General Specifications
|
|
- Alexander Doyle
- 6 years ago
- Views:
Transcription
1 General Specifications GS J08X0-0E FX Series Computing Units (mv Input/Variable Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter, Peak Holder, Bottom Holder, Analog Memory, Program Setter, Limiter, Linearizer, Temperature Compensator, Pressure Compensator, Adder/Subtractor, Multiplier, Divider, High Selector, Low Selector, Programmable Unit General The JUXTA FX Series, Computing unit (mv Input/ Variable Software Type) receives mv input signals, applies various computing functions to them, and outputs isolated DC current or DC voltage signals to controllers or recorders. The computation parameters, zero points, and spans can be set and modified using a Handy Terminal (JHT00). List of Computing Units Table. List of FX Series Descriptions Moving Average Unit Dead Time Unit Velocity Unit First Order Lug Unit First Order Lead Unit Velocity Limiter Peak Holder (with second input for holding) Bottom Holder (with second input for holding) Analog Memory (with second input for holding) Program Setter Limiter Linearizer Temperature Compensator Pressure Compensatior Adder/Subtractor Multiplier Divider High Selector Low Selector Programmable Unit (with contact input) Models : V or A FX-MA FX-DT FX-VC FX-LG FX-LE FX-VL FX-PH FX-BH FX-AM FX-PS FX-LM FX-FX FX-TR FX-PR FX-AS FX-ML FX-DV FX-HS FX-LS FX-FP Model and Suffix Codes Model (See Table ) A: Current signal V: Voltage signal Function (See Table ) Input : mv signal FX--*B [Model FXA] [Model FXV] A: to 0 ma DC : 0 to 0 mv DC B: to 0 ma DC : 0 to 00 mv DC C: to ma DC : 0 to V DC D: 0 to 0 ma DC : 0 to 0 V DC E: 0 to ma DC : 0 to V DC F: 0 to 0 ma DC : to V DC G: 0 to ma DC : -0 to +0 V DC Z: (Custom order) 0: (Custom order) Current signal Voltage signal See Table See Table Power supply V DC±0% Ordering Information Specify the following when ordering. If the fixed constants for each computing function are specified with the order, the specified values will be assigned before shipment. If not specified, the products are shipped with factory default settings. (Refer to Functions for other items which need to be specified when ordering.) Model and suffix codes: e.g. FXA-MA-A*B Input range: e.g. 0 to 00 mv DC Moving average time: e.g. 0 sec. Yokogawa Electric Corporation -9-, Nakacho, Musashino-shi, Tokyo, Japan Tel.: Fax.: GS J08X0-0E Copyright Mar. 00(YK) nd Edition Aug. 0, 00(YK)
2 Input Specificatons Input signal: Refer to Table Input signals point of mv signal points of mv signals Table. Input Signals Measuring range: Refer to Table Input signal mv signal Model and Suffix codes FX-MA, FX-DT, FX-VC, FX-LG, FX-LE, FX-VL, FX-PS, FX-LM, FX-FX FX-PH, FX-BH, FX-AM, FX-TR, FX-PR, FX-AS, FX-ML, FX-DV, FX-HS, FX-LS, FX-FP Table. Measuring Range Measuring range Each measuring range and span is as follows: -00 to +0 mv: span 0 mv or more -0 to +0 mv: span 0 m V or more -0 to +0 mv: span 0 mv or more - to +0 mv: span mv of more Input resistance: MΩ ( kω or more during power off) Maximum allowable input: -0. to +.0 V DC Input adjustment function: ±% of span (Zero/Span) Specifications signal: DC current signal or DC voltage signal Allowable load resistance: Refer to Table range Table. signals range to 0 ma DC: 0 Ω or less 0 to 0 mv DC: 0 kω or more to 0 ma DC: 00 Ω or less 0 to 00 mv DC: 0 kω or more to ma DC: 000 Ω or less 0 to V DC: kω or more 0 to 0 ma DC: 0 Ω or less 0 to 0 V DC: 0 kω or more 0 to ma DC: 900 Ω or less 0 to V DC: kω or more 0 to 0 ma DC: 00 Ω or less to V DC: kω or more 0 to ma DC: kω or less -0 to +0 V DC: 0 kω or more adjustment function: ±% of span (Zero/Span) Standard Performance Accuracy rating: ±0.% of span Note that the accuracy is not guaranteed for output levels less than 0.% of the span of 0 to X ma output range type. The ranges corresponding to the input span of less than 0mV: 0 (mv) Accuracy= 0. X Input span (mv) (%) FX-ML, FX-DV: ±0.% of span (when K=K=K=, A=A=A=0%) FX-FP: ±0.% of span (when Input; %=; %) Response speed: 00 ms, % response (0 to 90%) Computation cycle: 00 ms Insulation resistance: 00 MΩ or more at 00 V DC between input and output, output and power supply, and input and power supply. Withstand voltage: 00 V AC/min. between (input and output) and power supply. 00 V AC/min. between output and power supply. Environmental Conditions Operating temperature range: 0 to 0 C Operating humidity range: to 90% RH (no condensation) Power supply voltage: V DC±0% Effect of power supply voltage fluctuations: ±0.% or less of span for fluctuation of V DC±0% Effect of ambient temperature change: ±0.% of span or less for a temperature change of 0 C. Current consumption: V DC ma (FXV), 8 ma (FXA) Mounting and Dimensions Material: ABS resin (Case body) Mounting method: Rack, Wall, or DIN rail mounting Connection: M screw terminal External dimensions: x x mm (H x W x D) Weight: Approx.0g Standard Accessories Tag number label: Range label: Mounting block: Mounting screw: M screw x Custom Order Specifications signal: Refer to Table Table. Acceptable range for custom order Current signal Voltage signal range 0 to ma DC -0 to +0 V DC Span to ma DC 0 mv to 0 V DC Zero elevation 0 to 00% -00 to +00% FX-FX: ±0.% of span (when piecewise-linear-gain is or less) FX-TR, FX-PR: ±0.% of span (when K=K=, A=0%, X=00%) FX-AS: ±0.% of span (when K=K=, K=0., A=A=A=0%) All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J08X0-0E Aug. 0,00-00
3 Terminal Assignments FX-MA, -DT, -VC, -LG, -LE, -VL, -LM, -FX Do not use this terminal Input (+) Input (-) (+) (-) Power supply (+) Power supply (-) FX-PS Start/Reset Do not use this terminal Start/Reset (+) (-) Power supply (+) Power supply (-) FX-PH, -BH, -AM, -TR, -PR, -AS, -ML, -DV, -HS, -LS, -FP Input /Hold (+) Input (+) Input, /Hold (-) (+) (-) Power supply (+) Power supply (-) Block Diagrams FX -MA, -DT, -VC, -LG, -LE, -VL, -LM, -FX Handy Terminal (JHT00) or PC-Based Parameter Setting Tool (VJ) Communication interface Microprocessor Insulation circuit Input Low drift input processing circuit Computation Zero adjustment Span adjustment circuit Power supply circuit Power supply FX -PS Handy Terminal (JHT00) or PC-Based Parameter Setting Tool (VJ) Communication interface Microprocessor Insulation circuit Start/Reset Low drift input processing circuit Computation Zero adjustment Span adjustment circuit Power supply circuit Power supply FX -PH, -BH, -AM, -TR, -PR, -AS, -ML, -DV, -HS, -LS, -FP Handy Terminal (JHT00) or PC-Based Parameter Setting Tool (VJ) Input /Hold Input Communication interface Microprocessor Computation Low drift input Zero adjustment processing circuit Span adjustment Insulation circuit circuit Power supply circuit Power supply All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J08X0-0E Aug. 0,00-00
4 External Dimensions -Φ. Mounting hole Unit: mm DIN rail mounting Rack mounting Wall mounting All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J08X0-0E Aug. 0,00-00
5 Functions FX-MA Moving Average Unit This computing unit outputs the average of 0 input data (X) sampled at intervals of one-twentieth of the moving-average time (L). At the next sampling, the unit discards the oldest data and outputs the average of the 0 data, repeating the same operation. The output between samplings is smoothed out by interpolation. X+X+...X0 Moving average (Y) = 0 X 0 X 9 X 8 X X X Computation time X X X X X Time Setting range of moving-average time: 0 to 990 sec. with significant digits. minimum unit is sec. To use a first-order lag filter for input (X), set the first order lag time constant (T). Setting range of time constant: 0.0 to 99.0 sec.; minimum unit is 0. sec. Accuracy of moving average and time constant setting: (±.0% of set value) ±.0 sec. Moving average time: factory default; 0 sec. First order lag time constant: factory default; 0 sec. FX-DT Dead Time Unit This computing unit stores the input values (X) sampled at intervals of one-twentieth of the dead time (L) into 0 buffers and outputs data (Y) by orderly shifting them after the dead time has elapsed. The output between samplings is smoothed by interpolation. Y= e -LS +TS X X: Input, L: Dead time Y:, T: Time constant <Example: 0% 00% step input> Input Setting range of dead time: 0 to 990 sec. with significant digits. minimum unit is sec. To use a first order lag filter for input (X), set the first order lag time constant (T). Setting range of time constant: 0.0 to 99.0 sec.; minimum unit is 0. sec. Accuracy of dead time and time constant setting: (±.0% of set value) ± sec. Dead time: factory default; 0 sec. First order lag time constant: factory default; 0 sec. L FX-VC Velocity Unit This computing unit calculates the input velocity by subtracting the input of the last velocity computation (X L ) from the present input (X). The unit then adds a 0% bias to one-half of the obtained velocity and outputs the result (Y). The output obtained is as follows: When there is no change in input: 0% When the input has increased: 0% or more (00% when X-X L = 00%) When the input has decreased: 0% or less (0% when X-X L = -00%) Y= X-X L + 0% X: Present Input X L: Input of the last velocity computation Y: 00% Input 0% 00% 0% Computation cycle Setting range of velocity computation time: 0 to 990 sec. with significant digits. minimum unit is sec. To use a first-order lag filter for input (X), set the firstorder lag time constant (T). Setting range of time constant: 0.0 to 99.0 sec.; minimum unit is 0. sec. Accuracy of velocity computation and time constant setting: (±.0% of set value) ± sec. Velocity computation time (L): factory default; 0 sec. First order lag time constant (T): factory default; 0 sec. FX-LG First Order Lag Unit This computing unit provides a first order lag computation on input (X) with a time constant (T) and outputs the result (Y). Y= X +TS X: Input, T S : Time constant, Y: <Example: 0% 00% step input> Input 0%.% 0% 00% 00% Setting range of time constant:.0 to 99.0 sec.; minimum unit is 0. sec. Accuracy of time constant setting: (±.0% of set value) ± sec. First order lag time constant: factory default; 0 sec. T All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J08X0-0E Aug. 0,00-00
6 FX-LE First Order Lead Unit This computing unit provides a first order lead computation on input (X) with a time constant (T) and outputs the result (Y). TS Y= (+ ) X +TS X: Input, T S : Time constant, Y: <Example: 0% 0% step input> Input 0% 8.% 0% T 0% 00% 0% Setting range of time constant:.0 to 99.0 sec.; minimum unit is 0. sec. Accuracy of time constant setting: (±.0% of set value) ± sec. First order lead time constant: factory default; 0 sec. FX-VL Velocity Limiter This computing unit limits the input (X) velocity at the ascending velocity limit for a positive change, at the descending velocity limit for a negative change, and outputs the limited value (Y). When the input velocity (slope) is not more than the limit, the unit outputs the input as it is. <Example: 0% 00% 0% step input> Input 0% 0% Ascending velocity limit (%/min.) 00% 00% Descending velocity limit (%/min.) Setting range of velocity limit: 0. to 00.0%/min.; minimum unit is 0. %/min. Setting the limit at 00.0%/min. or above does not limit the input, the unit simply outputs the input as is (Open limit function). Setting accuracy of velocity limit: (±.0% of set value) ± 0.%/min. Ascending velocity limit: factory default; 00%/min. Descending velocity limit: factory default; 00%/min. FX-PH Peak Holder This computing unit outputs the current signal or voltage signal (Y) corresponding to the peak value when receiving hold-command input of more than %. FX-AM Analog Memory This computing unit holds the output signal (Y) at the moment when receiving hold-command input of more than %. FX-PS Program Setter This computing unit starts the program when start/reset input of more than % is accepted, and outputs the isolated current or voltage signal internally generated. The output signal changes with the time lapse corresponding to the time table breakpoints. Setting conditions of time table: 0.0 sec. (t 0 to t 0 ) 98 sec., -0.0% (Y 0 to Y 0 ) 0.0% t 0 < t < t < t < t < t < t < t < t 8 < t 9 < t 0 Time breakpoints: t 0 to t 0 breakpoints: Y 0 to Y 0 Setting resolution: Time; 8 sec., s; 0.% OUT Time Time table: Write and specify all data of t 0 to t 0 and Y 0 to Y 0 on the work sheet below. <Work Sheet> Model and suffix code: t0 t t t t t t t t8 t9 t0 Time (sec.) (%) Y0 Y Y Y Y Y Y Y Y8 Y9 Y0 FX-BH Bottom Holder This computing unit outputs the current signal or voltage signal (Y) corresponding to the bottom value when receiving hold-command input of more than %. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J08X0-0E Aug. 0,00-00
7 FX-LM Limiter This computing unit serves as an ordinary computing unit as long as the input (X) is within the upper and lower limits. When the input exceeds the limit, the unit outputs the signal that corresponds to the limit (Y). Setting range of limit: within 0.0 to 00.0%; minimum unit is 0.% (both upper and lower) However, if the upper limit is set less than the lower limit, the unit outputs the upper limit. OUT IN Upper limit: factory default; 00% Lower limit: factory default; 0% FX-FX Linearizer This computing unit gives an arbitrary relationship between the input (X) and output (Y) signals using an arbitrary piecewise linear function. This piecewise linear function has breakpoints, which each give an input-output relationship as a percentage (%). Breakpoint setting conditions: -0.0% (X 0 to X 0 ) 0.0%, -0.0% (Y 0 to Y 0 ) 0.0% X 0 < X <X < X < X < X < X < X < X 8 < X 9 < X0 Input breakpoints: X 0 to X 0 breakpoints: Y 0 to Y 0 OUT FX-TR Temperature Compensator This computing unit performs temperature compensation to gas flow signals (X) and temperature signals (X) measured by pressure flowmeters (Orifice, Bentury, Flow nozzle, etc.), and outputs the compensated gas flow signal (Y). Computing parameters can be set using Handy Terminals. Formula Y= K X K X+A Y: Compensated flow output (%) X: Uncompensated flow input (%) X: Temperature input (%) K: Gain (no unit) K: Gain (no unit) A: Bias (%) If square root extraction is necessary for uncompensated flow input signal, set store address for the fixed constant (value of C). With square root extraction: C=00.0% Without square root extraction: C=0.0% gain ±.990, bias ±99.0% = ±99.0% minimum unit; gain 0.00, bias 0.%. Gain: factory default; K=K=.000 Bias: factory default; A=0.0% Square root extraction for flow input: factory default; no setting How to obtain the gain (K, K) and bias (A): Uncompensated flow input span K= Compensated flow input span Input Breakpoint data: factory default; Input= Note: When specifying the data, write all data of X0 to X0 and Y0 on Y0 to the work sheet below. <Work Sheet> Model and suffix code: X0 X X X X X X X X8 X9 X0 Input (%) (%) Y0 Y Y Y Y Y Y Y Y8 Y9 Y0 Temperature input span (K) K = Reference temperature (K) A = Max. value (ºC) Min. value(ºc) (of temperature range) = Reference temperature (ºC) +. (ºC) Min. value (K) (of temperature range) Reference temperature (K) X 00 (%) Min. value (ºC) (of temperature range) +. (ºC) = X 00 (%) Reference temperature ( C) +. (ºC) Note: Use Divider in cases where the temperature compensation for gas flow is measured by vortex flowmeter. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J08X0-0E Aug. 0,00-00
8 FX-PR Pressure Compensator This computing unit performs temperature compensation to gas flow signal (X) and pressure signal (X) measured by pressure flowmeters (Orifice, Bentury, Flow nozzle, etc.), and outputs the compensated gas flow signal (Y). Computing parameters can be set using Handy Terminals.. Formula Y= K X K X+A Y: Compensated flow output (%) X: Uncompensated flow input (%) X: Pressure input (%) K: Gain (no unit) K: Gain (no unit) A: Bias (%) If square root extraction is necessary for uncompensated flow input signal (X), set store address for the fixed constant (value of C). With square root extraction: C=00.0% Without square root extraction: C=0.0% gain ±.990, bias ±99.0% = ±99.0% minimum unit; gain 0.00, bias 0.%. Gain: factory default; K=K=.000 Bias: factory default; A=0.0% Square root extraction for flow input: factory default; no setting How to obtain the gain (K, K) and bias (A): FX-ML Multiplier (X, X) from various converters, and outputs the isolated current or voltage signal (Y) after multiplication. The unit can perform pressure compensation by inputting gas flow signals measured by vortex flowmeter etc. and pressure signal as two input signals. Formula: Y=K(K X+A) (K X+A)+A Y: (%) K to K: Gain (no unit) X, X: Input (%) A to A: Bias (%) gain ±.990, bias ±99.0% = ±99.0% Gain: factory default; K=K=K=.000 Bias: factory default; A=A=A=0.0% How to obtain the gain (K, K, K) and bias (A, A, A) for pressure compensation: K= since the output value of flow transmitter is A=0% since the output value of flow transmitter is K= Max. value (kpa) Min. value (kpa) (of pressure transmitter range) Reference pressure (kpa) + 0. (kpa) 8 K= Uncompensated flow input span Compensated flow input span Min. value (kpa) + 0. (kpa) (of pressure transmitter range) A= X 00 (%) Reference pressure (kpa) + 0. (kpa) K= Max. value (kpa) Min. value (kpa) (of pressure transmitter range) Reference pressure (kpa) + 0. (kpa) K= Uncompensated flow input span Compensated flow input span Min. value (kpa) + 0. (kpa) (of pressure transmitter range) A= X 00 (%) Reference pressure (kpa) + 0. (kpa) Note: Use Divider in cases where the temperature compensation for gas flow is measured by vortex flowmeter. A=0% since the compensated flow value is normally Note: Use Pressure compensator in cases where the pressure compensation for gas flow is measured by pressure flowmeter. FX-AS Adder/Subtractor (X, X) from various converters, and outputs the isolated current or voltage signal (Y) after addition and subtraction. Formula: Y=K{K(X+A)+K(X+A)}+A Y: (%) K to K: Gain (no unit) X, X: Input (%) A to A: Bias (%) gain ±.990, bias ±99.0% = ±99.0% Gain: factory default; K=K=K=.000 Bias: factory default; A=A=A=0.0% All Rights Reserved. Copyright 00, Yokogawa Electric Corporation GS J08X0-0E Aug. 0,00-00
9 FX-DV Divider (X, X) from various converters, and outputs the isolated current or voltage signal (Y) after division. The unit can perform temperature compensation by inputting gas flow signal measured by vortex flowmeter etc.and temperatue signal as two input signals. Formula: Y = K (K X+A) +A K X+A FX-FP Programmable Unit (X, X) from various converters, performs various computations and outputs the isolated current or voltage signal as the result. 9 Y: (%) K to K: Gain (no unit) X, X: Input (%) A to A: Bias (%) gain ±.990, bias ±99.0% = ±99.0% Gain: factory default; K=K=K=.000 Bias: factory default; A=A=A=0.0% How to obtain the gain (K, K, K) and bias (A, A, A) for temperature compensation: K= since the output value of flow transmitter is A=0% since the output value of flow transmitter is Temperature input span (K) K= Reference temperature (K) Max. value ( C) Min. value ( C) (of temperature range) = Reference temperature (ºC) +. ( C) A = Min. value (K) (of temperature range) Reference temperature (K) X 00 (%) Min. value (ºC) (of temperature range) +. (ºC) = X 00 (%) Reference temperature ( C) +. (ºC) K= Uncompensated flow input span Compensated flow input span A=0% since the compensated flow value is normally Note: Use Temperature compensator in cases where the temperature compensation for gas flow is measured by pressure flowmeter. FX-HS High Selector (X, X) from various converters, selects the higher one (Y), and outputs a current signal or a voltage signal. FX-LS Low Selector (X, X) from various converters, selects the lower one (Y), and outputs a current signal or a voltage signal. All Rights Reserved. Copyright 00, Yokogawa Electric Corporation Subject to change without notice. GS J08X0-0E Aug. 0,00-00
General Specifications
General Specifications GS J08X0-0E FX Series Computing Units (Variable Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter,
More informationGeneral Specifications
General Specifications GS 77J09X01-01E WX1 Series Computing Units (Variable Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter,
More informationGeneral Specifications
General Specifications GS J08X0-0E FX Series Computing Units (Variable/Fixed Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter,
More informationGeneral Specifications
General Specifications GS J0X02-01E WX2 Series Computing Units (Variable/Fixed Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter,
More informationGeneral Specifications
General Specifications GS J0X-0E Model MXT Universal Computing Unit (-input, Isolated -output Type) General This plug-in type universal computing unit receives DC current or DC voltage signals, applies
More informationGeneral Specifications
General Specifications GS 77J04H0-0E Model MH Isolator (Free Range Type) General The MH is a plug-in type isolator that converts DC current or DC voltage signals into isolated DC current or DC voltage
More informationUser s Manual. Model MXS Universal Computing Unit (1-input, Isolated 2-output Type) MODEL AND SUFFIX CODES
User s Manual Model MXS Universal Computing Unit (1-input, Isolated 2-output Type) IM 77J04X11-01E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 180-8750 Japan Phone: 81-422-52-7179
More informationGeneral Specifications
General Specifications GS 77J0A070E Model VJA7 Distributor (Multifunction) (Isolated Singleoutput and Isolated Dualoutput Types) Overview This plugin type distributor is used in combination with wire type
More informationGeneral Specifications
General Specifications GS J0U0-0E Model MU Universal Temperature Converter (Free Range Type) General The MU is a plug-in type universal temperature converter that converts input signal (thermocouple, RTD
More informationGeneral Specifications
General Specifications GS 77J01Q08-01E Model VJQ8 Pulse to Analog Converter (Multi-function) (Isolated Single-output and Isolated Dual-output Types) General This plug-in type pulse to analog converter
More informationGeneral Specifications
General Specifications Signal Conditioner Cards GS 33K50H80-50E OUTLINE Signal Conditioner Cards, which interface to the process, are installed in Signal Conditioner Nests. [Release 5] The signal conditioner
More informationGeneral Specifications
General Specifications Signal Conditioner Cards OUTLINE Signal Conditioner Cards, which interface to the process, are installed in Signal Conditioner Nests. [Release 6] The signal conditioner cards can
More informationUser s Manual. Model MA5 Distributor (Free Range Type) CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT MODEL AND SUFFIX CODES
User s Manual Model MA5 Distributor (Free Range Type) IM 77J04A05-0E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 80-8750 Japan Phone 8-422-52-779 Facsimile 8-422-52-6793 Please
More informationGeneral Specifications
General I/O Adaptors (for N-IO) GS 33J62F30-01EN [Release 6] GENERAL This General (GS) describes the hardware specifications of I/O adaptors that enable extended functions setting for analog digital I/O
More informationGeneral Specifications
General Specifications GS 05F01D01E MODEL UM351 Digital Indicator with Alarms with Active Color PV Display General Model UM351 Digital Indicator with Alarms is a precision alarm instrument provided with
More informationMODEL: M2XU MODEL: M2XU [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and
More informationGeneral Specifications
General Specifications MODEL UM0 Digital Indicator with Alarms GS 0F0D00E General Model UM0 Digital Indicator with Alarms is a precision alarm instrument with universal input /8DIN. For excellent monitoring
More informationGeneral Specifications
General Specifications Model UM350 Digital Indicator with Alarms GS 05F0D00E General Model UM350 Digital Indicator with Alarms is a precision alarm instrument with universal input. For excellent monitoring
More informationMODEL: M2XPA3. [2] EXCITATION 2: 4 V DC / 20 ma 3: 8 V DC / 20 ma 4: 12 V DC / 20 ma Configurator software is used to change the excitation value.
Super-mini Signal Conditioners Mini-M Series FREQUENCY TRANSMITTER (PC programmable) Functions & Features Converts the output from a pulse-type transducer into a standard process signal PC programmable
More informationGeneral Specifications
General Specifications Model UM330 Digital Indicator with Alarms GS 05F0D00E General Model UM330 Digital Indicator with Alarms is a precision alarm instrument with universal input /8DIN. For excellent
More informationGeneral Specifications
General Specifications GS 0F01D0E Model UM1 Digital Indicator with Alarms with Active Color PV Display General Model UM1 Digital Indicator with Alarms is a precision 1/8 DIN alarm instrument provided with
More informationGeneral Specifications
General Specifications GS 0F01D01E Model UM1 Digital Indicator with Alarms with Active Color PV Display General Model UM1 Digital Indicator with Alarms is a precision alarm instrument provided with universal
More informationUser s Manual. Model MS5 Potentiometer Converter (Free Range Type) MODEL AND SUFFIX CODES CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT
User s Manual Model MS5 Potentiometer Converter (Free Range Type) IM 77J04S05-0E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 80-8750 Japan Phone: +8-422-52-779 Facsimile:
More informationMODEL: 20VS2-02. Hybrid IC Isolation Amplifiers 20 Series
MODEL: 0VS-0 Hybrid IC Isolation Amplifiers 0 Series ISOLATION AMPLIFIER (-port isolation) Functions & Features Being used for printed wiring board installation High-linearity Low power consumption Isolating
More informationGeneral. Specification FA-M3 F3CX04-0N. Temperature Monitoring Module GS 34M6H11-03E. General. Components and Functions. Model and Suffix Codes
General Specification GS 3M6H11-03E F-M3 F3CX0-0N Temperature Monitoring Module General The F3CX0-0N is a temperature monitoring module for the F-M3. - It occupies a single slot ut can monitor four channels
More informationNew Signal Conditioner VJ series
New Signal Conditioner VJ series Yokogawa M&C corporation 1st Edition March 2000 Signal Conditioner Families YTA series* Temperature transmitter VJ series Small Plug-In type Intelligent Communication New
More informationMODEL: M6SXU MODEL: M6SXU [1][2] [3][4]
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection Universal input (mv, V, ma, T/C, RTD and potentiometer)
More informationMODEL: W2TS. Mini-MW Series
Space-saving Dual Output Signal Conditioners Mini-MW Series THERMOCOUPLE TRANSMITTER Functions & Features Accepts direct input from a thermocouple and provides a standard process signal 5-segment linearization
More informationTurbomachinery I/O Modules
General Specifications Turbomachinery I/O Modules GS 33J60F9001EN [Release 6] GENERA This document of General Specification (GS) contains the hardware specifications of the Turbomachinery I/O Modules (FIO).
More informationGC83 Digital Indicators & GC93 Digital Meter Relay
Cat.No. B- GC83 Digital Indicators & GC93 Digital Meter Relay OUTLINE Model GC83 has been designed exclusively for indication. Model GC93 is equipped with a comparator like a relay and is applied to a
More informationGeneral Specifications
General I/O Adaptors (for N-IO) GENERAL This General (GS) covers the hardware specifications of I/O adaptors that allow for setting extended functions of the Analog Digital I/O Module (A2MMM843), such
More informationSHIMADEN DIGITAL INDICATOR
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD24 & KR16A SHIMADEN DIGITAL INDICATOR BASIC FEATURES ohigh Accuracy ±0.1% FS+1 digit o1/1000ºc Resolution Indication Possible (Pt input
More informationGeneral Specifications
General Specifications MODEL UT50L Limit Controller GS 5DD-0E Overview The UT50L is an FM approved limit controller that can be configured either as a high limit or as a low limit controller by a user.
More informationMODEL AT-10 ANALOG TRANSMITTER
MODEL AT-10 ANALOG TRANSMITTER INSTALLATION & OPERATING MANUAL Industrial Weighing Systems 9 Richmond Street Picton, Ontario K0K 2T0 Phone: 613-921-0397 Fax: 613-476-5293 Web: www.iwsystems.ca info@iwsystems.ca
More informationP5201 Universal Programmable Transmitters with Galvanic Isolation
Transmitters - KB0288-2012/09 P5201 Universal Programmable Transmitters with Galvanic Isolation One type of transmitter for all regular resistance and thermocouple sensors. Linearized output signal 4 to
More informationDIGITAL THERMOMETER Digital Thermometer FEATURES INDEX RECORDERS
Digital Thermometer 23 88 350 mm 3 kg (8-5/8 3-/2 3-3/4" 6.6 lbs) The Digital Thermometer has 6 ranges of temperature sensors and measuring functions of DC V and Ω. YOKOGAWA-original A/D converter (feedback
More informationGeneral Specifications
General Specifications Terminal Boards (for IO) GS 33J0H0-01EN GENERAL This document describes the specifications of terminal boards used for IOs of CENTUM VP systems. STANDARD SPECIICATIONS [Release ]
More informationMODEL: JB2. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT ANALOG BACK STATION Functions & Features Enables manual loading providing hold/increase/ decrease signals to a device controlled by PID controller When the PID controller
More informationResistance Temperature Device Conversion Module
No.SS2-2330-0350 (Rev. 1) SystempaK (Digital/Single Case) Resistance Temperature Device Conversion Module Model J-SRP 90/95 Introduction The Resistance Temperature Device (RTD) Conversion Module (J-SRP)
More informationSHIMADEN PROGRAMMABLE CONTROLLER
SHIMADEN PROGRAMMABLE CONTROLLER Shimaden, Temperature and Humidity Control Specialists SERIES FP21 High Accuracy ±0.1% Programmable 9 Patterns and 9 Steps (81 Steps Max.) Auto-Tuning PID RA / DA Selectable
More informationFA-M3 Analog Input Modules. Contents. F3AD04-5R, F3AD08-6R, -5R, -4R High-Resolution Analog Input Module... 3
General Specifications GS 34M06H04E FAM3 Analog Input Modules Contents F3AD045R, F3AD086R, 5R, 4R HighResolution Analog Input Module... 3 F3AD045V, F3AD085V, F3AD084W Analog Input Module... 7 Function
More informationMODEL: M6SXT. POWER INPUT DC Power R: 24 V DC
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection 5.9-mm wide ultra-slim design Low profile
More informationDIGITAL THERMOMETER VIEW RECORDERS Digital Thermometer FEATURES
Digital Thermometer High-Accuracy Reference Junction Compensation: Compensation accuracy (±0.2 C) Input terminals are provided on both front and rear panels, and an input site is switch selectable. The
More informationR24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY
Čapkova 22 678 01 Blansko tel.: +420 516 416942, 419995 fax: +420 516 416963 R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Display module is designed for measuring the resistance, the signal from the
More informationDIGEM f 96 x 48 EK. Applications. Description
3-349-002-03 1/7.98 Front panel dimensions: 96 x 48 mm LED display: red or green, 14 mm high Max. display range: 19 999 to + 32 765 Modular connectors for flexible use Simple adjustments at front panel
More informationBASIC FEATURES C %RH. Shimaden, Temperature and Humidity Control Specialists. CP3701: Thermocouple Temperature Converter
Shimaden, Temperature and Humidity Control Specialists C %RH CP3701: Thermocouple Temperature Converter CP3702: R.T.D. Temperature Converter CP3703: mv DC-DC Converter CP3704: V/mA DC-DC-Converter CP3705:
More informationJRQ2 ENCODER POSITION TRANSMITTER MODEL. Plug-in Signal Conditioners M-UNIT. (field-programmable; built-in excitation)
Plug-in Signal Conditioners M-UNIT ENCODER POSITI TRANSMITTER (field-programmable; built-in excitation) MODEL JRQ MODEL & SUFFIX CODE SELECTI JRQ MODEL SELECTI Open collector Voltage pulse RS- line driver
More informationGeneral Specifications
General Specifications Model UT, UT Temperature Controller GS CE-E GENERAL UT series temperature controllers provide only the functions and size you require for your application. /6 DIN sizes is available.
More informationMODEL: R30US4. Remote I/O R30 Series
Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable
More informationPROGRAMMABLE CONTROLLER
SERIES FP21 High Accuracy ±0.1% Programmable 9 Patterns and 9 Steps (81 Steps Max.) Auto-Tuning PID RA / DA Selectable User-Selectable Inputs (Thermocouple) User-Selectable Ranges Programmable Scaling
More informationGeneral Specifications
General Specifications GS 77M00-0EN Models R-S, R-H, R-T, R-RT, R-LP, R-HP, R-SP, R-SY, R-PS, R-PH, R-PW, R-, R-D6 rrester [Style: S] General This high quality arrester protects electronic instruments
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
More informationRosemount 333 HART Tri-Loop
Product Data Sheet Rosemount 333 Rosemount 333 HART Tri-Loop HART-TO-ANALOG SIGNAL CONVERTER Convert a digital HART signal into three additional analog signals Easy to configure and install Accessory product
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16 & SHIMADEN DIGITAL INDICATORS & NRTL /C approved BASIC FEATURES DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large 2 mm bright
More informationMODEL: M2VF MODEL: M2VF [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series SIGNAL TRANSMITTER (high speed response) Functions & Features Converts DC input from a sensor into a standard process signal Isolation between input and output
More informationC330 / C330X PC-Programmable Universal, 2-wire Transmitter
C330 / C330X PC-Programmable Universal, 2-wire Transmitter The IPAQ C330 transmitter is a universal, isolated, temperature transmitter with additional voltage and resistance input. Its robust design and
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
More informationSEM210 SERIES. Programmable In-head Universal Temperature Transmitter INDEX SECTION CONTENTS PAGE NO.
INDEX SECTION CONTENTS PAGE NO. SEM210 SERIES 1.0 DESCRIPTION 1 2.0 SPECIFICATION 15 3.0 INSTALLATION 67 Programmable Inhead Universal Temperature Transmitter Status Instruments Ltd, Green Lane Business
More informationGeneral Specifications
General Analog I/O Modules (for FIO) GS 33J60F60-01N [Release 6] GNRAL This document describes about hardware specifications of Analog I/O Modules (for FIO) to be installed in the SB bus node units (ANB10S
More informationMODEL: DA3. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT D/A CONVERTER (16-bit resolution) Functions & Features Converts parallel digital signal into a DC output BCD, binary, offset binary, two's complement, reflected binary
More informationGeneral Specifications
General Model I/O Module (for N-IO) GENERAL This General (GS) provides the hardware specifications of I/O module (for N-IO) that can be mounted on the Base Plate for N-IO I/O (S2BN1D, S2BN4D and S2BN5D).
More informationGeneral Specifications
General Specifications GS 12F5A1-E Model FC400G Free Available Chlorine Analyzer (Non-reagent Type) GENERAL Free chlorine contained in tap water from faucets in fresh water distribution is specified to
More informationDIGITAL MULTIMETERS 7561 & & 7562 Digital Multimeters FEATURES RECORDERS INDEX
756 & 7562 756 & 7562 Digital Multimeters 756 (6-/2 digits) 23 88 330 mm 3 kg (8-3/8 3-/2 3" 6.6 lbs) 7562 (6-/2 digits) 23 88 330 mm 3 kg (8-3/8 3-/2 3" 6.6 lbs) The 7560 (6-/2 digit display) Series is
More informationMODEL: M2SES SEN TRONIC AG [3] OUTPUT
Super-mini Signal Conditioners Mini-M Series HIGH/LOW SELECTOR Functions & Features Monitors two DC input signals and transmits an output signal proportional to the higher or lower input CE marking UL
More informationOPTITEMP TT 20 Technical Datasheet
OPTITEMP TT 20 Technical Datasheet Analog PC-programmable two-wire transmitters for Pt100 Efficient PC-configuration without recalibration Very stable output Very fast response time The documentation is
More informationUSB-2404-UI Specifications
Specifications Document Revision 1.1, April, 2011 Copyright 2011, Measurement Computing Corporation All specifications are subject to change without notice. Typical for the range 0 to 60 C unless otherwise
More informationMICRO-CONTROLLER X (48mm 48mm)
PX series Digital temperature Controller DT SHEET Socket Type With front dimensions of 8 8mm, this socket type temperature controller enables OnOff control, PID control or 8step ramp/soak function, using
More informationMODEL: M2DYS SEN TRONIC AG
Super-mini Signal Conditioners Mini-M Series CURRENT LOOP SUPPLY Functions & Features Powers a 20 ma DC current loop Short circuit protection Applicable to smart transmitters CE marking UL approval Typical
More informationGeneral Specifications
General Specifications I/O Modules with Built-in Barrier (for FIO) GS 33K50F80-50E GENERAL This document describes about I/O Modules with Built-in Barrier (for FIO) which can be installed in Zone 2 or
More informationDUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER
OPERATOR S MANUAL DUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER Masibus Automation & Instrumentation Pvt. Ltd. B/30, GIDC Electronics Estate, Sector-25, Gandhinagar-382044, Gujarat, India Web Site: www..com
More informationGeneral Specifications
General Specifications Digital I/O Modules (for ProSafe-RS) GENERAL This GS provides the hardware specifi cations of the digital I/O modules that can be installed in the Safety Node Unit (SNB10D) and Safety
More informationGeneral Specifications
General Specifications I/O Modules with Built-in Barrier (for FIO) GS 33K50F80-50E GENERAL This document describes about I/O Modules with Built-in Barrier (for FIO) which can be installed in Zone 2 or
More informationSR25. SHIMADEN DIGITAL CONTROLLER Shimaden, Temperature and Humidity Control Specialists MICROPROCESSOR-BASED AUOT-TUNING PID CONTROLLER
SHIMADEN DIGITAL CONTROLLER Shimaden, Temperature and Humidity Control Specialists SERIES SR25 MICROPROCESSOR-BASED AUOT-TUNING PID CONTROLLER High Accuracy ±0.1% High Sampling Cycle 0.1 sec. Auto-Tuning
More informationPLUG-IN TRANSDUCER SOFT SPEC. TYPE C SERIES
Common standard specifications High quality/high reliability Highly reliable electronic parts are adopted. Aging test of each part as well as burn-in aging test of the product under a high temperature
More informationMODEL: KS. Plug-in Signal Conditioners K-UNIT
Plug-in Signal Conditioners K-UNIT DC ALARM Functions & Features Providing relay contact closures at preset DC input levels Dual (Hi/Lo) trip Multi-turn screwdriver setpoint adjustments Monitor jacks provided
More informationInstallation and Operating Manual
GB Analog Weight Transmitter PS-1000 Installation and Operating Manual LIST OF CONTENTS Section 1, General information Introduction... 3 Description... 3 Specifications... 4 Wiring connections... 5 Section
More informationModel SPG. Sapphire capacitance diaphragm gauge
No. CP-SS-1881E Model SPG Sapphire capacitance diaphragm gauge Overview The SPG is a capacitance diaphragm vacuum gauge that uses a sapphire capacitance pressure sensor to achieve high accuracy and reliability,
More informationMODEL: W2DYS SEN TRONIC AG. Mini-MW Series
MODEL: WDYS Space-saving Dual Output Signal Conditioners Mini-MW Series CURRENT LOOP SUPPLY Functions & Features Powers a 0 ma DC current loop Short circuit protection Applicable to smart transmitters
More informationDIGITAL MULTIMETERS VIEW RECORDERS & 7562 Digital Multimeters FUNCTIONS FEATURES
756 & 7562 Digital Multimeters 756 (6-/2 digits) 23 88 330 mm 3 kg (8-3/8 3-/2 3" 6.6 lbs) 7562 (6-/2 digits) 23 88 330 mm 3 kg (8-3/8 3-/2 3" 6.6 lbs) The 7560 (6-/2 digit display) Series is a high-accuracy,
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationPM 6669 High-Precision Frequency Counter Specifications
PM 6669 High-Precision Frequency Counter Specifications Product Home Features Specifications Models, Options & Accessories Measuring functions Definitions Input specifications Auxiliary functions TimeBase
More informationEach click of a dial opens a doorway to precision. 2553A. Precision DC Calibrator. Bulletin 2553A-01EN
Each click of a dial opens a doorway to precision. Precision DC Calibrator Bulletin -01EN Yokogawa is a leader in providing high precision measurement equipment electric voltage/current, electric resistance,
More informationJUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationGeneral Specifications
General Specifications Digital I/O Modules GS 34P02Q35-01E GENERAL This GS covers the hardware specifications of digital input/output modules that can be installed in an FCN autonomous controller. For
More informationSimplified Operations for TM-3100 Series Digital Tachometer
Simplified Operations for TM-3100 Series Digital Tachometer The TM-3100 series Digital Tachometers has the most fundamental function in rotational measurement of four standard models (rotation speed display,
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance
1 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1 guide... P.11~ General precautions... P.19 PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global
More informationCEC VIBRATION TRANSMITTER
CEC 1-808 VIBRATION TRANSMITTER Operation & Maintenance Manual 746 Arrow Grand Circle Covina, CA 91722 United States of America Tel: (626) 938-0200 Fax: (626) 938-0202 Internet: http://www.cecvp.com E-mail:
More informationSection 1, General information Introduction... 3 Description... 3 Specifications... 4 Wiring connections... 5
LIST OF CONTENTS Section 1, General information Introduction... 3 Description... 3 Specifications... 4 Wiring connections... 5 Section 2, Calibration Calculations... 7 Calibration Procedure... 8 Section
More informationBipolar Output Working Standard
6166 DC Voltage/Current Source 6½-digit working standard suitable for calibration High-accuracy and highly stable with bipolar output l Wide dynamic range and high resolution Voltage source: ±10nV to ±1200V
More informationIsolated, Linearized Thermocouple Input 5B47 FEATURES APPLICATIONS PRODUCT OVERVIEW
Isolated, Linearized Thermocouple Input 5B47 FEATURES Isolated Thermocouple Input. Amplifies, Protects, Filters, and Isolates Thermocouple Input Works with J, K, T, E, R, S, and B-type thermocouple. Generates
More informationGeneral Specifications
General GS 33K50F60-50 Analog I/O Modules (for FIO) GNRAL This document describes about hardware specifications of Analog I/O Modules (for FIO) to be installed in the SB bus node units (ANB10S and ANB10D),
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67g environment resistance
13 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.139 Sensor selection guide... P.9~ General precautions... P.1 PHOTO PHOTO
More informationModel VJCE-01A VJ Mounting Base for Communication
User s Manual IM 77J01C51-11E Model VJCE-01A VJ Mounting Base for Communication Please read through this manual as well as the manual for respective instruments of JUXTA VJ series mounted on the VJ mounting
More informationMODEL: M1EXT. with Display M1E Series
2 Channel Super-mini Signal Conditioners with Display M1E Series THERMOCOUPLE TRANSMITTER (2 channels, PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized
More informationUNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY. UL File No.: E43149 CSA File No.: LR26550
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY K-RELAYS.0 a UL File No.: E3 CSA File No.: LR2550.0.8 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical
More informationSeries 10-ZSE30A(F)/10-ISE30A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High-Precision Digital Pressure Switch Clean series For positive For vacuum/ compound Rated range ISEA 0.1 to 1 MPa How to Order 10 ISEA 01 N M 01 N01 C4H
More informationFX2N-2AD SPECIAL FUNCTIONBLOCK
FX2N-2AD SPECIAL FUNCTIONBLOCK USER S GUIDE JY992D74701D This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-2AD special
More informationGeneral Specifications
General Specifications YTA70 Temperature Transmitter The YTA70 is the highly accurate temperature transmitter that accepts Thermocouple, RTD, ohms or DC millivolts inputs and converts it to a to 0 ma DC
More informationGeneral Specifications
General Specifications Model SLPC (Style E) Programmable Indicating Controller GENERAL The Model SLPC Programmable Indicating Controller is a microprocessor-based, user-programmable instrument which allows
More informationGeneral Specifications
General Digital I/O Modules (f FIO) [Release 6] GENERAL This GS covers the hardware specifications of the Digital I/O Modules (FIO) that can be installed in the ESB Bus Node Unit (ANB10S, ANB10D), Optical
More information