Varro Retractable Pleated Screen ST Installation: Face-Mount
|
|
- Joy Wilcox
- 5 years ago
- Views:
Transcription
1 Varro Retractable Pleated Screen ST Installation: Face-Mount Thank You For Purchasing A Slide Clear Pleated Screen System Please read the instructions thoroughly before installing your new screen system.
2 Required Tools and Materials Screwdriver and screw bit: - Phillips #2 -Robertson #1 Parts List Description Drawing Reference Top Track A Jamb Profile B Pull-Bar C Screw gun and drill Carpenters level or laser level Straight edge Base-Jamb Mount D Pencil Screen Cartridge E Cleaning cloth Degreaser or alcohol based cleaner Anchor Plate F Hand saw or chop saw Bottom Guide G Anchoring screws for the face-mount application Fixed Handle H Collapsible Handle I (12-15 screws) Drill bit to pre-drill holes for anchoring screws Mallet Dual-Central Stop (Dual-Central Screen Systems) J 3/8" Teks Screws: Robertson #1 K Face-Mount Extrusion L Face-Mount Corner Key M Screen Diagram 2
3 Installation 1. Ensure the Installation location is level and clean 2. Install the Face-Mount Option - Parts: L and M Pre-drill the countersunk groove on the face mount extrusion, every 2 (610mm) Assemble the face-mount frame using the three face mount extrusions and the two face mount corner keys Once assembled, place the face mount frame against the application. Position the frame where you would like your screen to operate Note: Ensure the face-mount frame is level and square Use a fastener that best fits the application to secure the face-mount frame to the application 3. Install the Top Track - Part: A Fasten the top track to the horizontal face-mount extrusion with the provided 3/8 Teks screws - Part: K 4. Dual Central Screen Configurations ONLY - Parts: J and K If you have ordered a dual-central screen configuration, you will be required to install a dual-central stop in the center of the top track Find the center of the top track and mark it with a pencil Fasten the D/C stop to the top track with the provided TEK screws - Part: K Note: Use the centerline in the top track as a guide when installing the D/C stop 5. Install the Jamb Profile - Part: B Find the center of the top track by measuring 7/8 (23mm) from either side of top track Use a straight edge or a laser to inscribe a line down the vertical surface Peel the backing off of the anchor plates for temporary positioning Align the center of the anchor plates with the inscribed line Note: Ensure that the anchor plates are evenly spaced Fasten the anchor plates to the inside surface with the provided 3/8 TEK screws - Part: K Insert the top of the jamb profile into the top track and then push the jamb profile into the anchor plates Note: The jamb can be fastened to either vertical inside surface depending on which direction you want the screen to operate - Left to Right: Install jamb profile on right side - Right to Left: Install jamb profile on left side Note: The jamb profile can be directly fastened to the inside surface with fasteners if required 6. Install the Base-Jamb Mount Part: D Install the base-jamb mount on the vertical surface opposite of the jamb profile that was installed in step #4 Insert the top of the base-jamb mount inside the top track and align the bottom of the jamb mount so it s level and square Fasten the base-jamb mount to the vertical surface with the provided 3/8 TEK screws Part: K 3
4 7. Install the Bottom Guide - Part: G Clean the bottom surface using a degreaser or alcohol based cleaner Align the bottom guide with the anchor plates, jamb profile and top track Temporarily position the bottom guide to ensure proper fitment, the bottom guide should fit under the magnet located in the jamb profile Note: Do not place the bottom guide underneath the jamb profile Note: The bottom guide may require additional cutting to fit the application Note: When connecting two lengths of the bottom guide connect the ends marked with a red line Note: When connecting two lengths of the aluminum bottom guide, use the provided joiners Once the bottom guide has been positioned, peel the backing off of the guide and press down on the bottom guide to ensure a secure bond Note: The bottom guide may not fully adhere in cold weather applications. It is recommended that the bottom guide adhesive is at room temperature before installation and that the bottom surface is clean and dry. In addition, the bottom guide can always be fastened to the bottom surface with a countersunk, flat head screw. 8. Install the Screen Cartridge - Part: E Insert the top of the screen cartridge into the top track Note: Be careful not to bend the steel band when inserting the screen cartridge into the top track Align the bottom of the screen cartridge with the bottom guide Snap the ST base jamb profile into the base-jamb mount by applying moderate horizontal force to the screen cartridge 9. Install Handles - Parts: H and I Find the knob on the rear of the handle Insert the knob into the groove in the pull-bar (C) at 90 degrees Adjust the handle to your desired height and turn the handle counter-clockwise until it snaps into place 10. After installing your screen system, repetitively extend and retract the screen to ensure a smooth operation. If you experience any one of the following problems, please refer to the trouble-shooting guide: The pull-bar does not completely close to the jamb The screen does not completely retract The screen does not operate smoothly 11. How to remove the screen cartridge Remove the screen cartridge from the base jamb mount Cut a piece of plywood or similar wood product to the following dimensions: 1-3/4 (45mm) wide x 6 (152mm) long Insert the piece of wood into the top track, beside the pull-bar retainer Spread the top track and remove the screen cartridge Note: Be careful not to bend the steel band when inserting the screen cartridge into the top track 4
5 Troubleshooting I have successfully installed my new Slide Clear pleated screen, but the screen does not fully extend? Occasionally during the shipping process the strings in the screen cartridge can become tangled. To un-tangle the wires, repetitively extend and retract the screen system until the screen fully extends. When retracting the screen system, use enough force to pull the wires free, but not to the point where the screen cartridge detaches from the base jamb mount. The chain on the bottom of the screen has come off of the bottom guide? The screen system is designed to allow the chain to come off of the bottom guide when a person, object or animal unintentionally hits the screen. If this situation occurs, simply place the chain back on the bottom guide. My Slide Clear pleated screen takes an unusually large amount of force to extend and retract, and is not running smoothly 1) If the tensioning strings going across the mesh are too tight, the screen will run rough and require an unusually large amount of force to move the pull-bar. See the adjustment instructions in the User s Manual to adjust the wire tension for your specific screen model. 2) Check the plastic chain that runs on the bottom of the screen for any debris. Use a vacuum cleaner, water hose and/or cloth to clean any debris out of the chain. My Slide Clear pleated screen does not fully retract? If your screen does not fully retract, the horizontal tensioning strings are too loose. The more tension you put on the strings, the better the pull-bar will fully retract. Caution: If you put too much tension on the strings the screen will not operate smoothly. See the adjustment instructions in the User s Manual to adjust the string tension for your specific screen model. My Slide Clear pleated screen does not extend parallel to the jamb profile? See the adjustment instructions in the User s Manual to adjust the parallelism for your particular screen model. The height of my opening has increased/decreased. Will my Slide Clear pleated screen still operate? Each screen system can tolerate a height fluctuation of 1/4 (6mm) downwards and 1/2 (14mm) upwards. If your rough opening is out more then these tolerances, your screen system will not operate safely. The width of the top track is more then the width of my opening? If the top track is wider then your opening you will be required to cut the top track and bottom guide. Use a chop saw or handsaw to cut top track and bottom guide to the correct width. The top track will equal the total width of the rough opening. The bottom guide will equal the total width of the rough opening less 3/4 (20mm). Note: Every Slide Clear pleated screen is manufactured to close 1/2 (12.7mm) past the total width of your opening. 5
6 Parallelism and Tension Adjustment ST Parallelism Adjustment: Use this adjustment when the pull-bar is not parallel with the jamb profile 1. Remove the plastic magnet holder and magnet from the pull-bar using a flat head screw driver. 2. Locate the white plastic adapter at the end of the steel band. 3. Loosen the #2 Philips screw that attaches the steel band to the white plastic adapter. 4. Adjust the parallelism by moving the steel band up and down on the white plastic adapter. Tighten the screw when the adjustment is complete. Note: This process may have to be repeated more then once to reach the desired level of parallelism. 5. To reinstall the plastic magnet holder and magnet, insert the magnet into the bottom cap on the pullbar by sliding it downwards. 6. Snap the magnet holder into the bottom half of the pull-bar. 7. Slightly bend the top half of the magnet holder too insert the magnet into the top cap on the pull-bar. 8. Once both ends of the magnet are inserted into the top and bottom caps on the pull-bar, clip the top half of the magnet holder into the pull-bar. 9. Double check the magnet holder is completely snapped into the pull-bar. 10. Fully extend and retract the screen system to ensure a smooth operation. ST Tension Adjustment: Use this adjustment when the screen does not operate smoothly or does not fully retract 1. Check the string tension by fully extending the screen system and gently pulling down on each string running across the mesh. 2. Each individual string has a tension screw located on the inside of the ST base jamb profile. Locate the screw for the particular wire and loosen it with a #2 Philips screwdriver. 3. The further away the screw is positioned from the screw, the more tension you will apply to the string. 4. Once you have found the correct tension for the string, tighten the screw. 5. This adjustment process can be done for each string running across the mesh. 6. Once all of the strings have the correct tension, fully retract and extend the screen system to ensure a smooth operation. If your screen requires further adjustment beyond these instructions please visit or contact the nearest Slide Clear service center for more information. 6
7 5 Year Limited Warranty Slide Clear Inc. (the Manufacturer) warrants that the VARRO Retractable Pleated Screen is supplied free of manufacturing defects and material flaws. Should any defect in materials and/or workmanship become apparent within five (5) years from the date of purchase, the Manufacturer will, at its option, repair or replace the product free of charge. WARRANTY CONDITIONS, EXCLUSIONS AND LIMITATIONS This Warranty is limited to defects in materials and workmanship and expressly excludes damage or defects caused by or arising from: Improper screen assembly, installation and/or adjustment provided by others. Damage as a result of environmental conditions, strong winds, natural disasters or other events beyond the control of the Manufacturer. Damage to the screen and all its components caused by deliberate or accidental misuse, abuse or neglect. Damage caused by humans or animals accidentally running or walking into the screen, when in use. Damage caused to the screen components by inadequate maintenance. General deterioration in appearance or performance that occurs as a result of normal operation and normal wear and tear. Progressive deterioration of finishes and materials due to exposure to sun, rain, abrasion, heat and/or cold. Damage caused by the contamination of the screen mesh due to excessive moisture, construction debris, and/or aggressive cleaning agents. The screen mesh is a woven material that is strictly checked for defects prior to and during production. Any square meter of mesh that contains three or less defects is considered acceptable and is not covered by this Warranty. Damage to the mesh caused by contact with excessive heat surfaces including, but not limited to construction equipment, cigarette ash, matches, cigarette lighters, sparks or hot cooking utensils. Damage caused by any third party. The Manufacturer s liability shall be limited to the repair or replacement (at the Manufacturer s option) of the defective product. The supplier will not be liable for any other direct or indirect costs, loss or damage to person or property, except as required by law, or any consequential losses or loss of profit. The Supplier excludes, to the extent permitted by law, all other warranties, whether expressed, implied or statutory. Shipping and handling is not included. This Warranty is not a promise of future performance. Your exclusive remedy shall be repair, replacement or refund as stated in this warranty. If we determine that a defect exists that is covered by this limited warranty, we will elect to either repair the product or component(s) or ship a replacement product or component(s) to the distributor or person making the warranty claim in the same condition as the product was originally sold, subject to our right to substitute a similar product when the product originally sold has been discontinued or modified. Slide Clear, in its sole discretion, may choose to repair the Product as an option to replacement in full satisfaction of its warranty obligation. If we are unable to provide replacement and repair is not practical or cannot be made timely, then we may elect to refund the purchase price paid directly to us if the Warranty applies. The Warranty on any replacement Product will extend for the balance of the original Warranty period. It is the Purchaser s sole responsibility for determining whether a Product purchased from us is suitable for an end user s needs or application. All visible defects must be reported before installation and finishing. Claims under this Warranty must be made within the specified warranty period and within thirty (30) days of the appearance of a defect. Failure to report defects to us, as specified under the Procedure for Warranty Claims section, will void all express Warranties. Failure by the Purchaser or end user to follow the installation and maintenance contained within this Warranty required shall void any and all express Warranties. This Warranty shall be interpreted, construed and applied under the laws of the Province of British Columbia, Canada. All disputes under this Warranty shall first be decided by mutually agreeable mediator, with each side to bear its own fees and costs. If the dispute is not resolved through mediation, the dispute shall be submitted to a mutually agreeable arbitrator, pursuant to the arbitration rules of the Province of British Columbia, Canada. The prevailing party to any claim filed under this limited Warranty is entitled to reasonable attorney s fees, expert s fees and costs. Slide Clear is entitled to attorney s fees, expert fees and testing fees regarding any dispute over the installation of its Product. This express limited Warranty sets forth our maximum liability for our products. No one is authorized to modify or expand this express limited Warranty. The absolute limit of our liability is the product purchase price from Slide Clear. We shall not be liable for special, indirect, consequential, incidental, or punitive damages of any kind and all such claims are waived to the fullest extent permitted by applicable law. Your sole or exclusive remedy with respect to any and all losses and damages resulting from any cause whatsoever as specified herein. All Slide Clear products are sold as is and as such Slide Clear disclaims any and all implied Warranties. We make no other Warranty or Guarantee; either express or implied, including implied Warranties of merchantability and of fitness for a particular purpose to the original purchaser or to any subsequent user of the product, except as expressly contained herein. The entire risk as to the quality and performance of the goods is with the Buyer. In the event state or provincial law precludes exclusion or limitation of implied Warranties, the duration of any such Warranties shall be no longer than, and the time and manner of presenting any claim thereon shall be the same as, that provided in the express Warranty stated herein. 7
8 COASTAL REGIONS Slide Clear Inc. standard and custom 2604 aluminum paint finishes are Warranted for a period of ten (10) years against defects resulting in cracking, peeling and other loss of adhesion. If any Slide Clear product has been operated and/or installed in a coastal environment (within three (3) miles/five (5) kilometers of a seacoast or salt water), the standard or custom 2604 aluminum paint finish will be Warranted for a period of one (1) year. Anodized finishes are Warranted for a period of three (3) years unless the Slide Clear Inc. product has been operated and/or installed in a coastal environment (within three (3) miles/five (5) kilometers of a seacoast or salt water), the anodized finish will be Warranted for a period of one (1) year. CARE AND MAINTENANCE Regular Maintenance and Cleaning is imperative to prolong the screen s smooth operation and longevity. The screen mesh should be lightly cleaned, on a monthly basis, to maintain an unobstructed view and airflow. While the screen is extended, remove any build up with a vacuum cleaner with a soft brush nozzle or a duster. Take extreme caution to not tear or rip the screen mesh. We do not recommend using any type of cleaning agent on the screen mesh as this may cause unintentional deterioration. It is also recommend that you clean the wheels on the bottom of the pull-bar with compressed air, on a monthly basis. This is to ensure that no debris is effecting the operation of the screen system. To clean the wheels, retract the screen and remove the screen cartridge. Place the screen cartridge on a large clean table, as to not cause any damage to the coating, and blow out the bottom of the pull-bar with compressed air. After you have cleaned the wheels, re-install the screen cartridge. To help prevent any future damage, always keep the bottom guide clean and clear of debris. WIND OPERATION On large openings the screen mesh acts like a sail when there are gusty or windy conditions present. In gusty or windy conditions it is recommended to keep the screen retracted to reduce the possibility of any resulting damage. Damage as a result of exposure to wind is not covered under this Warranty. INSTALLATION AND MAINTENANCE REQUIREMENTS All Slide Clear Inc. products must be stored, installed, maintained, repaired, and used in accordance with acceptable good trade practice and the supplied instructions, in order to prevent damage and maintain your Warranty. PROCEDURE FOR WARRANTY CLAIMS Please inspect your order immediately upon receipt. If you have a problem, immediately upon discovery contact the Distributor or Dealer from whom you purchased our product, or contact us directly. Mailing Address: Slide Clear Inc Avenue Surrey, BC Canada V3Z-3S9 Phone: info@slideclear.com Please provide the following information with your Warranty claim: a) Slide Clear order number b) Date and location of purchase c) Contact information d) Address of where the product can be inspected e) Description of the problem and the product (including photographs) All visible defects must be reported before installation and finishing. Claims under these Warranties must be made within the specified Warranty period and within sixty (60) days of the appearance of a defect. We may charge a fee for on-site product inspections, however this fee will be refunded if the product is found to contain a defect covered by this Warranty. 8
Varro Retractable Pleated Screen ST Installation: Inside-Mount
Varro Retractable Pleated Screen ST Installation: Inside-Mount Thank you for purchasing a Slide Clear Pleated Screen System Please read the instructions thoroughly before installing your new screen system.
More informationInstallation Operation Care
Installation Operation Care Designer Roller and Designer Screen Shades Standard and Cassette Cordless Lifting System CONTENTS Getting Started: Product Views... 1 Tools and Fasteners Needed... 3 Installation
More informationBasic Spring Motor Roller Shades
Basic Spring Motor Roller Shades ATTENTION!!! READ CAREFULLY! This shade has a reliable long-lasting Spring Motor. The Spring Motor must have proper tension in order to function as intended. Handling in
More informationHorizontal Shadings. Installation & Operating Instructions
Horizontal Shadings Installation & Operating Instructions TABLE OF CONTENTS Getting Started: Mounting Types...3 Installation Components...3 Tools and Fasteners Needed...4 Product View...5 Installation:
More informationInstallation Operation Care. Duette Honeycomb Shades EasyRise Lifting System
Installation Operation Care Duette Honeycomb Shades EasyRise Lifting System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3 Mount the
More informationInstallation Operation Care
Installation Operation Care Duette Honeycomb Shades UltraGlide Lifting System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3 Mount
More informationComfort 10S Wall Hardwire Installation and Operations Manual
Comfort 10S Wall Hardwire Installation and Operations Manual 10/24/2012 REQUIRED TOOLS STARHEAD SCREWDRIVERS DRILL & BIT FLAT HEAD SCREWDRIVERS ALLEN KEY PENCIL MEASURING TAPE LEVEL ELECTRICAL REQUIREMENTS:
More informationInstallation Operation Care
Installation Operation Care Designer Banded Shades Cassette with Custom Clutch and UltraGlide CONTENTS Getting Started Product View Custom Clutch... 1 Product View UltraGlide... 2 Tools and Fasteners Needed...
More informationInstallation Operation Care. Solera Soft Shades EasyRise, UltraGlide, and LiteRise Lifting System
Installation Operation Care Solera Soft Shades EasyRise, UltraGlide, and LiteRise Lifting System CONTENTS GETTING STARTED Product Views...1 Tools and Fasteners Needed...3 INSTALLATION Installation Overview...4
More informationInstallation Operation Care
Installation Operation Care Applause Honeycomb Shades LiteRise Operating System with TrimKit Contents GETTING STARTED Product View... 1 Tools and Fasteners Needed... 2 INSTALLATION Installation Overview...
More information340 & 350 SERIES BATH ENCLOSURES
INSTALLATION INSTRUCTIONS 340 & 350 SERIES BATH ENCLOSURES 800-643-1514 www.alumaxbath.com Copyright Alumax Bath Enclosures 2010. All rights reserved. LIMITED WARRANTY AND REMEDY ALUMAX BATH ENCLOSURES
More informationBASIC TOOLS AND MATERIALS NEEDED. Introduction HOW TO CARE FOR YOUR DOOR
DO IT RIGHT! Use a Kohler Certified Installer, (KCI), for the installation of your Kohler Shower Door. Contact your Kohler Distributor/Showroom or call Kohler at 1-800-4-KOHLER for the KCI nearest you.
More information340 & 350 SERIES DELUXE FRAMELESS BYPASS
BATH ENCLOSURES An Alcoa Company Tel: 800-643-1514 Fax: 870-234-3181 www.alumaxbath.com INSTALLATION INSTRUCTIONS 340 & 350 SERIES DELUXE FRAMELESS BYPASS BATH ENCLOSURES Copyright Alumax Bath Enclosures
More informationInstallation Operation Care
Installation Operation Care Applause Honeycomb Shades LiteRise Operating System Contents GETTING STARTED Product View...1 Tools and Fasteners Needed...2 INSTALLATION Installation Overview...3 Mount the
More informationInstallation Operation Care. Sonnette Cellular Roller Shades. LiteRise Operating System
Installation Operation Care Sonnette Cellular Roller Shades LiteRise Operating System CONTENTS GETTING STARTED: Product View...1 Tools and Fasteners Needed...2 INSTALLATION: Installation Overview...3 Mount
More informationPhone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels
Phone # 800-440-8785 www.lajolladoors.com La Jolla Doors Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Thank you for choosing La Jolla Doors In this manual you will
More informationInstallation Instructions For Custom Roman Shades
Roman Shade Installation Guide Installation Instructions For Custom Roman Shades Step 1. Check Package Contents Missing part? Call 800-264-1190 Mounting hardware kit includes the following: Part Quantity
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationInstallation Instructions:
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. (SB76904) Parts Included Qty 94-241CA001 Front Upright: Drvr 1 94-241CA002 Front Upright: Pass 1 94-241CA003
More informationINSTALLATION GUIDE CABINETRY
INSTALLATION GUIDE CABINETRY The instructions given here serve as general guidelines on how to install full-access cabinets in a reasonably simple installation. Many cabinet designs and installations may
More informationTilting, Swiveling & Rotating Flat Panel Wall Mount
Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical
More informationReady-To-Assemble VersaRail INSTALLATION INSTRUCTIONS
Ready-To-Assemble VersaRail INSTALLATION INSTRUCTIONS Read all instructions prior to installing product. Refer to manufacturers safety instructions when operating any tools. To register your product, please
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS AXIS 7 x 8 CURVED SHOWER DOOR MODEL: AM88A00 SERIES Thank you for selecting American Standard the benchmark of fine quality for over 00 years. To ensure this product is installed
More informationOwner s Manual LSP38 38 Lawn Sweeper
Owner s Manual LSP38 38 Lawn Sweeper Manual Contents Safety Instructions Assembly Operation Maintenance Parts Warranty 2 4-13 2 11 14-15 16 Your Lawn Sweeper Congratulations on your purchase of a new Precision
More informationOwner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts.
Owner s Manual ODYSSEY BENCH MODEL O4100B shown 67-1375 REV 218 3730 E. Southern Avenue, Phoenix, AZ 85040 USA 800-778-8779 Workhorseproducts.com 1 Table of Contents I. Introduction & Safety Information.
More information694 SERIES NEO-ANGLE PIVOT SHOWER ENCLOSURE
BATH ENCLOSURES An Alcoa Company Tel: 800-643-1514 Fax: 870-234-3181 www.alumaxbath.com 694 SERIES NEO-ANGLE PIVOT SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS Copyright Alumax Bath Enclosures 1996. All
More informationInstallation Operation Care
Installation Operation Care Duette Honeycomb Shades LiteRise Lifting System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3 Mount the
More informationK ARICA ROUND SHOWER ENCLOSURE
K-7050 ARICA ROUND SHOWER ENCLOSURE 1. BEFORE YOU BEGIN HOW TO USE THESE INSTRUCTIONS Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation
More informationVista SCREEN. Installation Manual for. For left hinged doors. Quick and Easy to Size and Install
Installation Manual for Vista SCREEN For left hinged doors Quick and Easy to Size and Install Durable. Reliable. Attractive. For door openings up to 36 (914mm) wide and 81 3 /16 (2,062mm) high QC03-0512L
More informationInstruction Sheet REB SERIES. Rotating Sliding Base REB18
Instruction Sheet REB SERIES Rotating Sliding Base REB14 REB18 THANK YOU Thank you for purchasing the REB Series Rotating Sliding Base. Please read these instructions thoroughly before installing this
More informationInstallation Operation Care
Installation Operation Care Provenance Woven Wood Shades Standard Cordlock CONTENTS Getting Started: Product View...1 Tools and Fasteners Needed...2 Installation: Installation Overview...3 Mount the Standard
More informationVista SCREEN. and Double Door Link Kit. Installation Manual for. For Double Doors (French Doors) Quick and Easy to Size and Install
and Double Door Link Kit Installation Manual for Vista SCREEN TM Quick and Easy to Size and Install For Double Doors (French Doors) Durable. Reliable. Attractive. For door openings up to 72 13 /16 (1,849
More informationQWALL TUB TUB ACRYLIC BACK WALL INSTALLATION INSTRUCTIONS
QWALL TUB TUB ACRYLIC BACK WALL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical
More informationINSTALLATION INSTRUCTIONS TOOLS YOU WILL NEED GETTING STARTED
INSTALLATION INSTRUCTIONS HONEYCOMB SHADES TOP-DOWN, MOVABLE ARCH Thank you for your purchase. This shade has been custom built for you from the highest quality materials. To avoid errors and save valuable
More informationProLine PL60 - PL70 - PL80 RETURN PANEL SUPPLEMENT
INSTALLATION INSTRUCTIONS ProLine PL60 - PL70 - PL80 RETURN PANEL SUPPLEMENT Copyright Alumax Bath Enclosures 2013. All rights reserved. G03000000 7-1-13 Three-Year Limited Residential Warranty Alumax
More information3M Impact Protection Profile Installation System Instructions
3M Impact Protection Profile Installation System Instructions IMPORTANT: READ INSTRUCTIONS FOR USE BEFORE OPERATING Intended Use: The 3M Impact Protection Profile Installation System is for installing
More informationVeranda Decorative Lattice & Deck Skirting Special Order Catalog
Veranda Products. Built by Barrette. Veranda Decorative Lattice & Deck Skirting Special Order Catalog NEW! Designer Series Deck Skirting in 4 styles V1 2/17 1 Your Decorative Lattice Options Choose the
More informationautomatic embosser & die cutter USER MANUAL
TM TM automatic embosser & die cutter USER MANUAL CREATE A BEAUTIFUL LIFE IN THE BOX Cut n Boss machine (7) Embossing Folders (12) Cutting Dies Platforms (2) (1) Platform B (1) Platform D Magnetic Shim
More informationInstruction Sheet D-CPU. Secure CPU Holder
Instruction Sheet D-CPU Secure CPU Holder I-00457 Rev A PARTS LIST NOTE: Select Security Components when a more secure application is desired. Mounting Track with Mounting Tape Security Bracket Assembly
More informationMAXIMIST HVLP TANNING SYSTEM
L0941 12 10:Layout 1 16/12/10 09:03 Page 1 MAXIMIST HVLP TANNING SYSTEM DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please read these instructions
More informationTauten Tab Tension Screen User Manual
Tauten Tab Tension Screen User Manual Thank you for choosing a Tauten Series Tab Tension screen by Cirrus Screens. Please read through this user manual and understand all instructions before installing
More informationOne Shelf, Wall Mounted A/V Component Stand Installation Guide Model: EX101SS
One Shelf, Wall Mounted A/V Component Stand Installation Guide Model: EX0SS For technical assistance or troubleshooting please call -855-994-3832. This product is intended for use only with Audio/Video
More informationInstallation Operation Care
Installation Operation Care Provenance Woven Wood Shades Standard Cordlock CONTENTS Getting Started: Product View...1 Tools and Fasteners Needed...2 Installation: Installation Overview...3 Mount the Standard
More informationStop! Read This Important Information.
Stop! Read This Important Information. Stop, Do Not Proceed, Read This This door replacement kit is designed for the replacement of doors on a Supertop ONLY! This door will not work on any other style
More information1300-lb Furniture and Crate Movers
1300-lb Furniture and Crate Movers Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationVanity top, faucet and drain not included. 1-3/8 screws (x 2) (for middle and bottom drawers) Knobs (x 5)
ASHWELL VANITY BASE INSTALLATION INSTRUCTIONS Nutmeg models: 30176, 30177, 30178, 30179 Dark chocolate models: 30183, 30184, 30185, 30186 Gray models: 30190, 30191, 30192, 30193 Matte white models: 30197,
More informationInstallation Operation Care
Installation Operation Care Duette and Applause Honeycomb Shades Cordless Sidelight Shades CONTENTS Getting Started: Product View...1 Tools and Fasteners Needed...2 Installation: Installation Overview...
More informationIMPORTANT: One Corner Entry Shower Door requires two cartons.
IMPORTANT: You should check with your local plumbing or building code agency about this product for compliance before it is installed. IMPORTANT: One Entry Shower Door requires two cartons. 95302-2-AB
More informationInstallation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays
Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502
More informationManual Carton Closing Staplers
Operator s Manual Manual Carton Closing Staplers SHB00-A Item No. 6400 -/8" Crown Carton Closing Stapler 5/8" and /4" (5mm and 8mm) Ask for Genuine INTERCHANGE A58 and A4 Staples SHB50-C Item No. 640 -/4"
More informationFletcher F-3000 / F-3100 Accessory Laser Kit
Fletcher F-3000 / F-3100 Accessory Laser Kit Shown Assembled on F-3000 Machine Product Warranty The Fletcher-Terry Company warrants the product purchased to be free from defects in parts and workmanship
More informationInstruction Sheet. VRS Series. Vertical Rackmount system for multiple cable/satellite receivers
Instruction Sheet VRS Series Vertical Rackmount system for multiple cable/satellite receivers THANK YOU Thank you for purchasing the VRS Vertical Rackmount System. Please read these instructions thoroughly
More informationthe slim retracting clothesline product manual
&6 the slim retracting clothesline product manual for 4 and 6-line models HLS0046_4-6 line_owners Manual_v6.indd 1 2 Introduction Congratulations Congratulations on the purchase of your new Hills slim
More informationINSTALLATION INSTRUCTIONS ROLLER SHADES
INSTALLATION INSTRUCTIONS ROLLER SHADES Tools Required: Tape measure, pencil, drill, drill bits, screw driver, step stool or ladder. Note: use a 5/64 drill bit to pre-drill the screw holes (for attachment
More informationMANCHESTER VANITY BASE
MANCHESTER VANITY BASE INSTALLATION INSTRUCTIONS Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday or e-mail: contactus@magickwoods.com. Models:
More informationSIMPLEX ELITE MAT CUTTER
INSTRUCTION MANUAL MODEL 750-1 / 760-1 SIMPLEX ELITE MAT CUTTER INSTRUCTIONS AND OPERATION MANUAL 40 in (101 cm) mat cutting system with bevel & straight cutters, production stops, 27 in (68 cm) squaring
More informationHorizontal Mezzanine Gate
Horizontal Mezzanine Gate Installation Manual Models MGHM MGHE Table of Contents Product Information...2 Parts As Shipped...3 Installation Instructions...4 Warranty Information...4 PS DOORS Contact Information
More informationPlease Do Not Return This Product To The Store!
MODEL NOS. T8512 TOURNAMENT SERIES 3 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step. 2. Some smaller parts
More informationLuxus Deluxe ScreenWall
Luxus Deluxe ScreenWall Owner s Manual EZ Mount Bracket System Wall Mount Boards Stage Fly (Hanging) Mount T-Stand (Self-Supporting) Aperture Mount SWS-0716 TO THE INSTALLER: BE SURE TO LEAVE THIS MANUAL
More informationTension Control Clutch Model TCC-7
AIR CHAMP PRODUCTS User Manual Tension Control Clutch Model TCC-7 (i) FORM NO. L-20176-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained
More informationYour Performance Partner
Assembly Instructions Attic Storage System Your Performance Partner CONTENTS Safety Precautions.................................. 2 Warranty.......................................... 2 Important User Information............................
More informationAssembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C2 02/2013
More informationTETRA SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS
TETRA SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More informationHalf Door Installation Instructions
Half Door Installation Instructions For: CJ5 (1955-1975), CJ6 (All), M38-A1 (1955-1971) Part Number: 53025 Congratulations on your purchasing decision. Bestop designed these Doors to give you years of
More informationWoodTrac Direct Mount Ceiling System
WoodTrac Direct Mount Ceiling System Assembly Instructions All product is Class C rated and some product is available Class A rated. Check the ordering information to obtain the class rating for your product.
More informationInstallation Operation Care
Installation Operation Care Alustra Woven Textures Traditional Roman Shades Cordlock Lifting System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Mounting Types and Window
More informationINSTALLATION GUIDE OUTDOOR CABINETRY
INSTALLATION GUIDE OUTDOOR CABINETRY BEFORE YOU BEGIN IMPORTANT NOTES Always wear gloves and safety glasses when handling and installing aluminum cabinetry. Patio surfaces are typically uneven and may
More informationProLine PL80 HEAVY FRAMELESS BYPASS BATH ENCLOSURE
INSTALLATION INSTRUCTIONS ProLine PL80 HEAVY FRAMELESS BYPASS BATH ENCLOSURE Copyright Alumax Bath Enclosures 2013. All rights reserved. G03980849 5-1-13 Three-Year Limited Residential Warranty Alumax
More informationMortising Attachment
Mortising Attachment Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationInstallation Operation Care
Installation Operation Care Provenance Woven Wood Shades Standard Cordlock CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3 Mount the
More informationInstallation Instructions
Installation Instructions To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. P r o d u c t s Luxury Faucets and Accessories Jean Nouvel Product
More informationFletcher-Terry Titan Series Rotary Trimmers
Fletcher-Terry Titan Series Rotary Trimmers Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com OWNER S MANUAL Fletcher Titan The Fletcher-Terry Company 65 Spring Lane
More informationInstallation Instructions
Articulating Hex Monitor Mount Stand Installation Instructions UNPACKING Carefully open the carton, remove contents, and place them on a protected surface to avoid damage. Check the parts and the Supplied
More informationTilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040
Tilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040 20-40 66 lbs. Supports VESA sizes up to: 200x200 For technical assistance or troubleshooting please call 1-855-994-2825 or visit
More informationModels 2230 and 2240
Models 2230 and 2240 Overview... 2 Tools Needed... 2 Hardware...3 Assembly... 4-13 Installation... 14 Drawer Removal... 15 Operation... 15 Maintenance... 15 Accessories... 16 Limited Warranty... 16 Perform
More informationInstallation Operation Care
Installation Operation Care Duette and Applause Honeycomb Shades SkyLift Lifting System with Manual Operation CONTENTS Getting Started: Product View... 1 Tools Needed... 2 Assembly: Arrange the Shade Components
More information738 SERIES PIVOT SHOWER DOOR
INSTALLATION INSTRUCTIONS 738 SERIES PIVOT SHOWER DOOR Copyright Alumax Bath Enclosures 1997. All rights reserved. Page 1 of 8 LIMITED WARRANTY AND REMEDY Alumax Bath Enclosures warrants to its dealers,
More informationSpecifications. Important Safety Information
Specifications Tire Rim Capacity 4 to 12 Rim Height 16 (2) Bead Breaker Handles 21 Long Includes Aluminum Centering Cone (2) Nylon Spacers Important Safety Information 1. Do not exceed max. tire capacity.
More informationROBERN PLM 3 DOOR BATH CABINET INSTRUCTIONS GENERAL NOTES FOR MODELS PLM3030 & 3630
ROBERN PLM 3 DOOR BATH CABINET INSTRUCTIONS GENERAL NOTES FOR S & 3630 1. UNPACK THE CABINET. CHECK THE BOX THOROUGHLY FOR ALL HARDWARE AND LOOSE PARTS PACKED AS FOLLOWS: A. CABINET B. HARDWARE BAG C.
More informationTilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM
Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS AXIS 7x6 CURVED SHOWER DOOR MODEL: AM66A00 SERIES Thank you for selecting American Standard the benchmark of fine quality for over 00 years. To ensure this product is installed
More informationInstallation Instructions Cage Kit JK Unlimited (4-Dr) Part # 76902
Please read instructions entirely before installing this product. Drilling is required to install this part. Parts Included Qty Parts Included Qty Driver Front Upright 1 Pass Side Drill Template (7289)
More informationSunset Swings By Health in Motion, LLC
Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 11/6/2009 421 Owners Assembly and Operation
More informationVertical Honeycomb Shades
Step by Step Installation Instructions Vertical Honeycomb Shades Customer Service 800.248.8888 or visit us online at smithandnoble.com Thank you for purchasing from Smith+Noble. Your new shades have been
More informationMIRAGE SHOWER DOOR & TUB DOOR INSTALLATION INSTRUCTIONS
MIRAGE SHOWER DOOR & TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the rights to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical
More informationINSTRUCTION BOOK FOR. IDEA Screen & Panoramic for Nureva Span
INSTRUCTION BOOK FOR IDEA Screen & Panoramic for Nureva Span Disclaimer Milestone and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete.
More informationInstallation Instructions Replacement Top (Part # ) Unlimited (4 Door) Replacement Top (Part # ) JK (2 Door)
NOTE: Read entire instructions thoroughly before installing this product. It is recommended to install this Top when temperatures are above 70 degrees. The top can contract and stretch an inch or more.
More informationInstallation And Care Instructions. Vertical Honeycomb Shades
Installation And Care Instructions Vertical Honeycomb Shades Rev 5/2013 Table Of Contents Getting Started... 3 Parts Overview... 4 Materials Required... 5 Tools Required... 6 Outside Mount Installation...
More informationInstallation Operation Care
Installation Operation Care Vignette Modern Roman Shades Arches and Angles CONTENTS Getting Started: Mounting Types And Window Terminology... 1 Installation Components Needed... 1 Tools And Fasteners Needed...
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More information300C6 CONTINUOUS HINGE SEMI-FRAMELESS DOOR KIT
300C6 CONTINUOUS HINGE SEMI-FRAMELESS DOOR KIT LIMITED WARRANTY AND REMEDY Alumax Bath Enclosures warrants to its dealers, customers, and all subsequent purchasers and users, that the products supplied
More informationCRD 410 MANUAL FITTING INSERTER
CRD 410 MANUAL FITTING INSERTER OPERATIONS MANUAL VERSION 1.2 LAST EDITED 05.01.2018 cleanroomdevices.com 1 Table of Contents Title Page 1 Table of Contents 2 1.0 General Product & Safety Information...3
More informationLEVOLOR. Sheer Shadings. Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE
LEVOLOR Sheer Shadings Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE INSTALACIÓN FUNCIONAMIENTO CUIDADO INSTALLATION FONCTIONNEMENT ENTRETIEN Sistema operativo sin cordón Système sans
More informationSonoma Outdoor Kitchen Pergola. Assembly Instructions
Sonoma Outdoor Kitchen Pergola Assembly Instructions Introduction Thank you for your purchase from The Outdoor GreatRoom Company. This pergola has been engineered and manufactured in the USA. This user
More informationUser Manual. Where Imagination Meets Innovation. FRESH AERO Easy Seat Tool For Grumman AA1 & AA5 Series Aircraft
FRESH AERO Easy Seat Tool For Grumman AA1 & AA5 Series Aircraft Alpha Model For Grumman AA-1 & AA-5 Series Aircraft with Access Holes in Front Seat Buckets User Manual The Steelebrook Group Where Imagination
More informationINSTALLATION AND CARE INSTRUCTIONS
INSTALLATION AND CARE INSTRUCTIONS Vertical Applications Honeycomb Shades 52 C8-10-3401 Rev 2/14 CONTENTS Introduction...2 Before You Begin...3 Vertical Application Parts Overview...4 Materials Required...5
More informationPLM CABINET AND MTL LIGHT INSTRUCTIONS
Robern 701 N. Wilson Ave. Bristol, PA 19007 800.877.2376 PLM CABINET AND MTL LIGHT INSTRUCTIONS General Notes 1. Unpack the cabinet. Check the box thoroughly for all hardware and loose parts as follows:
More informationInstallation Instructions Hard Top Part # , Wrangler 2 & 4 Door
Please read instructions entirely before installing this product. This accessory is designed and manufactured primarily to augment the vehicles appearance and to protect the occupants from normal weather
More informationAccess Hatch. Installation Instructions and Operators Manual. PS DOORS Contact Information. Model AH-710 Standard High Neck Radius Cut
Access Hatch Installation Instructions and Operators Manual Standard Low Profile Frame Model AH-710 Standard High Neck Radius Cut High Neck Frame for special applications. Table of Contents Warranty Information...2
More informationGB-AVSTOR5 Ceiling Equipment Storage Box with Pipe Coupler
Ceiling Equipment Storage Box with Pipe Coupler INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9534-500-021-00 Contents Weight Limit... 2 Warning Statements... 2 Installation Tools...
More information