THICKNESSER OPERATING INSTRUCTIONS. To view our entire range visit MODEL NO. OZT1500WA

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "THICKNESSER OPERATING INSTRUCTIONS. To view our entire range visit MODEL NO. OZT1500WA"

Transcription

1 THICKNESSER 1500W MODEL NO. OZT1500WA OPERATING INSTRUCTIONS To view our entire range visit 1208

2 SPECIFICATIONS - MODEL NO. OZT1500WA Motor: 1500W Input: 240V ~ 50Hz No Load Speed: 9500/min Cutting Width: 330mm (13") Max. Stock Thickness: 152mm (6") Cutting Depth: mm Protection Class: 1 (earthed appliance) Working Table: 330 x 235 mm (13" x 9 1 4") Feeding Speed: 7m/min Weight: 32kg Features: post design Dust extraction port Overload protection Reversible HSS blade Material support rollers Anti-kickback Top Rollers 2. Depth Adjustment Handle 3. Brush Holder Assembly 4. Carry Handle 5. Depth Indicator 6. Depth Scale 7. Out-feed Table 8. Main Table 9. In-feed Table 10. Base 11. In-feed Roller Housing Frame 13. Anti-kickback fingers 14. Switch Cover/Emergency Stop 15. On/Off Switch 16. Overload Switch 17. Dust Chute 18. Cutter Head 19. Mounting holes 20. 4mm Allen Key 21. Hose Adaptor

3 TABLE OF CONTENTS SPECIFICATIONS Page 2 TABLE OF CONTENTS.. Page 3 INTRODUCTION... Page 4 SAFETY INSTRUCTIONS Page 5 ASSEMBLY.. Page 9 OPERATION.. Page 9 MAINTENANCE... Page 12 TROUBLE SHOOTING. Page 13 CONTENTS... Page 14 WARRANTY Page 16 3

4 INTRODUCTION Congratulations on purchasing an Ozito Thicknesser. We aim to provide quality tools at an affordable price. We hope you will enjoy using this tool for many years. Your Thicknesser OZT1500WA has been designed for cleaning up and re-sizing twisted, sawn and recycled timber. It is intended for DIY use only. SAFETY INSTRUCTIONS! Warning! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. Read the whole manual carefully and make sure you know how to switch the tool off, in an emergency, before operating the tool. Save these instructions and other documents supplied with this machine for future reference. ELECTRICAL SAFETY The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. Using an Extension Lead Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock It is recommended that the extension lead is a maximum of 25m in length. Do Not use multiple extension leads.. 4

5 GENERAL SAFETY RULES! Warning! Read all instructions, Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term Power Tool in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) WORK AREA a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) Replacement of the supply cord. If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer. f) Replacement cord instructions for type Y attachment: Method of attachment of the supply cord such that any replacement is intended to be made by the manufacturer, its service agent or similar qualified person. g) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. h) Have your tool repaired by an electrician or a power tool repairer. This power tool complies with relevant safety requirements. To avoid danger, electrical appliances must only be repaired by qualified personnel using original spare parts; otherwise this may result in considerable danger to the user. 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. 5

6 GENERAL SAFETY RULES (cont.) c) Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that can not be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools, unplugged & out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 6

7 ADDITIONAL SAFETY RULES FOR THICKNESSERS This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance. Always wear eye and hearing protection when operating this machine. Always wear a breathing mask to reduce the risk of inhalation of harmful dust. Prior to operation, ensure that all guards are in place. Any parts, if damaged, must be repaired properly or replaced. Check and ensure that all fastening screws and bolts are securely tightened prior to starting the machine. Set up the machine on solid, stable surface so that the table is horizontal and the machine cannot tip over. Never work with pieces which are too big or too small for the machine's capacity. Before planing, examine the work piece for metal objects and stones and remove them if necessary. Do not force the work piece through the machine. Allow the feeding rollers to guide the work piece through the planer thicknesser. When planing thin pieces of timber, suitable devices must be used to ensure that these small pieces are properly positioned and guided. Keep the feed rollers free of wood chips and sawdust. If the movement becomes clogged, kickback can occur. The anti-kickback device of the planer must be checked regularly to ensure that it remains in proper working condition. All pawls of this device must move freely and must drop down by their own weight when lifted. The point of these pawls must be kept sharp. Do not begin planing until the cutter head has reached full speed. When planning, take up a working position so that you are always on one side of the machine away from the area directly in front of or behind the cutter head. Always keep your hands well away from the cutter head or the chip ejection area while the machine is running. Never place hands near the cutter head unless the machine is switched off and disconnected from the power supply. A uniform feed rate when planing increases the life of the blades and reduces the risk of accidents. The blades must be sharpened or replaced in good time as blunt blades do not only increase the risk of kickback, but also impose an unnecessary load on the motor. Check that the blades are fitted correctly before commencing operation. 7

8 ADDITIONAL SAFETY RULES FOR THICKNESSERS (cont.) Always stop the motor and disconnect from power source before performing any adjustments or maintenance. The sawdust created by planing makes it difficult to see as clearly as necessary and can impair the operator's health in certain circumstances. If not working outdoors or on well ventilated premises, the machine must be connected with the dust extraction port to an extractor unit, such as a small portable dust extractor. When operating for a long period, the air velocity must be at least 20 m/s (65.6 ft/sec.) The sound pressure level at the workplace generally exceeds 85 db(a). Users should therefore wear ear protectors. When operating the machine outdoors, use of an earth-leakage circuit-breaker is recommended. Any work on the electric components of the machine must be carried out only by a qualified electrician. Only original spare parts and accessories must be used. Otherwise the manufacturer does not offer any warranty and does not accept any liability. Regular cleaning of the machine is an important safety factor. Before beginning this task, disconnect the power. Never use the machine without the appropriate guard in place and correctly adjusted; Do not use knives which are blunt as this increases the danger of kickback. For planers: Any portion of the cutter block not being used for planing shall be guarded; When planing short workpieces a push-stick should be used; When planing narrow workpieces additional measures, such as the use of horizontal pressure devices and spring loaded guards, may be necessary to ensure safe working; The planing function should not be used to cut rebate, recess, tenon or mould. For thicknessers: Regularly inspect the anti-kickback finger assembly and the feed mechanism to ensure their effectiveness. Tools equipped with chip collection and extractor hoods shall be connected to the dust-and-chip-collecting device. 8

9 ASSEMBLY Unpacking The tool weighs 32kg. Ensure that the tool is lifted with the help of another person. Open carton and remove top packing material. Lift tool from the carton and place it on a stable surface. Unwrap cord from cord storage (Fig. 1) under the out-feed table (7). Lower in-feed and out-feed tables (9 & 7). 7 Remove packing from between cutter head (18) and main table (8). Remove protective film from main table (8). Fig. 1 Bench Mounting The 4 mounting holes (19) on each corner of the base of the machine are provided to facilitate bench mounting (mounting bolts not supplied). Height Adjustment Handle Assemble height adjustment handle (2) prior to operation. To assemble, remove screw cover at the end of the height adjustment handle (2). Align with post protruding from the top of housing frame (12). Secure with screw and washer to the post with allen key (20) supplied located under the in-feed table (9) Dust Extraction Fit a 50mm diameter hose to dust chute (17). Alternatively, fit the dust adaptor (21) to the dust chute (17). This will enable you to fit a 100mm diameter hose for dust extraction. OPERATION On/Off Switch To turn the machine on, lift the switch cover (14) and push the green button on/off switch (15). Allow the motor to reach maximum speed prior to inserting the work piece. To turn the machine off, push the switch cover (14). Allow the machine to come to a complete stop. 9

10 OPERATION (cont.) Overload Protection This machine is fitted with overload protection. Should the motor be under excessive load during operation, the overload protection switch (16) will be activated. When this occurs, push the switch cover (14) and the turn off the power supply. Allow the machine to cool down for several minutes. Switch the power back on at the power supply and push the overload switch (16). To turn the machine on, lift the switch cover (14) and push the green button of the on/off switch (15). Continue planing and be aware of the load you are placing on the motor. It may be necessary to reduce the cutting depth of cut per pass for the work piece, to reduce the load. Depth of Cut Adjustment The depth of cut is indicated by the depth scale (6). The depth scale (6) indicates the distance between the main table (8) and the cutter head (18). The depth of cut is adjusted up or down by rotating the depth adjustment handle (2). Rotate anti-clockwise to increase the depth of cut. Rotate clockwise to decrease the depth of cut. One complete rotation of the depth adjustment handle (2) will increase or decrease the depth of cut by 2mm. Always start operation by making an initial cut of 0.5mm. Increase depth of cut gradually to get a smooth finish. Do not attempt to plane timber less than 5mm thick. Do not attempt to plane timber which is more than 152 thick. Do not attempt to plane timber which is less than 130mm in length. Anti-kickback Fingers Anti-kickback fingers (13) prevent the work piece being propelled back to the in-feed table (9) during operation. Avoiding kickback: Always hold the work piece firmly with both hands and ensure your body is positioned to the side of the machine 13 and not directly behind or in front of the work piece. Do not plane wet or warped timber. Ensure the work piece is free from nails or stones. Remove any loose knots in the work piece prior to planing. Use even, steady pressure when making a pass. Never force the work piece. 10

11 OPERATION (cont.) Snipe Snipe occurs when a work piece is tilted up or down when it is fed into or out of the Thicknesser. It appears as gouges near the ends of the work piece. Ways to avoid snipe: (1) Use properly adjusted roller stands at the in-feed and out-feed tables (7 & 9). (2) Mount the machine in a recess in a bench top with the in-feed table (9) and outfeed table (7) level with the bench. Removing Blades! Warning! Prior to adjustment, ensure you switch the machine off and disconnect in from the power supply. Blades need to be reversed or changed when they plane unevenly, roughly or score the timber. Adjust the cutter head assembly (18) to its maximum height by turning the height adjustment handle (2) clockwise. Remove the dust chute (17) by removing 4 bolts (A) as shown in Fig. 2 Turn the cutter head (18) carefully to access the blade assembly as shown in Fig 3. A For the following refer to Fig. 3. Fig. 2 Release the lock bar (C) and blade (B) by A loosening blade bolts (A) anti-clockwise with allen key supplied. The blade is spring loaded and will be push out when the bolts are loosened. B C Remove the blade and repeat for the opposite 18 side of the cutter head (18). Fig. 3 Assembling Blades! Warning! Prior to adjustment, ensure you switch the machine off and disconnect from the power supply. Either reverse or replace blades. Ensure springs Fig. 4 (A) are properly located in the cutter head (18). Position blade Fig. 3(B) on cutter head (18). Place blade lock bar Fig. 3(C) over the blade. A 18 11

12 OPERATION (cont.) Fix blade lock bolts Fig. 3(A) with allen key provided. Repeat above procedure for the blade in the opposite side of the cutter head (18). Fit dust chute (17).! Warning! Ensure blades are properly secured to the cutter head. If not properly secured, there is the potential of personal serious injury and/or damage should they become loose during operation. MAINTENANCE! CAUTION: Prior to doing any maintenance work always disconnect from the power supply. 1. Machine The Ozito Thicknesser OZT1500WA is designed with a low maintenance requirement. The bearings are lubricated for life. After approximately 10 hours of operation we recommend to lubrication of the following parts: Bearings of the feed-in and feed-out rollers. Bearings of pulley and gear wheel of the belt. Treat threaded spindles for the height adjustment of the thicknessing table with dry lubrication only. The table surface and rollers should always be kept clean of resin. Clean away any sawdust that has accumulated on the anti-kickback fingers. In order to prevent the motor from overheating. Regularly check that no sawdust has accumulated on the ventilation apertures of the motor. After a prolonged period of operation, users are recommended to have the machine serviced by an electrician or a power tool repairer. 2. Cutter head assembly The cutter head (18), blade lock bar Fig.3(c) and the blades Fig.3(b) used on the machine must be cleaned of resin regularly as a clean tool improves the cutting quality. This can be done by soaking the clamping devices, blade lock bar Fig.3(c) and the blades Fig.3(b) for 24 hours in paraffin, white spirit or commercially available resin remover. 3. Replace the carbon brushes Regularly check the carbon brushes (3) and replace them when they are shorter than about 5mm. Replace the carbon brushes as a pair. Keep the carbon brushes clean, allowing them to move freely in the brush holders. 12

13 TROUBLE SHOOTING Symptom Possible Cause Suggested Solution Machine cannot be switched on. Machine stops while thicknessing is in progress. Speed drops while thicknessing is in progress. Unsatisfactory finish. Dust chute blocked while thicknessing is in progress. Uneven feeding rate while thicknessing is in progress. Overload switch activates. No power. Carbon brushes worn. Overload switch activated. Blunt blades or excessive feed rate. Cutting depth too great. Feed rate too fast. Blunt blades. Blunt blades. Uneven feed. No dust extractor unit. Timber too damp. Rubber belt too loose. Rubber rollers dirty or worn. Cutting depth too great. Blunt blades. Check power supply. Replace carbon brushes. Determine the cause of the activation and rectify. Reverse or replace blades, or reduce feed rate. Reduce cutting depth. Reduce feed rate. Reverse or replace blades. Reverse or replace blades. Plane with constant pressure and reduce feed rate. Recommend to use a dust extractor unit while using the machine. Use dry, seasoned timber. Check the rubber belt, and change it If necessary. Clean or replace rubber rollers. Reduce cutting depth. Reverse or replace blades. 13

14 LABELS ON YOUR TOOL CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice. Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. 14

15 CONTENTS 1 x Thicknesser OZT1500WA 2 x HSS Blade (fitted) 1 x Hose Adaptor 1 x 4mm Allen Key 1 x Dust Extractor Chute 1 x Instruction Manual OZITO INDUSTRIES PTY LTD AUSTRALIA (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia Telephone: Website: 15

16 WARRANTY THIS WARRANTY FORM AND CONFIRMED BUNNINGS REGISTER RECEIPT SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES The warranty is only made available by returning the product to your nearest Bunnings Warehouse with a confirmed Bunnings register receipt. YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. SHOULD YOU HAVE ANY QUESTIONS PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY OR REPAIR PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Australia New Zealand TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. AN OZITO CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE. PURCHASED FROM: DATE PURCHASED: 3 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void. Professional, Industrial or high frequency use. If the tool has been operated on a supply voltage other than that specified on the tool. If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations. If the tool is disassembled or tampered with in any way. Note: Warranty excludes consumable parts such as carbon brushes, blades and other accessories.

MULTI FUNCTION SHARPENER

MULTI FUNCTION SHARPENER WHAT S IN THE BOX MULTI FUNCTION SHARPENER 65W INSTRUCTION MANUAL SPECIFICATIONS Motor: 65W No Load Speed: 6,700/min Wheel Diameter: 49mm (2 ) Sharpening Capacity Drill bit: 3-10mm Blade: 6-51mm Weight:

More information

Tile Cutting Saw 600W. OZTCS600WA. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

Tile Cutting Saw 600W.  OZTCS600WA. To view the full range visit: Instruction Manual 3 Year Replacement Warranty Tile Cutting Saw 600W Instruction Manual 3 Year Replacement Warranty OZTCS600WA! WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric

More information

PLANER 750W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PLR-5000 WHAT S IN THE BOX. Planer. Parallel Guide. Rebate Guide.

PLANER 750W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PLR-5000 WHAT S IN THE BOX. Planer. Parallel Guide. Rebate Guide. WHAT S IN THE BOX PLANER 750W INSTRUCTION MANUAL SPECIFICATIONS Voltage: Input Power: No Load Speed: Planing Width: Blade Type: Planing Depth: Rebate Depth: Weight: ozito.com.au 230-240V ~ 50Hz 750W 14,000/min

More information

WHAT S IN THE BOX DRILL BIT SHARPENER. Drill Bit Sharpener 95W INSTRUCTION MANUAL SPECIFICATIONS. Input Power: (1/8-15/32 ) ozito.com.

WHAT S IN THE BOX DRILL BIT SHARPENER. Drill Bit Sharpener 95W INSTRUCTION MANUAL SPECIFICATIONS. Input Power: (1/8-15/32 ) ozito.com. WHAT S IN THE BOX DRILL BIT SHARPENER 95W INSTRUCTION MANUAL SPECIFICATIONS Voltage: Input Power: No Load Speed: Working Capacity: Weight: ozito.com.au 230-240V ~ 50Hz 95W 1350/min 3mm-12mm (1/8-15/32

More information

ELECTRIC STAPLE NAIL GUN

ELECTRIC STAPLE NAIL GUN WHAT S IN THE BOX ELECTRIC STAPLE NAIL GUN 8MM - 14MM INSTRUCTION MANUAL SPECIFICATIONS Input: 230-240V ~ 50Hz Power: 45W Impact Rate: 30/min Staple Size: 8-14mm, Type 50 Nail Size: 15mm, C1 Brad Magazine

More information

Chainsaw Chain Sharpener

Chainsaw Chain Sharpener WHAT S IN THE BOX Chainsaw Chain Sharpener 85W INSTRUCTION MANUAL SPECIFICATIONS Motor: 85W Input: 230V-240V ~ 50Hz No load speed: 4,800/min Table/vice angles: 0 35 left & right Sharpening Wheel: Ø108

More information

18V CORDLESS STAPLER/NAILER

18V CORDLESS STAPLER/NAILER 18V CORDLESS STAPLER/NAILER MODEL NO: CONSN18LIC PART NO: 6487058 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0717 ISS2 2 INTRODUCTION Thank you for purchasing this CLARKE product. Before

More information

MINI RECIPROCATING SAW MODEL NO: CRS350M

MINI RECIPROCATING SAW MODEL NO: CRS350M CRS350M - Mini Reciprocating saw.fm Page 1 Thursday, November 22, 2012 9:41 AM MINI RECIPROCATING SAW MODEL NO: CRS350M PART NO: 6462550 OPERATION & MAINTENANCE INSTRUCTIONS LS1112 CRS350M - Mini Reciprocating

More information

Handling instructions

Handling instructions Nibbler Model CN 16SA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these

More information

SPECIFICATIONS - MODEL NO. MFR-250

SPECIFICATIONS - MODEL NO. MFR-250 MFR-250 manual.qxd 1/12/11 11:24 AM Page 2 SPECIFICATIONS - MODEL NO. MFR-250 Motor size: 250 Watt Input: 230-240V ~ 50Hz No load speed: 15,000-21,000/min Max. stroke length: 3.8mm Orbit angle: 3.2 Sanding

More information

Angle Grinder 230mm Watt

Angle Grinder 230mm Watt AGG-051K manual.qxd 9/24/09 9:48 AM Page 1 Angle Grinder 230mm - 2200 Watt Operation Manual 3 Year Replacement Warranty AGG-051K To view the full range visit: www.ozito.com.au 0909 AGG-051K manual.qxd

More information

TILE CUTTING SAW. 500W 115mm INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au TCS-115 WHAT S IN THE BOX. Tile Cutting Saw.

TILE CUTTING SAW. 500W 115mm INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au TCS-115 WHAT S IN THE BOX. Tile Cutting Saw. WHAT S IN THE BOX TILE CUTTING SAW 500W 115mm INSTRUCTION MANUAL SPECIFICATIONS Motor: 500W Input: 230 240V~50Hz No Load Speed: 5,200min 1 Blade: Ø115 x Ø22.2mm Max. Depth Of Cut: 24mm Table Size: 330

More information

10 x 6 Planer/Thicknesser

10 x 6 Planer/Thicknesser 01550 10 x 6 Planer/Thicknesser Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. 1 Specifications 2 Safety Rules.3-4 Unpacking.5

More information

LAMINATE TRIMMER 350W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LTM-3000 WHAT S IN THE BOX. Laminate Trimmer. Trimming Guide.

LAMINATE TRIMMER 350W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LTM-3000 WHAT S IN THE BOX. Laminate Trimmer. Trimming Guide. WHAT S IN THE BOX LAMINATE TRIMMER 350W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Power: 350W No Load Speed: 30,000/min Collet Size: 6.35mm (1/4 ) Weight: 1.7kg ozito.com.au Laminate Trimmer

More information

ROUTER 850W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au ROU-5000 WHAT S IN THE BOX. Router. Guide Fence. Dust Extraction Adaptor.

ROUTER 850W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au ROU-5000 WHAT S IN THE BOX. Router. Guide Fence. Dust Extraction Adaptor. WHAT S IN THE BOX ROUTER 850W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Input: 850W No Load Speed: 11,500-32,000/min Collet Size: 6.35mm (1/4 ) Plunge Depth: 30mm Turret Stops: 3 Weight:

More information

Instructions for Stone Cutting Machine

Instructions for Stone Cutting Machine Technical data Kg. Instructions for Stone Cutting Machine SCM600 3HP 2800rpm IP55 SCM800 3HP 2800rpm IP55 SCM1000 2800rpm IP55 SCM1200 2800rpm IP55 L=600 B=85(165) L=800 B=85(175) 500x510 0 or 45 600lt/h

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL 2 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire

More information

Instruction Manual. Manual de instrucciones. Guide d utilisation ET PMET Rev 808

Instruction Manual. Manual de instrucciones. Guide d utilisation ET PMET Rev 808 Instruction Manual Manual de instrucciones Guide d utilisation ET2025 PMET2025-8 Rev 808 www.arrowfastener.com GENERAL SAFETY RULES WARNING! Read all instructions. Failure to follow all instructions listed

More information

Power Planer 1900B/N1900B/1902

Power Planer 1900B/N1900B/1902 Power Planer 1900B N1900B 1902 SPECIFICATIONS Model 1900B/N1900B/1902 Planing width... 82 mm Planing depth... 1 mm Shiplapping depth... 9 mm No load speed (min -1 )...16,000 Overall length... 290 mm Net

More information

Auto Feed Screwdriver

Auto Feed Screwdriver ENGLISH (Original instructions) INSTRUCTION MANUAL Auto Feed Screwdriver 684 6843 6844 6846 0080 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 684

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Recipro Saw JR3050T DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Recipro Saw JR3050T DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Recipro Saw JR3050T 005783 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model JR3050T Length of stroke

More information

THIRD SHEET SANDER / 3 SHEET INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX TSS Third Sheet Sander. Dust Bag.

THIRD SHEET SANDER / 3 SHEET INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX TSS Third Sheet Sander. Dust Bag. WHAT S IN THE BOX THIRD SHEET SANDER 1 / 3 SHEET INSTRUCTION MANUAL SPECIFICATIONS Motor: No Load Spead: Pad Size: Weight: ozito.com.au 150W 11,000 opm 1 / 3 Sheet (187x90mm) 1.02kg Third Sheet Sander

More information

Quick Set Dovetail Jig

Quick Set Dovetail Jig Quick Set Dovetail Jig FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500359 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT

More information

HP2050 HP2050F HP2051 HP2051F

HP2050 HP2050F HP2051 HP2051F ENGLISH (Original instructions) INSTRUCTION MANUAL -Speed Hammer Drill HP050 HP050F HP05 HP05F 00989 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model

More information

18 GAUGE ELECTRIC METAL SHEAR

18 GAUGE ELECTRIC METAL SHEAR 241-9895 18 GAUGE ELECTRIC METAL SHEAR Operator s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in

More information

5 FUNCTION ROTARY HAMMER DRILL

5 FUNCTION ROTARY HAMMER DRILL 5 FUNCTION ROTARY HAMMER DRILL MODEL NO: CONRHD720 PART NO: 6480215 OPERATION & MAINTENANCE INSTRUCTIONS LS0712 INTRODUCTION Thank you for purchasing this CLARKE 5 Function Rotary Hammer Drill. Before

More information

CD714RE CD714CRE CD714CRES KR604CRES KR654CRES KR714CRES.

CD714RE CD714CRE CD714CRES KR604CRES KR654CRES KR714CRES. 4 6 5 7 3 1 2 www.blackanddecker.co.uk CD714RE CD714CRE CD714CRES KR604CRES KR654CRES KR714CRES English (Original instructions) 5 2 7 A B 10 11 12 14 15 12 C D 11 3 E F 3 6 7 G 4 Intended use Your Black

More information

SMD LED 240V WORKLIGHTS

SMD LED 240V WORKLIGHTS SMD LED 240V WORKLIGHTS SMD LED TECHNOLOGY ALUMINIUM & STEEL CONSTRUCTION SOFT GRIP HANDLE 5000K BRIGHT WHITE COLOUR KP2301, KP2302, KP2303, KP2304, KP2305 ED1/June 16 1 Table of Contents Know Your Product...

More information

TE 7-C. English. Printed: Doc-Nr: PUB / / 000 / 03

TE 7-C. English. Printed: Doc-Nr: PUB / / 000 / 03 TE 7-C English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use

More information

BENCH GRINDER & FLEXIBLE DRIVE

BENCH GRINDER & FLEXIBLE DRIVE WHAT S IN THE BOX BENCH GRINDER & FLEXIBLE DRIVE 120W 75mm INSTRUCTION MANUAL SPECIFICATIONS Voltage: Input Power: No Load Speed: Wheel: Wheel Bore: Wheel Max. Speed: Weight: 230-240V ~ 50Hz 120W 0 9,900/min

More information

20V CORDLESS CIRCULAR SAW

20V CORDLESS CIRCULAR SAW 20V CORDLESS CIRCULAR SAW MODEL NO: CCS20Li PART NO: 6487015 OPERATION & MAINTENANCE INSTRUCTIONS LS0113 INTRODUCTION Thank you for purchasing this CLARKE 20V Cordless Circular Saw. Before attempting to

More information

GUILD 135W Detail Sander

GUILD 135W Detail Sander GUILD 135W Detail Sander Instruction Manual PPS135G After Sales Support UK/Ireland 0333 3201989 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining

More information

Ireland Australia New Zealand

Ireland Australia New Zealand www.blackanddecker.com UK Ireland Australia New Zealand 2 B C 3 3 D 21 22 E 3 F G 4 26 M N 5 P Q R S 6 English Intended use Your Black & Decker sander has been designed for sanding wood, metal, plastics

More information

1800W VARIABLE SPEED ROUTER

1800W VARIABLE SPEED ROUTER 1800W VARIABLE SPEED ROUTER MODEL NO: CR3 PART NO: 6462081 OPERATION & MAINTENANCE INSTRUCTIONS LS1111 INTRODUCTION Thank you for purchasing this CLARKE 1800W Variable Speed Router. Before attempting to

More information

COJSAWBX Electric Jig Saw Assembly & Operating Instructions

COJSAWBX Electric Jig Saw Assembly & Operating Instructions COJSAWBX Electric Jig Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance.

More information

General Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must

General Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must General Safety All power tools can be dangerous if both general and tool specific safety instructions are not followed carefully. General safety instructions apply to all power tools, both corded and cordless.

More information

TE 30 TE 30-AVR TE 30-C-AVR

TE 30 TE 30-AVR TE 30-C-AVR TE 30 TE 30-AVR TE 30-C-AVR English Français Español Português en fr es pt 1 2 3 4 5 6 7 TE 30 TE 30-AVR TE 30-C-AVR en Original operating instructions....................................... 1 fr Mode

More information

Subject to change. USERS MANUAL Art.nr. PRM6006 PBF-1050N

Subject to change. USERS MANUAL Art.nr. PRM6006 PBF-1050N UK Subject to change UK USERS MANUAL Art.nr. PRM6006 PBF-1050N 0406-14 EXPLODED VIEW Fig. D Fig. A Fig. E Fig. B Fig. F Fig. C Fig. G 2 Powercraft Powercraft 11 SPARE PARTS LIST PBF-1050N REF NR DESCRIPTION

More information

HAND HELD SAW W MILL

HAND HELD SAW W MILL HAND HELD SAW W MILL 92247 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All

More information

1/4 Sheet Palm Sander

1/4 Sheet Palm Sander OWNER S MANUAL Model Number: PS160CA-3 1/4 Sheet Palm Sander TM Registration Card Inside CAUTION! To reduce the risk of fire, electric shock and personal injury, read and understand the owner s manual

More information

ROUND BENDING MACHINE Model: RBM30

ROUND BENDING MACHINE Model: RBM30 ROUND BENDING MACHINE Model: RBM30 Operation Manual SAVE THIS MANUAL:You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts

More information

Instruction Manual. 115mm ANGLE GRINDER. Model SROM 1183

Instruction Manual. 115mm ANGLE GRINDER. Model SROM 1183 Instruction Manual 115mm ANGLE GRINDER Model SROM 1183 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. PRODUCT FEATURES: 1. Spindle Lock 2. On/Off Switch

More information

20V CORDLESS JIGSAW. MODEL NO: CJS20Li OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0113

20V CORDLESS JIGSAW. MODEL NO: CJS20Li OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0113 20V CORDLESS JIGSAW MODEL NO: CJS20Li PART NO: 6487025 OPERATION & MAINTENANCE INSTRUCTIONS LS0113 INTRODUCTION Thank you for purchasing this CLARKE 20V Cordless Jigsaw. Before attempting to use this product,

More information

TE 800 TE 800-AVR English

TE 800 TE 800-AVR English TE 800 TE 800-AVR English en 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a is a prerequisite for safe, trouble-free

More information

Handling instructions

Handling instructions Impact Drill Model VTP-16A VTV-16 Handling instructions VTV-16 Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure effi cient, safe operation. It is

More information

SDS Plus Hammer JCB-SDS780

SDS Plus Hammer JCB-SDS780 Safety and operating manual SDS Plus Hammer JCB-SDS780 ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and

More information

Circular Saw 5606B 5806B 5740NB INSTRUCTION MANUAL

Circular Saw 5606B 5806B 5740NB INSTRUCTION MANUAL ENGLISH INSTRUCTION MANUAL Circular Saw 5606B 5806B 5740NB 004075 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH

More information

18 PIECE HOLE SAW SET

18 PIECE HOLE SAW SET 18 PIECE HOLE SAW SET 94665 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

Electric Chainsaw Sharpener

Electric Chainsaw Sharpener FPP CHAINSS Electric Chainsaw Sharpener Instruction Manual For your own safety, please ensure you have read these instructions before use and have fully understood all the safety guidelines. Specifications

More information

Biscuit Joiner 1010W BJK To view the full range visit: Instruction Manual 3 Year Replacement Warranty

Biscuit Joiner 1010W BJK To view the full range visit:  Instruction Manual 3 Year Replacement Warranty Biscuit Joiner 1010W Instruction Manual 3 Year Replacement Warranty BJK-1010 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric

More information

ROTARY HAMMER DRILL MODEL NO: CON1200RD

ROTARY HAMMER DRILL MODEL NO: CON1200RD ROTARY HAMMER DRILL MODEL NO: CON1200RD PART NO: 6479600 OPERATION & MAINTENANCE INSTRUCTIONS LS0117 INTRODUCTION Thank you for purchasing this CLARKE Hammer Drill. The CON1200RD is designed for general

More information

HORIZONTAL/VERTICAL BANDSAW INSTRUCTIONS. Item #20650

HORIZONTAL/VERTICAL BANDSAW INSTRUCTIONS. Item #20650 HORIZONTAL/VERTICAL BANDSAW INSTRUCTIONS Item #20650 The EASTWOOD HORIZONTAL/VERTICAL BANDSAW is a heavy-duty professional quality tool ruggedly designed for many years of reliable service. This versatile

More information

Safety instructions ENGLISH. General power tool safety warnings. (Original instructions)

Safety instructions ENGLISH. General power tool safety warnings. (Original instructions) KD1250 A B C 2 D E F 3 ENGLISH (Original instructions) Intended use Your Black & Decker rotary hammer drill has been designed for drilling in wood, metal, plastics, and masonry as well as for screwdriving

More information

10 Ton Pull Back Ram

10 Ton Pull Back Ram 10 Ton Pull Back Ram Model 97207 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the

More information

6 BENCH GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS

6 BENCH GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS 6 BENCH GRINDER Model 90003 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.

More information

Powercraft P.O. Box CD Zwolle NL PFZ-400R Scroll saw LGA. Nürnberg. Landesgewerbeanstalt Bayern

Powercraft P.O. Box CD Zwolle NL PFZ-400R Scroll saw LGA. Nürnberg. Landesgewerbeanstalt Bayern Powercraft P.O. Box 30159 8003 CD Zwolle NL 0402-19 UK USERS MANUAL Art.nr. SSM6006 PFZ-400R Scroll saw LGA Landesgewerbeanstalt Bayern Nürnberg Fig. A. Fig. D. Fig. B. Fig. E. Fig. C. 2 Powercraft EXPLODED

More information

GUILD 710W Jigsaw PSJ700G. Instruction Manual. UK/Ireland After Sales Support

GUILD 710W Jigsaw PSJ700G. Instruction Manual. UK/Ireland After Sales Support GUILD 710W Jigsaw Instruction Manual PSJ700G After Sales Support UK/Ireland 0333 3201989 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining your

More information

Tube Facing Tool.

Tube Facing Tool. www.swagelok.com Tube Facing Tool This manual contains important information for the safe and effective operation of the Swagelok TF72 series tube facing tool. Users should read and understand its contents

More information

Shaper/Router Table Owner s Manual Model HONESTLY NOW Have you read this OWNER S MANUAL?

Shaper/Router Table Owner s Manual Model HONESTLY NOW Have you read this OWNER S MANUAL? Shaper/Router Table Owner s Manual Model 5000231 HONESTLY NOW Have you read this OWNER S MANUAL? Parlez-vous français? Voir page 8 Habla español? Vea página 14 Safety Assembly Operation Service Parts P.O.

More information

SUCTION FEED SPRAY GUN

SUCTION FEED SPRAY GUN WHAT S IN THE BOX SUCTION FEED SPRAY GUN 130-210 ml/min INSTRUCTION MANUAL SPECIFICATIONS Working Air Pressure: Max Air Pressure: Air Consumption: Nozzle Size: Spray Width: Flow Rate: Feed Type: Paint

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Power Planer DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Power Planer DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Power Planer 00 007 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 00 Planing width 8 mm Planing

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL 600W PRECISION TILE CUTTER Congratulations on your purchase of a power tool from Screwfix Direct Ltd. We want you to continue getting the best performance from it so this handbook

More information

ASSEMBLY AND OPERATING INSTRUCTIONS

ASSEMBLY AND OPERATING INSTRUCTIONS Work Bench 91835 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights reserved.

More information

GRAVITY FEED SPRAY GUN

GRAVITY FEED SPRAY GUN WHAT S IN THE BOX GRAVITY FEED SPRAY GUN 100-190 ml/min INSTRUCTION MANUAL SPECIFICATIONS Working Air Pressure: Max Air Pressure: Air Consumption: Nozzle Size: Spray Width: Flow Rate: Feed Type: Paint

More information

ANGLE GRINDER STAND USER GUIDE AFTER SALES SUPPORT

ANGLE GRINDER STAND USER GUIDE AFTER SALES SUPPORT ANGLE GRINDER STAND USER GUIDE Important: retain for future reference - please read carefully. Now you have purchased a WORKZONE product you can rest assured in the knowledge that as well as your 1 year

More information

COMPLEX GRINDER OF MILL& DRILL

COMPLEX GRINDER OF MILL& DRILL COMPLEX GRINDER OF MILL& DRILL MODEL: MR-F6 OPERATING INSTRUCTION PLEASE REMEMBER 1. When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk

More information

GRAVITY FEED SPRAY GUN

GRAVITY FEED SPRAY GUN WHAT S IN THE BOX GRAVITY FEED SPRAY GUN 160-240ml/min INSTRUCTION MANUAL SPECIFICATIONS Max Air Pressure: Av. Air Consumption: Nozzle Size: Spray Width: Flow Rate: Feed Type: Paint Pot Size: Air Inlet:

More information

10" Wet Tile Cutting Saw

10 Wet Tile Cutting Saw 8035735 10" Wet Tile Cutting Saw Owner s Manual Read and understand all instructions before operation. Keep this manual for future reference pg. 2 SPECIFICATIONS ITEM DESCRIPTION Overall Dimensions (saw

More information

850W HAMMER DRILL MODEL NO: CHD850B

850W HAMMER DRILL MODEL NO: CHD850B 850W HAMMER DRILL MODEL NO: CHD850B PART NO: 6479502 OPERATION & MAINTENANCE INSTRUCTIONS GC0416 INTRODUCTION Thank you for purchasing this CLARKE Hammer Drill. Before attempting to use this product, please

More information

Variable Speed Cast Iron Midi Wood Lathe

Variable Speed Cast Iron Midi Wood Lathe 01936 Variable Speed Cast Iron Midi Wood Lathe Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. 1 Technical Data Input voltage

More information

ELECTRIC TUBE ROLLER

ELECTRIC TUBE ROLLER 41238-0000 ELECTRIC TUBE ROLLER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, 8/20/2007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas C. Wilson,

More information

General Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must

General Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must General Safety All power tools can be dangerous if both general and tool specific safety instructions are not followed carefully. General safety instructions apply to all power tools, both corded and cordless.

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL 7kg SDS PLUS ROTARY HAMMER Congratulations on your purchase of a power tool from Screwfix Direct Ltd. We want you to continue getting the best performance from it so this handbook

More information

Hand Push Cylinder Mower

Hand Push Cylinder Mower Hand Push Cylinder Mower GT5614 OPERATING INSTRUCTIONS Sep 2014 Rev A INTRODUCTION Thank you for purchasing a Hand Push Cylinder Mower. We would you like to be completely satisfied with your new product

More information

154570/220 5/17/02 1:41 PM Page 3. Instruction Manual Variable Speed Orbital Action Jig Saw

154570/220 5/17/02 1:41 PM Page 3. Instruction Manual Variable Speed Orbital Action Jig Saw 154570/220 5/17/02 1:41 PM Page 3 Instruction Manual 3157-220 Variable Speed Orbital Action Jig Saw 154570/220 5/17/02 1:41 PM Page 4 Getting the most out of your tool. Please take time to read this manual

More information

Multi-function bar clamp

Multi-function bar clamp Multi-function bar clamp Model 95957 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

TOUCH-UP SPRAY GUN ml/min INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX ASG-PRO. Spray Gun. Paint Pot.

TOUCH-UP SPRAY GUN ml/min INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX ASG-PRO. Spray Gun. Paint Pot. WHAT S IN THE BOX TOUCH-UP SPRAY GUN 160-240ml/min INSTRUCTION MANUAL SPECIFICATIONS Max Air Pressure: Av. Air Consumption: Nozzle Size: Spray Width: Flow Rate: Feed Type: Paint Pot Size: Air Inlet: Weight

More information

400MM LOGSAW MODEL NO: CLS400 ASSEMBLY & OPERATING INSTRUCTIONS PART NO: GC1015

400MM LOGSAW MODEL NO: CLS400 ASSEMBLY & OPERATING INSTRUCTIONS PART NO: GC1015 400MM LOGSAW MODEL NO: CLS400 PART NO: 3401995 ASSEMBLY & OPERATING INSTRUCTIONS GC1015 INTRODUCTION Thank you for purchasing this CLARKE Log Saw. The CLARKE CLS400 is a single speed circular saw directly

More information

VARIABLE SPEED SCROLL SAW

VARIABLE SPEED SCROLL SAW VARIABLE SPEED SCROLL SAW MODEL NO: CSS400C PART NO: 6462152 OPERATION & MAINTENANCE INSTRUCTIONS LS0911 INTRODUCTION Thank you for purchasing this CLARKE Variable Speed Scroll Saw. Before attempting to

More information

GUILD 1400W 185mm Circular Saw

GUILD 1400W 185mm Circular Saw GUILD 1400W 185mm Circular Saw Instruction Manual PSC185G After Sales Support UK/Ireland 0333 3201989 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining

More information

3 IN 1 HEAVY DUTY TILE CUTTER. Model Visit our website at:

3 IN 1 HEAVY DUTY TILE CUTTER. Model Visit our website at: 3 IN 1 HEAVY DUTY TILE CUTTER Model 41711 ASSEMBLY Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in

More information

MANUAL METAL SHRINKER/STRETCHER

MANUAL METAL SHRINKER/STRETCHER MANUAL METAL SHRINKER/STRETCHER Model 95062 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

PLUNGE PRO TM 600W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PCR-2100 WHAT S IN THE BOX. Mini Plunge Cutter. Blades x 3. Mitre Base.

PLUNGE PRO TM 600W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PCR-2100 WHAT S IN THE BOX. Mini Plunge Cutter. Blades x 3. Mitre Base. WHAT S IN THE BOX PLUNGE PRO TM 600W INSTRUCTION MANUAL SPECIFICATIONS Motor: Rated Speed: Blade Diameter: Max Cut: Weight: ozito.com.au 600W 6000/min 89mm 28.5mm 23mm with base 2kg Mini Plunge Cutter

More information

Electric Router. Please read and fully understand the instructions in this manual before operation and keep this manual safe for future

Electric Router. Please read and fully understand the instructions in this manual before operation and keep this manual safe for future Electric Router FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 0509 500400 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT WITHOUT

More information

PAG-230/2100K Angle Grinder

PAG-230/2100K Angle Grinder Subject to change USERS MANUAL Art.No. AGM6015 10/06 PAG-230/2100K Angle Grinder www.servotool.nl /IRE-0705-15 3 5 6 Exploded view 4 2 8 1 7 Fig.1 12 11 + 4 10 9 8 3 Fig.2 Fig.4 14 13 7 Fig.3 Fig.5 02

More information

WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine!

WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine! ! WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine! 1. This machine is designed and intended for use by properly trained and experienced

More information

OSCILLATING SPINDLE SANDER

OSCILLATING SPINDLE SANDER MC_SpindleSand 55-3510-8 E 7/6/06 11:35 AM Page 1 OSCILLATING SPINDLE SANDER 55-3510-8 Instruction Manual Toll-Free Helpline: 1-800-689-9928 07/06 MC_SpindleSand 55-3510-8 E 7/6/06 11:35 AM Page 2 Table

More information

ELECTRIC CHAINSAW. 1800W 355mm ( 14) INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au ECS-355 WHAT S IN THE BOX. Electric Chainsaw.

ELECTRIC CHAINSAW. 1800W 355mm ( 14) INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au ECS-355 WHAT S IN THE BOX. Electric Chainsaw. WHAT S IN THE BOX ELECTRIC CHAINSAW 1800W 355mm ( 14) INSTRUCTION MANUAL SPECIFICATIONS Power: 1800W Bar Length: 355mm (14 ) Chain Speed: 13.5m/s Chain Pitch: 9.53mm (3/8 ) Sharpening File: 5/32 Oil Feed:

More information

GUILD 1600W 185mm Circular Saw

GUILD 1600W 185mm Circular Saw GUILD 1600W 185mm Circular Saw Instruction Manual PSC185GH After Sales Support UK/Ireland 0333 3201989 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining

More information

OPERATIING INSTRUCTION

OPERATIING INSTRUCTION END MILL GRINDER MODEL: MR-X6 OPERATIING INSTRUCTION PLEASE REMEMBER 1. When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire,

More information

210MM (8 ) MITRE SAW MODEL NO: CMS210S

210MM (8 ) MITRE SAW MODEL NO: CMS210S 210MM (8 ) MITRE SAW MODEL NO: CMS210S PART NO: 6501325 OPERATION & MAINTENANCE INSTRUCTIONS LS0817 - ISS 2 INTRODUCTION Thank you for purchasing this CLARKE 210mm (8 ) Mitre Saw. Before attempting to

More information

4 in 1 Garden Pack 1000 Watt

4 in 1 Garden Pack 1000 Watt 4 in 1 Garden Pack 1000 Watt Instruction Manual 2 Year Replacement Warranty LT4-1000 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in

More information

RIGHT ANGLE DRILL ATTACHMENT WITH 3/8 KEYLESS CHUCK

RIGHT ANGLE DRILL ATTACHMENT WITH 3/8 KEYLESS CHUCK RIGHT ANGLE DRILL ATTACHMENT WITH 3/8 KEYLESS CHUCK 96996 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product

More information

Original Instructions ROUTER TABLE PRA4001

Original Instructions ROUTER TABLE PRA4001 Original Instructions ROUTER TABLE PRA4001 Philips head screw Hex head bolt Allen hex head bolt Coach bolt Nut Flat washer Big flat washer Elastic washers Locking knob A Fig. 1 2 Fig.2 Fig. 3 B C DFig.

More information

SDS4 HAMMER DRILL. Instruction Manual. Read instructions before operating this tool. G

SDS4 HAMMER DRILL. Instruction Manual. Read instructions before operating this tool. G Instruction Manual Read instructions before operating this tool. G10100 FIG 1 FIG 2 EC - DECLARATION OF CONFORMITY EC - DECLARATION OF CONFORMITY We, the importer Evolution Power Tools Ltd. Venture One

More information

D165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL

D165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL D165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL 8-11-11 General Machinery Safety Instructions Machinery House requires you to read this entire Manual before using this

More information

185mm (7-1/4 ) Multipurpose Circular Saw. Instruction Manual. Read instructions before operating this tool.

185mm (7-1/4 ) Multipurpose Circular Saw. Instruction Manual. Read instructions before operating this tool. 185mm (7-1/4 ) Multipurpose Circular Saw Instruction Manual Read instructions before operating this tool. TABLE OF CONTENTS EC - Declaration of Conformity 02 Important Information 03 12 Month Limited Warranty

More information

AST1 CD200 CD501 KR400 KR420 KR450 KR500 KR502 KR510 KR531 KR532

AST1 CD200 CD501 KR400 KR420 KR450 KR500 KR502 KR510 KR531 KR532 ;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;y @ ; y @ ; y yy @ ; y yy AST1 CD200 CD501 KR400 KR420 KR450 KR500 KR502 KR510 KR531 KR532 1 2 Copyright Black & Decker 3 A ;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;@;y

More information

WHETSTONE SHARPENER MODEL NO: CWS200 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: GC0710

WHETSTONE SHARPENER MODEL NO: CWS200 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: GC0710 WHETSTONE SHARPENER MODEL NO: CWS200 PART NO: 6500530 OPERATION & MAINTENANCE INSTRUCTIONS GC0710 INTRODUCTION Thank you for purchasing this CLARKE whetstone sharpener. Before attempting to use this product,

More information

TB & SB Series Drill Presses

TB & SB Series Drill Presses TB & SB Series Drill Presses OWNERS MANUAL BENCH AND FLOOR DRILL PRESS TB-16 Series & SB-16-25-32-Series FOR YOUR OWN SAFETY AND OPTIMUM OPERATION READ INSTRUCTION MANUAL BEFORE OPERATING DRILL PRESS RETAIN

More information