Correct-Touch GRAPHIC ARTS. Asahi Photoproducts is Part of Asahi Kasei ematerials. The commitment of the Asahi Kasei Group:

Transcription

1 Asahi Photoproducts is Part of Asahi Kasei ematerials. The commitment of the Asahi Kasei Group: To do all that we can in every era to help the people of the world, make the most of life and attain fulfillment in living. Since our founding, we have always been deeply committed to contributing to the development of society, boldly anticipating the emergence of new needs. This is what we mean by»creating for Tomorrow.«

2 Photopolymers & Processing Units

3

4 Photopolymers

5 Photopolymers AWP Aqueous Washable Plate Developed for the next generation AWP our latest development is a unique plate making technology and a beneficial - alter native to other print processes. The»Ink Pinning Technology«provides a simple way to improve print quality. High printing resolution, bright pictures and excellent press performance are a small selection of all the advantages you can get out of»ink Pinning Technology«AWP will help you by saving time and money, reduce waste and assist in preserving precious energy resources. The system enables the necessary control to consistently reproduce the finest image quality. Time after time after time. The excellent ink transfer results in superlative ink coverage Consistent Plate reproduction Predictable first stable dot predictable first printing dot Usually 50% faster Plate making process vs. solvent processes No drying required Less thickness tolerances AWP-DEF AWP-DEF Thickness / mm Har dness / Sho r e A K factor Resolution 175 lpi digital 1 98% 1 98% Isolated line / µm Isolated dot / µm The AWP DEF can be processed on a conventional exposure frame, the processing itself being made in a specifically designed aqueous washable processor from Asahi. The plate is exposed on the back to produce the desired relief depth and achieve maximum sensitivity to UV light. After removal of the protective film, the plate is imaged by digital imager with a commonly available laser. The Plate is then exposed, washed out, quickly dried, and finished by UVA and UVC to ensure the optimum properties of the print-ready plate. AWP DEF plates are compatible with commonly used UV, solvent- and water-based ink systems.

6 Photopolymers AFP SF/DSF Solid Polymer The AFP-SF/DSF is Asahi s medium hard plate for finest highlights combined with excellent ink transfer onto all substrates. Its optimized balance of surface tension, plate hardness and recovery behavior produces incomparably good ink coverage with low dot gain in the mid tones and brilliant highlights. This can be achieved at maximum printing speeds. The AFP-SF/DSF plate can be used for most flexographic applications. No matter what the application, the ASAHI AFP-SF/DSF elevates printing results to a new level of quality. The superb ink transfer and excellent resolution offer crucial advantages for quality-conscious printers. The product advantages in detail: The excellent ink transfer results in superlative solid coverage. The printability is particularly suitable for substrates that meet the ever increasing packaging cost quality ratio expectations Superbly balanced reproduction of large tonal areas, text and halftone elements The wide exposure latitude enables consistent results even under changing and difficult conditions Steep relief shoulders and very good intermediate depths allow printing reverse elements under difficult conditions High ozone resistance facilitates plate storage The plate s high flexibility makes it possible to print with small-diameter cylinders AFP-SF/DSF 1.14 AFP-SF/DSF 1.70 AFP-SF/DSF 2.54 Thickness / mm Hardness / Shore A K factor Resolution 120 lpi conventional Resolution 120 lpi digital AFP-SF/DSF % 1 95% 1 95% 1 95% 1 95% 1 95% 1 95% 1 95% Isolated line / µm Isolated dot / µm The AFP SF/DSF flexo plates can be produced in all Asahi AFP processing systems or corresponding processing equipment. The plate is exposed on the back to produce the desired relief depth and achieve maximum sensitivity to UV light. After removal of the protective film, the main exposure is carried out. When an AFP D(igital)SF type is used, the removal of the protective film is followed by laser imaging with a commonly available YAG, diode or fibre laser. Then the plate is exposed, dried and finished by UVC and UVA light to ensure the optimum properties of the print-ready plate. AFP SF/DSF plates feature excellent compatibility with commonly used UV, solvent- and water-based ink systems. After printing, the plates should be thoroughly cleaned. Direct exposure to sunlight and heat during storage is to be avoided.

7 Photopolymers AFP SH/DSH Solid Polymer Asahi s AFP-SH/DSH is a hard Flexo plate will satisfy the customers increased demands for excellent printing quality and high durability. The improved mechanical stability and very the excellent ink transfer behavior makes for longer printing time between cleaning intervals. Steep relief shoulders and good intermediate depths ensure excellent printing results from the very start. The AFP-SH/ DSH is primarily used in printing flexible packaging and labels. It s real strength, however, shows above all with jobs involving difficult tasks to be solved. No matter what the printing application may be required. The product advantages in detail: Superbly balanced reproduction of large tonal areas, text and halftone elements on film, foil and coated surfaces Short platemaking times and easy handling serve to improve quality and increase quantity The excellent tonal range improves the printing results Very good resistance to UV inks The wide exposure latitude facilitates consistent results even under changing and dif - ficult conditions Steep shoulder relief and very good intermediate depths allow printing reverse elements even under difficult printing conditions High ozone resistance facilitates plate storage AFP-SH/DSH 1.14 AFP-SH/DSH 1.70 AFP-SH/DSH 2.54 Thickness / mm Hardness / Shore A K factor Resolution 120 lpi conventional Resolution 120 lpi digital AFP-SH/DSH % 1 95% 1 95% 1 95% 1 95% 1 95% 1 95% 1 95% Isolated line / µm Isolated dot / µm The AFP SH/DSH flexo plates can be produced in all Asahi AFP processing systems or corresponding processing equipment. The plate is exposed on the back to produce the desired relief depth and achieve maximum sensitivity to UV light. After removal of the protective film, the main exposure is carried out. When an AFP D(igital)SH type is used, the removal of the protective film is followed by laser imaging with a commonly available YAG, diode or fibre laser. Then the plate is exposed, dried and finished by UVA and UVC light to ensure the optimum properties of the print-ready plate. AFP SH /DSH plates feature excellent compatibility with commonly used UV, solvent- and water-based ink systems. After printing, the plates should be thoroughly cleaned. Direct exposure to sunlight and heat during storage is to be avoided.

8 Photopolymers AFP SQ/DSQ Solid Polymer The AFP-SQ/DSQ Flexo plate satisfies the severest criteria of quality in printing corrugated board, solid board and heavy-duty bags. The surface unevenness of the printing material is compensated by the ideal shore hardness and the resilience characteristics of the AFP-SQ/DSQ plate. The plate s excellent calibration and its dimensionally stable polyester base sheet compliments the printing quality achievable with the AFP-SQ/DSQ. The wide exposure latitude of the AFP-SQ/DSQ plate ensures that image elements like tones and isolated lines are optimally anchored even with a relief depth of 3mm. At the same time, intermediate depths form evenly and the relief is produced with steep shoulders. In platemaking and printing, the AFP-SQ/DSQ plate can be relied on for: Low dot gain printing Excellent ink transfer Superb ink coverage Wide exposure latitude Optimum intermediate depths Steep relief shoulders High flexibility High mechanical resistance AFP-SQ/DSQ 2.84 AFP-SQ/DSQ 3.18 AFP-SQ/DSQ 3.94 Thickness / mm Hardness / Shore A K factor Resolution 120 lpi 3 95% 3 95% 3 95% conventional Resolution 120 lpi 2 95% 2 95% 2 95% digital Isolated line / µm Isolated dot / µm The AFP SQ/DSQ flexo plates can be produced in all Asahi AFP processing systems or corresponding processing equipment. The plate is exposed on the back to produce the desired relief depth and achieve maximum sensitivity to UV light. After removal of the protective film, the main exposure is carried out. When an AFP D(igital)SQ type is used, the removal of the protective film is followed by laser imaging with a commonly available YAG, diode or fibre laser. Then the plate is exposed, dried and finished by UVC and UVA light to ensure the optimum properties of the print-ready plate. AFP SQ /DSQ plates feature excellent compatibility with commonly used UV, solvent- and water-based ink systems. After printing, the plates should be thoroughly cleaned. Direct exposure to sunlight and heat during storage is to be avoided.

9

10 Processing Units

11 Pr ocessing Units Asahi AWP 2530 All-in-one-Processor Processor 2530 The new AWP 2530 processor is designed for the emerging demands of the packaging industry. The combination of processor and plate technology is engineered to deliver a far greater consistency in plate production and therefore in printing. At the same time the AWP 2530 processor provides an environmentally sound solution by using hydrocarbon free solvent within the plate making process. Main Features Back exposure, main exposure, wash out, drying and finishing in one processor Stainless steel body Hydrocarbon free solvent Integrated filtration system Maintenance alarms with user s parameter capabilities Benefits of Processing Easy to use process allows accurate reproduction of images Plate making time around 1 hour Processing temperatures below 45 C ensures perfect plate production with excellent dimensional plate stability Low odour plate production creates improved work room environment Maximum 635mm x 762mm Plate Thickness 1. 14mm and 1. 70mm Water consumption per plate 6 lit r es 2580mm x 1580mm x 1310mm (LxWxH)

12 Processing Units Asahi AFP 912 processing equipments System for Flexo Plate Making Combi Unit 912 HQ EDLF Exposure frame with temperature controlled bed. Automatic pneumatic lid. PLC control with color touch screen display. Light integrator for automatic compensation of UV output variation. Seconds and mj mode. Lamps temperature regulation. High and consistent UV output to guarantee plate exposure consistency. 4 drawers dryer. 1 drawer light finisher. All lamps driven with electronic ballast. 90 x 120 cm/ 36 x 48 inch 182 x 196 x 106 cm/72 x 77 x 42 inch 600 kgs Single Exposure 912 EHQ Exposure frame with temperature controlled bed. Automatic pneumatic lid. PLC control with color touch screen display. Light integrator for automatic compensation of UV output variation. Seconds and mj mode. Lamps temperature regulation. High and consistent UV output to guarantee plate exposure consistency. 90 x 120 cm/ 36 x 48 inch 182 x 196 x 106 cm/72 x 77 x 42 inch 450 kgs

13 Processing Units Asahi AFP 912 Processing equipments System for Flexo Plate Making Dryer 912 D Drying unit with 6 drawers. The unit consists of 3 dryers of 2 drawers each. Each dryer with separate heating system, blowers, control and regulation. Drawers closing system with magnetic sealing (no fume leakage). Large gap between drawer and frame for easy plate introduction. High airflow, consistent and uniform temperature. 90 x 120 cm/ 36 x 48 inch 173 x 146 x 108m/68 x 57 x 42 inch 500 kgs Light Finisher 912 LF Light finishing unit including UVA and UVC lamps. All lamps fitted with electronic ballasts. The unit can be placed on top of the 912 D dryer. High airflow exhaust system. 90 x 120 cm/ 36 x 48 inch 173 x 146 x 108m/68 x 57 x 42 inch 300 kgs Processor 912 DP Automatic flowline Processor with double hydraulic system to remove and separte digital black mask layer from washout solvent. Washout system with rotating brushes with double lateral oscillating movement. PLC control with touch screen display. Software with special maintenance program. Integrated Solvent heater/chiller. Solvent analyser. Includes 3 pin bars and punch. 90 x 120 cm/ 36 x 48 inch 170 x 382 x 97 cm/67 x 150 x 38 inch 1070 kgs

14 Processing Units Asahi AFP 1216 Processing equipments System for Flexo Plate Making Single Exposure 1216 EHQ Exposure frame with temperature controlled bed. Automatic pneumatic lid. PLC control with color touch screen display. Light integrator for automatic compensation of UV output variation. Seconds and mj mode. Lamps temperature regulation. High and consistent UV output to guarantee plate exposure consistency. 120 x 160 cm/47 x 63 inch 265 x 172 x 110 (open 238) cm/104 x 68 x 43 (open 94) inch 890 kgs Dryer 1216 D Drying unit with 6 drawers. The unit consists of 3 dryers of 2 drawers each. Each dryer with separate heating system, blowers, control and regulation. Drawers closing system with magnetic sealing (no fume leakage). Large gap between drawer and frame for easy plate introduction. High airflow, consistent and uniform temperature. 120 x 160 cm/47 x 63 inch 208 x 172 x 110 cm/82 x 68 x 43 inch 650 kgs Light Finisher 1216 LF Light finishing unit including UVA and UVC lamps. All lamps fitted with electronic ballasts. The unit can be placed on top of the 1216 D dryer. High airflow exhaust system. 120 x 160 cm/47 x 63 inch 208 x 172 x 33 cm/82 x 68 x 13 inch 320 kgs

15 Processing Units Asahi AFP 1321 Processing equipments System for Flexo Plate Making Single Exposure 1321 EHQ Exposure frame with temperature controlled bed. Automatic pneumatic lid. PLC control with color touch screen display. Light integrator for automatic compensation of UV output variation. Seconds and mj mode. Lamps temperature regulation. High and consistent UV output to guarantee plate exposure consistency. 132 x 203 cm/52 x 80 inch 336 x 210 x 105 (open: 260) cm/132 x 83 x 41 (open: 102 inch 1300 kgs Double Exposure 1321 ETL Exposure unit with hydraulic vertical opening lid. Double side exposure with automatic shutter. Lamps temperature control and regulation. Light integrator for automatic UV variation compensation for back and main exposure. 2 storage drawers. 132 x 203 cm/52 x 80 inch 305 x 221 x 119 (open: 200) cm/1120 x 87 x 47 (open: 79) inch 1400 kgs Double Exposure 1321 ESL Exposure unit with pneumatic shell opening lid. Double side exposure with automatic shutter. Lamps temperature control and regulation. Light integrator for automatic UV variation compensation for back and main exposure. 2 storage drawers. 132 x 203 cm/52 x 80 inch 305 x 221 x 119 (open: 200) cm/1120 x 87 x 47 (open: 79) inch 1400 kgs

16 Processing Units Asahi AFP 1321 Processing equipments System for Flexo Plate Making Dryer 1321 D Drying unit with 6 drawers. The unit consists of 3 dryers of 2 drawers each. Each dryer with separate heating system, blowers, control and regulation. Drawers closing system with magnetic sealing (no fume leakage). Large gap between drawer and frame for easy plate introduction. High airflow, consistent and uniform temperature. 132 x 203 cm/ 52 x 80 inch 250 x 165 x 110 cm/98 x 65 x 43 inch 750 kgs Light Finisher 1321 LF Light finishing unit including UVA and UVC lamps. All lamps fitted with electronic ballasts. The unit can be placed on top of the 1321 D dryer. High airflow exhaust system. 132 x 203 cm/ 52 x 80 inch 250 x 135 x 33 cm/98 x 73 x 13 inch 400 kgs Processor 1321 DP Automatic flowline processor with double hydraulic and tank system to allow separation of digital black layer from washout solvent. Unique washout brushing system with rotating brushes and double lateral alternate oscillating movment. PLC control with color touch screen display. Specific maintenance program in software. Integrated solvent heater chiller and solvent saturation analyser with automatic replenishment. 132 x 203 cm/52 x 80 inch 208 x 457 x 100 cm/82 x 180 x 41 inch 1340 kgs TM Graphic Arts