2nd QERS 2016 September 6, 2016, Brno, Czech Republic
|
|
|
- Ashley Lloyd
- 5 years ago
- Views:
Transcription
1 2nd QERS 2016 September 6, 2016, Brno, Czech Republic FINAL PROGRAM
2 Welcome to the workshop Dear QERS 2016 international workshop participants. We warmly welcome you in Brno, city in the middle of Europe, where the workshop is taking place. Below you will find the final program of the workshop together with useful information regarding workshop location, free time tips and other details. We hope you will enjoy your stay, find a lot of inspiration both during scientific sessions and informal discussions. Workshop location Conference opening, closure and all sessions take place at Brno University of Technology, Faculty of Mechanical Engineering, with the address: Technická 2896/2, Brno Czech Republic
3 Building A1 (Technická 2, Brno)
4 FINAL PROGRAM (Tuesday September 6th) PRESENTATION HALL Building A1 12 floor 8:30-9:45 REGISTRATION 9:45-10:00 OPENING CEREMONY 10:00-10:15 COOPERATION POSSIBILITIES CHAIRMAN: MICHAL HOLUB, PETR BLECHA KOTEK, NOSEK, FIALA, BARTOŠ: RISKS IN THE INDUSTRIAL MANAGEMENT SYSTEMS SECTION 1 10:15-11:30 LUGAUER, WIMMER, ZAEH: DESCRIBING STATISTICAL DEVIATIONS OF PROTECTION TIMES OF LASER SAFETY BARRIERS MICIETA, MARKOVIC, BINASOVA: DEVELOPMENT OF ADAPTIVE ASSEMBLY PROCESSES CIERNA, SUJOVA: APPLICATION OF MODERN QMS KAIZEN MANAGEMENT SYSTEM TURYGIN, MOSYURCHAK, ZHALO, HAMMER: MAINTENANCE AND TECHNICAL DIAGNOSTICS OF MACHINES 11:30-11:45 COFFEE BREAK CHAIRMAN: JIRI KOVAR, KATERINA MOURALOVA JURSOVA, HONUS: STUDY ON DISINTEGRATION OF METALLURGICAL SINTER AS A POSSIBLE IRONMAKING OPTIMIZATION SECTION 2 11:45-13:00 HRDINA, VASIK, HOLUB: DUAL NUMBERS ARITHMETIC IN MULTI AXIS MACHINE ERROR MODELLING TUMA Z., KOTEK, TUMA J., BRADAC: APPLICATION OF VIRTUAL REALITY FOR VERIFICATION OF REAL WORKPLACE STATE HOLUB, BLECHA, BRADAC, MAREK, ZAK: GEOMETRIC ERRORS COMPENSATION OF CNC MACHINE TOOL POKORNY, DLOUHA, KUCERA: STUDY OF THE NECESSITY USE OF VIRTUAL ORIGIN IN ASSESSMENT OF SELECTED FIRE PLUME CHARACTERISTICS 13:00-14:00 LUNCH
5 CHAIRMAN: MILOS HAMMER, ROBERT JANKOVYCH MOURALOVA, ZAHRADNICEK, STREJCEK: SURFACE MORPHOLOGY OF IRON-RHODIUM ALLOY AFTER WIRE EDM MOURALOVA, ZAHRADNICEK, HRDY: OCCURRENCE OF GLOBULE OF DEBRIS ON SURFACES MACHINED BY WEDM SECTION 3 14:00-15:15 HARCARIK, JANKOVYCH: RELATIONSHIP BETWEEN VALUES OF PROFILE AND AREAL SURFACE TEXTURE PARAMETERS PROKES, MOURALOVA, KOVAR: EXPERIMENTAL EVALUATION ON THE QUALITY OF MACHINED SURFACE AFTER TURNING OF MATERIAL INCONEL 625 MOURALOVA, KOVAR, ZAHRADNICEK: MACHINING OF HIGHLY ORIENTED PYROLITIC GRAPHITE USING WEDM AND THE RESULTING QUALITY OF THE SURFACE 15:15-15:30 COFFEE BREAK CHAIRMAN: ZDENEK HADAS, JAN VETISKA BERTHOLD, KOLOUCH, WITTSTOCK, PUTZ: BROADBAND EXCITACION OF MACHINE TOOLS BY CUTTING FORCES FOR PERFORMING OPERATIONAL MODAL ANALYSIS SECTION 4 15:30-16:45 TUMA J., TUMA Z., SYNEK: VERIFICATION OF PREDECTION METHOD OF ENERGY CONSUMPTION OF MACHINE TOOL FEED AXES JANAK, STETINA: QUANTITIES AND SENSORS FOR MACHINE TOOL SPINDLE CONDITION MONITORING UCEN, NOVOTNY: INNOVATION TESTING OF BENDING OF THE MACHINE TOOLS FRAMES LIPUS J., JANKOVYCH, HAMMER, LIPUS T.: VIBRATION AND RELATED DIAGNOSTICS OF MOTORS AND GENERATORS 16:45-17:00 COFFEE BREAK CHAIRMAN: JIRI KOVAR, ONDREJ ANDRS SECTION 5 17:00-18:30 NOVAK, BABJAK, KOT: THERMAL EXPOSITION OF FIREFIGHTERS RUCKA, SUCHACEK: RISK ANALYSIS OF THE DRINKING WATER SUPPLY SYSTEM OF THE SMALL VILLAGE OPOCENSKA, HAMMER: RELIABILITY CENTERED MAINTENANCE
6 SMAJDOROVA, NOSKIEVICOVA: PARAMETRIC AND NONPARAMETRIC METHODS OF STATISTICAL PROCESS CONTROL PELANTOVA, SLAICHOVA: CONTROL OF SPARE PARTS INVENTORY IN ORGANISATIONS MENDRICKY: ACCURACY ANALYSIS OF ADDITIVE TECHNIQUE FOR PARTS MANUFACTORING SRAMEK, JANKOVYCH: ACCURACY OF MEASUREMENT IN NANOMETROLOGY KRBALOVA: ENIRONMENTAL MANAGEMENT OF ENGINEERING PRODUCT DESIGN PROCESS FEDORYCHEVA, HAMMER: AN IDENTIFICATION OF VALUES OF SAFETY CULTURE USING QUESTIONNAIRE SURVEYS JANKOVYCH, WEIGL, KUR: AUTOMATIC STRAIGHTENING OF A HARDENED SHAFTS IVAN MASIN: ADVANCED ANALYTICAL AND CREATIVITY TOOLD FOR LEAN MANUFACTURING AND TPM 19:00-24:00 SOCIAL MEETING (WINE CELLAR)
MAINTENANCE AND MM SCIENCE JOURNAL I 2016 I NOVEMBER 1491
MAINTENANCE AND TECHNICAL DIAGNOSTICS OF MACHINE TOOLS ANDREI TURYGIN, ANDRIY MOSYURCHAK, MAXYM ZHALO, MILOS HAMMER Brno University of Technology, Faculty of Mechanical Engineering, Brno, Czech Republic
Research Center of Manufacturing Technology
Czech Technical University of Prague, Faculty of Mechanical Engineering g Horská 3, 128 00 Praha 2, tel.: +420 221 990 900, fax: +420 221 990 999 http://rcmt.cvut.cz RCMT Intro The Short Introduction of
EFFECTS OF INTERPOLATION TYPE ON THE FEED-RATE CHARACTERISTIC OF MACHINING ON A REAL CNC MACHINE TOOL
Engineering MECHANICS, Vol. 19, 2012, No. 4, p. 205 218 205 EFFECTS OF INTERPOLATION TYPE ON THE FEED-RATE CHARACTERISTIC OF MACHINING ON A REAL CNC MACHINE TOOL Petr Vavruška* The article is focused on
National Conference on Advances in Mechanical Engineering Science (NCAMES-2016)
Design and Development of Milling Attachment for CNC Turing Center Shashank S 1, Dr.Raghavendra H 2 1 Assistant Professor, Department of Mechanical Engineering, 2 Professor, Department of Mechanical Engineering,
6th International Conference on Virtual Machining Process Technology (VMPT), Montréal, May 29th June 2nd, 2017
6th International Conference on Virtual Machining Process Technology (VMPT), Montréal, May 29th June 2nd, 2017 An alternative methodology for Machine Tool Error determination through workpiece measurement.
Department of design methodology summary of 2012
Department of design methodology summary of 2012 Jan Brandejs Institute of machine design Department of design methodology Faculty of mechanical engineering Brno university of technology Academic staff
Statistic evaluation of deviation between guaranteed and measured turbine efficiency
Statistic evaluation of deviation between guaranteed and measured turbine efficiency Petr Ševčík Hydro Power Group Leading Engineer OSC, a.s. Brno, Czech Republic Verification of Gibson method Discharge
Department of design methodology summary of 2011
Department of design methodology summary of 2011 Jan Brandejs Institute of machine design Department of design methodology Faculty of mechanical engineering Brno university of technology Academic staff
INNOVATIONS IN SITTING DESIGN WITH A USE OF CNC TECHNOLOGY
INNOVATIONS IN SITTING DESIGN WITH A USE OF CNC TECHNOLOGY Milan Šimek, Jiří Tauber, Václav Šprdlík Department of Furniture, Design and Habitation, Faculty of Forestry and Wood Technology, Mendel University
FLOOR TYPE MILLING-BORING CENTRE
FP FLOOR TYPE MILLING-BORING CENTRE FP FLOOR TYPE MILLING-BORING CENTRE MULTI-PURPOSE MILLING AND BORING MACHINE IMPROVED FLEXIBILITY AND DYNAMICS High performance and productivity FP FLOOR TYPE MILLING-BORING
Stop and think! Tool changes are automatic but rigging, supervision and quality control are all manual operations.
CNC Background CNC (Computer Numeric Control) is a collective term for computer controlled machine tools used in the fabrication and manufacture of parts. There are hundreds of different types of CNC machine.
DUGARD Machine. DUGARD CNC Lathes. Dugard i-42 Ultimate Multi Axis CNC Turning Centres. Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 DUGARD CNC Lathes Dugard i-42 Ultimate Multi Axis CNC Turning Centres Twin spindle, twin turret and B axis options DUGARD Machine Tools www.dugard.com
Friday 24 August Venue address: Technická 6, Prague, Dejvice Czech National Library of Technology
Friday 24 August Venue address: Technická 6, Prague, Dejvice Czech National Library of Technology 8:00-9:00 Registration & Coffee 9:00-10:30 Investing in General AI session This session is free of charge
TOMAS TRCKA, ALES POLZER, JOSEF SEDLAK
END MILLS WITH PCD INSERTS SHARPENED BY DIFFERENT ELECTRICAL TECHNOLOGIES TOMAS TRCKA, ALES POLZER, JOSEF SEDLAK Brno University of Technology, Faculty of Mechanical Engineering, Brno, Czech Republic DOI:
Using Virtual Reality tools to support simulations of manufacturing instances in Process Simulate: The case of an icim 3000 system
Using Virtual Reality tools to support simulations of manufacturing instances in Process Simulate: The case of an icim 3000 system Radovan Holubek 1,*, Daynier Rolando Delgado Sobrino 1, Peter Košťál 1,
VOLD-KALMAN ORDER TRACKING FILTERING IN ROTATING MACHINERY
TŮMA, J. GEARBOX NOISE AND VIBRATION TESTING. IN 5 TH SCHOOL ON NOISE AND VIBRATION CONTROL METHODS, KRYNICA, POLAND. 1 ST ED. KRAKOW : AGH, MAY 23-26, 2001. PP. 143-146. ISBN 80-7099-510-6. VOLD-KALMAN
THE OPTO -FIBER SENSORY SYSTEM IS USED FOR INTRUSION DETECTION MONITORED AREAS AND TO PREVENT DAMAGE
THE OPTO -FIBER SENSORY SYSTEM IS USED FOR INTRUSION DETECTION MONITORED AREAS AND TO PREVENT DAMAGE Next year OPTOKON will be launching a completely unique system on the market, comprising a multipurpose
AN ANALYSIS OF THE METROLOGY TECHNIQUES TO IMPROVE QUALITY AND ACCURACY
AN ANALYSIS OF THE METROLOGY TECHNIQUES TO IMPROVE QUALITY AND ACCURACY Numan M. Durakbasa 1, Gökcen Bas 2 1 Prof.Dr., Vienna University of Technology, AuM, numan.durakbasa@tuwien.ac.at 2 Dr.techn., Vienna
General Data about RCMT
General Data about RCMT Establishment of the RCMT: RCMT Research Center of Manufacturing Technology (In Czech: Výzkumné Centrum Strojírenské výrobní techniky a technologie) has been established in July
Friday 24 August Venue address: Technická 6, Prague, Dejvice Czech National Library of Technology
Friday 24 August Venue address: Technická 6, Prague, Dejvice Czech National Library of Technology 8:00-9:00 Registration & Coffee 9:00-10:30 Investing in General AI session Pre-registration required for
FLOOR TYPE HORIZONTAL BORING MILLS
FLOOR TYPE HORIZONTAL BORING MILLS GRATA N e w g o a l s n e e d n e w s o l u t WRD 130/150 (Q) 111years1903-2014 WRD 170 (Q) i o n s 05/2014 reg. č. 12392-01 T O S V A R N S D O R F a. s. 1 ABOUT COMPANY
RSF25. RETHINKING MANU FAC- TURING. WHATEVER YOUR VISION FOR TOMORROW MIGHT BE: BUILD IT TODAY.
RSF25. RETHINKING MANU FAC- TURING. WHATEVER YOUR VISION FOR TOMORROW MIGHT BE: BUILD IT TODAY. For your manufacturing tomorrow: RSF25 our model of the future. The result of over 20 years manufacturing
5/11/ DAWOOD COLLEGE OF ENGINEERING & TECHNOLOGY- ENGR. ASSAD ANIS
1 INTRODUCTION TO CNC CNC was developed in late 40 s and early 1950 s by the MIT servomechanisms laboratory With CNC curves are easy to cut as straight lines, complex 3-D structures are relatively easy
Tool Shop. TCM Servicecenter Bochum GmbH TOOL CONSULTING & MANAGEMENT. Copyright Servicecenter Bochum 07/08/2006 Page 1 of 10
Tool Shop TCM Servicecenter Bochum GmbH Servicecenter Bochum 07/08/2006 Page 1 of 10 We See Ourselves as Partners Good partnership to us means to manufacture highquality machine- and equipment components
Report on 2005 International Bar Association Conference
Assistant Attorney-at-Law Andrius Būdvytis Law firm Pukas and partners K.Donelaičio str. 71-2, Kaunas Tel. +370 6 8790090 Fax. +370 7 321919 Email: andriusbudvytis@yahoo.com 2005-10-15, Kaunas, Lithuania
Optimization of Cycle Time through Mastercam Virtual Simulation and Four Axis CNC Milling Machining of Camshaft
ISSN: 2454-132X Impact factor: 4.295 (Volume2, Issue6) Available online at: www.ijariit.com Optimization of Cycle Time through Mastercam Virtual Simulation and Four Axis CNC Milling Machining of Camshaft
FRAUNHOFER INSTITUTE FOR MACHINE TOOLS AND FORMING TECHNOLOGY IWU MACHINE TOOLS AND PRODUCTION SYSTEMS
FRAUNHOFER INSTITUTE FOR MACHINE TOOLS AND FORMING TECHNOLOGY IWU MACHINE TOOLS AND PRODUCTION SYSTEMS 1 2 3 FROM TECHNOLOGY TO MACHINE The Department of Machine Tools conducts research on developing production
ScienceDirect. Modelling Transmission Lines for the Purpose of Data Transmission over Power Lines
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 100 (2015 ) 1381 1388 25th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2014 Modelling Transmission
The GOLEM experimental setup
The GOLEM documentation collection The GOLEM experimental setup Vojtěch Svoboda & the GOLEM team September 26, 2012 Outline of the talk 1 Introduction 2 Experimental setup 3 Golem discharge 4 (Remote)
BPG Blade Profile Grinder reduces sharpening costs for bevel gear cutter blades
Overview BPG Blade Profile Grinder reduces sharpening costs for bevel gear cutter blades BPG Highlights 3 Highly Productive Patented Gleason processes such as QUICKEDGE grinding and optional Adaptive Control,
InnoTesting Improving Efficiency by Controlling Complexity in Testing. Wildau, Aerospace Technology Centre
InnoTesting 2013 Improving Efficiency by Controlling Complexity in Testing Wildau, Aerospace Technology Centre February, 21 22, 2013 Dear participants of InnoTesting Innovation is based on teamwork. To
ULTRA PRECISION HARD TURNING MACHINES
ULTRA PRECISION HARD TURNING MACHINES Hembrug Machine Tools, with more than 50 years experience in the design, manufacturing and marketing of ultra precision, fully hydrostatic turning machines, Hembrug
MP RAM. Series FLOOR TYPE HYDROSTATIC BORING MILLING MACHINES
MP RAM Series FLOOR TYPE HYDROSTATIC BORING MILLING MACHINES POWER ROBUSTNESS PRECISION JUARISTI founded in 1941 has been designing and manufacturing high precision boring and milling machines for over
FIXED TABLE TRAVELLING COLUMN MILLING CENTRE
SP FIXED TABLE TRAVELLING COLUMN MILLING CENTRE SP FIXED TABLE TRAVELLING COLUMN MILLING CENTRE FIXED TABLE TRAVELLING COLUMN MILLING CENTRE ERGONOMIC AND LARGE CAPACITY High precision and productivity
Strip straighteners. Strip spectrum The following coil strips can be processed using our straightening
STRIP STRAIGHTENERS Strip straighteners SOPREM Precision Straighteners ensure your product quality. Distorted metal components are a thing of the past; today quality products are processed regardless of
FLOOR TYPE MILLING-BORING CENTRE
FR FLOOR TYPE MILLING-BORING CENTRE FR FLOOR TYPE MILLING-BORING CENTRE MULTI-PURPOSE MILLING AND BORING MACHINE HIGH PERFORMANCE, ROBUST MACHINING Greater accuracy and higher efficiency FR FLOOR TYPE
Independent Tool Probe with LVDT for Measuring Dimensional Wear of Turning Edge
Independent Tool Probe with LVDT for Measuring Dimensional Wear of Turning Edge Jarosław Chrzanowski, Ph.D., Rafał Wypysiński, Ph.D. Warsaw University of Technology, Faculty of Production Engineering Warsaw,
Factory Virtual Environment Development for Augmented and Virtual Reality
Factory Virtual Environment Development for Augmented and Virtual Reality M. Gregor, J. Polcar, P. Horejsi, M. Simon Abstract Machine visualization is an area of interest with fast and progressive development.
MINERALGUSSTECHNIK. Mineral casting. for optimum performance
MINERALGUSSTECHNIK Mineral casting for optimum performance Product catalog 2017 SCHNEEBERGER A PORTRAIT The most modern plant in Europe. Schneeberger opts for mineral casting. Schneeberger Mineralgusstechnik
Instrumentation and signal processing methods used for machine diagnostics
International Carpathian Control Conference ICCC 2006 Rožnov pod Radhoštěm CZECH REPUBLIC May 29-31, 2006 Instrumentation and signal processing methods used for machine diagnostics VSB Technical University
Computer Aided Manufacturing
Computer Aided Manufacturing CNC Milling used as representative example of CAM practice. CAM applies to lathes, lasers, waterjet, wire edm, stamping, braking, drilling, etc. CAM derives process information
Measurement and compensation of displacement errors by non-stop synchronized data collection
Measurement and compensation of displacement errors by non-stop synchronized data collection Charles Wang and Gianmarco Liotto Optodyne, Inc., Compton, California, USA Email: optodyne@aol.com Abstract
Plasma Chemistry and Plasma Processing November 13-14, 2017 Vienna, Austria
allied academies BROCHURE 5th International Conference on Plasma Chemistry and Plasma Processing November 13-14, 2017 Vienna, Austria Theme: An Ingenious Approach to Discover the Recent Developments and
Inspection capabilities for tomorrow s foundry
Technical Workshop & Exhibition for Foundry Engineers Inspection capabilities for tomorrow s foundry May 10-12, 2017 Orea Hotel VORONĚŽ - Congress Hall. Brno, Czech Republic Hosted by SPL/CICA [ALUCAST,
COMPACT HIGH-SPEED FIVE AXIS MACHINING CENTRE. Peter POKORNÝ
COMPACT HIGH-SPEED FIVE AXIS MACHINING CENTRE Peter POKORNÝ Author: Workplace: Peter Pokorný, Assoc. Professor, PhD. Slovak University of Technology in Bratislava Faculty of Materials Science and Technology
Conference Summary Report
Conference Summary Report on Academia-Industry Matching Event on the Mutual Impact of Industry 4.0 and High-Energy Physics Slovakia, March 15-16, 2018 INDUSTRY 4.0 high-tech strategy for German government
QUALITY ANALYSIS AND TECHNOLOGICAL PORTFOLIO IN PRODUCTION OF THE METAL SCREWS
QUALITY ANALYSIS AND TECHNOLOGICAL PORTFOLIO IN PRODUCTION OF THE METAL SCREWS Stanislaw BORKOWSKI 1, Manuela INGALDI 2, Marta JAGUSIAK-KOCIK 3 Czestochowa University of Technology, Faculty of Management,
KASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts.
KASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts. KASTOssb: More Economic Mass Production Cutting. Great performance, efficient footprint. The vertically running saw blade characterizes
Computer-Aided Manufacturing
Computer-Aided Manufacturing Third Edition Tien-Chien Chang, Richard A. Wysk, and Hsu-Pin (Ben) Wang PEARSON Prentice Hall Upper Saddle River, New Jersey 07458 Contents Chapter 1 Introduction to Manufacturing
THE CONDUCTIVE ADHESIVE JOINS UNDER THERMAL SHOCKS. Ivana BESHAJOVA PELIKANOVA a
THE CONDUCTIVE ADHESIVE JOINS UNDER THERMAL SHOCKS Ivana BESHAJOVA PELIKANOVA a a depth. of Elektrotechnology, Faculty of Electrical Engineering, CTU in Prague, Technická 2, 166 27 Praha 6, Czech Republic,
Table of Contents. Table of Contents. Preface 11 Prerequisites... 12
Table of Contents Preface 11 Prerequisites... 12 Basic machining practice experience... 12 Controls covered... 12 Limitations... 13 The need for hands -on practice... 13 Instruction method... 13 Scope...
Advantages, Function and Characteristics of the DMwriter MX.
DMwriter MX All-in One Overview Advantages, Function and Characteristics of the DMwriter MX. The DMwriter MX Marking Head was designed as an easy to use, economical, spindle actuated permanent marking
Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL.
Drilling Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. The machine used for drilling is called drilling machine. The drilling operation
ME 410 Mechanical Engineering Systems Laboratory
ME 410 Mechanical Engineering Systems Laboratory Laboratory Lecture 1 GEOMETRIC TOLERANCING & SOURCES OF ERRORS Geometric dimensioning and tolerancing (GD&T) is a symbolic language used on engineering
Seminars Automation Academy Denmark
Seminars Automation Academy Denmark Applied Automation Engineer by B&R Denmark Innovating and sustaining advanced production systems requires well-educated, highlytrained employees. Training lays the foundation
Vibration Sensing technique for monitoring condition of ball/rolling bearings and gearboxes. G. V. ZUSMAN, Ph.D, D.Sc.
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic Vibration Sensing technique for monitoring condition of ball/rolling bearings and gearboxes
Pilous ARG 220 DESCRIPTION
OFFER LIST Pilous Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz ARG 220 2600 X 27 X 0,9 90 +45 +60 220 170 105 220 160 75 270 x 150 175 x 80 105
3 AXES LINEAR DRIVE LASER CUTTING MACHINE
LASER CUTTING 3 AXES LINEAR DRIVE LASER CUTTING MACHINE 3 AXES LINEAR DRIVE LASER CUTTING MACHINE RELIABLE, HIGH QUALITY LASER PROCESSING WITH AN APPLICATION-ORIENTED APPROACH HIGH SPEED LINEAR DRIVES
CHATTER STABILITY INVESTIGATION IN MICRO-MILLING 1. INTRODUCTION
Journal of Machine Engineering, Vol. 13, No. 2, 2013 micro-milling, impact test, vibration Marcin MATUSZAK 1 Bartosz POWALKA 1 Pawel KOCHMANSKI 1 CHATTER STABILITY INVESTIGATION IN MICRO-MILLING The paper
MODULAR TRAINING SYSTEM IN VIRTUAL REALITY ENVIRONMENT MSEVR
automated and robotic system, robot, simulation, teaching, virtual reality Vladimír BALÁŽ, Marek VAGAŠ, Mikuláš HAJDUK *, Ján SEMJON MODULAR TRAINING SYSTEM IN VIRTUAL REALITY ENVIRONMENT MSEVR Abstract
WE CREATE AN EXCELLENT FUTURE TOGETHER
WE CREATE AN EXCELLENT FUTURE TOGETHER Introduce yourself on SRIF 2018 2018 Brno s Exhibition Centre II. YEAR 2017 Recapitulation Science Research Innovation Fair creates a new interdisciplinary platform
GF Machining Solutions Speed of Development : The Future of Machine Building. Sergei Schurov 23/06/2016
GF Machining Solutions Speed of Development : The Future of Machine Building Sergei Schurov 23/06/2016 Heritage Innovation Outlook Machine Tools Industry: Journey Through the Time Heritage Swiss Trains
OM GALAXY. Company Profile. Engineering Packaging Pipe Fitting PRECISION MOULD CRAFTS PVT. LTD.
Engineering Packaging Pipe Fitting Company Profile Chairman's Message "Employees are our Strength". We encourage our employees to come out with innovative ideas, express their views, interact with each
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE. On Industrial Automation and Control
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE On Industrial Automation and Control By Prof. S. Mukhopadhyay Department of Electrical Engineering IIT Kharagpur Topic Lecture
E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM
E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM This new Jet ZX CNC lathe takes the best features of our top line manual lathes and adapts the Anilam 4200T CNC system to control the various
ANALYSIS OF MEASUREMENT ACCURACY OF CONTACTLESS 3D OPTICAL SCANNERS
ANALYSIS OF MEASUREMENT ACCURACY OF CONTACTLESS 3D OPTICAL SCANNERS RADOMIR MENDRICKY Department of Manufacturing Systems and Automation, Technical University of Liberec, Liberec, Czech Republic DOI: 10.17973/MMSJ.2015_10_201541
WIN2 SERIES. NC Multislide Automatic Lathe
WIN2 SERIES NC Multislide Automatic Lathe WIN2 SERIES NC Multislide Automatic Lathe NEW WIN2 SERIES FROM MUPEM FLEXIBILITY, STURDINESS AND PRODUCTIVITY. MACHINES THAT WILL BOOST YOUR EARNINGS. Our new
Cutting Process Monitoring by Means of Acoustic Emission Method Part I New Approach of Acoustic Emission Sensor
Cutting Process Monitoring by Means of Acoustic Emission Method Part I New Approach of Acoustic Emission Sensor Jan Zizka 1, Petr Hana and Lenka Hamplova 3 1, 3 Technical University of Liberec, Faculty
K series VK-1060 VERTICAL MACHINING CENTER
K series VK-1060 VERTICAL MACHINING CENTER VK-1060 VERTICAL MACHINING CENTER B ringing the most flexible & most competitive advantage of TWiNHOrN to a broader range of machining applications. From prototype
The best of productivity with CNC flexibility
The best of productivity with CNC flexibility Productive. Accurate. Mikron Multistar NX-24 1 Mikron Multistar NX-24 For an unbeatable cost per part Do you need to machine complex and highly precise parts
CVVOZE Power Laboratories (CVVOZEPowerLab)
CVVOZE Power Laboratories (CVVOZEPowerLab) BRNO, SEPTEMBER 2016 1 Centre for Research and Utilization of Renewable Energy Centre for Research and Utilization of Renewable Energy (CVVOZE) was established
Machining of axisymmetric forms and helical profiles on cylindrical workpiece using wire cut EDM. Harshal G. Dhake and G.L.
252 Int. J. Machining and Machinability of Materials, Vol. 12, No. 3, 2012 Machining of axisymmetric forms and helical profiles on cylindrical workpiece using wire cut EDM Harshal G. Dhake and G.L. Samuel*
New design, ideal ergonomics: Both the work space and the control of the HSC MP7 impress with an excellent ease of operation. The tool changer can
New design, ideal ergonomics: Both the work space and the control of the HSC MP7 impress with an excellent ease of operation. The tool changer can also be operated easily from the front thanks to a pivoting
Safety with system. North West Tree Officers Meeting 2011 IML Innovative wood testing systems
Safety with system Test and Measuring Instruments for Trees and Timber Structures How healthy is the tree? In the context of tree care and tree inspection our instruments help to detect inner defects at
Mechatronics 2017 September 6 8, 2017, Brno, Czech Republic
Conference Program The 12th International Conference on Mechatronics 2017 The Mechatronics conferences series is held by rotation in Czech Republic and Poland and it is the oldest of mechatronic conferences
Organised by: Science Buskers Festival 2017
Organised by: Science Buskers Festival 2017 What is Science Busking? What is Science Busking? Effective way of communicating science Live demonstrations and interpretations Lively, interactive and very
Content. Contributors... xix
Content Contributors... xix 1 Machine Tools for Removal Processes: A General View... 1 L. Norberto López de Lacalle and A. Lamikiz 1.1 Basic Definitions and History... 1 1.1.1 Historical Remarks... 2 1.2
Department of 4i Laboratory IITKanpur. Conventional/non conventional Machining tools For industrial applications
Department of 4i Laboratory IITKanpur Conventional/non conventional Machining tools For industrial applications Machining facilities available Rapid prototyping CNC Water Jet Laser cutting Lathe Drilling
Invitation. Looking forward to seeing you in Pilsen. Pavel Trnka. Chairman. Václav Mentlík. Honorable Chairman
Invitation On behalf of the Organizing Committee, it is my honor and pleasure to invite you to the 2018 International Conference on Diagnostics in Electrical Engineering (Diagnostika), which will take
QC YK7340. Horizontal CNC Form Gear Grinding Machine
1 QC YK7340 Horizontal CNC Form Gear Grinding Machine The Model #YK7340A CNC Profile (Form) Wheel Gear Grinding Machine is used for grinding precise, special cylindrical gears with an outside diameter
STAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
INDICATION OF FUNCTIONAL DIMENSION ACCORDING ISO GPS HOW SHALL WE APPLICATE?
INDICATION OF FUNCTIONAL DIMENSION ACCORDING ISO GPS HOW SHALL WE APPLICATE? Karel PETR 1 1 Department of Designing and Machine Components, Faculty of Mechanical Engineering, Czech Technical University
AN EXPERIMENTAL STUDY ON ROUNDNESS ERROR IN WIRE EDM FOR FERRO MATERIALS
AN EXPERIMENTAL STUDY ON ROUNDNESS ERROR IN WIRE EDM FOR FERRO MATERIALS S. Ajaya Kumar Asst. Prof. Department of Mechanical Engineering SVEC, Suryapet TS India ajayakumarme1971@gm ail.com DR.A.PRABHU
Volumetric positioning accuracy of a vertical machining center equipped with linear motor drives (evaluated by the laser vector method)
Volumetric positioning accuracy of a vertical machining center equipped with linear motor drives (evaluated by the laser vector method) O.Svoboda Research Center of Manufacturing Technology, Czech Technical
NZQF NQ Ref 1262 Version 3 Page 1 of 22
NZQF NQ Ref 1262 Version 3 Page 1 of 22 National Certificate in (Level 4) with strands in Fitting and Machining, General Engineering, Machining, Maintenance Engineering,, and Electricity Supply Level 4
An experimental investigation of vibration characteristics in the diamond wire sawing of granite
An experimental investigation of vibration characteristics in the diamond wire sawing of granite Hui Huang*, Guoqin Huang, Hua Guo, Xipeng Xu Institute of Manufacturing Engineering, Huaqiao University,
Theory and praxis of synchronised averaging in the time domain
J. Tůma 43 rd International Scientific Colloquium Technical University of Ilmenau September 21-24, 1998 Theory and praxis of synchronised averaging in the time domain Abstract The main topics of the paper
Effect of spindle speed and feed rate on surface roughness of Carbon Steels in CNC turning
Available online at www.sciencedirect.com Procedia Engineering 38 (2012 ) 691 697 International Conference on Modeling, Optimization and Computing (ICMOC 2012) Effect of spindle speed and feed rate on
Chapter 14 Automation of Manufacturing Processes and Systems
Chapter 14 Automation of Manufacturing Processes and Systems Topics in Chapter 14 FIGURE 14.1 Outline of topics described in this chapter. Date 1500Ğ1600 1600Ğ1700 1700Ğ1800 1800Ğ1900 Development Water
MANUAL BEVELLING AND DEBURRING SYSTEM B15 AIR
MANUAL BEVELLING AND DEBURRING SYSTEM B15 AIR ord. No. 27 220 Operating Instructions for the device Subject to change 1 Table of Contents General Information 3 Description of the machine B15 AIR 3 Identification
We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting
We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting bending, pressing and forming turning and milling welding - stainless,
Syslog Technologies Innovative Thoughts
MINI MILLING MACHINE SYNOPSIS A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a rotating cutter or end mill which rotates
PF 61 Universal Cylindrical Grinding Machine PF 61 Universal Cylindrical Grinding for Flexible Production Thanks to its modular design, the PF 61 universal cylindrical grinding machine is your ideal choice
High Volume Titanium cutting Challenge, Technology and Solutions
High Volume Titanium cutting Challenge, Technology and Solutions Rorschacherberg, September 15 berthiez bumotec dörries droop+rein heckert scharmann sip starrag ttl wmw Titanium Applications Aircraft Structural
VISUALISATION OF CORROSION ACOUSTIC SIGNALS USING QUALITY TOOLS
ACTA UNIVERSITATIS AGRICULTURAE ET SILVICULTURAE MENDELIANAE BRUNENSIS Volume 62 7 Number 1, 2014 http://dx.doi.org/10.11118/actaun201462010065 VISUALISATION OF CORROSION ACOUSTIC SIGNALS USING QUALITY
To the Front Lines of Digital Transformation
To the Front Lines of Digital Transformation Seeing the Heretofore Unseen Future Tips for Digital Transformation The Fujitsu Digital Transformation Center (DTC) is a co-creation workshop space that empowers
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 3070-2 Fourth edition 2016-08-01 Corrected version 2016-12-15 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part
New Long Stroke Vibration Shaker Design using Linear Motor Technology
New Long Stroke Vibration Shaker Design using Linear Motor Technology The Modal Shop, Inc. A PCB Group Company Patrick Timmons Calibration Systems Engineer Mark Schiefer Senior Scientist Long Stroke Shaker
Big Data; The New Folding Carton Industry
Working Programme Wednesday 14 September 2016 11.00 18.00 hrs ECMA internal meetings (Committees and Forums) 12.00 19.00 hrs Arrival participants and registration at the ECMA desk 19.00 hrs Welcome cocktail
CONFERENCE AGENDA USER CONFERENCE 2018 Hollywood Beach, Florida April 30th May 3 rd, 2018
CONFERENCE AGENDA th rd April 30 May 3, 2018 Thanks to Our Sponsors 2 1 DAY 1: Monday, April 30 th, 2018 Welcome to Hollywood Beach Kick start the conference on a light note! Unwind with your peers and