ATTENTION!! WHEN YOU SEE A WARNING! BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!

Size: px

Start display at page:

Download "ATTENTION!! WHEN YOU SEE A WARNING! BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!"

Meryl Rose
5 years ago
Views:

The KINGPIN BLIND This X-Stand product(s) has been tested to rigid

Safe operation and use of this X-Stand product(s) is the responsibility

Please read and follow all safe use instructions and warnings.

1 The KINGPIN BLIND This X-Stand product(s) has been tested to rigid industry standards. Safe operation and use of this X-Stand product(s) is the responsibility of the user(s). Please read and follow all safe use instructions and warnings. Failure to follow these may result in serious injury or death! First Edition, April 2017, Published by X-Stand TREESTANDS, Apple Valley Minnesota X-Stand TREESTANDS. All rights reserved.

2 ATTENTION!! WHEN YOU SEE A WARNING! BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! Please read and follow all instructions and warnings. Failure to follow these instructions may result in serious injury or death! WARNING! This product is. Failure to follow this warning may result in serious injury or death! WARNING! This product is for hunting purposes only! It is not to be used as a camping tent or for any other function. Failure to follow this warning may result in serious injury or death! WARNING! Do not use devices that produce fumes inside of blind. Vapors and fumes could result in carbon monoxide poisoning, serious injury, or death! WARNING! warning may result in serious injury or death! Failure to follow this WARNING! WARNING! Do not allow children to use this product without direct adult supervision. Failure to follow this warning may result in serious injury or death! XSQP846-B PARTS LIST Part # Description Qty XP XP XP XP XP Upper 4 XP Top Roof 2 XP Footrest 3 XP Female 7 XP Male 7 XP Horizontal Bar 2 XP Vertical Bar 2 XP Swivel Bar 1 XP Brace A 4 XP Brace B 4 XP XP Anchor 4 XP Rope 4 XP Canopy 1 XP Instruction Manual 1 XSQP846-B HARDWARE LIST Part # Description Qty XP /4" X 1 Hex Bolt 15 XP /4" x 1 1/4 Hex Bolt {B} 8 XP /4" x 1 1/2 Hex Bolt 44 XP /4" x 2 Hex Bolt 11 XP /4" x 3 Hex Bolt {E} 2 XP /4" x 3 1/4 Eye Bolt 4 XP /4 Nylock Nut 84 XP /4 Wiz Nut 4 XP Nylon Washer 2 XP /8" Nylon Washer 2 Check to make sure you have all the required parts and hardware. If you don t, call our customer service representatives at for replacement parts and hardware. If there are missing parts, you cannot assemble the product as designed. TIPS FOR INCREASING PRODUCT LONGEVITY Always store your blind in a cool dry place and make sure that your blind is completely dry and clean before storing in carrying bag. Never leave your blind outside for any longer than needed. This material may fade after long periods of time in direct sunlight. WARNING! Read all instructions and safety warnings and follow them thoroughly. Failure to follow these instructions may result in serious injury or death! 2 READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.

3 ATTENTION!! WHEN YOU SEE A WARNING! BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! WARNING! DO NOT over tighten the hardware. Over tightening can lead to structural damage and may negatively affect the performance of your blind. Failure to follow these instructions may result in serious injury or death! NOTE: All steps require that you temporarily finger tighten all nuts and bolts until instructed to tighten. This will ensure proper alignment during assembly. Most parts of this model are manufactured to be universal in use, so there may be some parts containing holes that will not be used for assembly. To minimize confusion in the assembly process, please read these instructions in entirety before beginning. STEP 1. Slide the stakes into the bottom pipes and secure using eight (8) 1/4" 1 1/4" hex bolts {B} and eight (8) 1/4" nylock nuts. (Fig. 1) FIGURE 1 STEP 2. Attach one (1) lower frame support between the brackets on one (1) stake using one (1) 1/4" 1 1/2" hex bolt and one (1) 1/4" nylock nut. Then, attach one (1) cross Brace A & B to each side of the lower frame support aligning the holes using one (1) 1/4" 1 1/2" hex bolt and one (1) 1/4" nylock nut. Next, attach the second hole of the cross brace A & B on the outside of the bottom pipes and secure using two (2) 1/4" 1 1/2" hex bolts and two (2) 1/4" nylock nuts. Repeat for remaining lower frame supports and cross braces A & B. (Fig. 2) FIGURE 2 Brace A Brace A Brace B Brace B Brace B Brace A Brace A Brace B READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT. 3

4 Upper Top Roof FIGURE 3 Upper Upper Top Roof Upper STEP 3. Slide the frame supports into the lower frame supports and secure using four (4) 1/4" 3 1/4" eye bolts, four (4) 1/4 wiz nuts and four (4) 1/4" nylock nuts. Then, slide the upper frame supports into the frame supports and secure using four (4) 1/4" 1" hex bolts and four (4) 1/4" nylock nuts. Next, slide the top roofs into the upper frame supports and secure using four (4) 1/4" 1" hex bolts and four (4) 1/4" nylock nuts. Attach the top roofs together by aligning holes using one (1) 1/4" 2" hex bolt and one (1) 1/4" nylock nut. (fig. 3) STEP 4. Slide the male shooting rails into the female shooting rails using seven (7) 1/4" Male Femaleale FIGURE 4A 4 READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.

5 FIGURE 4 Footrest Footrest Footrest STEP 5. Attach the footrests to the inside of lower frame supports using four (4) 1/4" 1 1/2" hex bolts and four (4) 1/4" nylock nuts. Then, attach eight (8) V-brackets to the outside of lower frame supports and frame supports using eight (8) 1/4" 1 1/2" hex bolts and eight (8) 1/4" nylock nuts. (fig. 4) STEP 6. Attach six (6) assembled shooting rails to the inside of V-brackets using twelve READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT. 5

6 FIGURE 5 Horizontal {E} Vertical Vertical Swivel Bar {E} Horizontal STEP 7. Attach the remaining assembled shooting rail to the inside of upper V-brackets using two (2) 1/4" 1 1/2" hex bolts and two (2) 1/4" nylock nuts. Then, attach the horizontal support bars to the inside of lower V- brackets using two (2) 1/4" 1 1/2" hex bolts and two (2) 1/4" nylock nuts. STEP 8. Attach the vertical support bars to the inside of front shooting rail using two (2) 1/4" 2" hex bolts and two (2) 1/4" nylock nuts. Then, attach the swivel bar to the left vertical support bar and horizontal support bar by aligning holes and secure using one (1) 1/4" 3" hex bolt {E}, two (2) nylon washers and one (1) 1/4" nylock nut. Next, attach the right vertical support bar to the horizontal support bar using one (1) NOTE: These next steps require two (2) adults for safe installation of the canopy. FIGURE 6 STEP 9. Remove the assembled four (4) 1/4" 3 1/4" eye bolts. Slide the fabric cover over the roof, pulling it down to the bottom pipes. Assure the zippered door is facing to the SWIVEL BAR. Then, secure the bottom of the canopy to the bottom pipes with the velcro. Next, attach the four (4) 1/4" 3 1/2" eye bolts back. NOTE: The 1/4" wiz nuts should be out of the Rope Anchor Rope Rope Anchor STEP 10. SECURELY TIGHTEN EVERY NUT AND BOILT AT THIS TIME. Anchor 6 READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.

7 STEP 11. With the help of another adult, lift the blind to the desired ground. Drive each stake into the ground until the bottom pipes touch the ground. Next, use four (4) anchors to secure the blind to the ground on all four corners, secure the eye bolts FIGURE 7 Bottom Pipe Bottom Pipe Bottom Pipe Foot Platform Bottom Pipe STEP 12. This blind can be used with the freestanding platform (XSQP846) also. Attach the bottom pipes to the foot platforms of XSQP846 using eight (8) 1/4" 2" hex bolts and eight (8) nylock nuts. (fig. 7) READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT. 7

This X-Stand product(s) has been tested to rigid industry standards. Safe operation and use of this X-Stand product(s) is the responsibility of the user(s).

8 This X-Stand product(s) has been tested to rigid industry standards. Safe operation and use of this X-Stand product(s) is the responsibility of the user(s). Please read and follow all safe use instructions and warnings. Failure to follow these may result in serious injury or death! First Edition, April 2017, Published by X-Stand TREESTANDS, Apple Valley Minnesota X-Stand TREESTANDS. All rights reserved.

Bale Blind. Model MGB6000 HARDWARE LIST PARTS LIST

Bale Blind. Model MGB6000 HARDWARE LIST PARTS LIST ale lind Model MG6000 Please read and follow all instructions and warnings. Failure to follow these instructions may result in serious injury or death! WRNING! This product is not fireproof. The fabric