PI3USB221. High-Speed USB2.0 1:2 Multiplexer/ DeMultiplexer Switch with Signal Enable
|
|
- Aldous Maxwell
- 5 years ago
- Views:
Transcription
1 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable Features Operation at 2.5 V and 3.3 V V I/O Accepts ignals up to 5.5 V 1.8-V Compatible Control-Pin Inputs Low-Power Mode When OE Is isabled (2 µa) r ON = 6Ω Maximum Δr ON = 0.2Ω Typical Cio(on) = 6 pf Maximum Low Power Consumption (50 µa Maximum) E > 8kV contact on UB signal path per IEC ) High Bandwidth (1.1 GHz Typical) Packaging (Pb-free & Green): - 10-contact, TFN (ZE10) - 10-contact, TLLGA (XA10) escription The PI3UB221 is a high-bandwidth switch specially designed for the switching of high-speed UB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited UB I/Os. The wide bandwidth (1.1 GHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a UB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed UB 2.0 (480 Mbps). Applications Routes ignals for UB 1.0, 1.1, and 2.0 Mobile Industry Processor Interface (MIPI) ignal Routing Pin Configuration TFN Package (Top View) TLLGA Package (Top View) TLLGA Package (Bottom View) V V OE OE - OE V 1 P /28/09
2 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable Block iagram CONTROL LOGIC OE Pin escription NAME ECRIPTION OE Active LOW, Output enable elect input COM port n I/O for UB data path (port 1 and port 2) Truth Table OE FUNCTION X H isconnect L L = 1 H L = 2 2 P /28/09
3 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable ABOLUTE MAXIMUM RATING 1 Over operating free-air temperature range (unless otherwise noted) upply Voltage Range V to 4.6V V IN Control Input Voltage Range 2, V to 7V V I/O witch I/O Voltage Range 2, 3, V to 7V I IK Control Input Clamp Current (V IN < 0)... 50mA I I/OK I/O Port Clamp Current (V I/O < 0)... 50mA I I/O ON-state witch Current 5... ±120mA Continuous current through or... ±100mA θ JA Package Thermal Impedance TLLGA Package C/W TFN Package C/W T stg torage temperature range to 150 C Notes: 1. tresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. All voltages are with respect to ground, unless otherwise specified. 3. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 4. VI and VO are used to denote specific conditions for VI/O. 5. II and IO are used to denote specific conditions for II/O. 6. The package thermal impedance is calculated in accordance with JE Recommended Operating Conditions 1 ymbol escription Parameter Min Max Unit upply voltage V IH High-level control input voltage = 2.3 V to 2.7 V = 2.7 V to 3.6 V V IL Low-level control input voltage = 2.3 V to 2.7 V 0.6 = 2.7 V to 3.6 V 0.6 V V I/O ata input/output voltage T A Operating free-air temperature C Note: 1. All unused control inputs of the device must be held at or to ensure proper device operation. 3 P /28/09
4 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable ELECTRICAL CHARACTERITIC Over operating free-air temperature range (unless otherwise noted) Parameter Testing Conditions Min Typ Max Unit V IK = 3.6V, 2.7V, I I = 18 ma 1.8 V Control I IN V Inputs = 3.6V, 2.7V, 0V, V IN = 0V to 3.6V ±1 I 3 = 3.6V, 2.7V, V IN = or, OZ ±1 V O = 0V to 3.6V, V I = 0V, witch OFF V I/O = 0V to 3.6V ±2 I (OFF) = 0V V I/O = 0 to 2.7V ±1 V I = 3.6V, 2.7V, V IN = or, CC 50 µa I I/O = 0 V, witch ON or OFF I CC (low power mode) = 3.6V, 2.7V, V IN = or, witch disabled, (OE in high state) 2 I CC 4 Control Inputs = 2.7V, sweeps from 1.4V to 3.3V, OE/ = 0V = 2.7V, OE/ sweeps from 1.4V to 3.3V, = 0V C IN Control Inputs = 3.3V, 2.5V, V IN = 3.3V or 0V 1 2 C io(off) = 3.3V, 2.5V, V IN = 3.3V or 0V, witch OFF 2 4 C io(on) = 3.3V, 2.5V, V IN = 3.3V or 0V, witch ON 5 6 r 5 ON = 3V, 2.3V V I = 0V, I O = 30 ma 6 V I = 2.4V, I O = 15 ma 6 r ON = 3V, 2.3V V I = 0V, I O = 30 ma 0.2 V I = 1.7V, I O = 15 ma 0.2 r ON(flat) = 3V, 2.3V V I = 0V, I O = 30 ma 1 V I = 1.7V, I O = 15 ma pf Ω Notes: 1. V IN and I IN refer to control inputs. VI, VO, II, and IO refer to data pins. 2. All typical values are at = 3.3 V (unless otherwise noted), T A = 25 C. 3. For I/O ports, the parameter IOZ includes the input leakage current. 4. This is the increase in supply current for each input that is at the specified TTL voltage level, rather than or. 5. Measured by the voltage drop between the input and output terminals at the indicated current through the switch. ON-state resistance is determined by the lower of the voltages of the two terminals. YNAMIC ELECTRICAL CHARACTERITIC over operating range, T A = 40 C to 85 C, = 3.3 V ± 10%, = 0V ymbol Parameter Test Conditions Typ 1 Unit X TALK Crosstalk R L = 50Ω, f = 250 MHz 40 db O IRR OFF isolation R L = 50Ω, f = 250 MHz 41 BW Bandwidth ( 3 db) R L = 50Ω 1.1 GHz Note: 1. For Max or Min conditions, use the appropriate value specified under Electrical Characteristics for the applicable device type. 4 P /28/09
5 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable WITCHING CHARACTERITIC over operating range, T A = 40 C to 85 C, = 3.3 V ± 10%, = 0V ymbol Parameter Min Typ 1 Max Unit t pd Propagation elay 2, t ON t OFF Line enable time Line disable time to, n 125 OE to, n 100 to, n 12 OE to, n 12 t K(O) Output skew between center port to any other port t K(P) kew between opposite transitions of the same output (tphl tplh) Notes: 1. For Max or Min conditions, use the appropriate value specified under Electrical Characteristics for the applicable device type. 2. pecified by design 3. The switch contributes no propagational delay other than the RC delay of the on resistance of the switch and the load capacitance. The time constant for the switch alone is of the order of 0.25 ns for 10-pF load. ince this time constant is much smaller than the rise/fall times of typical driving signals, it adds very little propagational delay to the system. Propagational delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interactions with the load on the driven side. ns 5 P /28/09
6 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable Application Information Figure 5: H Eye Test etup Test Result Test Result 1: High-speed, Up-stream, Near-end Eye of PI3UB221 6 P /28/09
7 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable PARAMETER MEAUREMENT INFORMATION TET R L C L V COM V IN 1 or 2 1 or 2 V OUT1 or V OUT2 C L (2) R L t ON t OFF 500-Ohm 500-Ohm 50 pf 50 pf V V Logic Input (1) C L (2) R L Logic Input (V I ) 1.8 V 0 witch Output (V OUT1 or V OUT2 ) t ON t OFF 90% 90% V OH V OL (1) All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, Z O = 50-Ohm, t r < 5 ns, t f < 5 ns. (2) C L includes probe and jig capacitance. Turn-On (t ON ) and Turn-Off Time (t OFF ) Network Analyzer ource ignal 50-Ohm 50-Ohm V OUT1 1 2 VIN Channel OFF: 1 to = or Network Analyzer etup 50-Ohm ource Power = 0 dbm (632-mV P-P at 50-Ohm load) C Bias = 350 mv OFF Isolation (O IO ) 7 P /28/09
8 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable PARAMETER MEAUREMENT INFORMATION (continued) Network Analyzer 50 V OUT1 1 Channel ON: 1 to Channel OFF: 2 to ource ignal 50 V OUT2 2 V IN 50 = or Network Analyzer etup ource Power = 0 dbm (632-mV P-P at 50- load) C Bias = 350 mv Figure 11. Crosstalk (X TALK ) Network Analyzer 50 V OUT1 1 Channel ON: 1 to ource ignal 2 VIN = or Network Analyzer etup 50 ource Power = 0 dbm (632-mV P-P at 50- load) C Bias = 350 mv Figure 12. Bandwidth (BW) 400 mv Figure 13. Propagation elay 8 P /28/09
9 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable PARAMETER MEAUREMENT INFORMATION (continued) Input t PLH t PHL V OH Output t = t t K(P) PHL PLH V OL K(P) Input t PLH1 t PHL1 V OH t K(O) V OL t K(O) V OH V OL t PLH2 t PHL2 t = t t K(O) PLH1 PLH2 or t t PHL1 PHL2 K(P) Figure 14. kew Test V OUT1 1 V OUT2 2 V IN Channel ON r on V IN V OUT2 or V OUT1 I IN I IN = V IH or V IL Figure 15. ON-tate Resistance (r on ) 9 P /28/09
10 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable PARAMETER MEAUREMENT INFORMATION (continued) V OUT1 1 V OUT2 2 V IN OFF-tate Leakage Current Channel OFF = V IH or V IL Figure 16. OFF-tate Leakage Current V OUT1 1 Capacitance Meter V BIA V OUT2 V IN 2 V BIA = or = or Capacitance is measured at 1, 2,, and inputs during ON and OFF conditions. Figure 17. Capacitance 10 P /28/09
11 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable ATE: 01/26/ ECRIPTION: 10-Lead, Thin Leadframe Land Grid Array (TLLGA) Note: For latest package info, please check: PACKAGE COE: XA10 OCUMENT CONTROL #: P-2095 REVIION: P /28/09
12 High-peed UB2.0 1:2 Multiplexer/ emultiplexer witch with ignal Enable ATE: 10/22/ Note: For latest package info, please check: ECRIPTION: 10-pin, Very Thin Fine Pitch ual Flat No Lead (TFN) PACKAGE COE: ZE (ZE10) OCUMENT CONTROL #: P-2092 REVIION: A Ordering Information (1-3) Ordering Code Package Code Package escription PI3UB221XAE XA 10-Contact, Pb-free and Green (TLLGA) PI3UB221ZEE ZE 10-Contact, Pb-free and Green (TFN) Notes: 1. Thermal characteristics can be found on the company web site at 2. E = Pb-free and Green 3. Adding an X suffix = Tape/Reel Pericom emiconductor Corporation P /28/09
PI3USB221. Features. Applications. Pin Configuration. TDFN Package (Top View) A product Line of Diodes Incorporated
High-peed UB2.0 1:2 Multiplexer/eMultiplexer witch with ignal Enable Features V Operation at 2.5 V and 3.3 V V I/O Accepts ignals up to 5.5 V 1.8-V Compatible Control-Pin Inputs Low-Power Mode When OE
More informationPI3USB10LP-A. USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications. Description. Features.
Features USB 2.0 compliant (high speed and full speed) R ON is 5.5Ω typical @ V CC = 3.0V Low bit-to-bit skew Low Crosstalk: 40dB @ 500 Mbps Off Isolation: 35dB @ 500 Mbps Near-Zero propagation delay:
More informationPI3L V Quad, 2:1 Mux/DeMux Fast Ethernet LAN Switch w/ Single Enable. Description. Features. Applications. Pin Configuration.
Features R ON is 4Ω typical Low crosstalk: 27dB @ 250 MHz Near-Zero propagation delay: 250ps Switching speed: 9ns Channel On capacitance: 9pF (typical) Operating Range: +3.0V to +3.6V >2kV ESD protection
More informationSGM7228 Low Cost, High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7228 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7228 is designed for the switching of high-speed
More informationPI3V312. Low On-Resistance, 3.3V High-Bandwidth 4-Port, 2:1 Mux/DeMux VideoSwitch. Features. Description. Block Diagram. Pin Configuration S 1 Y A 4
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (500MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 1.8V, 2.5V and 3.3V supply
More informationFSUSB22 Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch
March 2008 FSUSB22 Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Features -40dB Off Isolation at 250MHz -40dB Non-adjacent Channel Crosstalk at 250MHz On Resistance: 4.5Ω Typical (RON) -3dB Bandwidth:
More informationPI3USB V, USB 2.0 High-Speed Signal Switch w/ Low THD Channels for Audio Signals. Features. Pin Description. Truth Table
w/ Low THD Channels for Audio Signals Features Bandwidth for USB ports > 1.2Gbps Low THD for Audio ports < 0.02% ESD > 2kV HBM Low I CC = 800µA Wide V CC operating range: 2.7V to 4.2V ±10% Packaging: Pb-free
More informationFSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch
FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Features 30dB off isolation at 250MHz 30dB non-adjacent channel crosstalk at 250MHz 4.5Ω typical on resistance (R ON ) 3dB bandwidth: >720MHz Low
More informationPI3C V/3.3V, High Bandwidth, Hot Insertion 10-Bit, 2-Port, Bus Switch
2.5V/3., High Bandwidth, Hot Insertion Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth (>400 MHz) Permits Hot Insertion. Rail-to-Rail, 3. or 2.5V ing 5V I/O
More informationSGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7222 is designed for the switching of high-speed
More informationPI3DBS V High Speed 2 : 4 Differential Mux/Demux
3.3V High Speed 2 : 4 Differential Mux/Demux Features ÎÎ2:4 Differential Multiplexer/Demultiplexer ÎÎBidirectional Operation ÎÎCan be used in à à Single :4 Configuration à à Dual :2 Configuration à à Fan
More informationPI3L V, Wide Bandwidth, Quad 2:1 Mux/DeMux LAN Switch
Features Replaces Mechanical Relays High-performance, Low-cost solution for switching between different LAN ignals Ultra-low Quiescent Power (0.1µA typical) Low Crosstalk: 100dB @ 10 MHz Low Insertion
More informationPI3CH200 2-Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
2-Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail
More informationPI5C3384 PI5C3384C. 10-Bit, 2-Port Bus Switch
PI5C3384 PI5C3384C 0-Bit, 2-Port Bus Switch Features: Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra-low quiescent power (0.2μA typical)
More informationPI3V514. Low On-Resistance, 3.3V High-Bandwidth 5-port, 4:1 Mux/DeMux VideoSwitch. Description. Features. Pin Configuration.
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (400 MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 2.5V and 3.3V supply voltage
More informationDescription IA 3 IA 2 IA 1 GND. Truth Table (1) H X X Hi-Z Disable S 0-1. L L L I0 S1-0 = 0 L L H I1 S1-0 = 1 Y A to Y B
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (300MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 2.5V and 3.3V supply voltage
More informationPI3V314. Low On-Resistance, 3.3V High-Bandwidth 3-Port, 4:1 Mux/DeMux VideoSwitch. Features. Description. Pin Configuration.
3-Port, 4:1 Mux/DeMux VideoSwitch Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (375MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V
More informationPI3CH Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Features Description Near-Zero propagation delay 5-ohm switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching
More informationUNISONIC TECHNOLOGIES CO., LTD
U74CBT3257 4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER UNISONIC TECHNOLOGIES CO., LTD CMOS IC DESCRIPTION The U74CBT3257 is a 4-bit 1-of-2 high-speed TTL-compatible FET multiplexer/demultiplexer. The low
More informationPI3C V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch. Description. Features. Pin Configuration. Block Diagram.
Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth Operation (>400 MHz) Permits Hot Insertion 5V I/O Tolerant Rail-to-Rail 3.3V or 2.5V Switching 2.5V Supply Voltage
More informationPI2DBS GHz, Differential Broadband Signal Switch, 2-Differential Channel, 2:1 Mux/DeMux Switch
Features SAS, SATA2, XAUI Switch 2 Differential Channel, 2:1 Mux/DeMux Bandwidth of 2.0 GHz (3dB) Low Bit-to-Bit Skew :
More informationA product Line of Diodes Incorporated. Description. Applications. Truth Table. Note: 1. IEC
2:1 Mux/DeMux Gigabit Ethernet LAN Switch with Power-down Mode Features 1:2 Gigabit LAN Switch Power-down support Low bit-to-bit skew: 200ps Very Low Crosstalk: 75dB @ 250MHz Status Indicator LEDs Switched
More informationPI3CH360 3-Channel 2:1 Mux/DeMux, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching - 0 to 5V switching
More informationPI3CH360. Low Voltage, High-Bandwidth, 3-Channel 2:1 Mux/DeMux, NanoSwitch. Features. Description. Block Diagram. Pin Configuration.
Low Voltage, High-Bandwidth, 3-Channel 2:1 Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching 5V I/O tolerant
More informationPI5C Bit Bus Switch with Individual Enables A 1 B 1 GND. Features. Description. Pin Configuration. Block Diagram.
2-Bit Bus Switch with Individual Enables Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra Low Quiescent Power (0.2μA typical)
More informationCBTS3306 Dual bus switch with Schottky diode clamping
INTEGRATED CIRCUITS Dual bus switch with Schottky diode clamping 2001 Nov 08 File under Integrated Circuits ICL03 FEATURES 5 Ω switch connection between two ports TTL-compatible input levels Package options
More informationPI3C3126. Description. Features. 14-Pin Configuration. Applications. Block Diagram. 16-Pin Configuration. Truth Table (1) Pin Description.
2./3.3, High Bandwidth, Hot Insertion,4-Bit, 2-Port Bus Switch with Individual Enables Features Near-Zero propagation delay -ohm switches connect inputs to outputs High Bandwidth (>400 MHz) 2./3.3 Supply
More informationPI5C3253. Dual 4:1 Mux/DeMux Bus Switch
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON ESD Protection up to 2kV HBM Ultra Low Quiescent Power (0.2μA typical) Ideally suited
More informationPI3USB223. USB 2.0 High-Speed and Audio Switches with Negative Signal Capability D+/R D-/L V DD ASEL GND VBUS. Description. Features.
with Negative Signal Capability Features Single +2.7V to +4.4V Supply Voltage Low 50µA Supply Current -3dB Bandwidth: 1500MHz (typ) Low 2.5Ω(typ)On-Resistance THD+N: 0.02% Shorting D+/R and D-/L to Vbus
More informationCBTD3257 Quad 1-of-2 multiplexer/demultiplexer with level shifting
INTEGRATED CIRCUITS 2002 Sep 09 FEATURES 5 Ω switch connection between two ports TTL-compatible input levels Designed to be used in level shifting applications Minimal propagation delay through the switch
More informationCMOS Low Voltage 2.5 Ω Dual SPDT Switch ADG736L
CMO Low Voltage 2.5 Ω ual PT witch AG736L FEATURE 1.8 V to 5.5 V single supply 2.5 Ω (typical) on resistance Low on-resistance flatness Guaranteed leakage performance over 40 C to +85 C 3 db bandwidth
More informationCBTS3253 Dual 1-of-4 FET multiplexer/demultiplexer with Schottky diode clamping
INTEGRATED CIRCUITS 2002 Nov 06 Philips Semiconductors FEATURES 5 Ω switch connection between two ports TTL-compatible input levels Schottky diodes on I/O clamp undershoot Minimal propagation delay through
More informationPI5C3384 PI5C3384C PI5C32384 (25Ω)
PI5C3384 PI5C3384C PI5C32384 (25Ω) 0-Bit, 2-Port Bus Switch Features: Near-Zero propagation delay Low noise, 25Ω version (PI5C32384) 5Ω switches connect inputs to outputs (PI5C3384) Direct bus connection
More informationPI3PCIE V, PCI Express 3.0, 1-Lane, 2-Channel, 8Gbps, 2:1 Mux/DeMux Switch w/ Single Enable
Features ÎÎ2 Differential Channel, 2:1 Mux/DeMux ÎÎPCI Express 3.0 performance, 8.0Gbps ÎÎBi-directional operation ÎÎ3dB Bandwidth: 8.1GHz ÎÎLow Bit-to-Bit Skew, 10ps max ÎÎLow channel-to-channel skew:
More informationCMOS ±5 V/+5 V, 4 Ω Dual SPST Switches ADG621/ADG622/ADG623
CMO ±5 V/+5 V, 4 Ω ual PT witches AG62/AG622/AG623 FEATURE 5.5 Ω (maximum) on resistance.9 Ω (maximum) on resistance flatness 2.7 V to 5.5 V single supply ±2.7 V to ±5.5 V dual supply Rail-to-rail operation
More informationPI3PCIE V, PCI Express Lane, (4-Channel), Differential Mux/Demux with Bypass. Features. Description. Truth Table
3.3V, PCI Express 3.0 2-Lane, (4-Channel), Differential Mux/Demux with Bypass Features ÎÎ8 Differential Channel SPST switch with Mux/DeMux option ÎÎPCIe 3.0 performance ÎÎBi-directional operation ÎÎLow
More informationFST Bit Low Power Bus Switch
2-Bit Low Power Bus Switch General Description The FST3306 is a 2-bit ultra high-speed CMOS FET bus switch with TTL-compatible active LOW control inputs. The low on resistance of the switch allows inputs
More informationPI5A3167C Low Voltage SPST 0.8Ω Analog Switch
Features Description CMO Technology for us and nalog pplications Low On-Resistance: 0.8Ω at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail ignal Range Control Input Overvoltage Tolerance: 5.5V Fast Transition
More informationPI5C3253. Dual 4:1 Mux/DeMux Bus Switch
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra Low Quiescent Power (0.2µA typical) Ideally suited for notebook applications
More informationFSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch
Click to see this datasheet in Simplified Chinese! FSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch Features Low On Capacitance: 3.7pF (Typical) Low On Resistance: 6.5Ω (Typical) Low Power
More informationPI5C16861 PI5C (25Ω) 20-Bit, 2-Port Bus Switch
PI5C8 PI5C28 (25Ω) Features Near-Zero propagation delay 5Ω or 25Ω switches connect inputs to outputs Direct bus connection when switches are ON 32X384 function with flow through pinout make board layout
More informationIn data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
More informationPI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
More informationPI5C Bit, 2-Port Bus Switch. Features. Description. Pin Configuration. Block Diagram. Pin Description. Truth Table (1) Pin Name Description
Features ÎÎNear-Zero propagation delay ÎÎ5-ohm switches connect inputs to outputs ÎÎDirect bus connection when switches are on ÎÎUltra Low Quiescent Power (0.2μA typical) Ideally suited for notebook applications
More informationFST Bit Bus Switch
Features 4 Ω Switch Connection between Two Ports Minimal Propagation Delay through the Switch Low I CC Zero Bounce in Flow-through Mode Control Inputs Compatible with TTL Level Description December 2012
More informationCMOS Low Voltage 2.5 Ω Dual SPDT Switch ADG736
ata heet FEATURE 1.8 V to 5.5 V single supply Automotive temperature range: 40 C to +125 C 2.5 Ω (typical) on resistance Low on resistance flatness 3 db bandwidth > 200 MHz Rail-to-rail operation 10-lead
More informationFSUSB63 3:1 High-Speed USB 2.0 Switch / Multiplexer
July 2013 FSUSB63 3:1 High-Speed USB 2.0 Switch / Multiplexer Features Switch Type 3:1 USB Switch USB USB 2.0 High-Speed & Full-Speed Compliant Break-Before-Make Time 126µs R ON 6Ω Typical C ON 6pF Typical
More informationPI2PCIE V, PCI Express Gen2 Compliant, 4-Differential Channel, 2:1 Mux/DeMux Switch
Features 4 Differential Channel, 2:1 Mux/DeMux PCI Express, Gen 2 Performance, 5.0Gbps Low Bit-to-Bit Skew, 7ps max (between '+' and '-' bits) Low Crosstalk: -23dB@3 GHz Low Off Isolation: -23dB@3 GHz
More informationDescription. Features. Application. Pin Assignment. Pin Description. Logic Function Table PI5A3158B
Low oltage Dual SPDT Analog Switch 2:1 Mux/Demux Bus Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 8Ω at 3.0 Wide Range: 1.65 to 5.5 Rail-to-Rail Signal Range Control
More informationPI6CL V/1.5V, 200MHz, 1:4 Networking Clock Buffer. Features. Description. Pin Description
Features High-speed, low-noise, non-inverting 1:4 buffer Maximum Frequency up to 200 MHz Low output skew < 100ps Low propagation delay < 3.5ns Optimized duty cycle 3.3 tolerent input 1.2 or 1.5 supply
More informationDescription. Applications
2:1 MIPI 4-Data Lane Switch Features ÎÎ4-lane, 2:1 switches that support DHY ÎÎData rate: 2. Gbps ÎÎSupports 2:1 clock differential signal ÎÎ-3 db Bandwidth: 4. GHz Typical ÎÎLow Crosstalk: -30 db@1.2
More informationINTEGRATED CIRCUITS. HSTL bit to 18-bit HSTL-to-LVTTL memory address latch. Product data 2001 Jun 16
INTEGRATED CIRCUITS 9-bit to 18-bit HSTL-to-LVTTL memory address latch 2001 Jun 16 FEATURES Inputs meet JEDEC HSTL Std. JESD 8 6, and outputs meet Level III specifications ESD classification testing is
More informationPI74STX2G Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply Voltage. Features. Description. Block Diagram
2-Bit Level Shifting Buffer/Transceiver with Features Operation Voltage: 1.65V V DDA 3.6V 2.3V V DDB 5.5V V DDA V DDB High Speed: tpd = 5ns typical into 30pF @ 3V V DD Power down high-impedance inputs
More informationPI3C3305/PI3C3306. Features. Description. Applications. PI3C3306 Block Diagram. PI3C3305 Block Diagram. PI3C Pin Configuration
2.5V/3., High-Bandwidth, Hot-Insertion, 2-Bit, 2-Port Bus Switch w/ Individual Enables Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High Bandwidth (>400 MHz) Rail-to-Rail,
More informationPI3VeDP212 2-lane DisplayPort Switch/Mux for DP Driven Panels with Triple Control Pins
Features 2 Differential Channel, 2:1 mux/demux that will support 2.7Gbps or 1.62Gbps DP signals 1-differential channel is used for AUX signaling Insertion Loss for high speed channels @ 2.7 Gbps: -1.5dB
More informationPI3HDMI412FT. 4-Differential Channel, 2:1 Mux/DeMux, DVI/HDMI Compliant Signal Switch with Flow-through Pin Out
Features 4-Differential Channel 2:1 Mux/DeMux DVI, HDMI rev 1.1, and HDMI rev 1.2 signal compatible -3dB BW = 1.5 GHz (3.0Gbps) Crosstalk: -35dB@1.65Gbps Switching speed: 4ns Isolation: -37dB@1.65Gbps
More informationPI5C32X384/32X384C. 20-Bit, 2-Port Bus Switch. Features. Description. Pin Configuration. Block Diagram. Pin Description
PI5C32X384/32X384C Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra-low quiescent power 32X384 (0.2µA typical) Ideally suited
More informationUNISONIC TECHNOLOGIES CO., LTD U74CBTLV3125
UNISONIC TECHNOLOGIES CO., LTD U74CBTLV3125 LOW-VOLTAGE QUADRUPLE FET BUS SWITCH DESCRIPTION The U74CBTLV3125 quadruple FET bus switch features independent line switches. Each switch is disabled when the
More informationA product Line of Diodes Incorporated. Description EN S 1 IA 3 IA 2 IA 1 GND. Note: 1. N.C. = No internal connection.
Low Voltage, High Bandwidth, USB 2.0, 4:1 Mux/DeMux with Single Enable Features ÎÎNear-Zero propagation delay ÎÎ5Ω switches connect inputs to outputs ÎÎHigh signal passing bandwidth (-3dB BW is 815MHz)
More informationPI5V330S. Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux. Features. Description. Block Diagram. Pin Configuration.
Features High-performance solution to switch between video sources Wide bandwidth: 570 MHz (typical) Low On-Resistance: 5Ω (typical) Low crosstalk at 10 MHz: 80dB Ultra-low quiescent power (0.1µA typical)
More informationPI5V330A. Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux. Features: Description. Pin Diagram. Block Diagram. Pin Description.
Features: High-performance solution to switch between video sources Wide bandwidth: >360 MHz Low On-Resistance: 3Ω Low crosstalk at 0 MHz: 58dB Ultra-low quiescent power (0.µA typical) Single supply operation:
More informationHSTL bit to 18-bit HSTL to LVTTL memory address latch with 12 kohm pull-up resistor INTEGRATED CIRCUITS
INTEGRATED CIRCUITS 9-bit to 18-bit HSTL to LVTTL memory address latch with 12 kohm pull-up resistor Supersedes data of 2001 Jul 19 2004 Apr 15 FEATURES Inputs meet JEDEC HSTL Std. JESD 8 6, and outputs
More informationPI3VDP Lane DisplayPort Rev 1.2 Compliant Switch. Description. Features. Application. Block Diagram
Features ÎÎ2-lane, 1:2 mux/demux that will support RBR, HBR1, or HBR2 ÎÎ1-channel 1:2 mux/demux for DP_HPD signal ÎÎ1-differential channel 1:2 mux/demux for DP_Aux signal with support up to 720Mbps ÎÎInsertion
More informationFST Bit Bus Switch
24-Bit Bus Switch General Description The Fairchild Switch FST16211 provides 24-bits of highspeed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows inputs to be connected to
More informationCBT bit 1-of-2 multiplexer/demultiplexer with precharged outputs and Schottky undershoot protection for live insertion
INTEGRATED CIRCUITS 16-bit 1-of-2 multiplexer/demultiplexer with precharged outputs and Schottky undershoot protection for live insertion 2000 Jul 18 FEATURES 5 Ω typical r on Pull-up on B ports Undershoot
More informationLC 2 MOS Precision 5 V Quad SPST Switches ADG661/ADG662/ADG663
a FEATURE +5 V, 5 V Power upplies Ultralow Power issipation (
More informationCMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux in Chip Scale Package ADG784
a FEATURE Low Insertion Loss and On Resistance: 4 Typical On-Resistance Flatness 2 MHz ingle 3 V/5 upply Operation Rail-to-Rail Operation Very Low istortion:
More information±15 V/12 V Quad SPST Switches ADG1311/ADG1312/ADG1313
±5 V/2 V Quad PT witches AG3/AG32/AG33 FEATURE 33 V supply range Fully specified at +2 V, ±5 V 3 Ω on resistance No VL supply required 3 V logic-compatible inputs Rail-to-rail operation 6-lead TOP and
More informationFSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch
FSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch Features -40dB Off Isolation at 30MHz -60dB Non-Adjacent Channel Crosstalk at 30MHz 3dB Bandwidth: 1.1GHz On Resistance: 4.5 (Typical) Low Power
More informationPI5A3158B Low Voltage Dual SPDT Analog Switch 2:1 Mux/Demux Bus Switch
2:1 Mux/Demux Bus Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 8Ω at 3.0 Wide Range: 1.65 to 5.5 Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5(Min)
More informationDescription. Applications
8-Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Features Description - - Applications Pin Configuration Block Diagram TSSOP QSOP TQFN Pin Description Pin No Pin Name Description 19
More informationPI3HDMI412-B. 4-Differential Channel, 2:1 Mux/DeMux, DVI/HDMI Compliant Signal Switch based on TMDS Signaling Standard
Compliant Signal Switch based on TMDS Signaling Standard Features 3.3V 4-Differential Channel 2:1 Mux/DeMux DVI, HDMI, 1.2 +1.2 signal compatible Data Rate: 1.65Gbps Supports both AC coupled and DC coupled
More informationINTEGRATED CIRCUITS. CBT3245 Octal bus switch. Product specification Supersedes data of 1998 Dec Jun 19
INTEGRATED CIRCUITS Supersedes data of 1998 Dec 8 2000 Jun 19 FEATURES Standard 245-type pinout 5 Ω switch connection between two ports TTL compatible control input levels Package options include plastic
More informationFeatures. Description. Pin Configuration. Block Diagram. Truth Table (1) PI3CH480. TSSOP/QSOP Top View. UQFN3x3-16 Top View
4-Channel 2:1 Mux/DeMux, Enable Low 1.8V / 2.5V / 3.3V, High-Bandwidth, Hot Plug Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond
More informationPI2PCIE2422. PCI Express Gen II Compliant, 8-Differential Channel Switch with 8:4 Mux/DeMux Option. Features. Description. Truth Table.
Features 8 Differential Channel SPST switch with Mux/DeMux option PCI Express Gen II performance Low Bit-to-Bit Skew: 10ps (between +/- signals) Low Crosstalk: -15dB @ 3.0 GHz Low Off Isolation: -26db
More informationBCT4222B BCT4222B. High-Speed DPDT Analog Switch. General Description. Features. Connection Diagram. Applications
BCT4222B Features V CC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.05 (TYP) ON-Resistance Flatness: 0.08 (TYP) High Off Isolation: 57dB at 10MHz 54dB (10MHz) Crosstalk
More information0.28 Ω CMOS 1.65 V to 3.6 V Single SPST Switches in SC70 ADG841/ADG842
.28 Ω CMO 1.65 V to 3.6 V ingle PT witches in C7 FEATURE Ultralow on resistance.28 Ω typical.48 Ω max at 125 C Excellent audio performance, ultralow distortion.25 Ω typical.52 Ω max RON flatness 1.65 V
More informationFSAV MHz, 4-Channel, 2:1 Video Switch
Features -50dB Off Isolation at 30MHz -80dB Non-Adjacent Channel Crosstalk at 30MHz 3dB Bandwidth: 800MHz On Resistance: 4 (Typical) Low Power Consumption: 1µA (Maximum) Control Input TTL Compatible Applications
More informationDescription D2+A D2-A D3+A D3-A D0+B D0-B D1+B D1-B D2+B D2-B D3+B D3-B AUX+ A AUX- A HPD A CAB_DETA/LEDA AUX+ B AUX- B HPD B CAB_DETB/LEDB
High Bandwidth 6-differential Channel, 1:2 Demux Features 4 Differential Channel, 1:2 DeMux that will support 2.7Gbps DP rev 1.1a signals 1-channel 1:2 demux for DP_HPD signal 1-differential channel 1:2
More informationFSSD07 1-Bit / 4-Bit SD/SDIO and MMC Dual-Host Multiplexer
March 2012 FSSD07 1-Bit / 4-Bit SD/SDIO and MMC Dual-Host Multiplexer Features On Resistance: 5Ω Typical, V DDC =2.7V f toggle : >75MHz Low On Capacitance: 6pF Typical Low Power Consumption: 2µA Maximum
More informationBCT4222B 350MHz DPDT Analog Switch
BCT4222B 350MHz DPDT Analog Switch Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.04 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off Isolation: 58dB at
More informationFSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input
April 2003 Revised July 2004 FSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input General Description The FSAT66 is a high speed single pole/single throw normally
More informationFST32X Bit Bus Switch
FST32X245 16-Bit Bus Switch General Description The Fairchild Switch FST32X245 provides 16-bits of high speed CMOS TTL-compatible bus switching in a standard flow-through mode. The low On Resistance of
More informationPI6C V/3.3V, 500 MHz Twelve 2-to-1 Differential LVPECL Clock Multiplexer. Description. Features. Block Diagram.
LVPECL Clock Multiplexer Features Pin-to-pin compatible to ICS85352I F MAX 500 MHz Propagation Delay < 4ns Output-to-output skew < 100ps 12 pairs of differential LVPECL outputs Selectable differential
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/doublethrow (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer
More informationFSHDMI04 Wide-Bandwidth Differential Signaling HDMI Switch
Click to see this datasheet in Simplified Chinese! Wide-Bandwidth Differential Signaling HDMI Switch Features 1.65 Gbps throughput 8kV ESD protection -26dB non-adjacent channel crosstalk at 825MHz Isolation
More informationFSUSB43 Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch
FSUSB43 Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch Features Over-Voltage Tolerance (OVT) on all USB Ports up to 5.25V without External Components Low On Capacitance: 3.7pF Typical Low On
More informationDescription. Features. Pin Assignment. Function Block Diagram. Pin Description PI4ULS5V102
PI4ULS5102 2-Bit Universal Bi-directional Level Shifter with Automatic Direction Control & Advance Package Solution Features 1.2 to 3.6 on A Port and 1.65 to 5.5 on B Port (CCA CCB) CC Isolation Feature
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GENERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/ DeMux) designed to operate from a single 2.7V to 5.5V power supply. This 2-channel
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer
More informationFSA3031 Dual High-Speed USB2.0 with Mobile High-Definition Link (MHL )
FSA3031 Dual High-Speed USB2.0 with Mobile High-Definition Link (MHL ) Features Low On Capacitance: 4.6 pf/6.75 pf MHL/USB (Typical) Low Power Consumption: 30 μa Maximum Supports MHL Rev. 2.0 Passes 1080
More informationFSUSB45 High-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect
July 2013 FSUSB45 High-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect Features Low On Capacitance: 7.0 pf Typical Low On Resistance: 3.9 Ω Typical Low Power Consumption: 1 μa Maximum
More informationFST Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch
September 1997 Revised November 2000 FST16233 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch General Description The Fairchild Switch FST16233 is a 16-bit to 32-bit highspeed CMOS TTL-compatible
More informationCMOS 1.8 V to 5.5 V, 2.5 2:1 MUX/SPDT Switch in SC70 Package ADG749
a FEATURE 1.8 V to 5.5 ingle upply 5 (Max) On Resistance.75 (Typ) On Resistance Flatness Automotive Temperature Range: 4 C to +125 C 3 db Bandwidth > 2 MHz Rail-to-Rail Operation 6-Lead C7 Package Fast
More informationFSA321 USB2.0 Hi-Speed (480Mbps) and Audio Switches with Negative Signal Capability and Built-in Termination on Unselected Audio Paths
March 2013 FSA321 USB2.0 Hi-Speed (480Mbps) and Audio Switches with Negative Signal Capability and Built-in Termination on Unselected Audio Paths Features Audio: 1.8 Typical On Resistance HS-USB: 8 Typical
More informationPO3B402A. High Bandwidth Potato Chip OE1 Y1+ Y1- GND SEL3 SEL1 D3- D3+ OE2 Y2+ Y2- Y3+ M3- M3+ OE3 SEL2 OE3 Y3+ Y3- SEL3 OE4 Y4+ Y4- SEL4
FEATURES: Patented technology High signal -3db passing bandwidth at GHz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally suited for low power applications Industrial
More information74F257A Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State)
INTEGRATED CIRCUIT Quad 2-line to 1-line selector/multiplexer, non-inverting (3-tate) 1995 Mar 31 IC15 Data Handbook Philips emiconductors (3-tate) FEATURE Industrial range available ( 40 C to +85 C) Multifunction
More informationPI3USB V USB 3.0 SuperSpeed Dual 2:1 Mux/DeMux Switch with Enable. Description. Features. Application Routing USB 3.0 SuperSpeed signals.
Features Dual 2:1 USB 3.0 Switch Bi-directional Operation 5 Gbps Performance Very high -3 db bandwidth: 8.2 GHz Low Insertion Loss: -1dB @ 2.5 GHz Excellent Return Loss: -29 db @ 2.5 GHz Low Crosstalk:
More informationFeatures. Applications
PRELIMINARY DATASHEET IDTHS421V16 Description The IDTHS421V16 is a bi-directional, low power, Quad single-pole, double-throw (SPDT) hybrid switch targeted at dual SIM card multiplexing. It is optimized
More informationFSUSB73 3:1 High-Speed USB Multiplexer and Hub Routing Switch
April 2012 FSUSB73 3:1 High-Speed USB Multiplexer and Hub Routing Switch Features Switch Type 3:1 MUX + Isolation Switch USB USB 2.0 High-Speed & Full-Speed Compliant R ON 6.5Ω C ON ESD (IEC61000-4-2)
More information