PumpSmart Commissioning Process
|
|
- Berenice Simpson
- 6 years ago
- Views:
Transcription
1 PumpSmart Commissioning Process 1. Complete the PumpSmart Warranty Registration form. The warrantee registration is our method for determining if an installation has been commissioned properly and to identify how an application is configured. Completion of the first page is mandatory for the extension of the warranty to 2 years. Except for the shaded boxes, all sections must be completed. Comments to first page: - Drive Configuration Code: This code may be found on the drive manufacturer nameplate. Typical examples are: ACS800-U (ABB ACS kva drive) 20BD011A3AYNANA0 (AB PowerFlex kva drive) - Installation Checklist: Refer to the configuration and installation manuals for acceptable qualities of these requirements. - Electrical Checks: All information, except meggar and operation mode, must be competed. Mega-Ohm meter checks are recommended when PumpSmart is being applied upon existing motors or if any drive faults occur during commissioning. The NOTES page is to be used for comments or exceptions that are not captured on the first page. Space is included for sketching of the system. This is recommended, however not mandatory. Completion of the parameter listing is recommended for later references and submittal to the customer. It is not necessary for PumpSmart certified personnel be present for the initial set-up/configuration of the drive. Inspection and completion of this registration is required within 20 days of initial start-up however. 2. Fax or mail to PumpSmart Control Solutions within 20 days of initial start-up: PumpSmart Control Solutions Warranty Registration 240 Fall Street - Main Office Seneca Falls, NY Fax: pumpsmart@itt.com (Subject Line: WARRANTY REGISTRATION) 3. Confirmation of warrantee extension may be made by calling the PumpSmart Control Solutions applications group at (315)
2 MANDATORY PAGE Company Name Address L1 Address L2 City / State / Zip Contact Name Telephone Purchased From Sales Contact Telephone Product PS200 PF700 Drive Configuration Code ITT S/N Drive S/N S/W Version: Application: Application Macro Single Pump Process Multi-Pump Process Speed Control Control Communication Discrete I/O - Analog I/O Profibus Modbus/Modbus + Other: Pump Information: Manufacturer: Control Mode (N/A Speed Control Macro) Pressure Flow Level Other SMART FLOW Setpoint Control Keypad Analog Input Offset / Multivariable Control System Curve Compensation Protection Pump Protect Limit Advanced Pump Protection Secondary Protection Protection Alarm Mode Alarm Only Alarm & Control Model Number: Installation Checklist Check out of direct sunlight Check proper ambient temperature Check proper grounding Check cable connections Check free flow of cooling air Electrical Checks Motor Data HP FLA RPM VAC Check wire runs & conduit Check all mechanical connections Check I/O - Digital/Analog/Fieldbus Check motor rotation E-Stop/Permissive (DIIL - Jumper) Motor Cable Length Approx: Input base RPM Phase A-B Input base RPM Phase A Mega-Ohm Meter Reading Phase B-C Phase B Meggar type Phase C-A Phase C 500 V 1000 V Output base RPM Output base RPM Operation Mode DTC [Default] Phase A-B Phase A Scalar Phase B-C Phase B Phase C-A Phase C Additional Notes Attached (Optional) Parameter Listing Attached (Optional) Performed By Registration Number Customer Signature Date
3 NOTES PAGE Comments/Notes System Sketch Transmitters & Switches Pump Valves xx PT - Pressure FT - Flow LT - Level TT - Temperature PS - Pressure FS - Flow LS - Level TS - Temperature C - Centrifugal P - Positive Displacement ## - Number Stages Check Valve Valve Page of ITT S/N:
4 PARAMETER DEFAULT CURRENT PARAMETER DEFAULT CURRENT PARAMETER LOCK LOCKED AUTO LOCKS MAXIMUM FREQ PASS CODE 358 N/A MINIMUM FREQ LOCAL; LOCK OFF CONFIG SPEED MIN 0 RPM PARAMETER SAVE DONE N/A STP DELAYMIN SPD 0 SEC LANGUAGE ENGLISH(AM) RESTART VALUE 100% APPLICATION MACRO SINGLE PUMP RESTART DELAY 0 SEC MODE SELECT PRESSURE PRIMING DELAY 0 SEC MOTOR NOM VOLTAGE REQUIRED CRITICAL SPEED MOTOR NOM CURRENT REQUIRED CRITICAL SPEED MOTOR NOM FREQ 14.12NCR WIDTH MOTOR FL RPM REQUIRED AI2 UNIT PSIG MOTOR NOM POWER REQUIRED AI1 UNIT NONE MOTOR CTRL MODE DTC AI3 UNIT NONE MOTOR ID RUN NO SET1/SET2 SELECT SETPOINT APPLICATION RESTORE NO SETPOINT 1 SELECT KEYPAD OTHER MOTOR VOLT AI2 MAX CTRL BOARD SUPPLY INTERNAL AI2 MIN START/STOP 2 WIRE DI SETPOINT 2 SEL KEYPAQD AUTO RESTART OFF AI1 MAX STOP FUNCTION RAMP AI1 MIN MOTOR JOG DISABLED N/A AI3 MAX START DELAY 0s AI3 MIN SPEED OVERRIDE DISABLED LOCAL REF SELECT PROC VAR SPD OVERRIDE REF KEYPAD MINIMUM AI1 2 VDC SPD OVRD DFLT SP RPM MAXIMUM AI1 10 VDC SP OVRRD PMP PROT ENABLED SCALE AI1 100% ACCEL TIME 5S FILTER AI1 0.1S DECEL TIME 5S PRESSURE INVERT AI1 FLOW MINIMUM AI2 4 ma DP FLOW MAXIMUM AI2 20 ma P-GAIN LVL/TEMP-2.5 PRESSURE SCALE AI2 100% FLOW FILTER AI2 0.1S DP FLOW INVERT AI I-TIME LVL/TEMP MINIMUM AI3 4 ma D-TIME MAXIMUM AI3 20 ma PID DERIV FILTER SCALE AI3 100% PID INTERGRATION ON FILTER AI3 0.1S CONTROL PARAM SPEED INVERT AI3 NO MAXIMUM SPEED AUTO DEFAULT AI1 CONFIG NOT USED MINIMUM SPEED AUTO DEFAULT AI2 CONFIG NOT USED
5 PARAMETER DEFAULT CURRENT PARAMETER DEFAULT CURRENT AI3 CONFIG NOT USED PUMP ADDRESS RELAY RO1 OUTPUT READY M/F COMM L DELAY 4S RO1 TON DELAY 0S CHS COM LOS CTRL COAST STOP RO1 TOFF DELAY 0S MANUAL SWITCH DISABLED RELAY RO2 OUTPUT RUNNING TX CONFIG RO2 TON DELAY 0S COND 1 SOURCE RO2 TOFF DELAY 0S COND1 WRN LIM HI RELAY RO3 OUTPUT FAULT COND1 WRN LIM LO RO3 TON RELAY 0S COND 1 ALARM DISABLED RO3 TOFF DELAY 0S COND1 ALRM LIM HI ANALOG OUTPUT 1 NOT USED COND1 ALRM LIM LO INVERT AO1 NO COND 2 SOURCE MINIMUM AO1 4 MA COND 2 WRN LIM HI FILTER AO1 0.1S COND2 WRN LIM LO 0% SCALE AO1 100% COND 2 ALARM DISABLED ANALOG OUTPUT 2 NOT USED COND2 ALRM LIM HI INVERT AO2 NO COND2 ALRM LIM LO MINIMUM AO2 4 MA COND RESP DELAY 20S FILTER AO2 0.1S MIN SPD STP DLY 60S% SCALE AO2 100% PROC SNSR FAILURE LAST SPEED REGULATION MODE NORMAL COND SNSR FAILURE WARNING MULTIVAR CTL OFF KEYPAD FAILURE FAULT LEVEL 1 0% DIGIT RST CONFIG BOTH SPT LO MOTOR THERM PROTt WARNING LO INTRCPT 0% MOTOR THERM P MODE DTC LEVEL 2 % 100% MOTOR THERM TIME SPT HI MOTOR LOAD CURVE HI INTRCPT B% 0% ZERO SPEED LOAD PRESS INCR SPEED 1200 RPM BREAK POINT PRESS INCR % 0% STALL FUNCTION NOT SEL MODE SYNCHRONOUS STALL FREQ HI VALUE DECREASE 5% STALL TIME 10S VALUE INCREASE 5% UNDERLOAD FUNC NOT SEL STAGE 2 98% UNDERLOAD TIME STAGE 3 98% UNDERLOAD CURVE STAGE 4 98% MOTOR PHASE LOSS NOT SEL 22.07SWITCH LEAD 48 HRS GROUND FAULT PROOF TIME 20 S COMM FLT FUNC DESTAGE 2 75% MAIN REF DS T-OUT DESTAGE 3 85% AUX DS T-OUT DESTAGE 4 92% IO CONFIG FUNC MIN PUMPS ON PUMP PROTECT CTRL
6 PARAMETER DEFAULT CURRENT PARAMETER DEFAULT CURRENT PROTECTION LIMIT 97% HYD EFF FACTOR PROTECTION DELAY 0 SEC HYD EFF EXPNT ERROR RESET CALC SO SOURCE AFFINITY PUMP RESET DELAY 60S SO EXPNT 3 SECONDARY PROTECT A DISABLED 29.1O P MAG CORR SECONDARY PROTECT B DISABLED QACT FILTER 1.0S Q ACT SOURCE SMARTFLOW SG SELECT MIN FLOW CTRL DISABLED SG MIN (SG MIN ) MIN FLOW M3/HR SG MAX (SG MAX ) DRY RUN CTRL DISABLED SG RATE (SG RATE ) NRUN OUT CTRL DISABLED T MIN (T MIN ) RUNOUT FLOW 0% T MAX (T MAX ) MAXIMUM CURRENT 200% T RATE (T RATE ) MAXIMUM TORQUE 300% FIELDBUS NO OVERVOLTAGE CTRL ACTIVATED COMM PROFILE CSA 2.8/ UNDERVOLTAGE CTRL ACTIVATED MODULE TYPE AUTO DEFAULT P MOTORING LIM START FUNCTION DC MAGN P GENERATING LIM STATION NUMBER $/kwh 0.00$ BAUD RATE BASELINE POWER PARITY ODD ENERGY SAVE METHOD OP MAIN DS REF ENERGY SAVE RESET DISABLED AUX DS REF kwh AT RESET VIEWABLE ONLY N/A AUX DS REF OP HRS AT RESET VIEWABLE ONLY N/A AUX DS REF AUTO RESET TRIALS MAIN DS SOURCE TRIAL TIME 180 S AUX DS SOURCE VFD RESET DELAY 15 S MAIN DS STATUS WORD OVERCURRENT DISABLED MAIN DS ACT OVERVOLTAGE DISABLED MAIN DS ACT UNDERVOLTAGE DISABLED AUX DS ACT PROCESS SENSR ERR DISABLED AUX DS ACT TYPE DISABLED AUX DS ACT BEP FLOW AMB TEMP FUNC YES RATED SPD MAX SPEED CTRL BD MAX TEMP BEP POWER 80% SOFTWARE VERSION SO PWR 36% SOFTWARE DATE: Shaded Parameters require a higher level passcode of 564 entered in Parameter PASSCODE
AQUAVAR CPC. Modbus Communications (Software Version 204 and later)* INSTRUCTION MANUAL ADAQCPC R1
INSTRUCTION MANUAL ADAQCPC R1 AQUAVAR CPC Modbus Communications (Software Version 204 and later)* ADDENDUM TO THE INSTALLATION AND OPERATION MANUAL (IM167) * Aquavar CPC units with software 204 and later
More informationNX Series Inverters. HVAC Pocket Programming Guide
NX Series Inverters HVAC Pocket Programming Guide HVAC Pocket Programming Guide HVAC Pocket Programming Guide / Contents This guide provides a single reference document for the user of NXL HVAC (product
More informationNX series Constant and variable torque Variable Speed Drives for induction motors
Honeywell All in One Application Manual NX series Constant and variable torque Variable Speed Drives for induction motors Subject to changes without notice CONTENTS NX "All in One" APPLICATION MANUAL INDEX
More informationvacon nx all in one application manual ac drives Phone: Fax: Web: -
vacon nx ac drives all in one application manual vacon 1 INDEX Document ID:DPD00903A Revision release date: 30.3.2012 1. Basic Application...5 1.1. Introduction...5 1.1.1. Motor protection functions in
More informationCHAPTER AC DRIVE PARAMETERS. In This Chapter...
CHAPTER AC DRIVE 4 PARAMETERS In This Chapter... GS2 Parameter Summary....................4 2 Detailed Parameter Listings.................4 11 Motor Parameters........................4 11 Ramp Parameters.........................4
More informationBACnet- MS/TP COMMUNICATION V
- MS/TP COMMUNICATION V1.00.08.17 11.1 Introduction The VFD can be controlled and monitored through the BACnet MS/TP protocol over an RS-485 connection. The VFD operates as an MS/TP master device, which
More informationvacon nx ac drives all in one application manual
vacon nx ac drives all in one application manual PREFACE VACON 3 PREFACE Document ID: DPD00903F Date: 14.8.2017 Software code: Basic Application = ASFIFF01 Standard Application = ASFIFF02 Local/Remote
More informationGS1 Parameter Summary Detailed Parameter Listings...4 9
CHAPTER AC DRIVE 4 PARAMETERS Contents of this Chapter... GS1 Parameter Summary...............................4 2 Detailed Parameter Listings..............................4 9 Motor Parameters.........................................4
More informationControl chain diagrams
Control chain diagrams 565 Control chain diagrams What this chapter contains The chapter presents the reference chains of the drive. The control chain diagrams can be used to trace how parameters interact
More informationNXL HVAC APPLICATION MANUAL Programming manual for NXL HVAC drives
NXL HVAC APPLICATION MANUAL Programming manual for NXL HVAC drives Page 2 (68) Index Honeywell HVAC Application (Software [ALFIQ105] Ver.2.09) INDEX 1. INTRODUCTION... 3 2. CONTROL I/O... 3. HVAC APPLICATION
More informationCHAPTER KEYPAD OPERATION AND QUICKSTART. In This Chapter... The GS2 Digital Keypad GS2 Quickstart...3 6
CHAPTER KEYPAD OPERATION 3 AND QUICKSTART In This Chapter... The GS2 Digital Keypad.....................3 2 LED Display.........................................3 2 LED Indicators.......................................3
More informationMulti-purpose Control Application II
VACON CX /CXL/CXS FREQUENCY CONVERTERS Multi-purpose Control Application II USER'S MANUAL Subject to changes without notice Vacon Page 1 Multi-purpose Control Application II (par. 0.1 = 0) CONTENTS 1 General...
More informationvacon 100 flow ac drives application manual
vacon 100 flow ac drives application manual vacon 1 TABLE OF CONTENTS Document: DPD01083A Version release date: 16.11.12 Corresponds to software package FW0159V121106.vcx 1. Vacon 100 FLOW - Quick Startup
More informationuser's manual nx frequency converters beam pump application asfiff13
user's manual nx frequency converters beam pump application asfiff13 2 vacon Introduction INDEX 1. Introduction... 3 2. Commissioning... 4 2.1 Commissioning unbalanced load... 4 2.2 Commissioning balanced
More informationM-Max series drives. The next generation of OEM drives
M-Max series drives The next generation of OEM drives Continue learning more about Eaton drives, services and solutions. Please visit us at: www.eaton.com/drives CD CONTENTS MaxConnect MaxLoader Firmware
More informationACH550 HVAC Drive Submittal
ACH550 HVAC Drive Submittal DATE: PROJECT NAME: CONTRACTOR: ENGINEER: SUBMITTED BY: SUBMITTALS FOR: RECORD APPROVAL (Return a copy of the approved submittal) ACH550 Features Standard Features UL and cul
More informationPowerFlex 400 AC Drive Guide Specification
PowerFlex 400 AC Drive Guide Specification Adjustable Frequency Drives 3.0 50HP @ 200 to 240V AC 3.0 350HP @ 380 to 480V AC PART 1 GENERAL 1.01 Quality Assurance A. The manufacturer shall have minimum
More informationABB machinery drives. Supplement to Users Manual ACS355 Low ambient start (+N828)
ABB machinery drives Supplement to Users Manual ACS355 Low ambient start (+N828) List of related manuals Drive manuals and guides ACS355 user s manual ACS355 drives with IP66/67 / UL Type 4x enclosure
More informationINDEX. i 1. B Braking Resistor Dimensions: A 24 Braking Resistors: A 20 Braking Units: A 20. DURAPULSE AC Drive User Manual
INDEX A AC Drive Cover: 1 6 Dimensions: 2 4 External Parts and Labels: 1 6 Heat Sink Fins: 1 6 Input Mode Switch (Sink/Source): 1 6 Introduction to DuraPulse GS3 AC drive: 1 3 Keypad: 1 6 Model Number
More informationStandard Specification for PS220 Cabinet (floor standing enclosure) Low Harmonic Adjustable Speed Drives Rated from 250 to 4250 HP at 480 to 690 VAC
Standard Specification for PS220 Cabinet (floor standing enclosure) Low Harmonic Adjustable Speed Drives Rated from 250 to 4250 HP at 480 to 690 VAC Part 1 - GENERAL 1.01 DESCRIPTION A. This specification
More informationInstallation, Programming Operation, & Maintenance Manual V
Base Drive, Bypass Drive, Drive with Disconnect 200~480V (3~28A) Q-Link Manual Fan & Pump Optimized Variable Frequency Drive Installation, Programming Operation, & Maintenance Manual V2.00.09.17 CAUTION,
More informationVariable Frequency Drive / Inverter (0.4 ~ 280kW)
Variable Frequency Drive / Inverter (0.4 ~ 280kW) & Standard Features Configuration Comparison Comparison Table Enclosure IP00 IP20 NEMA 1 Rating Single phase 0.4 2.2kW 0.4 1.5kW Three phase 0.4 4kW Constant
More informationsafety Doc: DPD00714C, Released: vacon 1 ONLY A COMPETENT ELECTRICIAN IS ALLOWED TO CARRY OUT THE ELECTRICAL INSTALLATION! 1.
safety Doc: DPD00714C, Released: 10.28.2011 vacon 1 This quick guide includes the essential steps for easy installation and setup of your Vacon 10 frequency converter. Before commissioning your drive,
More informationEnhanced PID for Air Compressors F7 Drive Software Technical Manual
Software Number: VSF11020X, Drive Models: CIMR-F7UXXXXXX-096 Document Number: TM.F7SW.096, Date: 08/01/05, Rev: 05-08 Enhanced PID for Air Compressors F7 Drive Software Technical Manual This document is
More informationP-SERIES VFD 1-40HP (200~230VAC), 1-400HP (380~480VAC),3Ø Dual Rated for Constant & Variable Torque Integrated PID Control
P-SERIES VFD 1-40HP (200~230VAC), 1-400HP (380~480VAC),3Ø Dual Rated for Constant & Variable Torque Integrated PID Control NEW FIRMWARE MAKES SETUP A SNAP Application based commissioning allows parameters
More informationThe GS1 Digital Keypad LED Display Function Keys Displaying the Status of the GS1 AC Drive Programming the GS1 AC Drive...
CHAPTER KEYPAD OPERATION 3 AND QUICKSTART Contents of this Chapter... The GS1 Digital Keypad................................3 2 LED Display..............................................3 2 Function Keys............................................3
More informationSV9000 SVReady USER MANUAL CONTENTS OPEN SV9000 USER MANUAL. SV9000 Page 0-1
SV9000 Page 0-1 SV9000 SVReady USER MANUAL CNTENTS A General...0-2 B Application selection...0-2 C Restoring default values of application parameters...0-2 D Language selection...0-2 1 Standard Control
More informationVFD - D700 Series Specifications. The latest low-cost variable speed control solution for centrifugal pumps.
VFD - D700 Series Specifications The latest low-cost variable speed control solution for centrifugal pumps. Built-in PID Control to maintain pressure, flow, measured value, and much more 125% overload
More information1. Institute of Electrical and Electronic Engineers (IEEE) a. Standard , IEEE Guide for Harmonic Content and Control.
Section 16680 VARIABLE SPEED DRIVE SYSTEMS OR AFD Part I - GENERAL I.01 Description A. This specification is to cover a complete adjustable frequency motor drive consisting of a pulse width modulated (PWM)
More informationvacon nxp arfiff30 user manual generator application ac drives
vacon nxp ac drives arfiff30 generator application user manual vacon 1 Vacon Generator application INDEX Document code: DPD01916A Software code: ARFIFF30V073 Date: 15.11.2016 VACON GENERATOR APPLICATION...
More informationvacon 100 flow ac drives application manual
vacon 100 flow ac drives application manual PREFACE VACON 3 PREFACE Document ID: DPD01083D Date: 15.10.2014 Software version: FW0159V010 ABOUT THIS MANUAL This manual is copyright of Vacon Plc. All Rights
More informationAV-300i Specifications. GE Industrial Systems. Product Specifications. A New Concept in Automation. AV-300i
GE Industrial Systems Product Specifications AV-300i A New Concept in Automation. TM 1 General Item Description Nominal Motor 230V, 3 Phase 15 Hp to 100 Hp 460V, 3 Phase 3/4 Hp to 200 Hp Enclosure, Standard
More informationVFD Reference Guide. In-The-Field Tool
VFD Reference Guide In-The-Field Tool NXS Basic Speed Control What You Need Drive Type (NXL, NXS) Speed Signal spec Motor nameplate data Signal Type (volts, milliamps) Range (0-10, 2-10; 0-20, 4-20) Navigating
More informationDocument code: DPD00343A Edited:
vacon 10 ac drives vacon 10 pfc user manual Document code: DPD00343A Edited: 29.4.2010 1.Safety 4 1.1 Warnings 4 1.2 Safety instructions 5 1.3 Grounding and ground fault protection 5 1.4 Before running
More informationMECHANICAL BRAKE CONTROL APPLICATION MANUAL. Software Part Number Vxx
MECHANICAL BRAKE CONTROL APPLICATION MANUAL Software Part Number 695181.Vxx 2006 Avtron Industrial Automation, Inc. March 31, 2006 Cleveland, Ohio Rev. September 24, 2008 AVTRON INDUSTRIAL AUTOMATION,
More informationFan and Pump AC Inverter
Fan and Pump AC Inverter Key Features for Fan and Pump Applications PID and Auto Energy Saving Functions. Input Phase Loss and Output Phase Loss Protection. LCD Keypad can be used to copy parameter settings
More information3. Be aware of the ambient temperature. Use the unit within the specified ambient temperature only.
This document is a short guide to how to connect, do the configuration and start the unit in the easiest way. Refer to the Instruction Manual IMAE-01, appropriate revision of Axpert-Eazy Series AC Drive
More informationComp-AC. User s Manual for type ACS 140 frequency converters from 0.12 to 2.2 kw
Comp-AC User s Manual for type ACS 140 frequency converters from 0.12 to 2.2 kw ACS 140 Frequency Converter User s Manual 3BFE 64273736 R0125 EN Effective: 8.3.2000 2000 ABB Industry Oy Safety Warning!
More informationAV-300i Specifications. Saftronics Inc. VG10 Product Specifications VG10. Dynamic Vector Drive
Saftronics Inc. www.saftronics.com TM AV-300i Specifications VG10 Product Specifications VG10 Dynamic Vector Drive 1 Category Item Description Nominal Motor 230 VAC, 3 Phase 1/4 Hp to 125 Hp 460 VAC, 3
More informationHITACHI. L100-M Series Inverter Quick Reference Guide. Hitachi Industrial Equipment Systems Co., Ltd. Single-phase Input 100V Class
HITACHI L1-M Series Inverter Quick Reference Guide Single-phase Input 1V Class Hitachi Industrial Equipment Systems Co., Ltd. Manual No. NB5741XD December 23 Caution: Be sure to read the L1 Inverter Manual
More informationTHYFREC-VT210S 400V System 37 to 315kW (C/T) 400V System 45 to 370kW (V/T) QUICK START GUIDE
MEIDEN AC SPEED CONTROL EQUIPMENT THYFREC-VT210S 400V System 37 to 315kW (C/T) 400V System 45 to 370kW (V/T) QUICK START GUIDE NOTICE 1. Read this manual thoroughly before using the VT210S, and store in
More information1. INTRODUCTION Fire Mode PID Application Parameter lists DESCRIPTION OF PARAMETERS... 8
U S E R ' S M A N U A L NX F R E Q U E N C Y C O N V E R T E R S A D D O N P A G E S F O R T H E F I R E M O D E P I D A P P L I C A T I O N F O R S M O O T H C O N T R O L INDEX 1. INTRODUCTION... 3 2.
More informationPhoenix DX Clean Power (18 Pulse) AC Drive
PHOENIX DX Phoenix DX Clean Power (18 Pulse) AC Drive Poor power quality can be costly. Nonlinear loads, including AC Drives, introduce undesirable harmonic currents into the power system that can damage
More informationAF91 Adjustable Frequency Drives Series B
Effective: January, 00 Page New Information AF9 Adjustable Model AF9 Description Model AF9 Adjustable Frequency AC Drives are designed to provide adjustable speed control of -phase motors. These microprocessor-based
More informationBACnet Protocol Implementation Conformance Statement
BACnet Protocol Implementation Conformance Statement Date: October 06, 2009 Vendor Name: Schneider Electric Product Name: Low Voltage AC Motor Drive Product Model Number: Altivar 61 Application Software
More informationGeneral Specifications FECA-TE /2010. Phone: Fax: Web:
General Specifications FECA-TE-117 06/2010 1. Standard Specifications 1) Three-phase 230V series Output ratings Input ratings Braking Item Specifications Type (FRN C1S-2U) F12 F25 F50 001 002 003 005 Nominal
More information13. Before making a service call Trip information and remedies
. Before making a service call Trip information and remedies.1 Trip causes/warnings and remedies When a problem arises, diagnose it in accordance with the following table. If it is found that replacement
More informationS11 Adjustable Speed Drive Engineering Specification
PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba S11 AC Variable Frequency Drives, 6 pulse for 3- phase 200-240VAC, 380-500VAC and single phase 200V to 240VAC. 1.1 References A. National
More informationvacon 100 hvac ac drives application manual
vacon 100 hvac ac drives application manual PREFACE VACON 3 PREFACE Document ID: DPD01696K Date: 11.04.2016 Software version: FW0065V032 ABOUT THIS MANUAL This manual is copyright of Vacon Ltd. All Rights
More informationuser's manual nx frequency converters standard lift application asfiff08
user's manual nx frequency converters standard lift application asfiff08 2 vacon Vacon Standard Lift Application (Software ASFIFF08) INDEX Document code: UD0078L Date: 23.08.2007 1. Introduction... 3 2.
More informationSJ100 Series Inverter Quick Reference Guide. Single-phase Input 200V Class Three-phase Input 200V Class Three-phase Input 400V Class
HITACHI SJ1 Series Inverter Quick Reference Guide Single-phase Input 2V Class Three-phase Input 2V Class Three-phase Input 4V Class Hitachi Industrial Equipment Systems Co., Ltd. Manual No. NB5821XD Dec.
More informationvacon nxs robust drive for heavy use
vacon nxs robust drive for heavy use the reliable choice The Vacon is a compact AC drive in the power range of 0.7 560 kw and supply voltages of 208 690 V for heavy use in machines, buildings and all branches
More information6.9 Jump frequency - Avoiding frequency resonance
E581595.9 Jump frequency - Avoiding frequency resonance : Jump frequency : Jumping width Function Resonance due to the natural frequency of the mechanical system can be avoided by jumping the resonant
More informationCET 5 Motor Protection Relay. Programming Menu Structure
CET 5 Motor Protection Relay Programming Menu Structure Menu navigation keys Menu navigation keys Escape key. Returns to previous menu. Also required to be pressed after programming is completed to ensure
More informationFrequency Inverter CFW500 V1.8X. Programming Manual
Motors I Automation I Energy I Transmission & Distribution I Coatings Frequency Inverter CFW500 V1.8X Programming Manual Programming Manual Series: CFW500 Language: English Document Number: 10002296099
More informationAV-300i Specifications. Saftronics Inc. PC10 Product Specifications PC10. Mini Vector AC Drive
Saftronics Inc. www.saftronics.com TM AV-300i Specifications PC10 Product Specifications PC10 Mini Vector AC Drive 1 (1) T hree-phas e 230V input Drive Hp 1/8 1/4 1/2 1 2 3 5 7.5 10 Nominal applicable
More informationD SERIES LM16. COMPACT DRIVE V/f and SLV CONTROL. LM16 COMPACT DRIVE V/f and SLV CONTROL
D SERIES LM16 COMPACT DRIVE V/f and SLV CONTROL LM16 COMPACT DRIVE V/f and SLV CONTROL 1 2 SERIES 1 2 page 4 page 6 Introduction Fields of application 3 page 7 4 page 8 Designation Product offer 5 6 page
More informationfor Speed Control of 0.75 to 7.5 HP Induction Motors Supply Voltage 208 to 240 V 380 to 480 V Users Manual
ACS 200 AC Drives for Speed Control of 0.75 to 7.5 HP Induction Motors Supply Voltage 208 to 240 V 380 to 480 V Users Manual ACS200-US-04B Effective 12/1/94 Supersedes 12/1/ 93 . ACS 200 AC Drives for
More informationApplication Note CTAN #287
Application Note CTAN #287 This Application Note is pertinent to the Commander SK Water Pressure PID Loop Control This application note will describe a way to utilize the Commander SK (note that the Unidrive
More informationSRC-110 Series Zone Controllers with Modbus RTU
Product sheet CT2.142 Type SRC-110-MOD SRC-110 Series Zone Controllers with Modbus RTU The SRC-110 series controllers have been designed for zone heating and cooling control. The controllers have 3 analogue
More informationE3 Adjustable Speed Drive Engineering Specification
E3 Adjustable Speed Drive Engineering Specification PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba E3 AC Variable Frequency Drives, 6 pulse for 230V and 460V. 1.1 References A. National
More informationVacon 100 Flow Course
09-01-2018 Version 18.08F Sw:FW0159V014 Vacon 100 Flow Course Version 18.08F G:\Data\Iedereen\cursussen\Frequentieregelaars\Vacon\Vacon 100 Flow versie 18.08-eng.doc Vacon 100 Flow page1 Index Index...
More informationMD310 Quick Start Manual. General-Purpose AC Drive
MD310 Quick Start Manual General-Purpose AC Drive ersion 0.1 Dated 14 th OCT, 2013 CONTENTS CHAPTER 1 PRODUCT INFORMATION... 1 1.1 Designation... 1 1.2 Nameplate... 1 1.3 General Specifications... 2 CHAPTER
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards
Change History Date Description of Change Pages / Sections Modified 8/23/17 Updated sections on System Design and Performance Requirements; Submittals; Equipment; Accessories or Special Features; Quality
More informationNEWPCC VARIABLE FREQUENCY DRIVES Section LAB RENOVATION BID OPPORTUNITY NO PAGE 1 OF SCOPE
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 8 PART 1 GENERAL 1.1 SCOPE.1 This specification shall apply to the materials, design, fabrication, inspection, and testing of 600 V Variable Frequency Drives (VFD)
More informationTECO F510 Inverter. Quick Start Guide. Step 1. Supply & Motor connection
Quick Start Guide TECO F510 Inverter This guide is to assist you in installing and running the inverter and verify that it is functioning correctly for it s main and basic features. For detailed information
More informationContents. Safety Information and Precautions Product Information Operation Panel (Keypad & Display) Quick Setup...
Contents Safety Information and Precautions...2 1. Product Information...4 1.1 Nameplate and Designation Rule... 4 1.2 General Specifications... 5 1.3 Environment... 9 2 Wiring... 10 2.1 Typical System
More informationCHAPTER MAINTENANCE AND TROUBLESHOOTING. In This Chapter... Maintenance and Inspection Troubleshooting...6 3
CHAPTER MAINTENANCE AND 6 TROUBLESHOOTING In This Chapter... Maintenance and Inspection.................6 2 Monthly Inspection:..................................6 2 Annual Inspection....................................6
More informationTOSVERT TM VF-nC3 Parameter List
TOSVERT TM VF-nC Parameter List E658664 - Setting information * Please fill it in if necessary. Item Content Item Content Setting date / person Customer Application Application model Motor manufacturer
More informationvacon 10 ac drives quick guide
vacon 10 ac drives quick guide NOTE! You can download the English and French product manuals with applicable safety, warning and caution information from www.vacon.com/downloads. REMARQUE Vous pouvez télécharger
More informationQuick Reference Guide. DF5-... Frequency Inverters 02/02 AWB GB. For Immediate Delivery call KMParts.com at (866)
DF5-... Frequency Inverters 1 st published 22, edition 02/02 Moeller GmbH, 53105 Bonn Author: Holger Friedrich Editor: Michael Kämper Translator: Dominik Kreuzer All brand and product names are trademarks
More informationQuick Reference Guide. DF5-... Frequency Inverters 02/02 AWB GB
DF5-... Frequency Inverters 1 st published 22, edition 02/02 Moeller GmbH, 53105 Bonn Author: Holger Friedrich Editor: Michael Kämper Translator: Dominik Kreuzer All brand and product names are trademarks
More informationvacon 100 ac drives application manual
vacon 100 ac drives application manual vacon 0 INDEX Document: DPD00927D Version release date: 5.5.12 Corresponds to software package FW0072V00.vcx 1. Vacon 100 - Startup... 2 1.1 Startup Wizard... 2
More informationRM-2000-RTDW Remote Monitor User s Guide
RM-2000-RTDW Remote Monitor User s Guide The RM-2000-RTDW motor-monitoring device can be used to monitor and/or control SymCom s Model 777 via an RS-485 Modbus network. Two form C output relays are available
More informationTHYFREC-VT110S 200V 1PH System 0.4 to 2.2kW 400V 3PH System 0.75 to 2.2kW QUICK START GUIDE
MEIDEN AC SPEED CONTROL EQUIPMENT THYFREC-VT110S 200V 1PH System 0.4 to 2.2kW 400V 3PH System 0.75 to 2.2kW QUICK START GUIDE NOTICE 1. Read this manual thoroughly before using the VT110S, and store in
More informationBATCHMATE 1500 Batch Control Computer Technical Bulletin
TS-5(C) BATCHMATE 5 Batch Control Computer Technical Bulletin DESCRIPTION The BATCHMATE features an 8 digit.55-in. alphanumeric LED display. The pulse input model will accept up to 2, pulses per second
More informationConfiguring Drive Parameters
3 In This Chapter... page Choosing a Programming Device... 2 Using Keypad Devices... 3 D Group: Monitoring Functions... 6 F Group: Main Profile Parameters... 8 A Group: Standard Functions... 9 B Group:
More informationSoftstarters. Specification guide. Type PST. Low Voltage Products & Systems
Softstarters Type PST Low Voltage Products & Systems 2 Low Voltage Products & Systems 1SXU132171M0201 [AC 1006.8] - 5/03 ABB Inc. 888-385-1221 www.abb.com/lowvoltage Softstarters Type PST Specification
More informationnx frequency converters shaft synchronization application apfiff11 user's manual
nx frequency converters shaft synchronization application apfiff11 user's manual 2 vacon ABOUT THE SHAFT SYNCHRONIZATION APPLICATION MANUAL Congratulations for choosing the Smooth Control provided by Vacon
More informationAmbient Conditions Storage Conditions Installation Minimum Clearances and Air Flow...2 3
CHAPTER INSTALLATION 2 AND WIRING Contents of this Chapter... Ambient Conditions..............................2 2 Storage Conditions...............................2 2 Installation.....................................2
More informationData Acquisition Modules/ Distributed IO Modules
User Manual Data Acquisition Modules/ Distributed IO Modules Future Design Controls, Inc. 7524 West 98 th Place / P.O. Box 1196 Bridgeview, IL 60455 888.751.5444 - Office: 888.307.8014 - Fax 866.342.5332
More informationAltivar 68 Telemecanique
Altivar 68 Telemecanique Programming manual Variable speed drives for asynchronous motors Contents Installation recommendations 3 Control 7 A - Display of references and actual values and configuration
More informationVSD Series II Variable Speed Micro Drives (VSM II) FS1 FS5
New Information Electric Current! Danger to Life! Only skilled or instructed persons may carry out the following operations. Variable Speed Micro Drives for Machinery Applications () VSxxx0_, VSxxx2x4_,
More informationMA7200 PLUS INVERTER SERIES PID Quick Start Manual For Fan and Pump Applications
MA7200 PLUS INVERTER SERIES PID Quick Start Manual For Fan and Pump Applications 3 to 75 HP Models- MA7200-2003-N1 Thru MA7200-2040-N1 (230V) & MA7200-4003-N1 Thru MA7200-4075-N1 (460V) speed time Rev.
More informationHPVFP High Performance Full Function Vector Frequency Inverter
Advanced User Manual HPVFP High Performance Full Function Vector Frequency Inverter HP VER 1.00 1. HPVFP Parameter Set Overview...3 1.1. About this section...3 1.2. Parameter Structure Overview...3 1.3.
More informationCompact & Powerful Inverter STARVERT ig5a 0.4~1.5kW 1phase 200~230Volts 0.4~22kW 3Phase 200~230Volts 0.4~22kW 3Phase 380~480Volts
Compact & Powerful Inverter STARVERT ig5a 0.4~1.5kW 1phase 200~230Volts 0.4~22kW 3Phase 200~230Volts 0.4~22kW 3Phase 380~480Volts Inverter STARVERT ig5a LS Starvert ig5a is very competitive in its price
More informationHitachi P1 Closed Loop Hoist Basic Instruc on Manual
Hitachi P1 Closed Loop Hoist Basic Instruc on Manual DH Firmware V.18 DETROIT HOIST AND CRANE LLC, CO. 6650 STERLING DRIVE NORTH STERLING HEIGHTS MICHIGAN 48312 Introduction This manual only applies to
More informationMicro Motion Model 2700 Transmitters with Configurable Input/Outputs 2700***B 2700***C. Configuration and Use Manual Supplement
P/N MMI-20015781, Rev. AA September 2009 Micro Motion Model 2700 Transmitters with Configurable Input/Outputs Configuration and Use Manual Supplement 2700***B 2700***C Configuration Operation Maintenance
More informationVF-nC1 Adjustable Speed Drive Engineering Specification
PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba VF-nC1 AC Variable Frequency Drives, 6 pulse for 100V single-phase 0.1 to 0.75kW, 200V single-phase 0.2 to 2.2kW and 200V threephase 0.1
More informationVLT MICRO Series Adjustable Frequency Drive Instruction Manual
VLT MICRO Series Adjustable Frequency Drive Instruction Manual 1/00 23-6127-00 Revision DR 2 Table of Contents Chapter 1 Chapter 2 Chapter 3 Introduction Getting Started... 5 Receiving, Inspection, and
More informationNetBiter I/O Extender 4RO 6RTD 8DIO - DAIO User Manual Revision 1.00
NetBiter I/O Extender 4RO 6RTD 8DIO DAIO User Manual Revision 1.00 IntelliCom Innovation AB Linjegatan 3D SE302 50 Halmstad SWEDEN Phone +46 35 18 21 70 Fax +46 35 18 21 99 email info@intellicom.se www
More informationACS 100 AC Drives for Speed Control of. 1 / 6 to 3 Hp (0.18 to 2.2 kw) AC Induction Motors
Comp-AC User s Manual ACS 100 AC Drives for Speed Control of 1 / 6 to 3 Hp (0.18 to 2.2 kw) AC Induction Motors ACS 100 AC Drives for Speed Control of AC Induction Motors User s Manual ACS100U-US-04 3AUA489002B3919
More informationDesign Specifications Operator Keypad Environmental and Operating Conditions
Series 15J Mini Inverters Big inverter features do come in small packages! Take a look at Baldor s Series 15J Inverter control. Designed to save cabinet space without giving up the features available on
More informationFrequency Converters for Speed Control of 0.55 to 4.0 kw Squirrel Cage Motors Supply Voltage 208 to 240 V 380 to 480 V User s Manual
ACS 200 Frequency Converters for Speed Control of 0.55 to 4.0 kw Squirrel Cage Motors Supply Voltage 208 to 240 V 380 to 480 V User s Manual Keep this User's Manual within easy reach. Warning symbols For
More informationINSTALLATION AND OPERATION MANUAL IODA INPUT/OUTPUT MULTI-FUNCTION BOARD (Part No. 9668)
INSTALLATION AND OPERATION MANUAL IODA INPUT/OUTPUT MULTI-FUNCTION BOARD (Part No. 9668) Use with Models KBDA-24D, 27D, 29, 45, 48 See Safety Warning, on page 4. RoHS The information contained in this
More informationPID Software Kit. Part No. SK-PID1-L503. For GPD 503 Adjustable Frequency Drives CT: 1-30HP, 230V; 1-60HP, 460V VT: 1-40HP, 230V; 1-75HP, 460V
PID Software Kit Part No. SK-PID-L53 For GPD 53 Adjustable Frequency Drives CT: -3HP, 23V; -6HP, 46V VT: -4HP, 23V; -75HP, 46V DESCRIPTION The PID Software Kit consists of two EPROMs and this instruction
More informationDEIF A/S. Description of options. Option H3 Serial communication Profibus DP Multi-line 2 version 2. Description of option. Functional description
Description of options Option H3 Serial communication Profibus DP Multi-line 2 version 2 4189340279I SW 2.42.X Description of option Functional description DEIF A/S Parameter table Data tables DEIF A/S,
More informationDC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification
01 May 20 30-10-10--EN Page 1 of DC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of
More informationBAS Integration Manual
Snow Melting Control 680 Introduction BAS Integration Manual Snow Melting 680_B 10/15 Replaces: 04/15 The Snow Melting Control 680 can communicate with a Building Automation System (BAS) using either BACnet
More informationSafety 3 Introduction 4 About this Manual 4 Assumptions 4 HP/kW Conversion 6
Contents Contents 1 Introduction 3 Safety 3 Introduction 4 About this Manual 4 Assumptions 4 HP/kW Conversion 6 2 VLT Functional Features 7 Drive Operation (03-14) 7 Motor and Drive Thermal Protection
More information