Microplastic pollution originating from Textiles and Paints: Environmental impacts and solutions
|
|
- Octavia McKenzie
- 5 years ago
- Views:
Transcription
1 Microplastic pollution originating from Textiles and Paints: Environmental impacts and solutions Marijana Toben BUND-Meeresschutzbüro Bund für Umwelt und Naturschutz Deutschland e.v. (BUND)
2 Types of fibers Natural (wool, cotton, hemp, jute) Man-made (transformed natural poymers/ synthetic polymers) The most important are: Acrylic Polyamide Polyester Polyolefins Elastane UHMwPE
3 Fibers in the environment World consumption: Ktons/year of plastic Release during the laundry process has been reported as source for microplastic. Global release: 34.8% will be released due to laundry One of the most common forms of microplastic in the marine environment. Due to abrasion and shedding of textiles, fibers will be discharged to the effluent and then reach via wastewater the WWTPs. Dominate in abundance among fragments and spheres in the marine environment.
4 Fibers in the environment Synthetic fibers were found in sediments, water column and biota. 63% of the water samples collected from coastal and open waters of the Baltic Sea contained colored fibers in concentrations from 0.07 to 2.6 items per liter.. Coastal waters showed to be more contaminated than open-sea waters. This indicates that synthetic fibers are predominately a land based source. Concentration showed to be positively correlating with population density.
5 WWTPs Synthetic fibers can not be removed completly and can potentially end up in the ocean. Synthetic fibers will be less retained from WWTPs then natural fibers. High variances in fiber concentration between WWTPs depending on efficiency. Polyester fibers were the most abundant. BUND
6 Shedability of textiles Fiber shedding is depending on fiber slippage, coating point rapture or fiber breakage. Extent for fiber shedding depends on different variables (e.g. fabric type, texture, number of fiber types involved) A study tested three different fabrics: polyester, polyester-cotton blend and acrylic: Polyester: 1 st wash (2.79 mg) to 5 th wash (1.63 mg). Acrylic: 1 st wash (2.63 mg) to 4 th (0.99 mg). Polyester cotton blend: 1 st (0.45 mg) to 4 th (0.30 mg). higher fiber release was found when fabric conditioner was used.
7 Solutions 1. Permant washing machine filters Since on-board filters for washing machines are not yet implemented, a temporary solution can be selfinstalling washing machine filter e.g. Filtrol 160. As long term solution should be aimed for on-board filters for washing machines provided by the industry. 2. Industrial prewash The first wash schowed to relase the highest amount of small sized fibers. During the yarn spinning process, short fibers will be embedded in the textile and washed out later. Mandantory prewash from the indutry with high effiency filters could prevent that large amount of fibers will reach the household effluent.
8 Solutions 3. WWTPs How much microplastic will be found depends on the efficiency of the WWTPs. Tertiary filtration step with a pile cloth media filtration. Particles with the size 500 µm were reduced to 100%, particles 500 µm to 92.8% and fibers to 98.2% The implementation could retain synthetic fibers very efficiently. 4. Laundry process and washing maschine model Mechanical and chemical actions during washing weaken fiber structure with a progressive damage. The higher the temperature, the higher is also the destruction of the material. Higher fiber release for the top-load than front-load machines. Clothes should be washed less often and with gentle washing conditions and a front load is recommended.
9 Solutions 5. Guppy friend The bag holds back synthetic fibers from clothing during washing and prevents microfibers from entering into rivers and oceans. Its soft surface results in less fiber loss and thus extends clothing lifetime. It should be used especially for recently bought synthetic clothing. 6. Second-hand clothing, consume reduction and clothing design Change consumption behavior Fewer clothing and if so, of better quality/ give defect clothing to the tailor. Second-hand shops and exchange platforms. Combination of polyester-cotton released 80 % less fibers than acrylic and polyester.
10 Recommendations Industry Green chemistry/green economy initiatives making fibers free of petrochemical or synthetic ingredients. International regulations on WWTPs for an additional filtration step. Prewash of recently produced clothing by the industry with high efficiency filters. Implementation of on-board filters for washing machines Society Wash less often, with lower temperatures and mild washing conditions. Use a front load washing machine. Use the guppy friend especially for synthetic and recently bought clothing. Self-installing washing machine filters. Give defect clothing to the tailor instead of throwing away and buying new ones. Avoid clothing that contain 100% polyester or acrylic fibers; instead buy a combination of polyester-cotton fabric. Reduce consumption.
11 Paints/Coatings Coatings and paints are used in a wide range of applications Surface coating: a material that is applied as a thin continuous layer to a surface. Paint: pigmented materials. Emulsions or dispersion polymers describe a process or end product of polymerizing addition monomers in water in the presence of surfactant. The paint consists of a binder, pigments, filler and other additives - which make the paint when cured like a plastic material. Binders determine the application method, drying and hardening behavior, adhesion to the substrate, mechanical components, chemical resistance and resistance to weathering.
12 Paint particles Paints are dispersions of sub-micrometer polymer particles and their release into the environment can be harmful for marine organisms. The uptake of microplastic of various shapes has been documented for many marine organisms. Release pathways into the environment are abrasion/weathering or the loss of particles during application before the paint is cured. Weathering and abrasion will make the paint brittle over time - the paint surface roughens and paint particles (very thin microlayers) peel off - and will be released into the environment.
13 Road markings World consumption: 588 Ktons/year Global release: 7% Different paints will be applied e.g. Acrylic Polymer and Styrene/Acrylic Polymer. Used for travel lanes, loading zones, and parking spaces etc. The degradation and removal of road markings depends on several different factors. Pathways to the sea are either road runoff or the transportation by wind. For wind, 100 % of the losses will also become releases.
14 World consumption: 452 Ktons/year Global release: 3.7%. 100% of the losses will also become releases. Commercial boats: 3 9% and for leisure boats:10 50%. The proportion of plastic in those paints accounts for 50%. A typical marine paint contains above 50% solids. Marine coatings enter the marine environment straight by the sea pathway or from land by paint spill or removal.
15 Paints for buildings Corrosion/ decomposition/ decorative appearance Weathering leads to a peel off of small paints particles (especially UVirradiation). Paint may be sanded or scratched off by maintenance (re-painting). Flakes generated by sanding are typically of size below 10 µm. Possible pathways to the sea are sewer and air.
16 Types of paints and coatings Synthetic polymers in paints exhibit a range of molecular masses. Increasing molecular mass is accompanied by improved mechanical properties, a decrease in solubility, and an increase in the viscosity of their solutions. Whereof, a higher molecular mass comes also along with a decreasing environmental compatibility. Organic binding agents are polymer emulsions which make the paint stick to the surface. It adheres by the physical process of adhesive bonding. Molecular masses between 500 and High mass e.g. polyacrylate, vinyl chloride copolymers Low mass e.g. alkyd resins, epoxy resins
17 Types Chlorinate rubber coatings Vinyl coatings Thermoplastic Fluoropolymers Polystyrene and Styrene Copolymers Acrylic coatings Epoxy Polyurethane coatings Silicon coatings Alkyd coatings Appliance/Function Underwater coatings Polishing agents, weatherresistant coatings Binder for indoor and outdoor paints, textured finishes Exterior paints, concrete, road-marking Ceilings, walls, building fronts Surface coatings Surface coatings Surface coatings Corrosion protection, decoration
18 Alternatives Most environmental friendly paints put their focus on low-voc, low-odour and non-toxic ingredients but not on substituting synthetic polymers. Biodegradable polymers are not a long-term solution since the degradation is only ensured under laboratory conditions. Factors to induce degradation are temperatures, light, oxygen and microorganisms which are not always present in sufficient amount. Natural paints are made with raw materials such as clay, chalk, marble, and earth and mineral pigments free of petrochemical or synthetic ingredients.
19 Alternatives Inorganic binding agents are on mineral basis e.g. potassium silicate. It reacts chemically with the substrate by the process of silification. Extremely weather-resistant and forms a solid base. Pure silicate paints are used in renovation of historical buildings. High resistent and UV-stable due to the permantely integrated pigments. The paint vibrancy is maintaned for longer, surface does not become chalky and becomes less dirty. Ecofriendly marine coatings does not really exist. Novel antifouling coatings are derived from marine bacteria and biodegrable polymers but this can only be a temporary solution. Ecofriendly road-marking does also not really exist. Change from solventborne to water-borne polymer dispersions.
20 Recommendations Green chemistry/green economy initiatives The application of environmental friendly paints should be mandatory for all sectors. New buildings should be painted with pure silicate paints and no more with polymer dispersions. Waste water treatment systems need to be mandatory for all shipyards. The contaminated water must be treated before being discharged. Washing water effluents from sandblasting or high pressure wash are not allowed to be directed directly to the nearby sea. Non do-it-yourself maintenance of houses and ships at private property or onshore. Here, particle loose will become 100% releases. Proper particle disposal must be ensured.
21 Thank you for your attention! BUND Meeresschutzbüro Nadja Ziebarth, Tel Marijana Toben, Tel marijana.toben@bund.net BUND Landesverband Bremen e.v. Am Dobben Bremen
Thai Kiwa Chemicals Co., Ltd.
Thai Kiwa Chemicals Co., Ltd. Internationally Recognized Zero VOC VOLATILE ORGANIC COMPOUNDS ISO 9001 : 2015 QUALITY MANAGEMENT FROM UKAS Q-LAB INTERNATIONAL STANDARD TESTING For Exterior and Interior
More informationSELECTING EXTERIOR TOPCOATS BASED ON AESTHETIC PERFORMANCE
SELECTING EXTERIOR TOPCOATS BASED ON AESTHETIC PERFORMANCE COATINGS & ULTRAVIOLET LIGHT What is a Coating Polymer? A carbon chain created primarily with by-products of the petroleum industry. These polymers,
More information13 Congresso Internacional de Tintas 13ª Exposição Internacional de Fornecedores para Tintas
HIGH PERFORMANCE ADDITIVES FOR WATER BASED AND LOW VOC PAINTS AND COATINGS Daniel de Moura Massarente, Wolfgang Geuking Croda Coatings and Polymers The replacement of solvent-based coatings by water based
More informationHandbook for zero microplastics from textiles and laundry
Handbook for zero microplastics from textiles and laundry Good practice guidelines for the textile industry 1. Explanation of the topic and purpose of the guidelines Polyester and acrylic are the main
More informationTechnical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner
Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal
More information2K weather resistance clear coat A850
Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance
More informationWATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS
WATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS Björn Borup, Philipp Albert, Helmut Mack Evonik Industries, Germany Introduction Regulatory pressure and increasing
More informationWhat paint can do Part 2
What paint can do Part 2 Paint raw materials How can the properties of the individual paint layers be achieved? To answer this question, let's peek into a paint can and take a closer look at the individual
More informationContents. NIIR Project Consultancy Services (NPCS) 1/6
The Complete Book on Resins (Alkyd, Amino, Phenolic, Polyurethane, Epoxy, Silicone, Acrylic), Paints, Varnishes, Pigments & Additives (Surface Coating Products with Formulae)(3rd Revised Edition) Author:
More informationUNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS
UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:
More informationWater-based Polymer Dispersions. for architectural paints, decorative coatings and plasters
Water-based Polymer Dispersions for architectural paints, decorative coatings and plasters Trim Gloss Paints Indoor Paints Facade Paints Primers Silicate Coatings Varnishes Plasters Concrete Protection
More informationHELIOS RESINS, HIGH-QUALITY RESINS FOR RELIABLE COATING SOLUTIONS.
WOOD AND PLASTIC HELIOS S, HIGH-QUALITY S SUPPLIER SINCE 1908. WOOD AND PLASTIC THESE HIGH-QUALITY S HAVE BEEN DEVELOPED TO ACHIEVE THE FINEST DECORATIVE WOODEN AND WOOD-LIKE SURFACES. S FOR RELIABLE COATING
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationIn addition to point 1. containers face the following corrosive conditions like :
THE DEVELOPMENT OF CONTAINER COATINGS There are now in excess of 4 million TEU in the world they predominate the world trades, and are frequently seen on the oceans, rivers, roads, rails and even airplanes
More informationSituation of Microplastics and Paints
Situation of Microplastics and Paints Microplastics and paints With regard to mixtures such as paints the issue of microplastics would appear in two forms according to the sources where they may emit from.
More informationMold Release, Break-In, Maintenance and Storage. Linda Bergstrom
Mold Release, Break-In, Maintenance and Storage Linda Bergstrom Mold Release Requirements Form a barrier between the mold and molded part Provide a lubricating film which allows the molded part to be easily
More informationSubject: Dyeing and Printing. Unit 7: Introduction to textile printing. Quadrant 1 e-text
Subject: Dyeing and Printing Unit 7: Introduction to textile printing Quadrant 1 e-text Learning Objectives The learning objectives of this unit are: Review the methods of printing textiles. 7.1 INTRODUCTION
More informationINTERIOR PRODUCTS INTERIOR. Goldsil. Hobby EXTRA. EXTRA Plastic NEW FORMULA NEW PRODUCT
INTERIOR PRODUCTS INTERIOR INTERIOR PRODUCTS Goldsil Acrylic copolymer emulsion based, silicone-tempered, wash-off resistant, decorative, silk-matt, topcoat interior paint. By its siliconized formula,
More information380 Swimming Pool Paint
Issued 21 st April 2010 PRODUCT DATA SHEET UNPAINTED CEMENT 380 Swimming Pool Paint SURFACE PREPARATION New cement or render should be allowed to cure for at least 21-28 days before any preparation is
More informationA Waterborne Self Cross Linking Binder for Designing Coatings with Excellent Chemical and Blocking Resistance
A Waterborne Self Cross Linking Binder for Designing Coatings with Excellent Chemical and Blocking Resistance Gun Lundsten CH-Polymers OY, Raisionkaari 55, 21200 Raisio, Finland, e-mail: gun.lundsten@ch-polymers.com
More informationHELIOS RESINS, HIGH-QUALITY RESINS FOR RELIABLE COATING SOLUTIONS. METAL RESINS SUPPLIER SINCE GOLDEN RESINS DEVELOPED BY ADVANCED TECHNOLOGY
METAL HELIOS S, HIGH-QUALITY S SUPPLIER SINCE 1908. METAL These resins ensure excellent protection coatings for a broad range of industrial metal coating applications. S FOR RELIABLE COATING SOLUTIONS.
More information"Material fields per se" such as polymer materials or compositions and kind of fibrous web.
D06N WALL, FLOOR OR LIKE COVERING MATERIALS, e.g. LINOLEUM, OILCLOTH, ARTIFICIAL LEATHER, ROOFING FELT, CONSISTING OF A FIBROUS WEB COATED WITH A LAYER OF MACROMOLECULAR MATERIAL; FLEXIBLE SHEET MATERIAL
More informationSURFACE PREPARATION AND MATERIAL APPLICATION KEIM MINERAL PAINTS
SURFACE PREPARATION AND MATERIAL APPLICATION KEIM MINERAL PAINTS PRE-TREATMENT KEIM Mineral Paints are different to conventional film forming paints. Mineral paints are made with potassium silicate and
More informationSketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days
Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²
More informationScreen Printing on Rowmark Material
Screen Printing on Rowmark Material For screen printing, Rowmark recommends the following inks and settings: Ink: Nazdar 9700 series Thinner: Nazdar RE 180 Ink Mix: 10:1 ink to thinner ratio Mix ink and
More informationWhat is Paint?
What is Paint? 2017 1 PAINT IS A LIQUID DESIGNED FOR APPLICATION TO A SURFACE IN A THIN FILM THAT CURES TO AN SOLID FILM. A COATING WHICH PROTECTS THE SURFACE OF AN OBJECT. USED TO CREATE DESIRED AESTHETICS
More informationLinings / Interlinings Motifs Needles & Thread Rhinestone Accessories Ribbons Rubber Bands Trimmings Zippers & Many more...
VISITOR PROFILE Garment Manufacturers Knitwear Manufacturers Textile Manufacturers Leather Goods Manufacturers Design Studios & Institutes Apparel Brands & Labels Laundry Operators & Dry Cleaners Buying
More informationGekatex SAS - Products. Tack rags Buffing pads Sealant wipes. Soft wipes Solvent wipes Microfiber wipes
Gekatex SAS - Products Tack rags Buffing pads Sealant wipes Soft wipes Solvent wipes Microfiber wipes Wet Line Coloured Wipes Gekatex SAS - Tack rags Tack rags TRPE70 Tack rag in knitted polyester To remove
More informationpigment preparations for a colorful world
pigment preparations for a colorful world EMULSION PAINTS POWDER PIGMENTS MASTER- BATCHES LIQUID COLOURS COLOURANT PASTES SPECIALITIES COLOURS IN EVERY FORMS AND FACET PROFILE Since 1785, we have been
More informationDownloaded from
1. Cheap silk sarees are made of: (A) acrylic. (B) rayon. (C) polyester. (D) polycot. 2. Name two common forms of polyester. SYNTHETIC FIBRES AND PLASTICS 3. PVC (Poly vinyl chloride) and Polythene are:
More informationMARKING SCHEME TEXTILE CHEMICAL PROCESSING (779) STD XII ( ) Time: 2.5 Hrs. MM: Define the following term (Do any 10) (1x10=10)
MARKING SCHEME TEXTILE CHEMICAL PROCESSING (779) STD XII (2018-19) Time: 2.5 Hrs. MM: 50 GENERAL INSTRUTIONS 1. Attempt all questions 2. Illustrate your answers, wherever possible 1. Define the following
More informationCopyright 2000 Society of Manufacturing Engineers. FUNDAMENTAL MANUFACTURING PROCESSES Painting & Powder Coating
FUNDAMENTAL MANUFACTURING PROCESSES Painting & Powder Coating SCENE 1. CG: FBI warning white text centered on black to blue gradient SCENE 2. CG: disclaimer white text centered on black to blue gradient
More informationHouse Wall Paint: two types of paints and a manufacturing process of latex paint
House Wall Paint: two types of paints and a manufacturing process of latex paint (image from www.bidsbypros.com) Table of Contents History and background knowledge of paint manufacturing... 2 Paint components...
More informationPaint Problems. Although you ve probably never thought about it, paint. and How to Prevent Them
Paint Problems and How to Prevent Them Knowing why paint fails is the best way to get a long-lasting, problem-free paint job By Patrick MccoMBe Although you ve probably never thought about it, paint manufacturers
More informationSAVE COMFORT. Fire retardant seamless quality for maximum safety
SAVE COMFORT Fire retardant seamless quality for maximum safety SAVE COMFORT s quality fine yarn spinning permits processing by seamless knitting machines. Seamless knits without distracting seams can
More informationEnhancing Skid Resistance of Two-Component Road Marking Paint using Mineral and Recycled Materials
Enhancing Skid Resistance of Two-Component Road Marking Paint using Mineral and Recycled Materials Ali Siyahi 1, Amir Kavussi 2, Amin Mirza Boroujerdian 3 Received: 30/02/2014 Accepted: 12/03/ 2015 Abstract
More informationFor questions, concerning corrosion protection, contact our Mr. Franke under Telephone No. +49-(0) , or Fax No.+49-(0) ).
SCHORCH Paint System (Author: Hinrichs / Dep. Q1) Contents 1: General 2: Warranty / paint systems to customers specifications 3: Contact person at SCHORCH 4: Attached index 5: Site conditions of SCHORCH
More informationRalston UNI Plus colourant series
Product Data Sheet VOC free universal colourants for water-based and solvent based architectural paints. For in-plant or point of sales (POS) tinting systems. Light fastness of pigment (BlueWool scale
More informationSILICONE RESIN PAINT FOR MASONRY FACADES
TIKKURILA SILICONE RESIN PAINT FOR MASONRY FACADES DESCRIPTION Water-borne silicone emulsion paint. RECOMMENDED USES Residential, commercial, industrial and storage buildings and others. PRODUCT FEATURES
More informationPAINTS PRIMERS PRODUCT CATALOGUE
PAINTS PRIMERS PRODUCT CATALOGUE Check our quality We combine tradition with modernity Lakma is one of the largest Polish manufacturers of construction and household chemical products. The combination
More informationPAINT SYSTEMS USED IN THE CONSTRUCTION MARKET
BACKGROUND Technical TSB 4.1 Bulletin Construction PAINT SYSTEMS USED IN THE CONSTRUCTION MARKET BACKGROUND TBP 2005.10 The rapid expansion of the use of sheet steel in the construction market is partly
More information+91-8048077796 Astra Chemtech Private Limited http://www.astrachemtech.com/ Valued as a reliable manufacturer and exporter, we are engaged in offering the premium quality of Adhesives & Chemicals. Owing
More informationTechnical Information Printcolor Series 711
Technical Information Series 711 1- or 2- component pad printing ink Multi purpose pad printing ink for plastics. Overview Universal pad printing ink for technical and decorative applications on plastics.
More informationReport No. 83 ADHESIVES. February A private report by the PROCESS ECONOMICS PROGRAM PARK, CALIFORNIA STANFORD RESEARCH INSTITUTE I
Report No. 83 ADHESIVES by WING SIEN FONG February 1973 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION........................
More informationOptimal dispersion. Seite/Page: 144
Optimal dispersion Latex/pigment composite particles improve waterborne paints. The quality of paint is to a large degree dependent on the quality of the pigment particles dispersion. Latex particles containing
More informationPaints for sheet-iron roofs. For corrosion protection of metal surfaces outdoors
Paints for sheet-iron roofs For corrosion protection of metal surfaces outdoors 2 On roofs since 1964 Metallic roofing materials have been used for protecting the roofs of wooden houses since the 19th
More informationBroad-based performance. Regulatory compliance. Pure brilliance.
Broad-based performance. Regulatory compliance. Pure brilliance. 10 Reasons to Switch to 1 reformulation to meet VOC standards of the future...3 1 polymer for use throughout multiple production lines...4
More informationKEIM Soldalit SOL-SILICATE FACADE PAINT FOR UNIVERSAL USE
k e i m sold a l i t for universal use 1 KEIM Soldalit SOL-SILICATE FACADE PAINT FOR UNIVERSAL USE k e i m sold a l i t for universal use 3 The best paint for every substrate COLOUR STABLE Keeps the colour
More information23 rd International Enamel Congress Monday May 25 th 2015
23 rd International Enamel Congress Monday May 25 th 2015 New coatings for the functionalization of enamelled surfaces Giovanni Baldi Enamel is an extremely heat and abrasion resistant coating, able to
More informationFORMULATING YOUR VISION WITH OUR EXPERTISE. Celanese Celvolit Dispersions for Turkey, Middle East and Africa
FORMULATING YOUR VISION WITH OUR EXPERTISE Celanese Dispersions for Turkey, Middle East and Africa About Celanese FORMULATING YOUR VISION WITH OUR EXPERTISE The company Celanese Emulsion Polymers business
More informationhigh tech screen printing products for next-gen technology
high tech screen printing products for next-gen technology www.saati.com SAATI Product Groups Mesh SAATI has been weaving mesh for over 85 years and channels its accumulated knowledge and capabilities
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC D COOPERATIVE PATENT CLASSIFICATION TEXTILES; PAPER TEXTILES OR FLEXIBLE MATERIALS NOT OTHERWISE PROVIDED FOR D04 BRAIDING; LACE-MAKING; KNITTING; TRIMMINGS; NON-WOVEN FABRICS MAKING TEXTILE FABRICS,
More informationspecialities -Photocatalysts in Coatings KRONOClean - TiO 2 KRONOClean 7000 TiO 2
KRONOClean - TiO 2 -Photocatalysts in Coatings KRONOClean 7000 TiO 2 photocatalyst for UV radiation and visible light KRONOClean 7050 TiO 2 photocatalyst for UV radiation Both products are eminently suitable
More informationMaking a Surface Coating Kersti Cox, Miami University, Oxford, OH
Making a Surface Coating Kersti Cox, Miami University, Oxford, OH To close the yellow note, click once to select it and then click the box in the upper left corner. To open the note, double click (Mac
More informationPORTER S MINERAL PAINT
Product Specification Product Name: PORTER S MINERAL PAINT PRODUCT DESCRIPTION: ENVIRONMENTAL INFORMATION: Porter s Mineral Paint is a premium silicate paint, providing unparalleled colourfastness and
More information> Appearance Factors > Health and Hygiene > Technical Specification > Sustainability
THE WOOL FACT SHEET WHY ULSTER WOOL? Ulster Carpets has been producing wool rich carpets since 1938. In choosing an Ulster carpet you are reaping all the benefits that a wool rich carpet has to offer as
More informationUnit 6: Introduction to Fiber and Textile Analysis
Unit 6: Introduction to Fiber and Textile Analysis By the end of this chapter, you will be able to: üidentify and describe common weave patterns of textile samples ücompare and contrast various types of
More informationMETAL, TRANSPORT AND ACE
METAL, TRANSPORT AND ACE HELIOS S, HIGH-QUALITY S SUPPLIER SINCE 1908. METAL, TRANSPORT AND ACE THESE S ENSURE EXCELLENT PROTECTION COATINGS FOR A BROAD RANGE OF INDUSTRIAL METAL COATING S. S FOR RELIABLE
More informationTextiles: any product made from fibers. Fibers: the raw materials in which fabric is made. They are long, thin and hair-like.
Textiles: any product made from fibers. Fibers: the raw materials in which fabric is made. They are long, thin and hair-like. Yarn is made of.staple fibers: ( short fibers) Filaments: (long fibers) Twist
More informationTextile Inkjet Ink for Large Format Printers
Factory Visit December 2016 for Large Format Printers Pablo M. Lee and Nicholas Hellmuth 1 Pablo M. Lee (FLAAR Reports ink evaluation manager), Lim Kheng Tee (TRENDVISION President) and Dr. Nicholas Hellmuth
More informationLoose Lay Luxury Vinyl Plank
Loose Lay Luxury Vinyl Plank FLEX COLLECTION Installation & maintenance * PLEASE READ CAREFULLY * Installation, maintenance & warranty guideline for loose lay luxury vinyl products. Adherence to This guideline
More informationTarget Markets. Water-based inks
Styrene Maleic Anhydride Ester Copolymers and the New SMA 1550H Pigment Dispersants for Waterborne Benefits Improved color strength Improved dispersion stability and viscosity control Excellent compatibility
More informationSequoia Marketing Sdn. Bhd. Acrylic Wall Sealer. Woodpecker. 1 of 20
Marketing Sdn. Bhd. Acrylic Wall Sealer Woodpecker 1 of 20 2 of 20 Roadline Fibre Cement Coating 3 of 20 4 of 20 Fibre Cement Coating Auto-paint shine-2-1 5 of 20 Acrylic Undercoat product Product Acrylic
More informationImpredur Silk Matt Enamel 880
Data Sheet Silk Matt Enamel 880 aromatics-free, premium quality, for exterior and interior use Field of Application Properties Material description Standard colors Gloss grade Base material For high-quality
More informationUNIT REF: PO13K UNIT TITLE: KNOWLEDGE OF VEHICLE COLOUR MATCHING
UNIT REF: PO13K UNIT TITLE: KNOWLEDGE OF VEHICLE COLOUR MATCHING Level: 3 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO13 Rationale: This unit enables the learner
More informationThe future of transfer printing. DST - Digital Screenprinting Technologies Øster Søgade Copenhagen K. Denmark
The future of transfer printing DST - Digital Screenprinting Technologies Øster Søgade 10 1357 Copenhagen K. Denmark Contents Who is DST? What does digital offer? Textile transfers Plastic decoration Who
More informationIndividual solutions for colourful protection
We are there for you Individual solutions for colourful protection Individual solutions for colourful protection The private, medium sized company DE REM, as manufacturer of high quality coating systems
More informationGuide to. an Optimum Recyclability. of Printed Graphic Paper
Guide to an Optimum Recyclability of Printed Graphic Paper Guide to an optimum recyclability of printed graphic paper 1. Introduction This paper deals with the recycling of recovered graphic paper, for
More informationtel: fax:
TOP-SERVIS FHU S.C. ul. Czereśniowa 60 21-007 Mełgiew-Krępiec biuro@top-servis.eu tel: +48 81 721 67 89 fax: +48 81 723 41 02 SALES DEPARTMENT: +48 530 740 260 +48 535 434 441 +48 509 970 974 UNIVERSAL
More informationBig Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)
Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT
More informationINDUSTRIAL PAINTS INDUSTRIAL TOP COAT 6 GENERAL 6 ACRYLIC LACQUERS 8 ALKYD LACQUERS 10
COLORS www.soppec.com EVENT COLORS PRO TECH INDUSTRIAL PAINTS In all industrial or agricultural activities it is important to be able to carry out rapid repairs to damaged paintwork, (notably to machinery
More informationGreen Label Product Paints (TGL-4-R4-14)
Green Label Product Paints (TGL-4-R4-14) Revision Approved on 24 July 2014 Thailand Environment Institute (TEI) 16/151 Muang Thong Thani, Bond Street, Bangpood, Pakkred, Nonthaburi 11120 Thailand Phone:
More informationUV-CURING INKS FOR GRAPHIC SCREEN PRINTING Meanwhile UV-curing screen printing ink systems have substituted a large share of conventional
PROGRAM UV-CURING INKS FOR GRAPHIC SCREEN PRINTING Meanwhile UV-curing screen printing ink systems have substituted a large share of conventional 13 screen ink systems. This trend will continue in the
More informationAdhesives. Page 1 of 5
Adhesives Adhesives are not a recent development but have been in use throughout history. From the Romans that caulked their ships with beeswax and wood tar to the Egyptians that used gum from the acacia
More informationAdvanced Coating Materials. Dr. Leif Wirtanen
Advanced Coating Materials Dr. Leif Wirtanen 19.2.2016 Topics 1. Tikkurila 2. Paints and coatings general overview 3. Photocatalysis 4. Energy saving Tikkurila Tikkurila - Durable protection and sustainable
More informationAutomotive Refinish Terminology
Automotive Refinish Terminology Accelerator: A substance that when added to a paint will speed up the rate of cure. Acetone: A very fast evaporating solvent with high solvency for certain types of compounds
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12944-5 Second edition 2007-09-15 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems Peintures et vernis
More informationFOCUS TECHNOLOGY THE BEAUTY OF A LACQUERED SURFACE
FOCUS TECHNOLOGY FOCUS TECHNOLOGY THE BEAUTY OF A LACQUERED SURFACE Snaidero is one of the few companies on the market with more than 50 years experience in the development of lacquered kitchens. Its product
More informationForensics Lab Identification of Fibers
Forensics Lab Identification of Fibers Name Per Due Date Background Information Fibers, strands of thread that make up yarn and cloth, are all around us. You encounter a wide variety of fibers every day.
More informationSynthetic Fibres and Plastics
3 Synthetic Fibres and Plastics MULTIPLE CHOICE QUESTIONS 1. Pick the synthetic fibre out of the following? (a) Cotton (c) Jute (b) Nylon (d) Wool 2. Which of the following is a source of rayon? (a) Wool
More informationArmourcote epoxy primer Armourcote brushing epoxy primer Armourcote high solids epoxy Armourcote epoxy enamel Armourcote 515
Resene product range Data Sheet # Includes Resene premium paints, sealers, primers, undercoats, Engineered Coating Systems and Decorator products for film integrity (no peeling/flaking). Excludes colour
More informationHIROSE PAPER MANUFACTURING CO.,LTD. Hirose Paper s Technology
HIROSE PAPER MANUFACTURING CO.,LTD. Hirose Paper is an innovative Japanese nonwoven company which has over years of history of making wetlaid nonwovens using synthetic fibers. Our goal is to create high
More informationAPPLICATION MANUAL. Setting stones in epoxy clay
APPLICATION MANUAL Setting stones in epoxy clay 2 PRECIOSA CRYSTAL COMPONENTS APPLICATION MANUAL Working instructions for two-component glue for fixing glass stones in costume jewellery products OVERVIEW
More informationCold curing adhesive K-X280
Instructions for use English Cold curing adhesive K-X280 A4048-1.0 en English 1 Safety instructions... 3 2 General information... 3 2.1 Scope of delivery for K-X280... 3 2.2 Accessories required for installation...
More informationThe Process. Features & Benefits PAINT REMOVAL SYSTEM APPLY COVER REMOVE WAIT WASH
PAINT REMOVAL SYSTEM A REVOLUTIONARY, UNIQUE AND ENVIRONMENTALLY FRIENDLY PAINT REMOVAL/ STRIPPING SYSTEM Peel Away 1 Ideal for use on bricks, concrete, cast iron and pressed metal. Removes Oil, Enamel,
More informationPage 1 of 4 Date Jan-12 MATERIAL SAFETY DATA SHEET Print Date Jan-12
Page 1 of 4 Date Jan-12 MATERIAL SAFETY DATA SHEET Print Date Jan-12 1. IDENTIFICATION OF THE PRODUCT AND COMPANY Product Name: IMBIBER BEADS Absorbent Products -Blended with Polyolefin Wick and / or Sand
More informationTextiles: Secret Life of Fabrics
Instructed by Jade Carlin Textiles: Secret Life of Fabrics Week Five: Non-Wovens, Composites, Dyeing & Finishing, Testing Non-wovens Fibers are joined by mechanical or chemical means No distinct pattern
More informationWorléeDisperse. polymeric additives for premium pigment grinding. Daniel Heighton/shutterstock.com
WorléeDisperse polymeric additives for premium pigment grinding Daniel Heighton/shutterstock.com New members in the Worlée additives family Worlée-Chemie has launched a new range of additives. Under the
More informationPRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
More informationSEWING AND HAND APPLICATION CRYSTAL THREADS
SEWING AND HAND APPLICATION CRYSTAL THREADS APPLICATION MANUAL PRECIOSA CRYSTAL COMPONENTS and hand application Preciosa Crystal Components offer a wide range of various products ideal for sewing and
More informationBENASEDO S.p.A. Via Anguissola S., 2 - I MILANO
BENASEDO S.p.A. Via Anguissola S., 2 I20146 MILANO SALES OFFICE AND FACTORY: Via Asiago, 332 I21042 CARONNO PERTUSELLA (VA) Email: info@benasedo.it Phone: +39 0296399.211 (a.r.) Fax: +39 02965.6728 Phone
More informationAdvantages of Powder Coating vs. Wet Paint
Advantages of Powder Coating vs. Wet Paint F irst pioneered in the 1950s, powder coating has evolved as a popular dry finishing process used for functional (protective) and decorative finishes in manufacturing.
More informationData Sheet 5741 Englisch
Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl
More informationWOOD REPAIR. Easy Safe Quick Perfect!
WOOD REPAIR Easy Safe Quick Perfect! The importance of wood repair Wood is a product of nature. This means that there are natural signs of the environment and weather. You can even say that there are artistic
More informationSurface treatment of fibres or filaments from glass, minerals or slags C03C 25/00 The mechanical aspects and apparatuses for the dyeing of textiles
CPC - D06P - 2018.01 D06P DYEING OR PRINTING TEXTILES; DYEING LEATHER, FURS, OR SOLID MACROMOLECULAR SUBSTANCES IN ANY FORM (for mechanical matters D06B, D06C; surface treatment of fibres or filaments
More informationToolkit for Establishing Laws to Control the Use of Lead in Paint Module A
Toolkit for Establishing Laws to Control the Use of Lead in Paint Module A The Problem With Lead Paint 1 Outline Background Paint basics What components of paint can contain lead? Why lead paint is a problem?
More informationUse suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator.
Description A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The
More informationReview. Directions: After watching Design: All About Textiles, answer the following questions.
#300006 Name: Hour: VIDEO WORKSHEET Review Directions: After watching Design: All About Textiles, answer the following questions. NATURAL FIBERS 1. All textiles start as fibers, either or. 2. Natural fibers
More informationGray Urethane Surfacer (Low VOC)
Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet
More informationChapter 11 Dyeing and Printing
Chapter 11 Dyeing and Printing Consumers look for two things: Aesthetically pleasing colors and prints Colorfastness - colors that are permanent Bleed lose colors in water Crock transfers color thru rubbing
More information