MAJOR MANUFACTURERS. CNC & MANUAL MACHINERY BIDDING CLOSES TUESDAY, AUGUST 1:00 P.M. EDT Inspection: CALL (888) FOR APPOINTMENT

Transcription

1 SURPLUS EQUIPMENT Online Auction SURPLUS CNC & MANUAL MACHINERY NO LONGER NEEDED IN THE CONTINUING OPERATIONS OF MAJOR MANUFACTURERS CNC & MANUAL MACHINERY BIDDING CLOSES TUESDAY, AUGUST 1:00 P.M. EDT Inspection: CALL (888) FOR APPOINTMENT EVERYTHING MUST SELL! 2002 (CTRL) GIDDINGS & LEWIS G60-FX 6" CNC FLOOR TYPE HORIZONTAL BORING MILL POREBA 53" X 236" MANUAL ENGINE LATHE 2007 CONTROLLED AUTOMATION 2AT TON CNC PLATE PUNCH MAZAK M-5B 24" X 82" M-5N CNC FLAT BED LATHE Turning Your Assets into Dollars Asset Sales, Inc. Corporate Headquarters 301 Post Office Drive, Suite C Indian Trail, NC Toll Free Fax info@asset-sales.com European Headquarters 6 Hill End Close, Norwood Green Halifax, West Yorkshire, HX3 8RH Tel / Fax peteraml@asset-sales.co.uk

2 MACHINERY INSPECTION DATE & TIME CALL (888) FOR APPOINTMENT 2002 (CTRL) GIDDINGS & LEWIS G60-FX 6" CNC FLOOR TYPE HORIZONTAL BORING MILL GIDDINGS & LEWIS 70A-DP4-T 4" MANUAL TABLE TYPE HORIZONTAL BORING MILL 2

3 ONLINE AUCTION SALE DATE & TIME BIDDING CLOSES TUESDAY, AUGUST 1:00 P.M. EDT WOTAN 67" X 60" MOTORIZED INFEEDING ROTARY TABLE GIDDINGS & LEWIS G60 FCXS RIGHT ANGLE HEAD MOUNT CNC & MANUAL HORIZONTAL BORING MILLS GIDDINGS & LEWIS Model G60-FX 6 CNC Floor Type Horizontal Boring Mill with (2) 48 x 72 Tables, 288 X-Axis, 108 Y-Axis, 48 Z-Axis Travel, #50 Taper Spindle Speeds RPM, 40 HP, Power Draw Bar, Hardened Runways, G&L 8000M CNC Control (New 2002), mfg.1980, sn: (#1621) Located: Lester, PA GIDDINGS & LEWIS Model 70A-DP4-T 4 Manual Table Type Horizontal Boring Mill with 36 x 74 Table, 72 X-Axis, 60 Y-Axis, 55 Z-Axis Travel, #50 Taper Spindle Speeds RPM, Soft Vertical Ways, Missing:Machine Crank Handle & Floor Mounted Table Outriggers, sn: (#1790) Located: York, PA HORIZONTAL BORING MILL ACCESSORIES, TAILSTOCKS, ANGLE PLATES WOTAN 67 x 60 Motorized Infeeding Rotary Table with 67 x 60 Table, Table Infeed, 31.5 Table Height, Pendant Control, Power Clamping, 4 Position Shot Pin, Manual Lighted Scale (#1725) Located: Lester, PA GIDDINGS & LEWIS Model G60 FCXS Right Angle Head Mount, was used on a 6" G&L Floor Type Horizontal Boring Mill Model G60-FCXS, Has a Latch Plate Type Mounting Pins, Cam Lock Pins are Removable, Adapter Only, No Head, mfg.1988 (#1864) Located: Lester, PA SELLERS Traveling Outboard Tailstock Support with 96 Vertical Travel of Bearing Support, 8 Hole Diameter, 6 Width Way Surface Bed, 35 Overall Width of Way Surface, Power Vertical & Horizontal Travel, Removed from 8 Ingersoll Floor Type Boring Mill, Motor & Gear Missing on Horizontal Travel, Small Crack in Saddle (#1637) Located: Lester, PA GRAY Outbound Tailstock Support with 84 Vertical Travel of Bearing Support, 36 Travel on Runway, 7 Hole Diameter in Bushing, 7 Width Way Surface, 30 Overall Width of Way Surface, Power Vertical & Horizontal Travel, Manual Scales, mfg.1968 (#1641) Located: Lester, PA 50 Taper Boring Bars, 151 Long x 6 Boring Bar (#1645) Located: Lester, PA DEVLIEG Stack-Up Angle Plate 20-1/2 x 40 x 21 Stacked Dimensions, 20-1/2 x 21 x 20 Bottom Angle, 20-1/2 x 19 Top Angle (#2087) Located: Charlotte, NC SELLERS TRAVELING OUTBOARD TAILSTOCK SUPPORT DEVLIEG STACK-UP ANGLE PLATE GRAY OUTBOARD TAILSTOCK SUPPORT 50 TAPER BORING BARS 3

4 MACHINERY INSPECTION DATE & TIME CALL (888) FOR APPOINTMENT KING HI-COLUMN VERTICAL BORING MILL UPFIT 2013 VERTICAL BORING MILL KING Hi-Column Vertical Boring Mill with 52 4-Jaw Table, 66 Max. Swing, 72 Height Under Rail, RPM Variable Table Speeds, 75 HP, Right Hand Swivel, Turret, Side Head, Retrofit to DC Drive by KING, 2013 Up-fit, sn:20112 (#1727) Located: Houston, TX MANUAL ENGINE LATHES POREBA 53 x 236 Manual Engine Lathe Model TR135 B1 x 6M with Swing Over Bedways, Swing Over Cross Slide, Distance Between Centers, 18 Spindle Speeds RPM, Hardened Bedways, Inch / Metric Threading, Taper Attachment, 6-Way Power Rapid Traverse, Jaw Chuck, 39 3-Jaw Chuck, Tailstock, Steady Rests, mfg.1980 (#1877) Located: Lester, PA TOS 24 x 130 Manual Engine Lathe Model SUS-63 with 24 Swing over Bedways, 14 Swing Over Cross Slide, 130 Distance Between Centers, 3 Spindle Bore, Inch / Metric Threading, 18 4-Jaw Chuck, Steady & Follow Rests, 4-Way Toolpost, sn: , mfg (#1967) Located: Santa Barbara, CA POREBA TR135 B1 X 6M 53" X 236" MANUAL ENGINE LATHE TOS SUS-63 24" X 130" MANUAL ENGINE LATHE 4

5 ONLINE AUCTION SALE DATE & TIME BIDDING CLOSES TUESDAY, AUGUST 1:00 P.M. EDT 2006 (CTRL) MONARCH 40/25 48" X 156" CNC FLAT BED LATHE 2007 CNC FLAT BED LATHES MONARCH 48 x 156 CNC Flat Bed Lathe Model 40/25 with 48 Swing Over Bed, 33.5 Swing Over Cross Slide, 156 Between Centers, 4.12 Hole Through Spindle, 50 HP, 6 Position Indexable Turret, RPM, 24" Chuck with 10.5" Hole, 36" Chuck with 6" Hole, (2) Steady Rests 28" and 20", Tooling, Extra Turret Base, FAGOR 8055 CNC Pendant Controls (2006), sn:50287 (#1806) Located: Indian Trail, NC MAZAK Model M-5B 24 x 82 M-5N CNC Flat Bed Lathe with X-Axis, Z-Axis, Max. Swing, Max. Machining Diameter, Max. Machining Length, 4.09 Spindle Bore, 20.75" Kitagawa 3-Jaw Chuck with 5.5"Hole, 8-Position Front Vertical Turret, 6-Position Rear Horizontal Turret, Steady Rest, Programmable Tailstock, Live Center, Jorgensen Chip Conveyor, Electric Foot Switch, Tooling, MAZATROL 640T CNC Control, Low Hours, sn:195906, mfg.2007 (#1915) Located: Lester, PA CNC TURNING CENTERS (2) MIGHTY VIPER Model VT-25BL CNC Turning Centers with 20.4 Swing x 48 Between Centers, 41 Maximum Turning Length, Capacity to 10 Chucks, Spindle Speeds to 4000 RPM, 12 Station Turrets, Tool Presetter & Chip Conveyors, FANUC Series Oi-TD CNC Controls, sn: , mfg.8/2011 sn: , mfg.9/2011 sn: , mfg.8/2011 sn: , mfg.9/2011 (#1920, 1921) Located: Indian Trail, NC HAAS Model SL-20T CNC Turning Center with 9.3 X-Axis, 21 Z-Axis Travel, 3.5 Spindle Bore, 2 Bar Capacity, 15 Max. Cutting Diameter, 21 Max. Cutting Length, Spindle Speeds to 4000 RPM, 20 HP, A2-6 Spindle Nose, Swing Over Cross Slide, Tailstock, 12 Position Turret, Sludge Tank, Chip Auger, HAAS CNC Control, sn:62954, mfg.2000 (#2125) Located: Indian Trail, NC HAAS SL-20 CNC Turning Center with 9.3 X-Axis, 21 Z-Axis Travel, 3.5 Spindle Bore, 2 Bar Capacity, 15 Max. Cutting Diameter, 21 Max. Cutting Length, Spindle Speeds to 4000 RPM, 20 HP, A2-6 Spindle Nose, Swing Over Cross Slide, 12 Position Turret, Sludge Tank, Chip Auger, HAAS CNC Control, sn:62954, mfg.1999 (#2126) Located: Indian Trail, NC MAZAK M-5B 24" X 82" M-5N CNC FLAT BED LATHE CONTINUTED ON PAGE HAAS SL-20T CNC TURNING CENTER HAAS SL-20 CNC TURNING CVENTER 5

6 MACHINERY INSPECTION DATE & TIME CALL (888) FOR APPOINTMENT AVAIL. (2) MIGHTY VIPER VT-25BL CNC TURNING CENTERS Want to Join Our Mailing List? Want to be Included in Blast announcing Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines and Tooling Featured in an Upcoming Auction? Want to Request a Brochure? Us at advertising@asset-sales.com or Fax a Request to (704) ! PRESS BRAKES AMADA Model Ton CNC Up-Acting Hydraulic Press Brake with 79 Overall Bending Length, 66.5 Distance Between Housings, Throat Depth, 3.9 Stroke Length, 5 HP, Operator 2-Axis CNC Control, Electric Foot Switch Controls, (8) Upper Tool Clamps, sn:its25020b50712, mfg.1995 (#1803) Located: Lester, PA PACIFIC Model Ton Hydraulic Press Brake with 14 Overall Bed Length, 12 6 Distance Between Housings, Cylinders & Electrics Updated 2016, Palm Buttons, Remote Foot Pedal Actuator, sn:2486 (#2124) Located: Seattle, WA AMADA TON CNC UP-ACTING HYDRAULIC PRESS BRAKE PACIFIC TON HYDRAULIC PRESS BRAKE 6

7 ONLINE AUCTION SALE DATE & TIME BIDDING CLOSES TUESDAY, AUGUST 1:00 P.M. EDT KOIKE ARONSON MYNUC400D 8' 8" X 43' PLASMA CUTTING MACHINE PEDDINGHAUS FPB1500-3E 177 TON CNC PLATE PUNCH Download A Lot Book at CONTROLLED AUTOMATION 2AT TON CNC PLATE PUNCH BURNING MACHINE KOIKE ARONSON Model MYNUC400D 8 8 x 43 Plasma Cutting Machine with 104 Max. Cutting Width, 516 Max. Cutting Length, 672 Total Rail Length, 360 Bevel Head Rotation, 3-D Link Plasma Contour Bevel Station (Added 2006), Kaliburn Proline AMP Plasma Cutting System, Digital Height Control, Synchronized Dual Side Rack & Pinion Drive System, Down Draft Table with Dust Collector, 460 Volts/3/60, FANUC 15M CNC Control, sn:m2796, mfg.1996 (#1588) Located: Lester, PA PLATE PUNCH & PLASMA PUNCH CONTROLLED AUTOMATION Model 2AT Ton CNC Plate Punch with 30 Throat Depth, 30 x 60 Plate Size, 2-5/16 Hole Size, 2 Punch Stroke, Hydraulic Punch Stripping, Programmable Repositioning, Programmable Layout Option, Assortment of Punch and Dies, IBM Compatible CNC Control, sn:97-71, mfg.1996 (#1801) Located: Lester, PA PEDDINGHAUS Model FPB1500-3E 177 Ton CNC Plate Punch with Plasma Cutting Torch with 60 Max. Plate Width, 1-1/4 Plate Thickness, 850 IPM Feed Rate, 2.25 Punch Stroke Length, Triple Gag Punch Head, Hypertherm HT Amp Plasma Cutting Unit, Slug Vacuum Removal System, 20' Power In Feed Conveyor (60" Wide), 10' Idler Roll Exit Conveyor (60" Wide), Torit Downflow 8-Cartridge Dust Collector, FAGOR 8025 CNC Control, mfg.1999 (#1918) Located: Lester, PA SHEAR CINCINNATI Model x 3/8 Mechanical Plate Shear with 16 x 3/8 Capacity, 48 Backgauge Range, 17 Holddowns, 48 Front Operated Power Backgauge, Left Hand Squaring Arm, Palm Buttons, (3) Extra Blade Sets, sn:24668, mfg.1966 (#1847) Located: TN TANK TURNING ROLLS ARONSON Model WRD Ton Tank Turning Rolls Driver & Idler with 28 Roll Diameter, 16 Roll Face, 2-64 IPM Speed Range, 5 HP, Infinitely Variable Turning Speeds, Pendant Controls, Idler Roll (#1819) Located: Lester, PA CINCINNATI ' X 3/8" MECHANICAL PLATE SHEAR 7 ARONSON WRD TON TANK TURNING ROLLS DRIVER & IDLER

8 MACHINERY INSPECTION DATE & TIME CALL (888) FOR APPOINTMENT CRITERION HYDRAULIC TUBE FABRICATION WORK CELL PINES #2 PLC HYDRAULIC TUBE BENDER SOUTHWEST REFINISHING PAINT BOOTH (2) ESCOMATIC D2 3/16" COIL FED SWISS SCREW MACHINES BENDING & FORMING MACHINE CRITERION Hydraulic Tube Fabrication Work Cell Used for Manufacturing Farm Tractor Roll Cages, Consists of Hydraulic Bending Station with Tooling for 2 x 3 and 2 x 4 x 3/16 Square Tube and 5 Bend Radius, Drilling Station with (2) Drill Heads, Piercing Station with 4-Post Press, (5) Punch Stations, 12 x 28 Work Area, PLC Control System, Machine Was Purchased and Installed 2004 for $280,000 (#1556) Located: Lester, PA TUBE BENDER PINES #2 PLC Hydraulic Tube Bender with Approx. 40 Over Mandrel, Mandrel Extractor, Pressure Die Assist, PINES Dialabend #6 PLC Control, sn: , mfg.2003 (#1956) Located: Monclova, OH PAINT BOOTH SOUTHWEST Refinishing Paint Booth with 12 H x 37 W Door, 31 x 15 x 16 Outside Dimensions, 40 x 30 Inside Dimensions, Down Draft System, (2) 30 HP Exhaust Fans, 40 HP, Roof Mounted Make-Up Air Unit Gas (#2135) Located: West Virginia SCREW MACHINES (2) ESCOMATIC Model D2 3/16 Coil Fed Swiss Screw Machines with Max. Stock Diameter, Production Range Output, 2 Rotating Cutting Tools, RPM Toolhead Speeds, sn:1174 (#1711 & 1712) Located: New Hampshire 8

9 ONLINE AUCTION SALE DATE & TIME BIDDING CLOSES TUESDAY, AUGUST 1:00 P.M. EDT 1998 SOUTHBEND MX75/2500 8' ARM X 20" COLUMN RADIAL ARM DRILL CARLTON 5' ARM X 15" COLUMN RADIAL ARM DRILL KENT 818-AHD 8" X 18" 3-AXIS HYDRAULIC SURFACE GRINDER Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) ! We Pay Great Finder s Fees! RADIAL ARM DRILLS SOUTHBEND Model MX75/ Arm x 20 Column Radial Arm Drill with RPM, T-Slotted Base, sn: (#2133) Located: Indian Trail, NC CARLTON 5 Arm x 15 Column Radial Arm Drill with RPM, 10 HP, Dual Controls, sn:3a 3055 (#2134) Located: Indiana (3) GIDDINGS & LEWIS / WINSLOW EXACTAMATIC DRILL POINT GRINDERS Registration and Bidding at SURFACE & CYLINDRICAL GRINDERS KENT Model 818-AHD 8 x 18 3-Axis Hydraulic Surface Grinder with 10 x 20 Actual Working Capacity, 19 Spindle to Table, 10 Cross Movement, Incremental Downfeed, Hydraulic Table & Electronic Crossfeed, 8" x 18" Walker Permanent Magnetic Chuck, Magnetic Separator with Paper Filtration Coolant System, mfg.1998 (#2091) Located: Indian Trail, NC CINCINNATI 12 x 36 Universal Cylindrical Grinder with 12 x 36 Capacity, 12 Max. Swing Over Bed, 36 Distance Between Centers, Variable Speed Workhead with Tail Stock, Universal Grinding Head, Swing Down Internal Grind Motor (No Spindle), Coolant System, Assorted Centers, sn:2u3dil-95 (#1867) Located: Indian Trail, NC (3) GIDDINGS & LEWIS / WINSLOW Exactamatic Drill Point Grinders (#701, 703, 705) Located: Cincinnati, OH CINCINNATI 12" X 36" UNIVERSAL CYLINDRICAL GRINDER 9

10 MACHINERY INSPECTION DATE & TIME CALL (888) FOR APPOINTMENT AEM D " BELT GRINDER & DEBURRING MACHINE BELT & MICRO TAPE SANDERS AEM Model D Belt Grinder & Deburring Machine with 20 x 38 Front Table Dimensions, 3/16-6 Height Under Belt, Rubber Belt, Pneumatic Tension, Pneumatic Tracking, sn:wb6859, mfg.1994 (#1802) Located: Holland, OH (2) MASCO Single Spindle Vertical Micro-Finishers with Abrasive Tape Width, 450 Abrasive Table Length, 9.5 Abrasive Tape Max Diameter, 5 HP, Headstock Tailstock, (2) Micro-Finishing Heads with Tape Feed Mechanisms, Oscillation- Auto Cycle, Hydraulic Unit, Coolant System with Separate Coolant Filtration, Automatic Lubrication System, sn: (#1717) sn: (#1718) Located: Cincinnati, OH WELDING EQUIPMENT PECK SPUD & BOSS Model P3W3H Horn Welder For Circle Welding Tank, Shells and Drums Diameters, Spuds, Nipples, Coupling, and Bosses Capacity ½ 6 Diameters, ¼ 2-1/2 High, 30 x 36 Adjustable Table and 750 Amp Miller CP-5VS Welder. (#1757) Located: Indian Trail, NC (2) MASCO SINGLE SPINDLE VERTICAL MICRO-FINISHERS GENESIS Model CRZ-ST CNC Weld Cell with Fanuc 100iBe Robot with Robot Reach, 37 Stroke, Load Height, Tool Length, Tool Swing Diameter, CRZ-ST Single Trunnion Positioner, Lincoln Power Wave 455M/STT Power Supply, Wire Drive and Drive Roll Kit, Tregaskiss 500-Amp 22 Degree Air Cooled Torch, Genesis Torch with Wrist Alignment Station, AP Torch Reamer with Mister, FANUC Arc Mate 6-Axis 100iBe Robot, Fanuc System RJ3iC Control, mfg.2009 (#2052) Located: Lester, PA PRESS FEED EQUIPMENT AMERICAN STEEL LINE Model ,000lb x 42 Motorized Reel, 72 Coil OD, ID Range, Hydraulic Expansion, V/S Drive, Forward / Reverse / Jog, sn:6508, mfg.1981 (#1224) Located: TN ROWE Model ST x 0.65 Straightener with Capacity, 30 Wide, 7 Straightening Rolls, Entry and Exit Pinch Rolls, Variable Speed, sn:11073 (#0925) Located: Toledo, OH PA INDUSTRIES Motorized Double End Uncoiler 16 Wide Mandrels, 22 Inner Coil Capacity, 48 Outer Coil Capacity, Motorized, Head Rotates 360 Coil Back Plates (#1004) Located Monclova, OH PECK SPUD & BOSS P3W3H HORN WELDER 2009 GENESIS CRZ-ST CNC WELD CELL PA INDUSTRIES MOTORIZED DOUBLE END UNCOILER AMERICAN STEEL LINE 20,000LB X 42" MOTORIZED REEL 10 Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can Arrange for a Third Party Logistics Firm to Manage the Removal Process for Them.

11 ONLINE AUCTION SALE DATE & TIME BIDDING CLOSES TUESDAY, AUGUST 1:00 P.M. EDT COMBILIFT 8,000LB PROPANE MULTI-DIRECTIONAL FORKLIFT COMBILIFT 9,000LB DIESEL MULTI-DIRECTIONAL FORKLIFT Want to Join Our Mailing List? Want to be Included in Blast announcing Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines and Tooling Featured in an Upcoming Auction? Want to Request a Brochure? Us at advertising@asset-sales.com or Fax a Request to (704) ! 5 TON X ' SPAN BRIDGE CRANE NATIONAL BROACH RED RING GEAR SHAVER GEAR SHAVER NATIONAL BROACH Red Ring Gear Shaver (#1495) Located: Statesville COMBILIFT & FORKLIFTS COMBILIFT 8,000lb Capacity Propane Multi- Directional Forklift, Model CL20080 LA47/48 with 46 Forks, 86 2-Stage Mast, sn:17514, mfg.11/2007 (7,280 hrs) Located: Southbend, IN COMBILIFT 9,000lb Capacity Diesel Multi-Directional Forklift, Model CL2009ODA 53 with 53 Forks, Stage Mast, sn:4456, mfg.4/2005 (10,709 hrs) Located: Southbend, IN BRIDGE CRANE 5 Ton x Aprrox. 100' Span Bridge Crane with Pendant Controls, Located: Denver, CO Registration and Bidding at (7) GREENLEE Job Boxes BASIC ELECTRIC (12) Fiberglass Contractor Ladders (125+/-) On / Off Switch Boxes (Located under Shed Roof) (6) ADRIAN Stainless Steel Diamond Plate Full Size Truck Tool Boxes CLARK 2,000lb Capacity Propane Forklift, 4 Tires, 2 Stage Mast, sn:c20p JCB Model 506B Rough Terrain Loadall Forklift, 6,000lb Base Capacity, 3-Stage Telescopic Boom, 4-Way Steering, Diesel Engine, 4,950 +/- Hours on Hour Meter, Engine sn:794130b, VIN:S1B506B0VE ,000 Square Feet Warehouse Full of Electrical Contractor Supplies Including New Switchgear, Lights, Fuses, 10 +/- Reels of Electrical Cable, Hand Tools, HILTI Hand Tools, Scaffolding, (2) Sheds with Hand Tool Contents, RIDGID Tools, Benders, Core Drill, Heater, Etc. (4) Mobile Job Trailers 11

12 MACHINERY INSPECTION DATE & TIME CALL (888) FOR APPOINTMENT 12

13 Turning Your Assets into Dollars Asset Sales, Inc. Corporate Headquarters 301 Post Office Drive, Suite C Indian Trail, North Carolina Toll Free: Direct: Fax: Asset Sales Inc. Lance Mannion North Carolina 6625 & 6003 Presorted First Class Mail U.S. Postage PAID Eugene, Oregon Permit No. 17 KING HI-COLUMN VERTICAL BORING MILL ABBREVIATED TERMS & CONDITIONS OF AUCTION YOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT IT IS All bidders are responsible for all applicable taxes, in addition a 18% Buyer s Premium is implemented for all PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR online sales. REMOVE BY DESIGNATED DATE. Rigging/ Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is Subject to amendments and modifications announced by Asset Sales, Inc. and Bidspotter at the time of the complete. All heavy rigging will require a certificate of insurance for $1,000, naming Asset Sales, auction, any person participating in the webcast auction will be bound by the following terms and conditions. Inc. as the insured. Neither Asset Sales, Inc. nor Bidspotter warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein. ALL ONLINE SALES ARE FINAL, ON AN AS IS WHERE IS, IN PLACE, WITH ALL FAULTS BASIS. All articles will be sold to the highest webcast bidder conforming to the bid process in accordance to the AUCTION COMPANY S TERMS & CONDITIONS COMPLETE COPIES AVAILABLE AT SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be removed in the time allocated by Asset Sales, Inc.. No item, no matter how small or how far the purchaser has to travel, may be removed until after the online auction is completely closed. All payments shall be by wire transfer. All bidding and invoicing will be in US Dollars ($). UPCOMING AUCTIONS THURSDAY, JULY 20th - Graphics & Mailing Service Late Model Digital Inkjet Printers, Feeders & Folding ONLINE ONLY * Montgomery, AL TUESDAY, JULY 25th - Eastview Mfg. Inc. CNC Precision Swiss Screw Machines & Centerless Grinders ONLINE ONLY * Elgin, IL THURSDAY, JULY 27th - Vero Machine Industries CNC Aerospace Manufacturer Onsite / Online Vero Beach, FL REGISTRATION & BIDDING ONLINE: When participating as a buyer via Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The preapproval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions. ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED. ONLINE AUCTION MAJOR MANUFACTURERS CNC & MANUAL MACHINERY BIDDING CLOSES TUESDAY, AUGUST 1:00 P.M. EDT