USB-B1 User Manual V1.1
|
|
- Joshua Dean
- 5 years ago
- Views:
Transcription
1 USB-B1 User Manual V1.1 Table of Contents 1 Introduction Device Overview System Overview Connectors USB Connector J External Antenna Connector (J10) External / PCB Antenna Selection Connectors J8 and J IO and Peripherals Configuration Header Electrical Characteristics Test Conditions Absolute Maximum Ratings Operating Conditions GPIO Antenna Output Flash IDAC Parameters Example Measurement (Error and Offset) PWM ADC Comparator System and functionality Mechanical Dimensions
2 1 Introduction 1.1 Device Overview Features Applications Low cost RFID Reader with Mifare Classic, Ultralight and NTAG2 support Command interface via USB COM PORT with optional AES-128 encryption UART baud rate up to bps High transponder read and write speed -25 C to 85 C operating range 4 configurable GPIOs with interrupts 3 configurable PWMs Comparator ADC Current Output DAC AES-128 encryption engine Multiple internal reference voltages RoHS compliant Access control Monitoring goods Approval and monitoring consumables Pre-payment systems Managing resources Connection-less data storage systems Evaluation and development of RFID systems Description The USB-B1 module is an expansion of the RFID B1 module - the second in an evolving family of 13.56MHz sub assemblies from Eccel Technology Ltd (IB Technology). The product is designed with both embedded applications and computing / PLC platforms in mind. This product is an ideal design choice if the user wishes to add RFID capability to their design quickly and without requiring extensive RFID and embedded software expertise and time. An on board low power ARM microcontroller handles the RFID configuration setup and provides the user with a powerful yet simple command interface to facilitate fast and easy read/write access to the memory and features of the various transponders supported by this module. 2
3 1.2 System Overview The USB-B1 device is an extension of our RFID B1 module. Below, In Figure 1.1 the System Diagram is presented. 5V to 3.3V Voltage Converter PCB RFID Antenna +3.3V USB Type B Connector (J11) FTDI FT234XD USB to Com Port Converter UART RFID B1 Module ANT Signals RFID Antenna Switch (J8 and J9) +5V IO + Peripherals Header Connector External RFID Antenna Connector (J10) Figure 1.1 System Diagram 3
4 1.3 Connectors Picture 1-1 In Picture 1-1 there are marked connectors available for the user when working with the USB-B1 device USB Connector J11 The device provides communication and power via USB J11 connector. It is a micro USB type B connector. The USB port, connected to the FTDI FT234XD chip, provides USB to COM Port functionality. The user can configure the COM Port with a baud rate up to the maximum allowed by the RFID B1 module External Antenna Connector (J10) The user has the option to work with an external RFID antenna connected to the USB-B1 device. Connector J10 is where to plug in an external antenna. Eccel Technology Ltd provides a variety of RFID antennas which the user can use together with this device. 4
5 1.3.3 External / PCB Antenna Selection Connectors J8 and J9 To switch between the PCB antenna and an external antenna, two jumpers have to be used with the J8 and J9 connectors IO and Peripherals Configuration Header The device PCB connects the pins on this header to all IOs and peripherals provided by the onboard RFID B1 module. Also, available are pins facilitating connection to an onboard buzzer, button and LEDs for use as required To fulfil the needs required when connecting external electronics, a few pins are available providing +5V, +3.3V and GND signals. 2 Electrical Characteristics 2.1 Test Conditions Typical device parameters were measured at an ambient temperature 22 C ±3 C and using a power supply of 5V ±5%. 2.2 Absolute Maximum Ratings Symbol Parameter Min Max Unit Notes T S Storage Temperature C V USBMAX USB Supply Voltage V V IOMAX Input Pin Voltage V I IOMAX Output Pin Current 0 6 ma I ANT ANT1 and ANT2 Current ma Table 2.1 Maximum continuous current. This depends upon the impedance of the circuit between ANT1 and ANT2 at 13.56MHz. I 3V3OUT +3.3V Output Current ma This parameter is also limited by the USB Power Supply current limit. 5
6 2.3 Operating Conditions Symbol Parameter Min Max Unit T O Ambient Temperature C V USB USB Supply Voltage V V 3V3 +3.3V Generated Voltage V 2.4 GPIO Table 2.2 Symbol Parameter Min Typ Max Unit Notes V IOIL Input Low Voltage 0.3V 3V3 V V IOIH Input High Voltage 0.7V 3V3 V I IOMAX Output Pin Current ± 6 ma I IOLEAK Input Leakage Current ± 0.1 ± 40 na High impedance IO connected to V 3V3 or GND. R IOESD Internal ESD Series Resistor 2.5 Antenna Output 200 Ω V IOHYST IO Pin Histeresis 0.1V 3V3 V Table 2.3 Symbol Parameter Min Typ Max Unit Notes f ANT Antenna Signal Frequency MHz ±30 ppm (-20 C - 70 C). f ANTAG Antenna Signal Frequency Aging 0 3 ppm At 25 C. V ANTH Antenna High Level Output Voltage V 3V V I ANT = 80mA. V ANTL Antenna Low Level Output Voltage 0.64 V I ANT = 80mA. I ANT ANT1 and ANT2 Current ma Maximum continuous current. This depends upon the impedance of the circuit between ANT1 and ANT2 at 13.56MHz. Table 2.4 6
7 2.6 Flash Symbol Parameter Min Typ Max Unit Notes C FE Flash Erase Cycles Before Failure cycles T FDR Flash Data Retention Time 10 years For ambient temperature < 85 C 20 years For ambient temperature < 70 C Table IDAC Parameters Precision Range No Range [µa] Step Size [na] Nominal Current [µa] Current drop at Vdd mv [%] IDAC Parameters Source Temperature coefficient [na/ C] Table 2.6 Voltage coefficient [na/v] Current drop at 200 mv [%] Sink Temperature coefficient [na/ C] Voltage coefficient [na/v] 0 < 0 ; 1.6 > ( 1.6 ; 4.7 > ( 4.7 ; 16 > ( 16 ; 64 >
8 Figure 2.1 Source Current 8
9 Figure 2.2 Sink Current 9
10 2.7.2 Example Measurement (Error and Offset) Range 0 - Error [%] vs Curent [na] Figure kΩ Sourcing Range 1 - Error [%] vs Curent [ua] Figure kΩ Sourcing 10
11 Range 2 - Error [%] vs Curent [ua] Figure kΩ Sourcing Range 3 - Error [%] vs Curent [ua] Figure kΩ Sourcing 11
12 Range 0 - Error [%] vs Curent [na] Figure kΩ Sinking Range 1 - Error [%] vs Curent [ua] Figure kΩ Sinking 12
13 Range 2 - Error [%] vs Curent [ua] Figure kΩ Sinking Range 3 - Error [%] vs Curent [ua] Figure kΩ Sinking 13
14 Range 0 - Error [%] vs Curent [na] Figure MΩ Sourcing Range 0 - Error [%] vs Curent [na] Figure MΩ Sinking 14
15 2.8 PWM PWM Parameters Period Frequency Minimum Maximum Minimum Maximum Maximum Error [µs] [s] [Hz] [khz] [%] Table ADC Symbol Parameter Min Typ Max Unit Notes V ADCIN Input Voltage Range V Internal 2.5V reference voltage used. I ADCIN Input Current 100 na C ADCIN Input Capacitance 2 pf R ADCIN Input On Resistance 1 MΩ Table Comparator Symbol Parameter Min Typ Max Unit Notes V CMPIN Input Voltage Range 0 V 3V3 V V CMPOFST Offset Voltage mv V CMPHYST Hysteresis 50 mv Table
16 3 System and functionality From the system and functionality point of view, the USB-B1 device gives the same features as the RFID B1 module, and the user should refer to RFID B1 User Manual when working with USB-B1. The FTDI chip expands communication interface to the on-board RFID B1 module and allows the board to be connected to a computer and communicate with the device via a USB Com Port. Most systems have built-in drivers for such a Com Port. 4 Mechanical Dimensions Figure
RS232-B1 User Manual V1.2 05/10/2017
RS232-B1 User Manual V1.2 05/10/2017 Table of Contents 1. Introduction...2 1.1 Device Overview... 2 1.2 System Overview... 3 1.3 Features... 3 1.4 Connectors... 4 1.4.1 RS232 Connectors (J1, J2)... 4 1.4.2
More informationAO-1505-THM ZigBee Temperature and Humidity Sensor
Features Reliable wireless transceiver module. Compatible with Peer to Peer, Star, Tree, or Mesh network configurations. AO-50 with on board PCB ANT with 50M range (LOS). AO-50A with external Antenna.
More informationGAUSS High Power UHF Radio
[] Table of contents Table of contents... 1 1. Introduction... 3 Features... 4 Block Diagram... 6 2. Pinouts... 7 3. Absolute Maximum Ratings... 9 4. General Recommended Operating Conditions... 10 5. RF
More informationCharacteristic Sym Notes Minimum Typical Maximum Units Operating Frequency Range MHz Operating Frequency Tolerance khz
DEVELOPMENT KIT (Info Click here) 2.4 GHz ZigBee Transceiver Module Small Size, Light Weight, +18 dbm Transmitter Power Sleep Current less than 3 µa FCC and ETSI Certified for Unlicensed Operation The
More informationApplication Note of RingCore210 Family. (Optimized Vibration Driver) V1.3 May, 2011
RingCore Family Application Note #54 (AN54-V1.3) Application Note of RingCore210 Family (Optimized Vibration Driver) V1.3 May, 2011 CORERIVER Semiconductor reserves the right to make corrections, modifications,
More informationCharacteristic Sym Notes Minimum Typical Maximum Units Operating Frequency Range MHz Operating Frequency Tolerance khz
DEVELOPMENT KIT (Info Click here) 2.4 GHz ZigBee Transceiver Module Small Size, Light Weight, Low Cost Sleep Current less than 3 µa FCC and ETSI Certified for Unlicensed Operation The ZMN2405 2.4 GHz transceiver
More informationSG2525A SG3525A REGULATING PULSE WIDTH MODULATORS
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS 8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL
More informationPin 19 GPIO. Counters/Delay Generators CNT1 CNT2 CNT3 CNT4 CNT5 CNT6 CNT7 CNT8 CNT9. DFF/Latches. Pin 15 GPIO DFF0 DFF1 DFF2 DFF3 DFF4
GreenPAK Programmable Mixed-signal Matrix Features Logic & Mixed Signal Circuits Highly Versatile Macro Cells Read Back Protection (Read Lock) 1.8V (±5%) to 5V (±10%) Supply Operating Temperature Range:
More informationFeatures. Applications
DATASHEET IDTHS221P10 Description The IDTHS221P10 is a high-performance hybrid switch device, combined with hybrid low distortion audio and USB 2.0 high speed data (480 Mbps) signal switches, and analog
More information16 Channels LED Driver
16 Channels LED Driver Description The SN3216 is a fun light LED controller with an audio modulation mode. It can store data of 8 frames with internal RAM to play small animations automatically. SN3216
More informationCYD8945 High Reliability Hall Effect Switch IC
CYD8945 High Reliability Hall Effect Switch IC The CYD8945 Hall-Effect switch, produced with ultra-high voltage bipolar technology, has been designed specifically for automotive and industrial applications
More informationUSB-TEMP and TC Series USB-Based Temperature Measurement Devices
USB-Based Temperature Measurement Devices Features Temperature and voltage measurement USB devices Thermocouple, RTD, thermistor, or semiconductor sensor measurements Eight analog inputs Up to ±10 V inputs*
More informationDISCONTINUED. Modulation Type Number of RF Channels 15
RFM Products are now Murata products. 2.4 GHz Spread Spectrum Transceiver Module Small Size, Light Weight, Built-In Antenna Sleep Current less than 3 µa FCC, Canadian IC and ETSI Certified for Unlicensed
More informationRF RECEIVER DECODER RDF1. Features Complete FM Receiver and Decoder. Applications
Features Complete FM Receiver and Decoder. Small Form Factor Range up to 200 Metres* Easy Learn Transmitter Feature. Learns 40 transmitter Switches 4 Digital and 1 Serial Data outputs Outputs, Momentary
More informationHigh Precision 10 V IC Reference AD581
High Precision 0 V IC Reference FEATURES Laser trimmed to high accuracy 0.000 V ±5 mv (L and U models) Trimmed temperature coefficient 5 ppm/ C maximum, 0 C to 70 C (L model) 0 ppm/ C maximum, 55 C to
More information32-bit ARM Cortex-M0, Cortex-M3 and Cortex-M4F microcontrollers
-bit ARM Cortex-, Cortex- and Cortex-MF microcontrollers Energy, gas, water and smart metering Alarm and security systems Health and fitness applications Industrial and home automation Smart accessories
More informationRevision History. Rev. No Issued Date Page Description Summary. V Initial Release
Revision History Rev. No Issued Date Page Description Summary V0.1 2017-06-07 Initial Release 2 List of Contents 1. General... 4 1.1 Overview... 4 1.2 Features... 5 1.3 Application... 5 1.4 Pin Configuration...
More informationAL3157 Evaluation Module
Device Features Dual-Mode 1x and 2x Charge Pump V IN Range: 2.7V to 5.5V Up to 300mA total drive capability: Three 30mA and One 210mA Channels Two Simple PWM Dimming Control Inputs 1.2 MHz Constant Switching
More informationRT mA 3-Channel Pulse Dimming Current Source LED Driver. General Description. Features. Applications. Ordering Information. Pin Configurations
0mA -Channel Pulse Dimming Current Source LED Driver General Description The RT902 is a high performance constant current driver for white LED. It supports up to white LEDs and regulates a constant current
More informationWJM1000. Next Generation RFID Reader Module Based on the WJC200 Gen2 RFID reader chipset. Key Features
Key Features Multi-protocol support: ISO 18000-6C (Gen2) & ISO 18000-6B Dynamic RF output power: 10dBm to 24dBm range Two antenna ports for added flexibility Special high performance single tag access
More informationMOS (PTY) LTD. E Single Channel PIR Signal Processor. Applications. General Description. Features. Digital Sensor Assembly with E931.
General Description The integrated circuit is designed for interfacing Passive Infra Red (PIR) sensors with micro-controllers or processors. A single wire Data Out, Clock In (DOCI) interface is provided
More informationAdvanced Analog Technology, Inc. October 2009 AAT1301 PACKAGE PACKING TEMP RANGE MARKING. T: Tape and Reel. 20 C to +85 C.
`Product information presented is current as of publication date. Details are subject to change without notice PROGRAMMABLE VCOM BUFFER FEATURES I 2 C Interface Output Range Adjustable by Resistors 7 Bits
More informationNTE1786 Integrated Circuit Frequency Lock Loop (FLL) Tuning & Control Circuit
NTE1786 Integrated Circuit Frequency Lock Loop (FLL) Tuning & Control Circuit Description: The NTE1786 is an integrated circuit in a 24 Lead DIP type package that provides closed loop digital tuning of
More informationHigh-Precision Voltage References with Temperature Sensor
General Description The MAX6173 MAX6177 are low-noise, high-precision voltage references. The devices feature a proprietary temperature-coefficient curvature-correction circuit and laser-trimmed thin-film
More informationDatasheet DS0011 AM093 Wireless Meter-Bus Dual Band 169/868MHz Narrowband Modem Advance Information Production Status Production
Datasheet DS0011 AM093 Wireless Meter-Bus Dual Band 169/868MHz Narrowband Modem Production Status Production Important Information The information contained in this document is subject to change without
More informationDNT24MCA DNT24MPA. Low Cost 2.4 GHz FHSS Transceiver Modules with I/O. DNT24MCA/MPA Absolute Maximum Ratings. DNT24MCA/MPA Electrical Characteristics
- 2.4 GHz Frequency Hopping Spread Spectrum Transceivers - Direct Peer-to-peer Low Latency Communication - Transmitter RF Power Configurable - 10 or 63 mw - Built-in Chip Antenna - 250 kbps RF Data Rate
More informationDNT90MCA DNT90MPA. Low Cost 900 MHz FHSS Transceiver Modules with I/O
- 900 MHz Frequency Hopping Spread Spectrum Transceivers - Direct Peer-to-peer Low Latency Communication - Transmitter Power Configurable to 40 or 158 mw - Built-in 0 dbi Chip Antenna - 100 kbps RF Data
More informationSGM2576/SGM2576B Power Distribution Switches
/B GENERAL DESCRIPTION The and B are integrated typically 100mΩ power switch for self-powered and bus-powered Universal Series Bus (USB) applications. The and B integrate programmable current limiting
More informationZigBee OEM Module. ProBee-ZE20S. Datasheet
1 ZigBee OEM Module ProBee-ZE20S Datasheet Sena Technologies, Inc. Rev 1.0.0 2 ProBee-ZE20S Datasheet Copyright Copyright 2011 Sena Technologies, Inc. All rights reserved. Sena Technologies reserves the
More informationLow-Power, Low-Drift, +2.5V/+5V/+10V Precision Voltage References
19-38; Rev 3; 6/7 Low-Power, Low-Drift, +2.5V/+5V/+1V General Description The precision 2.5V, 5V, and 1V references offer excellent accuracy and very low power consumption. Extremely low temperature drift
More informationRT9266B. Tiny Package, High Efficiency, Step-Up DC/DC Converter. General Description. Features. Applications. Ordering Information RT9266B
Tiny Package, High Efficiency, Step-Up DC/DC Converter General Description The RT9266B is a compact, high efficiency, and low voltage step-up DC/DC converter with an Adaptive Current Mode PWM control loop,
More informationCA-550 Series / CA-650 Series
WIDEBAND CURRENT AMPLIFIER CA- SERIES / CA-6 SERIES CA- Series / CA-6 Series CA- Series and CA-6 Series are low noise wideband current amplifiers (current to voltage converter) with a high gain. There
More informationVariable-Gain High Speed Current Amplifier
Features Transimpedance (gain) switchable from 1 x 10 2 to 1 x 10 8 V/A Bandwidth from DC up to 200 MHz Upper cut-off frequency switchable to 1 MHz, 10 MHz or full bandwidth Switchable AC/DC coupling Adjustable
More informationDISCONTINUED. Modulation Type Number of RF Channels 15
RFM products are now Murata Products 2.4 GHz Spread Spectrum Transceiver Module Small Size, Light Weight, Low Cost Sleep Current less than 3 µa FCC, Canadian IC and ETSI Certified for Unlicensed Operation
More information10-Bit µp-compatible D/A converter
DESCRIPTION The is a microprocessor-compatible monolithic 10-bit digital-to-analog converter subsystem. This device offers 10-bit resolution and ±0.1% accuracy and monotonicity guaranteed over full operating
More informationPRODUCT OVERVIEW OVERVIEW OTP
PRODUCT OVERVIEW 1 PRODUCT OVERVIEW OVERVIEW The S3C7324 single-chip CMOS microcontroller has been designed for high performance using Samsung's newest 4-bit CPU core, SAM47 (Samsung Arrangeable Microcontrollers).
More informationUltra-Small, Low-RON, Beyond-the-Rails DPDT Analog Switches
EVALUATION KIT AVAILABLE MAX14689 General Description The MAX14689 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails capability that allows
More informationSP4T RF Switch 50 Ω Absorptive RF switch 1 to 6000 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V
Solid state SP4T RF Switch 50 Ω Absorptive RF switch 1 to 00 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V The Big Deal High isolation, 57 db up to 2.7 GHz High linearity, IP3 +58 dbm at 1900
More informationUNISONIC TECHNOLOGIES CO., LTD
U UNISONIC TECHNOLOGIES CO., LTD REGULATING PWM IC DESCRIPTION The UTC U is a pulse width modulator IC and designed for switching power supplies application to improve performance and reduce external parts
More informationMODEL: 20VS2-02. Hybrid IC Isolation Amplifiers 20 Series
MODEL: 0VS-0 Hybrid IC Isolation Amplifiers 0 Series ISOLATION AMPLIFIER (-port isolation) Functions & Features Being used for printed wiring board installation High-linearity Low power consumption Isolating
More informationLX7157B 3V Input, High Frequency, 3A Step-Down Converter Production Datasheet
Description LX7157B is a step-down PWM regulator IC with integrated high side P-CH MOSFET and low side N-CH MOSFET. The 2.2MHz switching frequency facilitates small output filter components. The operational
More information802.11g Wireless Sensor Network Modules
RFMProducts are now Murata Products Small Size, Integral Antenna, Light Weight, Low Cost 7.5 µa Sleep Current Supports Battery Operation Timer and Event Triggered Auto-reporting Capability Analog, Digital,
More informationDNT2400. Low Cost 2.4 GHz FHSS Transceiver Module with I/O
2.4 GHz Frequency Hopping Spread Spectrum Transceiver Point-to-point, Point-to-multipoint, Peer-to-peer and Tree-routing Networks Transmitter Power Configurable from 1 to 63 mw RF Data Rate Configurable
More informationCurrent Transducer CTSR 1-P = 1A
Current Transducer CTSR 1-P I PRN = 1A For the electronic measurement of current: DC, AC, pulsed..., with galvanic isolation between the primary (high power) and the secondary circuit (electronic circuit).
More informationSNIOT702 Specification. Version number:v 1.0.1
Version number:v 1.0.1 Catelog 1 Product introduction... 1 1.1 Product introduction... 1 1.2 Product application... 1 1.3 Main characteristics... 2 1.4 Product advantage... 3 2 Technical specifications...
More informationRT mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RT9193 is designed for portable RF and wireless applications with demanding performance and space requirements. The RT9193 performance
More informationS3C9442/C9444/F9444/C9452/C9454/F9454
PRODUCT OVERVIEW 1 PRODUCT OVERVIEW SAM88RCRI PRODUCT FAMILY Samsung's SAM88RCRI family of 8-bit single-chip CMOS microcontrollers offers a fast and efficient CPU, a wide range of integrated peripherals,
More informationRT9728C. 120mΩ, 1.3A Power Switch with Programmable Current Limit. General Description. Features. Applications. Pin Configurations
RT9728C 120mΩ, 1.3A Power Switch with Programmable Current Limit General Description The RT9728C is a cost effective, low voltage, single P-MOSFET high-side power switch IC for USB application with a programmable
More informationMAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch
Click here for production status of specific part numbers. MAX2327 12V Capable, Low-R ON, General Description The MAX2327 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth Pout:
More informationNJM2720. Single Ultra-High speed and Wide Band Operational Amplifier
NJM272 Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM272 is a single, ultra-high speed and wide band operational amplifier that features 2V/μs slew rate and 1ohm
More informationFeatures. = +25 C, Vcc = +5V [1]
Typical Applications Low Noise wideband MMIC VCO is ideal for: Features Wide Tuning Bandwidth Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Pout:
More informationPrecision, Micropower, Low-Dropout Voltage References MAX6190 MAX6195/MAX6198
19-108; Rev 3; /10 Precision, Micropower, General Description The precision, micropower, low-dropout voltage references offer high initial accuracy and very low temperature coefficient through a proprietary
More informationThis LPWAN WLRS-591EVB integrates WLRS-590 that provides ultra long range spread spectrum communication and high interference immunity.
series LoRa IoT Module Low Power Wide Area Network Solution This LPWAN integrates WLRS-590 that provides ultra long range spread spectrum communication and high interference immunity. The WLRS-590 is designed
More informationTraining Schedule. Robotic System Design using Arduino Platform
Training Schedule Robotic System Design using Arduino Platform Session - 1 Embedded System Design Basics : Scope : To introduce Embedded Systems hardware design fundamentals to students. Processor Selection
More informationModels 2601B, 2602B and 2604B
Models 2601B, 2602B and 2604B Keithley Instruments, Inc. System SourceMeter 28775 Aurora Road Instrument Specifications Cleveland, Ohio 44139 1-888-KEITHLEY http://www.keithley.com SPECIFICATION CONDITIONS
More informationRT Channel Charge Pump White LED Driver with Low Dropout Current Source. Preliminary. Features. General Description. Ordering Information
4-Channel Charge Pump White LED Driver with Low Dropout Current Source General Description The is a high efficiency and cost effective charge pump white LED driver. It supports up to 4 white LEDs with
More informationAF10 PWM Generator. Manual. Valid as of firmware version v1.4.1
AF10 PWM Generator Manual Valid as of firmware version v1.4.1 1 AF10 PWM Generator Manual Contents 1 Controls... 4 1.1 Main switch (back)... 4 1.2 ON button... 4 1.3 Esc button... 4 1.4 Setup button...
More informationZigBee SE2.0 - IEEE OASIS RF MODULE
FEATURES +20dBm (100mW) Nominal Transmit Power Dual Antenna Ports for Indoor Applications Very small 25mm x20mm x 1.7mm form factor Long range-up to 1000 meters LoS MKW22D512V 50MHz 32 bit ARM Cortex M4
More informationCharacteristic Sym Notes Minimum Typical Maximum Units Operating Frequency Range MHz. RF Chip Rate 11 Mcps RF Data Rates 1, 2, 5.
RFM Products are now Murata products. Small Size, Light Weight, Low Cost 7.5 µa Sleep Current Supports Battery Operation Timer and Event Triggered Auto-reporting Capability Analog, Digital, Serial and
More informationShenzhen Tuofeng Semiconductor Technology Co., Ltd
TF PROGRAMMABLE PRECISION REFERENCES The is three-terminal adjustable shunt regulator with specified termal stability. The output voltage may be set to any value between (Approx. 2.5V) and 36V with two
More informationDNT90MC DNT90MP. Low Cost 900 MHz FHSS Transceiver Modules with I/O
- 900 MHz Frequency Hopping Spread Spectrum Transceivers - Direct Peer-to-peer Low Latency Communication - Transmitter Power Configurable to 40 or 158 mw - 100 kbps RF Data Rate - Serial Port Data Rate
More informationPhase-locked loop PIN CONFIGURATIONS
NE/SE DESCRIPTION The NE/SE is a versatile, high guaranteed frequency phase-locked loop designed for operation up to 0MHz. As shown in the Block Diagram, the NE/SE consists of a VCO, limiter, phase comparator,
More informationRT9041A/B. 500mA, Low Voltage, LDO Regulator with External Bias Supply. General Description. Features. Applications. Ordering Information
RT9041A/B 500mA, Low Voltage, LDO Regulator with External Bias Supply General Description The RT9041A/B are low voltage, low dropout linear regulators with an external bias supply input. The bias supply
More informationRFFM V to 4.0V, 450MHz to 470MHz Transmit/Receive Front End Module
.V to.0v, 0MHz to 0MHz Transmit/Receive Front End Module Package Style: LGA, 8-Pin,.mm x.0mm NC 8 Features Tx Output Power: 0dBm Tx Gain: 0dB Separate 0Ω Tx/Rx Transceiver Interface Rx Insertion Loss:
More informationRT9266B Tiny Package, High Efficiency, Step-up DC/DC Converter General Description Features 1.0V Low Start-up Input Voltage at 1mA Load
查询 RT9266 供应商 Tiny Package, High Efficiency, Step-up DC/DC Converter General Description The is a compact, high efficiency, and low voltage step-up DC/DC converter with an Adaptive Current Mode PWM control
More informationTOP VIEW. Maxim Integrated Products 1
19-3474; Rev 2; 8/07 Silicon Oscillator with Low-Power General Description The dual-speed silicon oscillator with reset is a replacement for ceramic resonators, crystals, crystal oscillator modules, and
More information6V8 * ESDA6V8UD ESDA6V8UD. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More informationMADR V to 250V Driver for High Power PIN Diode Switches Rev. V1. Functional Schematic. Features. Description. Pin Configuration 1
Features 20 V to 250 V Back Bias in Off State 200 ma Series Diode Bias Current at +25 C 50 ma Shunt Diode Bias Current at +25 C Propagation Delay less than 8 µs Low Quiescent Current Consumption 3 V or
More informationRT9728A. 120mΩ, 1.3A Power Switch with Programmable Current Limit. General Description. Features. Applications. Pin Configurations
RT9728A 120mΩ, 1.3A Power Switch with Programmable Current Limit General Description The RT9728A is a cost effective, low voltage, single P-MOSFET high side power switch IC for USB application with a programmable
More informationSelf-Oscillating Half-Bridge Driver
Self-Oscillating Half-Bridge Driver Features Product Summary Floating channel designed for bootstrap operation Integrated 600V half-bridge gate driver 15.6V zener clamp on Vcc True micropower start up
More informationHigh Performance, Constant Current Switching Regulator For White LED
High Performance, Constant Current Switching Regulator For White LED General Description The is a high frequency, asynchronous boost converter for constant current white LED driver applications. The internal
More informationExample Application Circuit: Non-Inverting Amplifier + GreenPAK with Wake-Sleep Controller
Rail to Rail I/O 375 na/amp Dual/Quad CMOS Op Amps with Power Down General Description The SLG8813/4 is a wide voltage range, 375 na Dual/Quad Channel CMOS Input Operational Amplifier capable of rail-to-rail
More informationAudio, Dual-Matched NPN Transistor MAT12
Data Sheet FEATURES Very low voltage noise: nv/ Hz maximum at 00 Hz Excellent current gain match: 0.5% typical Low offset voltage (VOS): 200 μv maximum Outstanding offset voltage drift: 0.03 μv/ C typical
More informationSpin Semiconductor FV-1 Reverb IC PN: SPN1001. Delay Memory DSP CORE. ROM and Program Control PLL. XTAL Drvr XTAL. Spin.
Featuring Virtual Analog Technology PN: SPN1001 FEATURES Integrated stereo ADC and DAC 8 internal demonstration programs + 8 external programs Easy customization with external EEPROM 3 potentiometer inputs
More informationREVISION HISTORY. 8/15 Revision 0: Initial Version. Rev. 0 Page 2 of 17
Dual, 6-Bit nanodac+ with 4 ppm/ C Reference, SPI Interface FEATURES High relative accuracy (INL): ±4 LSB maximum at 6 bits Low drift.5 V reference: 4 ppm/ C typical Tiny package: 3 mm 3 mm, 6-lead LFCSP
More informationMicro Power PIR signal Op Amp. China: ZL
Patent Number Micro Power PIR signal Op Amp Taiwan: M455864 China: ZL 2013 2 0099927.6 General Description is a micro power CMOS chip IC design to detect PIR signal control IC. PIR sensor detect infrared
More informationEAYW ESD5425E ESD5425E. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high
More informationMCU with 315/433/868/915 MHz ISM Band Transmitter Module
MCU with 315/433/868/915 MHz ISM Band Transmitter Module (The purpose of this RFM60 spec covers mainly for the hardware and RF parameter info of the module, for MCU and software info please refer to RF60
More informationDual, 16-Bit nanodac+ with 4 ppm/ C Reference, SPI Interface AD5689R-EP
Dual, 6-Bit nanodac+ with 4 ppm/ C Reference, SPI Interface FEATURES High relative accuracy (INL): ±4 LSB maximum at 6 bits Low drift.5 V reference: 4 ppm/ C typical Tiny package: 3 mm 3 mm, 6-lead LFCSP
More information10-Channel Gamma Buffer with VCOM Driver ADD8710
1-Channel Gamma Buffer with VCOM Driver ADD871 FEATURES Single-supply operation: 4.5 V to 18 V Upper/lower buffers swing to VS/GND Gamma continuous output current: >1 ma VCOM peak output current: 25 ma
More informationRT9728A. 120mΩ, 1.3A Power Switch with Programmable Current Limit. General Description. Features. Applications. Pin Configuration
120mΩ, 1.3A Power Switch with Programmable Current Limit General Description The is a cost effective, low voltage, single P-MOSFET high-side power switch IC for USB application with a programmable current
More informationDigital Signal Detector Interface IC PS202
General Description The detector Integrated circuit is designed for interfacing Passive sensors with microcontrollers or processors. A single wire Data Out, Clock In (DOCI) interface is provided for interfacing
More informationDNT900. Low Cost 900 MHz FHSS Transceiver Module with I/O
DEVELOPMENT KIT (Info Click here) 900 MHz Frequency Hopping Spread Spectrum Transceiver Point-to-point, Point-to-multipoint, Peer-to-peer and Tree-routing Networks Transmitter Power Configurable from 1
More informationLow Noise 300mA LDO Regulator General Description. Features
Low Noise 300mA LDO Regulator General Description The id9301 is a 300mA with fixed output voltage options ranging from 1.5V, low dropout and low noise linear regulator with high ripple rejection ratio
More informationPRODUCT HIGHLIGHT. C B 10nF L1 4.7 H. R1 49.9k. R2 16.2k. Typical Application
DESCRIPTION KEY FEATURES The is a 1.4MHz fixed frequency, current mode, PWM buck (stepdown) DC-DC converter, capable of driving a 1.5A load with high efficiency, excellent line and load regulation. The
More informationPCI-EXPRESS CLOCK SOURCE. Features
DATASHEET ICS557-01 Description The ICS557-01 is a clock chip designed for use in PCI-Express Cards as a clock source. It provides a pair of differential outputs at 100 MHz in a small 8-pin SOIC package.
More informationSR A, 30V, 420KHz Step-Down Converter DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION
SR2026 5A, 30V, 420KHz Step-Down Converter DESCRIPTION The SR2026 is a monolithic step-down switch mode converter with a built in internal power MOSFET. It achieves 5A continuous output current over a
More informationUNISONIC TECHNOLOGIES CO., LTD UM601A
UNISONIC TECHNOLOGIES CO., LTD VOLTAGE AND CURRENT CONTROLLER DESCRIPTION The UTC integrated circuit incorporates a high stability series band gap voltage reference, two ORed operational amplifiers and
More informationHAL , 508, 509, HAL , 523 Hall Effect Sensor Family MICRONAS. Edition Feb. 14, E DS
MICRONAS HAL1...6, 8, 9, HAL16...19, 23 Hall Effect Sensor Family Edition Feb. 14, 21 621-19-4E 621-48-2DS MICRONAS HALxx Contents Page Section Title 3 1. Introduction 3 1.1. Features 3 1.2. Family Overview
More information5V 4 * 1 5 ESD5344D ESD5344D. Descriptions. Features. Order information. Applications. http//:www.sh-willsemi.com
ESD5344D 4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ESD5344D is an ultra-low capacitance TVS (Transient Voltage Suppressor)
More informationSingle 0.275% Comparator and Reference with Dual Polarity Outputs ADCMP361
Data Sheet FEATURES mv ±.275% threshold Supply range:.7 V to 5.5 V Low quiescent current: 6.5 µa typical Input range includes ground Internal hysteresis: 9.3 mv typical Low input bias current: ±5 na maximum
More informationHigh Voltage, Current Shunt Monitor AD8215
High Voltage, Current Shunt Monitor AD825 FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead
More informationCONDOR C1722 GPS RECEIVER MODULE technical notes
CONDOR C1722 GPS RECEIVER MODULE TECHNICAL HIGHLIGHTS Receiver: GPS L1 frequency (1575.42 MHz), C/A code, 22-channel continuous tracking NMEA output and input: serial port, USB port On-board low noise
More informationcss Custom Silicon Solutions, Inc.
css Custom Silicon Solutions, Inc. GENERAL PART DESCRIPTION The is a micropower version of the popular timer IC. It features an operating current under µa and a minimum supply voltage of., making it ideal
More informationNJM2823. Precision Micropower Shunt Voltage Reference
Precision Micropower Shunt Voltage Reference GENERAL DESCRIPTION NJM2823 is a precision and low quiescent current shunt voltage reference. Reference voltage form bandgap circuit has guaranteed the high
More informationSGM3798 Audio Headset Analog Switch with Reduced GND Switch R ON and FM Capability
GENERAL DESCRIPTION The is an audio headset analog switch that is used to detect 3.5mm accessories and switch SLEEVE and RING2 by external controller. The ground signal is routed through a pair of low-impedance
More informationTL431 PROGRAMMABLE PRECISION REFERENCES FEATURES FUNCTION BLOCK DIAGRAM.
PROGRAMMABLE PRECISION REFERENCES The TL43 is three-terminal adjustable shunt regulator with specified termal stability. The output voltage may be set to any value between V REF (Approx. 2.5V) and 36V
More informationMIC Features. General Description. Applications. Ordering Information. 3A Fast-Response LDO Regulator for USB
3A Fast-Response LDO Regulator for USB General Description The is a 3A, fast response, low-dropout (LDO) voltage regulator. Using Micrel s proprietary Super βeta PNP process, the offers exceptional dropout
More informationPrecision Instrumentation Amplifier AD524
Precision Instrumentation Amplifier AD54 FEATURES Low noise: 0.3 μv p-p at 0. Hz to 0 Hz Low nonlinearity: 0.003% (G = ) High CMRR: 0 db (G = 000) Low offset voltage: 50 μv Low offset voltage drift: 0.5
More information