TQM BC1/B2 BAW Duplexer
|
|
- Silvester Thornton
- 5 years ago
- Views:
Transcription
1 QM2 Not for New Design as an alternative. Applications CDMA / UMTS Handsets Data Cards Mobile Routers PCS Band Class 1 and Band 2 8 Pin 2.6 x 2.1 x 0.0 mm Product Features Functional Block Diagram Excellent Triple Beat Performance: 88 c Highly Selective BAW Duplexer Achieving Low Insertion Loss Over Full Bandwidth & Operating Conditions. Rx Isolation Of + imum & GPS Rejection Of > Eliminating The Need For A Transmit Filter Single-Ended (SE) Ω Receive & Transmit Ports Performance to +85 C RoHS Compliant, Pb-Free Module Package General Description GND GND Antenna GND GND Receive GND Transmit Top View Pin Configuration The is a high-performance Bulk Acoustic Wave (BAW) duplexer designed to meet the strict CDMA / UMTS requirements for use in the PCS band, known as Band Class 1 (BC1), and B2. is specifically designed to meet the high performance expectations of insertion loss, isolation and triple beat for CDMA systems over the bandwidth of BC1 / B2 applications under all operating conditions. Due to the exceptional receive isolation & GPS rejection performance, no transmit SAW filter is required. This duplexer exhibits excellent power handling capabilities Pin # Label , 4, 5, 7, Receive Transmit Antenna N/C (internal to GND) GND* *See application section for details on optimal grounding. The uses common module packaging techniques to achieve the industry standard 2.6 x 2.1 x 0. mm footprint of 11 -
2 QM2 as an alternative. Not for New Design Absolute Maximum Ratings Recommended Operating Conditions Parameter Parameter Typ Max Units TCASE Rating to +85 C Storage Temperature Input Power, operating (CW, 00 hr Ta=+ C) +85 C The duplexer will function over the recommended range without degradation in reliability or permanent change in performance. +2 m Operation of this device outside the parameter ranges given above may cause permanent damage. Electrical Specifications(1,2) :TX Antenna C Max Parameter Conditions Insertion Loss Return Loss Attenuation Amplitude Variation MHz +25 C Typ (3) +85 C Max Max Units (UMTS)(4) MHz (NCDMA)(5) MHz (Antenna Port) MHz (Tx Port) MHz MHz MHz MHz (GPS) MHz (Glonass) MHz (Glonass) MHz (BC1/B2 Rx) MHz (AWS Rx) MHz (ISM) MHz (2 fo ) 26 MHz (Wi-Fi ) MHz (3 fo ) MHz (4 fo ) MHz (UMTS) (6) of p-p
3 Not For New Designs. Consider QM2 as an alternative. Not for New Designs Electrical Specifications(1,2) : RX Antenna C Parameter Insertion Loss Max Conditions Attenuation Typ (3) +85 C Max Max Units MHz (UMTS) (4) MHz (NCDMA) (5) 1 10 MHz (GSM Rx) Return Loss +25 C 1 10 MHz (Antenna Port) MHz (Rx Port) MHz (BC0 Tx) MHz (BC1/B2 Tx) MHz (ISM band) MHz Linearity - Triple Ratio of CW jammer to triple beat Beat Test[6] product at Rx port 88 (7) 7 c Electrical Specifications(1,2) :TX RX C Parameter Max Conditions MHz +25 C Typ (3) Max +85 C (UMTS) (4) MHz (NCDMA) (5) 63 (UMTS) (4) 54 (NCDMA) (5) MHz Isolation MHz MHz (GPS) MHz (2 fo ) MHz (3 fo ) 5 Max Units Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 3. Typical values are averages over specified band, unless otherwise noted. 4. Integrated over any 3.84 MHz channel within band. 5. Integrated over any 1.25 MHz channel within band 6. Integrated over any 5 MHz channel within band 7. Worst case over specified frequencies. 8. Test conditions defined as follow: Tx port: two CW tones at ftx and ftx+1mhz and m each measured at the DUT antenna port; Antenna port: CW jammer at frx=ftx+80 MHz and - m. Triple Beat Ratio is defined as the ratio of CW jammer to triple-beat product at Rx port for ftx=1851 MHz, 1882 MHz and 113 MHz. - 3 of 11 -
4 QM2 Designsas an alternative. Not for New Reference Design Ω SE Input, Ω SE Output PC Board PCB routing detail Notes: Top, middle & bottom layers: 1 oz. copper Substrates: FR4 dielectric,.031 thick Finish plating: Nickel: 3-8 µm thick, Gold:.03-.2µm thick Hole plating: Copper min.0008 µm thick Notes: Light grey indicates metalized area Dark grey indicates pad areas This footprint represents a recommendation only For solder pad recommendation see mechanical information Schematic Note: 1. Pin 8 can be connected to ground or left floating - 4 of 11 -
5 Not For New Designs. QM2 as an alternative. NotConsider for New Designs Typical RX Performance Test conditions unless otherwise noted: Temp.=+25 C - 5 of 11 -
6 Not For New Designs. Not Consider QM2 for New Designs as an alternative. Typical TX Performance Test conditions unless otherwise noted: Temp.=+25 C - 6 of 11 -
7 Not forqm2 New Designs as an alternative. Isolation And Antenna Return Loss (At Room Temperature) Test conditions unless otherwise noted: Temp.=+25 C - 7 of 11 -
8 QM2 Not for New Designsas an alternative. Package Marking and Dimensions Package Marking 2X.10 C 2.6±0.1 Product Identifier Assembly Code A 4X 0. B (8X) 0.4x X 0.4y C A B 4X 0.1±0.10 TERMINAL #1 IDENTIFIER 2X 6002 XXXX 4X ±0.1 4X 0.0 (1X) shape.10 C 0.10 C A B 0.00 Top View TERMINAL #1 IDENTIFIER Bottom View.10 C 0.88±0.08 Side View C PCB Mounting Pattern Recommended Land Pattern Metallization Recommended Land Pattern, Solder Mask Opening Oversize Pads: um (2mil) per side Center Ground: 100% of module Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Vias are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a 0.mm (#80/.01") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10 ). 3. Ensure good package backside paddle solder attach for reliable operation and best electrical performance. - 8 of 11 -
9 QM2 as an alternative. Not for New Designs Tape and Reel Information Carrier and Cover Tape Dimensions Tape and reel specifications for this part are also available on the TriQuint website. P1 Ø /-0.0 P2 Ø1.00 MIN ±0.05 A 1.75±0.10 R 0. MAX. F C W Bo Ao Ko A 0.12 COVER TAPE SECTION A-A 0.12 Feature Symbol Size (in) Size (mm) Length A (0.02 alt.) 2. (2.34 alt.) Width B (0.112 alt.) 2.0 (5 alt.) Depth K Pitch P Centerline Distance Cavity to Perforation - Length Direction P Cavity to Perforation - Width Direction F Cover Tape Width C Carrier Tape Width W Cavity Measure R of 11 -
10 Not for New Designsas an alternative. QM2 Tape and Reel Information Reel Dimensions 7 inch Reel for 8 mm Tape Packaging reels are used to prevent damage to devices during shipping and storage, loaded carrier tape is typically wound onto a plastic take-up reel. The reels are made from high-impact injection-molded polystyrene (HIPS), which offers mechanical and ESD protection to packaged devices. Feature Symbol Size (in) Size (mm) Reel Diameter A Reel Thickness W Flange Spacing W Hub Outer Dia. N Arbor Hole Dia. C Key Slit Width B Key Slit Dia. D Tape and Reel Information Tape Length and Label Placement Note 2 Notes: 1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA A. 2. Labels are placed on the flange opposite the sprockets in the carrier tape of 11 -
11 Not For New Designs.Not Consider for NewQM2 Designs as an alternative. Product Compliance Information ESD Sensitivity Ratings Solderability Compatible with both lead-free (260 C max. reflow temperature) and tin/lead (2 C max. reflow temperature) soldering processes. Caution! ESD-Sensitive Device Contact plating: ENIG (Electroless Nickel Immersion Gold) ESD Rating: Value: Test: Standard: 1B 0 V Human Body Model (HBM) JEDEC Standard JS ESD Rating: Value: Test: Standard: B > 0 V to < 0 V Machine Model (MM) JEDEC Standard JESD22-A1 RoHs Compliance This part is compliant with EU 02/5/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). MSL Rating MSL Rating: Level 3 Test: 260 C convection reflow Standard: JEDEC Standard IPC/JEDEC J-STD-0 This product also has the following attributes: Lead Free Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (CH12Br2) Free PFOS Free SVHC Free Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: info-sales@triquint.com Tel: Fax: For technical questions and application information: fl.product.engineering@triquint.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death of 11 -
TQM EVB. Not for New Designs BC14/BC1/B25 BAW Duplexer. Applications. Functional Block Diagram. Product Features. General Description
TQM96314 Applications CDMA/LTE handset, data card & mobile router applications using the extension PCS band (Band Class 14) / BC1 / B25 8 Pin 2.6 x 2.1 x.88 mm Product Features Excellent Triple Beat Performance:
More informationTQM EVB B7 BAW Duplexer
Applications LTE handsets, data cards & mobile routers Band 7 2500-2570 MHz Uplink 2620-2690 MHz Downlink 8 Pin 1.6 x 2.0 mm Package Product Features Highly Selective LowDrift BAW Duplexer Low Insertion
More informationTQQ MHz LTE Band 7 Uplink BAW Filter
Applications LTE Band 7 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features Functional Block Diagram 70 MHz Bandwidth High Attenuation Low Loss
More informationTQQ MHz LTE Band 3 Uplink BAW Filter
Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss
More informationTQQ1013 Band 13 SAW Duplexer
Applications LTE Handsets, Data Cards & Mobile Routers Band 13 777 787 MHz Uplink 746 756 MHz Downlink 8 Pin 2.5 x 2.0 mm Package Product Features NoDrift SAW Technology With Near Zero TCF Low Insertion
More informationTQQ MHz LTE Band 7 Uplink BAW Filter
Applications LTE Band 7 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features 70 MHz Bandwidth High Attenuation Low Loss 50 Ohm Input/Output Impedance
More informationQPQ1237TR7. LTE B3/B7 BAW Diplexer (75MHz/70MHz) Product Overview. Key Features. Functional Block Diagram. Applications.
LTE B3/B7 BAW Diplexer (75MHz/7MHz) Product Overview The is a high performance Bulk Acoustic Wave (BAW) Duplexer designed for Band 3 uplink and Band 7 uplink applications. The provides low insertion loss
More informationTQQ7399 DC 2700 MHz Through Line
Applications General Purpose Wireless RF Bypass Paths Microwave Radio Test & Measurement Scientific Instruments Product Features 6 Pin 3 x 3 mm leadless SMT Package Functional Block Diagram DC 2700 MHz
More informationGHz BAW Filter
Applications WiFi/ ISM notch filter to enable coexistence between WiMAX/LTE/TD-LTE & WiFi/BT/ISM radios Applicable passbands: 2.6 GHz WiMAX/LTE, 2.3 GHz WiMAX/LTE, LTE Bands 7 & 38, TD-LTE Band 40, WCS,
More informationQPD W, 48 V GHz GaN RF Power Transistor. Product Description. Product Features. Functional Block Diagram.
Product Description The is a discrete GaN on SiC HEMT which operates from 3.4 3.8 GHz. The device is a single stage matched power amplifier transistor. The can be used in Doherty architecture for the final
More informationTQP DC 6 GHz Gain Block
Product Description The is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 1.9 GHz, the amplifier typically provides 19 db gain, +31.7 dbm OIP3,
More informationECG055B-G InGaP HBT Gain Block
Applications Wireless Infrastructure CATV / SATV / MoCA Point to Point Defense & Aerospace Test & Measurement Equipment General Purpose Wireless Product Features SOT-89 Package Style Functional Block Diagram
More informationMHz SAW Filter
Applications General Purpose For IF applications Product Features Typical 1 db Bandwidth of 1.2 MHz Low loss High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions:
More informationMHz SAW Filter
Applications General Purpose For IF applications Product Features Typical 3 db bandwidth of 18.5 MHz Low loss High Attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions:
More informationQPA9120SR. High Gain High Linearity Driver Amplifier. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information
Product Overview The is a wideband, high gain, and high linearity driver amplifier in a low-cost, RoHS compliant 3x3 mm QFN package. With Qorvo s E-pHEMT process, this amplifier delivers exceptional performance
More informationTGL2201-SM T/R. Wideband Dual Stage VPIN Limiter. Applications. Ordering Information. Part No. ECCN Description
Applications LNA Receiver Chain Protection Military Radar Product Features 2-12 GHz Passive, High Isolation Limiter Low Loss < 1.0 db, X-band Return Loss > 10 db Flat Leakage < 18 dbm Input Power CW Survivability
More informationMHz SAW Filter
Applications Wireless Infrastructure AMPS, CDMA and TDMA General Purpose RF Filter 4G, MultiStandard UMTS Bands 1 and 10 Downlink Repeaters Product Features SMP12, 3.00 x 3.00 x 1.22 mm Functional Block
More informationGHz WLAN/BT LTE Co-Existence Filter
Applications WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TD-LTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters High-power WLAN Access Points Applicable reject
More informationTGP2107-SM 6 to 18 GHz 6-Bit Digital Phase Shifter ( V C )
TGP217-SM Applications Phased Array Antenna Systems Satellite Communication Systems Electronic Warfare QFN 5x5 mm 32L Product Features Functional Block Diagram Frequency Range: 6 to 18 GHz 6-Bit Digital
More informationTGV2561-SM GHz VCO with Divide by 2
GND RFout / 2 Vtune TGV2561-SM Applications Point to Point Radio / VSAT Millimeter-wave Communications Test Equipment 32-pin 5x5mm package Product Features Functional Block Diagram Frequency range: 8.9
More informationMHz SAW Filter
Applications Wireless Infrastructure AMPS, CDMA and TDMA General Purpose RF Filter 4G, MultiStandard Band 1 Uplink Repeaters Product Features SMP12, 3.00 x 3.00 x 1.22 mm Functional Block Diagram 60 MHz
More informationQPQ1907SR. 2.4GHz Wi-Fi/BT/LTE Co-Existence BAW Filter. Product Description. Functional Block Diagram. Feature Overview.
2.4GHz Wi-Fi/BT/LTE Co-Existence BAW Filter Product Description The QPQ1907 is a high-performance, high power Bulk Acoustic Wave (BAW) band-pass filter with extremely steep skirts, simultaneously exhibiting
More informationTGA2760-SM-T/R GHz Power Amplifier. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information
Product Overview Qorvo s is a packaged X-band high power amplifier utilizing Qorvo s production GaAs phemt and GaN processes. The operates from 11.7GHz and typically provides 16W saturated power with power-added
More informationTQP3M9008 High Linearity LNA Gain Block
General Description The is a cascadable, high linearity gain block amplifier in a low-cost surface-mount package. At 1.9 GHz, the amplifier typically provides 2.6 db gain, +36 dbm OIP3, and 1.3 db Noise
More informationTQP GHz 8W High Linearity Power Amplifier
TQP331 Applications Small Cells / Repeaters / DAS Wireless Infrastructure Wireless Backhaul Portable Radios LTE / WCDMA / CDMA TBD 12 Pin 4x5 mm DFN Package Product Features Functional Block Diagram 4-27
More information/881.5 MHz SAW Duplexer
Applications General purpose wireless Femtocells Repeaters Data cards and dongles Product Features Usable bandwidth 25 MHz No matching required for operation at Ω Excellent rejection for Bluetooth and
More informationTGP2105-SM 6-18 GHz 6-Bit Digital Phase Shifter (+Vc)
Applications Phased Array Antenna Systems Satellite Communication Systems Electronic Warfare QFN 5x5 mm 32L Product Features Functional Block Diagram Frequency Range: 6 to 18 GHz 6-Bit Digital Phase Shifter
More informationMHz SAW Filter
Applications Base Station Infrastructure LTE Macrocells General Purpose Wireless Product Features SMP28B 7.1 x 5.51 x 1.63 mm Functional Block Diagram Usable bandwidth of 6 MHz Balanced operation High
More informationTQP3M9018 High Linearity LNA Gain Block
Applications Repeaters Mobile Infrastructure LTE / WCDMA / CDMA / EDGE General Purpose Wireless 6 Pin x mm QFN Package Product Features Functional Block Diagram -4 MHz.5 db Gain at 9 MHz. db Noise Figure
More informationML485-G. Applications. Functional Block Diagram. Product Features. General Description. Pin Configuration. Ordering Information
RFMD + TriQuint = Qorvo ML 1.-3.2 GHz High IP3 Mixer with Integrated LO Amp Applications PCS / 3G Base station / Repeaters WCDMA / LTE WiMax / WiBro ISM / Fixed Wireless HPA Feedback Paths Product Features
More informationTQP DC-6 GHz Gain Block
Applications Wireless Infrastructure CATV / SATV / MoCA Point to Point Defense & Aerospace Test & Measurement Equipment General Purpose Wireless SOT-89 Package Product Features Functional Block Diagram
More informationMHz SAW Filter
Applications Smart metering Remote meter reading wireless modules Licensed band wireless General purpose wireless Product Features Usable bandwidth 15 MHz Low loss Dimensions: 3.80 x 3.80 x 1.27 mm Singleended
More informationTAT Ω 5V MHz RF Amplifier
TAT74 Datasheet: Rev D 04-17-17-1 of 8 - Disclaimer: Subject to change without notice TAT74 Absolute Maximum Ratings Parameter Rating Storage Temperature - to 1 C Device Voltage (VDD) +10 V Operation of
More informationTAT Ω phemt Adjustable Gain RF Amplifier
Applications Single-ended and Push-pull Optical Receivers Low-noise Drop Amplifiers Distribution Amplifiers Multi-Dwelling Units Single-ended Gain Block Product Features Gain, return loss and bias externally
More informationTGA3500-SM 2-12 GHz Driver Amplifier
Applications General Purpose QFN 8x8mm 28L Product Features Frequency Range: 2 12 GHz Power: 23 dbm P SAT Gain: 34 db Output TOI: 29 dbm Noise Figure: 3 db Bias: V D = 5 V, I D = 0 ma, V G1 = -0.7 V, V
More informationTQP3M9028 High Linearity LNA Gain Block
General Description The is a cascadable, high linearity gain block amplifier in a low-cost surface-mount package. At 1.9 GHz, the amplifier typically provides 14.7 db gain, + dbm OIP3, and 1.8 db Noise
More informationTQP PCB. DC-6 GHz Gain Block. Applications. Ordering Information
Applications Mobile Infrastructure LTE / WCDMA / CDMA CATV Point to Point General Purpose Wireless Product Features Cascadable Gain Block DC 6000 MHz 19.1 db Gain @ 1.9 GHz 4.7 db Noise Figure @ 1.9 GHz
More informationTQP7M W High Linearity Amplifier. Applications. Ordering Information
Applications Repeaters BTS Transceivers BTS High Power Amplifiers CDMA / WCDMA / LTE General Purpose Wireless 3-pin SOT-89 Package Product Features 5-15 MHz +3 dbm P1dB at 94MHz +49 dbm Output IP3 at 94MHz
More informationQPA4501SR. 3 W, 28 V, GHz GaN PA Module. Product Overview. Key Features. Functional Block Diagram Applications. Ordering Information
Product Overview The is an integrated 2-stage Power Amplifier Module designed for massive MIMO applications up to 3 W RMS at the device output covering frequency range from 4.4 to 5.0 GHz. The module is
More informationTQP DC-6 GHz Gain Block
Applications Mobile Infrastructure LTE / WCDMA / CDMA / EDGE CATV Point to Point General Purpose Wireless SOT-89 Package Product Features Functional Block Diagram DC-6000 MHz 15.4 db Gain @ 1.9 GHz 4 3.6
More informationA 2.4 GHz WLAN/BTLTE Co-Existence Filter
Applications Automotive Telematics and Infotainment 2.4 GHz ISM Applications & Smart Energy WiFi bandpass filter that enables the coexistence of 3G/4G/LTE/TD-LTE & WiFi signals WLAN systems (Higher power
More informationTGA2583-SM 2.7 to 3.7GHz, 10W GaN Power Amplifier
Applications Commercial and Military Radar QFN 5x5 mm 32L Product Features Functional Block Diagram Frequency Range: 2.7-3.7 GHz P SAT :.5 dbm PAE: > 50 % Small Signal Gain: 33 db Return Loss: > 12 db
More informationApplications Ordering Information Part No. ECCN Description TGA2535-SM 3A001.b.2.b X-band Power Amplifier
Applications Point-to-Point Radio X-Band Communications QFN 5x5mm 24L Product Features Functional Block Diagram Frequency Range: 10 12 GHz TOI: 43 dbm Power: 34.5 dbm Psat, 33 dbm P1dB Gain: 24 db Return
More informationQPA9801SR MHz 1/4W Balanced Amplifier. General Description. Product Features. Functional Block Diagram Applications. Ordering Information
General Description The is a balanced amplifier module with embedded hybrid couplers to convert to single ended input and output ports. The module has an enable pin to allow for shutting down of the amplifier.
More informationTQP3M9008 High Linearity LNA Gain Block
Applications Repeaters Mobile Infrastructure LTE / WCDMA / EDGE / CDMA General Purpose Wireless 3-pin SOT-89 Package Product Features Functional Block Diagram 5-4 MHz 2 db Gain @ 1.9 GHz +35.5 dbm Output
More informationTQL9065 Ultra Low Noise 2-Stage Bypass LNA
Applications Base Station Receivers Tower Mount Amplifiers Repeaters FDD-LTE, TDD-LTE, WCDMA General Purpose Wireless Product Features 16-pin 3.5 x 3.5 mm Package Functional Block Diagram 1.5 3.8 GHz Operational
More informationQPD W, 48 V GHz GaN RF Power Transistor
Applications W-CDMA / LTE Macrocell Base Station, Band 1 and Band 3 Active Antenna General Purpose Applications 2 Lead NI400 Package Product Features Functional Block Diagram Operating Frequency Range:
More informationTGS SM GHz High Power SPDT Reflective Switch
- 18 GHz High Power SPDT Reflective Switch Product Overview Qorvo s is a single-pole, double-throw (SPDT) reflective switch packaged in a 4x4mm ceramic, air-cavity QFN. Fabricated on Qorvo s QGaN25 0.25um
More informationWJA V Active-Bias InGaP HBT Gain Block
Applications IF Amplifier VHF/UHF Transmission Wireless Infrastructure CATV / SATV / MoCA General Purpose Wireless SOT-89 Package Product Features Functional Block Diagram 50 Ohm Cascadable Gain Block
More informationAH323-G. 2W High Linearity 5V 2-Stage Amplifier. Applications. Product Features. Functional Block Diagram. General Description.
Applications Base stations / Repeaters High Power Amplifiers 2G / 3G / 4G Wireless Infrastructure Femtocells LTE / WCDMA / CDMA 20 Pin 5x5 mm QFN Package Product Features Functional Block Diagram 700-2700
More informationTGA4533-SM K-Band Power Amplifier
Applications Point-to-Point Radio K-Band Sat-Com QFN 4x4 mm L Product Features Functional Block Diagram Frequency Range: 21.2 23.6 GHz Power: dbm Psat, 31 dbm P1dB Gain: 22 db TOI: 41 dbm at 21 dbm SCL
More informationQPL9096 Ultra Low-Noise, Bypass LNA
General Description The is a high-linearity, ultra-low noise gain block amplifier with a bypass mode functionality integrated in the product. At. GHz, the amplifier typically provides db gain, +. dbm OIP,
More informationQPA W, 28 V, GHz GaN PA Module
Product Description The QPA2705 is an integrated 2-stage Power Amplifier Module designed for Metro Cell Base Station applications with 5 W RMS at the device output. The module is 50 Ω input and output
More informationQPA W, 28 V, GHz GaN PA Module
Product Description The QPA3503 is an integrated 2-stage Power Amplifier Module designed for massive MIMO applications with 3 W RMS at the device output covering frequency range from 3.4 to 3.6 GHz. The
More informationTGA2578-CP 2 to 6 GHz, 30W GaN Power Amplifier
TGA78-CP Applications Electronic Warfare Radar Communications Test Instrumentation EMC Amplifier Product Features Frequency Range: 2 Pout: dbm at PIN = 23 dbm PAE: >% CW Small Signal Gain: > db IM3: -
More informationTGA4535-SM-T/R. K-Band Power Amplifier. Product Description. Product Features. Functional Block Diagram. Ordering Information.
TGA4-SM Product Description The TriQuint TGA4-SM is a with integrated power detector. The TGA4-SM operates from 21.2 23.6 GHz and is designed using TriQuint s power phemt production process. The TGA4-SM
More informationTGA2594-HM GHz GaN Power. Product Description. Product Features. Functional Block Diagram. Applications. Ordering Information
TGA94-HM Product Description Qorvo s TGA94-HM is a packaged power amplifier fabricated on Qorvo s. um GaN on SiC process (QGaN). Operating from 27 to 31 GHz, the TGA94- HM achieves 36.5 dbm saturated output
More informationTQL9093. Ultra low noise, Flat Gain LNA. Applications. Product Features. Functional Block Diagram. General Description.
Applications Repeaters / DAS Mobile Infrastructure LTE / WCDMA / CDMA / GSM General Purpose Wireless TDD or FDD systems Product Features 0.6-4.2 GHz Operational Bandwidth Ultra low noise figure, 0.67 db
More informationTGA2814-CP 3.1 to 3.6 GHz, 80W GaN Power Amplifier
Applications Radar Product Features Frequency Range:.1. GHz Pout: 9 dbm at PIN = 7 dbm PAE: 5 % Pulsed Power Gain: db at PIN = 7 dbm Bias: VD = V, IDQ = ma, VG = - V typical, pulsed (PW = 15 ms, DC = %)
More informationGHz WLAN/BT LTE Co-Existence Filter
Applications WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TDLTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters Highpower WLAN Access Points Applicable reject
More informationTQP3M9035 High Linearity LNA Gain Block
Applications Repeaters Mobile Infrastructure LTE / WCDMA / CDMA / GSM General Purpose Wireless TDD or FDD systems Product Features 2x2mm 8-lead DFN plastic package Functional Block Diagram 5-4 MHz.66 db
More informationTGA2583-SM 2.7 to 3.7 GHz, 10 W GaN Power Amplifier
Applications Commercial and Military Radar QFN 5x5 mm 32L Product Features Functional Block Diagram Frequency Range: 2.7 3.7 GHz PSAT:.5 dbm PAE: > 50 % Small Signal Gain: 33 db Return Loss: > 12 db Bias:
More informationTQP MHz Power Amplifier. General Description. Product Features. Functional Block Diagram. Ordering Information
General Description The is a high-efficiency two-stage power amplifier in a low-cost surface-mount package. The amplifier is able to achieve 31% power added efficiency at +27 dbm output power while operating
More informationMHz BAW Filter
Applications Satellite Radio antenna modules Satellite Radio devices Suitable for Automotive applications Compliant to the AECQ0 Grade 2 reliability standard CSP 1713, 1.7 X 1.3 X 6 mm Product Features
More informationQPC1006EVB GHz High Power GaN SP3T Switch. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information
0.15 2.8 GHz High Power GaN SP3T Switch Product Overview Qorvo s is a Single-Pole, Triple Throw (SP3T) switch fabricated on Qorvo s QGaN25 5um GaN on SiC production process. Operating from 0.15 to 2.8
More informationTGA3503-SM 2-30 GHz GaAs Wideband Gain Block
Applications General Purpose Wideband Gain Block Electronic Warfare Military & Commercial Radar Military Communications Commercial Communications Instrumentation Product Features Frequency Range: 2 3 GHz
More informationGHz WLAN/BT LTE Co-Existence Filter
Applications WiFi bandpass filter that enables the coexistence of 3G/4G/LTE/TDLTE & WiFi signals Highpower WLAN Access Points and Small Cells Bandedge filtering of WiFi signal emissions Smart Meters and
More informationTQM8M GHz Digital Variable Gain Amplifier
Applications Wireless Infrastructure Fixed Wireless Microwave and Satellite Radio IF and RF Applications General Purpose Wireless Product Features Integrates DSA + Amp Functionality 50 4000 MHz Broadband
More informationTGA2760-SM GHz Power Amplifier
Applications Point-to-Point Radio -Lead 8.0 x.0 x 2 mm Package Product Features Functional Block Diagram Frequency Range: 9.5 12 GHz Power: +42 dbm Psat Gain: 33 db Integrated Power Detector Bias: V D1
More informationTGL GHz Voltage Variable Attenuator
Applications Commercial and Military Radar Electronic Warfare Satellite Communications Point to Point Radio Instrumentation General Purpose Product Features Functional Block Diagram Frequency Range: 2
More informationTGS2355 SM EVB GHz 100 Watt GaN Switch. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information
Product Overview Qorvo s TGS2355 SM is a Single-Pole, Double Throw (SPDT) reflective switch fabricated on Qorvo s QGaN25 0.25um GaN on SiC production process. Operating from 0.5 to 6GHz, the TGS2355 SM
More informationApplications Ordering Information
Applications Repeaters Mobile Infrastructure Defense/Aerospace LTE / WCDMA / EDGE / CDMA General Purpose Wireless IF amplifier, RF driver amplifier Product Features 5-4 MHz Flat gain (14.7 ±.3 db) from.5
More informationTGA3504-SM 2-30 GHz GaAs Wideband Gain Block
TGA54-SM Applications General Purpose Wideband Gain Block Electronic Warfare Military & Commercial Radar Military Communications Commercial Communications Instrumentation Product Features Frequency Range:
More informationTGL2767-SM-EVB. 2 31GHz Voltage Variable Attenuator. Product Description. Product Features. Applications Block Diagram. Ordering Information
Product Description The TGL2767 SM is a packaged wideband voltagevariable attenuator using Qorvo's production.15um GaAs phemt process (QPHT15). Operating from 2 31 GHz, the TGL2767 SM offers > 2 db of
More informationTGA2818-SM S-Band 30 W GaN Power Amplifier
S-Band 3 W GaN Power Amplifier Applications Military Radar Civilian Radar Wideband Amplifiers Product Features Functional Block Diagram Frequency Range: 2.8-3.7 GHz Pout: >.5 dbm (Pin=27 dbm) Large Signal
More informationQPB3311SR. 15 db Return Path Amplifier MHz. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information
Product Overview The is an HBT single ended RF amplifier IC operating as return path amplifier capable of supporting DOCSIS 3.1 applications. This IC is designed to provide a low noise, high gain option
More informationQPL9065SR. Ultra Low-Noise 2-Stage Bypass LNA. Product Description. Product Features. Applications. Functional Block Diagram. Ordering Information
QPL965 Product Description The QPL965 is a high-linearity, ultra-low noise 2-stage gain block amplifier module with a bypass mode functionality integrated to the second stage in the product. At 1.95 GHz,
More informationQPC7336TR13. 45MHz to 1218MHz Variable Equalizer. Product Description. Product Features. Functional Block Diagram. Applications. Ordering Information
45MHz to 1218MHz Variable Equalizer Product Description The QPC7336 is a voltage controlled variable equalizer employing SOI attenuator, optimized for DOCSIS 3.1 operation between 45MHz and 1218MHz. 14
More informationQPC GHz 50 W GaN SPDT Switch. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information
.15 2.8 GHz 5 W GaN SPDT Switch Product Overview Qorvo s is a Single-Pole, Double Throw (SPDT) switch fabricated on Qorvo s QGaN25.25um GaN on SiC production process. Operating from.15 to 2.8 GHz, the
More informationQPB9318 Dual-Channel Switch LNA Module
9 Product Overview The is a highly integrated front-end module targeted for TDD base stations. The switch module integrates a two-stage and a high power switch in a dual channel configuration. Power down
More informationTQM8M9077 PCB GHz Digital Variable Gain Amplifier. Applications. Product Features. Functional Block Diagram. General Description
TQM8M977 Applications Wireless Infrastructure Fixed Wireless Microwave and Satellite Radio IF and RF Applications General Purpose Wireless Product Features Integrates DSA + Amp Functionality 5 4 MHz Broadband
More informationTQM7M5013 Quad-Band Input Power Controlled EDGE PAM
Applications Quad-Band GSM850 / GSM900 / DCS / PCS GSM / EDGE / WEDGE Handsets GSM / EDGE / WEDGE Wireless Cards Product Features Digital Control Interface Low Current At Backed-Off Power Levels Input
More informationQPC GHz Phase Shifter with Integrated SPDT
QPC1 Product Description Qorvo s QPC1 integrates a 5-bit digital phase shifter and a SPDT switch inside a small 6x5mm surface mount package. Individually, the Qorvo products include the TGP21 phase shifter
More informationTQP7M W High Linearity Amplifier. Applications. Ordering Information. Part No. Description
Applications Repeaters Mobile Infrastructure CDMA / WCDMA / LTE General Purpose Wireless Product Features 3-pin SOT-89 Package Functional Block Diagram 4-4 MHz +27.5 dbm P1dB +44 dbm Output IP3 GND 4 17.8
More informationTGA2813-CP 3.1 to 3.6 GHz, 100W GaN Power Amplifier
Applications Radar Product Features Frequency Range: 3.1 3.6 GHz Pout: 5 dbm (at PIN = 27 dbm) Power Gain: 23 db (at PIN = 27 dbm) PAE: 51 % CW Bias: VD = pulsed (PW = 15 ms, DC = 3 %), IDQ = 3 ma, VG
More informationTGL2226-SM GHz 6-Bit Attenuator
Applications Commercial and Military Radar Electronic Warfare Satellite Communications Point to Point Radio General Purpose Product Features Functional Block Diagram Frequency Range:.1-15 GHz 6-Bit Digital
More informationTQP4M9071 High Linearity 6-Bit, 31.5 db Digital Step Attenuator
Applications Mobile Infrastructure LTE / WCDMA / CDMA / EDGE Test Equipments and Sensors IF and Applications General Purpose Wireless 24-pin 4x4mm leadless QFN package Product Features Functional Block
More informationTGA2625-CP GHz 20 W GaN Power Amplifier
Product Description Qorvo s is a packaged high-power X-Band amplifier fabricated on Qorvo s QGaN25 0.25 um GaN on SiC process. Operating from 10 to 11 GHz, the TGA2625- CP achieves 42.5 dbm saturated output
More informationAbsolute Maximum Ratings Parameter Rating Unit Voltage 6.0 V Maximum input power (0.6 GHz to 2.5 GHz), RF1, RF2 +28 dbm Operating temperature -30 to +
Product Overview The is a single-pole double-throw (SPDT) switch designed for general purpose switching applications which require very low insertion loss and medium power handling capability. The is ideally
More informationTGA2567-SM 2 20 GHz LNA Amplifier
Product Description Qorvo s is a LNA Gain Block fabricated on Qorvo s proven.um phemt production process. The operates from 2 to 2 GHz and typically provides 19 dbm of 1dB compressed output power with
More informationTGA2214-CP 2 18 GHz 4 W GaN Power Amplifier
Product Description Qorvo s TGA2214-CP is a packaged wideband power amplifier fabricated on Qorvo s QGaN15 0.15 µm GaN on SiC process. Operating from 2 to 18 GHz, the TGA2214- CP generates > 4 W saturated
More informationTGA2612-SM 6 12 GHz GaN LNA
Product Description Qorvo s is a packaged broadband Low Noise Amplifier fabricated on Qorvo s QGaN 0.um GaN on SiC process. Covering 6, the TGA2612- SM typically provides >23 dm small signal gain, 19 dbm
More informationTGA FL 20W Ku-Band GaN Power Amplifier
TGA279-2-FL Applications Ku-band Communications Product Features Frequency Range: 14.0 1. GHz P SAT : 43 dbm PAE: 27% Small Signal Gain: db Integrated Voltage Detector Bias: V D = 2 V, I DQ = 1.0 A, V
More informationRFSW1012SR. Broadband SPDT Switch. Product Overview. Key Features. Functional Block Diagram. Ordering Information
Product Overview The is a single-pole double-throw (SPDT) switch designed for applications requiring very low insertion loss and high power handling capability. The excellent linearity performance of the
More informationQPM GHz Limiter/Low-Noise Amplifier. Product Description. Product Features. Functional Block Diagram. Ordering Information.
QPM1 Product Description The Qorvo QPM1 is an integrated limiter/lna providing robust, high performance over the 2 2GHz frequency range. The QPM1 delivers 17 db small signal gain with gain control and
More informationTGA2578-CP 2 to 6 GHz, 30W GaN Power Amplifier
2 to, W GaN Power Amplifier Applications Electronic Warfare Radar Communications Test Instrumentation EMC Amplifier Product Features Frequency Range: 2 Pout: dbm at PIN = 23 dbm PAE: >% CW Small Signal
More informationTQQ7101EVB Band 1 Duplexer
Prouct Overview The is an exceptionally high performance AW uplexer for LTE an 1. This filter is house in a compact 3. mm x 3. mm package for base station applications. Low insertion loss, couple with
More informationQPC GHz 6-Bit Digital Phase Shifter
Product Description The Qorvo is a packaged 6-bit digital phase shifter fabricated on Qorvo s high performance.15 um GaAs phemt process. It operates over 2.5-4 GHz while providing 36 of phase coverage
More informationTGA FL 2.5 to 6GHz 40W GaN Power Amplifier
2.5 to 6GHz 4W GaN Power Amplifier Applications Communications Electronic Warfare Test Instrumentation EMC Amplifier Product Features Frequency Range: 2.5 to 6 GHz P SAT : 46.5 dbm @ PIN = 26dBm, CW PAE:
More informationQPC3223TR7. 50 MHz to 6000 MHz Digital Step Attenuator. Product Description. Product Features. Functional Block Diagram.
5 MHz to 6 MHz Digital Step Attenuator Product Description The is a 2-bit digital step attenuator (DSA) that features high linearity over the entire 18 db gain control range in 6 db steps. The uses a parallel
More information