STATIS and SANAO. Quality and Precision Handpieces
|
|
- Ira Goodwin
- 6 years ago
- Views:
Transcription
1 STATIS and SANAO Quality and Precision Handpieces
2 Quality and Precision 1
3 you can Trust SciCan strives to make your dental procedures easier by providing reliable handpieces with superior design and quality performance. 2
4 AIR-DRIVEN HANDPIECES STATIS Air-driven high-speeds. Designed without compromise. Efficient With maximum 20 watts of power and a strong chuck mechanism (32 Ncm), tooth preparations are performed with the utmost precision. Economical The technologically advanced cage material increases the useful life of the ball bearings resulting in a low cost of ownership. Ergonomically Friendly Comfortable handling for the dentist due to its light weight design that is perfectly balanced when attached to the dental tubing. Easy access because of the small head design. 3
5 STATIS ML, the Dental Advisor Top Air-Driven, High Speed Handpiece award winner since Upon completion of the clinical evaluation in 2011, the STATIS received a 5+ and a 96% clinical rating. Consultants observed,...routine procedures, including crown preparation were performed efficiently without the handpieces slowing or stalling. The STATIS ML is the handpiece of choice for crown preparation, as it produces high torque with four-port water spray. Consultants comments included, I liked the weight, balance, and small head size, and... great all-around handpieces. 4
6 CONNEX Coupling When connected to a CONNEX coupling the STATIS turbines can be swiveled through a full 360º, without tension in your wrist and without dental tubing becoming twisted. The coupler also contains a non-return valve to prevent contaminated water from returning to the dental tubing and unit. 5
7 STATIS ML S10000 STATIS SL S10001 Power (Watts) Spray System 4 1 Noise level (dba) Head height (mm) (with 19 mm bur) Head height (mm) Head diameter (mm) Max. Speed (RPM) 380, ,000 Lighting System Yes Yes Ceramic Ball Bearings Yes Yes Weight (g) Hygiene Protection Anti Suck-Back Anti Suck-Back Warranty 2 years 2 years Connection Light Connex LED S10010 Connex L S10002 Connex GR S pin LED bulb 6 pin Halogen bulb 5 hole Glass rod 6
8 ELECTRICAL ATTACHMENTS SANAO precision handpieces - the perfect balance of engineering and ergonomics. Efficient Its speed results in optimal, consistent power and precision in preparations. Hygiene Protection for Patients and Staff Filled with SciCan s Hygiene Protection System resin to help prevent build up of debris inside the dental handpiece. Ergonomically Friendly The design of the SANAO handpiece was inspired by a group of 35 dentists asked to use clay to create a handpiece that had optimal balance with tubing, control in the hand and great access. 7
9 HPS HYGIENE PROTECTION SYSTEM Filled with SciCan s HPS resin (Hygiene Protection System) to help prevent build up of debris. A dental handpiece is an intricate assembly of finely engineered components built into narrow channels within the handpiece. In a traditional construction, these channels can collect matter and are notoriously difficult to clean effectively. These hard to clean channels within the SANAO line of handpieces are filled with SciCan s HPS resin that closes the door on any material that might otherwise find its way inside. 8
10 Handpiece Max. RPM Common Applications Lowspeed SANAO 40 40,000 Cavity Prep, Finishing SANAO 10 8,000 Endo, Cavity Prep, Finishing SANAO PSO 8,000 SANAO 40ST 40,000 Surface finishing SANAO AM-20 S21002 STATIS AM-20 Motor S21001 Electric 20,000 20,000 SANAO 200L 200,000 SANAO 40L 40,000 Cavity Prep, Finishing Prophy, Polishing, for Snap-on or Screw-in cups or brushes Sterilizable air motor for Sanao low speed and other E-Style handpieces Air motor (with internal water) for Sanao low speed and other E-Style handpieces Removal of decayed matter, cavity and crown preparations SANAO 10L 8,000 Endo, Cavity Prep, Finishing SANAO 40ST 40,000 Surface finishing 9
11 SANAO 200L S20100 SANAO 40L S20101 SANAO 40 S20102 SANAO 10L S20103 Transition Ratio 1:5 1:1 1:1 5:1 Maximum Speed 200,000 40,000 40,000 8,000 Head Diameter (mm) Head height (mm) (with 19 mm bur) Head Height (mm) Weight (g) Noise Level (dba) Spray system Lighting System Glass rod Glass rod - Glass rod Warranty 2 years 2 years 2 years 2 years SANAO 10 S20104 SANAO PSO S20106 SANAO 40ST S20107 Transition Ratio 5:1 5:1 1:1 Maximum Speed 8,000 8,000 40,000 Head Diameter (mm) Head height (mm) (with 19 mm bur) Head Height (mm) Weight (g) Noise Level (dba) Spray system 1-1 Lighting System Warranty 2 years 2 years 2 years 10
12 STATMATIC The ultimate care system for handpieces and their chuck mechanisms. Extends the Life of your Handpieces It properly cleans, lubricates and purges your handpieces to increase their working lifetime. Optimizes Staff Productivity Its automated process optimizes working procedures in your practice, allowing staff to focus on alternative tasks. Time-Saving Up to three handpieces can be cleaned, lubricated, and purged in less than a minute. 10 YEAR WARRANTY 11
13 STATMATIC Spray For use with the Statmatic Maintenance System. Cleans and lubricates your handpiece to ensure long lasting service. STATCARE Spray For manual cleaning and lubrication of your handpieces. STM500-6NA S500-6NA STATMATIC Specifications S30000-NA Dimensions (W x D x H) Weight Electrical Ratings 285 x 190 x 400 mm (11.4x7.6x16 inches) 8.6 kg 18.9 lbs Rated voltage: V Rated frequency: 50/60Hz Rated power: max.30 VA Protection Class 1 Ambient temperatures 5-40 C ( F) Noise Level (dba) 60 (65) Relative Humidity Max. 85% Compressed Air Air Consumption Compressed Air quality 4-6 bar (58-87 psi) 40 NL/min Residual oil content: max. 0,1 mg/m³ Residual dust: max 1µ; max. 1 mg/m³ Residual water: maz. 0.1 g/m³ at -40 C 12
14 E-STATIS AND SLM MOTOR Products in the E-STATIS family come equipped with the advanced E-STATIS SLM motor (short, LED, micromotor) with a motor length of 2.6 and a weight of only 62 grams. Customizable Compatible with e-style attachments and offers a range of customizable settings for all high speed, low speed, and endodontic procedures, all in one system. Efficient With unparalleled power and precision compared to air driven handpieces, procedure time is shorter for increased productivity. 13
15 Versatile The E-STATIS system can convert most traditional dental units into a highly functioning and productive unit with electric handpiece capabilities 14
16 Three year warranty. Fully autoclavable. Brushless technology greatly reduces service requirements. 2.6 inch (66 mm) One of the shortest & lightest torque-controlled dental motors in the world - weighs only 62 grams. Adjustable LED light for unsurpassed visibility. User friendly display menu Customizable operative modes Displays actual bur rotational speed Light on/off Presets of all common handpiece transmissions plus two customizable presets 5 customizable endo settings* Programmable motor torque accommodates all rotary file requirements* * only E-STATIS Advantage 15
17 ADVANTAGE w/ torque control S21200 PREP S21300 Motor speed range: min to min-1 Power supply: 120 W 120 W Motor voltage: Max. 22 V AC Max. 22 V AC Torque: Max. 3.5 Ncm Max. 3 Ncm Operation current of the LED: Max. 250 ma Max. 250 ma Air outlet of coupling (cooling air) NL/min NL/min Spray air pressure: bar / psi bar / psi Spray water pressure: bar / psi bar / psi Weight (motor only) 62g 62g Dimensions control unit: Dimensions motor: 4.33 x 2.99 x 6.89 inch (110 x 76 x 175 mm) 1.25 x 0.87 inch (31.7 x 22 mm) 4.33 x 2.99 x 6.89 inch (110 x 76 x 175 mm) 1.25 x 0.87 inch (31.7 x 22 mm) Rotation: Clockwise / counter clockwise Clockwise / counter clockwise Connection of attachments: ISO 3964 ISO 3964 # of Presets: 3 x prep, 5 x endo 8 x prep 16
18 Manufactured by: SycoTec GmbH & Co. KG Wangener Strasse Leutkirch GERMANY Tel Manufactured for: SciCan Ltd Don Mills Road, Toronto, ON M3B 3P9 Tel: Fax: Toll free: Distributed by: SciCan Ltd Don Mills Road, Toronto, ON M3B 3P9 Tel: Fax: Toll free: Distributed by: SciCan Inc. 701 Technology Dr. Canonsburg, PA USA Tel: Fax: Toll free: Distributed by: SciCan Inc. 701 Technology Dr. Canonsburg, PA USA Tel: Fax: Toll free: SciCan and STATIS are registered trademarks and SANAO, CONNEX, STATMATIC, E-STATIS and Your Infection Control Specialist are trademarks of SciCan Ltd. SD-462 NA EN R4
STATIS and SANAO. Quality and Precision Handpieces
STATIS and SANAO Quality and Precision Handpieces Quality and Precision 1 you can Trust SciCan strives to make your dental procedures easier by providing reliable handpieces with superior design and quality
More informationSTATIS and SANAO. Quality and Precision Handpieces
STATIS and SANAO Quality and Precision Handpieces Quality and Precision 1 you can Trust SciCan strives to make your dental procedures easier by providing reliable handpieces with superior design and quality
More informationKaVo INTRAcompact. KaVo's got the answer.
KaVo INTRAcompact KaVo's got the answer. 2 3 Once a KaVo customer, always a KaVo customer. KaVo technology at its best; feel it. Every INTRAcompact instrument benefits from world renowned KaVo product
More informationKaVo INTRAmatic E. A perfect introduction to the world of KaVo.
KaVo INTRAmatic E A perfect introduction to the world of KaVo. 2 3 The perfect introduction. The "E" in the INTRAmatic E series could stand for a lot of things: Ergonomic, economic, effective, efficient,
More informationolection Handpiece C
Handpiece Collection W&H: the leader in handpiece innovation. For more than 125 years, W&H has been setting the standard with new technology and innovative product development. Today, the exclusive A-dec
More informationHigh Speed Air Turbine Handpiece
OPERATION MANUAL High Speed Air Turbine Handpiece Please read this Operation Manual carefully before use and file for future reference. Handpiece should not be used with friction grip burs exceeding 18.5
More informationRobust. Powerful. Efficient.
Robust. Powerful. Efficient. KaVo EXPERTtorque KaVo EXPERTmatic KaVo EXPERTtorque E680 L KaVo EXPERTtorque Mini E677 L KaVo EXPERTmatic E25 L KaVo EXPERTmatic E20 L KaVo EXPERTmatic E15 L KaVo EXPERTmatic
More informationS TRUMENT AL INS DENT
DENTAL INSTRUMENTS Put your trust in tradition... since 1935 Our history Chronology of turbines production...up to 1991 production of turbines with plastic spindle and with body made from brass, screw
More informationsolid titanium handpieces
Ti-MAX Ti SERIES FROM NSK OPTIC & NON-OPTIC LOW SPEED HANDPIECES SOLID TITANIUM solid titanium handpieces SLIM LINE Smart design Smallest head & Ultra Slim neck Excellent operator dexterity Evolution of
More informationK nk Valve 10 Year Limited Warranty
E L E V A N C E D E L I V E R Y S Y S T E M T E C H N O L O G Y The intuitive user interface is designed to allow you to control all instruments from one easily accessible location. The easy-to-read LED
More informationSynea Vision contra-angle and straight handpieces Dental handpieces with ceramic ball bearings (WK-99 / WK-93) and compact glass rod light
Restoration & Prosthetics Synea Vision turbine handpieces Dental turbines integral ceramic ball bearings and optimum cooling of 5-fold spray with Roto Quick connection with Multiflex connection TK-00 L
More informationREFINED COMFORTABLE DURABLE 2018 / 01. BDC Dental Corporation Ltd.
REFINED COMFORTABLE DURABLE 2018 / 01 BDC Dental Corporation Ltd. BDC Dental Corporation Ltd. BDC is strategically located in Guangzhou with a 120,000 square feet modern manufacturing facility and is devoted
More informationRestoration & Prosthetics
Restoration & Prosthetics High Speed Handpieces LED Couplings Low Speed Handpieces Clinical Micromotors Others PR-D718A Ver.2 12.00.00.0 Ti-Max X Series >>> P. 3-4 LED Couplings >>> P. 13 Ti-Max Z Series
More informationFFERS. July - SEPTEMBER kentexpress.co.uk 3 FOR ONLY 599. BA525 Quick Connect Turbines for most fittings.
0800 028 1181 kentexpress.co.uk July - SEPTEMBER 2018 BA525 Quick Connect Turbines for most fittings 3 FOR ONLY 599 See inside FFERS Expert advice and supreme value for 35 years TRUSTED VALUE THE OPTIMA
More informationE-STATIS 40 System. Operator's Manual. CAUTION: Federal law restricts this device to sale by or on the order of a dentist.
System Operator's Manual CAUTION: Federal law restricts this device to sale by or on the order of a dentist. E-STATIS Operator s Manual Copyright 2009 SciCan. All rights reserved. www.scican.com Doc. No.
More informationDiscover the advantages. High Speed Handpieces, Quick Connectors, Low Speed Handpieces, Maintenance Products and Spare Parts.
Discover the advantages High Speed Handpieces, Quick Connectors, Low Speed Handpieces, Maintenance Products and Spare Parts. 2 3 what sets us apart... Our products are the result of extensive market research
More informationROTARY TOOLS. Spring Health Products, Inc. 705 General Washington Avenue, Suite 701 Norristown, PA HEALTH PRODUCTS
HEALTH PRODUCTS ROTARY TOOLS Spring Health Products, Inc. 705 General Washington Avenue, Suite 701 Norristown, PA 19403 Phone: 610-630-9171 Toll-Free: 1-800-800-1680 Fax: 610-630-9730 www.springhealthproducts.com
More informationPFD drills. Holemaking made easy
PFD drills Holemaking made easy Component Manufacturing Small holes in thin stacks are no problem and can be drilled quickly at high speeds. The tool is compact enough to be fitted virtually anywhere.
More informationOperating Manual. Programmable Electric System. CAUTION: Federal law restricts this device to sale by or on the order of a dentist.
Operating Manual Programmable Electric System CAUTION: Federal law restricts this device to sale by or on the order of a dentist. Table of Contents A1 User Information... 3 A1.1 Symbols Used... 3 A1.2
More informationWorld leader in live tools, angle heads, and multi-spindle drill heads
World leader in live tools, angle heads, and multi-spindle drill heads heimatec GmbH headquarters-germany The Way to Success Heimatec is an international manufacturing company headquartered in Renchen,
More informationMAINTENANCE MAINTENANCE
200 201 Automatically Clean & Lubricates icare sets a new standard for handpiece maintenance systems. In one stylish and compact body, it offers you both ease of use and multiple functions to achieve complete
More informationKaVo POWERtorque LUX 646B PB (Pushbutton) Repair Procedure
KaVo POWERtorque LUX 646B PB (Pushbutton) Repair Procedure Tools needed to properly repair this handpiece: 1. Kavo Coupler 2. Kavo 647B/649B Back Cap Removal Tool (10129) 3. Auto-Chuck Protector Punch
More informationCompact technology for maximum efficiency EMCOMILL 1200 and EMCOMILL 750
[ E[M]CONOMy] means: Compact technology for maximum efficiency EMCOMILL 1200 and EMCOMILL 750 3-axis CNC milling machines for the machining of small to medium lot sizes EMCOMILL 1200 Test UNI ISO 10791-7
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationHandpieces for Laboratories. Handpieces for Laboratories. Air Laboratory Handpieces AIR TURBINE HANDPIECE - BUFFALO AIR TURBINE HANDPIECE - BUFFALO
www.usdentaldepot.com - sales@usdentaldepot.com - 1 1-866-625-5558 - 1-954-874-6325 AIR TURBINE HANDPIECE - BUFFALO AIR TURBINE HANDPIECE - BUFFALO A classic, economical, 350,000 rpm air turbine handpiece
More informationPROPHYMAGIC.COM. King. Prophy. Top Rated Products at the BEST Prices! The. Mystic Angle. KIDDOZ Angles. Magic Air Handpieces.
The King of Prophy PROPHYMAGIC.COM prophy angles Comfort Contra KIDDOZ Angles Magic Air Handpieces Mystic Angle Magic Syringe Tips Freestyle Top Rated Products at the BEST Prices! Directory 4 5 6 7 8 9
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationSurgical Handpiece. Ti-Max Ti-Max Ti-Max Ti-Max X-SG20L X-SG25L X-SG93L X-SG93. S-Max SG M OM-C0425E
Surgical Handpiece Ti-Max Ti-Max Ti-Max Ti-Max X-SG20L X-SG25L X-SG93L X-SG93 S-Max SG20 09.03.01 M OM-C0425E 001 for X-SG20L,SG20 This handpiece is used only for the Surgical Unit with Torque Calibration
More informationTABLE OF CONTENTS TABLE OF CONTENTS...1 INTRODUCTION...2 TECHNICAL DATA...3 POLISHER INSTALLATION...4 SAFETY AND OPERATIONAL INFORMATION...
Rev. 8 March 2005 SUBJECT TABLE OF CONTENTS PAGE TABLE OF CONTENTS...1 INTRODUCTION...2 TECHNICAL DATA...3 POLISHER INSTALLATION...4 SAFETY AND OPERATIONAL INFORMATION...5 POLISHER OPERATION...6 MICROMOTOR
More informationOPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 OSADA, INC.
OPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 NEW Electric BRUSHLESS Laboratory MICROMOTOR Handpiece System SYSTEM FOR ORAL with SURGERY BRUSHLESS AND IMPLANT MICROMOTOR PREPARATIONS OSADA, INC. 30008436
More informationISO Dentistry Handpieces and motors. Médecine bucco-dentaire Pièces à main et moteurs. First edition
INTERNATIONAL STANDARD ISO 14457 First edition 2012-09-15 Dentistry Handpieces and motors Médecine bucco-dentaire Pièces à main et moteurs Reference number ISO 2012 Provläsningsexemplar / Preview COPYRIGHT
More informationISCOVER THE ADVANTA DISCOVER THE ADVANTAGES
ISCOVER THE ADVANTA DISCOVER THE ADVANTAGES High Speed Handpieces Quick Connectors Replacement Cartridges Low Speed Handpieces LEDs & XENON bulbs Prophylaxis Maintenance Products 2 3 The high-quality solution,
More informationFPK 4 FPK 6 FPK 4 FPK 6. Tool Milling Machines. Universal Machine Tools including 3-axis position indicator.
Tool Milling Machines Universal Machine Tools including 3-axis position indicator FPK 4 Travel X-axis 15.7 / 12.2 in (man. / autom.) Table dimensions 12.6 x 29.5 in FPK 6 Travel X-axis 23.6 / 22 in (man.
More informationMAINTENANCE MAINTENANCE
244 245 Automatic System for Cleaning, Disinfecting and Lubricating Rotary Instruments Manual cleaning of instruments does not remove all deposits and residues. Dynamic instruments that are poorly maintained
More informationTable-Top & Arm Units UDS Technical Support: (954)
Ultima 250 Owner s Manual Table-Top & Arm Units UDS Technical Support: (954) 772-9779 Congratulations on the purchase of your new Ultima 250 air dental delivery unit. Our goal at Ultima Dental Systems
More informationSALES CUSTOMER SERVICE TECHNICAL ASSISTANCE CALL TOLL-FREE:
DENTAL, INC. TECHNICAL BULLETIN U802-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationTop spin Nr /
Top spin Nr. 1840 0000 / 1840 1000 Bedienungsanleitung 21-6680 28052014 / A Made in Germany Ideas for dental technology Top spin Nr. 1840 0000 / 1840 1000 Contents 1. Introduction...2 1.1 Symbols...2 2.
More informationPneumatic Drill / / Technical Specification
CS UNITEC Pneumatic Drill 2 2502 0010 / 2 2502 0030 2 2506 0010 / 2 2506 0030 Technical Specification Model with Lever Throttle Model with Twist Throttle with Selfresetting 2 2502 0010 2 2502 0030 2 2506
More informationThat s E[M]CONOMY: Big Performance for small Parts. EMCO MAXXTURN 25. Universal turning center for the complete machining of small, precision parts
[ That s ] E[M]CONOMY: Big Performance for small Parts. EMCO MAXXTURN 25 Universal turning center for the complete machining of small, precision parts EMCO MAXXTURN 25 [Work area] - Spacious - Free chip
More informationMUTO COMFORT DORMOTION XL 150/80 L 80
MUTO COMFORT DORMOTION XL 150/80 L 80 Installation instructions - Wall mount with DORMOTION ( ) TABLE OF CONTENTS Closer overall Overview Intended use Wall requirements and fittings Safety instructions
More informationE.C. HOPKINS LTD PGO4 PEANUT GRINDER OPERATORS MANUAL AND PARTS LIST
E.C. HOPKINS LTD PGO4 PEANUT GRINDER OPERATORS MANUAL AND PARTS LIST E.C. HOPKINS LTD UNIT 1, 82 KETTLES WOOD DRIVE, WOODGATE BUSINESS PARK, WOODGATE VALLEY, BIRMINGHAM B32 3DB TEL NO. +44 (0)121 506 6095
More informationINSTRUCTION MANUAL. 200 Main Street Elmwood WI Phone: Toll Free: Fax:
HIGH SPEED VETERINARY DENTAL UNIT INSTRUCTION MANUAL 200 Main Street Elmwood WI 54740 Phone: 715.639.2081 Toll Free: 1.800.523.8185 Fax: 715.639.9205 Table of Contents Warnings... 3 Unit Diagrams... 4-5
More informationElcometer Muller Laboratory Grinder
English Elcometer 2000 Muller Laboratory Grinder Operating Instructions English is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Copyright Elcometer Limited. 2009. All
More informationRoturn Roturn NEW with Siemens 808 D. Heavy-duty, fast, versatile! CNC Inclined Bed Lathe.
CNC Inclined Bed Lathe Heavy-duty, fast, versatile! Fanuc 0i-Mate TD with Manual Guide 0i control Turning diameter over bed up to 18.9 inch Z axis travel up to 17 inch 6-station tool turret Speed range
More information5-Axis. Technology. Premium. 5 i. uts. End products without undercuts. Disk jig. 6P Glass multi jig. Premill multi jig. 8P Glass multi jig
Disk jig Possible to be equipped with a 98.5mm disk. Special-designed jig that can maintain high precision even after a long-time use due to its stable and durable features. 6P Glass multi jig 5Axis Machining
More informationDrilling & Tapping Wide selection from a single source. Durable designs.
Drilling & Tapping Wide selection from a single source. Durable designs. Type No. of Models Nom. Size (in.) Page Hole Cutting Model HC300 3 Up to 3" 6.2 Model HC450 3 Up to 4 3 4" 6.3 Hole Saws 51 Up to
More informationCompact Hydraulic System for Energy Savings and High Precision. POWER Meister
Compact Hydraulic System for Energy Savings and High Precision POWER Meister POWER Meister Compact Hydraulic System Superior Energy Savings High Precision AC servo motor controls rotational speed and direction
More informationElectron Microscopy Sciences
Electron Microscopy Sciences INSTRUCTIONAL MANUAL CAT. 50120-10 Model 900 Grinding and Polishing Machine P.O. Box 550 s1560 Industry Road s Hatfield PA 19440 1 Introduction The Model 900 is a small, compact
More informationHeadquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
More informationQuolis 5000 Light INSTALLATION AND OPERATION INSTRUCTIONS. Model AL-820 IMPORTANT
Quolis 5000 Light Model AL-80 INSTALLATION AND OPERATION INSTRUCTIONS IMPORTANT After installation is completed, check all the bolts, screws and fasteners to confirm that they are securely fastened. R
More informationMotor spindle Operating Instructions. Ref
Operating Instructions Motor spindle 4015 Ref. 1.001.2437 1.001.2501 RB 06/02 GB 05.00 KaVo Elektrotechnisches Werk GmbH Wangener Straße 78 D-88299 Leutkirch Tel.: 0 75 61 / 86-0 Fax: 0 75 61 / 86-371
More informationDuraTurn Series. CNC Lathe. для получения подробной информации, пожалуйста, напишите нам на почту
DuraTurn 2030 DuraTurn 2050 DuraTurn 2550 CNC Lathe DuraTurn Series Durable Universal Reliable Affordable Accurate CNC Lathe with Excellent Operability and Machining Capability The DuraTurn series, which
More informationHigh Precision Diaphragm Chucks
Precision Workholding Technology High Precision Diaphragm Chucks Unique Diaphragm Chuck Design MicroCentric Improving the quality and efficiency of secondary machining operations.... through high workpiece
More informationSPRINT 1320 /1321. Special Machines. The benchmark for flexibility and high productivity. Y our partner for productivity and precision
SPRINT 1320 /1321 The benchmark for flexibility and high productivity Y our partner for productivity and precision Special Machines SPRINT 1320 /1321 Two series, individual equipment packages SPRINT 1320
More informationROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
More informationHydraulic Swing Beam Shear POWERcut
RAS Reinhardt Maschinenbau GmbH RAS : Much more than just power! A concept for all requirements Do you often find burrs on the cut pieces, because you forgot to adjust the blade clearance properly? Are
More informationSAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL
DENTAL, INC. TECHNICAL BULLETIN G801-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427-0106 SAVE THIS FOR FUTURE REFERENCE www.wellsdental.com
More informationProduct Information. Deburring spindle FDB-AC
Product Information FDB-AC FDB-AC Compliant. Reliable. Flexible. FDB-AC deburring spindle Flexible deburring spindle for use in robotic applications Field of application Standard solution for flexible
More information-dec Lights. LED Halogen
-dec Lights LED Halogen 1 Thoughtful engineering. Intuitive ease. Proven reliability. A-dec gives you lighting solutions designed for the dental environment. LED 6300 300 2 Illuminate See colors at their
More informationOperating Instructions K-POWERgrip EWL Always on the safe site.
Operating Instructions K-POWERgrip EWL 4941. Always on the safe site. KaVo Elektrotechnisches Werk GmbH Wangener Straße 78 D-88299 Leutkirch A 1 User information...2 A 1.1 Meaning of the pictograms...2
More informationMCV-300 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD.
MCV-3 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. MCV-3 CARTRIDGE SPINDLE Well balanced, rigid and easy maintenance, which is built in temperature controlled environment. Spindle, bearings,
More information52 Swing Capacity, 43 Z-Axis Travel
20869 Plummer St. Chatsworth, CA 91311 Toll Free: 888-542-6374 (US only) Phone: 818-349-9166 I Fax: 818-349-7286 www.ganeshmachinery.com GANESH GTW - 5240 CNC Dual-Chuck T - Lathe 52 Swing Capacity, 43
More informationAE-250DS Automatic Wave Soldering Machine User s Manual
AE-250DS Automatic Wave Soldering Machine User s Manual Omxie/SMTmax Corp. www.smtmax.com Copyright 2006 1 P a g e Index of Content 1. Specifications 2. Power Supply 3. Operations 4. Maintenance 5. Warnings
More informationFF3000 FLANGE FACER. Compact, lightweight, and easy to set up. 04 FF3
FF3000 FLANGE FACER 2014 04 FF3 Compact, lightweight, and easy to set up. Compact and Versatile Patented, low profile machine is one of the most compact on the market today. Lightweight, weighing only
More information110FC STRAIGHT LINE EDGER VICTRALUX 110FC MODEL VICTRALUX 110FC
STRAIGHT LINE EDGER VICTRALUX MODEL STRUCTURE AND MACHINE DESCRIPTION The straight line edger is made up of a pair of shoulders of considerable length (200 mm) connected by a base. The beams have been
More informationDentistry Handpieces and motors
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14457 Second edition 2017-10 Dentistry Handpieces and motors Médecine bucco-dentaire Pièces à main et moteurs Reference number ISO 2017 Provläsningsexemplar
More information2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y
RA 9 /6.98 -Way Proportional Logic Cartridge Valve Model FE.. (Series X and X) Size 6... 6... 6 PSI (5 bar)... 75 GPM (8 L/min) RA 9 /6.98 Replaces: 5.9 Characteristics: Single land throttle valve (main
More informationMidwest Products Retail Price List. Effective October 1, 2017
Midwest Products Retail Price List 2018 Effective October 1, 2017 Midwest Products 2018 Retail Price List Pricing Effective October 1, 2018 Contact information for Midwest products: CUSTOMER SERVICE: 800-800-2888
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationShaftGrind S. Key data. Compact and extremely versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Compact and extremely versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees
More informationCompact, lightweight, and easy to set up.
FF4000 FLANGE FACER 2014 04 FF4 Compact, lightweight, and easy to set up. Compact and Versatile Low profile machine is one of the most compact on the market today. Lightweight, weighing only 58 lbs (26.3
More informationEquipment. Grinder & Polisher. Model No. RB 209 MINIPOL-E. Model No. RB 209 MINIPOL. Model No. RB 209 MINIPOL- AP. / Polisher.
Equipment Grinder & Polisher / Polisher. Model No. RB 209 MINIPOL-E Economic type manual polisher RPM Control Knob Variable Speed Control Power On/Off Water valve Bowl hoop and no leaking drain bowl Bowl
More informationTh Series HIGH SPEED MACHINING CENTERS
Th Series HIGH SPEED MACHINING CENTERS HORIZONTAL 5-AXIS & UNIVERSAL MACHIN JUARISTI undergoing a deep development of their boring and milling centers, sets a new milestone with the manufacturing of the
More informationBrandt Automatic Edgebander Optimat Model KDF 670 2C
Brandt Automatic Edgebander Optimat Model KDF 670 2C PC-16 Program Control: - Color matrix LCD screen display - 8mb RAM - Manual push button controls or program control operation Equipped with digital
More informationProduct Data Sheet 622/2HHP-021
The engineer's choice 622/2HHP-021 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationTURNING WITH HIGHEST EFFICENCY. FTC 160 Flexible Turning Center
TURNING WITH HIGHEST EFFICENCY FTC 160 Flexible Turning Center Precision hard turning of hardened gears Ultra rapid machine loader with double gripper FTC 160 Flexible Turning Center The self loading machine
More informationServomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes Servo motors and preloaded ball screws on all axes infinitely
More informationWHERE WE LIVE, QUALITY HAS A LONG TRADITION STREAM FINISHING UNITS SF SERIES. Precision finish demands. Precision finish demands. CF Series.
Precision finish demands Precision finish demands WHERE WE LIVE, QUALITY HAS A LONG TRADITION Founded in 1996, OTEC has quickly established itself as the market s technology leader by developing new machine
More informationCREATE IT. air turbines Air Turbine Series PR-D888E Ver TS
CREATE IT. Air air Turbine turbines Series PR-D888E Ver.1 14.3.02.TS 01 02 POWERFUL Air Turbines Evolve to Become More Powerful An easier to use, consistently powerful handpiece that allows for stress-free
More informationInstruction Manual for Recipro Handpiece Model: Z-6X #
Instruction Manual for Recipro Handpiece Model: Z-6X #510-2160 Introduction Gesswein Power Hand 2X Recipro handpieces are manufactured to the highest standards available to provide many years of trouble-free
More informationNarwhal. Boring, milling and drilling machine
Narwhal Boring, milling and drilling machine NARWHAL NARWHAL 1600 NARWHAL 2000 POWERFUL BORING AND MILLING MACHINE with independent Gundrill bta / STS drilling UNIT GALBIATI GROUP QUALITY, PRECISION, INNOVATION.
More informationgrinding & polishing 39
grinding & polishing sales@trelawny.co.uk 39 grinding & polishing grinding & polishing - an introduction HOW THEY WORK Floor grinders use a horizontal rotating disc to perform a multitude of tasks, commonly
More informationF84S Design Features F85S
F84S Designed for "On Highway" size truck and bus diesel engines, such as Cummins, Detroit, CAT3400, Mercedes, Iveco, Hino, Mitsubishi, John Deere, etc. F85S Designed for Dual Workstations for Production
More informationVersatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY
Versatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY Pistol models and angle models with flat angle head, 90 angle head, worm drive Torque range: from 6
More informationight LED 00 L A-dec 3 1
A-dec 300 Light LED 1 Pure brilliance. The first thing you ll notice about A-dec LED dental lights is the pure, neutral white light. Add our touchpad and all of the light modes and functions are available
More informationTungsten Carbide Burs for Tough Applications
Tungsten Carbide Burs for Tough s TRUST BLUE Design optimized for hand-held applications. Special cut patterns minimize tooth chipping/breakage, splintering and bur head failures. Developed specifically
More informationSCALE AIRE MINI INSTRUCTION MANUAL. Engler High Speed Dental Air Unit
SCALE AIRE MINI INSTRUCTION MANUAL Engler High Speed Dental Air Unit Rev. C 04/29/2015 COMPANY PROFILE Engler Engineering Corporation has been in business since 1964 and occupies an 8000 square foot facility
More information5M1E HIGH SPEED HIGH PERFORMANCE DRILLING & TAPPING CENTER
5M1E003-00 HIGH SPEED HIGH PERFORMANCE DRILLING & TAPPING CENTER 14001 YCM FV50T high speed high performance drilling & tapping center is designed with versatility to meet today s diverse requirements,
More informationMulti talented! "THE NEW GENERATION" SATAjet the versatile spray gun series. SATAjet 1000: Allround paint spray guns for craft and industry
SATAjet 1000 - the versatile spray gun series Multi talented! SATAjet 1000: Allround paint spray guns for craft and industry High speed application Fine atomisation Optimum finish results in all fields
More informationEMCOMAT E-200 MC for the m cycle-controlled m
EMCOMAT E-200 MC for the m cycle-controlled m 1 HEADSTOCK Solid cast-iron construction Powerful Siemens drive system Short taper spindle nose with CAMLOCK adaptor Spindle bore diameter ø 53 (50) mm 2 2
More informationNEW VALID VT-1000 VERTICAL LATHE
NEW VALID VT-1000 VERTICAL LATHE The Valid VT-1000 CNC Vertical Lathe is the result of several years of collaboration between Valid Machinery of the United States and Precursor Tech Co. LTD. of Taiwan.
More informationSeries 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om
Vacuum Pumps & Blowers 4310 Blower A Partnership for Success Commercial duty Battioni Pagani Battioni Pagani Pompe Vacuum pumps & Blowers Vacuum / Pressure Pumps MEC 2000-4000 607 - National Vacuum Equipment
More informationInstruction Manual. Standard Head Assembly Model: Z-STX # for
Instruction Manual for Standard Head Assembly Model: Z-STX #510-2200 Introduction The Gesswein Power Hand 2X Z-STX Head Assembly is engineered and manufactured to a high degree of precision and will give
More informationMETALLOGRAPHY EQUIPMENT
Fully matic Abrasive Cutting Machine - SERVOCUT 602 www.worldoftest.com/fully-automatic-abrasive-cutting-machine-servocut-602 Applications: Fully matic Abrasive Cutting Machine - SERVOCUT 602 is a fully
More informationCamGrind S. Key data. Small and versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Small and versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees high-precision
More informationThe new DuoDoweler DDF 40: Simple. Versatile. Precise.
DuoDoweler DDF 40 The new DuoDoweler DDF 40: Simple. Versatile. Precise. The DuoDoweler DDF 40 introduces greater ease and efficiency to the task of drilling accurate dowel holes. Its hallmarks are a broad
More informationRSM 500 B CNC RSM 500 B CNC. CNC Cylindrical Grinding Machines
CNC Cylindrical Grinding Machines Multi-functional machine design plus highperformance Fagor 8055i FL-TCO ensure maximum precision and efficiency Center height 5 inch Max. grinding diameter 22 inch Workpiece
More informationIncremental encoders 6
Incremental encoders ELECTRONIC GmbH Incremental encoders 6 6.1 Explanatory notes...6-3 6.2 Functional description...6-4 6.3 Applications...6-5 6.4 Assembly examples...6-6 6.5 Alternative designs...6-8
More informationSAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL
DENTAL, INC. TECHNICAL BULLETIN Q827-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE www.wellsdental.com
More information