Gautam Buddha University

Transcription

1 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida Website : BID FORM FOR THE PROCUREMENT OF NETWORK THEORY LABORATORY ITEMS FOR THE SCHOOL OF ENGINEERING Tender Bid : Network Theory Lab. Items_SoE Page 1

2 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida Tender Procurement of Network Theory Laboratory items for School of Engineering Opening Date 30 th September 2012 Closing Date & Time 20 th October 2012 upto Noon Last date & Time of Bid Submission Technical Bid Opening Date, Time & Place Earnest Money Deposit Tender Fee Completion Period 20 th October 2012 upto 1:30 p.m. 22 nd October 2012 on a.m. Venue : Conference Room of the Registrar Office, 1 st Floor, Administrative Building, G.B.U., Gr. Noida. (Bidder/authorized representative of bidders may attend the bid opening proceedings on the above mentioned day and time). 2% of total quoted value (Refundable) Rs (Non-refundable) Within 6 weeks from the date of Purchase Order issued Bid System Two Tier : 1) Technical Bid 2) Financial Bid Technical Bid Shall Contain Financial Bid i. Technical specifications of each items ii. All documents in support of commercial terms & conditions and eligibility criteria. iii. Bidders Performa. iv. Tender Fee by way of demand drafts / pay orders only. v. EMD by way of F.D.R./B.G. only. The Financial Bid shall contain rate schedule only. The price shall be in words as well as in numeric numbers. Tender Bid : Network Theory Lab. Items_SoE Page 2

3 Gautam Buddha University (Established by the Uattar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida TECHNICAL BID (BIDDER S PROFORMA) (To be submitted in separate envelope) 1. Name of the firm/company : 2. Date of incorporation/registration Name of the firm/company Government Company / Public Ltd. / Private Ltd. / Partnership / Proprietorship : 4. Specify the number of years in this line of activity by the company: Sales Tax/VAT registration No. (please enclose certificate) :. 6. Experience (in year) of supplying & installation of similar software to IITs, NIT s or Central Universities or any Academic Institute of National Repute (please enclose certificate/p.o.) : Turnover in the last three financial years (Figures should be in Indian Rupees in Lakhs; please attach the certified copies of balance sheet with trading, profit & loss account) : (if the figures for are not available then they may furnish financial statement of year 08-09) Provide the postal address, telephone & fax numbers, and address of the nearest service center : Mention delivery period from the date of the placement of an official purchase order : Enclose the list of customers to whom you have supplied /serviced during the last 3 years ending 31/03/2012 with full postal address and name of the contact person with phone, FAX numbers, and -id, billing amount etc. Certificate regarding satisfactory performance from the minimum three end users should be furnished. 11. Are you the manufacturer / authorized dealer / distributor/ reseller for the product quoted (please attached relevant certificate): Deviations in specifications, if yes, please mention in separate sheet. 13. Whether technical specification are attached with Technical Bid or not. Yes/No 14. Training for Faculty/Staff of the GBU, if required. Tender Bid : Network Theory Lab. Items_SoE Page 3

4 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida DECLARATION I/We hereby declare that the information given in the technical bid by the undersigned is correct. (SIGNATURE OF THE BIDDER) WITH SEAL NAME : ADDRESS :... :... :... Tel./Mobile No. :.. Tender Bid : Network Theory Lab. Items_SoE Page 4

5 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida TECHNICAL SPECIFICATIONS OF ITEMS FOR NETWORK THEORY LAB. S.N. ITEM TECHNICAL SPECIFICATIONS 1. Super Position Theorem with Digital meters with AC and DC supply (List of experiments covered- -To study and verify superposition theorem with DC and AC supply Built in 1.2 to 14V / 350mA AC Power Supply 5/12V DC supply Resistor network for DC supply and RLC network for AC supply.(minimum 3 meshes) Dual Voltage source and one current source. Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, Set of Patch Chords & Experimental Manual. 2. Thevenin s Theorem with Digital meters and AC-DC supply (List of experiments covered- - To study and verify Thevenin theorem with DC and AC supply Built in + 12V / 350mA AC Power Supply 5/12V DC supply Resistor network for DC supply and RLC network for AC supply..(minimum 3 meshes) Variable Voltage source Variable Current source Load Resistor Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, Set of Patch Chords & Experimental Manual. -To study and verify Maximum Power Transfer theorem with DC and AC supply -To study and verify Reciprocity theorem with DC and AC supply 3. Norton s Theorem with Digital meters AC- DC supply (List of experiments covered- - To study and verify Built in + 12V / 350mA AC Power Supply 5/12V DC supply Resistor network for DC supply and RLC network for AC supply..(minimum 3 meshes) Variable Voltage source Variable Current source Load Resistor Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy Tender Bid : Network Theory Lab. Items_SoE Page 5

6 S.N. ITEM TECHNICAL SPECIFICATIONS 4. Norton theorem with DC and AC supply Tellegen s Theorem with Digital meters (List of Experiments -To study and verify Tellegens theorem with DC and AC supply. PCB with 4mm Socket for test points & to measure the Voltage, Set of Patch Chords & Experimental Manual. Built in + 12V / 350mA Fixed AC Voltage Source Resistors Bank to Construct Closed Circuit 5/12V DC supply Resistor network for DC supply and RLC network for AC supply. Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, Set of patch Chords & Experimental Manual. 5. Transient & frequency Response of an RLC Circuit (List of Experiments - To study the transient response of RL,RC and RLC circuit Built in + 12V / 350mA AC Power Supply Variable frequency Square wave L, R & C Circuit Sine Wave Generator Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, Set of Patch Chords & Experimental Manual 6. -To study the frequency response of RL, RC and RLC circuit. Two Port Network Parameters with Digital meters (List of Experiments) -To calculate and verify Z-paramaters - To calculate and verify Y-paramaters - To calculate and verify h-paramaters - To calculate and verify ABCD paramaters - To Determine Equivalent Parameter of series, Parallel and 1.2V to 14V / 350mA Variable DC and AC Voltage Source Resistive π Network Two Port Network with RLC parameters Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage. Set of patch Chords & Experimental Manual. Tender Bid : Network Theory Lab. Items_SoE Page 6

7 S.N. ITEM TECHNICAL SPECIFICATIONS cascade connections - To Determine the image impedance and characteristic impedance of T and Π networks, using O.C. and S.C. tests. 7. LC Filter Kit (Experiments to be conducted - To determine attenuation characteristics of a low pass, high pass and band pass filters and to find their half power frequencies. Programmable DC Power Supply Digital Multi-meters Built in 1-12V / 350mA AC Power Supply Variable frequency Square wave L & C Circuit Resistive load Sine Wave Generator Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, Set of Patch Chords & Experimental Manual DC 0-32 V, 0-2 Amp. Floating output. LCD Display for Voltage and Current. Current limit exceed indication (LED). Step increment for Voltage. User friendly settings of Voltage and Current using keypad and cursor. Constant voltage source and Constant current source. USB interface facility. Provision for programming to set the output voltage linearly with respect to time in different ways like step mode, pulse mode, ramp mode and pulse width mode. Different types of standard waveforms like Square, Ramp, and Pulse can be generated with voltage with respect to time defined by the user. Iron case with powder coating 4 4/5 Digits - 50,000 Count, 3 3/4 Digits-4,000 Count, 4½ digit True RMS, Programmable and non-programmable count Autoranging DMM Auto Ranging 4,000 Count Display DC/AC Volts and Current measurement Resistance and Capacitance measurement Duty Cycle, Frequency and Temperature measurement Temperature mode. Continuity, Transistor and diode test Logic test 9V Battery Power Supply 10. Function Generators 10 MHz Function Generator with AM/FM Generator and 40 MHz Frequency Counter Tender Bid : Network Theory Lab. Items_SoE Page 7

8 S.N. ITEM TECHNICAL SPECIFICATIONS Features: 1 Hz-10 MHz frequency Sine, Square, Triangle, Ramp, Pulse and serial Data Outputs 20 V output and DC Offset 20 4 character LCD Display Controlled by Menu keys 40 MHz Frequency Counter. TTL Output 50 Impedance AM Standard, AM Balance, FM, ASK, FSK, PWM Modulation. 20, 40, 60 db Attenuation. Rise & Fall tim USB Interface Technical Specification: Operating Modes: Sine, Square, Triangle, Ramp, Pulse, TTL and Serial Data Frequency Range: 1Hz, - 10 MHz Sine, 1Hz-2 MHz others Frequency accuracy: + 2% + 7 digits Sine wave Distortion: 1.5% (2MHz) & 2% (10MHz) typical) Square wave Rise & Fall Time: 50ns Pulse Duty Cycle: 15% - 85% var. (min width 200ns) Triangle Nonlinearity: 1% (typical) Output Impedance: 50 Ω Output Voltage: 20 Vpp O.C, 10 Vpp in 50 Ω Attenuation: 20dB, 40dB & 20dB (variable) Level Flatness: 0.5 db (2MHz) & 1.5dB (10MHz) typical DC Offset: + 5V adjustable Internal Sweep: 20ms 4s variable Modulation: AM BAL, AM Std, FM, ASK, FEK, PWM Modulation Freq. Range: DC to 20 KHz Modulation Input: 2 Vpp & 10 Vpp max. Modulation Generator Operating Modes: Sine, Square, Triangle Frequency Range: 10Hz to 100 KHz (Var.) Tender Bid : Network Theory Lab. Items_SoE Page 8

9 S.N. ITEM TECHNICAL SPECIFICATIONS Output: 2 Vpp Frequency Accuracy: + 2% 7 digits Frequency Counter Frequency Range: DC to 40 MHz Resolution: 1 Hz Sensitivity: 0.5 volt Frequency Accuracy: ± 0.5 % Input Impedance: 1MΩ Max. Input Voltage: 200 V (DC+AC Peak) Power supply: 220V ± 10% 50, 60Hz on request PC Interface: USB Interface Display: Microcontroller based 20x4 Line LCD Display Controlled by Menu Key for Frequency, Amplitude, Functions, Parameters and Attenuation etc. Included Accessories: Extensive e manual, BNC-BNC Cable, Mains Card, USB Interface cable. Metallic body with powder coating 11. Dual Trace Analog Oscilloscope 20MHz micro controller based analog Oscilloscope 20 MHz Oscilloscope with 80 character backlit LCD for display of parameters, Auto Time base, 2 channel 4 trace Oscilloscope should have Component and Continuity testing facilities, Metallic body with powder coating Technical Specifications: Operating Modes: Channel 1, Channel 2, Channel 1 & 2 alternate or chopped (approx.350khz), X-Y (Ratio 1:1 Input via CH 2), Add/ Sub CH 1± CH 2, Invert CH 2 Vertical Axis: Bandwidth: DC-20 MHz (-3dB)/ DC-25 MHz (-3dB) Sensitivity: 5mv ~5V/Div, 10 steps Vertical Modes: CH1 single channel, CH2 single channel Dual: CH1 and CH2 are displayed ALT or CHOP selectable at any sweep rate ADD: CH1+CH2 algebraic addition Input coupling: DC-AC-Gnd Maximum Input voltage: 300V (DC + Peak AC). Tender Bid : Network Theory Lab. Items_SoE Page 9

10 S.N. ITEM TECHNICAL SPECIFICATIONS Common mode rejection ratio: 50:1 or better at 50 KHz sine wave Isolation between channels: >1000:1 at 50 MHz >30:1 at 20 MHz Horizontal Axis: Sweep Time: 0.2µsec-0.5 sec/div, 20 steps in sequence Sweep Time accuracy: ±3% Vernier sweep time control: ½.5 of panel- indicated value Sweep magnification: 10 times X10Mag sweep time accuracy: ±5% Linearity: ±3%, x10mag: ±5% Position shift caused by x10mag: within 2div, at CRT screen center. X-Y Mode: Sensitivity :Same as vertical axis Frequency bandwidth :DC to at least 500 KHz X-Y Phase Difference: =3 at DC-50 KHz Caliberation Voltage: Waveform: +ve going square wave Frequency: ~ 1KHz Output Voltage: 2Vp-p±2% Trigger System: Source: CH 1, CH 2, Alt-CH 1/CH 2, Ext. Coupling: AC, Line Trigger Slope: Positive or Negative Modes: Auto / Level EXT trigger Input: Impedance: 1M ohm/approx 25pF Tender Bid : Network Theory Lab. Items_SoE Page 10

11 S.N. ITEM TECHNICAL SPECIFICATIONS Max Input voltage: Approx 300V(DC+AC peak) Horizontal Deflection (X): Bandwidth: DC MHz (-3 db). X-Y mode: Phase Shift < 3 at 60 KHz Deflection Coefficients: Micro-controller based 12 calibrated steps 5mV/Div- 20V/Div (1-2-5 sequence). Electronic Control Display on 80 character backlit Alphanumeric LCD. Input Impedance: 1MΩ 30pF (approx.) Built-in Single Touch Component Tester: Test Voltage: Max 8.6 V rms (Open Circuited) Test Current: Max 8 ma rms (Short Circuited) Test Frequency: 50Hz, Test circuit grounded to chassis. Continuity Tester: Beeper sounds < 75Ω (approx). Cathode Ray Tube: 140 mm. Rectangular tube with internal graticule. Accelerating potential: 2 KV (approx.) Display: 8 x 10 cm. Trace rotation: Adjustable on front panel Calibrator: Square Wave Generator 1 KHz (approx.), 0.2Vpp ± 1% for probe compensation. Stabilized Power Supply: All operating voltages including the EHT Mains Voltage: 230V ± 10%, 50 Hz Tender Bid : Network Theory Lab. Items_SoE Page 11

12 Gautam Buddha University (Established by the Uattar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida GENERAL TERMS AND CONDITIONS 1. Detailed information about the items and their specifications are available in tender document, which can be downloaded from the University website 2. Two bids system of tender will be adopted. (i) (ii) The bid containing technical specifications, EMD, Tender Fee and eligibility documents. Bid containing financial offer. Technical and financial bids should be submitted in separate covers. These two envelops shall be sealed in a common cover and addressed to The Registrar, Gautam Buddha University, Greater Noida, Gautam Budh Nagar (U.P.) superscribing Tender against Notification Advt. GBU/S&P/06/2012, Name of supply: Laboratory Items of Network Theory for School of Engineering so as to reach us on or before last date of bid submission. 3. The Technical Bid and Financial Bid should be duly filled-up. 4. These bids will be opened in two stages. The bid containing technical specifications, EMD, TF and eligibility documents will be opened at first stage and if same is found according to required specifications, the bid containing financial offer shall be opened in second stage. 5. The Technical Bid shall contain all documents in support of quoted item, their specifications, EMD, Tender Fee, terms & conditions and eligibility criteria along with the page number for cited specifications in the company brochure for the particular item. 6. The Financial Bid shall contain price schedule only. The rates and units shall not be overwritten in the price schedule. The price shall be both in words and figures. 7. Eligibility Criteria: All the participating suppliers/firms or principal manufacturershould meet the following qualifying criteria. The firm should be a registered supplier for such supplies. Following documents are required to be submitted with Technical Bid, to qualify eligibility criteria: (a) (b) (c) Sales Tax/VAT registration certificate. PAN and TIN number should be mentioned. The firm/company should have experience of supplying & installation for similar Equipments/Instruments to institutes of National repute. The Tender Bid : Network Theory Lab. Items_SoE Page 12

13 company should also furnish a list of clients of last 3 years. (d) Audited copy of balance sheet with trading, profit & loss account for the last three financial years should be submitted. (e) Name of branch offices & service centres after sales arrangements. (f) Earnest Money Deposit (EMD) is required to be submitted in the form FDR/Bank Guarantee in favour of Gautam Buddha University alongwith the Technical Bid. If supply is not made within the prescribed period EMD would be forfeited. (g) Authorized signatory should sign on all pages. Bids without authorized signature will be rejected. (h) The bidder must be either sole Manufacturer of the Equipments/Instruments or the authorized agent/representative of the OEM. In the case of agent/representative, certified copy of the agency/authorization issued by the OEM should be enclosed with the tender. 8. Offer should be sent in a sealed envelope, submitted either in person or by post on which name and address of the supplier/firm shall be written. Tenders received through E- mails or FAX will not be considered. 9. The technical bids will be opened on scheduled date and time. Bidders/authorized representatives of the bidders intending to attend the tender opening should intimate in advance. 10. The rate quoted should be F.O.R. Gautam Buddha University (Gautam Budh Nagar, Greater Noida, UP) in rupees/foreign currency inclusive of all charges e.g. packing, forwarding local taxes, railway freight, transit insurance etc. The total price should include all accessories required for final installation of the item. Rates of imported goods should be quoted excluding custom duty, as this University is exempted from payment of custom duty (by letter of Department of Scientific and Industrial Research, Ministry of Science & Technology, GOI). 11. The items should have USEPA/International/National validation certificates, wherever applicable. 12. The cost of the tender is Rs.1000/- (Rupees One Thousand) inclusive of taxes (Nonrefundable) and it shall be paid separately in the form of DD/Pay Order drawn in favour of Gautam Buddha University payable at Delhi and should be attached with technical bid envelope. 13. The EMD of the successful bidder will be refunded after getting the Performance Security Deposit (i.e. 10% of PO/WO value). The Performance Security Deposit shall be deposited in the form of FDR/Bank Guaranty, pledged in favour of Gautam Buddha University and will be returned after expiry of the warranty period. The EMD of the unsuccessful bidders will be returned to the firm(s) immediately after finalization of the tenders. No interest will be paid on EMD in any case. 14. The required delivery period must be mentioned against each item. Tenders should preferably be given only for those equipments/items/articles, which are available exstock. 15. Detailed specifications with the mention of make and model/version of each item should be clearly given supported by the illustrated pamphlets wherever possible. Quotations without specified make and Model/Version and other particulars may be rejected. The accessories included in the Equipments/Instruments should also be clearly mentioned. 16. Losses or damage in transit will be borne by the Supplier. The supplier may, if he so desires, get the goods insured and include such charges in the tendered rate. 17. Offered prices should be valid for at least 180 days from the last date of receipt of tenders. 18. All legal proceedings, if necessity arises to the University may be any of the parties (University or Contractor/Supplier) shall have to be lodged in the courts situated at Gautam Buddha Nagar and not elsewhere. Tender Bid : Network Theory Lab. Items_SoE Page 13

14 19. (a) The items delivery time should be preferably within 6 weeks after the date of issuance of the purchase order. If the delivery time is quoted more than that, GBU reserves all rights to permit the bidder to compete. (b) The Penalty Clause is as under:- Should the bidder fail to deliver the goods within stipulated period, the Competent Authority may, at his discretion, allow an extension in time subject to recovery from the bidder as agreed liquidated damages, and not by way of penalty, a sum equal to the percentage of the value of tender amount which the bidder has failed to supply for period of delay as stated below:- i.delay up to one week 1% ii.delay exceeding one week but not 2% exceeding two weeks iii.delay exceeding two weeks but 5% not exceeding one month iv.delay exceeding one month 5% for each month and part there of subject to maximum 10% (c) In case of failure to supply the goods within stipulated delivery period and in accordance with the specifications given in the quotations, the University shall be free to cancel the order. 20. Supply of the placed order in part will not be accepted. 21. The University s term for payment: 90% against delivery of items in good condition, installation and putting those in satisfactory working conditions; balanced 10% payment shall be released after 60 days of satisfactory working of the items. No advance payment shall be released. 22. No revision of price bid will be allowed once the price bids are opened. In case firm/company quoted in foreign currency the price will be converted into Indian Rupee at the conversion rate on the basis of the last day of the bid submission. 23. No increase in price will be allowed after our purchase order(s) are placed. 24. Warranty certificate against all the Itms/Equipments/Instruments developed defects covering warranty period, which commences from the date of installation shall be given at the time of supply of the items. 25. Inspection certificates of the items inspected by the qualified engineer of the manufacturer and packed in accordance with the terms and conditions of this order must be enclosed. 26. During the warranty period whenever the firm is called upon to attend to the rectification of the defects/faults in the consignments, the firm shall attend to the Tender Bid : Network Theory Lab. Items_SoE Page 14

15 repair work within a period of a week. They should render timely back up service whenever called upon. A certificate to the effect should be attached to the tender. 27. A certificate to the effect that items supplied is fully operational and no additional accessory or space is required to fully functioning the Equipments/Instruments should be issued along with the delivery challans/invoice. GBU reserves the right to refuse payment in the event of not furnishing this certificate at the time of supply. 28. Complete user, technical and service manuals/installation drawings/documentation and spare parts catalogue are to be provided along with the supply of the item. 29. Failure to comply with all the terms and conditions mentioned herein would result in the tender being summarily rejected. 30. Vendors are informed that once the firms are shortlisted based on the eligibility criteria and technical specifications, only then the financial bids of the firms meeting eligibility criteria, technical specifications / requirements would be opened. 31. Conditional tenders will not be accepted. 32. Any cutting and overwriting in the financial bid will not be accepted. 33. GBU reserves the right to change the order quantity or split the orders among multiple vendors without assigning any reason (s) whatsoever. 34. GBU reserves the right to reject any or all the tenders without assigning any reasons whatsoever. Registrar Gautam Buddha University Tender Bid : Network Theory Lab. Items_SoE Page 15

16 Gautam Buddha University (Established by the Uattar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida ACCEPTANCE We accept the above terms and conditions and shall comply with them strictly. (SIGNATURE OF THE BIDDER) WITH SEAL NAME : ADDRESS :... :... :... Tel./Mobile No. :.. Tender Bid : Network Theory Lab. Items_SoE Page 16

17 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida FINANCIAL BID FOR NETWORK TRANSFER ITEMS S.N. ITEM Qty Unit Price (Rs.) Tax Amt Gr. Total (Rs.) 1. Super Position Theorem with Digital meters with AC and DC supply 2 2. Thevenin s Theorem with Digital meters and AC-DC supply 3. Norton s Theorem with Digital meters AC- DC supply Tellegen s Theorem with Digital meters 2 5. Transient & frequency Response of an RLC Circuit 2 6. Two Port Network Parameters with Digital meters 7. LC Filter Kit Programmable DC Power Supply Digital Multi-meters Function Generators 11. Dual Trace Analog Oscilloscope 2 2 Warranty Period : Total cost of the offer is Rs. in words (Rupees. I abide by all the terms & conditions of the tender. Tender Bid : Network Theory Lab. Items_SoE Page 17

18 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002 UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature) Greater Noida ACCEPTANCE I/We accept the above terms and conditions and shall comply with them strictly. DECLARATION 1. The rates quoted are inclusive of all taxes and F.O.R University Stores. 2. The information given in the financial bid by the undersigned is correct. (SIGNATURE OF THE BIDDER) WITH SEAL NAME : ADDRESS :... :... :... Tel./Mobile No. :.. Tender Bid : Network Theory Lab. Items_SoE Page 18