SPECIFICATIONS MODEL NO. PRR-850 KNOW YOUR PRODUCT V ~ 50Hz. Collet Size: 6.35mm (1/4 ) Weight (tool only): Front. Back

Size: px
Start display at page:

Download "SPECIFICATIONS MODEL NO. PRR-850 KNOW YOUR PRODUCT V ~ 50Hz. Collet Size: 6.35mm (1/4 ) Weight (tool only): Front. Back"

Transcription

1

2 SPECIFICATIONS MODEL NO. PRR-850 Motor: 850W Input: V ~ 50Hz No load speed: 11,500-32,000 /min Collet Size: 6.35mm (1/4 ) Weight (tool only): 2.93kgs KNOW YOUR PRODUCT Front Back Turret Depth Stop 2. Depth Rod Adjustment Knob 3. Depth Rod 4. Handles 5. Accessible Brushes 6. Variable Speed Dial 7. Lock On Slide Switch 8. Spindle Lock Lever 9. Collet Nut 10. Guide Fence Locking Knob 11. Plunge Lock Lever 12. Router Fixing Nut 13. Anti Scratch Base 14. Spanner 15. Dust Extraction Adaptor 16. Dust Extraction Adaptor Screws 17. Guide Fence Rods 18. Guide Fence 19. Allen Key 20. Phillip Head Screws 21. Spring 22. Collet 23. Template Guide

3 TABLE OF CONTENTS SPECIFICATIONS. Page 2 TABLE OF CONTENTS Page 3 INTRODUCTION.. Page 4 GENERAL SAFETY INSTRUCTIONS.. Page 4 GENERAL SAFETY RULES.. Page 5 OPERATION Page 8 MAINTENANCE Page 13 TROUBLE SHOOTING Page 14 SPARE PARTS Page 14 DESCRIPTION OF SYMBOLS. Page 15 CONTENTS Page 15 WARRANTY Page 16 3

4 INTRODUCTION Congratulations on purchasing an Ozito Plunge Router. We aim to provide quality tools at an affordable price. We hope you will enjoy using this tool for many years. Your Plunge Router PRR-850 has been designed for routing wood and wood products and is intended for DIY use only.! ELECTRICAL SAFETY! WARNING! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. Read the whole manual carefully and make sure you know how to switch the tool off, in an emergency, before operating the tool. Save these instructions and other documents supplied with this machine for future reference. This tool is double insulated in accordance with AS/NZS 60745; therefore no earth wire is required. If the supply cord is damaged, it must be replaced by a qualified electrician or a power tool repairer in order to avoid a hazard. Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. Using an Extension Lead Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. It is recommended that the extension lead is a maximum of 25m in length. Do Not use multiple extension leads. 4

5 ! GENERAL SAFETY RULES! WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Save these instructions 1) Work area a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. 5

6 ! GENERAL SAFETY RULES (cont.) e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power supply and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. b) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 6

7 ADDITIONAL SAFETY INSTRUCTIONS FOR ROUTERS This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Recommendations for the use of a residual current device with a rated residual current of 30mA or less. Using an Extension Lead Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. It is recommended that the extension lead is a maximum of 25m in length. Do Not use multiple extension leads. Wear safety glasses or goggles when operating this tool. Only use router bits with a shank diameter equal to the size of the collet installed in the tool. Only use router bits suitable for the no-load speed of the tool. Do not use the tool in an inverted position. Do not attempt to use the tool in a stationary mode. Take special care when routing MDF or surfaces coated with lead-based paint: Wear a dust mask specifically designed for protection against lead paint dust and fumes and ensure that persons within or entering the work area are also protected. Do not let children or pregnant women enter the work area. Do not eat, drink or smoke in the work area. Dispose of dust particles and any other debris safely. Draw attention to the necessity for using bits of the correct shank diameter suitable for the speed of the tool. 7

8 OPERATION! WARNING! Before attempting any of the following operations, make sure that the tool is switched off and unplugged and that the spindle has stopped. Installing the handles 1. Insert the Phillip heads screws/washer provided through the hole in the handle (4). 2. Align the handle (4) with the square cut fixing on the left and right sides of the Router (Fig. 1). 3. Tighten the screws clockwise with a Phillips head screwdriver (Fig. 2). 4. Using the cover buttons provided fix into the holes to cover the screw (Fig. 3). Fig. 1 Fig. 2 Fig. 3 Fitting a Router Bit Caution: Please DEPRESS spindle lock lever. Pulling the spindle lock lever may break the lever. Note: When changing accessories on the router it is advisable to lay the router on a flat surface. 1. Depress the spindle lock lever (8) and use the spanner (14) provided to loosen the collet nut (9) in an anti clockwise direction. Keep the spring (21) and collet in the spindle (Fig. 4). Fig Insert the shank of the router bit into the collet (22). Ensuring the shaft of the router bit is inserted all the way into the collet. Raising the router bit approximately 2mm (Fig. 5). 3. Fasten the collet nut (9) using the spindle lock lever (8) and spanner (14). Depress the spindle lock lever (8) and tighten the collet nut (9) with the spanner in a clockwise direction. This will secure the collet (22) and router bit. Caution: Do not over tighten. Ensure you remove the spanner then plug the tool in and turn it on. Check for any undue vibration or wobbling which may indicate the bit is damaged or not installed correctly. Fig. 5 8

9 OPERATION (cont.) Fitting the Straight Guide Fence Remove the two bolts from the guide fence rods (17) using the allen key (19) provided in a anti clockwise direction. Using the allen key (19) tigthen the guide fence rods (17) onto the guide fence (18) in a clockwise direction (Fig. 6). Fig. 6 Fitting the Dust Extraction Adapator The dust extraction adaptor allows you to connect a vacuum cleaner or dust extractor to the tool. 1. Depress the spindle lock lever (8) and then loosen the collet nut (9) in a clockwise direction with the spanner provided. 2. Remove the collet nut (9), spring (21) and router bit collet (22) from the router. 3. Loosen the router fixing nut (12) in an anti-clockwise direction with the spanner (14) provided (Fig. 7). Fig Place your hand on the upper body of the router assembly and separate the router body from the base (Fig. 8). Fig. 8 Fig Remove the 2 parallel guide fence locking knobs (10) from the rear of the router. 6. Turn the router base upside down and hold the dust extractor adaptor (15) in place (Fig. 9). 7. Fix the dust extractor adaptor (15) in position with the two Phillips head screws (20). Use a Phillips head screwdriver and rotate the fixing screws in a clockwise direction (Fig. 10). To reassemble the router into the router base refer to Fitting the Fig. 10 Fig. 11 Dust Extraction Adaptor refer to the 1 4 operational instructions in reverse order (Page 9). Insert the required router bit and tighten the collet nut refer to picture Fig.11. Using the parallel guide The guide fence (18) is an effective aid to cutting in a straight line when chamfering or grooving. 1. Loosen the guide fence (18) locking knobs (10) by rotating them anti-clockwise. 2. Feed the two guide fence rods (17) through the holes in the router base on the right hand side of the router feed direction. This will assist in keeping the guide flush with the side of the work piece. 9

10 OPERATION (cont.) 3. Adjust the distance between the router bit and guide fence (18) by moving the guide to the correct distance from the router bit and the cut you are making. 4. Tighten the guide fence (18) locking knob (10) by rotating clockwise (Fig. 12). Fig. 12 Note: If the distance between the side of the work piece and the cutting position is too wide, or the side of the work piece is not straight firmly clamp a straight board to the work piece and use this as a guide against the router base. Warning! Ensure the router fixing nut (12) is properly tightened and motor is secured within the base. Failure to do so could cause material damage and bodily harm if the motor comes out of the base while in operation. Fitting the Template Guide Fit the template guide (23) to the bottom of the router so that the raised side will be facing the bottom (work piece side) (Fig. 13). Feed the screws supplied through the template guide (23) and base of the router towards the motor and secure with the 2 screws with two nuts provided. Plunge Lock Lever The plunge lock lever (11) must first be pushed up in order to then change the position of plunge up or down. Once the plunge depth (11) is set in the required position press the lever down to lock the plunge depth in place (Fig. 14). The plunge lock lever (11) itself is adjustable. To place the lever in a position with which you are more comfortable, remove the screw, pull the lever out and then replace it in the preferred position. Adjust and retighten with the screw. Setting the Speed The router is provided with variable speed control (6) to greatly increase the versatility of the tool. This can be used to adjust the rotational speed of the bit to its size and the material being worked on. The control is located on the top face of the machine (Fig. 15). Use higher speeds for small diameter router bits and lower speed for larger diameter router bits. Fig. 13 Fig. 14 Fig

11 OPERATION (cont.) Using the Batten as a Guide When it is not possible to use the guide fence (18) for example when routing grooves in the back panel of a bookcase to support shelves, proceed as follows. Place a batten onto the workpiece. Move the batten until it is in the correct position to guide the tool. Securely clamp the batten to the work piece. Using the Template Guide The template guide (23) can be used to make a cut-out shape from a template, for instance a letter. You will need to purchase or make a template. Secure the template guide (23) over the work piece with double sided tape or secure with G clamps. The router bit must extend below the flange of the template guide to cut the work piece on the shape of the template. Refer to Woodworking Forums/Magazines for assistance in creating your templates and guides. Switching On and Off CAUTION: Before plugging in the tool always check that the trigger switch engages and disengages properly. To turn the Router on. 1. Push the ON/OFF slide switch (7) down to start the tool. 2. To turn off the router push the rear of the switch and it will return to the off position. Note: The switch will automatically lock on allowing you to remove your fingers while operating the router. WARNING! Let the tool work at its own pace.! Do not overload. Fig Carefully guide the power cord in order to avoid accidentally cutting it. Adjusting the Depth of Cut The depth of cut is the distance X between the depth rod (3) and the 3 tier turret depth stops (1) (Fig. 17). The depth of cut can be set in two different ways as described below. 1. Fit the router bit as previously described. 2. Loosen the depth rod (3) adjustment knob. 3. Pull the plunge lock lever (11) down. Plunge the router down until the router bit touches the work piece. Fig Release the plunge lock lever (11), locking the router down. 5. Pull the depth rod (3) up. 6. Place a piece of wood with a thickness equal to the desired depth of cut between the 3 tier turret depth rod (1). 11

12 OPERATION (cont.) 7. Tighten the depth rod adjustment knob (2). 8. Remove the piece of wood. 9. Pull the plunge lock lever (11) down and let the router return to its original position. Release the plunge lock lever. 10. After switching the router on, plunge it down and make the desired cut. 11. Fit the router bit as previously described. 12. Loosen the depth rod adjustment knob (2). 13. Pull the plunge lock lever down (11). 14. Plunge the router down until the router bit touches the work piece. 15. Release the plunge lock lever, locking the router down. Adjusting the Depth of Cut Using the Scale 1. Release the plunge lock lever (11), locking the router down. 2. Read the starting position from the scale. 3. Add the desired depth of cut to the starting position. 4. Move the depth rod (3) to the calculated position on the scale. 5. Tighten the depth rod adjustment knob (2). 6. Pull the plunge lock lever (11) down and let the router return to it s original position. 7. After switching the router on, plunge it down and make the desired cut. Making a Cut Your router can be used to make specialty cuts and shapes in the surface and on the edge of wood. It accepts a wide range of bits that are each designed for a specific cut or shape. 1. Make all your adjustments as described in the previous sections. 2. Insert and secure your router bit. 3. Adjust the depth of cut as required for the application. 4. Ensure that the materials you are working are fastened to the workbench or secured correctly. 5. Place the base plate on the work piece ensuring that the bit is not in contact with the material to be cut. 6. Connect the router to the power supply. 7. Turn the router on. Ensure you have a firm grip on both handles. Wait for the bit to come to full speed. 8. Lower the router body and lock it in position at the desired depth of cut. 9. Follow the guide below to assist you when routing your workpiece. Direction of the router travel 12 When routering the outside of your workpiece When routering the inside of your workpiece

13 OPERATION (cont.) 10. Keep the cutting pressure constant, taking care not to overload the router causing the motor to slow excessively. 11. On very hard woods or problem materials it may be necessary to make more than one pass at progressive cutting depths until the desired depth of cut is achieved. 12. To turn the router off by releasing the trigger on/off switch or press and release the trigger switch if in the lock-on position. Warning! When using this router to cut flat panels such as kitchen work surfaces, before joining please ensure that you use an appropriate jig together with the correct guide bush. DO NOT use the curved part of the router base against a simple guide piece. Hints for Optimum Use When working on outside edges, move the tool counter clockwise. When working on inside edges, move the tool clockwise. You can use the tool without a guide. This is useful for signwriting and creative work. Only make shallow cuts. Details of the type of cutters for which the tool is designed MAINTENANCE Your Ozito Router has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.! WARNING! Before performing any maintenance, switch off and unplug the tool. Regularly clean the ventilation slots on your router using a soft brush or dry cloth. After each use, blow air through the router to ensure it is free from all dust particles that may build up. Build up of dust particles may cause the tool to overheat and fail. Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner. 13

14 MAINTENANCE (cont.) When the carbon brushes wear out the tool will spark and/or stop. This situation can damage your tool so to avoid this happening the brushes should be replaced prior to wearing out fully. Brushes will wear out after many uses but before they do take the tool to an electrician or a power tool repairer for quick and low cost replacement. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool. TROUBLE SHOOTING SYMPTOM POSSIBLE CAUSE REMEDY Router will not operate. Router runs slowly. Excessive vibration. Heavy sparking occurs inside motor housing. No supply of power. Blunt or damaged router bits. Variable speed set low. Motor is overloaded. Bent router bit shaft. Brushes not moving freely. Check that power is available at source. Re-sharpen or replace router bits. Increase variable speed setting. Reduce excessive load or force on router. Replace router bit. Disconnect power, remove brushes, clean or replace. SPARE PARTS Limited spare parts are available subject to availability. Please contact your local Bunnings Special Orders Desk to order the required spare parts. Most common spare parts listed below Spare Part Part No. Collet Nut SPPRR Collet SPPRR Collet Spring SPPRR Carbon Brushes (set) SPPRR Brush Holders SPPRR Spare Part Variable Speed Switch Locking Lever Depth Ruler Timing Switch Part No. SPPRR SPPRR SPPRR SPPRR

15 DESCRIPTION OF SYMBOLS V Volts Hz Hertz ~ Alternating current W Watts /min Revolutions or reciprocation per minute Double insulated ø Diameter no No load speed Warning Regulator compliance mark Read operation manual CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice. Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. CONTENTS 1 x Plunge Router (PRR-850) 1 x Collet 6.35mm (1/4 ) 1 x Dust Extraction Adaptor 1 x Spanner 1 x Alley Key 1 x Guide Fence 1 x Template Guide 1 x Depth Rod 2 x Guide Fence Rods 1 x Instruction Manual OZITO INDUSTRIES PTY LTD AUSTRALIA (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: Facsimile: Website: enquiries@ozito.com.au 15

16 WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: `Australia New Zealand TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE. The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting our customer service helpline above. 3 YEAR REPLACEMENT WARRANTY Your product is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty excludes consumable parts, for example: collet, dust extraction adaptor, spanner, alley key. WARNING The following actions will result in the warranty being void. Professional, Industrial or high frequency use. If the tool has been operated on a supply voltage other than that specified on the tool. If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations. Failure to perform maintenance as set out within the instruction manual. If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175 OW5

SPECIFICATIONS MODEL NO. PRR-850

SPECIFICATIONS MODEL NO. PRR-850 SPECIFICATIONS MODEL NO. PRR-850 Motor: 850W Input: 230-240V ~ 50Hz No load speed: 11,500-32,000/min -1 Collet Size: 6.35mm (1/4 ) Weight (tool only): 2.93kgs Features: Know Your Product Variable Speed

More information

Tile Cutting Saw 600W. OZTCS600WA. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

Tile Cutting Saw 600W.  OZTCS600WA. To view the full range visit: Instruction Manual 3 Year Replacement Warranty Tile Cutting Saw 600W Instruction Manual 3 Year Replacement Warranty OZTCS600WA! WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric

More information

ROUTER 850W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au ROU-5000 WHAT S IN THE BOX. Router. Guide Fence. Dust Extraction Adaptor.

ROUTER 850W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au ROU-5000 WHAT S IN THE BOX. Router. Guide Fence. Dust Extraction Adaptor. WHAT S IN THE BOX ROUTER 850W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Input: 850W No Load Speed: 11,500-32,000/min Collet Size: 6.35mm (1/4 ) Plunge Depth: 30mm Turret Stops: 3 Weight:

More information

MULTI-PURPOSE SAW MODEL NO. OZMPS500A OPERATING INSTRUCTIONS

MULTI-PURPOSE SAW MODEL NO. OZMPS500A OPERATING INSTRUCTIONS MULTI-PURPOSE SAW 500watt MODEL NO. OZMPS500A OPERATING INSTRUCTIONS To view our entire range visit www.ozito.com.au SPECIFICATIONS - MODEL NO. OZMPS500A Motor: Input: No load speed: Length of stroke:

More information

WHAT S IN THE BOX DRILL BIT SHARPENER. Drill Bit Sharpener 95W INSTRUCTION MANUAL SPECIFICATIONS. Input Power: (1/8-15/32 ) ozito.com.

WHAT S IN THE BOX DRILL BIT SHARPENER. Drill Bit Sharpener 95W INSTRUCTION MANUAL SPECIFICATIONS. Input Power: (1/8-15/32 ) ozito.com. WHAT S IN THE BOX DRILL BIT SHARPENER 95W INSTRUCTION MANUAL SPECIFICATIONS Voltage: Input Power: No Load Speed: Working Capacity: Weight: ozito.com.au 230-240V ~ 50Hz 95W 1350/min 3mm-12mm (1/8-15/32

More information

LAMINATE TRIMMER 350W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LTM-3000 WHAT S IN THE BOX. Laminate Trimmer. Trimming Guide.

LAMINATE TRIMMER 350W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LTM-3000 WHAT S IN THE BOX. Laminate Trimmer. Trimming Guide. WHAT S IN THE BOX LAMINATE TRIMMER 350W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Power: 350W No Load Speed: 30,000/min Collet Size: 6.35mm (1/4 ) Weight: 1.7kg ozito.com.au Laminate Trimmer

More information

PALM PLANER OPERATING INSTRUCTIONS. To view our full range visit MODEL NO. OZPPL280WA

PALM PLANER OPERATING INSTRUCTIONS. To view our full range visit MODEL NO. OZPPL280WA PALM PLANER 280W MODEL NO. OZPPL280WA OPERATING INSTRUCTIONS To view our full range visit w w w. o z i t o. c o m. a u SPECIFICATIONS MODEL NO. OZPPL280WA Motor size: Input: No load speed: Planing width:

More information

MULTI FUNCTION SHARPENER

MULTI FUNCTION SHARPENER WHAT S IN THE BOX MULTI FUNCTION SHARPENER 65W INSTRUCTION MANUAL SPECIFICATIONS Motor: 65W No Load Speed: 6,700/min Wheel Diameter: 49mm (2 ) Sharpening Capacity Drill bit: 3-10mm Blade: 6-51mm Weight:

More information

Hammer Drill 1050W OZHD1050WA. To view the entire range visit: Operation Manual 3 Year Replacement Warranty

Hammer Drill 1050W OZHD1050WA. To view the entire range visit:   Operation Manual 3 Year Replacement Warranty Hammer Drill 1050W Operation Manual 3 Year Replacement Warranty OZHD1050WA 0109 To view the entire range visit: www.ozito.com.au SPECIFICATIONS MODEL NO. OZHD1050WA Motor size: Input: Chuck size: No load

More information

DRILL BIT SHARPENER 95W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au DBS-095 WHAT S IN THE BOX

DRILL BIT SHARPENER 95W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au DBS-095 WHAT S IN THE BOX WHAT S IN THE BOX DRILL BIT SHARPENER 95W INSTRUCTION MANUAL SPECIFICATIONS Voltage: Input Power: No Load Speed: Working Capacity: Weight: ozito.com.au 220-240V ~ 50Hz 95W 1,350/min 3mm-12mm (1/8-15/32

More information

Hammer Drill 1050W OZHD1050WA. To view the entire range visit: Operation Manual 3 Year Replacement Warranty

Hammer Drill 1050W OZHD1050WA. To view the entire range visit:   Operation Manual 3 Year Replacement Warranty Hammer Drill 1050W Operation Manual 3 Year Replacement Warranty OZHD1050WA 0112 To view the entire range visit: www.ozito.com.au SPECIFICATIONS MODEL NO. OZHD1050WA Motor size: Input: Chuck size: No load

More information

PLANER 750W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PLR-5000 WHAT S IN THE BOX. Planer. Parallel Guide. Rebate Guide.

PLANER 750W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PLR-5000 WHAT S IN THE BOX. Planer. Parallel Guide. Rebate Guide. WHAT S IN THE BOX PLANER 750W INSTRUCTION MANUAL SPECIFICATIONS Voltage: Input Power: No Load Speed: Planing Width: Blade Type: Planing Depth: Rebate Depth: Weight: ozito.com.au 230-240V ~ 50Hz 750W 14,000/min

More information

Impact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Impact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Impact Wrench MODEL TW000 00605 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

ELECTRIC STAPLE NAIL GUN

ELECTRIC STAPLE NAIL GUN WHAT S IN THE BOX ELECTRIC STAPLE NAIL GUN 8MM - 14MM INSTRUCTION MANUAL SPECIFICATIONS Input: 230-240V ~ 50Hz Power: 45W Impact Rate: 30/min Staple Size: 8-14mm, Type 50 Nail Size: 15mm, C1 Brad Magazine

More information

Chainsaw Chain Sharpener

Chainsaw Chain Sharpener WHAT S IN THE BOX Chainsaw Chain Sharpener 85W INSTRUCTION MANUAL SPECIFICATIONS Motor: 85W Input: 230V-240V ~ 50Hz No load speed: 4,800/min Table/vice angles: 0 35 left & right Sharpening Wheel: Ø108

More information

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880

More information

MULTI FUNCTION SHARPENER

MULTI FUNCTION SHARPENER WHAT S IN THE BOX MULTI FUNCTION SHARPENER 65W INSTRUCTION MANUAL SPECIFICATIONS Motor: 65W No Load Speed: 6,7/min Wheel Diameter: 49mm (2 ) Sharpening Capacity Drill bit: 3-1mm Blade: 6-51mm Weight: 1.32kg

More information

Operating Manual 6 Industrial Bench Grinder ATBG280/

Operating Manual 6 Industrial Bench Grinder ATBG280/ Operating Manual 6 Industrial Bench Grinder ATBG280/6 804531 40 Year Australian Heritage The reputable name in bench grinders for 40 years Protect yourself and others by observing all safety information,

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill DS402 05402 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DS402 Capacities Steel 3 mm Wood

More information

Drill INSTRUCTION MANUAL. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE 1 REFERENCE.

Drill INSTRUCTION MANUAL. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE 1 REFERENCE. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 6411 6412 6413 007894 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE

More information

HAMMER DRILL 710W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au HDR-710 WHAT S IN THE BOX

HAMMER DRILL 710W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au HDR-710 WHAT S IN THE BOX WHAT S IN THE BOX HAMMER DRILL 710W INSTRUCTION MANUAL SPECIFICATIONS Motor: Input: Chuck Size: No Load Speed: Impact Rate: Drilling Capacities: Weight: ozito.com.au 710W 230-240V ~ 50Hz 13mm ( 1 / 2 )

More information

KR703-XE KR704-XE KR705-XE KR753-XE KR754-XE KR755-XE Australia New Zealand

KR703-XE KR704-XE KR705-XE KR753-XE KR754-XE KR755-XE Australia New Zealand 6 5 4 www.blackanddecker.com.au 3 7 2 1 8 KR703-XE KR704-XE KR705-XE KR753-XE KR754-XE KR755-XE Australia New Zealand 7 8 A 12 13 10 9 10 B C 11 7 8 D E 2 Intended use Your Black & Decker hammer drill

More information

Planer 82mm Watt

Planer 82mm Watt Planer 82mm - 650 Watt Operation Manual 3 Year Replacement Warranty OZPL650A To view the full range visit: www.ozito.com.au 0209 SPECIFICATIONS MODEL NO. OZPL650A Motor size: Input: No load speed: Planing

More information

Spade Handlle Drill Watt. OZSHD1050WA. To view the full range visit: Operation Manual 3 Year Replacement Warranty

Spade Handlle Drill Watt.   OZSHD1050WA. To view the full range visit: Operation Manual 3 Year Replacement Warranty Spade Handlle Drill 1050 Watt Operation Manual 3 Year Replacement Warranty OZSHD1050WA 0509 To view the full range visit: www.ozito.com.au SPECIFICATIONS - MODEL NO. OZSHD1050WA Motor: Input: No load speed:

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 64 642 643 007894 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 64 642 643 Capacities Steel

More information

Impact Wrench MODEL 6905B MODEL 6906

Impact Wrench MODEL 6905B MODEL 6906 ENGLISH Impact Wrench MODEL 6905B MODEL 6906 005305 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

Spade Handle Drill 1050W. OZSHD1050WA. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

Spade Handle Drill 1050W.   OZSHD1050WA. To view the full range visit: Instruction Manual 3 Year Replacement Warranty Spade Handle Drill 1050W Instruction Manual 3 Year Replacement Warranty OZSHD1050WA WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MT600 MT601 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MT600 MT601 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill MT600 MT60 003635 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MT600 MT60 Capacities Steel

More information

STAPLE NAIL GUN. 12V Lithium Ion WARRANTY INSTRUCTION MANUAL SPECIFICATIONS ZLSGS-012 WHAT S IN THE BOX

STAPLE NAIL GUN. 12V Lithium Ion WARRANTY INSTRUCTION MANUAL SPECIFICATIONS ZLSGS-012 WHAT S IN THE BOX WHAT S IN THE BOX STAPLE NAIL GUN 12V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Voltage: 12V Impact Rate: 30/min Max. Capacity: 90 x Staples 90 x Nails Staple Size: T50 18 gauge 8-16mm Nail Size: C1

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Shear Wrench 6922NB DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Shear Wrench 6922NB DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Shear Wrench 69NB 00498 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 69NB Bolt size M6, M0, M

More information

Circular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Circular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Circular Saw MODEL MT58 005337 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

Impact Wrench. 19 mm (3/4 ) MODEL 6906

Impact Wrench. 19 mm (3/4 ) MODEL 6906 Impact Wrench 9 mm (3/4 ) MODEL 6906 002290 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

TILE CUTTING SAW. 500W 115mm INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au TCS-115 WHAT S IN THE BOX. Tile Cutting Saw.

TILE CUTTING SAW. 500W 115mm INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au TCS-115 WHAT S IN THE BOX. Tile Cutting Saw. WHAT S IN THE BOX TILE CUTTING SAW 500W 115mm INSTRUCTION MANUAL SPECIFICATIONS Motor: 500W Input: 230 240V~50Hz No Load Speed: 5,200min 1 Blade: Ø115 x Ø22.2mm Max. Depth Of Cut: 24mm Table Size: 330

More information

SAFETY AND OPERATING MANUAL. Hedge Trimmer WG205E WG206E WG207E WG208E

SAFETY AND OPERATING MANUAL. Hedge Trimmer WG205E WG206E WG207E WG208E SAFETY AND OPERATING MANUAL 2 PRODUCT SAFETY GENERAL Power Tool Safety Warnings WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or

More information

Nibbler MODEL JN1601. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Nibbler MODEL JN1601. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Nibbler MODEL JN60 00477 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS

More information

RECIPROCATING SAW 920W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au RSW-5200 WHAT S IN THE BOX. Reciprocating Saw. Timber Cutting Blades x 2

RECIPROCATING SAW 920W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au RSW-5200 WHAT S IN THE BOX. Reciprocating Saw. Timber Cutting Blades x 2 WHAT S IN THE BOX RECIPROCATING SAW 920W INSTRUCTION MANUAL SPECIFICATIONS Motor: No Load Speed: Stroke Length: Blade Fitment: Cutting Capacities: Weight: ozito.com.au 920W 800-3000spm 24mm Tool-free Timber

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Curved Planer 1002BA DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Curved Planer 1002BA DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Curved Planer 00BA 0059 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 00BA Planing width 0 mm Planing

More information

RECIPROCATING SAW. 12V Lithium Ion WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au ZLRSS-012 WHAT S IN THE BOX

RECIPROCATING SAW. 12V Lithium Ion WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au ZLRSS-012 WHAT S IN THE BOX WHAT S IN THE BOX RECIPROCATING SAW 12V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Input Voltage: No Load Speed: Stroke Length: Cutting Capacities: Tool Weight: ozito.com.au 12V 0-2,800spm 13.78mm 50mm

More information

Handling instructions

Handling instructions Hand Shear Model CE 16SA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL Impact drill WX317 WX318 1 3 2 8 7 6 5 4 A1 A2 B C1 2 1 3 3 1 D C2 5 4 E F 2 E F 1 G 4 2 H 1. Keyless Chuck 2. Depth gauge 3. Drill/hammer drill function selector 4. Switch

More information

SPECIFICATIONS - MODEL NO. MFR-250

SPECIFICATIONS - MODEL NO. MFR-250 MFR-250 manual.qxd 1/12/11 11:24 AM Page 2 SPECIFICATIONS - MODEL NO. MFR-250 Motor size: 250 Watt Input: 230-240V ~ 50Hz No load speed: 15,000-21,000/min Max. stroke length: 3.8mm Orbit angle: 3.2 Sanding

More information

Handling instructions

Handling instructions Router Model M 2SC Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these

More information

Angle Grinder 230mm Watt

Angle Grinder 230mm Watt AGG-051K manual.qxd 9/24/09 9:48 AM Page 1 Angle Grinder 230mm - 2200 Watt Operation Manual 3 Year Replacement Warranty AGG-051K To view the full range visit: www.ozito.com.au 0909 AGG-051K manual.qxd

More information

ROTARY HAMMER OWNER'S MANUAL

ROTARY HAMMER OWNER'S MANUAL ROTARY HAMMER OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

18V CORDLESS STAPLER/NAILER

18V CORDLESS STAPLER/NAILER 18V CORDLESS STAPLER/NAILER MODEL NO: CONSN18LIC PART NO: 6487058 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0717 ISS2 2 INTRODUCTION Thank you for purchasing this CLARKE product. Before

More information

Finger Jointer. Operating and Safety Instructions FJA300

Finger Jointer.  Operating and Safety Instructions FJA300 Finger Jointer FJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation

More information

MINI RECIPROCATING SAW MODEL NO: CRS350M

MINI RECIPROCATING SAW MODEL NO: CRS350M CRS350M - Mini Reciprocating saw.fm Page 1 Thursday, November 22, 2012 9:41 AM MINI RECIPROCATING SAW MODEL NO: CRS350M PART NO: 6462550 OPERATION & MAINTENANCE INSTRUCTIONS LS1112 CRS350M - Mini Reciprocating

More information

SAFETY AND OPERATING MANUAL. 750W/13mm IMPACT DRILL JM750ID

SAFETY AND OPERATING MANUAL. 750W/13mm IMPACT DRILL JM750ID SAFETY AND OPERATING MANUAL 750W/13mm IMPACT DRILL JM750ID GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may

More information

Jigsaw Kit. Operating and Safety Instructions AJA300

Jigsaw Kit.  Operating and Safety Instructions AJA300 Jigsaw Kit AJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation of this

More information

Handling instructions

Handling instructions Nibbler Model CN 16SA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these

More information

SPECIFICATIONS - MODEL NO. MSS-003 KNOW YOUR PRODUCT. Width (not extended): Weight capacity: Weight (tool only):

SPECIFICATIONS - MODEL NO. MSS-003 KNOW YOUR PRODUCT. Width (not extended): Weight capacity: Weight (tool only): SPECIFICATIONS - MODEL NO. MSS-003 Width (extended): Width (not extended): Height: Roller size: Weight capacity: Weight (tool only): 2050mm 1055mm 820mm 230mm 150kg 13.4kgs KNOW YOUR PRODUCT 1 2 4 3 4

More information

SPECIFICATIONS MODEL NO. DP-350 KNOW YOUR PRODUCT. Motor size: V ~ 50Hz. Spindle travel: Spindle shaft to column distance: Column height:

SPECIFICATIONS MODEL NO. DP-350 KNOW YOUR PRODUCT. Motor size: V ~ 50Hz. Spindle travel: Spindle shaft to column distance: Column height: SPECIFICATIONS MODEL NO. DP-350 Motor size: Input: No load speed: Chuck: Spindle travel: Spindle shaft to column distance: Column height: Protection class: Weight: 350W 230-240V ~ 50Hz 580, 850, 1220,

More information

2-Speed Hammer Drill HP2000 HP2020

2-Speed Hammer Drill HP2000 HP2020 2-Speed Hammer Drill HP2000 HP2020 SPECIFICATIONS Model HP2000 HP2020 Speed High Low High Low Capacities Concrete 20 mm 20 mm Steel 6.5 mm 13 mm 6.5 mm 13 mm No load speed (min 1 ) 0 2,300 0 900 2,300

More information

High Speed Drill MODEL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

High Speed Drill MODEL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH High Speed Drill MODEL 6501 003002 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

SPECIFICATIONS - MODEL NO. LTR-301

SPECIFICATIONS - MODEL NO. LTR-301 SPECIFICATIONS - MODEL NO. LTR-301 Motor: 500W Input: 230-240V ~ 50Hz No load speed: 11,000/min Cutting diameter: 300mm Line diameter: 1.5mm x 4.5m Feed type: Semi-Automatic Weight (tool only): 2.7kg KNOW

More information

OPERATION & MAINTENANCE

OPERATION & MAINTENANCE DOUBLE HEADED METAL NIBBLER MODEL NO: DHC-2 PART NO: 6500233 OPERATION & MAINTENANCE INSTRUCTIONS LS0609 INTRODUCTION Thank you for purchasing this CLARKE Double Headed Metal Nibbler. Before attempting

More information

Hedge Trimmer. 450 Watt. HT-501. To view the full range visit: Operation Manual 2 Year Replacement Warranty

Hedge Trimmer. 450 Watt.  HT-501. To view the full range visit: Operation Manual 2 Year Replacement Warranty Hedge Trimmer 450 Watt Operation Manual 2 Year Replacement Warranty HT-501 To view the full range visit: www.ozito.com.au 0109 SPECIFICATIONS - MODEL NO. HT-501 Motor size: Input: No load speed: Blade

More information

Auto Feed Screwdriver

Auto Feed Screwdriver ENGLISH Auto Feed Screwdriver MODEL 6833 MODEL 6834 MODEL 6836 002607 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE

More information

SAFETY AND OPERATING MANUAL 135W PALM SANDER JM135PS

SAFETY AND OPERATING MANUAL 135W PALM SANDER JM135PS SAFETY AND OPERATING MANUAL 135W PALM SANDER JM135PS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result

More information

COLD CUT SAW 1280W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au CCS-1200 WHAT S IN THE BOX. Cold Cut Saw. 5mm & 6mm Hex key.

COLD CUT SAW 1280W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au CCS-1200 WHAT S IN THE BOX. Cold Cut Saw. 5mm & 6mm Hex key. WHAT S IN THE BOX COLD CUT SAW 1280W INSTRUCTION MANUAL SPECIFICATIONS Rated Voltage: Rated Power: No Load Speed: Supplied Blade: 230 240V ~ 50Hz 1280W 3800rpm Cutting Blade Max.: Ø185mm (7-1/4 ) Cutting

More information

TABLE SAW. 200mm 800W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au TSB-0808 WHAT S IN THE BOX

TABLE SAW. 200mm 800W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au TSB-0808 WHAT S IN THE BOX WHAT S IN THE BOX TABLE SAW 200mm 800W INSTRUCTION MANUAL SPECIFICATIONS Motor: 800W (S2 10min) Input: 230-240V ~ 50Hz No Load Speed: 2,950/min Blade: Ø200mm x Ø16 x 2.4mm Blade Teeth 24TCT Depth of Cut:

More information

DETAIL SANDER 180W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au DSR-2500 WHAT S IN THE BOX

DETAIL SANDER 180W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au DSR-2500 WHAT S IN THE BOX WHAT S IN THE BOX DETAIL SANDER 180W INSTRUCTION MANUAL SPECIFICATIONS Motor: No Load Speed: Pad Size: Paper Fitment: Power Cord: Weight: ozito.com.au 180W 15,000/min 140x140x80mm Hook & Loop 2m 1.5kg

More information

SPECIFICATIONS - MODEL NO. RHR-850

SPECIFICATIONS - MODEL NO. RHR-850 SPECIFICATIONS - MODEL NO. RHR-850 Motor: Input: No load speed: Impact rate: Impact energy: Accessory fitment: Drilling capacities: Weight (tool only): 850W 230V ~ 50Hz 800 /min 3,000 bpm 3.8 Joule SDS+

More information

Rotary Hammer Drill Kit

Rotary Hammer Drill Kit Rotary Hammer Drill Kit 1500W Operation Manual 1 Year Replacement Warranty OZRH1500WAK CAUTION: Read this operation manual before using this tool. To view the full range visit: www.ozito.com.au 0609 SPECIFICATIONS

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill HP1630 HP1631 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill HP1630 HP1631 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Hammer Drill HP630 HP63 008892 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model HP630 HP63 Concrete

More information

1800W VARIABLE SPEED ROUTER

1800W VARIABLE SPEED ROUTER 1800W VARIABLE SPEED ROUTER MODEL NO: CR3 PART NO: 6462081 OPERATION & MAINTENANCE INSTRUCTIONS LS1111 INTRODUCTION Thank you for purchasing this CLARKE 1800W Variable Speed Router. Before attempting to

More information

Impact Wrench WR 22SA HANDLING INSTRUCTIONS. Read through carefully and understand these instructions before use.

Impact Wrench WR 22SA HANDLING INSTRUCTIONS. Read through carefully and understand these instructions before use. Impact Wrench WR 22SA HANDLING INSTRUCTIONS Read through carefully and understand these instructions before use. 1 1 2 2 3 4 5 3 6 7 8 9 5 3 4 kg-m 80 N m 800 M22 70 (F 10T) 0 C 70 700 60 50 600 500 40

More information

Angle Drill MODEL DA3000R MODEL DA3000V

Angle Drill MODEL DA3000R MODEL DA3000V ENGLISH Angle Drill MODEL DA3000R MODEL DA3000V 003004 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

THICKNESSER OPERATING INSTRUCTIONS. To view our entire range visit MODEL NO. OZT1500WA

THICKNESSER OPERATING INSTRUCTIONS. To view our entire range visit  MODEL NO. OZT1500WA THICKNESSER 1500W MODEL NO. OZT1500WA OPERATING INSTRUCTIONS To view our entire range visit www.ozito.com.au 1208 SPECIFICATIONS - MODEL NO. OZT1500WA Motor: 1500W Input: 240V ~ 50Hz No Load Speed: 9500/min

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Router 3600H. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Router 3600H. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Router 300H 00507 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 300H Collet chuck capacity or /" No load speed (min

More information

COMPOUND MITRE SAW. 210mm (8¼ ) WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au CMS-1621S WHAT S IN THE BOX

COMPOUND MITRE SAW. 210mm (8¼ ) WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au CMS-1621S WHAT S IN THE BOX WHAT S IN THE BOX COMPOUND MITRE SAW 210mm (8¼ ) INSTRUCTION MANUAL SPECIFICATIONS Motor: 1600W (S6 40%), 1400W (S1) No Load Speed: 5,000/min Blade: Ø210mm x Ø16 x 48T Mitre Angle: 0-45 left & right Bevel

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill MHP161 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill MHP161 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Hammer Drill MHP6 0088 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MHP6 Concrete 6 mm Capacities

More information

THIRD SHEET SANDER / 3 SHEET INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX TSS Third Sheet Sander. Dust Bag.

THIRD SHEET SANDER / 3 SHEET INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX TSS Third Sheet Sander. Dust Bag. WHAT S IN THE BOX THIRD SHEET SANDER 1 / 3 SHEET INSTRUCTION MANUAL SPECIFICATIONS Motor: No Load Spead: Pad Size: Weight: ozito.com.au 150W 11,000 opm 1 / 3 Sheet (187x90mm) 1.02kg Third Sheet Sander

More information

Handling instructions

Handling instructions Orbital Sander Model SV 12SG Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended

More information

Drill MODEL 6013B MODEL 6013BR. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Drill MODEL 6013B MODEL 6013BR. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Drill MODEL 6013B MODEL 6013BR 004618 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE

More information

2-Speed Hammer Drill HP2030 HP2031 INSTRUCTION MANUAL

2-Speed Hammer Drill HP2030 HP2031 INSTRUCTION MANUAL ENGLISH (Original instructions) INSTRUCTION MANUAL 2-Speed Hammer Drill HP2030 HP203 002466 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS

More information

4.0MM METAL CUTTING NIBBLER

4.0MM METAL CUTTING NIBBLER 596702 4.0MM METAL CUTTING NIBBLER Read through carefully and understand these instructions before use N3570 SAFETY INSTRUCTIONS PLEASE READ & UNDERSTAND THESE INSTRUCTIONS! STORE THESE INSTRUCTIONS IN

More information

THIRD SHEET SANDER / 3 SHEET WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX TSS-3100

THIRD SHEET SANDER / 3 SHEET WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX TSS-3100 WHAT S IN THE BOX THIRD SHEET SANDER 1 / 3 SHEET INSTRUCTION MANUAL SPECIFICATIONS Motor: No Load Spead: Pad Size: Weight: ozito.com.au 150W 11,000 opm 1 / 3 Sheet (187x90mm) 1.02kg Third Sheet Sander

More information

GENERAL OPERATIONAL PRECAUTIONS

GENERAL OPERATIONAL PRECAUTIONS GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

DRILL PRESS WARRANTY. ozito.com.au INSTRUCTION MANUAL SPECIFICATIONS BDP-500 WHAT S IN THE BOX

DRILL PRESS WARRANTY. ozito.com.au INSTRUCTION MANUAL SPECIFICATIONS BDP-500 WHAT S IN THE BOX WHAT S IN THE BOX DRILL PRESS 500W 9 Speed INSTRUCTION MANUAL SPECIFICATIONS Motor Size: 500W (S2 15min) Input: 230 2V ~ 50Hz No Load Speed: 500-2,500/min Chuck: 16mm Keyed Morse Taper: B16-2MT Spindle

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Straight Shear JS1660 JS1670 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Straight Shear JS1660 JS1670 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Straight Shear JS660 JS670 004666 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model JS660 JS670 Steel

More information

Recipro Saw MODEL JR3000V. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Recipro Saw MODEL JR3000V. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Recipro Saw MODEL JR3000V 00477 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Impact Wrench 6904VH 6905H DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Impact Wrench 6904VH 6905H DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Impact Wrench 6904VH 6905H 005299 DOUBLE INSULATION IMPORTANT: Read Before Using. 1 ENGLISH (Original instructions) SPECIFICATIONS Model 6904VH 6905H

More information

Automatic Screwdriver Model W 4YD. Handling instructions

Automatic Screwdriver Model W 4YD. Handling instructions Automatic Screwdriver Model W 4YD Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended

More information

Uni-Jaws. 860mm Clamping Capacity. UJC-860. To view the full range visit: Instruction Manual 2 Year Replacement Warranty

Uni-Jaws. 860mm Clamping Capacity.   UJC-860. To view the full range visit: Instruction Manual 2 Year Replacement Warranty Uni-Jaws 860mm Clamping Capacity Instruction Manual 2 Year Replacement Warranty UJC-860 CAUTION: Read this instruction manual before using this tool. To view the full range visit: www.ozito.com.au 1113

More information

Handling instructions

Handling instructions Impact Drill Model DV 8V Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that

More information

20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li

20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li 20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li PART NO: 6487020 OPERATION & MAINTENANCE INSTRUCTIONS LS1013 INTRODUCTION Thank you for purchasing this CLARKE 20V Cordless Reciprocating Saw. Before attempting

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL BladeRunner X2 WX572 9 10 8 11 5 7 12 6 20 1 2 4 3 14 13 15 A2 A1 17 18 B2 B1 1 2 1 2 19 B3 3 4 2 C 1 D1 D1 C 2 1 E1 D2 1 2 E2 1 2 F G1 G1 F OFF ON G2 G3 H1 H2 I1 I2 I1 I2 J

More information

BENCH GRINDER & FLEXIBLE DRIVE

BENCH GRINDER & FLEXIBLE DRIVE WHAT S IN THE BOX BENCH GRINDER & FLEXIBLE DRIVE 120W 75mm INSTRUCTION MANUAL SPECIFICATIONS Voltage: Input Power: No Load Speed: Wheel: Wheel Bore: Wheel Max. Speed: Weight: 230-240V ~ 50Hz 120W 0 9,900/min

More information

INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER

INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER Part No.: SW1250 PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE SPECIFICATIONS Part No.: SW1250 Input Voltage: 240V Frequency: 50Hz Rated

More information

GENERAL OPERATIONAL PRECAUTIONS

GENERAL OPERATIONAL PRECAUTIONS GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

45º 30º 25º 15º 20º 22.5º 0º 5º 10º WARRANTY WARNING

45º 30º 25º 15º 20º 22.5º 0º 5º 10º WARRANTY WARNING 0º 5º 10º 22.5º WHAT S IN THE BOX TABLE SAW 2000W 250mm INSTRUCTION MANUAL 15º 20º 25º 30º 45º Sliding Mitre Gauge Rip Fence Base Frame Legs x 4, Cross Struts x 4, Feet x 4 SPECIFICATIONS Motor: 2000W

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Finishing Sander BO4553 BO4561 BO4563 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Finishing Sander BO4553 BO4561 BO4563 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Finishing Sander BO4553 BO456 BO4563 00449 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model BO4553

More information

MULTI SANDER 200W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au MSK-001 WHAT S IN THE BOX

MULTI SANDER 200W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au MSK-001 WHAT S IN THE BOX WHAT S IN THE BOX MULTI SANDER 200W INSTRUCTION MANUAL SPECIFICATIONS Motor: No Load Speed: Paper Fitment: Paper Size: Weight: ozito.com.au 200W 7,000-12,000/min Hook & Loop 145x100mm (Triangular) 125mm

More information

BISCUIT JOINER 1010W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au BJK-1010 WHAT S IN THE BOX. Biscuit Joiner. Pin Spanner.

BISCUIT JOINER 1010W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au BJK-1010 WHAT S IN THE BOX. Biscuit Joiner. Pin Spanner. WHAT S IN THE BOX BISCUIT JOINER 1010W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Power: 1010W No Load Speed: 11,000/min Blade Bore Diameter: 22mm Max. Cutting Depth: 14mm Fence Adjustment:

More information

Rotary Hammer HR4501C HR4510C HR4511C INSTRUCTION MANUAL

Rotary Hammer HR4501C HR4510C HR4511C INSTRUCTION MANUAL ENGLISH INSTRUCTION MANUAL Rotary Hammer HR450C HR450C HR45C 00864 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH

More information

SAFETY AND OPERATING MANUAL 700W JIGSAW JM700JS

SAFETY AND OPERATING MANUAL 700W JIGSAW JM700JS SAFETY AND OPERATING MANUAL 700W JIGSAW JM700JS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in

More information

Instruction Manual DETAIL SANDER. Model SROM Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools.

Instruction Manual DETAIL SANDER. Model SROM Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Instruction Manual DETAIL SANDER Model SROM 1187 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Product Features: 1. On/Off Switch 2. Base Pad 3. Dust

More information

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information