IN00571 (Iss 2) L Shaped Bath Screen. Instruction suitable for both Right and Left Hand Fixing.

Size: px

Start display at page:

Download "IN00571 (Iss 2) L Shaped Bath Screen. Instruction suitable for both Right and Left Hand Fixing."

Darren McDowell
5 years ago
Views:

1 IN00571 (Iss 2) L Shaped Bath Screen Instruction suitable for both Right and Left Hand Fixing.

2 Before You Start Check that the bath has been installed correctly and that it is level. Please Note: All product supplied without bath. Check that there is sufficient space on the bath for the product and that the screen movement does not impact on other items such as sinks and taps. Ensure the product is fitted to a non-porous surface ie. tiled. Check that the wall surface is flat. Unpack and check the product is complete and undamaged, (refer to Parts & Fittings Supplied and Loose Screws & Fittings Supplied sections for details. Fixings are supplied for solid walls only. Ensure that the correct fixings are used for the wall type if in doubt seek professional advice. Ensure the area is clean, dry and dust free. Read the instructions in full. Have the correct tools available, (as shown below, see Tools Required ). Fig.A. Safety Handle all glass with care - support on cardboard to avoid risk of breakage. This product is heavy and requires 2 people to carry and install it. Check walls first for hidden pipes and cables before drilling. All glass is toughened it cannot be reworked or replaced by ordinary glass. Use safety eyewear when drilling. Use safety eyewear when handling glass. Keep all small parts away from children. Disclaimer Please notify the retailer immediately of any damage or faults. The manufacturer cannot be held responsible for any installation costs that may arise from damaged or faulty product being installed. Please dispose of all packaging with due regard to the environment. Tools Required (not supplied) Spirit Level Screwdriver Tape Measure Pencil Utility Knife Scissors Silicone Gun & Sealant Power Drill Suitable Drill Bits 6mm dia. * 3mm dia. HSS * Ensure drill bit used is suitable for wall surface

3 Parts & Fittings Supplied D1 Keep small parts away from children Large Glass Panel Assembly Corner Fixing Bracket X2 Corner Channel D3 D2 Large Horizontal Seal (Cut to suit) Short Glass Panel Short Horizontal Seal We have taken great care to ensure that this product reaches you in perfect condition. However should any parts be damaged or missing please contact your point of purchase. This does not affect your statutory rights. In addition if you require replacement parts your point of purchase will be happy to assist.

4 D1 End Cap Wall Channel B Stile End Cap A C D E D2 D3 Towel Rail Assembly Corner Channel End Cap F

5 Loose Screws & Fittings Supplied Qty A No.8 x 1½ Pan Head Pozi Screws (actual size) x3 Qty B Wall Plugs (actual size) x3 Qty C Screw Snap Cap Base (actual size) x3 Qty D No.8 x ⅜ Pan Head Pozi Screws (actual size) x3 Qty E Screw Snap Caps (actual size) x3 Qty F No.6 x ½ Pan Head Pozi Screws (actual size) x1

6 Inside View Inside View Ensure Large Glass Panel Assembly is positioned with Drain facing inwards Drain 1.2 Inside View Fix Corner Channel and Short Glass Panel to Large Glass Panel Assembly using Corner Fixing Brackets provided OUTSIDE FACE BATH SIDE IMPORTANT NOTE: Ensure Drain is on the inside, (facing towards the bath).

7 2 Position Glass Screen assembly into Wall Channel. DO NOT FIX at this stage.

8 Plan View 3 Ensure gap from the front of the bathto the front of the bath is equal and straight. Position glass screen assembly and mark Wall Channel position. DO NOT FIX at this stage.

9 * Tip: When drilling tiles apply masking tape to surface to stop drill bit slipping. Wall plugs supplied are for solid walls only. Ensure correct wall plug for wall type is used. If in doubt seek professional advice. 4.1 Mark position pre-drilled Wall Channel holes Position wall channel on wall. Ensure channel is vertically level and does not overhang the bath * * 6mm dia. holes with drill bit suitable for wall surface B 4.3 A

10 Inside View 5 Inside View Drain OUTSIDE FACE BATH SIDE IMPORTANT NOTE: Ensure Drain is onthe inside, (facing towards the bath). Inside View 6 * 3mm dia. holes through pre-drilled wall channel holes using HSS drill bit Inside View 6.1* C D 6.2 E

11 7.1 7 Push fit Large Horizontal Seal into position 7.2 Push fit Short Horizontal Seal into position

12 8 F Fix Corner Chanel End Cap using screw provided

13 9 Inside View Fix Towel Rail onto Large Glass Panel Assembly into pre-drilled holes.

14 Push fit Wall Channel End Cap and Stile End Cap into position. 11 * Product Care: Use a non abrasive cleaner. Water marks may be removed with a proprietary limescale remover or household vinegar. 150mm Apply Silicone Sealant, (not supplied).

15 Notes:

16 Notes:

Half framed 2-Panel Bath Screen

IN00573 (Iss 2) Half framed 2-Panel Bath Screen Instruction suitable for both Right and Left Hand Fixing. Before You Start Check that the bath has been installed correctly and that it is level. Please