ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Vs ±5% Vs ±5% Vs ±5%
|
|
- Daniella Hawkins
- 6 years ago
- Views:
Transcription
1 Page 1 of RMS Phase Jitter over 12 khz to 20 MHz bandwidth 31 Standard frequencies from 25 MHz to MHz LPECL and LDS Output types SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION ALUE UNIT Min. Typ. Max. Frequency Range f0 31 standard frequencies, see table MHz Supply oltage s s ±5% s ±5% s ±5% Operating Temperature Ta C C Frequency Stability Δf/f0 Including First Year aging, initial frequency tolerance at 25 C, Frequency stability over temperature range, supply variation, load variation Long Term stability ( Aging ) Δf/Δty Δf/Δty First 25 C C Input oltage High IH Pin 1, E/D or STBY 70%s Input oltage Low IL Pin 1, E/D or STBY 30%s Input Pullup Impedance Zin Pin 1, E/D=High or Low or STBY=High Pin 1, STBY = Low kω MΩ Startup Time T st Measured from the time s reaches its rated minimum value 6 10 ms Resume Time T res Measured from the time STBY pin crosses 50% threshold 6 10 ms Duty Cycle DC %
2 Page 2 of 5 OUTPUT CHARACTERISTICS PARAMETER SYMBOL CONDITION Output termination load 50 OH connected to s 2.0, s ±5% Output Levels Output termination load 50 OL connected to s 2.0, s ±5% ALUE Min Typ. Max UNIT s 1.1 s 0.7 s 1.9 s 1.5 LPECL Output differential voltage swing SWING Current consumption Is Excluding Load termination, s=2.5 or ma E/D current consumption I E/D E/D = Low 35 ma Output Disable Supply leakage I LEAK E/D = Low 1 STBY current I STBY STBY= Low, for all s 100 Maximum Output Current I driver Maximum average current drawn from Out + or Out 30 m Rise / Fall Time Tr / Tf 20% to 80% E/D time RMS Period Jitter RMS Phase Jitter T E/D J P J PH f0=212.5 MHz, for other frequencies T E/D=100 ns + 3 period f0=100 MHz, s= 3.3v or 2.5 f0= MHz, s= 3.3v or 2.5 f0=212.5 MHz, s= 3.3v or 2.5 f0= MHz, integrated bandwidth, 12 KHz to 20 MHz, all s 115 ns LDS PARAMETER SYMBOL CONDITION ALUE Min Typ. Max UNIT Output termination load 100 Output differential voltage OD connected between OUT+ and OUT m, s ±5% Output differential voltage Magnitude change Δ OD 50 m Offset Output oltage OOFF Output termination load 100 connected between OUT+ and OUT , s ±5% Offset Output oltage Magnitude change ΔOOFF 50 m Current consumption Excluding Load termination, Is s=2.5 or ma E/D current consumption I E/D E/D = Low 35 ma Output Disable Supply leakage I LEAK E/D = Low 1 STBY current I STBY STBY= Low, for all s 100 Rise / Fall Time Tr / Tf 20% to 80% E/D time RMS Period Jitter RMS Phase Jitter T E/D J P J PH f0=212.5 MHz, for other frequencies T E/D=100 ns + 3 period f0=100 MHz, s= 3.3v or 2.5 f0= MHz, s= 3.3v or 2.5 f0=212.5 MHz, s= 3.3v or 2.5 f0= MHz, integrated bandwidth, 12 KHz to 20 MHz, all s 115 ns
3 Page 3 of 5 Table 1. List of Supported Frequencies 25 MHz 50 MHz MHz MHz 75 MHz MHz 100 MHz MHz 125 MHz 133 MHz MHz MHz MHz MHz MHz MHz MHz MHz 150 MHz MHz MHz MHz 166 MHz MHz MHz MHz MHz MHz MHz 200 MHz 212.5MHz MECHANICAL DIMENSIONS AND PIN FUNCTIONING Recommended land pattern 7.0± #6 #5 #4 #4 #5 # YXXXX 5.0± #1 #2 #3 #3 #2 # ± PIN SYMBOL FUNCTION 1 E/D STBY 2 GND Electrical Ground 3 NC H or Open: frequency output L: Output is high impedance H or Open: frequency output L: Device goes to sleep mode. Supply current reduces to I STBY No connect, leave it floating or connect to GND for better heat dissipation 4 OUT+ Output Signal 5 OUT Complementary Output signal 6 s Supply oltage Note: Connect a capacitor of 0.1 F or higher value between s and GND
4 Page 4 of 5 ENIRONMENTAL REFLOW PROFILE Soldering MILSTD883F, Method 2003 Moisture Sensitivity Level MSL 1 at 260 C Temperature Cycle JESD22, Method A104 ibration MILSTD883F, Method 2007 Mechanical Shock MILSTD883F, Method 2002 Storage Temperature C REFLOW PROFILE t P TP Rampup Critical Zone T L to T P TL Temp. [ C] TSMAX TSMIN t L Rampdown t S Preheat t[25 C] to Peak Time [sec] Recommended Solder Reflow Profile Temperature Min Preheat T SMIN 150 C Temperature Max Preheat T SMAX 200 C Time (T SMIN to T SMAX) t S sec. Temperature T L 217 C Peak Temperature T P 260 C Rampup rate R UP 3 C/sec max. Rampdown rate R DOWN 6 C/sec max. Time within 5 C of Peak Temperature t P 10 sec. Time t[25 C] to Peak Temperature t[25 C] to Peak 480 sec. Time t L sec.
5 Page 5 of 5 ORDERING INFORMATION SERIES SUPPLY OLTAGE () Frequency Stability TEMP RANGE ( C ) Output Type Enable/ Disable Function OUTPUT FREQUENCY (MHz) CMP702 25: s=2.5 33: s=3.3 XX: s=2.25 to 3.63 A:±10 B:±20 C:±25 D:±50 U: 20~70 : 40~85 1:LPECL 2:LDS E: E/D output S:Standby See table 1 APPROALS Eng. approval, date: SP, 07/19/2016 Created by, date: SP, 07/19/2016 Revision: A
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Any Frequency between Frequency range, accurate to 6 decimal places
Page 1 of 5 Ultra low phase jitter: 0.5ps ( 12kHz to 20MHz ) LCMOS/ LTTL compatible output SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION ALUE UNIT Min. Typ. Max. Frequency
More informationELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. 52 standard frequencies between 3.57MHz and MHz
Frequency Oscillator Page 1 of 6 Low Power Consumption of 3.5 typical at 1.8 52 Standard frequencies between 3.57MHz and 77.760 MHz HCMOS/ LCMOS compatible output SMD package 2.0 x 1.6 mm ELECTRICAL SPECIFICATIONS
More informationELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Supply Voltage Vs Vs=+1.8V±5% is only for CML V
MEMS Differential Page 1 of 8 1 to 220 MHz High Performance LVPECL/ HCSL / LVDS / CML output High frequency stability SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE
More informationELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT
MEMS Oscillator Page 1 of 5 Ultra Low power: < 1 A Fixed 32.768 khz No Supply Voltage external bypass capacitors required XTAL replacement in 2.0 mm x 1.2 mm SMD SMD package 2.0 x 1.2 mm ELECTRICAL SPECIFICATIONS
More informationPARAMETER SYMBOL CONDITIONS VALUE UNIT
Page 1 of 6 FEATURES APPLICATIONS ±0.28 ppm Holdover Stability Mobile Phones ±4.6 ppm accuracy over all conditions Base Stations including 20 years aging Mobile Radios Miniature 5x7 mm SMD GPS Devices
More informationXCO FAST TURNAROUND CLOCK OSCILLATOR HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR FEATURES + DESCRIPTION SELECTOR GUIDE LVCMOS LVDS LVPECL
XCO FAST TURNAROUND DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available
More informationHIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR
DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available in 7.0 x 5.0,
More informationVC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
More informationDescription. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC
CC6 LPECL, LDS Crystal Oscillator Data Sheet CC6 Description ectron s CC6 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt supply, hermetically
More informationVC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
More informationVC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
More informationDescription. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
More informationVX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
More informationCLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO
FEATURES APPLICATIONS 0.125ps typ jitter (150fs MAX f > 200MHz, 25 C) Highest in-class frequency range from 50 to 2100MHz Excellent spurious suppresion 70mA MAX IDD (, any VDD) Lowest in-class power consumption
More informationProgrammable Low-Jitter Precision HCSL Oscillator
Programmable LowJitter Precision HCSL Oscillator General Description The & series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter
More informationDescription. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D
X-700 oltage Controlled Crystal Oscillator Previous ectron Model C-710 X-700 The X-700 is a oltage Controlled Crystal Oscillator that operates at the fundamental frequency of the internal HFF crystal.
More informationVCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator
CC6-Q/R Series 2.5 and 3.3 volt LPECL Crystal Oscillator Features 2.5 or 3.3 LPECL 3 rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz 0.2pS rms jitter, 12kHz-20MHz,155.52MHz
More informationProgrammable Low-Jitter Precision CMOS Oscillator
DSC8121 General Description The DSC8101 & DSC8121 series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide
More informationProgrammable Low-Jitter Precision LVDS Oscillator
General Description The & series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages
More informationVT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
More informationDynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
More informationUltra-miniature, Low Power, kHz MEMS Oscillator
Moisture Sensitivity Level (MSL) 1 ESD Sensitive FEATURES: Smallest 32.768kHz TCXO in the market: 1.54 x 0.84 x 0.6mm Supply oltage: 1.5 to 3.63 Ultra-Low Current Consumption: 1.52µA max.(core current,
More informationVCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
More informationVX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
More informationVVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
More informationVCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator
CC1 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone crystal resulting
More informationCMOS, Ultra-low Jitter Voltage Controlled Crystal Oscillators (VCXOs)
GTJF538 series (5.0x3.2x1.4 mm, 8 pads), a member of Mercury QuikXO quick-turn Voltage Controlled Crystal Oscillators 9VCXOs), features CMOS output and femtosecond (f. sec.) RMS phase jitter (163 f. sec.
More informationLow-Jitter Precision LVDS Oscillator
General Description The DSC0 & series of high performance oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages and temperatures.
More informationLow-Jitter Precision LVPECL Oscillator
DSC0 General Description The DSC0 & series of high performance oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages and temperatures.
More informationVT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
More informationUltra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Ultra-miniature size: Supply oltage: 1.2 to 3.63 (-10 ~ +70); 1.5 to 3.63 (-40 ~ +85) Ultra-Low Current Consumption: 1.4µA max.
More informationUltra-Low Phase Jitter SMD Clock Oscillator
ASMX Moisture Sensitivity Level MSL 3 FEATURES: Excellent integrated phase jitter ±50ppm total frequency stability over -40 C to +85 C temperature range Output Type: LCMOS, LDS, LPECL, HCSL Industry standard
More informationDSC2022. Low-Jitter Configurable Dual LVPECL Oscillator. Features. General Description. Block Diagram. Applications
General Description The DSC2022 series of high performance dual output oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional device
More informationMEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
More informationVC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
More informationVC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description
C-708 LPECL, LDS Crystal Oscillator Data Sheet Ultra Low Phase Noise C-708 Description ectron s C-708 Crystal Oscillator is a quartz stabilized, low phase noise, differential output oscillator which is
More informationVCA1 series 3.3, 5.0 volt CMOS Oscillator
CA1 series 3.3, 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 160 MHz Tristate output for board test and debug 0/70 or 40/85 C operating temperature Product is compliant to RoHS directive
More informationDSC2042. Low-Jitter Configurable HCSL-LVPECL Oscillator. General Description. Features. Block Diagram. Applications
LowJitter Configurable HCSLLVPECL Oscillator General Description The DSC2042 series of high performance dual output oscillators utilize a proven silicon MEMS technology to provide excellent jitter and
More informationPSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROAL CUSTOMER NOMINAL FREQUENCY PRODUCT TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE ERSION 156.250000 MHz TYPE UX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR
More informationVCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1.,.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 15 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
More informationUltra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Factory programmable output frequency: 1Hz to 32.768kHz Available in two types of ultra-miniature packages: 2.0 x 1.2 x 0.6mm (SMD);
More informationLow-Jitter I 2 C/SPI Programmable CMOS Oscillator
Datasheet General Description The DSC2110 and series of programmable, highperformance CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating
More informationVCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
More informationDSC x 1.2 mm Low-Power Ultra-Miniature Oscillator. General Description. Features
1.6 x 1.2 mm General Description The is an ultraminiature, lowprofile complete timing solution in a 1.6 x 1.2 mm footprint. The device is available in frequencies from 1 to 150 MHz with frequency stability
More informationVV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
More informationVCC M CMOS Crystal Oscillator
CC1-1545-49M1520000 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone
More informationParameters Symbol Min. Typ. Max. Unit Condition Frequency Range. Frequency Stability and Aging ppm ppm ppm ppm
Features Frequencies between 115.194001 MHz to 137 MHz accurate to 6 decimal places Operating temperature from -40 C to +125 C. For -55 C option, refer to MO8920 and MO8921 Supply voltage of +1.8V or +2.5V
More informationDS4-XO Series Crystal Oscillators DS4125 DS4776
Rev 2; 6/08 DS4-XO Series Crystal Oscillators General Description The DS4125, DS4150, DS4155, DS4156, DS4160, DS4250, DS4300, DS4311, DS4312, DS4622, and DS4776 ceramic surface-mount crystal oscillators
More informationBlock Diagram. COutput Output XTAL HPLL. Vc OE Gnd. Figure 1 - Block Diagram
X7 Single Frequency HPLL CXO X7 Features Features Description Applications The X7 is a voltage controlled crystal oscillator, CXO, based upon ectron s HPLL high performance phase locked loop frequency
More informationVC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4
C-01 CMOS Crystal Oscillator Previous ectron Model CC4 C-01 ectron s C-01 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-01 uses fundamental or 3rd overtone
More informationPb RoHS. ASG-D Series; LVDS Output STANDARD SPECIFICATIONS: 7.0 x 5.0 x 1.9mm APPLICATIONS: FEATURES:
APPLICATIONS: Networking, SONET/SDH WiMax / WLAN Computing Phase Locked Loo Direct Digital Synthesis (DDS) DSL/ADSL Base Terminal Stations FEATURES: ASG series is a High Performance crystal based oscillator;
More informationVX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
More informationParameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places 100% pin-to-pin drop-in replacement to quartz-based XO Excellent total frequency stability as low as ±20 ppm Operating temperature
More informationDSC2011. Low-Jitter Configurable Dual CMOS Oscillator. General Description. Features. Block Diagram. Applications
General Description The DSC2011 series of high performance dual output CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional
More informationFeatures. o HCSL, LVPECL, or LVDS o HCSL/LVPECL, HCSL/LVDS, LVPECL/LVDS. o Ext. Industrial: -40 to 105 C. o o. o 30% lower than competing devices
DSC55703 General Description The DSC55703 is a crystalless, two output PCI express clock generator meeting Gen1, Gen2, and Gen3 specifications. The clock generator uses proven silicon MEMS technology to
More informationParameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places Operating temperature from -40 C to +85 C. Refer to MO2018 for -40 C to +85 C option and MO2020 for -55 C to +125 C option
More informationClearClock Ultra-Low Jitter & Power Optimized 5.0 x 3.2 mm XO. (3): Stability over OTR. D: ±15ppm over -20 C to +70 C F: ±20ppm over -40 C to +85 C
Features Ultra-Low Jitter: 125 fs Typ RMS (200fs MAX, F>250MHz); spurs included Available with any frequency from 50MHz to 2100MHz Factory programmable; samples available within 1-2 week lead times Lowest
More informationSiT9156 LVPECL, LVDS Oscillator (XO) with 0.3 ps Jitter for 10Gb Ethernet
Features 0.3 ps RMS phase jitter (random) for 10GbE applications Frequency stability as low as ±10 PPM 100% drop-in replacement for quartz and SAW oscillators Configurable positive frequency shift, +25,
More informationKey Electrical Specifications Parameters Minimum Typical Maximum Units Notes ppm
Moisture Sensitivity Level (MSL) 1 FEATURES: Ultra low phase Jitter: 0.2ps max integrated 12 khz to 20 MHz BW ±50ppm total frequency stability over -40 C to +85 C temperature range Output type: LVCMOS,,
More informationSONET / SDH. Block Diagram. COutput Output XTAL HPLL. OE or NC. Figure 1 - Block Diagram
PX7 Single Frequency HPLL XO PX7 Features Features Description Applications The PX7 is a crystal oscillator, XO, based upon ectron s HPLL high performance phase locked loop frequency multiplier ASIC, that
More informationDSC400. Configurable Four Output, Low Jitter Crystal-less Clock Generator. General Description. Block Diagram. Applications.
DSC400 Configurable Four Output, Low Jitter Crystalless Clock Generator General Description The DSC400 is a four output crystalless clock generator. It utilizes Micrel s proven PureSilicon MEMS technology
More informationLOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 115.0 137.0 MHz FEATURES + High Frequency Programmable Low Power Oscillator for Low Cost + Excellent long time reliability + Excellent total frequency stability
More informationS1903 and S1950 Series
Actual Size = 5 x 7mm Product Features 3.3V or 5V ACMOS/TTL compatible logic levels Very tight frequency stability available Fast clock edge rate Pin-compatible with standard 5x7mm packages Designed for
More informationPECL, LVDS, CMOS Output Low Jitter SMD Crystal Oscillator
PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES:
More informationLOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 1.0 110.0 MHZ FEATURES + Low Power Programmable Oscillator for Low Cost + Excellent long time reliability + Frequency range of 1 MHz and 110 MHz accurate to
More informationCARDINAL COMPONENTS, INC. The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz
SERIES CJTA The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz Features 3.3V supply voltage- configurable 10MHz to 250MHz CMOS outputsconfigurable Better than 2Hz tuning resolution Low
More informationVVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
More information1/16. Photocouplers LTV-3120 series 1. DESCRIPTION. Functional Diagram. 1.1 Features. Truth Table. V CC -GND (Turn-ON, +ve going) V O LED
1. DESCRIPTION The LTV-312 optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications and inverters in power supply system. It contains an AlGaAs LED
More informationSiT to 725 MHz Ultra-low Jitter Differential Oscillator
SiT9367 220 to 725 MHz Ultra-low Jitter Differential Oscillator Features Any frequency between 220.000001 MHz and 725 MHz, accurate to 6 decimal places. For HCSL output signaling, maximum frequency is
More informationVT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
More informationLow power, Programmable SMD MEMS Oscillator
Moisture Sensitivity Level (MSL) 1 SD Sensitive AS: APPLICAIONS: GPON, PON Portable devices Consumer electronics Network switches, router, servers thernet, S, SAA, SAS, irewire Harsh environment (vibration,
More informationLOW POWER TCXO & VCTCXO OSCILLATOR
PETERMANN-TECHNIK GmbH LOW POWER TCXO & VCTCXO OSCILLATOR SERIES TCVCTO-2 10.0 40.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based VCTCXO + Ultra Performance Oscillator for
More informationSLM8549. Sillumin Semiconductor Co., Ltd. Motor Driver, Forward/Reverse, Low Saturation Voltage, 28V. May 2017
Motor Driver, Forward/Reverse, Low Saturation Voltage, 28V May 2017 GENERAL DESCRIPTION The is a 2-channel low saturation voltage forward/reverse motor driver IC. It is optimal for motor drive in 12V and
More informationJ-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
More informationLow Power (na Current Consumption) KHz ME831, ME832, ME833, ME834 Series
Features: ME83x is a 32.768 KHz CMOS output TCXO with a maximum frequency stability of ± 5 ppm (± 2.62 minutes / year) over -0 to +85 C, much better time-keeping accuracy than the competition. A proprietary
More informationDSC Q0112. General Description. Features. Applications. Block Diagram. Crystal-less Configurable Clock Generator
Crystalless Configurable Clock Generator General Description The is a four output crystalless clock generator. It utilizes Microchip's proven PureSilicon MEMS technology to provide excellent jitter and
More informationHT-MM900A Military Temperature Oscillator
HT-MM900A Military Temperature Oscillator Features Performance Specifica ons Applications Frequency Range 1 MHz and 137 MHz accurate to 6 decimal places Military Applica ons Low power consump on of 4.5
More informationPhotocoupler LTV-3120 series 2.5 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage, High CMR.
2.5 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage, High CMR. 1. DESCRIPTION The Photocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control
More informationReflow Process Compatible Low Phase Noise Build in PLL-Circuit
Typical Applications Base Stations Features Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Output Frequency range Standard frequencies 10 MHz 700 MHz 10; 25; 26; 39.3216;
More informationFeatures. o HCSL, LVPECL, or LVDS o HCSL/LVPECL, HCSL/LVDS, LVPECL/LVDS. o Ext. Industrial: -40 to 105 C o o. o 30% lower than competing devices
General Description The DSC557-03 is a crystal-less, two output PCI express clock generator meeting Gen1, Gen2, and Gen3 specifications. The clock generator uses proven silicon MEMS technology to provide
More informationPhotocoupler Product Data Sheet LTV-50L series Spec No.: DS Effective Date: 03/22/2016 LITE-ON DCC RELEASE
Product Data Sheet Spec No.: DS7-215-58 Effective Date: 3/22/216 Revision: B LITE-ON DCC RELEASE BNS-OD-FC1/A4 LITE-ON Technology Corp. / Optoelectronics No.9,Chien 1 Road, Chung Ho, New Taipei City 23585,
More informationVS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
More informationGSV3 series 1.8, 2.5, 3.3 volt CMOS Oscillator
GS3 series 1., 2.5, 3.3 volt CMOS Oscillator Features GS3 Crystal Oscillator Quick delivery CMOS output 3.2mm x 2.5mm x 1.2 mm Output frequencies to 200.00 MHz Tristate output for board test and debug
More informationSLM8548. Sillumin Semiconductor Co., Ltd. Motor Driver, Forward/Reverse, Low Saturation Voltage, 28V. October 2016
Motor Driver, Forward/Reverse, Low Saturation Voltage, 28V October 2016 GENERAL DESCRIPTION The is a 2-channel low saturation voltage forward/reverse motor driver IC. It is optimal for motor drive in 12V
More informationULTRA-LOW POWER OSCILLATOR 1-26MHz
ULTRA-LOW POWER OSCILLATOR 1-26MHz SERIES ULPO FEATURES + Ultra Low Power High Precision Oscillator for Low Cost + Excellent long time reliability + Ultra-small 1.5 mm x 0.8 mm package + 1 to 26 MHz with
More informationSiT MHz to 725 MHz Ultra-low Jitter Differential VCXO
SiT3373 220 MHz to 725 MHz Ultra-low Jitter Differential VCXO Features Any frequency between 220.000001 MHz and 725 MHz accurate to 6 decimal places Widest pull range options: ±25, ±50, ±80, ±100, ±150,
More informationPERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATORS ASDMP Series
ASDMP Series FEATURES: Ultra Miniature Pure SiliconTM Clock Oscillator High Performance MEMS Technology by Discera Low Power Consumption for high speed communication Exceptional Stability Over Temp. at
More informationLTV-063L LVTTL/LVCMOS Compatible 3.3V Dual-Channel Optocouplers (10 Mb/s)
LTV-063L LVTTL/LVCMOS Compatible 3.3V Dual-Channel Optocouplers (10 Mb/s) Description The LTV-063L consists of a high efficient AlGaAs Light Emitting Diode and a high speed optical detector. This design
More informationPositive Logic High CMR Intelligent Power Module and Gate Drive Interface Photocoupler
PHOTOCOUPLER Positive Logic High CMR Intelligent Power Module and Gate Drive Interface Photocoupler Description The fast speed photocoupler contains a AlGaAs LED and photo detector with built-in Schmitt
More information1/12. Photocoupler LTV-M456 series. Intelligent Power Module and Gate Drive Interface Optocoupler 1. DESCRIPTION. 1.1 Features. Functional Diagram
Photocoupler Intelligent Power Module and Gate Drive Interface Optocoupler 1. DESCRIPTION The contain a AlGaAs LED optically coupled to an integrated high gain photo detector. Minimized propagation delay
More informationMP23AB01DH. High-performance MEMS audio sensor: fully differential analog bottom-port microphone. Description. Features
High-performance MEMS audio sensor: fully differential analog bottom-port microphone Datasheet - production data Features Single supply voltage operation Fully differential output Omnidirectional sensitivity
More informationPS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
More informationVSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
More informationCMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
More informationModel 653 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 320MHz * +2.5V or +3.3V Operation Output Enable Standard
More informationDSC1001. Low-Power Precision CMOS Oscillator. General Description. Features. Benefits. Block Diagram
DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages
More informationCPPD C 1 L Z A5 B6 XX.XXXX / YY.YYYY CPPD
Field Programmable Crystal Oscillator Programmed in the field with the PG3200 oscillator programming itrument within seconds. Factory Programmable Standard Package Optio Itrument Part Number: CPPD C 1
More informationMEMS Ultra-Low Power Oscillator, khz Quartz XTAL Replacement
33Features: MEMS Technology Small SMD package: 2.0 x 1.2 mm (2012) Fixed 32.768 khz output frequency NanoDrve TM programmable output swing for lowest power Pb-free, RoHS and REACH compliant Typical Applications:
More informationPreliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
More informationUltra Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Ultra Low Phase Jitter Performance, 100fs Typical Fundamental or 3 rd Overtone Crystal Design Frequency Range 80 170MHz * +2.5V or +3.3V Operation Output Enable Standard
More information