SAW Bandpass Filter F4521
|
|
- Georgiana Wells
- 5 years ago
- Views:
Transcription
1 Features RF bandpass filter for CDMA0 CBand Tx. Part Usable bandwidth MHz (0 MHz ~ MHz) High attenuation No matching 0Ω singleended operation Ceramic Surface Mounted Device Package (.8 mm.8 mm ) RoHS compliant Package Dimensions.80±0..00±0..90± ±0.0.80±0. ITF A 6.0± ±0.0 Dimensions shown are nominal in millimeters Body : Al O Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0. ~.0 um, Over a.7 ~ 8.89 um Ni Plating Pin Configurations Input Output,,, 6 Case ground Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range C 0 8 Storage Temperature Range C 0 8 Power Handling Capability dbm 0 Electrostatics Sensitive Device (ESD) F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7
2 Specifications Minimum Typical Maximum Unit Center Frequency ( Fc ). MHz Insertion Loss (In Fc +/. MHz).0.8 db Amplitude Ripple (In Fc +/. MHz) 0.8. db VSWR (In Fc +/. MHz)..0 Relative Attenuation 0. MHz ~ 7. MHz 7. MHz ~. MHz 60.0 MHz ~ 6.0 MHz 0 0 db 6.0 MHz ~ 700 MHz 700 MHz ~ 000 MHz 7 0 Temperature Range (Operational) 0 8 Input RF Power (In Fc +/. MHz) 0 dbm Input/Output Impedance 0 Ohms Notes : ) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full port calibration. ) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances ) All attenuation measurements are measured relative to insertion loss F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7
3 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 0Ω Output 0Ω Marking Configuration ) ITF ) ) A ) ) Pad Number Index ) Manufacturer name ) Marking Number ) Lot Number * Ink or Laser Marking available F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7
4 Typical Performance ( at ) CH S log MAG 0 db/ REF 0 db Oct 00 :8:7 _:.706 db MHz _:. db 0 MHz _:.889 db MHz _:8. db 60 MHz _:6.87 db 6 MHz CH CENTER MHz SPAN MHz CH S log MAG db/ REF 0 db Oct 00 6::7 _:.6 db MHz mean:.8 7 db REF= s.dev:.967 db pp:.660 db CH CENTER MHz SPAN MHz F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7
5 Input / Output VSWR Charts CH S SWR / REF Oct 00 6:0:6 _:.6 CH S SWR / REF Oct 00 6:0:9 _: MHz MHz _:.7 0 MHz _:.8 0 MHz _:.67 MHz _:.0989 MHz _:.0 60 MHz _:.8 60 MHz _: MHz _: MHz CH CENTER MHz SPAN MHz CH CENTER MHz SPAN MHz Input / Output Smith Charts CH S U FS Oct 00 ::0 _: pf CH S U FS Oct 00 ::8 _: pf MHz MHz _: MHz _: MHz _: m MHz _: MHz _: MHz _: MHz _: MHz _: MHz CH CENTER MHz SPAN MHz CH CENTER MHz SPAN MHz F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7
6 Packing Specification. Reeling Quantity : 000 pcs / reel ( or 000 pcs / 7 reel ). Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification. Leader part and vacant position specification Vacant 0mm min. Component contained Vacant 0mm min. Leader part 0mm min. END START Tape Running Direction. Tensile strength of carrier tape.n/mm width Direction of pull. Top cover tape adhesion ) pull off angle : 0~ ) speed : 00mm/min ) force : 0~70g Top cover tape Carrier tape 0~ degree F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 6/7
7 Carrier Tape Dimensions [unit : mm] A.0 ± 0. B.0 ± 0. C 7. ± 0. D.70 ± 0. E.00 ± 0. F 8.00 ± 0. Part Direction Tape Running Direction Reel Dimensions [unit : mm] F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 7/7
SAW Bandpass Filter F2G12
SAW Bandpass Filter FG Features WCDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package (.0 mm *.0 mm ) Singleended Operation
More informationPin Configuration. Surface Mount 7.00 x 5.50 x 1.24 mm
Features For WiBro and WiMAX applications Usable bandwidth 10 MHz High attenuation operation 200 Ω Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb 6 MHz SAW Filter Package
More informationPin Configuration. Surface Mount 1.40 x 1.20 x 0.46 mm
Features For Satellite Radio Applications Usable Bandwidth 5 MHz Low Loss Good Selectivity Ceramic Chip Scale Package (CSP) Singleended Input,, 100Ω or 200Ω Hermetic RoHS compliant (2002/95/EC), Pbfree
More informationPin Configuration. Surface Mount 9.10 x 4.80 x 1.24 mm SMP-35C
Features For multiple applications Usable bandwidth 10 MHz Low loss High attenuation Balanced operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb Package Surface
More informationDifferential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf
SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC
More informationPin Configuration. Surface Mount x 6.50 x 1.75 mm SMP-75B
Features For broadband applications Typical 3 bandwidth of 4.9 MHz High attenuation Singleended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851551 (BW 3=4.5 MHz) Hermetic RoHS compliant
More informationPin Configuration. Surface Mount 9.00 x 7.01 x 1.50 mm SMP-35B
Features For broadband applications Typical 3 bandwidth of 65 High attenuation Singleended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851948 (BW 3=64 ) Hermetic RoHS compliant (2002/95/EC),
More informationMHz SAW Filter
Applications Smart metering Remote meter reading wireless modules Licensed band wireless General purpose wireless Product Features Usable bandwidth 15 MHz Low loss Dimensions: 3.80 x 3.80 x 1.27 mm Singleended
More information1640 MHz MHz Temperature Coefficient -30 ppm/ C Operating Temperature T A C
SF1186B-2 Designed for Front End GPS Applications Low Insertion Loss 3.0 x 3.0 x 1.3 mm Surface-Mount Case No Matching Circuit Required Complies with Directive 2002/95/EC (RoHS) Maximum Ratings at +25
More informationSAW BANDPASS FILTER. ACT PART NO.: ACTF9201_2535MHz_DCC6C
SAW BANDPASS FILTER ACT PART NO.: ACTF9201_2535MHz_DCC6C Product Type: SAW Filter Part NO.: Customer: Customer Part NO.: ACTF9201_2535MHz_DCC6C Issued Date: PREPARED BY CHECKED BY APPROVED BY Features
More informationMHz SAW Filter
Applications Wireless Infrastructure AMPS, CDMA and TDMA General Purpose RF Filter 4G, MultiStandard Band 1 Uplink Repeaters Product Features SMP12, 3.00 x 3.00 x 1.22 mm Functional Block Diagram 60 MHz
More informationVectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
More informationPreliminary. Electrical Characteristics Characteristic Sym Notes Min Typ Max Units
Preliminary SF1202D CDM 450 F-and RF SW Filter 3.8 x 3.8 x 1.4 mm Surface-mount Package Complies with Directive 2002/95/EC (RoHS) bsolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband
More informationMHz SAW Filter
Applications Wireless Infrastructure AMPS, CDMA and TDMA General Purpose RF Filter 4G, MultiStandard UMTS Bands 1 and 10 Downlink Repeaters Product Features SMP12, 3.00 x 3.00 x 1.22 mm Functional Block
More informationMHz SAW Filter
Applications General Purpose For IF applications Product Features Typical 3 db bandwidth of 18.5 MHz Low loss High Attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions:
More information/881.5 MHz SAW Duplexer
Applications General purpose wireless Femtocells Repeaters Data cards and dongles Product Features Usable bandwidth 25 MHz No matching required for operation at Ω Excellent rejection for Bluetooth and
More informationVectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
More informationModel C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It
More informationModel BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
More informationVectron International Filter specification TFS140AV 1/5
Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics
More informationVI TELEFILTER Filter specification TFS 130C 1/5
VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics
More informationModel BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
More informationVectron International Filter specification TFS 1632A 1/5
Vectron International Filter specification TFS 1632A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -0,42 pf Output: 45 Ω -0,47 pf Characteristics
More informationTQQ MHz LTE Band 7 Uplink BAW Filter
Applications LTE Band 7 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features Functional Block Diagram 70 MHz Bandwidth High Attenuation Low Loss
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationVectron International Filter specification TFS 400P 1/5
Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics
More informationVectron International Filter specification TFS246R 1/5
Vectron International Filter specification TFS26R 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances*): input: 695 Ω -1.9 pf output: 695 Ω -1.9 pf Characteristics
More informationVectron International Filter specification TFS180L 1/5
Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49
More informationTQQ MHz LTE Band 7 Uplink BAW Filter
Applications LTE Band 7 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features 70 MHz Bandwidth High Attenuation Low Loss 50 Ohm Input/Output Impedance
More informationMHz SAW Filter
Applications General Purpose For IF applications Product Features Typical 1 db Bandwidth of 1.2 MHz Low loss High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions:
More informationDetailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
More informationModel B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
More informationTop View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
More informationVI TELEFILTER Filter specification TFS 70Z 1/5
VI TELEFILTER Filter specification TFS 70Z /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 850 Ω -4,5 pf Output: 490 Ω -4, pf Characteristics
More informationData Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram.
ACFF-124 ISM Bandpass Filter (241 2482 MHz) Data Sheet Description The Avago ACFF-124 is a miniaturized Bandpass Filter designed for use in the 2.4 GHz Industrial, Scientific and Medical (ISM) band. The
More informationSPECIFICATION. Surface Acoustic Wave Filter. SMS-51-L-SFT FX-69 DATE May 16, 2014 WISOL. Byun,Kyung-Su. User WISOL CO., LTD.
SPECIFICATION Surface Acoustic Wave Filter USER USER PART No. SEMCO PART No. DOC. No. DATE May 16, 2014 REVISION Preliminary WISOL Kim,Young-Hun Byun,Kyung-Su Choi. Jae hyeong ISSUED BY APPROVED BY (R&D)
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationMHz SAW Filter
Applications Base Station Infrastructure LTE Macrocells General Purpose Wireless Product Features SMP28B 7.1 x 5.51 x 1.63 mm Functional Block Diagram Usable bandwidth of 6 MHz Balanced operation High
More informationSAW Components Data Sheet B4926
Features Low-loss IF filter for mobile telephone Channel selection in GSM systems Hermetically sealed ceramic SMD package Balanced and unbalanced operation possible No coupling coil required Terminals
More informationVectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
More informationTop View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
More informationFeatures. = +25 C, Vcc = +5V [1]
Typical Applications Low Noise wideband MMIC VCO is ideal for: Features Wide Tuning Bandwidth Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Pout:
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics
More informationMHz BAW Filter
Applications Satellite Radio antenna modules Satellite Radio devices Suitable for Automotive applications Compliant to the AECQ0 Grade 2 reliability standard CSP 1713, 1.7 X 1.3 X 6 mm Product Features
More informationModel C2327J5003AHF Rev D
Model C2327J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C2327J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package.
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2653 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 27,66 Ω -0,01 pf Output: 27,66 Ω -0,01 pf
More informationVectron International Filter specification TFS1220 1/5
Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics
More informationVectron International Filter specification TFS455D 1/5
Vectron International Filter specification TFS455D 1/5 Measurement condition Ambient temperature To: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationTQQ MHz LTE Band 3 Uplink BAW Filter
Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss
More informationModel C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C57J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C57J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. The
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2533 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: * Input: 27,22 Ω -,32 pf Output: 27,22 Ω -,32 pf Source:
More informationVectron International Filter specification TFS1590 1/5
Vectron International Filter specification TFS1590 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationModel BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
More informationVI TELEFILTER Filter specification TFS 230 1/5
VI TELEFILTER Filter specification TFS 230 1/5 Measurement Condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating impedances *: for input: 1,95 kω // -5,0 pf for output: 1,67 kω // -5,3
More informationTfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
More informationVectron International Filter specification TFS1575AG 1/5
Vectron International Filter specification TFS1575AG 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark:
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationVI TELEFILTER Filter specification TFS 248F 1/5
VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference
More informationVI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationVectron International Filter specification TFS 281 1/5
Vectron International Filter specification TFS 281 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -12.5 pf Output: 172 Ω -12.6 pf Characteristics
More informationVectron International Filter specification TFS1255A 1/5
Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationModel PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
More informationModel BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1226 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 338 Ω -1.6 pf Output: 338 Ω -1.6 pf Characteristics
More informationData Sheet. ACFF-1025 LTE Band 41 Bandpass Filter. Features. Description. Specifications. Functional Block Diagram. Applications
ACFF-125 LTE Band 41 Bandpass Filter Data Sheet Description The Avago ACFF-125 is a highly miniaturized LTE Band 41 (2496 269 MHz) bandpass filter combined with a WLAN/Wi-Fi band reject filter. The ACFF-125
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth Pout:
More informationVectron International Filter specification TFS 1227A 1/5
Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics
More informationA 2.4 GHz WLAN/BTLTE Co-Existence Filter
Applications Automotive Telematics and Infotainment 2.4 GHz ISM Applications & Smart Energy WiFi bandpass filter that enables the coexistence of 3G/4G/LTE/TD-LTE & WiFi signals WLAN systems (Higher power
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
More informationVectron International Filter specification TFS 500 1/5
Vectron International Filter specification TFS 500 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 415 Ω -1 pf Output: 415 Ω -1 pf External
More informationVectron International Filter specification TFS 1575AA 1/5
Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationInsertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location
Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile
More informationVectron International Filter specification TFS 868P 1/5
Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics
More informationVI TELEFILTER Preliminary specification TFS 1575N 1/5
VI TELEFILTER Preliminary specification TFS 1575N 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
More informationVI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
More informationGHz BAW Filter
Applications WiFi/ ISM notch filter to enable coexistence between WiMAX/LTE/TD-LTE & WiFi/BT/ISM radios Applicable passbands: 2.6 GHz WiMAX/LTE, 2.3 GHz WiMAX/LTE, LTE Bands 7 & 38, TD-LTE Band 40, WCS,
More informationGHz WLAN/BT LTE Co-Existence Filter
Applications WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TD-LTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters High-power WLAN Access Points Applicable reject
More informationVectron International Filter specification TFS 522 1/5
Vectron International Filter specification TFS 522 1/5 Measurement condition Ambient temperature (T 0): 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS 867A 1/5
Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationData Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
More informationData Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram
ACMD-6125 Band 25 Duplexer Data Sheet Description The Avago ACMD-6125 is a highly miniaturized duplexer designed for use in Band 25 (185.25 1914.75 MHz UL, 193.25 1994.75 MHz DL) handsets and mobile data
More informationReturn loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationPreliminary Datasheet
Device Features This can be operated at Vd of 3.0V N.F = 0.78 db @ 1850MHz at Demo board 31.5 dbm Output IP3 at 0dBm/tone at 1850MHz 15.6 db Gain at 1850MHz 17.7 dbm P1dB at 1850 MHz Lead-free/Green/RoHS
More informationPART NUMBER: ACTR MHz-DCC6C-75kHz-v1.1 Frequency: MHz
PART NUMBER: ACTR3028-315MHz-DCC6C-75kHz-v1.1 Frequency: 315.000MHz Features 1-port Resonator Provides reliable, fundamental mode, quartz Frequency stabilization i.e. in transmitters or local oscillators
More informationHMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Satcom Military Radar, EW, & ECM Functional Diagram Features Wide Tuning Bandwidth
More informationTELEFILTER Filter Specification TFS 141 C 1/5
TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics
More informationDATASHEET. It needs tuning process for customer s device. AMOTECH
Document Datasheet Type Dielectric Chip Antenna Application 1575.42 & 1592~1610MHz Part No. AMAN1003015ST03 Revision 1.0 DATASHEET Application GPS(1575.42 MHz) & Glonass (1592~1610 MHz) Features PIFA Structure
More informationVI TELEFILTER Filter Specification TFS 70U - 1/5
Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics
More informationVectron International Filter specification TFS 942G 1/5
Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationGHz WLAN/BT LTE Co-Existence Filter
Applications WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TDLTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters Highpower WLAN Access Points Applicable reject
More informationVectron International Filter specification TFS 737 1/5
Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
More informationSAW Components Data Sheet B3750
Features Ceramic package QCC8C RF low-loss filter for remote control receivers Package for Surface Mounted Technology (SMT) Balanced and unbalanced operation possible Passivation layer: Protec Terminals
More informationVectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
More informationData Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-637 LTE Band 7 Duplexer Data Sheet Description The Avago ACMD-637 is a highly miniaturized duplexer designed for use in LTE Band 7 (25 257 MHz UL, 262 269 MHz DL) handsets and mobile data terminals.
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The HMC652LP2E
More informationTQQ1013 Band 13 SAW Duplexer
Applications LTE Handsets, Data Cards & Mobile Routers Band 13 777 787 MHz Uplink 746 756 MHz Downlink 8 Pin 2.5 x 2.0 mm Package Product Features NoDrift SAW Technology With Near Zero TCF Low Insertion
More informationData Sheet. ACMD-7605 Miniature UMTS Band 8 Duplexer. Description. Features. Specifications
ACMD-765 Miniature UMTS Band 8 Duplexer Data Sheet Description The Avago Technologies ACMD-765 is a miniature duplexer designed for use in UMTS Band 8 (88 915 MHz UL, 925 96 MHz DL) handsets and mobile
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1575 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More information