Tooling Product Guide

Transcription

1 Tooling Product Guide AUGUST 2017 Tel: Fax:

2 INDEX Page No. 3 FAST TAP MACHINES 4 FAST TAP TOOLING ACCESSORIES 5 MANUAL HORIZONTAL BANDSAW WORK HOLDING 6 HYDRAULIC MACHINE VICE 7 A-TYPE MACHINE VICE & KURT MACHINE VICE 8 K-TYPE MACHINE VICE & 52 PIECE MILL CLAMPING KIT 9 SEMI-UNIVERSAL DIVIDING HEAD 10 HORIZONTAL / VERTICAL ROTARY TABLE MACHINE ACCESSORIES 11 RENISHAW PRIMO KIT & ACCESSORIES 12 RENISHAW PRIMO WARRANTY REGISTRATION 13 WORKLIGHTS, AIR POWERED DRAWBAR & POWERFEED S 14 DRILLING ATTACHMENTS & GRIPPEX BAR PULLERS LATHE TOOL HOLDING 15 BISON TOOL POST & HOLDERS 16 BISON TOOL POST SPARES & ADJUSTABLE SPINDLE BACK STOP 17 LATHE CENTRES 18 BISON LATHE CHUCKS 19 CHUCK SOFT JAWS SPINDLE ACCESSORIES & TOOLING 20 MILLSTAR DIGITAL READOUT, RIGHT ANGLE & HORIZONTAL MILLING ATTACHMENTS 21 ER COLLETS 22 SPARES FOR COLLET CHUCKS & VERTEX ORTLIEB STYLE COLLETS (OZ25) 23 PRECISION COLLETS - R8 24 PRECISION COLLETS - 5C 25 CENTRELINE SPEED INCREASER 26 ER COLLET CHUCK SET, ER COLLET CHUCKS, FACE MILL ARBORS, & MORSE TAPER ARBORS & SLEEVES 27 BORING HEAD & FACING HEAD - BOXED SETS TAPMATIC TAPPING ATTACHMENTS & ACCESSORIES, KEYLESS DRILL CHUCKS, & DRILL CHUCK ARBORS TAPMATIC TAPPING ATTACHMENTS & ACCESSORIES, KEYLESS DRILL CHUCKS, & DRILL CHUCK ARBORS 30 TIGHTENING FIXTURE, PULL STUDS, JOB CONTACT PROBE, QUICK RELEASE QUILL NUT & HEIGHT PRE-SETTER 31 & 32 EASY CHANGE TOOLING SYSTEM 33 CTL ROTARY COOLANT ADAPTORS 34 CTL ANGLE HEAD 35 & 36 CHUCK & TAPPING SIZE CHARTS Please Note: For same day dispatch, orders must be placed before the following times: MONDAY THURSDAY FRIDAY We have a 25% re-stocking fee for parts returned unused BUT we do not accept parts back that are to special order or for non-standard stock. You must ensure the person fitting them is competent for the task and will leave the machine in a safe state. If you have any doubts we have fully trained service engineers to assist you in maintaining your machines ultimate performance. Spares For Competitors Machines XYZ Machine Tools understand the importance of having a large stock of spare parts to ensure the continued support for over 20,000 machines we have sold in the UK. That is why we hold over 1,000,000 of stock here at our headquarters in the UK ready for despatch the same day. However, we cannot guarantee our spares will suit machines not supplied by XYZ Machine Tools. Sometimes spares may appear similar to those from other manufacturers, but they may not be exactly the same and might not fit. 2

3 FAST TAP 1000, 800, & 90 Produces high quality threads Ideal for blind and through holes Can be used by unskilled labour Tap breakage drastically reduced Conventional taps or roll taps Free up your CNC machines Taps any material No indexing or moving workpieces Each machine comes complete and ready for operation with: Parallel arm for vertical tapping with 48 (1200mm) reach Air preparation unit with mist lubricator, Water trap, pressure gauge and regulator Air driven reversible tapping motor Quick change tapholder (Bilz style) Exhaust noise muffler FAST TAP MACHINES A range of five Fast Tap machines taps threads up to M24 in steel and aluminium. Fast Tap consists of a similar pantographic arm carrying an air motor which will tap blind holes as well as through holes, both vertically and horizontally. The standard 48 (1200mm) reach of the arm can easily be extended by up to 20 (500mm) if required, ensuring fast positioning of the tap relative to the hole. This means that larger fabrications or plates can remain stationary whilst the tap can be positioned within an 11 ft (3400mm) circle. Taps are held in the widely available Bilz style quick change tap drivers but the machine is capable of other common operations such as reaming, chamfering, countersinking, spot facing, helicoil insertion and stud making as well as assembly work like screw and nut driving. Fast Tap realistically removes tapping from expensive CNC machines and is significally quicker than hand tapping without needing skilled labour. XYZ Part No. Max. Capacity Speed: RPM Air pressure flow Max. noise Steel Aluminium No load PSI (CFM) (dba) 2052 Fast Tap 1000 M6 M (20) Fast Tap 800 M10 M (26) Fast Tap 400 M12 M (26) Fast Tap 200 M16 M24 250/ (30) Fast Tap 90 M24 M24 90/ (30) Warranty: 12 months parts (and labour at our works) 3

4 FAST TAP ACCESSORIES Torque limiting tap chucks for Fast Tap XYZ Part No. Size For Tap Size M1-M M2.2-M M M M M4 81 FAST TAP CHUCKS Fast Tap uses the widely available Bilz style clutch driven tap chucks Size 0 (FAST TAP 1000 ONLY) M1-M8 (ISO Taps) and M1-M10 (DIN Taps) Size 1 (FAST TAP 1000, 800, & 400) M3-M14 (ISO Taps) and M3-M14 (DIN Taps) Size 2 (FAST TAP 200 & 90 ONLY) M7-M24 (ISO Taps) and M8-M24 (DIN Taps) Reducer allows smaller taps to be used on Fast Tap 200 and Fast Tap M M M M M M M M M M24 81 Part numbers refer to ISO shanks (DIN shank chucks on request) For ISO & DIN Chuck and Tap Size Chart refer to page 40 Optional Accessories XYZ Part No. Description 1978 Horizontal motor bracket for 1000, 800 & Horizontal motor bracket for 200 & (500mm) Extension arm (225mm) Extension arm 172 Reducers for Fast Tap XYZ Part No. For Chuck Size to to 1 92 Pin wrenches for torque adjustment XYZ Part No. For Chuck Size Stub arbors for mounting drill chucks on Fast Tap XYZ Part No. Size Stub Taper (Jacobs) J6 75 4

5 MANUAL HORIZONTAL BANDSAW One bimetal blade fitted to machine Rugged vertical blade guide arms carrying tungsten carbide faced blade guides and roller bearings for optimum squareness of cut Quick acting vice, with 90 to 45 mitreing Low voltage control with overload protection for motor Hydraulic control of downfeed rate Control panel conveniently placed on top of bow Moveable material length stop Fast and accurate pointer to mark blade tensioning by large hand wheel Heavy duty cast iron construction Swarf brush Removable swarf tray for easy cleaning Automatic blade stop at end of cut Efficient coolant system with built-in tank and pump, supplies coolant directly onto blade, to each guide arm CE equipped with positive mode Interlocks on drum covers XYZ Part No XYZ 260 Cutting capacities at 90 Cutting capacities at 90 Cutting capacities at 45 Cutting capacities at 45 Blade size Blade speeds (50Hz) Motor Floor space Weight round rectangle 260mm 486 wide x 254 high mm 230mm 230 wide x 260 high mm 3300 x 25 x 0.9mm 21, 34, 43, 60m/min 1430rpm, 2hp, 4 pole 1730 x 760 x 1130mm 390kg net Spare Blades: 3300 x 25 x 0.9mm, M42 Bimetal XYZ Part No. Description vari-pitch vari-pitch TPI vari-pitch TPI Warranty: 12 months parts & labour A guide to the selection of the correct blade pitch for metal Cross Section Tooth Pitch TPI - Bars Tubes Profiles Regular Hook Variable Wall Thickness Tooth Pitch TPI Cross Section Tooth Pitch TPI 15mm 10 6/10 10mm 6/10 10mm 6/ mm 8 5/ mm 5/ mm 5/ mm 6-8 4/6 5/ mm 4/ mm 4/ mm / mm 3 2/3 5

6 WORK HOLDING 6 & 8 HYDRAULIC MACHINE VICE (12 Opening) Rugged construction Body is made of high quality ductile cast iron for extra rigidity Sliding bedways flame hardened and ground Concealed spindle for extra protection Hydra booster system for extra clamping pressure Quick action clamping Swivel base Draw down jaws Dimension A B C D E F G H VH VH Dimension X Y Z Max clamp force G.W.Kg VH kgs 65 VH kgs 110 XYZ Part No. Description Jaw Width Max open 5523 Hydraulic 6 Vice (VH-6) 150mm 300mm Hydraulic 8 Vice (VH-8) 200mm 300mm 640 6

7 6 A-TYPE MACHINE VICE High grade iron vice body Low overall height WORK HOLDING Adjustable positioner Moving jaw runs in long prismatic slides with provision for new adjustment Hardened and ground steel jaw plates Enclosed ACME screw with phosphor bronze nut Optional swivel base Drop forged handle Leadscrew protected against dirt and swarf Vice Nut Part No Jaw Width Max Jaw Opening Jaw Depth Overall Base Size Overall Height Clamp Bolt Centre Weight Dimensions 150mm 165mm 50mm 400 x 220mm 100mm 195 x 395mm 35kg XYZ Part No. Description Jaw Width Max open A-Type Vice 150mm 165mm Swivel base for above Swivel Handle Vice Nut Vice Screw Optional Swivel Handle Part No KURT MACHINE VICE Large 8.8 jaw opening Outside rail edges of the body are machined Vice nut does not extend beyond the end of the vice body Patented o ring pull down feature Approximately a 20% increase in clamping pressure Quick action clamping Sealed needle thrust bearing used at hex end of screw to reduce clamping friction Distinctive design of the Kurt look XYZ Part No. Description Jaw Width Max open 4982 D688 Kurt Vice V Kurt Vice For 2-OP Machine Standard Hard Jaws To Suit Kurt 6" Vice D688 (Pair) Soft Jaws For Kurt Vice D V (Pair)

8 K-TYPE MACHINE VICE WORK HOLDING Body and moveable jaw made of close grained high tensile iron castings Built for heavy duty machining with retained accuracy Jaw plates of hardened and ground tool steel Dimension E A B H R S a b h1 h2 g1 g2 G.W.kg (W) 58 XYZ Part No. Description Jaw Width Max Open K-Type Vice 200mm 150mm PIECE STEEL CLAMPING KITS (For King Rich mills, Mini Mills & VMC s) Heat treated steel black oxide finish. Block size 25mm. Set in rack consists of: 24 pcs Stud (75, 100, 125, 150, 175 and 200mm) 6 pcs T-nuts 4 pcs Coupling nuts 6 pcs Flange nuts 6 pcs Step clamps 6 pcs Step blocks Can be wall mounted for tidy and compact storage XYZ Part No. Description piece steel clamping kit (for 16mm slots) M12 studs piece steel clamping kit (for 18mm slots) M16 studs 110 8

9 WORK HOLDING SEMI-UNIVERSAL DIVIDING HEAD (includes chuck and tailstock) Dividing heads can divide in any angle by direct, indirect, or differential methods. The ratio between the worm and the worm gear is 40:1. Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground. The swivel head can be locked in any angle from 10 below horizontal to 90 vertical. Precision fitting to base assures smooth rotation. All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2, 3, 4, 6, 8, 12 and 24. Easy indexing of all numbers from 2 to 50 and many from 52 to 380. Model BS-2 is also equipped for differential indexing of all numbers from 2 to 380, and for spiral cutting. No. of holes per dividing plate PLATE A PLATE B PLATE C Semi-universal index B & S Type No. 0, No. 1 (Headstock) Type A B H h a b g Taper of centre Diameter of spindle hole BS-0 (mm) B & S No BS-1 (mm) B & S No BS-2 Universal dividing head with 132.7mm centre height Semi-universal index B & S Type No. 0, No. 1 (Tailstock) Type A1 B1 H1 h a1 b1 g1 BS-0 (mm) BS-1 (mm) BS-2 Universal dividing head with 132.7mm centre height XYZ Part No. Description 1811 BS0 Dividing head with 125mm chuck and tailstock BS1 Dividing head with 160mm chuck and tailstock BS2 Dividing head with 200mm chuck and tailstock

10 HORIZONTAL / VERTICAL ROTARY TABLE WORK HOLDING Table is made of high density Meehanite grade iron. Worm is hardened and ground. Ratio of 90:1. Work table is graduated a full 360 so one turn of handle move table 4. Micro collar graduated in steps of 1' min. Vernier scale makes quick settings. Excellent performance, practical design and reasonable cost Perfect for circular work, angle setting, boring, spot facing etc. Item No. Testing objective Variation-maximum tested Item No. 1 Flatness of clamping surface (Concave) /0.015mm Item No. 2 Parallelism of clamping surface to base /0.020mm Item No. 3 Squareness of clamping surface /0.015mm Item No. 4 True running of clamping surface /0.015mm Item No. 4 True running of centre hole, measured at hole edge /0.020mm Item No. 4 True running of centre hole, measured at Arbor 4-in long /0.015mm Item No. 5 Indexing accuracy of direct indexing mechanism maximum 45 HV-10 HV-12 HV-14 HV-16 Table: Outer diameter - A1 110mm 130mm 130mm 150mm Table: Outer diameter - D 250mm 300mm 350mm 406mm Table: Height - H 115mm 135mm 140mm 155mm Base dimension - H1 165mm 195mm 230mm 255mm Base dimension - A 325mm 388mm 450mm 500mm Base dimension - B 280mm 330mm 380mm 430mm Width of T-slot - e 14mm 16mm 16mm 16mm T-slots type Bolt slots - g 17mm 18mm 18mm 18mm Centre sleeves MT-3 MT-4 MT-4 MT-4 Gross weight wooden case 45kg 85kg 100kg 135kg XYZ Part No. Description Horizontal/vertical rotary table - HV Horizontal/vertical rotary table - HV Horizontal/vertical rotary table - HV Horizontal/vertical rotary table - HV

11 MACHINE ACCESSORIES RENISHAW PRIMO KIT & ACCESSORIES Reduces scrap Lower costs reduce the number of skilled operators Reduce setting times Higher utilisation of machines Improve forecasting predit how long setting will take and plan accordingly Shorten manufacturing lead times Greater agility Protect revenues & margins XYZ Part No. Description Renishaw Primo Kit to suit XYZ VMC's & Mini MIll's Renishaw 6 Months Primo Token (Includes Primo Total Protect) Renishaw Lifetime Primo Token (Excludes Primo Total Protect) Renishaw Job Contact Probe Stylus For Renishaw OMP 40 Length 100mm Probe Tc/Sp Stylus For Renishaw OMP 40 Length 50mm Probe Tc/Sp Lithium cell, DL CR2 Battery For Primo

12 Renishaw Primo Warranty Instructions PLEASE KEEP THIS DOCUMENT IN A SAFE PLACE Thank you for purchasing a Renishaw Primo Probe Kit and 6 month token. This product comes with a manufacturers Primo Total Protect (PTP) warranty. The Primo Total Protect (PTP) warranty is valid for 6 months from the date of registration. Please register your product straight away with Renishaw with the easy online form otherwise your warranty will be VOID. Please register at: Please record below your serial numbers required for registering your Primo Primo Credit Token: Primo Radio Part Setter: Primo Interface: Primo Radio 3D Tool Setter: How To Make A Claim In the event of a claim please contact Renishaw Direct. All warranty claims are administered through the manufacturer (NOT XYZ Machine Tools Ltd). You will need your Probe serial number and description of the fault. Contact: Howard Tipper on or via at sales.office@renishaw.com WHAT S COVERED... It covers faulty product and customer damage when used with the 6 month credit token (Lifetime Tokens are NOT included) Any crashed in the Primo Total Protect (PTP) period will be replaced free of charge. Items covered by PTP include the Radio Parts Setter, Radio 3D Tool Setter and Interface The length tool setter shank and parts setter stylus are NOT included 12

13 HALOGEN WORK LIGHTS MACHINE ACCESSORIES Dust proof luminaire head Articulated arm 190 x 280mm Universal base XYZ Part No. Description LED Worklight - ( For VL / SLX lathes) LED Worklight 110V - ( For SMX 3500, 4000 & 5000 Bed Mills) LED Worklight 24V - ( For SMX Turret Mills) Halogen Worklight VOLT ( For VM / SMX Bed Mills) Halogen Worklight - 24 VOLT 70W ( For SM / SMX Turret Mills) Halogen Worklight Extended Arm - 24 VOLT 70W 130 AIR POWERED DRAWBARS Suits all turret mills. Available for R8, ISO 30, ISO 40 spindles. High torque air motors. Complete with air regulators Increase productivity with only 5 seconds tool change. XYZ Part No. Description Powered Drawbar - R Powered Drawbar ISO 30 - M Powered Drawbar ISO 40 - M ELECTRONIC POWER FEED UNITS FOR MANUAL MILLING MACHINES Electronic variable speed power feeds. Available to fit X, Y, or Z axis Smooth variable speed control. Rapid override. Thermal cut-out to prevent damage. Feed range 8-800mm/min XYZ Part No. Description 4894 Align Power Feed AL400S - X AXIS Align Power Feed AL400S - Y AXIS (Cross) Align Power Feed AL400S - Z AXIS (Knee) Align Power Feed x Axis For SLV

14 DRILLING ATTACHMENTS Holds larger drills & boring bars Precise accuracy for drilling & boring MACHINE ACCESSORIES Fixes to the cross slide so easy to fit and very secure allowing no movement during machining XYZ Part No. Bore Description mm Drilling Attachment 40mm Bore For 355 Lathe mm Drilling Attachment 40mm Bore For 425 Lathe mm Drilling Attachment 40mm Bore For 555 Lathe mm Drilling Attachment 75mm Bore For 555 x 3M ONLY mm Drilling Attachment 40mm Bore For XL 780 Lathe 1378 GRIPPEX AUTO BAR PULLERS The bar puller makes your CNC lathe more effective right away Instant setup gripping Is secured without any Adjustment Compact and light adjacent turret tool positions need not be vacated Grippex Large Grippex Small Grippex Mini Shanks Straight 25, 32, 40mm VDI 30, VDI 40 Gripping Fingers 2-60mm 3-80mm 7-105mm Inserts Gripping Inserts (IF) Option Inserts Robot Inserts (RI) Robot Jaws (RJ) for 3-80mm XYZ Part No. Description Shanks Straight 20, 25, 32mm VDI 20, VDI 30 Gripping Fingers 2-52mm Inserts Gripping Inserts (IF) Option Inserts Robot Inserts (RI) Shanks Straight 16, 20, 25mm VDI 16, VDI 20 Gripping Fingers 0-38mm (with gripping fingers) 0-38mm (with robot fingers) Robot Jaws (RJ-M) for robot fingers 4716 Grippex Auto Bar Puller 3-60mm To Suit Vulcan Grippex Auto Bar Puller 3-80mm For XYZ TC 250, 320LTY, Grippex Auto Bar Puller 2-60mm Cap VDI30 for CT Grippex Gripping Fingers 2-60mm capacity Grippex Auto Bar Puller 3-80mm to suit CT

15 LATHE TOOL HOLDING BISON TOOL POST AND HOLDERS Bison T1T Quick Change Toolposts for manual machines XYZ Part No. Description 5647 Toolpost set c/w 4 Standard, 1 Vee and 1 MT1 Holder 63.5mm Extra standard holder 22mm Gap Extra vee Holder Extra morse taper 1 holder Extra plain bore holder 25mm 82 Bison T2T Quick Change Toolposts for manual machines and ELX 1440, SLX1630 & SLX355 XYZ Part No. Description 4929 Toolpost set c/w 4 Standard, 1 Vee and 1 MT2 Holder 76mm Extra standard holder (Gap 28.5mm) Extra vee holder Extra morse taper 2 holder Extra plain bore holder 32mm 91 Bison T3 Quick Change Toolposts for manual machines and SLX425 & SLX555 XYZ Part No. Description 4928 Toolpost set c/w 4 standard, 1 Vee and 1 MT3 Holder 95.5mm Extra standard holder (Gap 35mm) Extra vee holder (Gap 35mm) Extra morse taper 3 holder Extra plain bore holder 40mm

16 BISON TOOL POST SPARES LATHE TOOL HOLDING Description Axis Part No. Code No. Used ON s Description Axis Part No. Code No. Used ON s HEX WRENCH SQ HEAD SCREW T0, T1, T1X U-6877/0 T0, T1, T1X T2, T2T U-7386/0 T2, T2T T3, T3HX U-6881/0 T3, T3HX 5.50 CLAMP BOLT STOP SCREW T0, T1, T1X U-6877/1 T0, T1, T1X T2, T2T U-7386/1 T2, T2T T3, T3HX U-6881/1 T3, T3HX 4.50 STOP T-WRENCH T0, T1, T1X T0, T1, T1X T2, T2T T2, T2T T3, T3HX T3, T3HX LOCATION PIN SPRING T1, T1X T0, T1, T1X T2, T2T T2, T2T T T3, T3HX 2.40 CLAMP PAD T0, T1, T1X T2T T3, T3HX ADJUSTABLE SPINDLE BACKSTOP Spindle Backstop for main machine spindle For repeated positioning of bar type work pieces Easy to fit, remove or re-position the stop This product is essential for every Turner. It fits into the spindle tube and is locked into the required position by means of an extended hexagon key. Supplied complete with extended hexagon key and instructions for use. XYZ Part No. Bore Description mm Adjustable Spindle Backstop - VL mm Adjustable Spindle Backstop - SLX 355 & CT mm Adjustable Spindle Backstop - SLX 1630 & PRO mm Adjustable Spindle Backstop - SLX 425 & PRO mm Adjustable Spindle Backstop - SLX mm Adjustable Spindle Backstop - CT

17 LATHE TOOL HOLDING LATHE CENTRES (PRECISION ACCURACY) Revolving Centres Hardened and precision ground. Thrust bearings for axial load. Roller bearings for centrifugal load. Hardness 60 HRC Carbide Tipped Dead centres Hardened and precision ground. Concentricity within 0.005mm. Point hardness 70 HRC Interchangeable Point Centre Sets Hardened and precision ground. Complete with a selection of various points Specification Centre position 0.003mm 0.003mm 0.005mm 0.01mm 0.01mm 0.01mm 0.015mm Overall length 165mm 200mm 265mm 333mm 165mm 200mm 270mm Body diameter 42mm 47mm 65mm 130mm 42mm 47mm 83mm Maximum RPM Maximum load 400kg 700kg 1500kg 3500kg 400kg 700kg 1800kg XYZ Part No. Description s 5200 Carbide tip dead centre (60 ) MT Carbide tip dead centre (60 ) MT Carbide tip dead centre (60 ) MT Carbide tip dead centre (60 ) MT Revolving centre (60 ) MT Revolving centre (60 ) MT Revolving centre (60 ) MT Revolving centre (60 ) MT Interchangeable Point Set c/w 7 various points MT Interchangeable Point Set c/w 7 various points MT Interchangeable Point Set c/w 6 various points MT

18 LATHE CHUCKS 3 Jaw Chucks 4 Jaw Chucks LATHE TOOL HOLDING Please Note: XYZ can supply soft jaws and hard jaws for Lathe Chucks. See our web shop for more details. Bison 3 Jaw Chucks with Internal / External Hard Jaws XYZ Part No. Description Body Type Max RPM mm Chuck with D1-4 Camlock Steel mm Chuck with D1-4 Camlock Steel mm Chuck with D1-6 Camlock Steel mm Chuck with D1-8 Camlock 76.9mm Bore Steel mm Chuck with D1-8 Camlock 91mm Bore Cast Iron mm Chuck with D1-8 Camlock Steel mm Chuck with D1-11 Camlock Steel mm Chuck with D1-11 Camlock Steel mm Chuck with A2-11 Mount Steel Bison Independant 4 Jaw Cast Iron Chucks XYZ Part No. Description Max RPM mm Chuck with D1-5 Camlock mm Chuck with D1-6 Camlock mm Chuck with D1-8 Camlock mm Chuck with D1-11 Camlock mm Chuck with A2-11 Mount Pratt Independant 4 Jaw Cast Iron Chucks XYZ Part No. Description Max RPM mm Independent Chuck 4 Jaw with D1-4 Camlock

19 LATHE TOOL HOLDING Pratt Chuck Soft Jaws XYZ Part No. Description 7783 Soft Jaws for 160 mm Dia 3 Jaw Chuck Soft Jaws for 200 mm Dia 3 Jaw Chuck Soft Jaws for 250 mm Dia 3 Jaw Chuck Soft Jaws for 315 mm Dia 3 Jaw Chuck Soft Jaws for 400 mm Dia 3 Jaw Chuck Bison Chuck Soft Jaws XYZ Part No. Description 2668 Soft Jaws for 160 mm Dia 3 Jaw Chuck Soft Jaws for 200 mm Dia 3 Jaw Chuck Soft Jaws for 250 mm Dia 3 Jaw Chuck Soft Jaws for 315 mm Dia 3 Jaw Chuck Soft Jaws for 400 mm Dia 3 Jaw Chuck Soft Jaws for 500 mm Dia 3 Jaw Chuck Soft Jaws for 630 mm Dia 3 Jaw Chuck Strong Chuck Soft Jaws XYZ Part No. Description 7991 Soft Jaws for 250 mm Dia. 3 Jaw Chuck Soft Jaws for 200 mm Dia. 3 Jaw Chuck Hydraulic Chuck Soft Jaws XYZ Part No. Description 9976 Soft Jaws for 160 mm Dia Chuck for CT52 & 150TC Soft Jaws for 200 mm Dia Chuck for 200 TC Soft Jaws for 250 mm Dia Chuck for 250 TC Soft Jaws for 315 mm Dia Chuck for 320 TC LTY

20 SPINDLE ACCESSORIES & TOOLING MILL STAR DIGITAL READOUT KIT Included in the kit: cast arm, 3 sized adjustable quill brackets, bolts, fitted digital scale, battery and instructions. Travel: 153mm (6 ) Resolution: 0.01mm ( ) LCD Display: 10mm character height Battery: 1.5V SR44 Working temperature: C Mill Star digital readout kit offers an easy fitment to some of the most common machine quills, including the Bridgeport vertical milling machines. The kit is supplied with several different fittings and instructions, allowing for a quick installation. The Mill Star is constructed from a heavy duty cast fixing arm with a hard wearing powder coating finish. The cast arm is secured to the machine secured to the rear of the display head. This attaches to the existing quill providing the drive for the reading head. The easy to read LCD display will switch between metric and imperial reading. The unit can be set to zero in any position allowing easy depth setting. A data value can also be entered using the arrow keys on the display. Compatible machines: XYZ 1500, 2000, 3000 series machines, most Bridgeports and similar turret mills. XYZ Part No RIGHT ANGLE ATTACHMENT FOR MILLING MACHINES WITH QUILLS Adds a new dimensions to the turret mill. Available to suit R8 and ISO 40 spindles. XYZ Part No. Description 4843 R8 Right angle milling attachment, for quills 3.3/8 diameter ISO 40 Right angle milling attachment, for quills 4.1/2 diameter ISO 40 Right angle milling attachment, for quills 4.1/8 diameter 684 HORIZONTAL MILLING ATTACHMENT FOR MILLING MACHINES WITH QUILLS Complete with Arbor, collars, Arbor support and right angle attachment, for slitting saws, side and face cutters etc. Available to suit R8 and ISO 40 spindles. XYZ Part No. Description 453 R8 Horizontal milling attachment ISO 40 Horizontal milling attachment

21 SPINDLE ACCESSORIES & TOOLING ER COLLETS TO DIN 6499 Precise accuracy. Powerful clamping. Full 1mm collapse without loss of concentricity. Use for milling, drilling, rigid tapping and reaming etc. No need to hold a special collet for a fractional size or 1/2mm increment. L mm D mm DIN 6343 standard precision mm XYZ standard precision mm Type A B ER ER ER Collet size Ref No. ER 16 ER 32 ER 40 XYZ Part No. 1 to 0.5 ER to 1 ER Ref No. XYZ Part No. 3 to 2 ER ER to 3 ER ER Ref No. XYZ Part No. 5 to 4 ER ER ER to 5 ER ER ER to 6 ER ER ER to 7 ER ER ER to 8 ER ER ER to 9 ER ER ER to 10 ER ER to 11 ER ER to 12 ER ER to 13 ER ER to 14 ER ER to 15 ER ER to 16 ER ER to 17 ER ER to 18 ER ER to 19 ER ER to 20 ER to 21 ER to 22 ER to 23 ER to 24 ER to 25 ER

22 SPINDLE ACCESSORIES & TOOLING SPARES FOR COLLET CHUCKS Locknuts XYZ Part No. For collet chucks 5207 ER ER ER Wrenches XYZ Part No. For collet chucks 5243 ER ER ER VERTEX ORTLIEB STYLE COLLETS (OZ25) TO DIN 6388 XYZ Part No. Size XYZ Part No. Size mm / / mm mm / / mm mm mm mm / / mm mm mm / / mm mm mm / / mm mm mm mm / / mm mm / / mm mm mm mm

23 PRECISION COLLETS, R8 SPINDLE ACCESSORIES & TOOLING Model Size Threads for drawbar R8 Fractional 1/16 to 3/4 Metric 2mm to 20mm 7/16 UNF x 20 XYZ Part No. Size XYZ Part No. Size / / mm mm mm / / mm mm mm / / mm mm mm / / mm mm mm / / mm mm mm mm / / mm mm mm 15 23

24 PRECISION COLLETS, 5C SPINDLE ACCESSORIES & TOOLING Model Size Threads for drawbar 5C Fractional 1/4 to 1.1/8 Metric 3mm to 25mm 1.5/16 UNF x 20 XYZ Part No. Size XYZ Part No. Size mm / / mm mm mm / / mm mm mm mm / / mm mm / / mm mm mm mm / / mm mm mm / / mm mm mm / mm / mm / / Emergency mm 24

25 SPINDLE ACCESSORIES & TOOLING SPEED INCREASERS The CTL Centreline speed increaser. 4:1 ratio ER 16 collet chuck. 10mm cutter capacity. Speeds up to 20,000 RPM Enables high speed machining techniques on traditional mills. The CTL Centreline Speed Increaser allows users of turret mills and older machine tools to increase spindle speeds up to the levels required by modern tooling at an affordable price. The speed increaser represents a small investment that brings big returns in higher productivity and improved surface finish, giving new life to the one million turret mills in use worldwide that would otherwise be unable to meet the requirements of modern machining techniques. Why invest in a Speed Increaser? EGI-Milling aluminium slot with SMX3500 Mill (top speed 5000rpm, max feed 2540mm/min) using three flute carbide end mill. Without Speed 3600rpm, max feed = 756mm/min With Speed Increaser 4:1 Speed Increaser 3000rpm in/12000rpm out, max feed = 2520mm/min EG-2 Engraving tool steel with SMX2000 Mill (top speed 4200rpm, max feed 2540mm/min) using 1.5mm carbide slot drill. Without Speed 4200rpm, max feed = 126mm/min With Speed Increaser 4:1 Speed Increaser 3000rpm in/12000rpm out, max feed = 360mm/min Available in versions to suit all major makes of machine tool, the Centreline Speed increaser can be supplied with R8, ISO30, ISO40 tapers and other drives for both manual and automatic tool change. The unit is factory sealed for a maintenance free life. XYZ Part No. Shank 5281 R ISO ISO BT

26 SPINDLE ACCESSORIES & TOOLING ER SPRING COLLET CHUCK SET Collet chuck kits R8 Includes shank, full set of collets, wrench and case. For milling and drilling. ER16 set for 1mm-0mm to 10mm-9mm. ER32 set for 3mm-2mm to 20mm-19mm. ER40 set for 5mm-4mm to 26mm-25mm. Full 1mm collapse of collet with concentricity maintained. Boxed set with holder, collets and wrench XYZ Part No. Shank Collet size Collet range No. of collets 5322 R8 ER to R8 ER to R8 ER to ER COLLET CHUCKS XYZ Part No. Shank Collet size Gauge length Collet range 5277 R8 ER 16 32mm 1-0 to R8 ER 32 50mm 3-2 to R8 ER 40 76mm 5-4 to FACE MILL ARBORS Holding indexable face mills and HSS shell mills. 22mm dia, 27mm dia spigots XYZ Part No. Shanks Spigot Dia Gauge length For cutter dia 5285 R8 22mm 15mm 50mm, 63mm R8 27mm 15mm 80mm 60 MORSE TAPER ADAPTORS AND SLEEVES XYZ Part No. Shanks Inside MT Number Gauge length 5282 R8 1 15mm R8 2 20mm R8 3 40mm MT MT MT MT

27 SPINDLE ACCESSORIES & TOOLING PRECISION BORING HEAD SETS Simple to use, yet very rigid construction. Perfectly balanced for high speed operation. 0.01mm resolution (dia) adjustment. All parts hardened, all working surfaces ground. Set consists of: Adjustable boring head C/W shank. 2 off end holes 20mm dia. (1 x centred, 1 x offset) 1 off crosshole 20mm dia. 3 off boring tools. 1 off square brazed carbide tool bit. Offset arms and reduction bushes. Durable plastic case. Boring head sets XYZ Part No. Shanks Diameter Range Gauge length 5441 R mm 102mm ISO 40 Tapped M mm 106mm ISO 40 Tapped 5/8 UNC 5-250mm 106mm BT mm 106mm 504 PRECISION BORING AND FACING HEAD SETS Simple to use, yet very rigid construction. Perfectly balanced for high speed operation. 0.01mm resolution (dia) adjustment. All parts hardened, all working surfaces ground. Use for: Boring, Facing (inside to out), Taper turning, Recessing, Facing (outside to in), Taper boring, Over turning, Back facing. Set consists of: Adjustable boring and facing head C/W shank. 3 off end holes 18mm dia. (1 x centred, 2 x offset) 1 off crosshole 18mm dia. 4 off boring tools. 1 off square HSS toolbit. Universal boring and facing master head sets Offset arms and reduction bushes. Stop arm (for facing). Durable plastic case. XYZ Part No. Shanks Diameter Range Gauge length 5269 R mm 118mm ISO 40 Tapped M mm 116mm BT mm 164mm

28 SPINDLE ACCESSORIES & TOOLING TAPMATIC TAPPING ATTACHMENTS Self reversing tapping attachments for: Manual drills and manual mills with a manual quill feed. CNC mills with a manual quill feed. XYZ Part No. Tapping capacity Style Mount Collets 4813 M1.4 to M6 RX30 J6 J116, J M3 to M12 RX50 J6 J421, J M5 to M18 RX70 Threaded 7/8 x 20 J443, J PLEASE NOTE: Remember to add the Arbor & Collets to the price of this tapping attachment. See page 26 for taper arbors and for collets Non reversing tapping attachments for: Machining centres (ALL VMC s) and CNC mills with rigid tapping XYZ Part No. Tapping capacity Style Mount Collets 4826 M3 to M12 SM42 20mm sidelock J421, J M5 to M18 SM44 25mm sidelock J443, J M10 to M30 SM46 25mm sidelock J461, J PLEASE NOTE: Remember to add the Arbor & Collets to the price of this tapping attachment. See page 26 for collets Self reversing tapping attachments for: CNC mills with powered Z axis feed (SM / SMX2500) XYZ Part No. Tapping capacity Style Mount Collets 4817 M1.4 to M6 SPD 3 J6 J116, J M3 to M12 SPD 5 J6 J421, J M5 to M18 SPD 7 Threaded 7/8 x 20 J443, J PLEASE NOTE: Remember to add the Arbor & Collets to the price of this tapping attachment. See page 26 for collets Self feed (tension compression) attachments for: For CNC machines with spindle reversal (VM / SMX 3500, 4000, 5000) & Proturn Lathes XYZ Part No. Tapping capacity Style Collets Side Lock Or Morse Taper 9584 M1.4 to M7 SM2 J115, J443 MT2-20mm M3 to M12 SM4 J421, J422 MT2-20mm M5 to M18 SM6 J443, J440, J445 MT3-25mm 365 PLEASE NOTE: Remember to add the Arbor & Collets to the price of this tapping attachment. 28

29 SPINDLE ACCESSORIES & TOOLING TAPMATIC TAPPING ACCESSORIES Rubberflex Collets for Tapmatic attachments XYZ Part No. Collets For tap shank diameter 5136 J mm - 4.5mm J mm - 6.5mm J mm - 6.5mm J mm mm J mm - 7.0mm J mm mm J mm mm J mm mm J mm mm Threaded Arbors for tapping heads XYZ Part No. Shank Collets 4822 R8 Threaded 7/8 x ISO 40 tapped M16 Threaded 7/8 x KEYLESS DRILL CHUCKS XYZ Part No. Clamping Range Female taper Body Dia (mm) Length Max run out WT Torque Open Closed gram KgF-CM DIA (mm) L (mm) Max mm J mm J DRILL CHUCK ARBORS For mounting drill chucks and tapping attachments. Choice of Stub Tapers Jacobs (J.T) XYZ Part No. Shank Stub taper Gauge length 5414 R8 JT6 10 mm MT2 JT MT2 B MT3 JT MT3 JT MT3 JT MT4 JT MT5 JT

30 SPINDLE ACCESSORIES & TOOLING TIGHTENING FIXTURE PULL STUD XYZ Part No. For shank 5449 ISO 40, BT XYZ Part No. For shank BT 30 For 2 OP (Set of 8) MAS 1 for BT BT 40 for through spindle coolant 16 HEIGHT PRESETTER Height 50mm The red lamp will be lit when touched Accuracy 0.005mm Combined vertical and horizontal in a unit Weight 0.7kgs XYZ Part No. Description 9622 Height Tool Length Setting Gauge x Spare battery for above 2.90 each XYZ Part No Description Quick Release Quill Nut For 1500 / 2000 / 3000 / 3500 Quick Release Quill Nut For 4000 / JOB CONTACT PROBE Touch point sensor. High sensitivity location sensor. Battery operated red pilot light and beeper Detects locations of end surface, outside diameters and inside diameters. Beeper is audible when light not visible e.g inside of deep bore. Body diameter 20mm - fits into a collet chuck or 20mm R8 precision collet. Ball diameter 10mm - Spindle centre line is 5mm from contact surface. Ball is spring loaded to avoid damage by overwinding. Works on continuity XYZ Part No. Description 2127 Job contact probe Spare battery for above

31 SPINDLE ACCESSORIES & TOOLING EASY CHANGE Tooling System Suitable for manual machines with R8, ISO 30, ISO 40 and Morse Taper Spindles Less wear on machine spindle due to master holder staying in place Rapid change over between tools in just a few seconds Very accurate - Run-out better than 0.02mm Single handed operation to remove and fit tools Allow pre-set tooling to be used No machine modification required Variety of tool adaptors available 1) Load R8 Master holder into machine spindle and set collar in open position 2) Insert tool and collar automatically returns to closed position and locks. 3) Remove tool with one hand by twisting collar to release tool. 4) Load new tool as before in seconds. Easy Change Voucher Options XYZ Part No Starter Kit Productivity Kit 700 Starter Kit Productivity Kit R8 Adaptor 1 1 Storage Tray 1 1 Vice Mounted Tightening Fixture 1 1 Customer Choice of METRIC Tool Holders

32 SPINDLE ACCESSORIES & TOOLING EASY CHANGE Tooling System Easy Change Master Body XYZ Part No. Mount Gauge Length Diameter 8069 QC 30 39mm 60mm QC 40 39mm 60mm R8-7/16 UNF 27mm 60mm 264 ER Collet Chuck XYZ Part No. Collet Type Capacity Gauge Length A 7604 ER mm 40mm ER mm 40mm ER mm 45mm ER mm 50mm 104 XYZ Part No. Bore Dia Dia D Gauge Length L mm 30mm 35mm mm 30mm 35mm mm 30mm 35mm mm 30mm 35mm End Mill Adaptors mm 45mm 55mm mm 55mm 75mm Jacobs Adaptors XYZ Part No. Taper 1345 JT JT JT Morse Taper Adaptors XYZ Part No. Taper Gauge Length 6041 MT1 51mm MT2 62mm MT3 117mm 103 Shell Mill Adaptor XYZ Part No. Spigot Dia d Body Dia D Gauge Length L Spigot Length H mm 44mm 15mm 17mm mm 50mm 15mm 19mm 120 Tightening Fixture Tool Tray XYZ Part No XYZ Part No

33 ROTARY COOLANT ADAPTORS Auto Tool Change capability Maintenance free sealed unit Variety of tool holding options 6000 RPM maximum speed Max coolant pressure 10 bar SPINDLE ACCESSORIES & TOOLING The CTL Centreline Rotary Coolant Adaptors allow users of both manual and CNC machines to increase productivity of their machine tool by adding the option for through tool coolant. R.C.A s can be supplied with either side lock or collet chuck tool mount in a variety of sizes. All units are designed for Auto Tool Change, but manual units are available. XYZ Part No. Shank Output Type R8 EMA 16mm R8 EMA 20mm R8 EMA 25mm R8 ER32 CC ISO 30 EMA 16mm ISO 30 EMA 20mm ISO 30 EMA 25mm ISO 30 ER32 CC ISO 40 EMA 16mm ISO 40 EMA 20mm ISO 40 EMA 25mm ISO 40 ER32 CC BT 40 EMA 16mm BT 40 EMA 20mm BT 40 EMA 25mm BT 40 EMA 32mm BT 40 ER32 CC

34 ANGLE HEADS SPINDLE ACCESSORIES & TOOLING Auto Tool Change capability Maintenance free sealed unit 10mm cutter capacity via ER16 Collet Chuck 6000 RPM maximum speed 1:1 Speed Ratio Can be rotated through 360 Special applications also available The CTL Centreline Angle Head allows users of both manual and CNC machines to increase productivity of their machine tool by taking away the need to re-fixture for additional milling or drilling operations. Angle heads can accommodate end mills, drills or taps for machining a variety of materials. All heads are designed for Auto Tool Change, where applicable. NOTE: A Quill clamp will be required for manual machines. XYZ Part No. Shank R8 * ISO 30 * ISO 40 * BT * Quill clamp required for manual machines. N.B NOT AVAILABLE ON WEB STORE 34

35 CHUCK & TAP SIZE CHART CHUCK SIZE ISO STANDARD TAPS TAP SIZE SHANK SQUARE A/F M1 - M2 10, 9 BA M2.2 - M2.5 8, 7, 6 BA M3 4-5 UNC / UNF 5 BA M3.5 6 UNC / UNF 4 BA M M4.5 8 UNC / UNF 3BA M5 10 UNC / UNF 2 BA UNC / UNF 1 BA M6 1/4 UNC / UNF 0 BA M M8 5/16 UNC / UNF M M4.5 8 UNC / UNF 3BA M5 10 UNC / UNF 2 BA UNC / UNF 1 BA M6 1/4 UNC / UNF 0 BA M M8 5/16 UNC / UNF M11 7/16 UNC / UNF M12 1/2 UNC / UNF M M10 3/8 UNC / UNF M14 9/16 UNC / UNF M M8 5/16 UNC / UNF M11 7/16 UNC / UNF M12 1/2 UNC / UNF M M10 3/8 UNC / UNF M14 9/16 UNC / UNF M16 5/8 UNC / UNF M18 3/4 UNC / UNF M20 3/4 UNC / UNF M22 7/8 UNC / UNF M24 1 UNC / UNF CHUCK SIZE DIN STANDARD TAPS TAP SIZE SHANK SQUARE A/F M1 - M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

36 TAPPING DRILL SIZES 36