AirGunsaProducts. Price List
|
|
- Rosamund Williamson
- 5 years ago
- Views:
Transcription
1 AirGunsaProducts Price List 2009
2 C V OC V European Directives: 1999/13/CE /42/CE Guidelines: Use products in compliance. Use spray guns with High Transfer Efficiency. Use products within enclosed areas. Respect hygiene and safety regulations. Maximum VOC content limit values for paints and varnishes: PRODUCT MAX. VOC CONTENT LIMIT FOR PRODUCTS (g/l) Preparatory and cleaning 850 Pre-cleaner 200 Bodyfiller/stopper (all types) 250 Wash primer 780 Surface/filler and general (metal) primer 540 Top coat/single coat 420 Base coat 420 Clear lacquer 420 Special finishes 840 Environmental Protection Act We certify that we have tested (Report Number: TE011) the Anest Iwata W 400 WB Gravity Spray Gun manufactured by Anest Iwata Corporation, in accordance with EN Method 2 - tests for paint transfer efficiency (by weight) and that the spray gun complies with the requirements of the UK Environmental Protection Act 1990, Part Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: 2K VHS Primer 91.0% Base coat (Waterborne) 68.7% Clear coat 77.7% Signed for MIRRC THATCHAM:...Ken Roberts Research & Operations Director Colthrop Way, Thatcham, Berkshire, RG19 4NR U.K. Date of Issue March 2002 Anest Iwata Spray Guns W 200 W 300 W 400 W 400 WB WA 100 / 101 WA 200 WRA 200 Airgunsa Spray Guns AZ3 HTE AZ10 HTE AZ40 HTE IPA Fraunhofer Certification Model AZ3 HTE 2 Test Transfer Efficiency according to EN Authority IPA Fraunhofer Institut Date 27/03/2008 Transfer efficiencies achieved with the materials detailed in the test report were: 2K Primer Coat 89 % Water based Base Coat 79 % 2K Clear Coat 84 % Anest Iwata Spray Guns W 400 W 400 WB NEW 71 NEW 77 Airgunsa Spray Guns AZ 30 HTE AZ 3 HTE2 Certification available on CE ATEX Declaration Of Conformity European Directives: 1994/9/CE /92/CE DECLARATION OF CONFORMITY We, AIR GUNSA s.r.l. - Corso Vigevano, Torino - Italy declare, under our sole responsibility, that the product: AIR GUNSA s.r.l. 46, Corso Vigevano Torino - Italy Tel Fax info@airgunsa.com CE mark permitted by the European Commission to show compliance with all EU directives applicable to a product. ATEX mark to show suitability for explosive atmospheres. model: to which this declaration relates, is in conformity with European ATEX Directive 94/9/CE for use in zone 1 and in zone 2 and Machinery Directive 98/37/CE. According with the following international requirements: EN , EN , EN and EN Product group II (Surface equipment) Name and position of issuer: Marco G. VICENTINI, Managing Director Signature: date: 04/04/2008 This is an original CE declaration of conformity issued by AIR GUNSA s.r.l. Other copies are considered not valid. Explosion risk due to presence of GAS Special precautions in instruction manual. Presence of EXplosive ATmosphere zone product category Constant 0 1 Occasional 1 2 Minimum/Short period 2 3
3 Contents Products Models Pages manual spray guns: AZ3 HTE2/AZ3 HTE2 AV/AZ3 HTE2 P AV/AZ3 HTE2 HVLP gravity feed 2 AZ30 HTE gravity feed 4 AZ40 HTE AV gravity feed 6 AZ10 HTE AV & AZ10 HTE SE suction feed 8 AZ10 HTE SP AV & AZ10 HTE PC pressure feed 10 AZ5 round pattern - gravity feed 12 accessories: MIX & SPRAY disposable gravity feed cup 14 GUN CASE for AZ3 HTE 2 14 MULTIPLE GUN CASE 14 Impact controller, Swivel quick coupling, Universal wrench Supports for gravity guns, Air filter regulator spares 15 multix: MULTI X SPRAY GUN and nozzle tips 16 garage equipment: AZ PVA & AZ PVA TN for body coating 18 P6 & PL6 for oil, fuel, petroleum and detergents 19 AE7 for mixed air and water GI10TDP & GI10TLS tyre inflating equipment 20 INFLATION HEADS S8 & SP8 blowing gun 21 ST/ ST1 & ST1 S sandblasting gun 22 superseded gun: AZ40 HTE SP & AZ40 HTE SP AV spares 23 quick couplings: Quick couplings Superflow series 24 Quick couplings 1/4 25 Quick couplings 1/4 26 Quick couplings RD_P/ AMF / AFF / AB / AFG series 27 Quick couplings AS_GHE_N series 28 Quick couplings RSVMF / RSSMM / RSVFF / RSC series 28 NOTE: This price list is valid from All prices EX WORKS TURIN. All prices/codes/designs are subject to be changed without previous notice. 1
4 AZ3 HTE 2 AZ3 HTE 2 Air Nipple: Fluid Nipple: Model AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE HTE AZ3 HTE2 P AV HTE AZ3 HTE2 P AV HTE AZ3 HTE2 P AV HTE AZ3 HTE2 P AV HTE AZ3 HTE2 P AV HTE Gravity spray gun AZ3 HTE 2 P 2 Certifications Model AZ3HTE2 Test Transfer Efficiency according to EN Authority IPA Fraunhofer Institut Date 28/03/2008 THREE COAT SYSTEM PRIMER 87 % BASECOAT 83 % CLEARCOAT 74 % Certification available on Transfer efficiencies achieved with the materials detailed in the test report were: DECLARATION OF CONFORMITY We AIR GUNSA s.r.l. - Corso Vigevano, Torino - Italy declare, under our sole responsibility, that the product: AZ3 HTE2 SPRAY GUN series to which this declaration relates, is in conformity with European ATEX Directive 94/9/CE for use in zone 1 and zone 2 and Machinery Directive 98/37/CE. According with the following international requirements: EN , EN and EN Name and position of issuer: Mr. Marco G. VICENTINI, Managing Director Firma: data: 04/04/2008 This is an original CE declaration of conformity issued by AIR GUNSA s.r.l. Other copies are considered not valid
5 AZ3 HTE cc Akulon cup cc Pressurized cup USE: Code Description ref. AZ3 HTE2 GRAVITY SPRAY GUN + 600cc AKULON CUP W0SPG80AG10C GRAVITY SPRAY GUN + AKULON CUP ø 1,0 85,00 W0SPG80AG13C GRAVITY SPRAY GUN + AKULON CUP ø 1,3 85,00 W0SPG80AG15C GRAVITY SPRAY GUN + AKULON CUP ø 1,5 85,00 W0SPG80AG18C GRAVITY SPRAY GUN + AKULON CUP ø 1,8 85,00 W0SPG80AG20C GRAVITY SPRAY GUN + AKULON CUP ø 2,0 85,00 W0SPG80AG25C GRAVITY SPRAY GUN + AKULON CUP ø 2,5 85,00 W0SPG80AG28C GRAVITY SPRAY GUN + AKULON CUP ø 2,8 85,00 W0SPG80AG30C GRAVITY SPRAY GUN + AKULON CUP ø 3,0 85,00 W0SPG80AG35C GRAVITY SPRAY GUN + AKULON CUP ø 3,5 85,00 AZ3 HTE2 AV GRAVITY SPRAY GUN + 600cc AKULON CUP & AIR FLOW CONTROL VALVE W0SPG81AG10C GRAVITY SPRAY GUN + AKULON CUP ø 1,0 92,00 W0SPG81AG13C GRAVITY SPRAY GUN + AKULON CUP ø 1,3 92,00 W0SPG81AG15C GRAVITY SPRAY GUN + AKULON CUP ø 1,5 92,00 W0SPG81AG18C GRAVITY SPRAY GUN + AKULON CUP ø 1,8 92,00 W0SPG81AG20C GRAVITY SPRAY GUN + AKULON CUP ø 2,0 92,00 W0SPG81AG25C GRAVITY SPRAY GUN + AKULON CUP ø 2,5 92,00 W0SPG81AG28C GRAVITY SPRAY GUN + AKULON CUP ø 2,8 92,00 W0SPG81AG30C GRAVITY SPRAY GUN + AKULON CUP ø 3,0 92,00 W0SPG81AG35C GRAVITY SPRAY GUN + AKULON CUP ø 3,5 92,00 AZ3 HTE2 P AV GRAVITY SPRAY GUN + 600cc PRESSURIZED AKULON CUP & AIR FLOW CONTROL VALVE W0SPG82AG13C GRAVITY SPRAY GUN + PRESSURIZED AKULON CUP ø 1,3 155,00 W0SPG82AG15C GRAVITY SPRAY GUN + PRESSURIZED AKULON CUP ø 1,5 155,00 W0SPG82AG18C GRAVITY SPRAY GUN + PRESSURIZED AKULON CUP ø 1,8 155,00 W0SPG82AG20C GRAVITY SPRAY GUN + PRESSURIZED AKULON CUP ø 2,0 155,00 W0SPG82AG25C GRAVITY SPRAY GUN + PRESSURIZED AKULON CUP ø 2,5 155,00 AIR CAP SET W2CAP80AG15 AIR CAP SET ø 1,0; 1,3; 1,5 ref. part 1 22,85 W2CAP80AG18 AIR CAP SET ø 1,8; 2,0 ref. part 1 22,85 W2CAP80AG25 AIR CAP SET ø 2,5 ref. part 1 22,85 W2CAP80AG30 AIR CAP SET ø 2,8; 3,0 ref. part 1 22,85 W2CAP80AG35 AIR CAP SET ø 3,5 ref. part 1 22,85 W2CAP84AG AIR CAP SET (for AZ3 HTE2 HVLP) ø 1,3; 1,5; 1,8; 2,0 ref. part 1 52,65 FLUID NOZZLE + FLUID NEEDLE SET W FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,20 W FLUID NOZZLE + FLUID NEEDLE SET ø 1,3 ref. part ,20 W FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,20 W FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,20 W FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,20 W FLUID NOZZLE + FLUID NEEDLE SET ø 2,5 ref. part ,20 W FLUID NOZZLE + FLUID NEEDLE SET ø 2,8 ref. part ,20 W FLUID NOZZLE + FLUID NEEDLE SET ø 3,0 ref. part ,20 W FLUID NOZZLE + FLUID NEEDLE SET ø 3,5 ref. part ,20 FLUID NOZZLE + FLUID NEEDLE SET AZ3 HTE2 HVLP W FLUID NOZZLE + FLUID NEEDLE SET ø 1,3 ref. part ,30 W FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,30 W FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,30 W FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,30 SPARES W NOZZLE HOLDER ref. part 3 5, PATTERN ADJUSTMENT SET ref. part 5 27,24 W PATTERN ADJUSTMENT SET (only for AZ3 HTE) ref. part 5 7,14 W FLUID NEEDLE ADJUSTMENT KNOB ref. part 6 1,31 W FLUID NEEDLE GUIDE ref. part 7 1,77 W FLUID NEEDLE SPRING ref. part 8 0,24 W NEEDLE PACKING NUT ref. part 10 0,66 W AIR VALVE SET ref. part 11 6,24 W AIR VALVE SPRING ref. part ,08 W AIR VALVE ref. part ,03 W AIR VALVE SEAT ref. part ,40 W2COM4001 TRIGGER STUD ref. part 12 0,60 W2COM6051 TRIGGER ref. part 13 2,67 W TRIGGER (only for AZ3 HTE) ref. part 13 2, AIR ADJUSTMENT SET (HTE 2 AV - HTE 2 P AV) ref. part , PLUG (HTE 2 - HTE 2 HVLP) ref. part ,27 W THREADED BUSHING ref. part 15 1,46 W2COM5004 SCREW (HTE 2 - HTE 2 AV - HTE 2 HVLP) ref. part ,12 W2COM6050 PLUG ref. part ,05 W3COM5032 PRESSURE REGULATOR HTE 2 P AV ref. part ,60 W2COM5000 AIR NIPPLE ref. part 17 2,21 W2KIT31 PACKING SET (3 pcs./1 pk.) ref. part C 2,32 W2KIT33 SLIDE RING KIT (10 pcs./1 pk.) ref. part D 7,80 VPACAZ3H2 BLACK PLASTIC CASE FOR AZ 3 HTE 2 (1 SPRAY GUN + 1 CUP) 25,00 W cc AKULON CUP SET ref. part 18 10,53 W2KIT07 NON DRIP SET (5 pcs./1 pk.) ref. part B 4,48 W2KIT06 PAINT FILTER SET 50 Mesh (5 pcs./1 pk.) ref. part E 13,92 W0CUPAZ82 600cc PRESSURIZED CUP SET ref. part 19 43,70 W3COM1019 ANTIDROP DISK ref. part ,00 W3COM1020 CUP + LID ref. part ,79 W3COM5031 STRAIGHT MALE ADAPTOR ref. part , AIR HOSE ref. part ,58 W2KIT32 LID PACKING SET (5 pcs./1 pk.) ref. part F 3,16 W0CUPAZ82K KIT PRESSURIZED CUP with PRESSURE REGULATOR ref. part 16-3 / 19 75,00 3
6 AZ30 HTE Air Nipple: Fluid Nipple: Model AZ30 HTE HP AZ30 HTE HP AZ30 HTE HP AZ30 HTE HP AZ30 HTE HP Gravity spray gun C Air flow control valve 25 Certifications 4
7 AZ30 HTE M&S Cup 600 cc 600 cc Akulon cup The guns are supplied with the following cups: 3 complete M&S cups 1 complete AKULON cup USE: Code Description ref. AZ30 HTE GRAVITY SPRAY GUN + 600cc M&S CUP & AIR FLOW CONTROL VALVE W0SPG33AG10C GRAVITY SPRAY GUN + M&S CUP ø 1,0 108,00 W0SPG33AG13C GRAVITY SPRAY GUN + M&S CUP ø 1,3 108,00 W0SPG33AG15C GRAVITY SPRAY GUN + M&S CUP ø 1,5 108,00 W0SPG33AG18C GRAVITY SPRAY GUN + M&S CUP ø 1,8 108,00 W0SPG33AG20C GRAVITY SPRAY GUN + M&S CUP ø 2,0 108,00 AZ30 HTE GRAVITY SPRAY GUN + 600cc AKULON CUP & AIR FLOW CONTROL VALVE W0SPG34AG10C GRAVITY SPRAY GUN + AKULON CUP ø 1,0 108,00 W0SPG34AG13C GRAVITY SPRAY GUN + AKULON CUP ø 1,3 108,00 W0SPG34AG15C GRAVITY SPRAY GUN + AKULON CUP ø 1,5 108,00 W0SPG34AG18C GRAVITY SPRAY GUN + AKULON CUP ø 1,8 108,00 W0SPG34AG20C GRAVITY SPRAY GUN + AKULON CUP ø 2,0 108,00 AIR CAP SET W2CAP30AG10 AIR CAP SET ø 1,0 ref. part 1 23,00 W2CAP30AG13 AIR CAP SET ø 1,3 ref. part 1 23,00 W2CAP30AG15 AIR CAP SET ø 1,5 ref. part 1 23,00 W2CAP30AG18 AIR CAP SET ø 1,8 ref. part 1 23,00 W2CAP30AG20 AIR CAP SET ø 2,0 ref. part 1 23,00 FLUID NOZZLE + FLUID NEEDLE SET W2ADU10AG10 FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,20 W2ADU10AG13 FLUID NOZZLE + FLUID NEEDLE SET ø 1,3 ref. part ,20 W2ADU10AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,20 W2ADU10AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,20 W2ADU10AG20 FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,20 SPARES W2COM3023 NOZZLE HOLDER ref. part 2 5,65 W2COM4001 TRIGGER STUD ref. part 4 0,60 W2PAT40AG PATTERN ADJ. ref. part 5 7,29 W2SUB2060 COMPLETE AIR VALVE ref. part 7 11,84 W2SUB2058 AIR VALVE SET ref. part 7-2 5,37 W2COM6001 AIR VALVE SPRING ref. part 7-3 0,21 W2COM6048 AIR VALVE SPRING SEAT ref. part 7-4 1,16 W2SUB3042 FLUID ADJUSTMENT GUIDE ref. part 7-5 5,32 W2COM3011 NEEDLE PACKING NUT ref. part 13 0,89 W2COM5004 SCREW ref. part 14 0,12 W2COM6004 TRIGGER ref. part 15 2,73 W2COM3007 FLUID NEEDLE ADJ.KNOB ref. part 17 1,62 W2COM6002 NEEDLE SPRING ref. part 18 0,26 W2COM5014 THREADED BUSHING ref. part 19 1,39 W2SUB6024 AIR FLOW CONTROL VALVE ref. part 25 10,53 W2KIT12 PACKING SET ref. part C 4,21 W2KIT28 AIR CAP PACKING SET (5+5 pcs./1 pk.) ref. part D 5,42 W2KIT19 SPECIAL WRENCH 58,85 W2KIT26 SCREEN FILTER KIT for M&S Cup 120 Mesh (5 pcs./1 pk.) 6,50 600cc AKULON GRAVITY CUP W AKULON CUP 600cc ref. part 20 10,53 W2KIT07 NON DRIP SET (5 pcs./1 pk.) ref. part B 4,48 W2KIT06 PAINT FILTER SET 50 Mesh (5 pcs./1 pk.) ref. part E 13,92 Disposable gravity Mix & Spray cup spares are available on page 14 5
8 AZ40 HTE AV Air Nipple: Fluid Nipple: Model AZ40 HTE AV AZ40 HTE AV AZ40 HTE AV AZ40 HTE AV AZ40 HTE AV AZ40 HTE AV Gravity spray gun C Air flow control valve 25 Certifications 6 CERTIFICATE OF COMPLIANCE We certify that we have tested the Air Gunsa AZ 40 HTE Spray Gun in accordance with pren Method 2 - Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: WATERBASED B/CT 72,4% HS LACQUER (Clearcoat) 76,0% VHS PRIMER 93,2% Research and Operations Director Signed for MIRRC THATCHAM: Ken Roberts MOTOR INSURANCE REPAIR RESEARCH CENTRE Colthrop Way, Thatcham, Berkshire, RG19 4NR UK
9 AZ40 HTE AV cc Akulon cup USE: B E Code Description ref. AZ40 HTE AV GRAVITY SPRAY GUN + 600cc AKULON CUP & AIR FLOW CONTROL VALVE W0SPG42AG08C GRAVITY SPRAY GUN + AKULON CUP ø 0,8 87,00 W0SPG42AG10C GRAVITY SPRAY GUN + AKULON CUP ø 1,0 87,00 W0SPG42AG12C GRAVITY SPRAY GUN + AKULON CUP ø 1,2 87,00 W0SPG42AG15C GRAVITY SPRAY GUN + AKULON CUP ø 1,5 87,00 W0SPG42AG18C GRAVITY SPRAY GUN + AKULON CUP ø 1,8 87,00 W0SPG42AG20C GRAVITY SPRAY GUN + AKULON CUP ø 2,0 87,00 AZ40 HTE AV GRAVITY SPRAY GUN + 200cc AKULON CUP & AIR FLOW CONTROL VALVE W0SPG40AG08C GRAVITY SPRAY GUN + AKULON CUP ø 0,8 87,00 W0SPG40AG10C GRAVITY SPRAY GUN + AKULON CUP ø 1,0 87,00 W0SPG40AG12C GRAVITY SPRAY GUN + AKULON CUP ø 1,2 87,00 W0SPG40AG15C GRAVITY SPRAY GUN + AKULON CUP ø 1,5 87,00 W0SPG40AG18C GRAVITY SPRAY GUN + AKULON CUP ø 1,8 87,00 W0SPG40AG20C GRAVITY SPRAY GUN + AKULON CUP ø 2,0 87,00 AIR CAP SET W2CAP40AG08 AIR CAP SET ø 0,8 ref. part 1 19,80 W2CAP40AG10 AIR CAP SET ø 1,0 ref. part 1 19,80 W2CAP40AG12 AIR CAP SET ø 1,2 ref. part 1 19,80 W2CAP40AG15 AIR CAP SET ø 1,5 ref. part 1 19,80 W2CAP40AG18 AIR CAP SET ø 1,8 ref. part 1 19,80 W2CAP40AG20 AIR CAP SET ø 2,0 ref. part 1 19,80 FLUID NOZZLE + FLUID NEEDLE SET W2ADU40AG08 FLUID NOZZLE + FLUID NEEDLE SET ø 0,8 ref. part ,20 W2ADU40AG10 FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,20 W2ADU40AG12 FLUID NOZZLE + FLUID NEEDLE SET ø 1,2 ref. part ,20 W2ADU40AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,20 W2ADU40AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,20 W2ADU40AG20 FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,20 SPARES W4COM5003 THREADED BUSHING ref. part 3 1,40 W2COM4008 TRIGGER STUD ref. part 4 0,52 W2PAT40AG PATTERN ADJ. ref. part 5 7,29 W2SUB2060 COMPLETE AIR VALVE ref. part 7 11,84 W2SUB2058 AIR VALVE SET ref. part 7-2 5,37 W2COM6001 AIR VALVE SPRING ref. part 7-3 0,21 W2COM6048 AIR VALVE SPRING SEAT ref. part 7-4 1,16 W2SUB3042 FLUID ADJUSTMENT GUIDE ref. part 7-5 5,32 W2COM2006 NEEDLE PACKING ref. part 12 0,65 W2COM3011 NEEDLE PACKING NUT ref. part 13 0,89 W2COM5004 SCREW ref. part 14 0,12 W2COM6005 TRIGGER ref. part 15 2,73 W2COM3007 FLUID NEEDLE ADJ. KNOB ref. part 17 1,62 W2COM6002 NEEDLE SPRING ref. part 18 0,26 W2COM5000 AIR NIPPLE M ref. part 20 2,21 W2SUB6024 AIR FLOW CONTROL VALVE ref. part 25 10,53 W2KIT12 PACKING SET ref. part C 4,21 W2KIT08 SPECIAL WRENCH 26, cc AKULON GRAVITY CUP W0CUPAZ cc AKULON CUP ref. part 23 10,43 W2KIT07 NON DRIP SET (5 pcs./1 pk.) ref. part B 4,48 W2KIT06 PAINT FILTER SET 50 Mesh (5 pcs./1 pk.) ref. part E 13, cc AKULON GRAVITY CUP W AKULON CUP 600cc ref. part 23 10,53 W2KIT07 NON DRIP SET (5 pcs./1 pk.) ref. part B 4,48 W2KIT06 PAINT FILTER SET 50 Mesh (5 pcs./1 pk.) ref. part E 13,92 7
10 AZ10 HTE AV & AZ10 HTE SE C AZ10 HTE AV Air Nipple: Fluid Nipple: Model AZ10 HTE AZ10 HTE AZ10 HTE AZ10 HTE AZ10 HTE AZ10 HTE AZ10 HTE Suction spray gun Air flow control valve AZ10 HTE SE 23 PCL 10 B3 AZ10 HTE SE cup Certifications 8 CERTIFICATE OF COMPLIANCE We certify that we have tested the Air Gunsa AZ 10 HTE Spray Gun in accordance with pren Method 2 - Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: WATERBASED B/CT 79,8% HS LACQUER (Clearcoat) 76,4% VHS PRIMER 93,8% Research and Operations Director Signed for MIRRC THATCHAM: Ken Roberts MOTOR INSURANCE REPAIR RESEARCH CENTRE Colthrop Way, Thatcham, Berkshire, RG19 4NR U.K.
11 AZ10 HTE AV & AZ10 HTE SE 24 USE: AZ10 HTE SE Fluid Nipple Code Description ref. AZ10 HTE AV SUCTION SPRAY GUN + 1 Lt. ALUMINIUM PIN LOCK CUP & AIR FLOW CONTROL VALVE W0SPG10AG10C SUCTION SPRAY GUN ø 1,0 105,00 W0SPG10AG13C SUCTION SPRAY GUN ø 1,3 105,00 W0SPG10AG15C SUCTION SPRAY GUN ø 1,5 105,00 W0SPG10AG18C SUCTION SPRAY GUN ø 1,8 105,00 W0SPG10AG20C SUCTION SPRAY GUN ø 2,0 105,00 W0SPG10AG25C SUCTION SPRAY GUN ø 2,5 105,00 W0SPG10AG30C SUCTION SPRAY GUN ø 3,0 105,00 AZ10 HTE SE SUCTION SPRAY GUN + 1 Lt. ALUMINIUM LEVER LOCK CUP & AIR FLOW CONTROL VALVE W0SPG12AG10C SUCTION SPRAY GUN ø 1,0 142,00 W0SPG12AG13C SUCTION SPRAY GUN ø 1,3 142,00 W0SPG12AG15C SUCTION SPRAY GUN ø 1,5 142,00 W0SPG12AG18C SUCTION SPRAY GUN ø 1,8 142,00 W0SPG12AG20C SUCTION SPRAY GUN ø 2,0 142,00 W0SPG12AG25C SUCTION SPRAY GUN ø 2,5 142,00 W0SPG12AG30C SUCTION SPRAY GUN ø 3,0 142,00 AIR CAP SET W2SUB AIR CAP SET ø 1,0 ref. part 1 23,00 W2SUB AIR CAP SET ø 1,3 ref. part 1 23,00 W2SUB AIR CAP SET ø 1,5 ref. part 1 23,00 W2SUB AIR CAP SET ø 1,8 ref. part 1 23,00 W2SUB AIR CAP SET ø 2,0 ref. part 1 23,00 W2SUB AIR CAP SET ø 2,5 ref. part 1 23,00 W2SUB AIR CAP SET ø 3,0 ref. part 1 23,00 FLUID NOZZLE + FLUID NEEDLE SET W2ADU10AG10 FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,20 W2ADU10AG13 FLUID NOZZLE + FLUID NEEDLE SET ø 1,3 ref. part ,20 W2ADU10AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,20 W2ADU10AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,20 W2ADU10AG20 FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,20 W2ADU10AG25 FLUID NOZZLE + FLUID NEEDLE SET ø 2,5 ref. part ,20 W2ADU10AG30 FLUID NOZZLE + FLUID NEEDLE SET ø 3,0 ref. part ,20 SPARES W2COM3003 NOZZLE HOLDER ref. part 2 5,43 W2COM3011 NEEDLE PACKING NUT ref. part 4 0,89 W2COM4001 TRIGGER STUD ref. part 5 0,60 W2SUB2060 COMPLETE AIR VALVE ref. part 7 11,84 W2SUB2058 AIR VALVE SET ref. part 7-2 5,37 W2COM6001 AIR VALVE SPRING ref. part 7-3 0,21 W2COM6048 AIR VALVE SPRING SEAT ref. part 7-4 1,16 W2SUB3042 FLUID ADJUSTMENT GUIDE ref. part 7-5 5,32 W2PAT10AG PATTERN ADJ. ref. part 10 7,29 W2COM6002 NEEDLE SPRING ref. part 12 0,26 W2COM3007 FLUID NEEDLE ADJ. KNOB ref. part 13 1,62 W2COM6004 TRIGGER ref. part 17 2,73 W2COM5008 FLUID NIPPLE G 1/4-3/8 (AZ10 HTE SE) ref. part 24 1,52 W2SUB6024 AIR FLOW CONTROL VALVE (AZ10 HTE AV/ AZ10 HTE SE) ref. part 25 10,53 W2KIT10 PACKING SET (AZ 10 HTE AV) ref. part C 4,88 W2KIT12 PACKING SET(AZ10 HTE SE) ref. part C 4,21 W2KIT28 AIR CAP PACKING SET (5+5 pcs./1 pk.) ref. part D 5,42 W2KIT04 SPECIAL WRENCH 33,67 W2KIT01 PAINT FILTER SET (50 Mesh) (5 pcs./1 pk.) ref. part E 7,29 1 LITRE ALUMINIUM PIN LOCK CUP AZ10 HTE AV W0CUPAZ10 COMPLETE CUP SET ref. part 21 24,29 W2ASS1002 LID SET ref. part ,23 W2COM1000 CONTAINER 1 lt. ref. part ,92 W2COM5002 SUCTION TUBE ref. part ,48 W2KIT09 LID PACKING KIT IN POLYETHYLENE (10 pcs./1 pk.) 26,75 1 LITRE ALUMINIUM LEVER LOCK CUP AZ10 HTE SE PCL 10B 3 CUP SET ref. part 23 52, CONTAINER ref. part , NON DRIP SET (2 pcs./1 pk.) ref. part , LID PACKING SET (2 pcs./1 pk.) ref. part , PAINT FILTER 130 Mesh 1,11 9
12 AZ10 HTE SP AV & AZ10 HTE PC AZ10 HTE SP AV C Air flow control valve 25 AZ10 HTE SP AV Air Nipple: M Fluid Nipple: G3/8 M AZ10 HTE PC Air Nipple: Fluid Nipple: Model M M16x1 F Pressure model AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV AZ10 HTE SP AV Pressure model with pressure cup included AZ10 HTE PC ~400 AZ10 HTE PC ~400 AZ10 HTE PC ~400 AZ10 HTE PC ~400 PC 19 B Cup - AZ10 HTE PC Pressure spray gun AZ10 HTE PC Certifications AZ10 HTE PC (body) 10 CERTIFICATE OF COMPLIANCE We certify that we have tested the Air Gunsa AZ 10 HTE Spray Gun in accordance with pren Method 2 - Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: WATERBASED B/CT 79,8% HS LACQUER (Clearcoat) 76,4% VHS PRIMER 93,8% Research and Operations Director Signed for MIRRC THATCHAM: Ken Roberts MOTOR INSURANCE REPAIR RESEARCH CENTRE Colthrop Way, Thatcham, Berkshire, RG19 4NR U.K.
13 AZ10 HTE SP AV & AZ10 HTE PC Code Description ref. USE: AZ10 HTE SP AV PRESSURE SPRAY GUN + AIR FLOW CONTROL VALVE (-3/8 ) W0SPG16AG08C PRESSURE SPRAY GUN ø 0,8 G 1/4-3/8 91,00 W0SPG16AG10C PRESSURE SPRAY GUN ø 1,0 G 1/4-3/8 91,00 W0SPG16AG13C PRESSURE SPRAY GUN ø 1,3 G 1/4-3/8 91,00 W0SPG16AG15C PRESSURE SPRAY GUN ø 1,5 G 1/4-3/8 91,00 W0SPG16AG18C PRESSURE SPRAY GUN ø 1,8 G 1/4-3/8 91,00 W0SPG16AG20C PRESSURE SPRAY GUN ø 2,0 G 1/4-3/8 91,00 W0SPG16AG25C PRESSURE SPRAY GUN ø 2,5 G 1/4-3/8 91,00 AZ10 HTE PC SPRAY GUN FOR PRESSURE CUP PC19B W0SPG13AG15S SPRAY GUN FOR PRESSURE CUP PC19B ø 1,5 123,00 W0SPG13AG18S SPRAY GUN FOR PRESSURE CUP PC19B ø 1,8 123,00 W0SPG13AG20S SPRAY GUN FOR PRESSURE CUP PC19B ø 2,0 123,00 W0SPG13AG25S SPRAY GUN FOR PRESSURE CUP PC19B ø 2,5 123,00 AZ10 HTE PC SPRAY GUN WITH PRESSURE CUP PC19B W0SPG13AG15C SPRAY GUN WITH PRESSURE CUP PC19B ø 1,5 247,00 W0SPG13AG18C SPRAY GUN WITH PRESSURE CUP PC19B ø 1,8 247,00 W0SPG13AG20C SPRAY GUN WITH PRESSURE CUP PC19B ø 2,0 247,00 W0SPG13AG25C SPRAY GUN WITH PRESSURE CUP PC19B ø 2,5 247,00 AIR CAP SET W2SUB AIR CAP ø 0,8 ref. part 1 23,00 W2SUB AIR CAP ø 1,0 ref. part 1 23,00 W2SUB AIR CAP ø 1,3 ref. part 1 23,00 W2SUB AIR CAP ø 1,5 ref. part 1 23,00 W2SUB AIR CAP ø 1,8 ref. part 1 23,00 W2SUB AIR CAP ø 2,0 ref. part 1 23,00 W2SUB AIR CAP ø 2,5 ref. part 1 23,00 FLUID NOZZLE + FLUID NEEDLE SET W2ADU14AG08 FLUID NOZZLE + FLUID NEEDLE SET ø 0,8 ref. part ,00 W2ADU14AG10 FLUID NOZZLE + FLUID NEEDLE SET ø 1,0 ref. part ,00 W2ADU14AG13 FLUID NOZZLE + FLUID NEEDLE SET ø 1,3 ref. part ,00 W2ADU14AG15 FLUID NOZZLE + FLUID NEEDLE SET ø 1,5 ref. part ,00 W2ADU14AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,00 W2ADU14AG20 FLUID NOZZLE + FLUID NEEDLE SET ø 2,0 ref. part ,00 W2ADU14AG25 FLUID NOZZLE + FLUID NEEDLE SET ø 2,5 ref. part ,00 AIR CAP SET (only for AZ10 HTE SP W tungsten carbide version) W2SUB AIR CAP SET ø 2,5 ref. part 1 30,00 FLUID NOZZLE + FLUID NEEDLE SET (only for AZ10 HTE SP W tungsten carbide version) W2ADU18AG18 FLUID NOZZLE + FLUID NEEDLE SET ø 1,8 ref. part ,70 W2ADU18AG25 FLUID NOZZLE + FLUID NEEDLE SET ø 2,5 ref. part ,70 SPARES W2COM3003 NOZZLE HOLDER ref. part 2 5,43 W2COM2006 NEEDLE PACKING (AZ10 HTE SP/AV/PC) ref. part 3 0,65 W2COM3011 NEEDLE PACKING NUT ref. part 4 0,89 W2COM4001 TRIGGER STUD ref. part 5 0,60 W2SUB2060 COMPLETE AIR VALVE ref. part 7 11,84 W2SUB2058 AIR VALVE SET ref. part 7-2 5,37 W2COM6001 AIR VALVE SPRING ref. part 7-3 0,21 W2COM6048 AIR VALVE SPRING SEAT ref. part 7-4 1,16 W2SUB3042 FLUID ADJUSTMENT GUIDE ref. part 7-5 5,32 W2PAT10AG PATTERN ADJ. ref. part 10 7,29 W2COM6002 NEEDLE SPRING ref. part 12 0,26 W2COM3007 FLUID NEEDLE ADJ. KNOB ref. part 13 1,62 W2COM6004 TRIGGER ref. part 17 2,73 W2COM5000 AIR NIPPLE M (AZ10 HTE SP W) ref. part 20 2,21 W2COM5008 FLUID NIPPLE G 1/4-3/8 (AZ10 HTE SP AV) ref. part 24 1,52 W2COM5013 FLUID NIPPLE G 1/4-1/4 (AZ10 HTE SP AV) ref. part 24 1,52 W2SUB6024 AIR FLOW CONTROL VALVE (AZ10 HTE SP AV/PC/SP W) ref. part 25 10,53 W2KIT12 PACKING SET (AZ10 HTE SP AV/AZ10 HTE PC) ref. part C 4,21 W2KIT28 AIR CAP PACKING SET (5+5 pcs./1 pk.) ref. part D 5,42 W2KIT18 SPECIAL NEEDLE PACKING SET (Tungsten Carbide) (10 pcs./1 pk.) ref. part F 2,08 W2KIT04 SPECIAL WRENCH 33,67 PC 19B 1 Lt. PRESSURE CUP PRESSURE CUP PC 19B 1 litre G 3/8 (PF 3/8 ) 138, LID PACKING PC 19B 16,49 11
14 AZ5 Air Nipple: Fluid Nipple: Model G1/8 AZ AZ AZ AZ Round pattern spray gun E Adapting nipple F Certifications A 200 cc Gravity Cup with non drip 12
GUN CASE for AZ3 HTE 2 14 MULTIPLE GUN CASE 14 Impact controller, Swivel quick coupling, Universal wrench 15 Supports for gravity guns
ontents Products Models Pages manual spray guns: AZ3 HTE2/AZ3 HTE2 AV/AZ3 HTE2 P AV/AZ3 HTE2 HVLP gravity feed 2 AZ30 HTE gravity feed 4 AZ40 HTE AV gravity feed 6 AZ10 HTE AV & AZ10 HTE SE suction feed
More informationBINKS TROPHY AIR SPRAY GUN
BINKS TROPHY AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
More informationGRACO AIRPRO AIR SPRAY GUN
GRACO AIRPRO AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
More informationMaxiMist SprayMate Pro HVLP TANNING SYSTEM
MaxiMist SprayMate Pro HVLP TANNING SYSTEM DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please read these instructions carefully and keep for
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More information3M Spray Equipment Products Automotive Refinish Applications. Effective, Efficient. Economical
3M Spray Equipment Products Automotive Refinish Applications Effective, Efficient Economical Key Benefits of using the 3M PPS Paint Preparation System Only one PPS cup for mixing and spraying Enables painters
More informationDiesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
More informationMODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
More informationMAXIMIST ULTRA PREMIER HVLP SPRAY TANNING SYSTEM
MAXIMIST ULTRA PREMIER HVLP SPRAY TANNING SYSTEM DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please read these instructions carefully and keep
More informationMAXIMIST ULTRA PRO HVLP SPRAY TANNING SYSTEM
MAXIMIST ULTRA PRO HVLP SPRAY TANNING SYSTEM DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please read these instructions carefully and keep
More informationMaxiMist Pro Series Spray Gun
MaxiMist Pro Series Spray Gun Your purchase includes the MaxiMist Pro Series Spray Gun Please read these instructions carefully and keep for your reference. Refer to the included instruction manual as
More informationMulti talented! "THE NEW GENERATION" SATAjet the versatile spray gun series. SATAjet 1000: Allround paint spray guns for craft and industry
SATAjet 1000 - the versatile spray gun series Multi talented! SATAjet 1000: Allround paint spray guns for craft and industry High speed application Fine atomisation Optimum finish results in all fields
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationSATAminijet 4400 B. Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories. For high precision work
SATAminijet 4400 B Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories For high precision work SATAminijet 4400 B Brilliance in Miniature The SATAminijet 4400 B is the perfect
More informationMAXIMIST HVLP TANNING SYSTEM
L0941 12 10:Layout 1 16/12/10 09:03 Page 1 MAXIMIST HVLP TANNING SYSTEM DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please read these instructions
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationXtreme. Premium Refinishing. Same body, different aircaps. Revolutionary air distribution system. Perfect mechanisation without joints
CATALOGUE Premium Refinishing Same body, different aircaps New High-end Aluminium Aircaps for MS, HS, Waterborne and HVLP. Revolutionary air distribution system Carried out at the tip of the air cap, it
More informationMakes it easy! prayvantage Pro eries Superior, Economical Spray Finishing for Professional Painters, Contractors & Do-it-Yourselfers
Makes it easy! prayvantage Pro eries Superior, Economical Spray Finishing for Professional Painters, Contractors & Do-it-Yourselfers A98-145 I 1/2009 Why Choose B inks1 Binks pioneered the development
More informationINSTRUCTION MANUAL DO NOT USE SPRAY GUN BEFORE READING THIS MANUAL
INSTRUCTION MANUAL DO NOT USE SPRAY GUN BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please read these instructions carefully and keep for your reference. 2013 Apollo
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationMADE IN SPAIN PROFESSIONAL EQUIPMENT CAR REFINISHING
MADE IN PROFESSIONAL EQUIPMENT CAR REFINISHING XTREME FINISHES MADE IN THE LASTEST TECHNOLOGY Smaller, lighter and more ergonomic! GARANTÍA AÑOS Standard version Improved GRAVITY point. more ergonomic
More informationHIGH VOLUME LOW PRESSURE COMPRESSED AIR SPRAY GUNS
INSTRUCTION MANUAL (For Professional Use Only) HIGH VOLUME LOW PRESSURE COMPRESSED AIR SPRAY GUNS DO NOT USE SPRAY GUNS BEFORE READING THIS MANUAL 8000 8200 8400 This manual contains important warnings
More informationSATAjet 5000 B. Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories. As versatile as you
SATAjet 5000 B Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories As versatile as you Supreme flexibility The SATAjet 5000 B The premium spray gun SATAjet 5000 B sets new quality
More informationSprayVantage Pro Series
SprayVantage Pro Series Superior, Economical Spray Finishing for Professional Painters, Contractors & Do-it-Yourselfers www.binks.com A98-145R2 02/13 Why Choose Binks? Binks pioneered the development of
More informationEcco Airless Paint Spraying Equipment - for applying thick coats to large areas
Ecco Airless Paint Spraying Equipment - for applying thick coats to large areas Index What is Airless Spray Painting? 3 Manual and automatic spray guns 4-5 Accessories for spray guns 6-7 Airless hoses
More informationSATAjet 4000 B. Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories. Made for the Best
SATAjet 4000 B Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories Made for the Best The Experience in Form and Function The SATAjet 4000 B The new SATAjet 4000 B is setting
More informationAccessories for high-pressure cleaners
Accessories for high-pressure cleaners Practical and diverse Accessories for high-pressure cleaners 70 Effective cleaning without splashing water Floor cleaner Round Cleaner UFO short Ø 300 mm Round Cleaner
More informationCOMPANY PROFILE. Leading manufacturer in the field of surface engineering. Spray Painting Technology I Pumps I Compressors I Systems Engineering
COMPANY PROFILE Leading manufacturer in the field of surface engineering Spray Painting Technology I Pumps I Compressors I Systems Engineering COMPANY PROFILE CONTENT 1 INTRODUCTION SHORT OVERVIEW WHAT
More informationAccessories for high-pressure cleaners
Accessories for high-pressure cleaners Practical and diverse Accessories for high-pressure cleaners 62 Effective cleaning without splashing water Floor cleaner Round Cleaner UFO short Ø 300 mm Round Cleaner
More informationOperating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
More information>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
More informationHP Epoxy Primer P
Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy
More informationProduct Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER
More informationMain Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationMIG/MAG Fume Extraction Torch RAB Plus 240 D liquid-cooled. New, lighter, more flexible... BINZEL. The right welding torch for every job!
MIG/MAG Fume Extraction Torch RAB Plus 240 D liquid-cooled New, lighter, more flexible... C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid-cooled
More informationBinks Spray Gun Extensions
Binks Spray Gun Extensions Use genuine Binks Spray Gun Extensions for conventional, HVLP, airless and specialty applications EA52-100 EXTENSION INDEX Extension Type Use Page Conventional Circular Spray
More informationTRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS
CATALOGUE 2018 TRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS DESIGN AND CONSTRUCTION ON DEMAND CHANGES AND ADAPTATION 2 METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490
More informationred rooster 2TE Air Trolley (2TE/AT/4) 2TE Air Hoist DESCRIPTION 3 1 DRG TCR 2000C2 2TE Hoist and Trolley 17/07/ kg
ITEMQTYPART NUMBER DRG 5- TCR C 3 DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) TE Air Top Eye TE and Trolley 7/7/3-65kg Title of project Material Weight REV. Designed by Checked by Approved by B. Aitken
More informationProduct Data Sheet November 2016
Product Data Sheet November 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY T8500V HP Chromate Free Epoxy Primer P580-3501/-3502/-3503/-3504 Product Description P580-3501 HP Chromate Free Epoxy Primer
More informationGATOR Battery-powered In-line Tools
SERVICE MANUAL (EK10L shown) GATOR Battery-powered In-line Tools Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
More information21 PC PAINT SPRAY GUN KIT Model 90985
21 PC PAINT SPRAY GUN KIT Model 90985 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight
More informationOptimum cleaning and maintenance
Practical Guide: Spray Gun Maintenance Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories Optimum cleaning and maintenance Methods of professional spray gun cleaning In general:
More informationHP Chromate Free Epoxy Primer P /-4505/-4510
Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free
More informationUniversal Pipe Cutter (UPC) Replacement Parts Booklet
Universal Pipe Cutter Universal Pipe Cutter (UPC) Booklet Table of Contents Drawing Number U U U U U U U U8 U9 U0 U Description UPC Front View UPC Pneumatic Rear View UPC Hydraulic Rear View UPC Mainframe
More informationSPRAY GUN. MODEL NO: TG2 PART No: OPERATION & MAINTENANCE INSTRUCTIONS
SPRAY GUN MODEL NO: TG2 PART No: 3090070 OPERATION & MAINTENANCE INSTRUCTIONS 0803 - 1 - - 14 - NOTES Please read these instructions carefully before operating the tool Thank you for purchasing this CLARKE
More informationMIG/MAG Welding Torch ABIMIG 645 W liquid-cooled
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL air cooled welding torches incorporate
More informationTHE COMPLETE PAINT SPRAYING SYSTEM
L0199 09-04.qxd 14/2/05 10:13 am Page 1 THE COMPLETE PAINT SPRAYING SYSTEM OPERATING INSTRUCTIONS Thank you for purchasing the Earlex HVLP Spray Kit. This is a highly versatile spray kit and can be used
More informationSERVICE I IPL, Service Tools, Service Tools
SERVICE I0300046 IPL, Service Tools, 2003-01 Service Tools 1 1 Contents Service s A. Hands, general purpose B. Pressure testing s C. Ignition system D. Carburettor, fuel pump E. Starter device F. Clutch,
More informationHANDHOLE SEAT GRINDER
1041-1601 HANDHOLE SEAT GRINDER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, 9/17/2007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas C. Wilson,
More informationPharma Temperature Sensor TFP-EX
SENSORS FOR AND BIO. Product Information TFP-EX Pharma Temperature Sensor TFP-EX Application/Specified Usage Temperature measurement: of liquid media in vessels and pipes suitable for applications in potentially
More informationred rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG
ITEM QTY PART NUMBER DRG 5- TCR DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) Air TCR5 / TCR Link Plate TE and Trolley 6/6/ - 6kg Title of project Material Weight REV. Designed by Checked by Approved by B.
More informationGen2O - Environmentally Friendly
Waterborne Automotive Basecoat: Go for Gen2O and build a future for your business that makes cents. Gen2O is user friendly and cost effective. The transition from conventional to Gen2O is easy. Only minor
More information34 o Clipped Head Air Frame Nailer
34 o Clipped Head Air Frame Nailer MODEL: CFN34 Part No. 3110397 OPERATING & MAINTENANCE INSTRUCTIONS 1207 SPECIFICATIONS Min. Hose Size (ID)... 6 mm (1/4 ) Ave. Air Consumption... 14.8 cfm Operating Pressure...
More informationVolume Solids % Weight Solids %
Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane
More informationTROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
More informationINSTRUCTION MANUAL DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL
INSTRUCTION MANUAL DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please read these instructions carefully and keep for your reference. 2013 Apollo
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationRe: Request to use EPA approved non-hvlp spray gun. Dear Mr. Asral:
Mr. Ky Asral Supervising Environmental Engineer New Jersey Department of Environmental Protection Small Business Assistance Program PO Box 423 Trenton, NJ 08625-0423 Re: Request to use EPA approved non-hvlp
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
More information12. Mechanical Drawings & Parts Breakdown List
12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part #
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10 TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly......
More informationProduct Data Sheet March 2015
Product Data Sheet March 2015 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY 2K HS Plus Express Clearcoat P190-6659 Product Product Description P190-6659 is a fast drying high solids 2-pack express clearcoat.
More information>> ACCESSORIES 5 2 METALPLAST-SOPRANA
1 CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE
More informationPrinted from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1111 020 2116 1 Crankcase 2-7 2 9371 470 3120 2 Cylindrical pin 6x20 3 9022 341 1010 10
More informationHolesaw Morse 19mm Holesaw Morse 24mm Holesaw Morse 30mm Holesaw Morse 38mm
Holesaw Morse 19mm 7002-206 Holesaw Morse 24mm 7002-065 Holesaw Morse 30mm 7002-066 Holesaw Morse 38mm 7002-067 Holesaw Morse 38mm - Drilled for Holesaw Taps 7002-067DR Holesaw Morse 44mm 7002-068 Holesaw
More informationWESTERN STYLE STEEL. LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket
LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket 2" WBLCR200 3.00 lbs $ 29.48 3" WBLCR300 4.50 25.22 4" WBLCR400 6.00 41.85 *1" Outlet Standard, 3 4 " Available upon
More informationINSTRUCTION MANUAL T100 MINI-MIST DELUXE TANNING SYSTEM. (Not Suitable for Continuous Use)
INSTRUCTION MANUAL T100 MINI-MIST DELUXE TANNING SYSTEM (Not Suitable for Continuous Use) DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please
More informationMIG/MAG Welding Torch MB 26 KD air-cooled
MIG/MAG Welding Torch MB 26 KD air-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL air cooled welding torches incorporate the high quality
More informationCoolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More information308940J INSTRUCTIONS-PARTS LIST. Kit, Beads Dispenser WARNING. Pressure Relief Procedure ENG GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN
INSTRUCTIONS-PARTS LIST Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Kit, Beads Dispenser 3300 psi (230 bar, 23 MPa ) Maximum Working Pressure
More informationResistance Thermometers Model Series TR7X0, Sheathed Design
Electrical Temperature Measurement Resistance Thermometers Model Series TR7X0, Sheathed Design WIKA Data Sheet TE 60.40 Applications T Suitable for all industrial and laboratory applications Special Features
More informationElectrical Temperature Measurement
Electrical Temperature Measurement Resistance Thermometers Model TR10-B, for Additional Thermowell Applications Machinery, plant and tank construction Energy and power plant technology Chemical industry
More informationJARVIS. Model Brisket Scissor EQUIPMENT... TABLE OF
Model 423-17 Brisket Scissor EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page Model 423--17... 4037003 Air Filter / Regulator / Lubricator 3022003 Air Hose Assembly... 3059018 Balancer...
More informationUHS Duralit Extra Tinters series 150
2K ACRYLIC FINISH 2:1 UHS Duralit Extra, is a 2K Acrylic Topcoat enamel for direct gloss solid colours. It has been developed for use where product VOC is restricted. UHS Duralit Extra provides maximum
More informationNEWLONG. r PORTABLE FILLED BAG CLOSING MACHINE NEWLONG MACHINE WORKS, LTD.
NEWLONG r PORTABLE FILLED BAG CLOSING MACHINE * NEWLONG MACHINE WORKS, LTD. () THREAD TENSION AND COVER PARTS 0 () THREAD TENSION AND COVER PARTS Ref. No. Part No. Description Q ty Remarks 5 6 7 8 9 0
More informationA GUIDE TO BETTER SPRAYING
A GUIDE TO BETTER SPRAYING Always spray at the lowest possible pressure which will give a good spray pattern but which does not create tramlines. Excessive pressure is often used in the mistaken belief
More informationPARTS LIST. Model MFT-HD Cleco
PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter
More informationLockformer / 16 Gauge Speednotch
Lockformer / 16 Gauge Speednotch INSTALLATION PRELIMINARY: After uncrating, locate unit, with or without base skid, to area of operation. Unbind foot switch cord and cylinder hoses and remove gauge pin
More informationOperator s Manual. PP022 Passive Probe
Operator s Manual PP022 Passive Probe 700 Chestnut Ridge Road Chestnut Ridge, NY, 10977-6499 Tel: (845) 425-2000, Fax: (845) 578 5985 teledynelecroy.com PP022 Passive Probe Instruction Manual 2017 Teledyne
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationMaster-Feeder-System MFS V2
T E C H N O L O g y F O R T H E W E L d E R S W O R L d. Master-Feeder-System MFS V2 High precision... Constant & precise! MFS V2 the wire feeder system for highly automated laser welding and brazing equipment.
More information- 4 - Fig. 3b. Fig. 1b. Fig. 2. Fig. 2b MT 300
MP 00 Manual 1 7 6 9 8 5 1 1 10 11 1 Fig. 1a Fig. 1b MT 00 Breite Buche Erle Pappel Balsa 0 0,5 0,8 0,8 0,8 max. Zustellung mm 0 0, 0,6 0,8 0,8 60 0, 0, 0, 0,8 80 0,1 0,1 0, 0,6 n Messerwelle = 6.000/min
More informationEN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D
HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating
More informationMIG/MAG Welding Torch System ROBO WH 455 D ROBO WHPP 455 D liquid cooled
MIG/MAG Welding Torch System ROBO WH 455 D ROBO WHPP 455 D liquid cooled C E R T I F DIN EN ISO 9001 Q M - S I Y E T S D E M BINZEL. The right welding torch for every job. The welding torches belonging
More informationOperating Manual * * Differential pressure transmitter. Table of Contents. 1 Safety guidelines. 1.1 General Information
*09005137* BA_EN_DE50 Rev.A 11/12 *09005137* d e v e l o p i n g s o l u t i o n s DE50 Operating Manual Differential pressure transmitter Table of Contents 1 Safety guidelines 2 Application purpose 3
More informationSignature. Date. Surname. 30 max.
ITEM QTY PART NUMBER DRG - DRG - DRG - DRG 9- TCR DESCRIPTION Trolley Low Headroom Frame TCR / TCR Link Plate Spacer Air Hoist Title of project Date Material Weight Designed by Approved by Surname Date
More informationSPRAY GUN MODEL NO: AP17 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: GC0813
SPRAY GUN MODEL NO: AP17 PART NO: 3082100 OPERATION & MAINTENANCE INSTRUCTIONS GC0813 INTRODUCTION Thank you for purchasing this CLARKE Spray Gun. Before attempting to use this product, please read this
More informationExploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
More informationFrom the library of: Superior Sewing Machine & Supply LLC
I TER 1 1 Yamajin Bldg., 18, 1-chome, Hon-machi, Higashi-ku, Osaka 541, Japan P.O.Box: Osaka Higashi No. 509 Telephone: Osaka 261-3291 N3297 (7 Lines) Cable Address: "CONSEWMACH" Osaka Telex: J64459 CONSEW
More informationLPK1550 Hydraulic Crimping Tool 15-ton
SERVICE MANUAL LPK1550 Hydraulic Crimping Tool 15-ton Serial Code FYF Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More information15T Hoist and Trolley TMH15000/5 AT15S DRG /02/ ,50 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT28 REV0.
REVISION HISTORY REV. DATE APPROVED D-AHT REV Part Number DRG Title of Part Title of Project Scale not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More informationS E L E C T I O N. Arm Curl. User manual
S E L E C T I O N T H E S T R E N G T H E V O L U T I O N User manual The identification plate of the and manufacturer, affixed behind the seat, gives the following details: A Name and address of the manufacturer
More informationItem #16287 CONCOURS 2 PAINT GUN & ACCESSORY KIT INSTRUCTIONS
Item #16287 CONCOURS 2 PAINT GUN & ACCESSORY KIT INSTRUCTIONS The Eastwood Concours 2 HVLP Paint Gun is a precision engineered gun designed for use by the seasoned professional or hobbyist. It is capable
More informationGENERAL ASSEMBLY TCR 2000/2 1:4 DRG 1368D 10 25/01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 7.5 kg D01-AH6 REV0 REV.
REVISION HISTORY REV. DATE APPROVED 0 Part Number DRG 1368D 10 Title of Part GENERAL ASSEMBLY 1:4 Scale Designed By Drawn By Checked By Approved By Surname Adam Migala E. Crichton B. Aitken Title of Project
More informationEARLEX SPRAY STATION 6900
HV6900 UK NO226 01-09 New-Style:Layout 2 15/1/09 10:15 Page 1 EARLEX SPRAY STATION 6900 OPERATING INSTRUCTION MANUAL Thank you for purchasing the Professional Earlex low pressure paint system. This highly
More information