 10 pf to 470 nf Product specification Sep 08, 2005 V. 0 Product specification 2 SCOPE
C 062 C 105 K 1 R 5 T A Rated Voltage (VDC) 5 = 50 1 = = 200
Radial Through Hole Multilayer Ceramic Capacitors Radial, Molded, X7R Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s epoxy molded radial through-hole ceramic capacitors in X7R dielectric feature
Metallized Polypropylene Film Capacitor DC-Link Capacitor
Metallized Polypropylene Film Capacitor DC-Link Capacitor FEATURES High density DC-link capacitor (more C per volume) Very long useful life time: up to 100 000 h at U NDC and 70 C High ripple current capability,
Interference Suppression Film Capacitors MKP Radial Potted Type
MKP 339 X2 Interference Suppression Film Capacitors FEATURES 168x12(halfpage) l w l w 7.5 to 27.5 mm lead pitch. Supplied loose in box, taped on ammopack or reel P h imensions in mm (1) F -F
Selection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/ C):
Thin Film Precision Resistors 1206 1210 Rated Power @ 70 C: 0.125W 0.2W Resistance Range (Ohms) Min: 4R7 4R7 4R7 1R0 4R7 1R0 4R7 4R7 4R7 1R0 4R7 1R0 Max: 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5
Plastic Film Capacitors
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Applications. digits of the capacitance value. First digit indicates the total number of digits in the capacitance value.
AC Line EMI Suppression and RC Networks PME271Y Series Impregnated Paper, Class Y2, 250 VAC Overview Applications The PME271Y Series is constructed of multilayer metallized paper encapsulated and impregnated
Capacitance. Capacitance. Rated voltage. Suffix 3B 1250VDC J ±5 % Rated voltage 3F 3000VDC J ±5 %
Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type: ECWH(C) Designed for high frequency and pulse applications. Features Excellent electrical characteristics Low loss Flame-retardant
Interference Suppression Film Capacitors MKP Radial Potted Type
Not Recommended for New esigns - Use MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 10 mm to 15 mm lead pitch Supplied loose in box, taped on reel Material categorization:
50 VDC 63 VDC 100 VDC. 40 C to +105 C
Plastic Film Capacitors Stacked Metallized Plastic Film Capacitor Type: ECQV(L)/(M) Designed for high density insertion applications. Features Small size and large capacitance Excellent electric characteristics
Radio Interference Suppression Components
Contents General information on Iskra Capacitors for Radio Interference Suppression Components Type Construction of capacitor Class Page KNB metallized polypropylene film capacitor X2 8 KNR metallized
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged fexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
Type 225P, Orange Drop, Polyester Film/Foil Capacitors
Features Radial-lead. Pressed profile. Non-inductively wound, extended foil construction. Over 35 years o f proven dependability. Wide availability through CDE Distribution. Specifications Capacitance
Interference Suppression Film capacitors
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic category
BREL CAPACITOR REFERENCE DATA-1 INSTRUCTION FOR MANUFACTURE CODE
BREL CAPACITOR REFERENCE DATA-1 INSTRUCTION FOR MANUFACTURE CODE Manufacture code including TYPE Code & Lot Number, such as 1.Symbols of Farad Type:(with three letters) a)first alphabet symbolizes dielectric
Product Profile Film Capacitors. for Industrial Applications. just everywhere...
Product Profile 2006 Film Capacitors for Industrial Applications just everywhere... www.epcos.com Welcome to the World of Passive Electronic Components Active everywhere Passive electronic components are
Overview. Applications. Benefits. Leaded Varistors VM Series Dual Function Automotive Grade 125 C
Overview KEMET's VM series of dual function protective devices protect against voltage surges in an automotive voltage region and against radio frequency noise. This component replaces two components a
Interference Suppression PCX2 337 film capacitors
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01μF to 3.3μF Capacitance tolerance ± 10 %, ± 20 % Rated (AC) voltage 50 to 60 Hz 275 V
Type 418P, Orange Drop, Polyester Film/Foil Capacitors. Voltage Ratings: 100 to 1000 Volts DC
Type 418P Orange Drop Round Profile Polyester Film/Foil Capacitors Features Radial-lead. Round profile. Non-inductively wound, extended foil construction. Ratings up to 1000 Volts DC. Specifications Capacitance
FEATURES APPLICATIONS DESCRIPTION UNIT HVR25 HVR37. ± 5; E24 series
High Ohmic (up to 10 M)/High Voltage (up to 3.5 kv) Metal Film Leaded Resistors FEATURES Technology: Metal film High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications actual size Capacitance Range: Voltage Ratings: Temperature Range: Capacitance Tolerance: Dielectric Strength: Insulation
AC Line EMI Suppression and RC Networks PME271Y A E Series Metallized Impregnated Paper, Class Y2, 300 VAC. Applications
AC Line EMI Suppression and RC Networks PME271Y A E Series Metallized Impregnated Paper, Class Y2, 300 VAC Overview The PME271Y A E Series is constructed of multilayer metallized paper encapsulated and
Designed for mission critical applications requiring high power, filtering, hold-up and current pulse generation.
Tantalum Through-Hole Capacitors Hermetically Sealed Overview KEMET's M550 and M551 Modular Series are manufactured by placing T550 or T551 Polymer Hermetic Sealed Capacitors (PHS) in parallel. The T550
Interference Suppression Film Capacitors MKP Radial Potted Type
Not Recommended for New esigns, Use MKP338 1 X1 Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied in box, taped on ammopack or reel Material
RMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10
+5 C +35 C 75% Product specification contained in this data sheet are subject to change at any time without notice If you have any questions or a Purchasing Specification for any quality Agreement is necessary,
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Ultra small: NP0/X5R/X7R/Y5V (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS : NP0/X5R/X7R/Y5V (Pb Free & RoHS compliant) 6.3 V TO 50 V 1 pf to 100 nf Product specification Product specification 2 Surface-Mount Ceramic Multilayer
Type 297, High-Voltage Mica Capacitors Corona-free Mica Coupling Capacitors for Medium-Voltage PDA s
Designed for Partial Discharge Analyzers (PDA s) monitoring rotating machinery or other medium-voltage equipment from 1 to 35 kvac RMS at power-line frequencies of 10 Hz to 1 khz, Mica Capacitor Type 297
Applications C28 4 A C A 4300 AL 0 J. Terminal Style
C28, Cylindrical Plastic Case, Segmented Film 420 VAC/470 VAC Overview C28 is a film capacitor manufactured with segmented metallization to improve reliability. The film winding is placed in a plastic
Aluminum Electrolytic Capacitors Radial, High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial, High Temperature, Low Impedance, High Vibration Capability 40 RTM lower Z longer life 50 RMI 25 C 46 RTI high vibration QUICK REFERENCE DATA DESCRIPTION VALUE Nominal
Precision Thin Film Precision Resistors
Key Features Thin film precision resistors with TC's of 15ppm, 25ppm and 50ppm and tolerances to 0.1%. Applications in measurement, telemetry and for sensing circuits. Case sizes 0402, 0603, 0805, 1206,
Lower Voltage Ceramic Singlelayer DC Disc Capacitors 1 kv DC to 3 kv DC Low Dissipation Factor
Lower Voltage Ceramic Singlelayer DC Disc Capacitors 1 kv DC to 3 kv DC Low Dissipation Factor FEATURES Low losses High stability Low DF minimizes self heating at HF Ideal for high switching to khz Radial
SMD High Power Precision Resistors. Type RP73 Series
Key Features High precision - Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating Terminal finish electroplated 100% matte Sn Applications Communications Industrial
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
AC and Pulse Metallized Polypropylene Film Capacitors KP/MKP Radial Lacquered Type
KP/MKP 375 Vishay Bcomponents A and Pulse Metallized Polypropylene Film apacitors 168x12(halfpage) l seating plane (1) α (2) P A Ø dt Dimensions in mm (1) Hole Ø 1.3 for d t = 0.8 mm (2) 0 α
S C A 69 B 104 J W S. Capacitance Code (pf)
SCA Series, Axial, C 3 Technology, C0G Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s SCA Series axial through-hole ceramic capacitors in C0G dielectric feature proprietary Ceramic Cased Capacitor
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, 110 C Rated
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, 11 C Rated 17918-2 DESCRIPTION The 11 C rated (DIP) feature a high current transfer ratio, low coupling capacitance and high isolation voltage.
Overview. Benefits. Applications. Tantalum Through-Hole Capacitors Radial Dipped T363 & T369 MIL-PRF-49137/2 (CX02 & CX12 Style)
T363 & T369 MIL-PRF-49137/2 (CX02 & CX12 Style) Overview The KEMET T363 and T369 product is manufactured to the requiarements of MIL-PRF-49137, while maintaining all performance characteristics of the
SRM VDE. REG.-Nr. E932. Cap Diameter (D1, mm) Body Diameter (D2, mm)
D2 VDE REG.-Nr. E932 Specifications Per IEC 605- Features B L D IEC60065 & UL676 Compliant MELF packaging yet capable of high power handling Special conductive film enhances anti-surge capability. Absorbs
AC Line Rated Ceramic Disc Capacitors Class X1, 400 V AC / Class Y2, 300 V AC / 250 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, V AC / Class Y, V AC / V AC FEATURES Complying with IEC 638-1 3 rd edition High reliability Complete range of capacitance values Radial leads Singlelayer
Applications PHE448 R B 4150 J R06. The last three digits F 448 B D 152 J 1K6 C. Capacitance Code (pf) First two digits. Table. represent significant
General Purpose, Pulse and DC Transient Suppression PHE448 Series Film/Foil, Radial Overview The PHE448 Series is a capacitor with polypropylene film dielectric and metal foil electrodes, encapsulated
Kxxxzy SIDAC. Teccor brand Thyristors Standard Bidirectional SIDACs. Description
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent
Surge Metal Film Leaded Resistor
Surge Metal Film Leaded Resistor FEATURES Metal film technology High pulse load (up to 10 kv) capability Replacement for carbon-composition resistors Compatible with lead (Pb)-free and lead containing
Overview. Applications. Benefits. Legacy Part Number System. New KEMET Part Number System
AC Line EMI Suppression and RC Networks PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Overview Applications The PME271M Series is constructed of multilayer metallized paper encapsulated
Applications TPI L 180 N. Series Size Code Inductor Inductance Code nh Core Material TPI
Overview The KEMET TPI ferrite core inductors are designed for a very low core loss and its flat wire 1 turn through the construction design enables very high efficiency at large currents. The core material
Data sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RMC-1K-17N1011 /1 Date: 2017. 11. 28 Data sheet Title: Style: FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note:
High Voltage Surge Resistor
High Voltage Surge Resistor FEATURES High pulse-loading (1 kv as specified) capability (flashes) Good replacement for carbon-composite resistors Lead (Pb)-free solder contacts Pure Tin plating provides
High Speed Optocoupler, 100 kbd, Low Input Current, Photodiode Darlington Output
High Speed Optocoupler, 1 kbd, Low Input Current, Photodiode Darlington Output FEATURES High current transfer ratio, 3 % Low input current,.5 ma NC 1 8 V CC High output current, 6 ma A C 2 3 7 6 V B Isolation
Rated Voltage 3 = 25 V 5 = 50 V
Axial Through-Hole Multilayer Ceramic Capacitors Aximax, 400 Series, Axial, Conformally Coated, X8L Dielectric, 25 50 VDC (Commercial & Automotive Grade) Overview KEMET s Aximax conformally coated axial