Electrical Specifications
|
|
- Bertina Quinn
- 5 years ago
- Views:
Transcription
1 Series 0 Watts C-Class Non-Isolated SXX06E Rev Page of 2 of Total Power: 0 Watts Input Voltage: Vdc No. of s: Single Special Features 0 A current rating Adjustable output voltage: V Excellent transient response Power enable ( pin model) Minimum airflow Small package Termination voltage capability RoHS compliant Electrical Specifications voltage See Note V setpoint accuracy 0.% trim resistors ±.0% Line regulation Low line to high line ± 0.2% Load regulation Full load to min. load ± 0.% Min./max. load 0 A/0 A Overshoot At turn-on 0.% max. Undershoot At turn-off 00 mv max. Ripple and noise Hz to 20 MHz See Note 20 mv Vin = V, Vout = 2. V Transient response See Notes, 2 30 mv max. deviation µs recovery to within regulation band Input Input voltage range Vdc Input current Minimum load Remote OFF 0 ma ma Input current (max.) See Note 3 0 lo max. Start-up time Power up 3 ms Remote ON/OFF 2 ms Safety UL, cul CAN/CSA 22.2 No. E3942 TÜV Product Service (EN6090) Certificate No. TBD CB Report and Certificate to IEC6090
2 General Efficiency (high input) Vin= V, Vo=2. V, lo=0 A 9% typical Switching frequency Fixed 620 khz Approvals and standards (pending) Material flammability Weight MTBF 2 40 C, 00% load Bellcore 332 EN6090 UL/cUL690 UL94V g (0.067 oz.) > 8,220,20 hours 2 of Coplanarity Surface mount models 0 µm Environmental Specifications Thermal performance See Note Protection Short-circuit Operating ambient, temperature Non-operating -40 C to +8 C -40 C to +2 C Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 µf See Note 7 0 µf Ordering Information Power (Max.) Input Voltage OVP Voltage Current (Min.) Current (Max.) Efficiency (Typical) Regulation Line Load Model Number (3,) 0 W Vdc N/A V 0 A 0 A 94% ± 0.2% ± 0.% -00W0-VJ 0 W Vdc N/A V 0 A 0 A 94% ± 0.2% ± 0.% -00W0-HJ 0 W Vdc N/A V 0 A 0 A 94% ± 0.2% ± 0.% -00W0-SJ
3 Part Number System with Options 3 of Product Family Product Family LDO = C-Class LDO Series Rated Current Rated Current 0 = 0 Amp Performance Performance C = Cost Optimized Input Voltage Input Voltage 00 = V Number of Pins and Type of Number of Pins and Type of W = Pins and Wide Voltage Voltage 0 = V Mounting Option RoHS Compliance (8) LDO 0 C 00 W 0 V J Mounting Option V = Vertical H = Horizontal S = Surface RoHS Compliance J = Pb free (RoHS 6/6 compliant) Y = non PB-free (TSE /6 compliant) Voltage Adjustment of the LDO03C Series The ultra-wide output voltage trim range offers major advantages to users who select the LDO00C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of Vdc. When the LDO03C converter leaves the factory, the output has been adjusted to the default voltage of 0.9 V. Remote ON/OFF 4 V out LDO 0C Notes: Measured as per recommended system capacitance. See Application Note di/dt = 0 A/µs, Vin = Nom, Tc = 2 C, load change = 0.0 lo to full lo and full lo to External input fusing is recommended. 4 Additional part numbers may be available with different output voltages. Airflow dependent, 00 LFM minimum required. 6 No capacitors needed for ripple current capability. 7 No capacitors needed for stability. 8 NOTICE: the input voltage must be greater than the programmed output voltage. the max duty cycle is 9%. These non-isolated dc-dc modules are buck converters. V in GND C in 2 3 R trim (fortrim down) C out Figure : Standard Application Drawing R L O A D
4 Mechanical Drawings 4 of Vertical Mount Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ± (± 0.76) 3 Places ± 0.00 (± 0.2). Enable. Trim MAX.062 REF.0 REF ± X.067 TYP SQ PINS TYP Figure 2: Vertical Mount Mechanical Drawing Horizontal Mount Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ± (± 0.76) 3 Places ± 0.00 (± 0.2).4 MAX.40. Enable. Trim 6. Mech Pin REF.0 REF.02±.00 SQ PIN TYP 6 PLACES TYP.20 TYP 4X.067 TYP Figure 3: Horizontal Mount Mechanical Drawing
5 SXX06E Rev Page of 2 Surface Mount Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ± (± 0.76) 3 Places ± 0.00 (± 0.2) 0.60 (6.) 0.03 (0.89) REF (0.4) - 00W0-0 (0.00) 0.00 (.27) 0.07 (.80) 0.38 (3.) 0.20 (.2). Enable. Trim 6. Mech Pin 7. Mech Pin (6.9) (8.6) (9.4) (3.3) 0.0 (.40) REF 0.2 (3.8) TYP (.7) REF (.02) REF Figure 4: Surface Mount Mechanical Drawing (0.64) REF Americas of 80 Van Allen Way Carlsbad, CA USA Telephone: Facsimile: Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY LX United Kingdom Telephone: +44 (0) Facsimile: +44 (0) Asia (HK) /F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: Facsimile: For global contact, visit: EmbeddedPower While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 200 Emerson Electric Co.
1 V/ms V typ. Track input voltage: Pin 8 (See Note 6, page 3) ± 0.3 Vin
1 Vin 1 of 5 Total Power: Watts # of Outputs: Single Special Features A output current 1 V input voltage Wide-output voltage adjust 1. Vdc - 5.5 Vdc for suffix W & 0.8 Vdc - 1.8 Vdc for suffix L Auto-track
More informationPTH03060Y & PTH05060Y PTH12060Y. Vin increasing Vin decreasing PTH05060Y PTH12060Y PTH12060Y
3.3/5/ of 5 Total Power: Watts # of Outputs: Single Special Features V TT bus termination output (output the system V REF ) 0 A output current 3.3, 5 or Vdc input voltage DDR and QDR compatible ON/OFF
More informationPTH03010Y & PTH05010Y PTH12010Y. Vin increasing Vin decreasing PTH05010Y PTH12010Y PTH12010Y
PTHxx00Y 3.3/5/ Rev. 3.3.09_3 of 5 Total Power: Watts # of Outputs: Single Special Features bus termination output (output the system V REF ) 5 A output current 3.3, 5, or Vdc input voltage DDR and QDR
More informationLDO03C SERIES. Single Output. LDO03C Series 3 A DC-DC C Class Non-Isolated DC/DC Converter [ 2 YEAR WARRANTY ]
LDO03C SERIES Single Output 3 A current rating Input voltage range 3-13.8 V Adjustable output voltage 0.59-5.1 V Optional 3-pin model factory set Optional 5-pin model factory set with power good option
More informationElectrical Specifications
Single & Quad output 1 of 5 Total Power: 80-110 W Input Voltage: 85-264 Vac 120-370 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Overvoltage and short circuit protection
More informationQUARTER-BRICK QUARTER-BRICK SERIES. Single Output Ultra Products. Special Features
QUARTER-BRICK SERIES Embedded Power for Business-Critical Continuity QUARTER-BRICK SERIES 1 of 28 Total Power: 150-200W Total Power: -- Input Voltage: 36-75Vdc Input Voltage: -- # of Outputs: Single Output
More informationElectrical Specifications
usiness-ritical ontinuity L Watts onvection/onduction Mounting Rev. 1..1_11 L Series 1 of 7 Total Power: W # of Outputs: Single Output: 1,, 8 V Special Features W Full power at elevated temperatures Wide
More informationEIGHTH-BRICK SERIES. Single Output Value Products. Special Features
EIGHTH-BRICK SERIES Embedded Power for Business-Critical Continuity 1 of 31 EIGHTH-BRICK SERIES Total Power: 50 W Input Voltage: 36-75 VDC # of Outputs: Single Special Features High efficiency topology
More informationEIGHTH-BRICK SERIES. 24 V Input, Single Output. Special Features
EIGHTH-BRICK SERIES Embedded Power for Business-Critical Continuity EIGHTH-BRICK SERIES 1 of 15 Total Power: 66 W Input Voltage: 18-36 VDC # of Outputs: Single Special Features High efficiency topology
More informationElectrical Specifications
usiness-ritical ontinuity L Watts onvection/onduction Mounting Rev. 1.31.11_11 L Series 1 of 7 Total Power: W # of Outputs: Single Output: 1,, 8 V Special Features 1 VD / W output power Wide Operating
More informationElectrical Specifications
Up to 6000 Watts 1 of 6 Total Power: Up to 6000 W Input Voltage: 85-264 Vac # of s: Single + Aux : 24 V & 48 V Special Features Rack mounted chassis (1U, 19 ) 3 hot pluggable rectifiers per 1U chassis,
More informationElectrical Specifications. Adjustment range Main output ± 5% Total regulation (line and load) ± 2.0% ± 5.0% Turn-on 120 Vac Input 2.0 s max.
POWER Data Sheet NLP250 Series Single Output Total Power: 250 W Input Voltage: 85-264 Vac # of Outputs: Single SPECIAL FEATURES Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air
More informationSIL20C SERIES. Single Output. SIL20C Series 20 A DC-DC Converter C Class Non-Isolated
SIL20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
More informationEXQ125 48V SERIES. Single Output. Special Features
EXQ125 48V SERIES Embedded Power for Business-Critical Continuity EXQ125 48V SERIES 1 of 36 Total Power: 1 W Input Voltage: 33-75 VDC # of Outputs: Single Special Features High efficiency topology, 91%
More informationElectrical Specifications
POWER Data Sheet NFS110 Medical Series Single and quad output Total Power: 80-110 W Input Voltage: 100-240Vac 127-357 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Medical,
More informationPOWER. NLP40 Series. Single, Dual and Triple Output. Data Sheet
POWER Data Sheet NLP40 Series Single, Dual and Triple Output Total Power: 40-50 W Input Voltage: 90-264 Vac 120-370 Vdc # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package
More informationElectrical Specifications Input
3000 Watts 1 of 8 Distributed Power Bulk Front-End Single Output Special Features 3000 W output power 40 W/cu-in Optional customer provided air 1U x 3U form factor N+1 Redundant Hot-swap Internal OR-ing
More informationQUARTER-BRICK SERIES. Dual Output Value Products. Special Features
QUARTER-BRICK SERIES Embedded Power for Business-Critical Continuity QUARTER-BRICK SERIES 1 of 32 Total Power: 116 W Input Voltage: 36-75 VDC # of Outputs: Dual Special Features Two independent outputs
More information1 V/ms Undervoltage lockout: V typ. Track input voltage: Pin 8 (See Note 6, page 3) ± 0.3 Vin
PTH0 SERIES PTH0 Vin Total Power: 55 Watts # of Outputs: Single Special Features 0 A output current V input voltage Wide-output voltage adjust. Vdc - 5.5 Vdc for suffix W & 0.8 Vdc -.8 Vdc for suffix L
More informationSMT20C SERIES. Single Output TÜV. SMT20C Series 20 A DC-DC Converter C Class Non-Isolated
SMT20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
More informationPOWER DS Watts Distributed Power System. Data Sheet
POWER Data Sheet Distributed Power Bulk Front-End Total Output Power: 2900 Watts +3.3 Vdc Stand-by Output Wide Range Input Voltage: 180-264 Vac DS2900 2900 Watts Distributed Power System Special features
More informationSingle negative output
SIL25C SERIES Single negative output Trim range (-4.5 Vdc to -5.5 Vdc) High power density design means reduced board space requirement Remote sense Power good output signal (open collector) Operating ambient
More informationSIL20C2 Series Single Output
SIL20C2 Series 20 A DC-DC SIL20C2 Series Single Output Adjustable output voltage (0.59-5.1 V, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for
More informationElectrical Specifications
POWER Data Sheet NLP65 Series Single, Dual and Triple Output Total Power: 65-75 W Input Voltage: 85-264 Vac 120-370 Vdc* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal input 3 x 5 footprint
More informationPTH Vin single output. DC/DC CONVERTERS POLA Non-isolated 1. NEW Product
PTH0 DC/DC CONVERTERS POLA Non-isolated 0 A output current V input voltage Wide-output voltage adjust. Vdc to 5.5 Vdc for suffix W and 0.8 Vdc to.8 Vdc for suffix L Auto-track sequencing* Margin up/down
More information0.8V Vin Single output
SIL15E-12V SERIES 0.8V - 3.63Vin Single output 15A Current rating Input voltage range: 10.0V - 14.0V Output voltage range: 0.8V - 3.63V Ultra high efficiency: 94% @ 12Vin and 3.3Vout Extremely low internal
More informationPOWER CSV2000BP Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSV2000BP 2000 Watts Distributed Power System Front-end Bulk Power Total Output Power: 2000 W Input Voltage: 80 to 265 Vac Special features 2000 W output power U power supply Active Power
More informationPOWER DS1100PED Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS1100PED 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 1100 W output power High-power
More informationPOWER. LGA50D Standard Profile Series Dual O/P Non-isolated 50 A Digital DC/DC Converter. Electrical Specifications. PROPOSED PRODUCT Data Sheet
POWER PROPOSED PRODUCT Data Sheet Total Current: 50 A (single) 25 A (dual) Input Voltage: 7.5-14 Vdc Variable Output: 0.6-5.0 V (standard profile) LGA50D Standard Profile Series Dual O/P Non-isolated 50
More informationPOWER CSU550AP. 550 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSU550AP 550 Watts Distributed Power System Front-end Bulk Power Total Output Power: 550 W continuous Wide Input Voltage: 90-264 Vac; 164-320 Vdc SPECIAL FEATURES 550 W output power High
More informationPOWER CSV900BP. 900 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSV900BP 900 Watts Distributed Power System Front-end Bulk Power Total Output Power: 900 W Input Voltage: 90 to 264 Vac SPECIAL FEATURES 900 W output power U power supply Active Power
More informationPOWER DS3000PE High Line: 3000 W Low Line: 1350 W. Electrical Specifications. Data Sheet
POWER Data Sheet DS3000PE High Line: 3000 W Low Line: 1350 W Distributed Power Bulk Front-end Single Ouptut Standard Total Output Power: 3000 W continuous 208 Vac to 264 Vac, 3000 W 1 90 Vac to 140 Vac,
More informationPOWER DS750PED. 750 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS750PED 750 Watts Distributed Power System Front-end Bulk Power Total Output Power: 750 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 750 W output power High-power and
More informationElectrical Specifications. > 0.9 beginning at 20% load. ITHD 10% Leakage current. Ordering Information
POWER Data Sheet DS2000SPE Series 2000 Watts Distributed Power System Front-end Bulk Power Total Output Power: 2000 W continuous at high line 90-140 V &180-264 Vac Operation SPECIAL FEATURES 2000 W output
More informationSMT10E Series. 3.0 Vin to 5.5 Vin Single output. SMT10E Series 10 A DC-DC Converter E Class Non-Isolated
SMT10E Series 3.0 Vin to 5.5 Vin Single output 10 A Current rating Input voltage range: 3.0 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely
More informationQUARTER-BRICK SERIES Single Output Performance Products
Quarter-Brick Series 100 A DC-DC QUARTER-BRICK SERIES Single Output Performance Products High efficiency topology High output current Low profile, 0.300 inch (7.62 mm) height Unprecedented useable output
More informationPOWER. CPS250-M Series. 250 Watt AC-DC Power Supplies. Data Sheet. Total Power: 250 Watts Input Voltage: V # of Outputs: Single
POWER Data Sheet CPS50-M Series 50 Watt AC-DC Power Supplies Total Power: 50 Watts Input Voltage: 90-64 V # of Outputs: Single SPECIAL FEATURES Designed for forced air and natural convection cooling Medical
More information10 Watts. AEE00-12Vin. Electrical Specs. Special Features. Environmental. Safety. Input Voltages: Input
10 Watts AEE00-12Vin Total Power: Input Voltages: No. of Outputs: 10 Watts 12V Single and Dual Electrical Specs Input Input range Efficiency 9 to 18 VDC 78% typical (3.3V) Output Voltage tolerance ±1.0%
More informationPOWER DS500SDC. 500 Watts Distributed Power System. Data Sheet
POWER Data Sheet Front-end Bulk Power Total Output Power: 500 W continuous Wide Input Voltage: -36 to -72 Vdc DS500SDC 500 Watts Distributed Power System SPECIAL FEATURES 500 W output power High power
More informationNON-ISOLATED DC/DC CONVERTERS 4.5 Vdc Vdc Input Vdc Vdc/20 A Output. Bel Power Inc., a subsidiary of Bel Fuse Inc.
NONISOLATED DC/DC CONVERTERS 4.5 Vdc 13.8 Vdc Input 0.591 Vdc 5.1 Vdc/20 A Output xrp120e1a0 RoHS Compliant Rev. I NonIsolated Wide Output Trim Range High Efficiency Output OverVoltage Shutdown Fixed Switching
More information200 WATT TH SERIES DC/DC CONVERTERS
Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection
More informationPOWER. CPS250-M Series. 250 Watt AC-DC Power Supplies. Data Sheet. Total Power: 250 Watts Input Voltage: V # of Outputs: Single
POWER Data Sheet CPS50-M Series 50 Watt AC-DC Power Supplies Total Power: 50 Watts Input Voltage: 90-6 V # of Outputs: Single SPECIAL FEATURES Designed for forced air and natural convection cooling Medical
More informationPOWER CSV1300BP Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSV300BP 300 Watts Distributed Power System Front-end Bulk Power Total Output Power: 300 W continuous at high line Input Voltage: 90 to 37 Vac, 80 to 264 Vac SPECIAL FEATURES 300 W output
More informationPOWER DS1100PED Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS1100PED 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100 W continuous Wide Input Voltage: 90-264 Vac SPECIAL FEATURES 1100 W output power High-power
More informationPOWER DS1600SPE Watts Distributed Power System. Electrical Specifications. Ordering Information. Data Sheet
POWER Data Sheet DS1600SPE 1600 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1600 W continuous at high line Wide Range Input Voltage: 90-264 Vac SPECIAL FEATURES 1600 W output
More informationCV SERIES. 1.8 to 45 Watts VDC, VDC, 10-30VDC Input Ranges Adjustable Output Voltage Non-Isolated DC/DC Converters
DATASHEET CV SERIES 2.-.VDC, 4.-4VDC, 0-30VDC Input Ranges FEATURES Output Current up to 3A Output Power Range 2.-.VDC, 4.-4VDC, and 0-30VDC Input Voltage Ranges High Efficiency - 9% at 2VDC and Full Load
More informationPOWER DS250SPE. 250 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS250SPE 250 Watts Distributed Power System Front-end Bulk Power Total Output Power: 250 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 250 W output power High power and
More informationCLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
More informationQUARTER-BRICK SERIES Single Output Value Products
Quarter-Brick Series 50 A DC-DC QUARTER-BRICK SERIES Single Output Value Products High efficiency topology High output current Low profile, 0.300 inch (7.62 mm) height Unprecedented useable output power
More informationThe 0RQB-C5U54x is an isolated DC-DC converter that operates from a nominal 24 VDC, 48 VDC source.
The 0RQB-C5U54x is an isolated DC-DC converter that operates from a nominal 24 VDC, 48 VDC source. This unit will provide up to 162 W of output power from a nominal 24 VDC, 48 VDC input. This unit is designed
More informationISOLATED DC/DC CONVERTERS 48 Vdc Input, 12 Vdc/8.35 A Output
0RQB-C0U12C RoHS Compliant PRELIMINARY Rev.A Isolated Output Over Voltage Shutdown High Efficiency OCP/SCP High Power Density Over Temperature Protection Low Cost Remote On/Off Input Under Voltage Lockout
More informationElectrical Specifications. Input range Vac (Operating) 115/230 Vac (Nominal) TERMINAL BLOCK Frequency Hz, Nominal 50/60
POWER Data Sheet LCM300 310 Watt Bulk Front End Total Power: 310 W # of Outputs: Single Outputs: 12 to 60 V Optional 5.0 V standby SPECIAL FEATURES 310 W output power (350 W at 45 C for 24 V and 36 V models)
More informationPOWER DS1100SLPE Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS1100SLPE 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 1100 W output power High power
More informationNetworking Computers and Peripherals Telecommunications
The 0RCY-60U12x is part of the isolated DC/DC converters that operate from a wide input range (18 VDC - 75 VDC) and can cover both 24 Vin and 48 Vin input range. These units will provide up to 84 W of
More informationSXN15 48V SERIES. Dual output TÜV. High Efficiency DC/DC Converters
SXN15 48V SERIES Dual output High efficiency topology, 86% typical at 5V/3.3V Wide operating temperature, up to and exceedingly 65ºC (natural convection) 9% to 11% output trim No minimum load Overvoltage
More informationPTV Vin single output. DC-DC CONVERTERS POLA Non-isolated 1. NEW Product
DC-DC CONVERTERS POL Non-isolated 1 16 output current 12 V input voltage Wide-output voltage adjust 1.2 Vdc to 5.5 Vdc for suffix W and 0.8 Vdc to 1.8 Vdc for suffix L uto-track sequencing* Pre-bias start-up
More informationISOLATED DC/DC CONVERTERS 48 Vdc Input 1.2 Vdc - 12 Vdc / 8.33 A - 30 A Output, 1/8 Brick Converter
48 Vdc Input 1.2 Vdc 12 Vdc / 8.33 A 3 Output, 1/8 Brick 0RCY85T Series RoHS Compliant Rev.B Isolated Output Over Voltage Shutdown High Efficiency OCP/SCP High Power Density Over Temperature Protection
More informationCXA20 SERIES. Single and dual output. Special Features
CXA20 SERIES Single and dual output Embedded Power for Business-Critical Continuity CXA20 SERIES 1 of 21 Total Power: 20 W Input Voltage: 18-75 VDC # of Outputs: Single and Dual Special Features 4:1 input
More informationDelphi D12S2R550 Non-Isolated Point of Load
FEATURES High Efficiency: 93.6% @ 12Vin, 5.0V/50A out Wide input range: 4.5V~13.8V Output voltage programmable from 0.6Vdc to 5.0Vdc via external resistors No minimum load required Fixed frequency operation
More informationTBD. Delphi E36SR Series DC/DC Power Modules: 18~60 in, 12V/4A out, 48W FEATURES OPTIONS APPLICATIONS
FEATURES High efficiency: 91% @ 12V/4A Size: 58.4x22.8x8.73mm (2.30 x0.90 x0.34 ) Standard footprint Industry standard pin out TBD Fixed frequency operation Input UVLO, Output OCP, OVP, OTP 1500V isolation
More informationOutput Input Efficiency PARD (mvp-p) Vin Nom. (V)
Features: Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 94% High reliability RoHS Compliant Cost efficient open frame design Output voltage programmable
More informationQME48T40 DC-DC Series Data Sheet VDC Input; A Output
Applications Telecommunications Data communications Wireless communications Servers, Workstations Benefits High efficiency no heat sink required Higher current capability at 70 ºC than most competitors
More informationPOWER LCM Watt Bulk Front End. Electrical Specifications. Data Sheet. Total Power: 3000 W # of Outputs: Single Outputs: 12 to 72 V
POWER Data Sheet LCM3000 3000 Watt Bulk Front End Total Power: 3000 W # of Outputs: Single Outputs: 12 to 72 V Special features 3000 W output power Low cost 2.5 x 7.0 x 10.9 15.7 Watts per cubic inch Industrial/Medical
More informationNON-ISOLATED DC/DC CONVERTERS 5 Vdc Vdc Input 0.6 Vdc Vdc/40 A Output
NONISOLATED DC/DC CONVERTERS 5 Vdc dc Input 0.6 Vdc 5.0 Vdc/40 A Output xrp240e1a0 RoHS Compliant Rev.D NonIsolated Output OverVoltage Shutdown High OCP/SCP Fixed Switching Frequency Low Output Ripple
More information25 Watt QMZ Single and Dual Series
Single and Dual Series Efficiency up to % 10 VDC Isolation 4:1 Ultra Wide Input Range Remote On/Off Control No Minimum Requirement Six Sided Shielding Trim RoHS Compliant CSA Approved Model Number Voltage
More informationElectrical Specifications. Input undervoltage shutdown/startup. 37 Vdc shutdown 93% (target for -04Y variant) Overtemperature protection (Open frame)
POWER Preliminary Data Sheet ADC100M Series 100 Amp PSA Main DC/DC Converter Total Power: 100 W, 180 W (1.0 V @ 100 A) (1.8 V @ 100 A) Input Voltage: 40-60 Vdc Single Output Versions: 0.6-1.2 V 1.6-2.0
More informationCLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
More informationElectrical Specifications. Input voltage range Vac: 1000 W/1200 W Vac: 1200 W. Max input current. ITHD 10% Leakage current
POWER Data Sheet DS1200HE 1200 Watts Distributed Power System Front-end Bulk Power Total Output Power: 180 to 264 Vac: 1200 W continuous 90 to 140 Vac: 1000 W/ 1200 W 1 continuous SPECIAL FEATURES 1200
More informationNON-ISOLATED DC/DC CONVERTERS
SRAH-05B / VRAH-05B Series RoHS Compliant Nonisolated Compact, low profile surface mount package Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for
More informationDelphi NE Series Non-Isolated Point of Load DC/DC Modules: 3.1~13.8Vin, 0.59V-5.1Vout, 3Aout
FEATURES High efficiency: 9% @ 12Vin, 5V/3A out Size: Vertical: 9.4x15.5x6.6 mm (0.37 x0.61 x0.26 ) Horizontal: 9.4x15.5x7.9mm (0.37 x0.61 x0.31 ) Wide input range: 3.1V~13.8V Output voltage programmable
More informationNON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input 5 Vdc - 12 Vdc/1A Output
NONISOLATED DC/DC CONVERTERS 9.0 Vdc 18 Vdc Input 5 Vdc 12 Vdc/1A Output xrah01k Series RoHS Compliant Rev.A NonIsolated High Efficiency Fixed Frequency (450kHz) UL609501 Recognized (UL/cUL) Low Profile
More informationPinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming
Features Regulated Converters 4:1 wide input voltage range Compact size 1 x1 package Efficiency up to % Wide operating temperature from - C to +75 C without derating Continuous short circuit protection
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationMAX. OUTPUT POWER 24/48/72/96/110 VDC 5 VDC 6 A 30 W 82% 0RQB-30Y05L. 0 R QB - 30 Y 05 L y. Output Power. Input Range
The 0RQB-30Y05L is an isolated DC/DC converter providing 30 W of output power from a wide input range (24 V, 48 V, 72 V, 96 V, 110 V typical). Standard features include remote on/off, input under-voltage
More informationVolant NEA005 Series Non-Isolated 5A SIP/SMT DC/DC Converters
Typical units FEATURES Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 92% High reliability RoHS Compliant Cost efficient open frame design Output
More informationE Class Converters. EHS20 1.2V Model. Technical enquiries tel:
Model 1.2V Units Parameter Output Voltage Setpoint 1.18 1.22 Vdc Line/Load Regulation Max 0.1% / 0.2% % Vo Output total regulation 1.16 1.24 Vdc Output adjust (note 4) 90-110 %Vo,nom Remote-sense Comp.
More informationOutput Input Efficiency PARD (mvp-p) Vin Nom. Regulation Max (V)
Features: Small size, minimal footprint SMT/SIP package A Output Current (all voltages) High Efficiency: up to 9% High reliability RoHS Compliant Cost efficient open frame design Output voltage programmable
More informationVolant NCF010 Series. Non-Isolated 10A SIP DC/DC Converters
Features: Small size, minimal footprint/low profile A Output Current (all voltages) High Efficiency: up to 95% High reliability RoHS Compliant Cost efficient open frame design Pre-bias monotonic start-up
More informationDelphi Series V36SE, 1/16 th Brick DC/DC Power Modules: 18~75Vin, up to 50W
FEATURES High efficiency: 91%@5V/10A,48Vin 90%@5V/8A,24Vin Size: 33.0x22.8x9.3mm (1.30 x0.90 x0.37 ) Industry standard 1/16th brick size & pinout Input UVLO OTP and output OCP, OVP (default is auto-recovery)
More informationDelphi Series V36SE, 1/16 th Brick DC/DC Power Modules: 18~75Vin, up to 50W
High efficiency: 91%@5V/10A,48Vin 90%@5V/8A,24Vin Size: 33.0x22.8x9.3mm (1.30 x0.90 x0.37 ) Industry standard 1/16th brick size & pinout Input UVLO OTP and output OCP, OVP (default is auto-recovery) Output
More informationFeatures. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide
Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1
More informationMTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
More informationNON-ISOLATED DC/DC CONVERTERS
S7DB-07A Series Nonisolated Compact, low profile surface mount package Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for cost Remote on/off Undervoltage
More informationDelphi NE Series Non-Isolated Point of Load
FEATURES High Efficiency: 94.% @ 12Vin, 5V/2A out Size: Vertical: 3.5x15.5x12.mm (1.2 x.61 x.47 ) Horizontal: 3.5x15.5x12.9mm (1.2 x.61 x.51 ) Wide input range: 4.5V~13.8V Output voltage programmable from.59vdc
More informationSeries AM50E-NZ 50 Watt DC-DC Converter
FEATURES: Wide Input range 2:1 Input to Output Isolation of 1500 High Efficiency up to 93% Input Over Voltage and Under Voltage Lockout Remote On/Off Control Output OVP, OCP & SCP Trim Adjustment Operating
More informationDelphi Series H48SA, 150W Half Brick Family DC/DC Power Modules: 36~75V in, 48V/3.2A out
FEATURES High efficiency: 92% @48V/3.2A Size: 57.9x61.0x9.8mm (2.28 x2.40 x0.39 ) (without Heat Spreader) 57.9x61.0x12.7mm (2.28 x2.40 x0.50 ) (with Heat Spreader) Standard footprint Industry standard
More informationSTB Series 2:1 & 4:1 Vin range / up to 60W 1/16 Brick
2:1 & 4:1 Vin range / up to W 1/16 Brick Features Industry-Standard DOSA pin out 4:1 / 2:1 Ultra-Wide input range High Ffficiency 91%@ 5V (SR topology) Compact size 1.49 x 1.46 x.5 Metal Case Six-Sided
More informationNON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc Vdc/10 A Output
VRBC10A2Ax RoHS Compliant Rev.A NonIsolated UnderVoltage Lockout (UVLO) Fixed Frequency Over Temperature Shutdown High OCP/SCP Low Cost Wide Trim Wide Input Remote Sense Flexible Output Voltage Remote
More informationSwitching Regulator. LMT78_1.0R Series Wide input, non-isolated & regulated, single output, SMD package
Efficiency up to 95 No need for heat sinks 1.0AMP SMD package Wide input voltage range (4.75V - 36V) Adjustable output voltage Remote ON/OFF control Short circuit protection (SCP), thermal shutdown Very
More informationNON-ISOLATED DC/DC CONVERTERS 2.4 Vdc Vdc Input 0.75 Vdc Vdc/6 A Output
VRBA06F2Ax RoHS Compliant Rev.A NonIsolated Undervoltage Lockout (UVLO) High Wide Trim High Power Density OCP/SCP Fixed Frequency (300 khz) Remote On/Off Flexible Output Voltage Active Low/High (option)
More informationNON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc Vdc/3 A Output
VRBA03A1Ax RoHS Compliant Rev.A NonIsolated UnderVoltage Lockout (UVLO) Fixed Frequency OCP/SCP High Efficiency Remote On/Off High Power Density Wide Trim Range Active Low/High (Option) Wide Input Range
More informationEfficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
More informationDelphi ND Series Non-Isolated Point of Load
FEATURES High efficiency: 94% @ 12Vin, V/4A out Size: 36.8mm x 32.2mm x 13.mm (Vertical) (1.4 x1.27 x.1 ) 36.8mm x 32.2mm x 14.8mm (Horizontal) (1.4 x1.27 x.8 ) Resistor-based trim No minimum load required
More informationE Class Converters. EHS20 1.8V Model
Model 1.8V Units Parameter Output Voltage Setpoint 1.78 1.82 Vdc Line/Load Regulation Max 0.1% / 0.2% % Vo Output total regulation 1.75 1.85 Vdc Output adjust (note 4) 90-110 %Vo,nom Remote-sense Comp.
More informationDelphi Series V36SE, 1/16 th Brick DC/DC Power Modules: 18~75Vin, 3.3Vo, 50W
High efficiency: 90.5% @ 3.3V/15A, 48Vin 88.5% @ 3.3V/12A, 24Vin Size: 33.0x22.8x9.3mm (1.30 x0.90 x0.37 ) Industry standard 1/16th brick size & pinout Input UVLO OTP and output OCP, OVP (default is auto-recovery)
More informationSwitching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
More information40 Watt TMF Single and Dual Series
Watt TMF Single and Dual Series Efficiency up to 91% 10VDC Isolation MTBF > 328,000 Hours 4:1 Wide Input Over Voltage Protection Short Circuit Protection Six Sided Shielding Remote On/Off Control RoHS
More informationEfficiency (typ.) (Range) Load VDC VDC ma ma(typ.) ma(typ.) μf % MCWI05-12S
FEATURES Smallest Encapsulated 5W Ultracompact SIP8 Package Ultrawide 4 : 1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500 VDC Operating Ambient Temp. Range40 to 75 No Min. Requirement
More informationNON-ISOLATED DC/DC CONVERTERS
S7AH-05A / V7AH-05A Series Nonisolated Compact, low profile surface mount package Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for cost Remote on/off
More informationCool Power Technologies
Cool Power Technologies Sixteenth-Brick Isolated DC/DC Converter Features Industry-standard pinout Wide input voltage range: 36 75Vin Output: 3.3 V at 12 A, 40W max. No minimum load required Low height
More information