Chapter 14 Automation of Manufacturing Processes and Systems

Size: px

Start display at page:

Download "Chapter 14 Automation of Manufacturing Processes and Systems"

Duane Cuthbert Lewis
6 years ago
Views:

1 Chapter 14 Automation of Manufacturing Processes and Systems

2 Topics in Chapter 14 FIGURE 14.1 Outline of topics described in this chapter.

3 Date 1500Ğ Ğ Ğ Ğ1900 Development Water power for metalworking; rolling mills for coinage strips. Hand lathe for wood; mechanical calculator. Boring, turning, and screw cutting lathe, drill press. Copying lathe, turret lathe, universal milling machine; advanced mechanical calculators Sheet-metal cards with punched holes for automatic control of weaving patterns in looms Automatic piano player (Pianola). 1900Ğ1920 Geared lathe; automatic screw machine; automatic bottle making machine First use of the word robot. 1920Ğ1940 Transfer machines; mass production First electronic computing machine First digital electronic computer First use of the word automation Invention of the transistor First prototype numerical-control machine tool Development of the symbolic language APT (Automatically Programmed Tool); adaptive control Commercially available NC machine tools Integrated circuits; first use of the term group technology Industrial robots Large-scale integrated circuits Programmable logic controllers. 1970s First integrated manufacturing system; spot welding of automobile bodies with robots; microprocessors; minicomputer-controlled robot; flexible manufacturing system; group technology. History of Automation TABLE 14.1 Developments in the History of Automation and Control of Manufacturing Processes (see also Table 1.1) 1980s s Artificial intelligence; intelligent robots; smart sensors; untended manufacturing cells. Integrated manufacturing systems; intelligent and sensor-based machines; telecommunications and global manufacturing networks; fuzzy logic devices; artificial neural networks; Internet tools; virtual environments; high-speed information systems.

4 Type of Production and Volume Type of production Number produced Typical products Experimental or prototype 1-10 All types Piece or small batch <5000 Aircraft, machine tools, dies Batch or high volume ,000 Trucks, agricultural machinery, jet engines, diesel engines, orthopedic devices Mass production 100,000+ Automobiles, appliances, fasteners, bottles, food and beverage containers TABLE 14.2 Approximate annual volume of production.

5 Flexibility vs. Productivity FIGURE 14.2 Flexibility and productivity of various manufacturing systems. Note the overlap between the systems, which is due to the various levels of automation and computer control that are possible in each group. See also Chapter 15 for more details. Source: U. Rembold et al., Computer Integrated Manufacturing and Engineering, Addison-Wesley, 1993.

6 Characteristics of Production Methods FIGURE 14.3 General characteristics of three types of production methods: job shop, batch production, and mass production.

7 Transfer Mechanisms FIGURE 14.4 Two types of transfer mechanisms: (a) straight, and (b) circular patterns.

8 Transfer Line Example FIGURE 14.5 A traditional transfer line for producing engine blocks and cylinder heads. Source: Ford Motor Company.

9 Measurement Approaches FIGURE 14.6 Positions of drilled holes in a workpiece. Three methods of measurement are shown: (a) absolute dimensioning, referenced from one point at the lower left of the part; (b) incremental dimensioning, made sequentially from one hole to another; and (c) mixed dimensioning, a combination of both methods.

10 Numerical Control Machine Tool FIGURE 14.7 Schematic illustration of the major components of a numerical control machine tool.

11 Open and Closed Loop Control FIGURE 14.8 Schematic illustration of the components of (a) an open-loop, and (b) a closed-loop control system for a numerical control machine. DAC means digital-toanalog converter.

12 Measurement of Linear Displacement FIGURE 14.9 Direct measurement of the linear displacement of a machine-tool worktable. (b) and (c) Indirect measurement methods.

Path of Cutters in NC FIGURE 14.10 Movement of tools in numerical control machining.

13 Path of Cutters in NC FIGURE Movement of tools in numerical control machining. (a) Point-to-point system: The drill bit drills a hole at position 1, is then retracted and moved to position 2, and so on. (b) Continuous path by a milling cutter. Note that the cutter path is compensated for by the cutter radius. This path can also compensate for cutter wear.

14 Types of Interpolation FIGURE Types of interpolation in numerical control: (a) linear; (b) continuous path approximated by incremental straight lines; and (c) circular.

15 Illustration of Cutter Paths FIGURE (a) Schematic illustration of drilling, boring, and milling operations with various cutter paths. (b) Machining a sculptured surface on a five-axis numerical control machine. Source: The Ingersoll Milling Machine Co.

Adaptive Control in Turning FIGURE 14.13 Schematic illustration of the application of adaptive control (AC) for a turning operation.

16 Adaptive Control in Turning FIGURE Schematic illustration of the application of adaptive control (AC) for a turning operation. The system monitors such parameters as cutting force, torque, and vibrations; if they are excessive, it modifies process variables such as feed and depth of cut to bring them back to acceptable levels.

Adaptive Control in Milling FIGURE 14.14 An example of adaptive control in milling.

17 Adaptive Control in Milling FIGURE An example of adaptive control in milling. As the depth of cut or the width of cut increases, the cutting forces and the torque increase. The system senses this increase and automatically reduces the feed to avoid excessive forces or tool breakage, in order to maintain cutting efficiency. Source: Y. Koren.

In-Process Inspection FIGURE 14.15 In-process inspection of workpiece diameter in a turning operation.

18 In-Process Inspection FIGURE In-process inspection of workpiece diameter in a turning operation. The system automatically adjusts the radial position of the cutting tool in order to produce the correct diameter.

Self-Guided Vehicle FIGURE 14.16 A self-guided vehicle (Caterpillar Model SGC- M) carrying a machining pallet. The vehicle is aligned next to a stand on the floor.

19 Self-Guided Vehicle FIGURE A self-guided vehicle (Caterpillar Model SGC- M) carrying a machining pallet. The vehicle is aligned next to a stand on the floor. Instead of following a wire or stripe path on the factory floor, this vehicle calculates its own path and automatically corrects for any deviations. Source: Courtesy of Caterpillar Industrial, Inc.

Six-Axis Robot FIGURE 14.17 (a) Schematic of a six-axis S-10 GMF robot. The payload at the wrist is 10 kg (22 lb.) and repeatability is ±0.2 mm (±0.008 in.). The robot has mechanical brakes on all its axes, which are coupled directly.

20 Six-Axis Robot FIGURE (a) Schematic of a six-axis S-10 GMF robot. The payload at the wrist is 10 kg (22 lb.) and repeatability is ±0.2 mm (±0.008 in.). The robot has mechanical brakes on all its axes, which are coupled directly. (b) The work envelope of a robot, as viewed from the side. Source: GMFanuc Robotics Corporation.

21 Grippers for Robots FIGURE (a) Various devices and tools attached to end effectors to perform a variety of operations. (b) A system that compensates for misalignment during automated assembly. Source: ATI Industrial Automation.

22 Types of Industrial Robots FIGURE Four types of industrial robots: (a) Cartesian (rectilinear); (b) cylindrical; (c) spherical (polar); and (d) articulated (revolute, jointed, or anthropomorphic).

23 Work Envelopes for Robots FIGURE Work envelopes for three types of robots. The choice depends on the particular application. See also Fig b.

Source: Courtesy of Cincinnati Milacron, Inc. FIGURE 14.

24 Robot Applications FIGURE Spot welding automobile bodies with industrial robots. Source: Courtesy of Cincinnati Milacron, Inc. FIGURE Sealing joints of an automotive body with an industrial robot. Source: Courtesy of Cincinnati Milacron, Inc.

25 Automated Assembly FIGURE Automated assembly operations using industrial robots and circular and linear transfer lines.

26 Smart Tool Holder FIGURE A tool holder equipped with thrust force and torque sensors (smart tool holder), capable of continuously monitoring the cutting operation. Such tool holders are necessary for adaptive control of manufacturing operations. (See Section 14.5). Source: Cincinnati Milacron, Inc.

Gripper with Tactile Sensors FIGURE 14.25 A robot gripper with tactile sensors.

27 Gripper with Tactile Sensors FIGURE A robot gripper with tactile sensors. In spite of their capabilities, tactile sensors are now being used less frequently, because of their high cost and their low durability in industrial applications. Source: Courtesy of Lord Corporation.

Machine Vision Applications FIGURE 14.26 Examples of machine vision applications. (a) In-line inspection of parts.

28 Machine Vision Applications FIGURE Examples of machine vision applications. (a) In-line inspection of parts. (b) Identification of parts with various shapes, and inspection and rejection of defective parts. (c) Use of cameras to provide positional input Manufacturing to a robot relative Processes to the workpiece. for Engineering (d) Painting Materials, of parts 4th ed. that have different shapes by means of input from a Kalpakjian camera. The Schmid system s memory allows the robot to identify the particular shape to be painted and to proceed Prentice with the Hall, correct 2003 movements of a paint spray attached to the end effector.

29 Modular Workholding System FIGURE Typical components of a modular workholding system. Source: Carr Lane Manufacturing Co.

Adjustable-Force Clamping System FIGURE 14.28 Schematic illustration of an adjustable force clamping system.

30 Adjustable-Force Clamping System FIGURE Schematic illustration of an adjustable force clamping system. The clamping force is sensed by the strain gage, and the system automatically adjusts this force. Source: P. K. Wright and D. A. Bourne, Manufacturing Intelligence, Reading, MA. Addison- Wesley, 1988.

Stages in Designfor-Assembly Analysis FIGURE 14.29 Stages in the design-for-assembly analysis.

31 Stages in Designfor-Assembly Analysis FIGURE Stages in the design-for-assembly analysis. Source: Product Design for Assembly, 1989 edition, by G. Boothroyd and P. Dewhurst. Reproduced with permission.

Transfer Systems for Automated Assembly FIGURE 14.

32 Transfer Systems for Automated Assembly FIGURE Transfer systems for automated assembly: (a) rotary indexing machine; (b) in-line indexing machine. Source: G. Boothroyd.

Guides for Automated Assembly FIGURE 14.

33 Guides for Automated Assembly FIGURE Various guides that ensure that parts are properly oriented for automated assembly. Source: G. Boothroyd.

34 Case Study Housing FIGURE Cast-iron housing and the machining operations required.

35 Modular Fixture Components FIGURE Modular components used to construct the fixture for CNC machining of the castiron housing depicted in Fig

36 Completed Modular Fixture FIGURE Completed modular fixture with cast-iron housing in place, as would be assembled for use ina machining center or CNC milling machine.

TIMTOS 2017 EXHIBITS PROFILE

TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes