Concealed Shallow tab 17.3 (.68) 11 (.44) 86 (3.38) 44 (1.72) 8 (5/16) Hex wrench opening (.252) 2 PL. Receptacle panel. Latch. panel Ø13 (.
|
|
- Julianna Weaver
- 5 years ago
- Views:
Transcription
1 22 R2 Draw Concealed Shallow tab High tensile Suited for thin panels Ø 5 (.196) (.).3 (.6).5 Average ultimate tensile : * Average ultimate shear : 900 N (2000 lbf) Install assembly with M5 (No. 10) screws (not supplied) min. (3.) min. panel panel Ø13 (5/) Hex wrench Ø 5 (.196) 4 PL * Typical on latch and receptacle.3 (.) 19 (.75) 19 (.75) Optional hole plugs to conceal actuator access hole are available for a 13 diameter hole R R
2 R2 Draw Concealed Deep tab (1.12) Ø 5.5 (.21) (.) 30 (1.19) 3 (1.50) Ø 5.5 (.21) 4 PL 29 (1.13) High tensile Suited for thick panels * Performance details Average ultimate tensile : (3.) panel panel Ø13 (5/) Hex wrench 52 (2.03) * Typical on latch and receptacle Average ultimate shear : 900N (2000 lbf) Install assembly with Ø 5 (.205) rivets or M5 (No. 10) screws (not supplied) (.) 3 (1.50) available for a 13 diameter hole R R
3 230 R2 Draw Concealed Mortise High tensile Suited for mortise or side mount installation Average ultimate tensile : Average ultimate shear : 900 N (2000 lbf) Install assembly with Ø 6 (1/4) rivets or M6 (1/4) screws (not supplied). A 1.6 (.06) gap should be maintained between latch and receptacle panel Ø (.252 ) Ø 6.6 (.26) 4 pl +0.1 (1.73) (.) 2 pl Ø 13 (3.) (.437) ACTUAL (5/) SIZE Hex wrench panel.3 (1.27) 24 (.94).3 (1.27) 6 pl available for a 13 diameter hole R R
4 R2 Draw Concealed Front mount (5.) Ø 5.2 (.205) 2 Countersink Front Mount 151 (5.94) 1Pocket (4.3) 4 (.) 2 Countersink (5/) Hex wrench (.) 4.5 Deep recess (.1) 12 (.46) (.67) Ø 13 Actuator hole for latch side only 1 (4.3) Pocket for mounting 46 (1.0) min. Clearance for cam rotation Rear Mount 2 Countersink 4 (.) 150 (5.) Ø 5.2 (.205) available for a 13 diameter hole High tensile Front mount installation Average ultimate tensile : 4000 N (900 lbf) : Wood application: Install assembly with M5 (No. 10) flat head screws (not supplied). Note: strength is dependant on mounting hardware and installation material Metal application: Install assembly with 5 (.196) flathead rivets or M5 (No. 10) screws. Note: Max. metal panel thickness should be (.10) R R
5 2 R5 Draw Concealed Heavy-duty High tensile Consistent pull-up Concealed installation Average ultimate tensile :,100 N (2500 lbf) Average ultimate shear : 76,920 N (292 lbf) Install assembly with Ø 6 (1/4) rivets or M6 (1/4) screws (not supplied) Notes Operating force To open: 4 N m (35 in lbf) To close: 4 N m (35 in lbf) 10 (.40) Recessed Pocket +0.1 Ø (.256 ) -0.0 (5/) Hex wrench Ø 12 (.47) 6 Holes Ø 6.5 (.2).5 panel Ø 13.5 (1.).5 Hook to lock over Ø 10.3 (.40) pin 37 (1.47) 55 (2.) Radius 13.2 (.52) 94 (3.69) Ø 9.5 (.3) (.31) Travel panel (1.).5 Side Mount Exterior of cabinet 12 (.47) 94 (3.69) Ø 6.5 (.2) (6 Holes) Frame 45 (1.77) (1.) 45 (1.77) available for a 13 diameter hole R R
Concealed Tab Mount 17.3 (.68) 11 (.44) 86 (3.38) 44 (1.72) 8 (5/16) Hex wrench opening. Receptacle panel. Latch. panel Ø 13 (.50) 44 (1.72) 19 (.
306 R2 Draw Concealed Tab Mount High tensile Suited for thin panels Average ultimate tensile : *13 Ø5 (.196).5 (.).3 (.6).5.5 Average ultimate shear : 900 N (2000 lbf) Install assembly with M5 (No. 10)
More informationREAD BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION
edium + Heavy duty READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Pay attention to danger and safety notices. be exposed: Carefully
More informationInstallation Instructions
edium + Heavy duty READ BEFORE INSTALLING UNIT Preliminary instructions: 1. Check window opening size: the mounting parts furnished with this air conditioner are made to install in a wooden sill double-hung
More informationINSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET
HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)
More information4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162
DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP
More informationTOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
More informationInstallation Instructions
For Medium (15-18.5K) + Heavy duty (22-28.5K) Air Conditioner READ BEFORE INSTALLING UNIT To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp
More informationOVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin
DEVICES COVERED IN THIS DOCUMENT: 46CE Cylinder Escutcheon Key locks and 46DT Dummy Trim Pull when dogged unlocks lever 46BE Blank Escutcheon Always operable 46NL Night Latch Key retracts latchbolt 46NK
More informationMOVENTO. The Evolution of Motion
The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer
More informationHIT-30 ALUMINUM DOOR SERIES OWNERS MANUAL
HIT-30 ALUMINUM DOOR SERIES OWNERS MANUAL INSTALL LOCKS LATCHES LEVERS / PADDLES INDICATORS STRIKES Every Installation Is A Self-Portrait Of The Person Who Did It! Autograph Your Work With Excellence!
More information33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
911402-00 Rim Exit Device 33/35A Series Installation Instructions Devices covered by these instructions: 33/35A Rim Exit Device CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
More information35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate
35mm 110 Deg. Concealed Hinge with Mounting Plate Most economical of our 35mm concealed hinges. 386 41102 00 386 41102 08 386 41102 15 Slide-on Full overlay Self Closing Slide-on Half overlay Self Closing
More informationKwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationCONCEALED VERTICAL ROD PANIC EXIT DEVICE
INSTALLATION INSTRUCTIONS CRL JACKSON 1085-1085P CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0236 ORDER OF
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since
More informationINSTALLATION INSTRUCTIONS
Do not attempt to install this product on any vehicle other than the one it is designed for and listed above! Parts List 10 3/8 X 1 1/4 Hex Bolt 10 3/8 Lock Washer 4 3/8 Hex Nut 4 3/8 Flat Washer 2 3169)
More information* * 98/9950WDC. Fire-Rated Devices include these. additional components. 1-Point Latch (LBL)
*24739468* 24739468 98/9950WDC Installation Instructions 1-Point Latch (LBL) Fire-Rated Devices include these additional components Metal Edge Wrap required for 60 and 90-minute applications 2-Point Latch
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
More informationInstalling flat panels on the MPL15 wall mount
Installing flat panels on the MPL15 wall mount The MPL15 (DS-VW775) is a full-service video wall mount that can accommodate tiled LCD panels with up to a 400 x 400 mm VESA pattern in portrait and landscape
More informationASSA ABLOY. Model W91 Overhead Concealed Wood Frame Installation Instructions IMPORTANT: BEFORE INSTALLING: TO DETERMINE HAND OF YOUR DOOR:
Model W91 Overhead Concealed s Wood Frame Installation Instructions *Butt or 3/4 Offset Pivot Hung, Multi Sized 1-3, 3-6 Non-Hold Open and Hold Open Models *Other means except 4-1/2" x 4-1/2" or 3/4" offset
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationPreference Collection and Treatment Console INSTALLATION GUIDE
Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious
More informationINSTALLATION INSTRUCTIONS DODGE RAM 2 & 4WD 1500 PART # P5058
INSTALLATION INSTRUCTIONS 2009-13 DODGE RAM 2 & 4WD 1500 PART # P5058 PARTS LIST: Qty Description Qty Description 1 Grille Guard 12 12-1.75mm Hex Nuts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationInstallation Instructions
For Medium (15-18.5K) + Heavy duty (-8.5K) Air Conditioner READ BEFORE INSTALLING UNIT To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges
More informationTABLETOP. Cut a 1/4" chamfer along front and back edges of each shelf (top side only).
PRTS tabletop boards/shelves - pine - (5) 3 /4" x 12" x 35 3 /4" B aluminum angles - (10) 3 /4" x 3 /4" x 3 /32" x 12" rear braces - maple - (2) 3 /4" x 2 1 /2" x 50" rear rails - maple - (2) 3 /4" x 2
More informationED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
More informationTheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered.
TheDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com TheDepot.com To create a product innovation is
More informationNORTH AMERICA ONLY PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES
"B" B. C. PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES PVC - DWV PIPE FITTINGS FOR "X" SOC. HD. SCREW (N) HOLES "D" "C" "A" O.D. ALTER IF CONSTRAINED BY SPACE LIMITATION. (2) MIN. FASTENING HOLES REQUIRED.
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL
FASTENER AND HARDWARE GENERAL REQUIREMENTS 1. DESCRIPTION This section contains general requirements for common hardware installation. Covered are selection and installation of cotter pins, installation
More informationWaste/recycle sets. Waste/recycle sets. Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com SERVO-DRIVE BLUMOTION Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX
More informationAssembly Instructions
1 27694 Trend Podium Assembly Instructions #27694 Trend Podium Part Drawing Description Qty Part Drawing Description Qty P-1 Base 1 EA Hardware List Screw M6x12mm 30 EA P-2 Right Side Panel 1 EA A2 Phil
More informationHow To Measure Your Finished Opening
3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips
More informationMOVENTO. The Evolution of Motion For 1/2" Drawer Material Thickness
The Evolution of Motion For 1/2" Drawer Material Thickness is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed
More informationVigilant Cigar Humidor Vault. Assembly Instructions
Vigilant Cigar Humidor Vault Assembly Instructions Models: 1000, 1500, and 2000 Congratulations! You have purchased a superior cigar humidor. These humidors have been specifically designed to properly
More informationINSTALLING YOUR NEW SPRING LIFT ARM KIT
INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as
More informationCONCEALED ROD CRASH BAR PR-7085 SERIES EXIT DEVICE ASSEMBLY DETAILS PR mm. 10mm. Lock cylinder. 10mm. Cross bar length (see note #8) Dogging
Floor line TITLE ASSEMLY DETAILS PR-7085 4:02 Hinge stile (inside) Lock stile (inside) Lock stile (outside) Drill 5mm (.20) and tap 1/4-20 (2) Drill 7mm (.266) holes (2) 9mm 12mm See note #6 160mm 9.5mm
More informationINSTRUCTION SHEET U19
U19 All Refrigerator and All Freezer Trim Kit Installation Product Line: U19 All Refrigerator and All Freezer Models Parts Included in Kit TRIMKITEZ1 (Part# 297333500): Single Trim Kit Components Single
More informationBioPrism Solid Surface
Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from
More informationHookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
More informationPrivacy Wall & Glass Selections Pivot-Hinged Door (For products manufactured after September 14, 2009)
Privacy Wall & Glass Selections Pivot-Hinged Door (For products manufactured after September 14, 2009) 3/16" HEX BIT #2 ACR BIT 3/8" HEX SOCKET Full-Height (No Switch) Transom (No Switch) Full-Height (With
More informationAssembly Instructions Nevins Phone Booth
Assembly Instructions Nevins Phone Booth Included Hardware Tools Required supplied by installer Drill & Bit Bolt A - (16) 1/4-20 x 1-1/2 hex head Bolt B - (20) 1/4-20 x 2-1/2 phillips head Screw 1 - (24)
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More information1. Begin by rolling your window up all the way 2. Remove your door and window handles by unscrewing the flat head set screws behind each handle.
1. Begin by rolling your window up all the way 2. Remove your door and window handles by unscrewing the flat head set screws behind each handle. 3. Remove the 12 screws that attach the steel interior door
More information1. Turn off or disconnect power to unit (machine). 2. Push IN the release bar on the quick change base plate. Locking latch will pivot downward.
Figure 1 Miniature Quick Change Applicators, of the end feed type, are designed to crimp end feed strip terminals to prestripped wires. Each applicator is set up to accept the strip form of certain specific
More informationChain Drive Vise. Installation Instructions. (revised 05/04/2016)
Chain Drive Vise Installation Instructions (revised 05/04/2016) Lie-Nielsen Chain Drive Vise Instructions Table of Contents page About Your Chain Drive Vise 3 Parts List 4 Exploded Parts Diagram 5 step
More informationNARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions
NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE Installation Instructions PART Y015 JUNE 2016 Table of Contents Section 1. GENERAL NOTES AND GUIDELINES... 2. DOOR HARDWARE A. Locks B. Push/Pulls
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 1285 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0248 ORDER OF ASSEMBLY
More informationINSTALLATION GUIDE MICROWAVE OVEN UPMC3084ST. MFL _00
INSTALLATION GUIDE MICROWAVE OVEN UPMC3084ST MFL06208710_00 www.thesignaturekitchen.com YOUR SAFETY FIRST BEFORE YOU START Proper installation is the installer's responsibility! Proper installation by
More information33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
More informationCM5500 COMPUTER MANAGED MORTISE LOCK INSTALLATION MANUAL
The 5500 series lock is a stand-alone, microprocessor controlled, electromechanical locking system. The 5500 employs a heavy-duty mechanical design with fewer moving parts that a standard mechanical mortise
More informationHousehold Appliances. Over-the-Range Microwave. Installation Instructions. For Models: HMV9302, HMV9305, HMV9306, HMV9307
Over-the-Range Microwave Household Appliances Installation Instructions For Models: HMV9302, HMV9305, HMV9306, HMV9307 PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING IMPORTANT: Save these instructions
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationLEG CURL IP-S1315 INSTALLATION INSTRUCTIONS
LEG CURL IP-S35 INSTALLATION INSTRUCTIONS Copyright 2009. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written
More informationKIT ASSEMBLY INSTRUCTIONS
JUMPING JACK TRAILER KIT KIT ASSEMBLY INSTRUCTIONS A torque wrench (provided in the in-store tool kit) is required to assemble this trailer kit. Torque is a twisting (ft.-lb.).copy force measured in foot-pounds
More informationPOP BLIND RIVET NUTS.
POP BLIND RIVET NUTS www.emhart.com POP NUT Blind Rivet Nuts Introduction POP NUT brand blind rivet nuts are internally threaded rivets that can be installed into sheet-metal, tubing, extrusions, plastics
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationPreference Collection 5580 Treatment Console INSTALLATION GUIDE
Preference Collection 5580 Treatment Console INSTALLATION GUIDE 0 WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious injury
More informationChain Drive Vise. Installation Instructions. (revised 11/29/2018)
Chain Drive Vise Installation Instructions (revised 11/29/2018) Lie-Nielsen Chain Drive Vise Instructions Table of Contents page About Your Chain Drive Vise 3 Parts List 4 Exploded Parts Diagram 5 step
More informationK.D. DEFIANT II LOCKER ASSEMBLY INSTRUCTIONS
K.D. DEFIANT II LOCKER ASSEMBLY INSTRUCTIONS These Instructions Cover GUARDIAN DEFIANT AND INVINCIBLE II DEFIANT SINGLE POINT LATCH LOCKERS CONTENTS General Instructions 1 Maj Locker Components Hardware
More informationInstallation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
More informationAdjusting 90 Compass Hardware Including 4-Point
Toll Free 800.564.948 www.comfortcompany.com 509 South nd Ave Bozeman, MT 59718 Adjusting 90 Compass Hardware Including 4-Point Compass Hardware - US Patent No. 7,104,610 & 7,891,739 Apparatus for Mounting
More informationCORKSPORT License Plate Relocation Kit
I N S T A L L A T I O N I N S T R U C T I O N S CORKSPORT License Plate Relocation Kit 2018+ Mazda 6 PART #: ATK-8-010-10 Need Help With Your Installation? Call (360) 260-CORK PAGE 1 CORKSPORT License
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationAssembly Instructions Nevins Phone Booth
Assembly Instructions Nevins Phone Booth Included Hardware Tools Required supplied by installer Drill & Bit Socket Wrench Bolt A - (16) 1/4-20 x 1-1/2 hex head Bolt B - (20) 1/4-20 x 2-1/4 phillips head
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More informationIMPORTANT: installation. FLOOR ANCHORED CEILING HUNG OVERHEAD BRACED FLOOR-TO- CEILING ANCHORED
INSTALLATION INSTRUCTIONS MAXIMUM PRIVACY COMPACT LAMINATE TOILET PARTITIONS 2080 DuraLineSeries 2180 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
More informationMODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
More informationSTANDARD. Drawer runner program. Perfecting motion.
STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance
More informationINSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675
More informationS6 User s Manual USER S MANUAL ver. 1.0
S6 User s Manual SKEETER - 1U LOW PROFILE SOLUTION Table of Contents Tabletop Configuration 2 Tabletop Configuration Accessories 4 Slide Configuration 5 slide configuration accessories 7 rack Mount configuration
More information98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device
911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device
More informationThese door closers should NOT be installed on the exposed side (weather side) of exterior doors. WOOD 3/16" 1/4"- 20
Hollow-metal doors require channel or box-type reinforcement when thru-bolt mount is specified. Hold open arms are not permitted on fire doors. Sex-bolts may be required for wood or plastic faced fire
More informationOPERATOR'S MANUAL RULES FOR SAFE OPERATION
OPERATOR'S MANUAL #4950300 ROUTER AND JIG SAW MOUNTING KIT (FOR USE WITH THE BT3000 TABLE SAW) CONGRATULATIONS AND THANK YOU FOR BUYING THIS RYOBI ROUTER AND JIG SAW MOUNTING KIT. Your new #4950300 Router
More informationStainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1
Izerwaren Order number 51.004 Stainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1 Flush Door Lever Handle, for use with entry set with Profile Cylinder 304 Stainless Steel 100
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationWaste/recycle sets. Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX waste/recycle
More informationEntry Mortise Handleset
1. Pencil 2. No. 2 and No. 3 Phillips Head Screwdrivers 3. No. 1 and No. 2 Slotted Screw Drivers 4. 1/8" Allen Head Wrench 5. 3/4" Wood Chisel or Corner Chisel 6. Measuring Device 7. Lock Mortising Tool
More informationPerfect Hinges. Pick the. for Your Boxes. Selecting just the right hinges to fit each special box can be a daunting task.
Pick the Perfect Hinges for Your Boxes The right choice will help you design and build better boxes by Doug Stowe Selecting just the right hinges to fit each special box can be a daunting task. There are
More informationMETAL BLINDS. Deluxe GETTING STARTED OPTIONAL HARDWARE. A few simple tools are required: STANDARD HARDWARE
METAL BLINDS Deluxe GETTING STARTED OPTIONAL HARDWARE A few simple tools are required: Steel Tape Measure Pencil Level Hold Down Brackets with Screws Extension Bracket Power Drill and Drill Bits Flathead
More informationCW-Type Wall Mounted Cabinets Installation Instructions
Instruction Sheet 860446194 Issue 2, March 2013 CW-Type Wall Mounted Cabinets Installation Instructions General CommScope wall mount cabinets are available in 24-inch (610mm), 36-inch (914mm) and 48-inch
More informationCannonball Illustrations & Info
Cannonball Illustrations & Info KHTRACK8 8 KHTRACK10 10 KHTRACK12 12 KEY-HOLE TRACK 14 Gauge Galvanized track. Patented key-hole design makes this track the most versatile of the track systems. Key holes
More informationCaptive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED
Solutions Inc. PA-3500 Line Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED The DFCI PA-3500 Line of fasteners combine the operating convenience, predictable clamping
More informationhidden perfection SYSTEM 3
hidden perfection APPLICATIONS System 3 is the perfect solution for 360º rotating doors: TABLE OF CONTENTS FRITSJURGENS 05 Hidden Perfection 06 Perfection all around 09 Designed to stand the test of time
More informationINSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION Soild Phenolic Series contents page 1080 DuraLineSeries...2-21 1180 DuraLineSeries...2-21 2080 DuraLineSeries Maximum Privacy...22-41 2180 DuraLineSeries Maximum Privacy...22-41
More informationLOFT DOOR HANGER BARN DOORS & HARDWARE. Hardware Installation Instructions. Page
LOFT DOOR HANGER Page 1 Specifications 2 7/16" 3/8" 1-1/2 1-3/4 Ø3 3 7/8" 11-1/16 Page 2 Parts and Tools Tools Needed Tape Measure Pencil Drill with 1/8, 1/4 and 3/8 bits, 1 spade bit and Phillips bit
More informationPFW 6875 Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids
Maximum Flat Panel Weight: 160 lb. / 72.57 kg. Included Components Wall Mount (Qty 1) Extension Brackets (Qty 2) Bracket (Qty 1 Pair) 5/16 Flat Washers (Qty 4) Universal Spacers (Qty 8) M5 Allen Driver
More informationTRIADE MAXI TRIADE MAXI WOOD AND GLASS SHELVING SYSTEMS
is the concealed mounting bracket for shelves minimum 0mm thick. It has been conceived to simplify the shelf installation. It is provided with three indipendent adjustments: 1) VERTICAL Before installing
More informationAdjusting, Changing and Maintaining The Latches and Catches on Your Airstream
Adjusting, Changing and Maintaining The Latches and Catches on Your Airstream Hinges,Latches and Catches in your Airstream Bumps, pulling, gravity and time can have an affect on hinges and latches. Adjustments
More informationAdjusting 45 Compass Hardware Including 4-Point
Adjusting 45 Compass Hardware Including 4-Point Compass Hardware - US Patent No. 7,104,610 & 7,891,739 Apparatus for Mounting a Wheelchair Back Quick Release Fixed 4-Point The information in this manual
More informationClassic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationTools Required. Bench Hardware. Bench Parts. Planter Hardware. Planter Parts. BENCH/PLANTER INSTALLATION GUIDELINES for
Arbor Collection / Harvest Collection / Terra Collection Page 1 Please read all instructions completely before starting any part of the installation. Each AZEK and Kit comes complete with all hardware,
More informationInstallation Instructions For Heavy Duty (FAS Models) and Median (FAM Models) Air Conditioners
Installation Instructions For Heavy Duty (FAS Models) and Median (FAM Models) Air Conditioners Please read ALL instructions before installing. Two people are recommended to install this product. If a new
More information1790 Touchbar. Installation Instructions. Rim Panic Device ININST Index:
Installation Instructions ININST.1001 1790 Touchbar Rim Panic Device Index: Before Installation... 2 Installation... 2 Touchbar Dogging... 7 RM170 Mullion Installation... 8 Field Sizing Device... 10 2090
More informationINSTALLATION INSTRUCTIONS REPLACING EXISTING DEADBOLT ASSEMBLY
INSTALLATION INSTRUCTIONS REPLACING EXISTING DEADBOLT ASSEMBLY A B C L M N D E F G O P Q H I J Tools provided in Amesbury installation kit: (A) door router fixture, (B) doorframe router fixture, (C) ½
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD 09-ON DODGE RAM PART #
INSTALLATION INSTRUCTIONS GRILLE GUARD 09-ON DODGE RAM PART # PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Brackets (for trucks without 22 12mm x 30.1mm OD
More information