PVB Prairie View Pontoon Fishing Trailer

Size: px

Start display at page:

Download "PVB Prairie View Pontoon Fishing Trailer"

Bruce Barber
5 years ago
Views:

1 PVB Prairie View Pontoon Fishing Trailer PVB Prairie View Pontoon Fishing Trailer Literature Bag - Trailers Frame Bundle - Pontoon Fishing Tongue - 3x3x14 ga. x Hardware Box - Pontoon Fishing *4.80x12B Tire / T-Silver Mod Rim *Check with your dealer/customer service representative for current tire/rim assembly part number. ShoreLand r offers its product line in painted finishes. When ordering parts, it is important that you specify the finish or color you have on your product. The 5-digit number along with a 2-digit space, note that the parts can be purchased in various finishes. PVB Specifications Capacity 1200 lbs. GVWR: 1560 lbs. GAWR: 1560 lbs. Ship Wt: 335 lbs. Frm Size: 1.5X3 (11 Ga) Tire Size: 4.80x12B Rim Size: 12 X 4 J Brake: N/A Coupler: 2 Coupler Suspension: 4 Leaf Slipper Springs Tongue Size: 3X3X7 Tongue 03...Black Midwest Industries, Inc. Ida Grove, IA Page 1 Rev A 06/14/2011

2 Midwest Industries, Inc. Ida Grove, IA Page 2 Rev A 06/14/2011

3 Side Marker Light Locate the side marker light holes on the side of the tongue. Mount the amber side marker light to the tongue using two #10 x 3/4 selfdrill screw. Refer to Detail B for placement. Repeat on other side of tongue. Safety Chain Insert a 3/8 X 1-1/4 hex bolt through a 3/8 flat washer, a safety chain and another 3/8 flat washer (in placement order). Proceed to insert this assembly into the lower hole on the front of the tongue. Secure with a 3/8 flange lock nut on the inside of the tongue tube. Refer to Detail A for placement. Repeat on other side of tongue. Coupler Mount the coupler to the top two holes on the front of the tongue. Using two 1/2 x 1 hex bolts in the first two holes on the coupler/ tongue, secure with 1/2 flange lock nuts on the inside of the tongue tube. The second hole on the tongue/coupler will be secured with a 1/2 x 4 hex bolt and 1/2 flange lock nut on the inside of the tongue tube. Refer to Detail A for placement. Tongue Stand Mount the tongue stand to the front under side of the tongue by inserting the key lock into the key hole. Turn tongue stand and align with front under side hole on the tongue. Place a 1/2 x 1 hex bolt up through the tongue stand/tongue and secure with a 1/2 flange lock nut on the inside of the tongue tube. Refer to Detail A for placement. Winch Mount the winch stand to the tongue in location that would best fit your watercraft. Secure with three 3/8 x 4 hex bolts and three 3/8 flange lock nuts. Mount the winch handle on the winch assembly using the hardware provided. Refer the parts drawing for placement. Springs Mount the leaf slipper springs to the top of the axle using two 3/8 x 2-3/16 x 2 square u-bolts. Secure with 3/8 flange lock nuts. Repeat on opposite side of axle. Refer to Detail F for placement. Axle Place one spring bushing into the rear of the spring bracket and secure with 1/2 x 3 hex bolt and 1/2 flange lock nut. Repeat on opposite side of the trailer. Position the axle under the frame, slide the slipper spring above the bushing. Raise the axle assembly up so that the front of the spring line up with the front spring bracket hole. Insert a 9/16 x 3-1/4 hex bolt and secure with a 9/16 hex lock nut. Repeat on other side of the trailer. Refer to Detail E and F. Do not overtighten. The springs must be able to react to road variances. FINAL ASSEMBLY INSTRUCTIONS Remove all banded items and the hardware bag from the frame. Remove the parts and sort by size. Tongue Locate the tongue and install by sliding it in the front of the tongue channel, continue to first crossmember as shown in Detail C. Insert a 3/8 X 4 carriage bolt from the top down into the front crossmember and tongue. Secure with a 3/8 flange lock nut. Insert another 3/8 X 4 carriage bolt through the side of the tongue change cap on the frame and into the tongue. Secure with a 3/8 lock nut. Tire & Wheel Assemblies Mount the tire and wheel assemblies using the 1/2 fine threaded tapered lug nuts provided. Tighten to ft/lb. of torque using the rotation pattern as shown in the ShoreLandr s Owners Manual. Re-torque the lug nuts after 50 miles of driving and then periodically thereafter. Tire Size and Carrying Capacity Chart Tire Size x 12B GVWR LB. Carrying Capacity LB. Axle...N/A Refer to the tire side wall for correct tire pressure. Midwest Industries, Inc. Ida Grove, IA Page 3 Rev A 06/14/2011

4 Midwest Industries, Inc. Ida Grove, IA Page 4 Rev A 06/14/2011

5 Midwest Industries, Inc. Ida Grove, IA Page 5 Rev A 06/14/2011

6 Bunk Mount the saddle brackets to the frame using 3/8 x 1-15/16 x 4 square u-bolts from the bottom side of the frame and up through the saddle bracket. Secure with 3/8 flat washers, 3/8 lock washers, and 3/8 hex nuts. Refer to Detail D for placement. Mount the bunk to the saddle brackets on the frame using 1/4 x 1-1/2 self-tapping screws. About 4 of the bunk will protrude out the back of the trailer, measuring from the taillight bracket. Assembly should be complete except for tightening some of the bolts. These bolts were left loose only to aid in adjusting the trailer to the boat. All bolts and nuts must be tightened before towing! NOTE: The law requires that the white ground wire on both the tongue wire harness and vehicle harness must be properly grounded to the trailer and vehicle frames. Midwest Industries, Inc. Ida Grove, IA Page 6 Rev A 06/14/2011

SS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E

SS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E Midwest Industries, Inc. Page 1 Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003231 REV A 1/25/05 Bundles