GASB 1.0 Flying wing RC fully printed Instruction manual Related to Thingiverse object
|
|
- Amber Lambert
- 6 years ago
- Views:
Transcription
1 GASB 1.0 Flying wing RC fully printed Instruction manual Related to Thingiverse object
2 Hallo, In this document you can find the instruction to assembly the flying wing published on Thingiverse by me. The model flew very well so you can print and fun in very short time. The design was optimized to have less part as possible (just 9 parts to printer) and to be ready to fly in few minutes. This instruction is related to version 06 that is an evolution of the previous where I put in place all suggestions and requests by the user. The RC model works very well and is one of the first pure flying wing RC printed present today on the web (summer 2017). In the Thingiverse page you can find several videos that show some phases of the fly. Please reproduce and fly, and at the end let me know your comments and suggestions. Will be very appreciated remix (with modification and changes) and make on Thingiverse page with pictures with your models. Enjoy the flight Carletto73 Ciao, In questo documento sono riportare le istruzioni per l assemblaggio del tuttala pubblicato da me su Thingiverse. Il modello vola molto bene quindi lo potete stampare e fare volare in poco tempo. Il progetto è stato ottimizzato per avere meno pezzi possibile (sono 9 pezzi da stampare) e per essere pronti a volare in soli pochi minuti. Le istruzioni si riferiscono alla revisione 6 che è una evoluzione della precedente dove ho inserito tutti i suggerimenti e le richieste che mi sono giunte dagli utenti. L aeromodello funziona molto bene ed è uno dei primi modelli tuttala stampati alla 3D oggi presenti sul web (estate 2017). Su Thingiverse potrete vedere diversi video che mostrano alcune fasi di volo. Vi invito a stamparlo ed a volarci e aspetto i vostri commenti e suggerimenti. Saranno molto apprezzati remix (con modifiche) e make sulla pagina di Thingiverse con le foto dei vostri modelli. Buon volo Carletto73 Main characteristics Wingspan: 80 cm (31,5 inch) Print material: PLA Number of parts to print: 9 Weight of print material: 360g Weight in fly order: 462g (*) Estimated cost: 43 (50$ current rate) all included (*) (*) with suggested equipment
3 Bill of material Item Q.ty Description Weight Picture PLA parts Left external wing Right external wing Left internal wing 360g (42,6g) (42,6g) (51,2g) 1 9 Right internal wing (51,2g) Left aileron (13,1g) Right Aileron Front of the central body Rear of the central boby Canopy (13,1g) (55,4g) (76,2g) (16,3g) 2 1 Motor DYS BE KV 18g 3 1 Propeller 5 x 3 5g 4 1 ESC Flyfun 12AE (12A with BEC) 10g 5 2 Servos Analogical XT-55 type MG 24g 6 1 RX module Flysky FS-GR3E (or compliance with your TX) 6,8g 7 1 Battery Lipo 3S 1300mA 120g
4 8 6 Steel rods 4x 1mm x 20mm for ailerons 2x 1mm x 150mm for servos 3g 9 2 Ailerons/dors connection Compliance for 1mm rods 2g 10 2 Magnets Cylindrical 1x5mm 2g 11 - Consumables Cyanoacrylate glue (to glue PLA parts) By-adhesive tape (to fix the servos and devices) -
5 Printing of the parts The parts off the wings are designed as a shell of 0,4mm. The parts of body and the canopy are designed as solid. This means that for the wings is possible to print with thickness of 0,4mm (the same line of extrusion (only one perimeter) is in contact with the external and internal of the parts), or thickness of (will be made two perimeters with one line of extrusion in contact with the internal and on other line of extrusion in contact with the internal). For the wings I suggest to use CuraEngine with thickness (two perimeters). Coat thickness 0,4mm Will be done by the slicer with only one perimeter. Some time with some slicer may occur imperfection on the shell Coat thickness Will be done by the slicer with two perimeters. The material is the same but my feeling is that is more robust Dimension of the parts The flying wing was designed to fit into a standard 3D home printer with working area of 190x190x160mm. Positioning of the part in the bed of the printer The height of every part is less of 160mm instead the horizontal dimensions could be bigger than 190mm, for this reason you have to place the piece into the bed with 45% angulation. Other, the slicer put the infill grid in a fixed point of the bed not depending by the design of the part to printer. When you slice a part, with infill (like canopy, or body parts), before print, you have to check where the infill grid is located into the part and adjust the part position into the bed of the printer in order to have the most efficient positioning of the infill. Below you can check where I suggest to put the infill in every part. Shell/perimeter The parts have to be less weight as possible. For this reason, all parts must be printed with 0,4mm thickness. My printer has a nozzle of 0,35mm diameter. I saw that the slicer is able to build perimeter less or more bigger than the nozzle diameter. For the parts without infill (wings and ailerons) instead of one perimeter pf 0,4mm it is also possible print with two perimeters of the weight is the same but the parts are more robust (chose what you prefer). For the other parts that are developed as solids (body and canopy) instead is possible to print with shell more thick but the plane will be too weight. Left/right part In order to have a symmetrical assembly the STL available are only for left wing. To print the right parts, you have to use the mirror function in your slicer
6 Positioning Infill positioning External wing (2 perimeters) or 0% 8h mm 42,6g No infill Internal wing (2 perimeters) or 0% 10h mm 51,2g No infill Aileron (2 perimeters) or 0% 2h mm 13,1g No infill Front Infill overlap: 5% 15% 5h mm 55,4g Rear Infill overlap: 5% 15% 7h mm 76,2g Canopy Infill overlap: 5% 15% 1h mm 16,3g
7 Assembly Aileron fixing The ailerons are fixed with steel rods and are blocked in between the two part of every semi-wing. Before to glue the two pieces of wing, and fix in the meantime the aileron put the steel rod and check the aileron movement. Glue Remove the support from aileron need for a good printing The best results I ve achieved using cyanoacrylate medium. Maybe the best could be the episodic by-component but, for my experience I noted that in case of very strong crash the parts soldered with cyanoacrylate was dismount and, directly in the field is possible to fix again the parts with new CA glue.
8 Servo/aileron connection The servos are integrated into the wings. For this is needed a 9g servo. I buy this kind of servo on Aliexpress. Positioner the servo in the central of the run and fix the arm. The cables go directly to the vane into the wing. Before fix the servo pass the cable. Use bi-adhesive tape to fix the servo to the wing. Be sure that the cable arrive to the receiver. In the filed I ve put also a tape over the servo to fix better it. Wiring Put the battery, the ESC an the receiver more forward possible to respect the CG CG Under the wings there is highlighted the correct position of the CG
9 Final result Please, Visit to see how works this RC model please visit also Let me know your experiences and your suggestions. Will be very appreciated pictures with your model, remix and made action on my Thingiverse page. Have a nice flight Ciao Carlo
Kodo build guide 1.4
Kodo build guide 1.4 Please do not share files that you bought Development of a new plane and support of the old ones is very time consuming. Only with your help I can focus fully on this project and spend
More information25mm EPP SU31. Instruction Manual. Specifications
25mm EPP SU31 Instruction Manual Specifications Wingspan: 39.4in (1000mm) Length: 42in (1070mm) Wing Area: 448sq in (28.9sq dm) Flying Weight: Approx. 1.5lb (650-710g) Dear Customer, www.valuehobby.com/su31-epp.html
More information28in Super EVA Foam. F-22 Raptor Kit. Specifications. Wingspan: 27.5in (700mm) Length: 38.3in (975mm) Flying Weight: Approx. 1.
28in Super EVA Foam F-22 Raptor Kit Specifications Wingspan: 27.5in (700mm) Length: 38.3in (975mm) Flying Weight: Approx. 1.2lbs (530g) Dear Customer, Congratulations on your purchase of 28in F22 Raptor
More informationŸ Battery Strap Ÿ Paper Knife Ÿ Elevon Throw Gauge Ÿ Instructional Manual. Building Tools:
Congratulations on your purchase of the TuffBirds Spec Racer Flying Wing. We Hope these build instructions will help you complete the build easily. Though the build itself doesn't take much time, just
More informationInstructions - Stobel V2
Instructions - Stobel V2 Congratulations on the purchase of your Stobel, a high end DLG-competition model from LE-composites. We hope you will be happy and successful. To ensure the optimum build we ask
More information43in EPP Acrocub Instruction Manual
43in EPP Acrocub Instruction Manual Specifications Wingspan: 43.3in (1100mm) Length: 41.3in (1050mm) Flying Weight: Approx. 1.5lb (670g) Dear Customer, Congratulations on your purchase of 43in EPP Acrocub
More informationHIGH-END TECHNOLOGY. Electric ducted fan Starfighter
HIGH-END TECHNOLOGY RC Electric ducted fan Starfighter First we want to thank and congratulate you with your decision in buying one of our Kits. The Starfighter puts together very easily so there is not
More informationVT-ALLROUNDER V4 1500MM CORO 3/4 Channel Trainer Airplane
Congratulations on your purchase of the VT- AllRounder 1500MM Trainer Airplane Kit.. Hope these build instructions help you complete the build. Though the build itself doesn't take much time, just be sure
More informationEPP EAGLE THE RC RAPTOR
EPP EAGLE THE RC RAPTOR Installation Manual FLYEAGLE2007@GMAIL.COM TM Step 1: Verify that all the EPP Eagle pieces are included in the Kit. Before we start. Step 2: Identify the pieces need to assemble
More informationEPP Rebel Z 35. White Red w/ Blue Orange w/ Blue Orange w/burgundy Other. Specs. Color - Bottom White Black Checkers Silver Checkers Other Checkers
EPP Rebel Z 35 Specs AUW ~10.0oz Width 35.28 Length 34.67 Wing Area 1.44 sqft Horz Area 2.35 sqft Vert Area.91 sqft
More informationQuesti schemi elettrici esistono grazie alla generosità di Clara Rockmore.
Il Theremin di Clara Rockmore note tecniche. Questi schemi elettrici esistono grazie alla generosità di Clara Rockmore. Questo testo riporta gli appunti di Bob Moog durante la revisione del Theremin custom
More informationSebArt professional line
SebArt professional line Wind S 110 ARF ASSEMBLY MANUAL The new Wind S 110 ARF was designed by Italy aerobatic pilot, Sebastiano Silvestri. This professional ARTF kit is the result of Sebastiano s 20 years
More informationSbach 1,2m 3D/aerobatic EPP model Building instructions
Sbach 1,2m 3D/aerobatic EPP model Building instructions Please refer to the Diagram sheet Diagrams A, B Press 2 carbon strips (1x3x1000 mm) into the grooves in the sides of the fuselage central part (the
More informationPanavia TORNADO F 3. Electric fan powered model. Producer: Jiri Bacinsky
Panavia TORNADO F 3 Electric fan powered model Producer: Jiri Bacinsky Panavia TORNADO F3 is model for experienced modellers. It requires fast reactions and slow heart rate. Model is powered by ducted
More informationHigh performance 90mm fiberglass jet
High performance 90mm fiberglass jet Assembly manual For intermediate and advanced fliers only! Specs Wingspan: 1255mm Fuselage length: 1250mm Flying weight: 2600-3000g Wing area: 22.6 dm² Wing loading:
More informationHIGH-END TECHNOLOGY. Electric ducted fan rafale
HIGH-END TECHNOLOGY RC Electric ducted fan rafale First we want to thank and congratulate you with your decision in buying one of our Kits. The Rafale puts together very easily so there is not much explanation
More informationCorvus Racer CC
Corvus Racer 540 35CC Item No:L-G035008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio mm mm 1200sq in (77.4sqdm) 9.9-12lbs(4.5-5.5kg) 91-1.20(2C) 1.10-1.40(4C) 20-40cc
More informationBUILDING INSTRUCTION F5J Electro-thermic-glider TASER. Taser Building instruction November
Wingspan [mm]: 2000 Takeoff weight [g]: 450-580 Airfoil: AG 455ct-02f AG47ct-02f by Mark Drela BUILDING INSTRUCTION F5J Electro-thermic-glider TASER www.pcm.at 1 CONTENTS DATA 1. Kit contents 2. What else
More informationORIGAMI E2. An electric powered model made from sheet foam based on the configuration of a paper glider. Concept and general arrangement by
ORIGAMI E2 An electric powered model made from sheet foam based on the configuration of a paper glider. Concept and general arrangement by Jack Pignolo Plan by Paul Bradley February 2010 ORIGAMI E2 38
More informationStingray. A micro RC Pusher Jet for 12 mm direct drive motors.
Stingray A micro RC Pusher Jet for 12 mm direct drive motors. Designed by: Ethan, Aaron, and David Payne BlueSkyRC.com Laser Cut by: JTECH Laser (http://jtechlaser.com/) General Information Though this
More informationCorvus Racer Colour schemes. AeroPlus RC Copyright 2013 All Rights Reserved
Corvus Racer 540 59 Item No:A E050003 Specifications WING SPAN: 59"(1500mm) LENGTH: 54.1"(1374mm) WING AREA: 654sq.in.(42.2sq.dm.) FLYING WEIGHT: 4.6 5.3lbs(2000 2300g) Electric:Brushless outrunner 8Oz.
More informationCombat Foamie. An electric powered model made from sheet foam for full contact combat matches. Designed by. Plan by Paul Bradley. Jerry W.
Combat Foamie An electric powered model made from sheet foam for full contact combat matches Designed by Jerry W. Hagood Plan by Paul Bradley July 2010 Combat Foamie Top View 22.9 CG is 7.3 back from nose
More informationParts Identification
We are excited to introduce the Model Aero Aqua Sport. This is an excellent sport flyer, equally at home flying from grass fields, water, or even snow! The unique V-tail gives the Aqua Sport a distinctive
More informationINCLUDED IN THIS KIT: SPECIFICATION: NEEDED BUILDING TOOLS: REQUIRED EQUIPMENT:
Please review this entire manual before beginning assembly. By doing so it will help you better understand each step as you progress in the actual building of your kit, and you will do a better job in
More informationZ II Basic Build Instructions
Z II Basic Build Instructions Kit Contents: (2) Precision EPOR molded wing panels (2) Custom balsa pieces (trailing edge) (6) Fiber glass reinforcement spars (1) CNC T-6 aluminum motor plate Corrugated
More informationEdge 540 V3 35CC. Scheme A. Item No:L G Specifications. Flying Weight
Edge 540 V3 35CC Item No:L G035016 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio Description 76 (1930mm) 74 (1879mm) 1200sq in(77.4sqdm) 9.9 12lbs(4.5 5.5kg) 91 1.20(2C)
More informationBUILDING INSTRUCTION F5J Electro-thermic-glider TASER. Taser Building instruction November
Wingspan [mm]: 2000 Takeoff weight [g]: 480 Airfoil: AG 455ct-02f AG47ct-02f by Mark Drela BUILDING INSTRUCTION F5J Electro-thermic-glider TASER www.pcm.at 1 CONTENTS DATA 1. Kit contents 2. What else
More informationCirrus. Special Features: RC function: Dear friends, Thank you for purchasing our F5J competition high performance electric-powered glider Cirrus.
1 Cirrus Dear friends, Thank you for purchasing our F5J competition high performance electric-powered glider Cirrus. Cirrus is made from slected special light balsa wood. Special Features: Carbon fuselage
More informationPrint scale 5 inches
www.mikeysrc.com FPV V3 Slow flying, stable plane for FPV. PDF NOTES and TIPS **PRINT ONLY THIS PAGE FIRST** to check that the printed scale is correct. The black line below should be five inches long.
More informationA Piaggio-inspired park flyer
Clark Salisbury's SkyTwin A Piaggio-inspired park flyer B efore I discuss building the SkyTwin, I should explain my reasons for designing, building, and flying such an aircraft. I have always been fascinated
More informationPURE PLEASURE for YOU
1 GRAPHITE 2. Assembling gide PURE PLEASURE for YOU Technical support: VLADIMIR'S Model http://airplane-model.com e-mail: order@airplane-model.com Technical data: Wing span: 3100 mm Wing area: 64.5 dm
More informationMaking the Easy 35. A Complete Guide
Making the Easy 35 A Complete Guide Design Clint O Connor, creator of the 2013 Pinhole Printed Kickstarter project, is back again with a new 3D printed pinhole camera that anyone with access to a 3D printer
More informationMXS R 30CC. Item No:L G Specifications. 67 1/2"(1720mm) (2C) (4C) 26 35cc gas DLE 30/35RA MLD35 JC30Evo.
MXS R 30CC Item No:L G030008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio Description Covering Material Carbon Fibre : 75"(1915mm) 67 1/2"(1720mm) 1023sq in(66sq
More informationL 410 UVP-E Turbolet. Recommended equipment and guide for the building of RC model aircraft.
L 410 UVP-E Turbolet Recommended equipment and guide for the building of RC model aircraft. - 1 - History of L-410 It has been 45 years since the first small commercial L-410 prototype took off. The first
More informationSuper Sky Surfer 2000 Assembly Instructions
Super Sky Surfer 2000 Assembly Instructions Note: Plug and Play version of the Sky Surfer comes with fuselage pre-glued and motor/servos installed. If you wish to route antennas or wires through the tail,
More informationINCLUDED IN THIS KIT: SPECIFICATION: NEEDED BUILDING TOOLS: REQUIRED EQUIPMENT:
Please review this entire manual before beginning assembly. By doing so it will help you better understand each step as you progress in the actual building of your kit, and you will do a better job in
More informationNASTY Build Guide. Supplies needed
NASTY Build Guide Supplies needed Blucore or Depron Foam. Blucore (Fan Fold Foam) is available at Lowes. Approximately $25 for 50 feet of Blucore. Depron can be ordered on the internet for slightly more.
More informationI hope you enjoy the Spirit as much as I have. Scott DeTray Model Aero
We are excited to introduce the Model Aero Spirit. Inspired by the magnificent Northrop Grumman B-2 Spirit Stealth Bomber, the Spirit is a great flyer, on land or water. It tracks like an arrow and is
More informationBuildings Space City from Fireball XL5 December 2018 By Gary Reighn
Buildings Space City from Fireball XL5 December 2018 By Gary Reighn General 3D Printing and Assembly Instructions Introduction: The models described below are 3D renderings of the rotating control tower
More informationSirius instruction manual
Sirius instruction manual Thank you for purchasing the eagle wing plane.the sirius is designed for First-Person-Vision (FPV) application spec ifically. Due to the high wingand push prop design, the on-board
More informationJTM 90mm EDF Viper Jet Installation Manual
JTM 90mm EDF Viper Jet Installation Manual Provided by ERJets www.erjets.com 1 Disclaimer: Welcome onboard! This radio controlled jet is not a toy. It has the capability of flying in high speed and therefore
More informationZAGI-3C. Features a 3 Carbon Fiber Spar Matrix. New 2000 upgrade... Lighter Thinner Stronger Faster!
New 2000 upgrade... Lighter Thinner Stronger Faster! ZAGI-3C Features a 3 Carbon Fiber Spar Matrix Wing span 48 Wing area 3.33 sq. ft. Airfoil ZAGI 2000 Weight 17-19 oz. Speed range 6 to 45+ mph Radio
More informationINS TRUC T I ON M A NU A L
INS TRUC T I ON M A NU A L Packing list: 1: PP F6F fuselage *1 2: Carbon tube 5*5*940mm *1 3: Pull rod *4 4: Motor mount *1 5: Quick rod adjuster *4 6: Hinge *4 7: M3 screws *4 8: Hook and loop tape *1
More informationINSTRUCTIONS. 3DR Plane CONTENTS. Thank you for purchasing a 3DR Plane!
DR Plane INSTRUCTIONS Thank you for purchasing a DR Plane! CONTENTS 1 1 Fuselage Right wing Left wing Horizontal stabilizer Vertical stabilizer Carbon fiber bar 1 1 1 7 8 10 11 1 Audio/video (AV) cable
More informationF-16 Falcon 70mm EDF
F-16 Falcon 70mm EDF Instruction manual Specifications: Winspan: 640 mm Length: 990 mm Weight: 900-1100 gram Ducted fans 70mm x 1 Required tools and components:. 4 ch. Computer Radio system w/ 2 servos.
More informationAviator Trainer40 ARF Instruction Manual Specifications
Aviator Trainer40 ARF Instruction Manual Specifications Wingspan: 65.0 in (1650 mm) Length: 53.1 in (1350 mm) Wing Area: 729sq in (47.0 sq dm) Flying Weight: 5.3 lbs (2400g) Dear Customer, Congratulations
More informationBed must be leveled and printer adjusted to produce good single layer prints. Measurement and calibration of your filament is highly recommended.
Printing Instructions: ABS or PET is preferred for durability. Bed must be leveled and printer adjusted to produce good single layer prints. Measurement and calibration of your filament is highly recommended.
More informationBUILDING INSTRUCTION Allround fun glider PINO electric version. PINO E - Building Instruction September
Wing span [mm]: 2500 Wing area [dm2]: 44 Aspect ratio: 14 Take-off weight [g]: from 1400-2100g Wing loading: Airfoil: 32-48g/dm VS2/ VS3/ VS4/ VS5/ VS6 Modern F3b-F3f airfoils BUILDING INSTRUCTION Allround
More informationCover the wing trailing edge and the aileron leading edge with strapping tape as shown.
Cover the wing trailing edge and the aileron leading edge with strapping tape as shown. The aileron hinges are done using strapping tape on the top and bottom surfaces of the ailerons as shown. Make sure
More information(Build Instructions)
(Build Instructions) Specifications * Wingspan: 58cm * Length: 50cm * Flying Weight: 59 grams * Channels: 3 (Rudder Elevator Throttle) * Suggested Receiver: 4Ch Micro * Motor: 8mm GearDrive * Prop: GWS
More informationRyan STA Sport Scale Model Aircraft Assembly and Instruction Manual
Ryan STA Sport Scale Model Aircraft Assembly and Instruction Manual Warning: This radio controlled model is not a toy. It requires skill to fly and is not recommended for the novice pilot. It should not
More informationSGTalon s Enterprise-A Foamie Build Guide. SGTalon s. Enterprise. Enterprise--A. Assembly Instructions
SGTalon s Enterprise SGTalon s Enterprise--A Enterprise Assembly Instructions Page 1 4-13-2013 SGTalon s Enterprise *******Recommended Hardware******** 2.6oz 250w Motor and Speed Control with 8x6 prop
More informationPrint template tiles and put together with clear tape to complete template.
Print template tiles and put together with clear tape to complete template. Cut each pattern out with scissors or use a razor and strait edge ruler. Use the ruler as a guide for the razor to get nice strait
More information30 Crack Wing. Twisted Hobbys Specifications. RC Factory. Rev: v001b 1
30 Crack Wing RC Factory By RC Specifications Wing span 30 / Length 14 AUW 90-100g 2000-2800kV outrunner motor (11g 18g) 6-12 amp ESC / 2s 180 250mAh battery 4 ch radio with Elevon Mixing 2x 4g to7g servos
More informationuin RC FPRC ZERO Specificationss Empty Weight
Flying Pengu uin RC FPRC ZERO Specificationss Wing Span 42.75 (1085 mm) Fuselage length 30.5 ( 775 mm) Empty Weight 9.5 10 oz. (150 160g) Estimated Flying Weight 20 255 oz. (320 400g) Wing Area: 151 sq.
More informationrcfoamfighters FF-VIPER-50
FOAM, GLUE, TAPE AND A LITTLE IMAGINATION... (RC Model Airplane Construction Plans) rcfoamfighters FF-VIPER-50 (Original Design by Paul Petty ) (PDF Template V1.0- Feb. 2018) THIS IS A FREE PLAN, PERMISSION
More informationZlín Z-37A Čmelák ("Bumblebee ) 850 mm. Assembly Instructions and recommended equipment of the RC model
Zlín Z-37A Čmelák ("Bumblebee ) 850 mm Assembly Instructions and recommended equipment of the RC model 1 Technical information: Wingspan: Overall Length: Flying weight: RC Functions: 850 mm 610 mm ~380
More informationBUILDING INSTRUCTION Allround fun glider PINO 3.0. PINO 3.0 Building Instruction August
Wing span [mm]: 3000 Wing area [dm2]: 54,7 Aspect ratio: 16,6 Take-off weight [g]: from about 1730-2610g Wing loading: Airfoil: 31,6-47,5g/dm MP1-1,66/7,6 to MP5-1/5 5 Modern F3b-F3f airfoils BUILDING
More informationMiniacRC MIGHTY MINI P40 WARHAWK
Hand-Cutting and Skins) MiniacRC MIGHTY MINI P40 WARHAWK FliteTest style RC model Build Instructions Make sure that the orientation for molded pieces such as the scoop rings and landing gear housings are
More informationPreliminary pilot information
Recommended RC-components: Preliminary pilot information RC-component suggestions for Freestyler 3, V-tail version FLAPS AILERONS V-tail receiver battery low-cost HS85 MG HS85 MG HS81 MG SMC 14 4 x AA
More informationBUILDING INSTRUCTION ERWIN XL ultralight. Erwin XL ultralight building Instruction August
Wing span [mm]: 3000 Aspect ratio: 14,67 Wing area [dm2]: 61,33 Wing loading: from 19,6 Weight [g]: from 1200 Airfoil: VS1 BUILDING INSTRUCTION ERWIN XL ultralight www.pcm.at 1 CONTENTS DATA 1. Kit Contents
More informationFOXTECH Nimbus VTOL. User Manual V1.1
FOXTECH Nimbus VTOL User Manual V1.1 2018.01 Contents Specifications Basic Theory Introduction Setup and Calibration Assembly Control Surface Calibration Compass and Airspeed Calibration Test Flight Autopilot
More informationHercules Twin Puller 66" and 78" Building Instructions
Hercules Twin Puller 66" and 78" Building Instructions The EPP Hercules Twin Pullers are some of the toughest BIG FPV planes on the planet. They are unique because they can take off the ground without
More informationSpecifications Wingspan: 43cm Flying Weight: 33 grams (with battery) Channels: 3 Suggested Receiver: 4Ch Micro Motor: 7mm Brushed Geardrive
Specifications Wingspan: 43cm Flying Weight: 33 grams (with battery) Channels: 3 Suggested Receiver: 4Ch Micro Motor: 7mm Brushed Geardrive Airframe Kit (Included Contents) * Airframe Parts Sheets (Depron)
More informationE-AERO EPP PITTS KIT From BP HOBBIES. Parts Included in kit
E-AERO EPP PITTS KIT From BP HOBBIES Parts Included in kit Thank you for purchasing the BP Hobbies/E-aero EPP Pitts. Please take the time to read through the instruction manual before beginning the build.
More informationEXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description
EXTRA 330SC 60CC Item No:H G060011 Specifications Wing Span Length Wing Area Flying Weight Gasoline Radio Description Carbon Fibre : 92" (2347mm) 84 1/2 " (2060mm) 1526.8 sq in(98.5sq dm) 16 17lbs(7300
More informationElf Manual 2e 06/01/2012
Elf Manual 2e 06/01/2012 ELF - a low weight mosquito class 1m span discus launched glider. The ELF allows the pilot to soar in small places as never before. ELF s high tech construction makes the model
More informationMagpie. Foam Trainer. Magpie Specifications
Magpie Foam Trainer Magpie Specifications Length: 34in. Wingspan (SF): 46in. Wing Area (SF): 414in 2 Wingspan (SP): 40in. Wing Area (SP): 360in 2 Weight (without battery): 12oz. Thank you for purchasing
More informationFirst cut the carbon wires to smaller pieces according to the following table (use sharp tongs and sand the ends of the rods)
Dear Customer, You have bought the Pipe, a competitive indoor aerobatic plane. Before you start building the plane, read carefully the instructions and make sure you understand the sequence of operations.
More informationF3A -70E ASSEMBLY MANUAL
F3A -70E ASSEMBLY MANUAL The new F3A-70E, was designed in an extremely lightweight structure, the all wood airframe, and the new revolutionary Lift Generator on landing gear give the F3A-70E an impressive
More informationBUILDING INSTRUCTION Allround fun glider PINO. PINO Building Instruction July
Wing span [mm]: 2500 Wing area [dm2]: 44 Aspect ratio: 14 Take-off weight [g]: from 1500-2200g Wing loading: Airfoil: 34-50g/dm VS2/ VS3/ VS4/ VS5/ VS6 Modern F3b-F3f airfoils BUILDING INSTRUCTION Allround
More informationParkJet Builder s Manual
ParkJet Builder s Manual Thank you for purchasing the ParkJet. The ParkJet is a profile ducted fan airplane that can be flown in a larger park. The ParkJet was initially designed by Scott Stoops and modified
More informationBUILDING INSTRUCTION ERWIN XL. Erwin XL building Instruction September
Wing span [mm]: 3000 Aspect ratio: 14,67 Wing area [dm2]: 61,33 Wing loading: 42,4-66,8 Weight [g]: 2600-4100 Airfoil: VS1 BUILDING INSTRUCTION ERWIN XL www.pcm.at 1 CONTENTS DATA 1. Kit Contents 2. What
More informationTaylorcraft Indoor / Cul-De-Sac Flyer
Taylorcraft Indoor / Cul-De-Sac Flyer Taylocraft Specifications Wingspan: 28.0 in. Wing Area: 117 sq. in. Weight (Ready to Fly): 3.0 3.1 oz. Wing Loading: 3.7 3.8 oz. / sq. ft. LIABILITY RELEASE In that
More information1. Build the bottom first - make sure your table is flat. Build the entire plane using foam safe CA and kicker. The best technique is to spray kicker
Wxá zç uç `tçué 1. Build the bottom first - make sure your table is flat. Build the entire plane using foam safe CA and kicker. The best technique is to spray kicker on one part and apply a sparing amount
More informationBUILDING INSTRUCTION ERWIN. Erwin building instruction September
Technical data: Wing span [mm]: 2045 Weight [g]: 1300-1600 Wing loading [g/dm 2 ]: 44,0-54,2 Airfoill: HQW/1,5/7mod-gestrakt Aspect ratio: 13,54 Controls: H/S/Q/W Construction: Fuselage CFR/GFR strengthened
More informationBuilding Instructions. Scarlet RC model aircraft. Order No. 1308/00. Specification: approx mm. rudder, flaps, throttle.
Building Instructions RC model aircraft Order No. 1308/00 Specification: Wingspan Length Wing area All-up weight Wing loading RC functions approx. 3000 mm approx. 1270 mm approx. 53.5 dm² approx. 1.45
More informationBUILDING INSTRUCTION Allround fun glider PINO 3.0 E-Version. PINO 3.0 E Building Instruction August
Wing span [mm]: 3000 Wing area [dm2]: 54,7 Aspect ratio: 16,6 Take-off weight [g]: from about 1830-2710g Wing loading: Airfoil: 31,6-47,5g/dm MP1-1,66/7,6 to MP5-1/5 5 Modern F3b-F3f airfoils BUILDING
More informationVIPER 140 Manual. Release 1.0 January 2018
VIPER 140 Manual Release 1.0 January 2018 Please read this user manual carefully, it contains instructions for the correct assembly of the model. Please refer to the web site www.harlock-rc.com for updates
More informationElevator Rudder Airbrake Aero-tow release (optional) Throttle (electric version)
Building Instructions Fauvel AV-361 RC glider Order No. 1363/00 Specification: Wingspan: Length: Wing area: Weight, glider: Wing loading: Weight, electric glider: Wing loading: RC functions: Recommended
More informationBUILDING INSTRUCTION ERWIN. Erwin building instruction November
Tecnical data: Wing span [mm]: 2000 Weight [g]: 1100-1600 Wing loading [g/dm 2 ]: 37,3-54,2 Airfoill: HQW/1,5/7mod-gestrakt Aspect ratio: 13,54 Controls: H/S/Q/W Construction: Fuselage CFR/GFR strengthened
More informationULS Cherokee. Ultra Low Speed aircraft for indoor RC flying. Zippkits. Specifications: Required to complete:
Zippkits ULS Cherokee Ultra Low Speed aircraft for indoor RC flying. Specifications: Span- 28 inches Wing Area- 151 Sq/In Wing Loading- 3.0 ounces/ft Weight- 3.5 ounces RTF Build time- 1-2 Hours Radio-
More informationThank you for your purchase of the Lee Ulinger, FoamtanaS, Yak-55, or Extra 330 3D Depron foam, Aerobatic airplane.
Thank you for your purchase of the Lee Ulinger, FoamtanaS, Yak-55, or Extra 330 3D Depron foam, Aerobatic airplane. Tools you will need to build Recommended additional items: #11 hobby knife Motor: Hacker
More informationOpen Source Foam Cutter
Open Source oam utter 4 axis, cheap, modular N hot wire foam cutter Ver. esc. y ate 0.2 OpenS version R. Lodde 22-10-15 Specifications This machine cuts foam (PS, PP, etc.) by moving a hot wire. The wire
More informationT-15 EDF INSTRUCTION MANUAL. Wingspan.31in. Weight..2.5 lb. EDF...70mm 12 Blade ToughJets, LLC Kittery, ME Page 1 of 22.
TM T-15 EDF INSTRUCTION MANUAL Specifications Wingspan.31in Length..41.75in Wing Area 515 sq in EDF...70mm 12 Blade Weight..2.5 lb Radio...3 channel Motor...Brushless Battery 14.8v 2200mah 40c 2013 ToughJets,
More informationPROCTOR. Instruction Manual Book 95% ALMOST READY TO FLY. Item code: BH154. SPECIFICATION ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER
Instruction Manual Book PROCTOR Item code: BH154. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER 95% ALMOST READY TO FLY SPECIFICATION Wingspan: 1,360 mm (53.54 in). Length: 1,480 mm(58.27 in).
More informationRESolution V2 Manual
RESolution V2 Manual Note for the German Manual: Yellow Bottle thick CA Pink Bottle Med CA Blue tube 5 minute Epoxy Green tube 90 Minute Epoxy Construction of the Fuselage Step 1: Cover the plan with a
More informationTWEETY Instruction Manual. Almost-Ready-to-Fly Nitro/Electric Aerobatic Airplane SPECIFICATIONS FEATURES
TWEETY - 40 Almost-Ready-to-Fly Nitro/Electric Aerobatic Airplane Instruction Manual SPECIFICATIONS WINGSPAN: 60.1in (1526mm) LENGTH: 46.5in (1180mm) WING AREA: 654 sq in (42.2 sq dm) FLYING WEIGHT: 5.5
More information35 Magnum. Instruction Manual
EPP EPP 35 35 Magnum Rebel Z Instruction Manual This is how your kit will arrive When cutting the hardware package open use caution. The contents are semi-coiled to fit in the box. They will spring open
More informationParkflyer F6F Hellcat
Parkflyer F6F Hellcat Page 1 of 19 MOLT MODELS Background Design Philosophy When I was first introduced to this hobby seventeen years ago I saw my first WWII warbird and I was hooked. Several years later
More informationPASSION SKILLS PUT AT DISPOSAL OF IDEAS SHARING EXPERIENCES THAT GENERATE KNOWLEDGE. Certification ISO 9001 : 2008
PASSION SKILLS PUT AT DISPOSAL OF IDEAS SHARING EXPERIENCES THAT GENERATE KNOWLEDGE Certification ISO 9001 : 2008 2 FASI Engineering Srl Headquarters: Turin, Italy Year of constitution: 01/2003 Aquisition:
More informationBUILDING INSTRUCTION ERWIN XL slope. Erwin XL slope building Instruction August
Wing span [mm]: 3000 Aspect ratio: 14,67 Wing area [dm2]: 61,33 Wing loading: 49-70 Weight [g]: 3000-4500 Airfoil: VS1 BUILDING INSTRUCTION ERWIN XL slope www.pcm.at 1 CONTENTS DATA 1. Kit Contents 2.
More information34" PELICAN by CRASH TEST HOBBY
34" PELICAN by CRASH TEST HOBBY The Pelican is a 34" trainer that can level its own wings and put its nose on the horizon once trimmed and balanced. It can handle more wind than most EZ flying planes in
More informationPrecut Wingola Kit Instructions
Precut Wingola Kit Instructions Below is the precut option. Battery compartment, Receiver and Servo Trays are cut for mini radio gear. This is the uncut version. It has the placement laid out for the radio,
More informationRevolution 3D-mini ARF
Revolution 3D-mini ARF 1 Included Hardware 4 Dubro Micro Control Horns #DUB848 2.32 x 18" Linkage Wire (Music Wire) 1 1.5 x 1.25 x 1/8 Balsa Ply (for motor mount) 1 5" piece of Velcro (Optional recommended,
More informationAure. Radio required : 3 channels, 4 servos airplane radio. Specifications. * Specifications are subject to change without notice.
A L M O S T- R E A D Y- T O - F LY Aure INSTRUCTION MANUAL Radio required : 3 channels, 4 servos airplane radio Specifications Wing Span Wing Area Flying Weight Fuselage Length 81.5 in / 2070mm 572.0 sq
More informationSwitchback Sport Builder s Manual
Switchback Sport Builder s Manual Thank you for purchasing the Switchback Sport. The Switchback Sport has been designed for the novice to intermediate pilot who wants a plane with good performance that
More informationDemonGti s EDGE mm
Wingspan: Flying Weight: Wing Area: Wing Loading: 1170mm ± 850g 460 sq. inch ±9.4 oz/sq.ft Thank you for showing interest in building my EDGE 540. The build is based on the same build techniques as my
More informationPars costruens. Differenze tra scienza e progetto (definizioni)
Pars costruens. Differenze tra scienza e progetto (definizioni) Design : the kind of intelligentaction that consists of proposing a novel idea for an artefact, so as to enable yourself or others to make
More informationThe Power User Manual V1.2 Copyright VOLO 2015 Page 1
The Power User Manual V1.2 Copyright VOLO 2015 Page 1 Thanks for purchasing The Power. Please read through the following instructions to get a full understanding of the board and how it works. Let s start
More information