EITG05 Digital Communications
|
|
- Priscilla Bailey
- 5 years ago
- Views:
Transcription
1 Fourier transform EITG05 Digital Communications Lecture 4 Bandwidth of Transmitted Signals Michael Lentmaier Thursday, September 3, 08 X(f )F{x(t)} x(t) e jπ ft dt X Re (f )+jx Im (f ) X(f ) e jϕ(f ) x(t)f {X(f )} X(f ) e +jπ ft df X(f ) e +j(π ft+ϕ(f )) df Some useful Fourier transform properties g(at) a G(f/a) g( t) G( f) G(t) g( f) g(t t 0 ) G(f)e jπft0 g(t)e jπfct G(f f c ) d g(t) dt jπf G(f) g (t) G ( f) g (T t) G (f)e jπft δ(t) full list in Appendix C of the compendium (dc) δ(f) e jπfct δ(f f c ) cos(πf c t) (δ(f + f c)+δ(f f c )) sin(πf c t) j (δ(f + f c) δ(f f c )) αe πα t e πf /α Some useful Fourier transform properties Consider two signals x(t) and y(t) and their Fourier transforms x(t) X(f ), y(t) Y(f ) Recall the convolution operation z(t) x(t) y(t): x(t) A t τ z(t) AB τ τ y(t) B z(t) x(t) y(t) + t 0τ τ t 0τ y(ν) x(t ν) dν Filtering: x(t) y(t) X(f ) Y(f ) Multiplication: x(t) y(t) X(f ) Y(f )
2 Spectrum of time-limited signals Consider some time-limited signal s T (t) of duration T, with s T (t)0 for t < 0 and t > T Assume that within the interval 0 t T, the signal s T (t) is equal to some signal s(t), i.e., s T (t)s(t) g rec (t), where g rec (t) is the rectangular pulse of amplitude A Taking the Fourier transform on both sides we get S T (f )S(f ) G rec (f )S(f ) AT sin(π ft) π ft jπ ft e Since G rec (f ) is unlimited along the frequency axis, this is the case for S T (f ) as well (convolution increases length) Time-limited signals can never be strictly band-limited Some definitions of bandwidth Main-lobe definition: W lobe is defined by the width of the main-lobe of R(f ) This is how we have defined bandwidth in previous examples In baseband we use the one-sided width, while in bandpass applications the two-sided width is used (positive frequencies) Percentage definition: W 99 is defined according to the location of 99% of the power For bandpass signals W 99 is found as the value that satisfies fc +W 99 / f c W 99 / R(f )df R(f )df Other percentages can be used as well: W 90, W 99.9 Nyquist bandwidth Assuming an ideal pulse with finite bandwidth (see Chapter 6) W nyq R s [Hz] Some definitions of bandwidth Pulse spectrum examples Pulse shape W lobe %power W 90 W 99 W 99.9 Asymptotic in W lobe decay rec /T /T 0.6/T 04/T f tri 4/T /T.60/T 6.4/T f 4 hcs 3/T /T.36/T 5.48/T f 4 rc 4/T /T.8/T 3.46/T f 6 Nyquist R s R s 0.99R s 0.999R s ideal Table.: Double-sided bandwidth results for power spectral densities according to (.). The g rec (t), g tri (t), g hcs (t) andg rc (t) pulse shapes are defined in Appendix D, and T denotes the duration of the pulse. The Nyquist pulse shape is not limited in time and it is defined in (D.49) with parameters β 0and T. G(f) EgT in db: rec, hcs, and rc pulse ft This table is useful for PAM, PSK, and QAM constellations Except bandwidth W, the asymptotic decay is also relevant ( ) Figure.9: 0 log G(f) 0 E gt for the g rec (t), g hcs (t), and g rc (t) pulse shapes. See also Example.6.
3 From last lecture: R(f ) for Binary Signaling In the general binary case, i.e., M, wehave A(f )P 0 S 0 (f )+P S (f ) This simplifies the expression for the power spectral density to R(f )R c (f ) + R d (f ) P 0P S 0 (f ) S (f ) + P 0 S 0 (f )+P S (f ) T b Tb δ(f n/t b ) n (derivation in Ex..0) We will now consider some examples from the compendium Example. Assume equally likely antipodal signal alternatives, such that s (t) s 0(t) g(t) where g(t) g rec(t), and g rec(t) is given in (D.). Assume also that T T b. i) Calculate the power spectral density R(f). ii) Calculate the bandwidth W defined as the one-sided width of the mainlobe of R(f ), if the information bit rate is 0 [kbps], and if T T b/. Calculate also the bandwidth efficiency ρ. iii) Estimate the attenuation in db of the first sidelobe of R(f) compared to R(0). M with equally likely antipodal signaling s (t) s 0 (t)g(t) With P 0 P / and S (f ) S 0 (f )G(f ) we get R(f )R b S (f ) R b S 0 (f ) R b G(f ) Details for the pulse in Appendix D Example.3 Assume equally likely antipodal signal alternatives below. Assume that s (t) s 0(t) g rc(t), where the time raised cosine pulse g rc(t) is defined in (D.8). Assume also that T T b. Find an expression for the power spectral density R(f). Calculate the bandwidth W, defined as the one-sided width of the mainlobe of R(f), ifr b is 0 [kbps]. Calculate also the bandwidth efficiency ρ. Same as Example., but with g rc (t) pulse Analogously we get R(f )R b G rc (f ) From the one-sided main-lobe we get W /T [Hz] Bandwidth efficiency ρ / [bps/hz] is the same (why?) Example.4 Assume P 0 P and that, s (t) s 0(t) g rc(t)cos(πf ct) with T T b, and f c /T. Hence, a version of binary PSK signaling is considered here (alternatively binary antipodal bandpass PAM). Calculate the bandwidth W, defined as the double-sided width of the mainlobe around the carrier frequency f c. Assume that the information bit rate is 0 [kbps]. Calculate also the bandwidth This corresponds to the bandpass case Let g hf (t) denote the high-frequency pulse g hf (t)g rc (t)cos(π f c t) and R(f )R b G hf (f ) Using shift operations we get G rc (f + f c ) R(f )R b + G rc(f f c ) From the two-sided main-lobe we get W 4/T [Hz]
4 Example: discrete frequencies in R(f ) Assume M Let s 0 (t)0 and s (t)5 with a pulse duration T T b / With this the average signal becomes a(t) s 0(t)+s (t).5, 0 t T We can then write (within the pulse duration T) s 0 (t).5 + a(t), s (t)+.5 + a(t) Observe:. this method is a waste of signal energy since a(t) does not carry any information. repetition of a(t) in every symbol interval creates some periodic signal component in the time domain, which leads to discrete frequencies in the frequency domain From last lecture: general R(f ) The power spectral density R(f ) can be divided into a continuous part R c (f ) and a discrete part R d (f ) R(f )R c (f )+R d (f ) The general expression for the continuous part is R c (f ) M P n S n (f ) A(f ) ( n0 For the discrete part we have R d (f ) ) M P n S n (f ) A(f ) n0 A(f ) T s δ(f n/ ) n R(f ): M-ary PAM signals With M-ary PAM signaling we have s l A l g(t), l 0,,...,M Then M S l (f )A l G(f ), and A(f ) l0 With this we obtain the simplified expression R(f ) σ A G(f ) + m A T s G(f ) n P l A l G(f ) δ(f n/ ), where m A denotes the mean and σa E s/e g m A the variance of the amplitudes A l Assuming zero average amplitude m A 0 and using P σa E g R s this reduces to R(f )R c (f ) σ A G(f ) P E g G(f ) Example.8 Assume the bit rate R b 9600 [bps], M-ary PAM transmission and that m A 0. Determine the (baseband) bandwidth W, defined as the one-sided width of the mainlobe of the power spectral density R(f), ifm, M 4and M 8, respectively. Furthermore, assume a rectangular pulse shape with amplitude A g, and duration T. Calculate also the bandwidth efficiency ρ. What is W for a given pulse shape and different M? Using T, m A 0 and g(t)g rec (t), wehave R(f ) σ A G rec (f ) For the given pulse we get W /, where kt b k M W 9600[Hz] k M 4 W 4800[Hz] k 3 M 8 W 300[Hz] Bandwidth efficiency: ρ R b /W kt b /T b k
5 What does bandwidth efficiency tell us? In the previous example we had a bandwidth efficiency of ρ R b W k Saving bandwidth The previous example showed that the bandwidth W can be reduced by increasing M T kt b increases with M W /T R b /k decreases accordingly Improving bit rate Assume instead that the bandwidth W is fixed in the same example, i.e., the symbol duration T is fixed Then R b kw increases with M Assume for example W MHz: R b Mbps if M (k ) R b 0Mbps if M 04 (k 0) R(f ): M-ary QAM signals With M-ary QAM signaling the signal alternatives are s l (t)a l g(t) cos(π f c t) B l g(t) sin(π f c t), l 0,,...,M Then the Fourier transform becomes G(f + f c )+G(f f c ) G(f + f c ) G(f f c ) S l (f )A l jb l (A l jb l ) G(f + f c) +(A l + jb l ) G(f f c) Assuming a zero average signal a(t)0 and f c T this simplifies to R(f )R c (f )P G(f + f c) + G(f f c ) E g R(f ): M-ary QAM signals Remember that M-ary QAM signals contain M-ary PSK and M-ary bandpass PAM signals as special cases: BP-PAM: B l 0 PSK: A l cos(ν l ), B l sin(ν l ) our results for R(f ) of M-ary QAM signals include these cases For symmetric constellations, such that a(t)0, the simplified version applies The bandwidth W is determined by G(f f c ) and hence the two-sided main-lobe of G(f ) if the same pulse g(t) is used then M-ary QAM, M-ary bandpass PAM and M-ary PSK have the same bandwidth W Example Bandwidth consumption for BPSK, QPSK and 6-QAM assuming equal R b and f c 00R b RbR(f)/ P in db: M-ary QAM and ghcs(t) f/r b Figure.0: The power spectral density for binary QAM (BPSK, widest mainlobe), 4-ary QAM (QPSK), and 6-ary QAM (smallest mainlobe). The figure shows 0 log 0 (R b R(f)/ P ) [db] in the frequency interval 98R b f 0R b. The carrier frequency is f c 00R b [Hz], and a kt b long g hcs (t) pulse is assumed. See also (.7) and (.30).
6 R(f ): M-ary FSK signals With M-ary frequency shift keying (FSK) signaling the signal alternatives are s l (t)a cos(π f l t + ν), Choosing ν π/ this can be written as 0 t s l (t)g rec (t) sin(π f l t), with T, since s l (t)0 outside the symbol interval The Fourier transform is then S l (f )j G rec(f + f l ) G rec (f f l ) The exact power spectral density R(f ) can now be computed by the general formula (.0) (.04) R(f ): M-ary FSK signals Let us find an approximate expression for the FSK bandwidth W Assume that f l f 0 + l f, l 0,...,M Then the bandwidth W can be approximated by W R s + f M f 0 + R s (M )f + R s Consider now orthogonal FSK with f I R s / for some I > 0 The bandwidth efficiency is then ρ R b W R b (M )f + R s R b ( (M )I/ + ) Rs log M (M )I/ + Observe: the bandwidth efficiency of orthogonal M-ary FSK gets small if M is large Last week we saw: M-ary FSK has good energy and Euclidean distance properties trade-off Example.36 Assume that orthogonal M-ary FSK is used to communicate digital information in the frequency band. f. [MHz]. For each M below, find the largest bit rate that can be used (use bandwidth approximations): i) M ii) M 4 iii) M 8 iv) M 6 v) M 3 Which of the M-values above give a higher bit rate than the M case? Solution: It is given that W M FSK 00 [khz]. From (.45), the largest bit rate is obtained with I : R b 0 5 log (M) (M )/ + R(f ): OFDM-type signals An OFDM symbol (signal alternative) x(t) can be modeled as a superposition of N orthogonal QAM signals, each carrying k n bits, that are transmitted at different frequencies (sub-carriers) N x(t) s n,qam (t) n0 Assuming each QAM signal has zero mean and that the different carriers have independent bit streams we get M log (M) (M )/+ 5/ R b kbps kbps 7/ kbps / kbps 9/ kbps 35/ 35 From this table it is seen that M 4, 8, 6 give a higher bit rate than M. R(f )R c (f )R s E{ X(f ) N } R n (f ) n0 Using our previous results for QAM in each sub-carrier we get N R(f )R c (f ) n0 P G(f + f c) + G(f f c ) E g
7 R(f ): OFDM-type signals Illustration of R n (f ) contributed by three neighboring sub-carriers: Subchannel contributions ft Assuming f n f 0 + n/( h ) we can estimate the bandwidth as W (N + )f N + R s N R s, N, h h / The bandwidth efficiency is then approximated by ρ R b W R N s W k n k0 N N k0 k n [bps/hz] Example: R(f ) for OFDM R(f)/ PT in db: OFDM with N 6 ft N 6 sub-carriers T 0. [ms] f R s / [khz] W R s 79 [khz] R(f)/ PT for OFDM with N ft Example.35 ADSL: uses plain telephone cable (twisted pair, copper) Power spectral density POTS: telephony, modem, FAX ADSL uplink kbps ADSL downlink Mbps f [khz] In ADSL, a coded OFDM technique is used. The level of the power spectral density in the downstream is roughly -73 db. As a basic example, let us here assume that the OFDM symbol rate in the downlink is 4000 [symbol/s], and that the subchannel carrier spacing is 5 khz. Furthermore, it is here also assumed that uncoded 6-ary QAM is used in each subchannel (assumes a very good communication link). For the ADSL downlink above, determine the bit rate in each subchannel, the total bit rate, and the bandwidth efficiency. What about filtering away the side-lobes? Let us use a spectral rectangular pulse X srec (f ) of amplitude A and width f to strictly limit the bandwidth Similar to the time-limited case we can write S f (f )S(f ) X srec (f ) Taking the inverse Fourier transform on both sides we get s f (t)s(t) x srec (t)s(t) Af 0 sin(π f 0 t) π f 0 t Since x srec (t) is unlimited along the time axis, this is the case for the filtered signal s f (t) as well The signal x srec (t) defines the ideal Nyquist pulse As a consequence of filtering, the transmitted symbols will overlap in time domain inter-symbol-interference (ISI)
8 Nyquist Pulse How can we further improve ρ? a) x 0 /Rnyq R nyq/ X (f) nc R nyq/ f [Hz] b) x (t) nc -T R s x R Ts nyq 0 nyq R nyq Figure 6.6: a) Ideal Nyquist spectrum; b) Ideal Nyquist pulse. t d d n d N t α k, α k,n α k,n t MIMO MODEL w w k w N r r r k r Nr ML D E C I S I O N R U L E ^ d ^ d... ^ d N t sin(πr nyqt) x nc(t) x 0, t (6.39) πr nyqt { x0/r X nc(f) nyq, f R nyq/ (6.40) 0, f >R nyq/ The Nyquist pulse and the effect of ISI will be studied in Chapter 6 Nt r k α k,nd n + w k n MIMO: multiple-input multiple output transmission over multiple antennas in the same frequency band challenge: the individual wireless channels interfere 5G world record 06: (team from Lund involved) spectral efficiency of 45.6 bps/hz with 8 antennas
Digital Communication System
Digital Communication System Purpose: communicate information at required rate between geographically separated locations reliably (quality) Important point: rate, quality spectral bandwidth, power requirements
More informationPULSE SHAPING AND RECEIVE FILTERING
PULSE SHAPING AND RECEIVE FILTERING Pulse and Pulse Amplitude Modulated Message Spectrum Eye Diagram Nyquist Pulses Matched Filtering Matched, Nyquist Transmit and Receive Filter Combination adaptive components
More informationENGG2310-B Principles of Communication Systems Last Lecture
ENGG2310-B Principles of Communication Systems Last Lecture Wing-Kin Ma Department of Electronic Engineering The Chinese University of Hong Kong, Hong Kong November 28 29, 2017 Recap on ISI model: y(t)
More informationDigital communications - week 1 1
Digital communications - week 1 1 A new signal alternative is sent every Ts. Ts = the signaling (or symbol) time. t new signal sent new signal sent new signal sent 0 Ts 2Ts 3Ts The signaling (or symbol)
More informationWireless PHY: Modulation and Demodulation
Wireless PHY: Modulation and Demodulation Y. Richard Yang 09/11/2012 Outline Admin and recap Amplitude demodulation Digital modulation 2 Admin Assignment 1 posted 3 Recap: Modulation Objective o Frequency
More informationDigital Communication System
Digital Communication System Purpose: communicate information at certain rate between geographically separated locations reliably (quality) Important point: rate, quality spectral bandwidth requirement
More informationChapter 7 Multiple Division Techniques for Traffic Channels
Introduction to Wireless & Mobile Systems Chapter 7 Multiple Division Techniques for Traffic Channels Outline Introduction Concepts and Models for Multiple Divisions Frequency Division Multiple Access
More informationAn introduction to OFDM
An introduction to OFDM Lecture notes in the course Digital communications, advanced course (ETTN1) Section 1: Introduction Göran Lindell, Version 161115 The modulation technique referred to as OFDM (Orthogonal
More informationOutline. Wireless PHY: Modulation and Demodulation. Recap: Modulation. Admin. Recap: Demod of AM. Page 1. Recap: Amplitude Modulation (AM)
Outline Wireless PHY: Modulation and Demodulation Admin and recap Amplitude demodulation Digital modulation Y. Richard Yang 9// Admin Assignment posted Recap: Modulation Objective o Frequency assignment
More informationDigital communication
Chapter 4 Digital communication A digital is a discrete-time binary m : Integers Bin = {0, 1}. To transmit such a it must first be transformed into a analog. The is then transmitted as such or modulated
More informationDigital Modulation Schemes
Digital Modulation Schemes 1. In binary data transmission DPSK is preferred to PSK because (a) a coherent carrier is not required to be generated at the receiver (b) for a given energy per bit, the probability
More informationHandout 13: Intersymbol Interference
ENGG 2310-B: Principles of Communication Systems 2018 19 First Term Handout 13: Intersymbol Interference Instructor: Wing-Kin Ma November 19, 2018 Suggested Reading: Chapter 8 of Simon Haykin and Michael
More informationObjectives. Presentation Outline. Digital Modulation Lecture 03
Digital Modulation Lecture 03 Inter-Symbol Interference Power Spectral Density Richard Harris Objectives To be able to discuss Inter-Symbol Interference (ISI), its causes and possible remedies. To be able
More informationCommunication Channels
Communication Channels wires (PCB trace or conductor on IC) optical fiber (attenuation 4dB/km) broadcast TV (50 kw transmit) voice telephone line (under -9 dbm or 110 µw) walkie-talkie: 500 mw, 467 MHz
More informationRevision of Wireless Channel
Revision of Wireless Channel Quick recap system block diagram CODEC MODEM Wireless Channel Previous three lectures looked into wireless mobile channels To understand mobile communication technologies,
More informationHandout 2: Fourier Transform
ENGG 2310-B: Principles of Communication Systems Handout 2: Fourier ransform 2018 19 First erm Instructor: Wing-Kin Ma September 3, 2018 Suggested Reading: Chapter 2 of Simon Haykin and Michael Moher,
More informationEXAMINATION FOR THE DEGREE OF B.E. Semester 1 June COMMUNICATIONS IV (ELEC ENG 4035)
EXAMINATION FOR THE DEGREE OF B.E. Semester 1 June 2007 101902 COMMUNICATIONS IV (ELEC ENG 4035) Official Reading Time: Writing Time: Total Duration: 10 mins 120 mins 130 mins Instructions: This is a closed
More informationPrinciples of Baseband Digital Data Transmission
Principles of Baseband Digital Data Transmission Prof. Wangrok Oh Dept. of Information Communications Eng. Chungnam National University Prof. Wangrok Oh(CNU) / 3 Overview Baseband Digital Data Transmission
More informationFund. of Digital Communications Ch. 3: Digital Modulation
Fund. of Digital Communications Ch. 3: Digital Modulation Klaus Witrisal witrisal@tugraz.at Signal Processing and Speech Communication Laboratory www.spsc.tugraz.at Graz University of Technology November
More informationChapter-2 SAMPLING PROCESS
Chapter-2 SAMPLING PROCESS SAMPLING: A message signal may originate from a digital or analog source. If the message signal is analog in nature, then it has to be converted into digital form before it can
More informationColumbia University. Principles of Communication Systems ELEN E3701. Spring Semester May Final Examination
1 Columbia University Principles of Communication Systems ELEN E3701 Spring Semester- 2006 9 May 2006 Final Examination Length of Examination- 3 hours Answer All Questions Good Luck!!! I. Kalet 2 Problem
More informationTSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY
TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY 2 Basic Definitions Time and Frequency db conversion Power and dbm Filter Basics 3 Filter Filter is a component with frequency
More informationOutline. EECS 3213 Fall Sebastian Magierowski York University. Review Passband Modulation. Constellations ASK, FSK, PSK.
EECS 3213 Fall 2014 L12: Modulation Sebastian Magierowski York University 1 Outline Review Passband Modulation ASK, FSK, PSK Constellations 2 1 Underlying Idea Attempting to send a sequence of digits through
More informationRevision of Lecture 3
Revision of Lecture 3 Modulator/demodulator Basic operations of modulation and demodulation Complex notations for modulation and demodulation Carrier recovery and timing recovery This lecture: bits map
More informationENSC327 Communication Systems 27: Digital Bandpass Modulation. (Ch. 7) Jie Liang School of Engineering Science Simon Fraser University
ENSC37 Communication Systems 7: Digital Bandpass Modulation (Ch. 7) Jie Liang School of Engineering Science Simon Fraser University 1 Outline 7.1 Preliminaries 7. Binary Amplitude-Shift Keying (BASK) 7.3
More informationTSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY
TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY An Overview of Modulation Techniques: chapter 3.1 3.3.1 2 Introduction (3.1) Analog Modulation Amplitude Modulation Phase and
More informationExercises for chapter 2
Exercises for chapter Digital Communications A baseband PAM system uses as receiver filter f(t) a matched filter, f(t) = g( t), having two choices for transmission filter g(t) g a (t) = ( ) { t Π =, t,
More informationMulti-carrier Modulation and OFDM
3/28/2 Multi-carrier Modulation and OFDM Prof. Luiz DaSilva dasilval@tcd.ie +353 896-366 Multi-carrier systems: basic idea Typical mobile radio channel is a fading channel that is flat or frequency selective
More informationPoint-to-Point Communications
Point-to-Point Communications Key Aspects of Communication Voice Mail Tones Alphabet Signals Air Paper Media Language English/Hindi English/Hindi Outline of Point-to-Point Communication 1. Signals basic
More informationRefresher on Digital Communications Channel, Modulation, and Demodulation
Refresher on Digital Communications Channel, Modulation, and Demodulation Philippe Ciblat Université Paris-Saclay & Télécom ParisTech Outline Section 1: Digital Communication scheme Section 2: A toy example
More informationETSF15 Physical layer communication. Stefan Höst
ETSF15 Physical layer communication Stefan Höst Physical layer Analog vs digital (Previous lecture) Transmission media Modulation Represent digital data in a continuous world Disturbances, Noise and distortion
More informationDIGITAL COMMUNICATIONS SYSTEMS. MSc in Electronic Technologies and Communications
DIGITAL COMMUNICATIONS SYSTEMS MSc in Electronic Technologies and Communications Bandpass binary signalling The common techniques of bandpass binary signalling are: - On-off keying (OOK), also known as
More informationWIRELESS COMMUNICATIONS PRELIMINARIES
WIRELESS COMMUNICATIONS Preliminaries Radio Environment Modulation Performance PRELIMINARIES db s and dbm s Frequency/Time Relationship Bandwidth, Symbol Rate, and Bit Rate 1 DECIBELS Relative signal strengths
More informationLecture #11 Overview. Vector representation of signal waveforms. Two-dimensional signal waveforms. 1 ENGN3226: Digital Communications L#
Lecture #11 Overview Vector representation of signal waveforms Two-dimensional signal waveforms 1 ENGN3226: Digital Communications L#11 00101011 Geometric Representation of Signals We shall develop a geometric
More informationChapter 14 MODULATION INTRODUCTION
Chapter 14 MODULATION INTRODUCTION As we have seen in previous three chapters, different types of media need different types of electromagnetic signals to carry information from the source to the destination.
More informationChpater 8 Digital Transmission through Bandlimited AWGN Channels
Chapter 8. Digital Transmission through Bandlimited AWGN Channels - 1-1 st Semester, 008 Chpater 8 Digital Transmission through Bandlimited AWGN Channels Text. [1] J. G. Proakis and M. Salehi, Communication
More informationEE4601 Communication Systems
4601 Communication Systems Week 8 Binary Modulated Signal Sets Non-Binary Signal Sets 0 c 2011, Georgia Institute of Technology (lect8 1) Binary PSK (BPSK) With BPSK information is transmitted in the carrier
More informationLecture 3: Wireless Physical Layer: Modulation Techniques. Mythili Vutukuru CS 653 Spring 2014 Jan 13, Monday
Lecture 3: Wireless Physical Layer: Modulation Techniques Mythili Vutukuru CS 653 Spring 2014 Jan 13, Monday Modulation We saw a simple example of amplitude modulation in the last lecture Modulation how
More informationQUESTION BANK SUBJECT: DIGITAL COMMUNICATION (15EC61)
QUESTION BANK SUBJECT: DIGITAL COMMUNICATION (15EC61) Module 1 1. Explain Digital communication system with a neat block diagram. 2. What are the differences between digital and analog communication systems?
More informationUniversity of Toronto Electrical & Computer Engineering ECE 316, Winter 2015 Thursday, February 12, Test #1
Name: Student No.: University of Toronto Electrical & Computer Engineering ECE 36, Winter 205 Thursday, February 2, 205 Test # Professor Dimitrios Hatzinakos Professor Deepa Kundur Duration: 50 minutes
More informationChapter 7. Multiple Division Techniques
Chapter 7 Multiple Division Techniques 1 Outline Frequency Division Multiple Access (FDMA) Division Multiple Access (TDMA) Code Division Multiple Access (CDMA) Comparison of FDMA, TDMA, and CDMA Walsh
More informationChapter 6 Passband Data Transmission
Chapter 6 Passband Data Transmission Passband Data Transmission concerns the Transmission of the Digital Data over the real Passband channel. 6.1 Introduction Categories of digital communications (ASK/PSK/FSK)
More informationTransmission Fundamentals
College of Computer & Information Science Wireless Networks Northeastern University Lecture 1 Transmission Fundamentals Signals Data rate and bandwidth Nyquist sampling theorem Shannon capacity theorem
More informationObjectives. Presentation Outline. Digital Modulation Revision
Digital Modulation Revision Professor Richard Harris Objectives To identify the key points from the lecture material presented in the Digital Modulation section of this paper. What is in the examination
More informationFundamentals of Digital Communication
Fundamentals of Digital Communication Network Infrastructures A.A. 2017/18 Digital communication system Analog Digital Input Signal Analog/ Digital Low Pass Filter Sampler Quantizer Source Encoder Channel
More informationMobile Communications
Mobile Communications Wen-Shen Wuen Trans. Wireless Technology Laboratory National Chiao Tung University WS Wuen Mobile Communications 1 Outline Outline 1 Structure of Wireless Communication Link 2 Analog
More informationDiscussion Chapter#5
The Islamic University of Gaza Faculty of Engineering Department of Computer Engineering ECOM 4314: Data Communication Instructor: Dr. Aiman Abu Samra T.A.: Eng. Alaa O. Shama Discussion Chapter#5 Main
More informationLab 3.0. Pulse Shaping and Rayleigh Channel. Faculty of Information Engineering & Technology. The Communications Department
Faculty of Information Engineering & Technology The Communications Department Course: Advanced Communication Lab [COMM 1005] Lab 3.0 Pulse Shaping and Rayleigh Channel 1 TABLE OF CONTENTS 2 Summary...
More informationDigital Communication Digital Modulation Schemes
Digital Communication Digital Modulation Schemes Yabo Li Fall, 2013 Chapter Outline Representation of Digitally Modulated Signals Linear Modulation PAM PSK QAM Multi-Dimensional Signal Non-linear Modulation
More informationMSK has three important properties. However, the PSD of the MSK only drops by 10log 10 9 = 9.54 db below its midband value at ft b = 0.
Gaussian MSK MSK has three important properties Constant envelope (why?) Relatively narrow bandwidth Coherent detection performance equivalent to that of QPSK However, the PSD of the MSK only drops by
More informationDigital Modulators & Line Codes
Digital Modulators & Line Codes Professor A. Manikas Imperial College London EE303 - Communication Systems An Overview of Fundamental Prof. A. Manikas (Imperial College) EE303: Dig. Mod. and Line Codes
More information1. Clearly circle one answer for each part.
TB 1-9 / Exam Style Questions 1 EXAM STYLE QUESTIONS Covering Chapters 1-9 of Telecommunication Breakdown 1. Clearly circle one answer for each part. (a) TRUE or FALSE: Absolute bandwidth is never less
More informationOutline Chapter 3: Principles of Digital Communications
Outline Chapter 3: Principles of Digital Communications Structure of a Data Transmission System Up- and Down-Conversion Lowpass-to-Bandpass Conversion Baseband Presentation of Communication System Basic
More informationCommunications IB Paper 6 Handout 3: Digitisation and Digital Signals
Communications IB Paper 6 Handout 3: Digitisation and Digital Signals Jossy Sayir Signal Processing and Communications Lab Department of Engineering University of Cambridge jossy.sayir@eng.cam.ac.uk Lent
More informationTSEK02: Radio Electronics Lecture 3: Modulation (II) Ted Johansson, EKS, ISY
TSEK02: Radio Electronics Lecture 3: Modulation (II) Ted Johansson, EKS, ISY An Overview of Modulation Techniques chapter 3.3.2 3.3.6 2 Constellation Diagram (3.3.2) Quadrature Modulation Higher Order
More informationLecture 10. Digital Modulation
Digital Modulation Lecture 10 On-Off keying (OOK), or amplitude shift keying (ASK) Phase shift keying (PSK), particularly binary PSK (BPSK) Frequency shift keying Typical spectra Modulation/demodulation
More informationWireless Communication Fading Modulation
EC744 Wireless Communication Fall 2008 Mohamed Essam Khedr Department of Electronics and Communications Wireless Communication Fading Modulation Syllabus Tentatively Week 1 Week 2 Week 3 Week 4 Week 5
More informationSpread spectrum. Outline : 1. Baseband 2. DS/BPSK Modulation 3. CDM(A) system 4. Multi-path 5. Exercices. Exercise session 7 : Spread spectrum 1
Spread spectrum Outline : 1. Baseband 2. DS/BPSK Modulation 3. CDM(A) system 4. Multi-path 5. Exercices Exercise session 7 : Spread spectrum 1 1. Baseband +1 b(t) b(t) -1 T b t Spreading +1-1 T c t m(t)
More informationEECS 455 Solution to Problem Set 3
EECS 455 Solution to Problem Set 3. (a) Is it possible to have reliably communication with a data rate of.5mbps using power P 3 Watts with a bandwidth of W MHz and a noise power spectral density of N 8
More informationON SYMBOL TIMING RECOVERY IN ALL-DIGITAL RECEIVERS
ON SYMBOL TIMING RECOVERY IN ALL-DIGITAL RECEIVERS 1 Ali A. Ghrayeb New Mexico State University, Box 30001, Dept 3-O, Las Cruces, NM, 88003 (e-mail: aghrayeb@nmsu.edu) ABSTRACT Sandia National Laboratories
More informationData Encoding g(p (part 2)
Data Encoding g(p (part 2) CSE 3213 Instructor: U.T. Nguyen 10/11/2007 12:44 PM 1 Analog Data, Digital Signals (5.3) 2 1 Analog Data, Digital Signals Digitization Conversion of analog data into digital
More informationCT-516 Advanced Digital Communications
CT-516 Advanced Digital Communications Yash Vasavada Winter 2017 DA-IICT Lecture 17 Channel Coding and Power/Bandwidth Tradeoff 20 th April 2017 Power and Bandwidth Tradeoff (for achieving a particular
More informationExperimenting with Orthogonal Frequency-Division Multiplexing OFDM Modulation
FUTEBOL Federated Union of Telecommunications Research Facilities for an EU-Brazil Open Laboratory Experimenting with Orthogonal Frequency-Division Multiplexing OFDM Modulation The content of these slides
More informationLecture 10 Performance of Communication System: Bit Error Rate (BER) EE4900/EE6720 Digital Communications
EE4900/EE6720: Digital Communications 1 Lecture 10 Performance of Communication System: Bit Error Rate (BER) Block Diagrams of Communication System Digital Communication System 2 Informatio n (sound, video,
More informationDigital modulations (part 1)
Digital modulations (part 1) Outline : 1. Digital modulations definition. Classic linear modulations.1 Power spectral density. Amplitude digital modulation (ASK).3 Phase digital modulation (PSK).4 Quadrature
More informationLine Coding for Digital Communication
Line Coding for Digital Communication How do we transmit bits over a wire, RF, fiber? Line codes, many options Power spectrum of line codes, how much bandwidth do they take Clock signal and synchronization
More informationProblem Sheet 1 Probability, random processes, and noise
Problem Sheet 1 Probability, random processes, and noise 1. If F X (x) is the distribution function of a random variable X and x 1 x 2, show that F X (x 1 ) F X (x 2 ). 2. Use the definition of the cumulative
More informationHW 6 Due: November 3, 10:39 AM (in class)
ECS 332: Principles of Communications 2015/1 HW 6 Due: November 3, 10:39 AM (in class) Lecturer: Prapun Suksompong, Ph.D. Instructions (a) ONE part of a question will be graded (5 pt). Of course, you do
More informationBasic Concepts in Data Transmission
Basic Concepts in Data Transmission EE450: Introduction to Computer Networks Professor A. Zahid A.Zahid-EE450 1 Data and Signals Data is an entity that convey information Analog Continuous values within
More informationContents. 7.1 Line Coding. Dr. Ali Muqaibel [Principles of Digital Transmission ]
Contents 7.1 Line Coding... 1 Performance Criteria of Line Codes... 4 Advanced Examples in Line Coding: High Density Bipolar (HDBN)... 5 7. Power Spectral Density of Line Codes... 5 7.3 Pulse shaping and
More informationTheory of Telecommunications Networks
Theory of Telecommunications Networks Anton Čižmár Ján Papaj Department of electronics and multimedia telecommunications CONTENTS Preface... 5 1 Introduction... 6 1.1 Mathematical models for communication
More informationUNIT 2 DIGITAL COMMUNICATION DIGITAL COMMUNICATION-Introduction The techniques used to modulate digital information so that it can be transmitted via microwave, satellite or down a cable pair is different
More informationAdvanced Modulation & Coding EEE8003/8104
dvanced Modulation & Coding EEE8003/804 Stéphane Le Goff School of Electrical and Electronic Engineering Newcastle University . Basic Definitions nalogue signal n analogue signal s(t) is defined as a physical
More informationSolution to Chapter 4 Problems
Solution to Chapter 4 Problems Problem 4.1 1) Since F[sinc(400t)]= 1 modulation index 400 ( f 400 β f = k f max[ m(t) ] W Hence, the modulated signal is ), the bandwidth of the message signal is W = 00
More informationCOSC 3213: Computer Networks I: Chapter 3 Handout #4. Instructor: Dr. Marvin Mandelbaum Department of Computer Science York University Section A
COSC 3213: Computer Networks I: Chapter 3 Handout #4 Instructor: Dr. Marvin Mandelbaum Department of Computer Science York University Section A Topics: 1. Line Coding: Unipolar, Polar,and Inverted ; Bipolar;
More informationDesign of a Transceiver for 3G DECT Physical Layer. - Rohit Budhiraja
Design of a Transceiver for 3G DECT Physical Layer - Rohit Budhiraja The Big Picture 2G DECT Binary GFSK 1.152Mbps 3G DECT M-ary DPSK 3.456 Mbps DECT - Digital Enhanced Cordless Telecommunications Overview
More informationModule 4. Signal Representation and Baseband Processing. Version 2 ECE IIT, Kharagpur
Module 4 Signal Representation and Baseband Processing Lesson 1 Nyquist Filtering and Inter Symbol Interference After reading this lesson, you will learn about: Power spectrum of a random binary sequence;
More informationEE6604 Personal & Mobile Communications. Week 10. Modulation Techniques
EE6604 Personal & Mobile Communications Week 10 Modulation Techniques 1 Modulation for Wireless Systems To achieve high spectral efficiency, power- and bandwidth-efficient modulation techniques are used
More informationWireless PHY: Modulation and Demodulation
Wireless PHY: Modulation and Demodulation Y. Richard Yang 09/6/2012 Outline Admin and recap Frequency domain examples Basic concepts of modulation Amplitude modulation Amplitude demodulation frequency
More informationEC 6501 DIGITAL COMMUNICATION UNIT - IV PART A
EC 6501 DIGITAL COMMUNICATION UNIT - IV PART A 1. Distinguish coherent vs non coherent digital modulation techniques. [N/D-16] a. Coherent detection: In this method the local carrier generated at the receiver
More informationChapter 3 Digital Transmission Fundamentals
Chapter 3 Digital Transmission Fundamentals Characterization of Communication Channels Fundamental Limits in Digital Transmission CSE 323, Winter 200 Instructor: Foroohar Foroozan Chapter 3 Digital Transmission
More informationIntroduction to Communications Part Two: Physical Layer Ch5: Analog Transmission. Goals of This Class. Warm Up. Outline of the Class
Introduction to Communications Part Two: Physical Layer Ch5: Analog Transmission Kuang Chiu Huang TCM NCKU Spring/2008 2009/4/11 KuangChiu Huang 1 Goals of This Class Through the lecture of analog transmission,
More informationExam in 1TT850, 1E275. Modulation, Demodulation and Coding course
Exam in 1TT850, 1E275 Modulation, Demodulation and Coding course EI, TF, IT programs 16th of August 2004, 14:00-19:00 Signals and systems, Uppsala university Examiner Sorour Falahati office: 018-471 3071
More informationECE5713 : Advanced Digital Communications
ECE5713 : Advanced Digital Communications Bandpass Modulation MPSK MASK, OOK MFSK 04-May-15 Advanced Digital Communications, Spring-2015, Week-8 1 In-phase and Quadrature (I&Q) Representation Any bandpass
More informationEE5713 : Advanced Digital Communications
EE573 : Advanced Digital Communications Week 4, 5: Inter Symbol Interference (ISI) Nyquist Criteria for ISI Pulse Shaping and Raised-Cosine Filter Eye Pattern Error Performance Degradation (On Board) Demodulation
More informationCSCD 433 Network Programming Fall Lecture 5 Physical Layer Continued
CSCD 433 Network Programming Fall 2016 Lecture 5 Physical Layer Continued 1 Topics Definitions Analog Transmission of Digital Data Digital Transmission of Analog Data Multiplexing 2 Different Types of
More informationDepartment of Electronics and Communication Engineering 1
UNIT I SAMPLING AND QUANTIZATION Pulse Modulation 1. Explain in detail the generation of PWM and PPM signals (16) (M/J 2011) 2. Explain in detail the concept of PWM and PAM (16) (N/D 2012) 3. What is the
More informationOther Modulation Techniques - CAP, QAM, DMT
Other Modulation Techniques - CAP, QAM, DMT Prof. David Johns (johns@eecg.toronto.edu) (www.eecg.toronto.edu/~johns) slide 1 of 47 Complex Signals Concept useful for describing a pair of real signals Let
More informationUniversity of Manchester. CS3282: Digital Communications 06. Section 9: Multi-level digital modulation & demodulation
University of Manchester CS3282: Digital Communications 06 Section 9: Multi-level digital modulation & demodulation 2/05/06 CS3282 Sectn 9 1 9.1. Introduction: So far, mainly binary signalling using ASK,
More informationCHANNEL ENCODING & DECODING. Binary Interface
CHANNEL ENCODING & DECODING Input Source Encoder Channel Encoder Binary Interface Channel Output Source Decoder Channel Decoder 1 Simplest Example of channel encoding A sequence of binary digits is mapped,
More informationReceiver Designs for the Radio Channel
Receiver Designs for the Radio Channel COS 463: Wireless Networks Lecture 15 Kyle Jamieson [Parts adapted from C. Sodini, W. Ozan, J. Tan] Today 1. Delay Spread and Frequency-Selective Fading 2. Time-Domain
More informationOutline Chapter 4: Orthogonal Frequency Division Multiplexing
Outline Chapter 4: Orthogonal Frequency Division Multiplexing Fading Channel Flat fading channel Frequency selective channel ISI Single Carrier Equalization Orthogonal Frequency Division Multiplexing Principle
More informationPrinciples of Communications ECS 332
Principles of Communications ECS 332 Asst. Prof. Dr. Prapun Suksompong prapun@siit.tu.ac.th 5. Angle Modulation Office Hours: BKD, 6th floor of Sirindhralai building Wednesday 4:3-5:3 Friday 4:3-5:3 Example
More informationCommunication Theory
Communication Theory Adnan Aziz Abstract We review the basic elements of communications systems, our goal being to motivate our study of filter implementation in VLSI. Specifically, we review some basic
More informationConsider the cosine wave. Plot the spectrum of the discrete-time signal g (t) derived by sampling g(t) at the times t n = n=f s, where.
Problem 4.1.1 Consider the cosine wave g(t) =A cos(f 0 t) Plot the spectrum of the discrete-time signal g (t) derived by sampling g(t) at the times t n = n=f s, where n =0 1 and (i) f s = f 0 (ii) f s
More informationComputer Networks - Xarxes de Computadors
Computer Networks - Xarxes de Computadors Outline Course Syllabus Unit 1: Introduction Unit 2. IP Networks Unit 3. Point to Point Protocols -TCP Unit 4. Local Area Networks, LANs 1 Outline Introduction
More informationMobile Radio Systems OPAM: Understanding OFDM and Spread Spectrum
Mobile Radio Systems OPAM: Understanding OFDM and Spread Spectrum Klaus Witrisal witrisal@tugraz.at Signal Processing and Speech Communication Laboratory www.spsc.tugraz.at Graz University of Technology
More informationDownloaded from 1
VII SEMESTER FINAL EXAMINATION-2004 Attempt ALL questions. Q. [1] How does Digital communication System differ from Analog systems? Draw functional block diagram of DCS and explain the significance of
More informationOrthogonal Frequency Division Multiplexing & Measurement of its Performance
Available Online at www.ijcsmc.com International Journal of Computer Science and Mobile Computing A Monthly Journal of Computer Science and Information Technology IJCSMC, Vol. 5, Issue. 2, February 2016,
More informationCommunications IB Paper 6 Handout 2: Analogue Modulation
Communications IB Paper 6 Handout 2: Analogue Modulation Jossy Sayir Signal Processing and Communications Lab Department of Engineering University of Cambridge jossy.sayir@eng.cam.ac.uk Lent Term c Jossy
More information