HAND TOOLS. 30m Metal Chalk Line Reel. Cold Chisels. 30m Replacement Chalk Lines. Alloy Cold Chisels - Premium. FatMax Xtreme Chalk

Transcription

1 HAND TOOLS chisels - cold 30m Metal Chalk Line Reel Durable, heavy-duty die cast body for extra long life. Long wearing felt gasket. Can be used as plumb bob. : m Replacement Chalk Lines High quality replacement line, 100 ft. (30m) on reel. : For Xtreme chalklines use item: : Cold Chisels Description Size Cold Chisel 150mm x 12mm Cold Chisel 175mm x 16mm Cold Chisel 200mm x 19mm Cold Chisel 230mm x 22mm Cold Chisel 250mm x 25mm FatMax Xtreme Chalk Available in Red and Black, 8oz or 5lb bulk. Waterproof chalk snaps longer lasting lines on wet surfaces. Description Size Red 8oz/227g Black 8oz/227g Red 5lb/2.27kg Black 5lb/2.27kg Stanley Chalk Refills High grade non permanent chalk. Packed in plastic canisters with easy-pouring spout. Plastic bottle twist-to-open cap. Alloy Cold Chisels - Premium Used for cutting high tensile steels and welds, as well as most other metals, concrete and stone Forged from chrome alloy steel to give a harder blade with great resilience Blade will not shatter Softer head is designed to mushroom, not chip Accurately ground to the optimum 60 angle for cutting Oval section for comfortable grip 5AC x 13mm 0.10kg 5AC x 16mm 0.20kg 5AC x 20mm 0.28kg 5AC x 22mm 0.46kg 5AC x 25mm 0.68kg 5ACSET5 SET OF 5-13,16,20,22 and 25mm 2kg Description Size Chalk Refills - Blue 4oz/113g Chalk Refills - Blue 8oz/227g chisel - brick Brick Bolster Used for cutting bricks and concrete Forged from one piece of tough high tensile carbon manganese steel Hardened 113mm blade will also cut through bolts Finely ground to give a straight cutting edge Fitted with protective hand grip for safety Description Weight 5BBO Brick Bolster c/w Protective Grip 0.90kg Alloy Cold Chisels - Premium Australian made from tough chrome moly steel Made to BS3066:1995 Precision ground to optimum angle Hardened and tempered * Warning eye protection and gloves must be worn when using this product. 4CA10PP 10mm 0.07kg 4CA12PP 12mm 0.10kg 4CA16PP 16mm 0.15kg 4CA19PP 19mm 0.25kg 4CA22PP 22mm 0.34kg 4CA25PP 25mm 0.41kg 4CASET3 3 Piece Set 0.81kg 4CASET5 5 Piece Set 1.30kg 55

2 chisels - masonry Cold Chisels Used for general cutting including mild steel, bolts and concrete Forged from tough high tensile carbon manganese steel Blade correctly hardened and tempered so that it will not shatter The head is left softer to mushroom, not chip, for safety Cutting edge ground to the optimum angle for best performance and durability 5CCPP x 10mm 0.09kg 5CCPP x 13mm 0.15kg 5CCPP x 16mm 0.20kg 5CCPP x 20mm 0.33kg 5CCPP x 22mm 0.58kg 5CCPP x 25mm 0.63kg 5CCSET5 Set of 5-13,16,20,22 & 25mm 1.90kg Alloy Masonry Chisel - Premium Used for masonry and renovation work, stripping tiles, etc. & other general cutting Forged from tough chrome alloy steel Long finely tapered and ground blade, ground to the optimum 60 angle for cutting Head is normalized, designed to mushroom, not chip, for safety. 5CM x 25mm 0.57kg 5CM x 32mm 0.58kg 5CM x 38mm 0.59kg 5CM x 50mm 0.62kg chisel - plugging HAND TOOLS Chisel Bars Used with heavy hammer for masonry and demolition work Forged from tough high tensile carbon manganese steel Blade correctly hardened and tempered so that it will not shatter when driven hard The head is left softer to mushroom, not chip, for safety Ground and sharpened long tapered blade for better performance 5CCB x 25mm 1.00kg 5CCB x 25mm 1.33kg 5CCB x 25mm 1.67kg Plugging Chisels Used for cutting mortar joints Forged from tough high tensile carbon manganese steel Reverse tapered blade to avoid jamming Accurately ground and sharpened cutting edge 5PC 16mm - 7mm Blade 0.33kg CHISELS - RIPPING chisels - cold - set 5 Piece Cold Chisel Set Cold Chisels: 12, 16, 19, 22, 25mm : chisels - electrician Ripping Chisels Can be used for lifting, prying and removing nails Extra wide claw and cutting edge Bevelled nail slots Description Size mm Single End Double End 450 chisels - scutch comb 56 Electrician Bolster Used for chasing plaster and other renovation work Forged from one piece of tough high tensile carbon manganese steel Hardened 63mm blade will also cut through bolts Finely ground to give a straight cutting edge Fitted with protective hand grip for safety Description Weight 5EB Electricians Bolster c/w Protective Grip 0.59kg Scutch Combs Used with holder for cleaning, shaping and chasing masonry, including stone and plaster Made from high tensile steel, hardened and tempered for strength and durability Quality English product made to exacting standards Plated to prevent rusting, double-sided for double life 5SC25 25mm 0.01kg 5SC38 38mm 0.02kg 5SC50 50mm 0.03kg

3 HAND TOOLS chisels thru tang - sets Scutch Comb Holders Used for cleaning, shaping and chasing masonry, including stone and plaster Large head forged with sufficient material to support comb for added strength Supplied with hardened English-made replaceable comb Machined slot for accurate blade fitting Great for renovation, removing cement to replace tiles, cleaning bricks, etc. 5SHWC25 25mm Scutch Holder c/w Comb 0.54kg FatMax 5 Piece Thru-Tang Chisel Set Contains: (6mm) (12mm) (18mm) (25mm) (32mm) : SHWC38 38mm Scutch Holder c/w Comb 0.60kg 5SHWC50 50mm Scutch Holder c/w Comb 0.70kg chisel thru tang FatMax Thru-Tang Chisels Bevel edge chisels for the professional or craftsman. Full size bi-material Cellulose Acetate Buterate (CAB) and TPE handle provides superior grip and comfort. Steel striking cap allows the chisel to withstand blows from a steel hammer. Thru-Tang design increases strength and durability by 50% - Laboratory Tested. FatMax 6 Piece Thru-Tang Butt Chisel Set Contains (6mm) (12mm) (18mm) (25mm) (32mm) (38mm) : chisel Sets - woodworking Width Width mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 6 Piece Chisel Set Nylon Zipper Case + Stone & Honing Guide Two component handle. Protective holster included. Precision ground blade for maximum sharpness. Hardened and tempered for long lasting performance. Honed and ready to use. Description Size 424P-S6-ZC 6 Piece Chisel Set + Stone & Honing Guide 6-32mm FatMax Thru-Tang Butt Chisels Short series blade for strength and control. Hardened and tempered high chrome carbon alloy steel blade for edge retention. Cutting edge is finely ground and ready for use. Thru-Tang design provides 50% more strength and durability. Width Width mm mm mm mm mm mm 6 Piece Splitproof Chisel Set in Wooden Case Splitproof handle. Two component ergonomic nonslip grip. Protective holster included. Precision ground blade for maximum sharpness. Hardened and tempered for long lasting performance. Honed and ready to use. Polished blade for rust resistance. Safety guard with rounded shoulders. Tailored for demanding carpentry and construction jobs. Description Size 434-S6-EUR 6 Piece Splitproof Chisel Set in Wooden Case 6-32mm 57

4 chisels - woodworking clamps - buttress HAND TOOLS 58 Roughing Gouge Wood Turning Tools P&N woodturning tools are manufactured in Australia from high quality M2 high speed steel and painstakingly machined into a comprehensive range of gouges, chisels, parting and scraping tools. The handles are turned from selected Australian hardwood and specially shaped to fit naturally into your hand. Type Spindle Gouge Size Flute Length Handled Unhandled Bowl Gouge Supa Gouge Roughing Gouge Detail Gouge Skew Chisel 12 x x x x Parting Off Tool 3 x x Scraper - Square End 12 x x x x Beading Tool 10 x Buttress Clamps Holds press tools on all types of power presses Clamps work up to 75mm deep to drilling machines and lathe faceplates Constant clamping force ratio between workpiece and table Self aligning captive pivot 4 point contact resists tendency for workpiece to rotate Available in standard, medium or heavy duty Clamps - bar - quick action Quick Change Bar Clamps - XP Superior clamping force of up to 250kg - suitable for work cramping Non explosive release mechanism from smooth, one-handed release Clamp can be converted to a spreader - no tools needed Throat depth 94mm Description Size Quick Change Bar Clamp - XP 150mm Quick Change Bar Clamp - XP 1270mm CLAMPS - bar Optional Connector Bar Clamps For tough engineering jobs (fabrication, welding, machining, maintenance, toolroom) Extra heavy duty applications Spring loaded jaw stays in position when pressure is removed Jaw moves to securely clamp angled surfaces Tightening action does not rotate workpiece Available: o standard, medium and heavy duty o standard or long reach o clamping forces from 565 to 2700 dan o sizes from 150 to 2700mm jaw clamping CLAMPS - G G Clamps Malleable iron Heavy ribbed frame for strength and durability Corrosion resistant zinc plated Whitworth threaded screw, sliding bar handle and swivel pad Part No. Size Jaw Opening (mm) Part No. Size Jaw Opening (mm) Part No. Size Jaw Opening (mm) Super Grade Forged One Handed Clamps DW DW DW

5 punch & chisel sets riveters - hand Combination Set Australian made. Industrial quality. * Warning eye protection and gloves must be worn when using this product. 4PCSET6 Punch and Chisel 6 Piece Set 0.82kg Hand Riveter Steel fabrication and epoxy coated Suitable for light industrial use Will set up to 4.8mm aluminium rivets Product Code: FH10MK11C 7 Piece Punch & Chisel Set Punches: No. 6.5, 3, 4, 5 and 6mm Chisels: 12 and 16mm : A7100 Hand Riveter Kit Steel fabrication and epoxy coated Suitable for light industrial use Will set up to 4.8mm aluminium rivets packet in storage pouch with rivets Product Code: FH10MK11KP/A HAND TOOLS 10 Piece Punch & Chisel Set Punches: No.2, 3x9.5, 2, 3, 4, 5, 6 and 8mm Chisels: 12 and 18mm : Hand Riveter - 250mm 10 Diecast aluminium body and carbon steel leverage handles with moulded grips Replacement jaws, tips and springs available Four interchangeable nozzles to accept 2.4, 3.2, 4.0 and 4.8mm diameter rivets : CL700 Punch & Chisel Set 13 Piece Cold Chisels: 12, 19, 25mm. Long Pin Punches: 3, 4, 5, 6mm. Centre Punches: 3, 4, 5, 6.5mm. Starter Drift Punches: 3, 5mm. : Riveter - Professional Hardened and tempered jaws Easy grip handles Nose spanner included 3 interchangeable nose pieces: 3mm, 4mm and 5mm Product Code: EC-2730 Also available in Long Nose format Product Code: EC Punch/Chisel Sets Supplied in durable storage pouch Popular sizes Quantity Description piece Chisel Set piece Chisel / Punch Set Plier Style Riveter 30% more grip than regular 2 jaw types Manufactured from heavy gauge (2.5mm) sheet metal Complete with 4 hardened and replaceable nose bushes Length Capacity (Diameter) mm 2.4mm, 3.2mm, 4mm, 4.8mm

6 THICKNESSER blades Chisels -- jigsaw power 1800W Thicknesser Passage width/height: 152/330mm Feed speed: 7m/min Max cut depth: 3mm Includes: Push stick, dust extraction adaptor, reversible HSS blades : DH 330 ELECTRIC - TRIMMER - LAMINATE Pointed Chisel Pointed Chisel For general purpose chiselling and breaking work in brickwork, concrete and loose stone, for example when laying cables. Flat Chisel Angle Head Chisel Flat Chisel For general purpose chiselling and breaking work in brickwork, concrete and loose stone (targeted chiselling). Angle Head Chisel For general purpose chiselling and breaking work in brickwork, concrete and loose stone (targeted chiselling). Toothed Chisel POWER TOOLS 6.35mm (1/4 ) Laminate Trimmer Rubberised soft grip Smooth and accurate fine depth adjustment with rack and pinion mechanism Transparent plastic base for clear view of trimming edge Power supply cord attached to the top of housing allows for easy grip and handling : 3709X nut setter - magnetic Nut Setter - Magnetic For hexagon headed bolts, screws and nuts External hexagon with strong permanent magnet 1/4 Hex Drive Toothed Chisel For repointing, taking out whole bricks intact, removing tiles and plaster (tungsten carbide tipped) Brick Chasing Chisel Brick Chasing Chisel For working with limestone, concrete, brick and pumice block. Creates a groove in the material, making it ideal for cabling and plumbing applications. Concrete Chasing Chisel For cutting narrow channels into concrete. SCREWDRIVER BITS Concrete Chasing Chisel Type Size OA Length Shank SDS-Plus Concrete Chasing SDS Plus Flat SDS Plus SDS Plus Angled SDS Plus Pointed SDS Plus SDS-Max Brick Chasing SDS Max Concrete Chasing SDS Max Toothed SDS Max Flat SDS Max SDS Max SDS Max SDS Max SDS Max SDS Max Angled SDS Max Pointed SDS Max SDS Max SDS Max Head Length mm 65mm mm 65mm /4 65mm /16 65mm /8 65mm Screwdriver Bits - Apex Range Apex provides the widest range of industrial quality insert/power bits, including specialised bits for automotive / aircraft applications.