Hi-Vis Yellow 5/4/2010 TEST FOR ALL MATERIALS Pass/ Test/Method Section ANSI/ISEA 107 Requirement Test Result Fail/ NA

Transcription

1

2 ANSI/ISEA Background Material Testing Report Page 2 of 5 TEST FOR ALL MATERIALS Determination of Color Test specimen must fulfill the As submitted: ASTM E colorimetric requirements of x = (Single layer) 9.2 Table 2 for background material y = %Y = After 40x Xenon x = y = %Y = Determination of Color Test specimen must fulfill the As submitted: ASTM E colorimetric requirements of x = Pass (Two layers of the same 9.2 Table 2 for background material y = Pass material) %Y = Pass After 40x Xenon x = Pass y = Pass %Y = Pass Colorfastness Dry Pass Crocking Wet Pass AATCC Colorfastness Color Change Pass Perspiration Staining 3.0 Acetate: 5.0 Pass AATCC Cotton: 5.0 Pass Nylon: 5.0 Pass Polyester: 5.0 Pass Acrylic: 5.0 Pass Wool: 5.0 Pass Bursting Strength (ted) N (27.2 kgf) (60 lbf) 163 lb. Pass ASTM D Tear Resistance (Woven) N (1326 gf) (2.92 lbf) ASTM D Average force machine Average force cross-machine

3 ANSI/ISEA Background Material Testing Report Page 3 of 5 TESTED AS CARE LABEL DICTATES Colorfastness Color change 4.5 Domestic/Commercial Laundry Table 3 Staining 3.0 Acetate: AATCC A Cotton: 160 F Nylon: Polyester: Acrylic: Wool: Colorfastness Color change Pass Domestic/Commercial Laundry Table 3 Staining 3.0 Acetate: 4.0 Pass AATCC A Cotton: 4.5 Pass 105 F Nylon: 4.0 Pass (modified) Polyester: 4.5 Pass Acrylic: 4.5 Pass Wool: 4.5 Pass Colorfastness Color change Pass Water Table 3 Staining 3.0 Acetate: 4.0 Pass AATCC Cotton: 4.5 Pass Nylon: 4.0 Pass Polyester: 4.5 Pass Acrylic: 4.5 Pass Wool: 4.5 Pass Colorfastness Fading 4.0 Hypochlorite Bleaching Table 3 (commercial) AATCC A Colorfastness Fading Pass Hypochlorite Bleaching Table 3 (domestic) AATCC A Colorfastness Color change Pass Hot-pressing Table 3 Staining Pass AATCC Colorfastness Color change 4.0 Dry cleaning Table 3 AATCC

4 ANSI/ISEA Background Material Testing Report Page 4 of 5 TESTED AS CARE LABEL DICTATES (cont) Domestic L +/- 4% W +/- 2% AATCC (3) F L +/- 7% W +/- 5% Pass Pass Commercial L +/- 4% W +/- 2% AATCC IIIc-A and/or 145 o F L +/- 7% W +/- 5% Dry Cleaning L +/- 4% W +/- 2% AATCC L +/- 7% W +/- 5%

5 ANSI/ISEA Background Material Testing Report Page 5 of 5 TESTED AS CARE LABEL DICTATES (cont) Water Repellency new AATCC after 5 washings Water Resistance < 1 gram of water penetration Initial AATCC After 5 washings Waterproof cm new and after 5 washings Initial AATCC After 5 washings Breathability 7.6 B g/m²/24 hr microporous ASTM E96-05 BW g/m²/24 hr Procedure B or BW hydrophilic CIE 1931 (x,y) Chromaticity Diagram Yellow-Green Coordinates Original After 40 AFU