Free Length Approx. LOAD (Lbs) Free Length Approx. LOAD (Lbs) Free Length Approx. LOAD (Lbs) Free Length Approx. LOAD (Lbs)
|
|
- Natalie Matthews
- 5 years ago
- Views:
Transcription
1 Poly stocks urethane spring lengths as indicated on the following pages, plus a 24-inch length. We also cut to any desired length (up to 24 inches) although this material may be easily cut to length using a conventional band saw that has a suggested four-hook carbon blade with a raker set, or may be lathe cut with machine tool bits with a positive rake of from 5 to 1 degrees. For high volumes, we have CNC machines to accurately cut the tubes to any lengths economically. Softer Grades PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL-18-(length)-6A Any to 12 1 /2 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL-18-(length)-6A Any to 12 1 /2 PL-18-(length)-9A Any to 12 1 /2 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL-25-(length)-6A Any to 12 1 / Load-Deflection Curves info@polyprod.com
2 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL-25-(length)-8A Any to 12 1 /2 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL-25-(length)-6A Any to 12 1 /2 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL-31-(length)-6A Any to 12 1 /2 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL-31-(length)-8A Any to 12 1 /2 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL-31-(length)-9A Any to 12 1 / info@polyprod.com
3 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL-37-(length)-6A Any to 24 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL-37-(length)-8A Any to 24 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL-37-(length)-9A Any to 24 PL-5-5-6A A.5 PL A A.75 PL-5-1-6A A 1 PL A A 1.25 PL A A 1.5 PL-5-(length)-6A Any to 24 PL-5-5-8A A.5 PL A A.75 PL-5-1-8A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL-5-(length)-8A Any to info@polyprod.com
4 PL-5-5-9A A.5 PL A A.75 PL-5-1-9A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL-5-(length)-9A Any to 24 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL-62-(length)-6A Any to 24 PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL A A 2 PL-62-(length)-8A Any to PL A A.5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL A A 2 PL-62-(length)-9A Any to PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL A A 2 PL-75-(length)-6A Any to info@polyprod.com
5 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL A A 2 PL-75-(length)-8A Any to 24 PL A A.75 PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL A A 2 PL A A 2.5 PL-75-(length)-9A Any to 24 PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL A A 2 PL A A 2.5 PL A A 3 PL-87-(length)-9A Any to PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL A A 2 PL A A 2.5 PL A A 3 PL-87-(length)-9A Any to PL A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL A A 2 PL A A 2.5 PL A A 3 PL-87-(length)-9A Any to info@polyprod.com
6 PL-1-1-6A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL-1-2-6A A 2 PL A A 2.5 PL-1-3-6A A 3 PL-1-(length)-9A Any to PL-1-1-8A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL-1-2-8A A 2 PL A A 2.5 PL-1-3-8A A 3 PL-1-(length)-9A Any to PL-1-1-9A A 1 PL A A 1.25 PL A A 1.5 PL A A 1.75 PL-1-2-9A A 2 PL A A 2.5 PL-1-3-9A A 3 PL-1-(length)-9A Any to info@polyprod.com
A Part. Hammer Assembly
ITEM NO. PART NUMBER DESCRIPTION round shaft/qty. driver_shaft_ Finished Blade Shaft tube_ Tube handle_ Hammer Handle 4 Head_plastic_face Hammer Head Head_plastic_face_ Plastic Face 6 socket set screw
More informationChapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing
MET 33800 Manufacturing Processes Chapter 25 Other Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Other Machining Processes Shaping
More informationBandsaw Blade Selection Guide
Bandsaw Blade Selection Guide 1. Determine Blade Length Refer to your manual for a specified length. or Stretch out an existing blade and measure it. or Set the wheels to the centre of the adjusting bolt
More informationGENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON
GENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON Electromagnetic Iron can be readily machined when proper tool angles are used. Tools should be ground to more acute cutting edge angles than are
More informationChapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
More informationRalphs-Pugh Co. I didn t know you did all that!
Ralphs-Pugh Co. I didn t know you did all that! Ralphs-Pugh Co. The Ralphs-Pugh Company has been keeping industry on the move for over 50 years. We are an innovative supplier that distinguishes itself
More informationAve Edmonton, AB Canada T6P 0E2 Ph: Fax: apachepipe.com world class world wide
PIG OPTIONS 7-1 Model BB Flat Model BB Pencil Model RB 6-14 Flat Model RB 16-48 Flat Model HDPE 3-16 Pencil Model RB 16-48 Pencil 7-2 Model XB Pencil Model XB Flat Model XB Nylon Model XB Cantilever Assembly
More informationNEW Product information
NEW Product information CL 200 Sharpening machine of TC-tipped circular saws on hook and clearance surface CL 200 The idea: Unique machining possibilities in only one clamping - especially for sharpening
More informationMajor Factors That Affect The Severity and Frequency of Wood Machining Defects
Major Factors That Affect The Severity and Frequency of Wood Machining Defects Tool geometry Feed rate Grain direction Species Moisture content (MC) * Defects can be caused from a combination of more than
More informationCatalog 2017/2018. ROENTGEN Over 100 years experience in quality improvement you can t beat it!
Catalog 2017/2018 ROENTGEN Over 100 years experience in quality improvement you can t beat it! WWW.ROENTGEN-USA.COM CONTENTS THE COMPANY OVER 100 YEARS EXPERIENCE 04 TECHNIQUE TOOTH PITCHES 06 SET PATTERNS
More informationBand Machining. Chapter 20
Chapter 20 Band Machining LEARNING OBJECTIVES After studying this chapter, students will be able to: Describe how a band machine operates. Explain the advantages of band machining. Select the proper blade
More informationto convert to multiply by
Band Saw Tool School Read This Important Safety Notice To prevent accidents, keep safety in mind while you work. Use the safety guards installed on power equipment; they are for your protection. When working
More informationROENTGEN Over 100 years experience in quality improvement you can t beat it!
Catalog 2015/2016 ROENTGEN Over 100 years experience in quality improvement you can t beat it! WWW.ROENTGEN-SAW.COM CONTENTS THE COMPANY OVER 100 YEARS EXPERIENCE 04 TECHNIQUE TOOTH PITCHES 06 SET PATTERNS
More informationVictor 1640g Lathe Manual READ ONLINE
Victor 1640g Lathe Manual READ ONLINE Precision Lathe Machine PL-1640 Baileigh - Baileigh's PL-1640 precision lathe machine offers the machinist a quality heavy duty 16 inch swing over bed engine lathe
More informationonlinecomponents.com 150
150 900-147/900-148/900-149 Fish Tape 900-147 900-148 900-149 Made from flexible spring steel and black finish. Equipped with durable plastic container and slide handle. Easy to thread through the pipe
More informationDouble Bar Plate Dowels for Saw-Cut Contraction Joints
Double Bar Plate Dowels for Saw-Cut Contraction Joints Designed to Deliver More Serviceable Slabs Concrete slabs-on-ground must be able to withstand the repetitious, concentrated loads and abrasion of
More informationThis entire file is from Paul Womack (otherwise known as BugBear)
This entire file is from Paul Womack (otherwise known as BugBear) Page 1 of 1 How to make a bow saw (notes to accompany the drawings and photo) Introduction This is not a design. It a reverse-engineering
More informationAUTOMATED MACHINE TOOLS & CUTTING TOOLS
CAD/CAM COURSE TOPIC OF DISCUSSION AUTOMATED MACHINE TOOLS & CUTTING TOOLS 1 CNC systems are used in a number of manufacturing processes including machining, forming, and fabrication Forming & fabrication
More informationThe Ultimate Choice in Any Band Sawing Application
LLC The Ultimate Choice in Any Band Sawing Application We at Towerleaf, have a long standing emphasis on quality and perfection. The result of this tradition is our high quality products, that are backed
More informationCircular Saw Machines
AMADA MACHINE TOOLS EUROPE Circular Saw Machines CMB Circular Saw Machine Series for Bar Material CMB 75/100/150 CNC Circular saw machines for use of carbide tools The ideal solution for sawing bar material
More informationWAYNESBORO AREA SCHOOL DISTRICT CURRICULUM MATERIALS AND MANUFACTURING IV
UNIT: Safety NO. OF DAYS: 20 KEY LEARNING(S): Safe and proper use of tools and machines UNIT : How do I safely work in materials and manufacturing lab & How to apply machines and tools? 3.4.10. D2. Diagnose
More informationTools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File. 2. Cut the stock Place stock in vise and cut with hack saw
Purpose: MAKE CATAPULT ARM Step 1 Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File Materials: Flat aluminum ½ inch stock (see picture below) Gloves required 1. Pick up the aluminum ½
More informationTable of Contents. Production Options 3. Suggested Tooling 4. Special Considerations 4. Sawing 4. Holding 5. Turning 5. Milling 6.
Table of Contents Production Options 3 Suggested Tooling 4 Special Considerations 4 Sawing 4 Holding 5 Turning 5 Milling 6 Drilling 6 Threading 7 Grinding 7 Buffing and Polishing 8 Deburring 8 Lapping
More informationSmall Joinery Saws. U.S. Des. Pat. No. D605,923
Small Joinery Saws U.S. Des. Pat. No. D605,923 The Veritas saws combine the best characteristics of the classic fine joinery saw with those of state-of-the-art materials and construction methods. The tooth
More information3 3" x 14 TPI " x 18 TPI " x 24 TPI " x 8 TPI 19217
BOSCH SABER SAW BLADE P/N 17894 Saber/Jig Saw Blades - Bosch shank Bi-metal construction of high cobalt content High speed steel teeth welded to shatter-resistant alloy steel back for faster cutting and
More informationDIAMOND TOOLING FOR COMPOSITE MATERIALS P.B.S. DIAMOND TOOLING PCD TOOLING FLEXIBLE DIAMOND TOOLING
DIAMOND FOR COMPOSITE MATERIALS P.B.S. DIAMOND PCD FLEXIBLE DIAMOND P.B.S. DIAMOND First patented by Abrasive Technology in 1975, this original brazed bonding process chemically bonds superabrasive crystals
More informationSaw blade catalogue 2008 valid from
Saw blade catalogue 2008 valid from 01.04.2008 Saw blades for all sawing tasks Fast delivery best price MEBA Metall-Bandsägemaschinen GmbH Lindenstr. 6 72589 Westerheim Since 1958 MEBA MEtall- BAndsawing
More informationMS HYDRAULIC GUILLOTINE SHEAR
MS-25-10 HYDRAULIC GUILLOTE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere
More informationSmall Joinery Saws. U.S. Des. Pat. D605,923
Small Joinery Saws U.S. Des. Pat. D605,923 The Veritas saws combine the best characteristics of the classic fine joinery saw with those of state-of-the-art materials and construction methods. The tooth
More informationCnc Router Template Guide READ ONLINE
Cnc Router Template Guide READ ONLINE Warp Drive Project CNC Z AXIS - THE MAKERS GUIDE - Warp Drive Project CNC Z Axis plans are adaptable to many CNC Router tables like the Joe s CNC 4 4 Hybrid. Make
More informationThis is a hands on activity designed to follow the first lesson. It asks students to use needle and thread to create interesting string art designs.
Hands-on activity String Art This is a hands on activity designed to follow the first lesson. It asks students to use needle and thread to create interesting string art designs. It's most appropriate for
More informationHSS Circular Saw Blades. mechelec
HSS Circular Saw Blades mechelec About us MECHELEC manufactures the largest range of HSS Saws and Knives designed for long-period cutting for diverse applications in various industries. From the very beginning,
More informationMetal Band Saw Blade Catalogue
Metal Band Saw Blade Catalogue Saw Blades for All Sawing Tasks Highest Performance Fast Delivery Best Price HIGH PERFORMANCE BAND SAW MACHINES FOR PROFESSIONALS AND BLADES MEBA Bimetal MEBA Bimetal "S"
More informationElectronics Review 2 Cornerstone Electronics Technology and Robotics II
Electronics Review 2 Cornerstone Electronics Technology and Robotics II Administration: o Prayer o Bible Verse Hacksaws: o Vertical and horizontal positions o Hacksaw blade must be positioned with the
More informationTable Saw Disc Sander
instructables Table Saw Disc Sander by tomatoskins A disc sander is a must for any shop! They make quick work of shaping and smoothing stock. Getting the most out of your shop tools can often take you
More informationNAMEPLATE. For over a 105 years, Clausing has been a leader in the Metalworking industry with rugged dependable Machine Tools.
NAMEPLATE PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 NAMEPLATE For over a 105 years, Clausing has been a leader in the Metalworking industry with rugged dependable Machine Tools. Today, Clausing
More informationDesign Guide: CNC Machining VERSION 3.4
Design Guide: CNC Machining VERSION 3.4 CNC GUIDE V3.4 Table of Contents Overview...3 Tolerances...4 General Tolerances...4 Part Tolerances...5 Size Limitations...6 Milling...6 Lathe...6 Material Selection...7
More informationRug-running Sports Coupe
Plan 1 Free Holiday Plans Rug-running Sports Coupe The perfect toy for that cute little rugrat in your life. This project can easily be completed in a weekend and is designed to be tough enough to take
More informationJANUARY 2007 / NEW-072 / PAGE 1 OF 7
JANUARY 2007 / NEW-072 / PAGE 1 OF 7 Ingersoll TaeguLine introduces HEX-TURN, a new, unique addition to the turning product line that offers exceptional performance and cost saving benefits. The 12 cutting
More informationPARTING ISCAR PARTING USER GUIDE. Parting and Grooving. Insert Positioning
90 80 0 70 10 60 20 50 30 40 Parting and Grooving Selection of Inserts For a proper match of insert and cutting material to application, the following variables must be taken into consideration: Width
More informationMetals can be bought from suppliers in standardized forms and sizes, such as round,
1.4 METAL CUTTING BAND SAWS: Metals can be bought from suppliers in standardized forms and sizes, such as round, rectangular or square bar stock or in the form of large sheets (plates). Bar stock normally
More informationMETAL SHEAR SPECIALISTS MS-25-5 HYDRAULIC GUILLOTINE SHEAR
MS-25-5 HYDRAULIC GUILLOTE SHEAR MS-25-5 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere
More informationBAA Course: First Nations Technology 12
BAA Course: First Nations Technology 12 District Name: Cowichan Valley District Number: 79 Developed by: Roderick Beaton Date Developed: November 17, 2004 Schools Names: Cowichan Secondary School, Frances
More informationOutdoor Deck Turf Tile. Installation Instructions
Outdoor Deck Turf Tile Installation Instructions 1 Outdoor Deck Turf Tile Installation Instructions 1 Tool Checklist: Power Tools 7 1/2 Skill saw (13 amp or more) Jigsaw (13 amp or more) Standard Drill
More informationDIAMOND TOOLING FOR COMPOSITE MATERIALS P.B.S. DIAMOND TOOLING PCD TOOLING FLEXIBLE DIAMOND TOOLING
DIAMOND TOOLING FOR COMPOSITE MATERIALS P.B.S. DIAMOND TOOLING PCD TOOLING FLEXIBLE DIAMOND TOOLING Abrasive Technology s diamond tooling is perfectly suited for composites as it provides comprehensive
More informationProduct Information Report Hardflex Band Saw Blades
Overview Hardflex Bandsaw Blades are great all-purpose blades for cutting almost any metal. Cuts tough material like stainless steel. Works equally well on solids, tubing and structural shapes. Features/Benefits
More informationBE CAREFUL Safety precautions should be taken when using tools, especially power tools. Please exercise caution.
PLEASE NOTE: A VIDEO HAS BEEN LAUNCHED ON OUR WEBSITE KEYHOLEFARM.COM THAT OFFERS THE EASY WAY TO CONSTRUCT THE KEYHOLE GARDEN FRAME. IT IS UNDER THE MENU ITEM EXTRAS IN THE UPPER RIGHT-HAND CORNER AREA.
More informationLocoGear. Technical Bulletin - 14 November 28, 2003 Copyright 2003 by LocoGear LIVE STEAM CASTINGS. Tech Bulletin - 14
LIVE STEAM CASTINGS LocoGear Tech Bulletin - 14 John D.L. Johnson 3879 Woods Walk Blvd Lake Worth, FL 33467-2359 jjohnson@locogear.com www.locogear.com Technical Bulletin - 14 November 28, 2003 Copyright
More informationFabrication and testing of a centrifugal pump
Fabrication and testing of a centrifugal pump DISCLAIMER The content of this presentation is for informational purposes only and is intended only for students attending Portland State University. The author
More informationHomemade Sanding Tools David Hoehns
Homemade Sanding Tools David Hoehns allskewedup@gmail.com 806 789 5108 My demonstration will focus on two types of homemade sanding devices, a foam ball sander that may be used for power sanding concave
More informationMission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
More informationNABTEB Past Questions and Answers - Uploaded online PAST QUESTIONS AND ANSWERS GENERAL METAL WORK MAY/JUNE 2009
PAST QUESTIONS AND ANSWERS GENERAL METAL WORK MAY/JUNE 2009 1a. Enumerate TWO safety measures each as regards the use of the following hand tools. 1. Scriber 2. Chisel 3. File 4. Try-square 1. Scriber:
More informationINDUSTRIAL QUALITY SINCE CALL , or VISIT for more information.
ALL- CIRCULAR SAW BLADE LINE-UP for more information. WOODWORKER SERIES BLADES FOR THE PROFESSIONAL WOODWORKER Century s Woodworker Series blades are manufactured to the highest standards of precision
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationVIEWpanel Technical Manual
VIEWpanel Technical Manual VIEWpanel is a prefabricated panel comprising 0.21 aluminium skin (1100 alloy) both sides, apart from our lite grade, which is 0.12 aluminium skin both sides and a polyethylene
More informationExtruded sheet (FF) #3 Other Methods of Cutting. Technical information. This brief gives advice for:
Technical information Extruded sheet (FF) WARNING: This product can expose you to chemicals including Ethyl acrylate, CAS 140-88-5, which are known to the State of California to cause cancer. For more
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationCutting Tools Overview #2 - Turning
Cutting Tools Overview #2 - Turning Last month's column was an overview of some of the different types of tools used in the milling process. This month we are going to discuss some of the most common cutting
More informationLecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing
Lecture 18 Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing For production of: Flat surfaces Grooves Notches Performed on long (on average 10 m) workpieces Workpiece moves / Tool
More informationHaley Hensley. Course: Structures. Unit Title: Woodworking. Materials: table saw, wood for cutting, safety glasses
Haley Hensley Course: Structures Unit Title: Woodworking Materials: table saw, wood for cutting, safety glasses I. Lesson Title a. Operation: Table Saw II. Situation a. Students are beginning the table
More informationTAPER-LOCK HANDLE SYSTEM
TAPER-LOCK HANDLE SYSTEM Patent Pending #61728762 FIRST EVER MADE The SB Tools Taper-Lock Handle System offers the versatility of a modular handle system without compromising strength, ease of use, or
More informationExploration of a Student Project in a Materials Processing Course
Paper ID #8093 Exploration of a Student Project in a Materials Processing Course Prof. Somnath Chattopadhyay, Georgia Southern University c American Society for Engineering Education, 2013 EXPLORATION
More informationHAND TOOLS. PILANA TOOLS s.r.o.
HAND TOOLS PILANA TOOLS s.r.o. Made in Czech Republic Garden saws 5254 Bow frame saw» universal bow frame saw for cutting dry and green wood» exchangeable blade 5244.1 for fresh/green wood or 5244.2 for
More informationMaking a Scalloped Segmented Pen Blank
Making a Scalloped Segmented Pen Blank Contributed by: Tim Spaulding A.K.A Tim Originally Published for the South Puget Sound Woodturners This tutorial was downloaded from http://www.penturners.org The
More informationCeltic door harp Necessary tools:
.004 Celtic door harp Necessary tools: Fretsaw Drill ø/5mm Sandpaper/ file Wood glue Side cutters Pencil,ruler Scissors Bradawl Double sided tape Machine vice Please Note The OPITEC range of projects is
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationMcCue Bumper Installation Instructions
McCue Bumper Installation Instructions McCue 8" Bumper Tools Required: Saw with 10-12" blade Tape measure Flat head screwdriver Phillips screw driver Pencil or chalk line Drill with Philips driver bit
More informationJig Saw Blades. Teeth (TPI) Color Code. Wood and Metal Cutting Jig Saw Blades. Progressor jig saw blades cut thin and thick material cleanly.
212 2012/2013 Power Tools & Accessories Catalog Jig Saw s Bosch understands the need to cut materials quickly, smoothly and precisely. The company s broad product offering cuts both conventional and specialized
More informationGET 20% OFF CIRCULAR SAW BLADE DISPLAYS + Adder
Revised 3-16-18 PROMOTIONAL BOOKLET NOW AVAILABLE, READY TO SHIP Expanded Blade Product Line ALL Woodworker Series, Construction Series, Fiber Cement and Metal Series blades available. ALL Vinyl Siding
More informationFUNDAMENTAL MANUFACTURING PROCESSES Plastics Machining & Assembly NARRATION (VO): NARRATION (VO): NARRATION (VO): INCLUDING: METALS,
Copyright 2002 Society of Manufacturing Engineers --- 1 --- FUNDAMENTAL MANUFACTURING PROCESSES Plastics Machining & Assembly SCENE 1. CG: Plastics Machining white text centered on black SCENE 2. tape
More informationCompany Profile & Capabilities
Company Profile & Capabilities Ameritex was founded in 2004 as an advanced technology custom fabricator providing laser cutting, punching, fabrication and machining all under one roof. Our 40,000 sqft
More informationEV 996 Precision Pulldown KAMA Bandsaw
EV 996 Precision Pulldown KAMA Bandsaw Why should you spend more money for our Italian designed and built Kama Bandsaw than an asian one you can get for a few hundred dollars less? Three reasons: 1. You
More informationFeatures. Special forms are possible
Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationEASTERN ARIZONA COLLEGE Machine Woodworking
EASTERN ARIZONA COLLEGE Machine Woodworking Course Design 2018-2019 Course Information Division Industrial Technology Education Course Number IAR 120 Title Machine Woodworking Credits 2-3 Developed by
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationBI-METAL BAND SAW BLADES
BI-MTAL BAND SAW BLADS PRODUCT RANG Types Range Grade of Steel APPLICATIONS l Steel l Stainless Steel l otic l High Alloy l Non - Ferrous Material l Aluminium l Cast Iron l l Width 6. mm, 1. mm, 13. mm,
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More information4/6 variable tooth configuration. Fleem ground teeth for longer life
Disston E127 E128 Notes Hole Saws Bi-Metal Hole Saws Large openings on the backing plate allow for quick removal of cut materials. The diamond-shaped sidewall cutouts increase visibility while cutting.
More informationThis manual is for Dake Johnson manufactured J & JH horizontal bandsaws from 1985 to current.
*** PLEASE NOTE**** This manual is for Dake Johnson manufactured J & JH horizontal bandsaws from 1985 to current. If your model is prior to 1985, please contact the factory for manual and parts information.
More informationLANGWT7 Build and use tools and devices for coppice and green wood products
Build and use tools and devices for coppice and green wood products Overview The standard covers the identification of essential parts to assemble tools and devices. It also covers the assembly and adjustment
More informationRegulator installation guide Air Arms S4xx/S5xx
Welcome to Huma-Air. We design and manufacture brand- and model specific precision regulators for PCP air rifles. By using only the highest quality materials such as aircraft grade aluminum, aluminumbronze,
More informationDESIGN CHALLENGE Submission Information Contact Information Submitting Categories. Ralf O. Schneider
DESIGN CHALLENGE 6 2017 1. Submission Information 1.1. Contact Information Ralf O. Schneider Assistant Professor, Industrial and Interaction Design Syracuse University, College of Visual and Performing
More informationPQ G-P01[ ].qxd 12/11/03 10:25 PM Page 1 Quark01 Quark01:BOOKS:PQ688-miller-2:Rep
PQ688-0893G-P01[001-026].qxd 12/11/03 10:25 PM Page 1 Quark01 Quark01:BOOKS:PQ688-miller-2:Rep Chapter 1 Benchwork The term benchwork relates to work performed by the mechanic at the machinist s bench
More informationChapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
More informationFITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
More informationManufacturer & Exporter of: Tube Cleaning Equipments such as Flexible Shafts, Brushes, Cutters, Tube Expanders, Construction Equipments Concrete
Manufacturer & Exporter of: Cleaning Equipments such as Flexible Shafts, Brushes, Cutters, Expanders, Construction Equipments Concrete Vibrators, Flexible shaft Grinders & Accessories. SERRATING / GROOVING
More informationMechanical Issues. January 4 th, Aaron Sokoloski
Mechanical Issues January 4 th, 2005 Aaron Sokoloski Agenda The Maslab Workshop Raw Materials Other Materials Fasteners Tools Safety & Maintenance Mechanical issues Motors Techniques Design Principles
More informationChapter 26 CHISELS HOW TO CHOOSE AND USE THEM TM 9-243
Chapter 26 CHISELS HOW TO CHOOSE AND USE THEM The Types and Uses section provides you with a list of some of the types of chisels. These pages should help you select the right chisel to do the job. The
More informationAn intro to CNC Machining
An intro to CNC Machining CNC stands for Computer Numeric Control. CNC machining involves using a machine controlled by a computer to machine material. Generally the machine is either a milling machine
More informationDANGER POWER UP. 1. Close saw hood 2. Reset safety kill line 3. Reset saw cabinet E-stop 4. Power up. Quick Reference Card TigerSaw
Quick Reference Card TigerSaw DANGER This machine can start, move, and stop automatically. Keep hands and loose clothing clear of moving parts while operating. Moving parts can crush and cut. When used
More informationDirectorate of Skill Development Madhya Pradesh. Detail of Machine Packages. Schedule of Machines Requirement (CoE-WB-VTIP)
Directorate of Skill Development Madhya Pradesh Detail of Packages Schedule of s Requirement (CoE-WB-VTIP) Package No-1 S.S. & S.C. Lathe 15 cm S.No. Particulars Qty. Rate Amount Mode of Name of ITI 1
More informationTOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
More informationCadillac Lathe Manual READ ONLINE
Cadillac Lathe Manual READ ONLINE Lathe Cadillac Industrial Equipment Consulting - Find Lathe Cadillac on sale here with the largest choice of Industrial Equipment Consulting Services & Sales. Cadillac
More informationPQ G-P01[ ].qxd 1/24/04 9:10 AM Page 1 Quark03 Quark03:Desktop Folder:REPRO-miller. Power Hacksaws, Power Band Saws, and Circular Saws
PQ722-0949G-P01[001-024].qxd 1/24/04 9:10 AM Page 1 Quark03 Quark03:Desktop Folder:REPRO-miller Chapter 1 Power Hacksaws, Power Band Saws, and Circular Saws Power hacksaws, power band saws, and circular
More informationSMF & MACHINE TOOLS, INC
SMF & MACHINE TOOLS, INC 800-643-5839 METAL WORKING EQUIPMENT Local 501-897-1110 Fax 501-897-1110 14824 Rockbridge Road Little Rock, AR 72206 www.smfmachinetools.com sales@smfmachinetools.com P II 0 IRONWORKER
More informationLoudon Industries, Inc. Facility List
Loudon Industries, Inc. Facility List 1 2 Thank you for your interest in Loudon Industries, Inc. We offer a diverse range of machining and engineering capabilities to satisfy our customers diverse requirements.
More informationSMF & MACHINE TOOLS, INC
SMF & MACHINE TOOLS, INC 800-643-5839 METAL WORKING EQUIPMENT Local 501-897-1110 Fax 501-897-1110 14824 Rockbridge Road Little Rock, AR 72206 www.smfmachinetools.com sales@smfmachinetools.com C. '..-...p
More informationTools of the Shop MEGR 2299
Tools of the Shop MEGR 2299 Machinery General Never wear long sleeves, never allow long hair to hang free. Always wear safety glasses. A cutting tool is usually an insert, drill bit, end mill, or device
More information11-1/4 OD at Transition Point. Microcosmic. 4th and Brannan Street Platform Station Project. Elevation. Moto Ohtake 2014
74 480 330 90 72 180 150 60 90 18 11- OD at Transition Point 36 184 74 Microcosmic Elevation 14 1 Moto Ohtake I. GENERAL NOTES: A. SCULPTURE DESIGN CRITERIA 1. CALIFORNIA BUILDING CODE (CBC, 2010 EDITION)
More information