MAXIMUM OVERDRIVE FREE FREE HUGE SAVINGS 2 GREAT BRANDS, MILES OF SAVINGS. USA vises. Air Tools Workholding Hand Tools Metalworking

Transcription

1 EFFECTIVE MAY 1 AUGUST 31 WIN BIG! SIGN UP FOR the JET 50th SWEEPSTAKES jettools.com/50 MAXIMUM OVERDRIVE 2 GREAT BRANDS, MILES OF SAVINGS 125 PC. SOCKET WRENCH SET With the purchase of select WiltOn Products HUGE up to SAVINGS See page 37 50th Anniversary JET Panel Truck HURRY! LIMITED QUANTITY AVAILABLE material Handling Air Tools Workholding Hand Tools Metalworking NEW NEW USA vises NEW SAVINGS Page 41 SAVINGS Page 6 SAVINGS Page 14 SAVINGS Page 16 SAVINGS Page 37

2 MAXIMUM OVERDRIVE 50 YEARS of Quality, Innovation and Service For the past 50 years, no other company has provided the level of expertise and dependability like JET. When you buy a JET product, you are buying the results of countless hours of research, design, engineering and manufacturing from around the world. Each JET product is built with the most innovative features and highest quality within its respective product class. Combine that with the industry s most competitive warranty plus award-winning customer service and you get a value that is impossible to pass up. For a limited time, receive a miniature JET 50th Anniversary Panel Truck when you purchase select JET products. Act quickly, quantities are limited! 2 GREAT BRANDS, MILES OF SAVINGS JET 50th Anniversary Panel Truck 1:24 Scale Die-Cast Collectible 1957 Chevy Panel Truck HURRY! LIMITED QUANTITY AVAILABLE Contents: With the purchase of select JET products MATERIAL HANDLING Overhead lifting Warehouse/Dock Equipment AIR TOOLS Light Industrial WORKHOLDING Vises Clamps With the purchase of select Wilton products 6" & 10" Turtle Wax Waxers 5 PC. Precision Mini Plier Set 6 PC. Combination Wrench Set Flex Handle Socket & Bit Set 125 PC. Socket Wrench Set 26 PC. Socket Wrench Set HAND TOOLS Punches Cutters...23 METALWORKING Saws Lathes Mills Mill Accessories...38 Drills Forming Finishing WIN BIG! + + WITH THE ULTIMATE YEAR-LONG GIVEAWAY JETTOOLS.COM/50

3 NEW material handling L-100 series manual chain hoists jlh series lever hoists JLH Series Manual Chain Hoists 3/4 ton to 6 ton Capacities Available in 5ft, 10ft, 15ft, and 20ft lifts standard, custom lifts available Light weight, compact design for low head room applications All units feature premium 100 grade chain for extreme wear resistance Patented fused break disc design for low maintenance Caged roller bearings used on load sprocket increase ease of use and efficiency L-100 Series Manual Chain Hoists All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications Triple-spur gears provide high efficiency with minimum effort Heat treated and hardened 100 grade load chain Smooth rolled edge on hand chain cover prevents side pull jamming Available with slip clutch overload protection. See Pages 4 through 8 For More Information across the miles - across the board - Get more mileage WITH Jet & Wilton Products jettools.com wiltontool.com

4 SMH SERIES HAND CHAIN HOISTS Full range capacity 1/2- to 10-tons Standard features found only in higher priced models Economical hand chain hoist designed for years of trouble-free service 10', 15', 20' and 30' lifts standard, custom length lifts available All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications Needle bearing supported load sheave for smooth operation STOCK NO /2 TON chain HOISTS Rated Standard Lift (Ton) (FT) SMH-1/2T-10 1/ SMH-1/2T-15 1/ SMH-1/2T-20 1/ SMH-1/2T-30 1/ TON chain HOISTS Rated Standard Lift (Ton) (FT) SMH-1T SMH-1T SMH-1T SMH-1T with overload protection SMH-1TWO SMH-1TWO /2 TON chain HOISTS Rated Standard Lift (Ton) (FT) SMH-1-1/2T / SMH-1-1/2T / SMH-1-1/2T / SMH-1-1/2T / TON chain HOISTS Rated Standard Lift (Ton) (FT) SMH-2T SMH-2T SMH-2T SMH-2T with overload protection SMH-2TWO SMH-2TWO TON chain HOISTS Rated Standard Lift (Ton) (FT) SMH-3T SMH-3T SMH-3T SMH-3T with overload protection SMH-3TWO SMH-3TWO TON chain HOISTS Rated Standard Lift (Ton) (FT) SMH-5T SMH-5T SMH-5T SMH-5T with overload protection SMH-5TWO SMH-5TWO TON chain HOISTS Rated Standard Lift (Ton) (FT) SMH-10T , , SMH-10T , , SMH-10T , , SMH-10T , , See page 136, 137 of the 2006 Industrial Catalog, No , for more information. 4 Effective May 1, 2008 through August 31, 2008

5 overhead lifting material handling L-90 SERIES HAND CHAIN HOISTS Full range capacity 1/2 to 10 ton Compact and portable for ease of positioning material Engineered for commercial and industrial lifting applications 10', 15', 20' and 30' lifts standard, custom length lifts available All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications Completely enclosed Weston type automatic brake system for positive load spotting Triple-spur gears provide high efficiency with minimum effort Heat treated and hardened grade 80 load chain Smooth rolled edge on hand chain cover prevents side pull jamming Wide throat drop forged safety hooks for easier rigging STOCK NO STOCK NO Mini-mite series lever hoists Compact size fits easily in a truck or tool box Dependable, lightweight and portable heavyduty lever hoist for industrial applications 1/4 to 6 ton capacities All steel construction with a durable powder coat finish Simple design makes routine inspection and maintenance easy Free wheeling feature, without load, for quick load attachment Premium 100 grade load chain resists abrasion Completely enclosed Weston type automatic brake system for precise load positioning Wide throat hooks feature heavy-duty latches for easy rigging Proof tested with test certificate Complies with OSHA, ANSI/ASME B30.21 and HST-2 standards 1/2 TON chain HOISTS Rated Cap. Standard Lift (Ton) (FT) L-90-1/2 T-10 1/ L-90-1/2T-15 1/ L-90-1/2T-20 1/ L-90-1/2T-30 1/ TON chain HOISTS L-90-1T L-90-1T L-90-1T L-90-1T /2 TON chain HOISTS L /2T / L /2T / L /2T / L /2T / TON chain HOISTS L-90-2T L-90-2T L-90-2T L-90-2T TON chain HOISTS L-90-3T L-90-3T L-90-3T L-90-3T , TON chain HOISTS L-90-5T , L-90-5T , L-90-5T , L-90-5T , , TON chain HOISTS L-90-10T-11-1/ /2 2, , L-90-10T , , L-90-10T , , See page of the 2006 Industrial Catalog, No , for more information. 1/4 TON LEVER HOISTS Rated Standard Lift (Ton) (FT) MM-25S-5 1/ MM-25S-10 1/ /2 TON LEVER HOISTS MM-50S-5 1/ MM-50S-10 1/ MM-50S-15 1/ MM-50S-20 1/ TON LEVER HOISTS MM-75S-5 3/ MM-75S-10 3/ MM-75S-15 3/ MM-75S-20 3/ /2 TON LEVER HOISTS MM-150S-5 1-1/ MM-150S / MM-150S / MM-150S / TON LEVER HOISTS MM-300S MM-300S MM-300S MM-300S TON LEVER HOISTS MM-600S MM-600S , See page of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 5

6 L-100 SERIES CHAIN HOISTS All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications Triple-spur gears provide high efficiency with minimum effort Heat treated and hardened 100 grade load chain Smooth rolled edge on hand chain cover prevents side pull jamming Dropped forged alloy steel safety hooks feature wide throats for ease of rigging Patented fused disc brakes offer longer life and ease of replacement Sealed ball bearing supported load sheave s with slip clutch overload protection available NEW STOCK NO /2 TON chain HOISTS Rated (ton) Rated (lbs) Standard Lift (ft) L / L / L / L / with overload protection L100-50WO-10 1/ TON CHAIN HOISTS Rated (ton) Rated (lbs) Standard Lift (ft) L L L L with overload protection L WO TON CHAIN HOISTS Rated (ton) Standard Lift (ft) L L L L with overload protection L WO /2 TON CHAIN HOISTS Rated (ton) Rated (lbs) Standard Lift (ft) L / L / L / L / with overload protection L WO / TON CHAIN HOISTS Rated (ton) Standard Lift (ft) L L L L , with overload protection L WO TON CHAIN HOISTS Rated (ton) Rated (lbs) Standard Lift (ft) L L L L with overload protection L WO TON CHAIN HOISTS Rated (ton) Standard Lift (ft) L , , L , , L , , with overload protection L WO , , Effective May 1, 2008 through August 31, 2008

7 overhead lifting material handling JLP series lever HOISTS Economical lever hoist designed for years of trouble-free operation 1/4-ton to 6-ton capacities 5, 10, 15 and 20 lifts standard, custom length lifts available All steel construction with a durable powder coat finish Completely enclosed Weston type automatic brake system holds load in any position Easy-to-use with single hand operation and control STOCK NO /4 TON LEVER HOISTS Rated Standard Lift (Ton) (FT) JLP / /2 TON LEVER HOISTS Rated (Ton) Standard Lift (FT) JLP / JLP / /4 TON LEVER HOISTS Rated Standard Lift (Ton) (FT) JLP / JLP / JLP / JLP / with Overload Protection JLP-75WO-5 3/ JLP-75WO-10P 3/ JLP-75WO-15P 3/ JLP-75WO-20P 3/ /2 TON LEVER HOISTS Rated (Ton) Standard Lift (FT) JLP / JLP / JLP / JLP / with Overload Protection JLP-150WO-5 1-1/ JLP-150WO / JLP-150WO / JLP-150WO / with Point Hooks JLP SH 1-1/ JLP SH 1-1/ JLP SH 1-1/ with overload protection and point hooks JLP SHO 1-1/ JLP SHO 1-1/ JLP SHO 1-1/ TON LEVER HOISTS Rated Standard Lift (Ton) (FT) JLP JLP JLP JLP with Overload Protection JLP-300WO JLP-300WO JLP-300WO JLP-300WO with Point Hooks JLP SH JLP SH JLP SH with overload protection and point hooks JLP SHO JLP SHO JLP SHO TON LEVER HOISTS Rated (Ton) Standard Lift (FT) JLP JLP , See page 142, 143 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 7

8 jlh series lever hoists 3/4 ton to 6 ton Capacities Available in 5ft, 10ft, 15ft, and 20ft lifts standard, custom lifts available Light weight, compact design for low head room applications All units feature premium 100 grade chain for extreme wear resistance Patented fused break disc design for low maintenance Caged roller bearings used on load sprocket increase ease of use and efficiency NEW STOCK NO T LEVER HOISTS Rated (tons) Standard Lift (ft) weight (lbs) JLH JLH JLH JLH with overload protection JLH-80WO JLH-80WO JLH-80WO T LEVER HOISTS Rated (tons) Standard Lift (ft) weight (lbs) JLH JLH JLH JLH with overload protection JLH-100WO JLH-100WO JLH-100WO T LEVER HOISTS Rated (tons) Standard Lift (ft) weight (lbs) JLH JLH JLH JLH WITH POINT HOOKS JLH SH JLH SH JLH SH with OVERLOAD PROTECTION JLH-160WO JLH-160WO JLH-160WO with point hooks AND OVERLOAD PROTECTION JLH PSH JLH PSH JLH PSH T LEVER HOISTS Rated (tons) Standard Lift (ft) weight (lbs) JLH JLH JLH JLH with overload protection JLH-250WO JLH250WO JLH250WO JLH Series Lever Hoists.8T-1.6T JLH Series Lever Hoists 2.5T-6.3T 3.2T LEVER HOISTS Rated (tons) Standard Lift (ft) weight (lbs) JLH JLH JLH JLH with point hooks JLH SH JLH SH JLH SH WITH OVERLOAD PROTECTION JLH-320WO JLH-320WO JLH-320WO with point hooks and overload protection JLH PSH JLH PSH JLH PSH T LEVER HOISTS Rated (tons) weight (lbs) Standard Lift (ft) JLH JLH JLH JLH , with overload protection JLH-630WO JLH-630WO , JLH-630WO , Effective May 1, 2008 through August 31, 2008

9 warehouse & dock material handling hd SERIES HEAVY-DUTY BEAM CLAMPS 1-ton to 5-ton capacities Mount hoists or lift beams with portable light-weight clamp STOCK NO NEW jch series linesman pullers Heavy-duty cable puller designed to lift, lower, stretch, or pull heavy loads 1-1/2 and 2-ton capacities available Drop forged hooks with safety latches standard Complies with ANSI/ASME B30.21 standards Rated Cap y Beam Flange Width HD-1T 2, / HD-2T 4, / HD-3T 6, /8 10-5/ HD-5T 10, /8 10-5/ GT SERIES INDUSTRIAL-dUTY GEARED TROLLEYS WITH hand CHAIN Hand chain gear system provides precision load spotting through a wide range of beams For use with wide-flange H-beams, standard I-beams, or curved track STOCK NO Chain Length (ft.) Beam Flange Width Beam Height Min. Radius Curve Lift in.) Cap y (ton) /2 GT 1/ GT / GT / GT GT GT , , See page 152 of the 2006 Industrial Catalog, No , for more information. hdt series heavy-duty plain trolleys 1/2-ton through 5-ton capacities Multiple spacer washers make beam flange wide adjustment quick and easy Hardened wheels with lubricated for life, double sealed ball bearings STOCK NO Beam Flange Width Beam Height Min. Radius Curve weight (ton) /2-HDT 1/2 2-1/ / HDT / HDT 2 3-1/ / HDT / HDT 5 4-5/ / See pages 151 of the 2006 Industrial Catalog, No , for more information STOCK NO Lever Ratio STOCK NO K Handle length Cable Length (ft.) Cable Diameter ping heavy-duty grip pullers General Line Specifications JCH :1 25-1/4 30 1/4 14-1/ JCH :1 29-7/8 20 1/ See page 163 of the 2006 Industrial Catalog, No , for more information. Industrial quality grip puller designed to lift, lower, or pull heavy loads 3/4-ton to 3-ton capacities Easy-to-use in any direction, angle, or length of pull or lift Description K JG-75A 3/4T Wire Rope Grip Puller w/cable K JG-150A 1-1/2T Wire Rope Grip Puller w/cable K JG-300A 3T Wire Rope Grip Puller w/cable /4T Wire Rope 66 Ft /2 T Wire Rope 66 Ft T Wire Rope 66 Ft See page 162 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 9

10 Jhj series air/hydraulic bottle jacks For lifting, pushing, spreading, bending, pressing or straightening requirements Not affected by temperature extremes Low profile truck models or standard models brk series hydraulic body repair kits Let hydraulic power make light work of body or collision repairs Straighten, bend, press or spread steel with 4-ton or 10-ton capacity models Automatic safety overload system protects equipment Proof tested and certified to meet ANSI/ASME B30.1 standards Two-stage piston for quick-action pump with BRK10A STOCK NO Rated (ton) Minimum Height Piston Height Maximum Height Base Size (LxW/in.) JHJ /8 4-1/2 13-5/8 4-1/2 x 2-1/ JHJ /2 4-1/2 14-3/8 4-9/16 x 2-13/ JHJ /8 4-5/8 15-1/2 5-5/8 x 3-1/ JHJ /8 4-5/8 15-1/2 6 x 3-1/ JHJ-12 1/2 12-1/2 9-1/2 5-7/8 18-1/2 6-1/2 x 4-1/ K JHJ-12 1/2L 12-1/2 6-3/4 3-3/4 13-3/8 6-1/2 x 4-1/ JHJ-17 1/2 17-1/2 10-3/8 6-1/ /8 x 4-5/ K JHJ-17 1/2L 17-1/2 6-3/4 3-1/ /8 x 4-5/ JHJ-22 1/2 22-1/2 10-5/8 6-1/4 16-7/8 7-1/8 x 5-1/ K JHJ-22 1/2L 22-1/2 7-1/8 3-3/ /4 x 5-1/ K JHJ /4 17-1/4 8-3/8 x 5-1/ K JHJ /4 8-5/8 9-1/4 x 7-3/ K JHJ / /32x 10-7/16 3, , See page 169 of the 2006 Industrial Catalog, No , for more information. jtj series industrial-duty toe jacks Heavy-duty, industrial quality, dual purpose jack Designed for lifting loads with very low minimum clearances (toe) or high clearances (head) Ideal for house moving, machinery installation and application at shipyard, bridge building or plant construtction sites NEW STOCK NO No. of Pieces BRK-4A BRK-10A See pages 171 of the 2006 Industrial Catalog, No , for more information. trucks j series pallet 5,000 pound capacity High quality welded steel construction with a durable powder coat finish 2-1/2" low profile design for smaller size pallet openings STOCK NO STOCK NO Rated Cap y Toe (ton) Toe Ht Min (in) Toe Ht Max Head Ht Min Head Ht Max (in) JTJ-2ST 2 5/8 5-1/16 9-3/8 13-3/ JTJ-5ST 5 7/8 5-9/ /4 16-1/ JTJ-10ST /8 6-13/ /8 18-1/ Description PT-1636J, 16"x36" Forks PT-2036J, 20"x36" Forks PT-2042J, 20"x42" Forks PT-2048J, 20"x48" Forks PT-2736J, 27"x36" Forks PT-2742J, 27"x42" Forks PT-2748J, 27"x48" Forks See page 182 of the 2006 Industrial Catalog, No , for more information. 10 Effective May 1, 2008 through August 31, 2008

11 warehouse & dock material handling trucks 5,500 lb. capacity 2-1/2" lowered height 210 turning radius PTX series pallet truck JTX series pallet 8,000 pound capacity One-piece cast pump features high quality seals, hardened and chrome plated ram and piston, top-of stroke and overload bypass valves STOCK NO Description PTX-2048, 20"x48" Pallet Truck PTX-2036, 20"x48" Pallet Truck PTX-2748, 20"x48" Pallet Truck See page 183 of the 2006 Industrial Catalog, No , for more information STOCK NO Description JTX-2748, 27"x48", 8,000lb Pallet Truck See page 186 of the 2006 Industrial Catalog, No , for more information. W SERIES PALLET TRUCKS 6,000 pound capacity 200º turning radius allows room to maneuver in tight quarters Articulating 7" poly-over-aluminum steer wheels ensure continual contact with uneven floors JWS series WINCH STAKER Simple, easy way to lift, lower and transport heavy loads with minimum effort Heavy-duty welded steel frame with a durable powder coat finish Low effort hand winch equipped with automatic brake system and adjustable length handle Easy to maneuver with large diameter swivel casters Swivel casters feature foot brake to prevent movement Adjustable width forks provide versatility JWS-770 features adjustable leg widths Adjustable width forks and outrigger legs handle all pallet sizes STOCK NO PT-2036W, 20"x36" Forks PT-2042W, 20"x42" Forks PT-2048W, 20"x48" Forks PT-2736W, 27"x36" Forks PT-2742W, 27"x42" Pallet Truck PT-2748W, 27"x48" Pallet Truck See page 184 of the 2006 Industrial Catalog, No , for more information STOCK NO Description JWS-770 Adjustable Legs Optional Accessories Cap'y Pallet Cap'y (LxW/in) Load Center Max. Lift Height Description SP-770, Optional Steel Platform, Fits JWS See page 188 of the 2006 Industrial Catalog, No , for more information x jettools.com wiltontool.com 11

12 jhs series hydraulic stacker Economical and ergonomic way to handle standard 40" x 48" pallets Works like a manual forklift to load or unload trucks or stock shelves Heavy-duty welded steel frame with a durable powder coat finish Powerful two-stage hydraulic pump features quicklift with no load, top-of-stroke and safety overload bypass system STOCK NO Cap'y Pallet Cap'y (LxW/in.) Load Center Max.Lift Height JHS x , Optional Accessories Description SP-2200, Optional Steel Platform, Fits JHS See page 188 of the 2006 Industrial Catalog, No , for more information STOCK NO STOCK NO LOAD binders Drop-forged, heat-treated alloy steel construction Take up slack and secure chain around cargo in one operation Min./Max. Chain Size transport chain System 7 (transport quality) chain is grade 70 with yellow zinc finish Drop forged clevis grab hooks Complies with US DOT regulations Working Load Limit Handle Length Take-Up LB-8 3/16 / 1/4 11-7/8 2-3/ LB-19 5/16 / 3/8 15-3/ LB-28 3/8 / 1/2 18-1/ RLB-19 5/16 / 3/ See page 190 of the 2006 Industrial Catalog, No , for more information. Description /16-TC-20 Transport Chain with hooks /16-TC-40 Transport Chain with hooks /8-TC-20 Transport Chain with hooks /8-TC-40 Transport Chain with hooks Use JET hardwood dollies for moving furniture, bulky crates and many other items Kiln dried oak used to prevent warping or shrinkage STOCK NO APT SERIES ALUMINUM PLATFORM CARTS Lightweight, corrosion-resistant aluminium platform trucks are built for heavy-duty use Box style frame is made of high strength welded aluminium channel Corner sockets at both ends allow handles to be used on either side of the truck STOCK NO hardwood dollies Bed Type Size (LxW/in.) Carton Pack WDF-2416 Flush End 24 x WDF-3018 Flush End 30 x WDS-2416 Solid Top 24 x WDS-3018 Solid Top 30 x WDS-3624 Solid Top 36 x WDC-3018 Carpet End 30 x WDC-3624 Carpet End 36 x WDR-3018 Rubber End 30 x See page 179 of the 2006 Industrial Catalog, No , for more information. Platform Size Platform Height Handle Height Caster Size ping Cap'y APT x x APT X X See page 178 of the 2006 Industrial Catalog, No , for more information. PUC SERIES HEAVY-DUTY RESIN SERVICE CARTS Heavy-duty resin construction resists dents, chips, and rust Handle has built in storage bins Round corners mean no sharp edges to nick walls or furniture Large, quiet, non-marking 5" casters STOCK NO Max. Cap'y Shelf Size Upper Shelf Height Lower Shelf Height ping (lbs) PUC /8x17-1/8 33-1/ PUC /8x25-5/8 33-1/ See page 178, of the 2006 Industrial Catalog, No , for more information. 12 Effective May 1, 2008 through August 31, 2008

13 NEW air tools ergo grip air tools JSM-4140 JSM See the following pages for more NEW ERGO-GRIP tools Ergo Grip Die Grinders Ergonomic grip for operator comfort Built in air regulator for precise speed control Equipped with a safety throttle lock Heavy duty ball bearing construction Rotating air inlet keeps air hose twist free Low noise volume for operator comfort Ergo Grip Impact Wrenches Ergonomic Grip for increased operator comfort Multiple torque setting available with easy to use dial on back of impact wrench Heavy duty ball bearing construction Rotating air inlet keeps air hose twist free Low noise volume Super light weight composite design AG Ergo Grip Angle Grinders Speed regulating governor maintains constant speed and torque control while grinding and prevents over-speed with free running Light weight composite body Wheel guard adjusts to 9 different positions without tools Vibration absorbing handle allows longer use without operator fatigue Lightweight, Ergonomic Operator Comfort, With Heavy-Duty Construction jettools.com wiltontool.com

14 ergo grip air tools NEW ERGO GRIP IMPACT WRENCHES Ergonomic Grip for increased operator comfort Multiple torque setting available with easy to use dial on back of impact wrench Heavy duty ball bearing construction Rotating air inlet keeps air hose twist free Low noise volume Super light weight composite design BELT SANDER Ergonomic Handle design Throttle features safety lock switch Built in air swivel keeps air hose twist free Rear exhaust directs air away from work Equipped with exhaust silencer for noise reduction Built in regulator for positive speed control STOCK NO. JSM STOCK NO. JSM-6100 Square Drive (IN) Bolt (IN) Anvil Retainer Type Max Torque (FT/LBS) Ergonomic grip for operator comfort Built in air regulator for precise speed control Equipped with a safety throttle lock Heavy duty ball bearing construction Rotating air inlet keeps air hose twist free Low noise volume for operator comfort Free Speed (RPM) weight (LBS) JSM /8 1/2 RING / JSM /2 1/2 RING / JSM /2 3/4 RING / ERGO GRIP DIE GRINDERS Belt Size (WxL/IN) Noise level (db) Horse Power (HP) Free Speed (RPM) Air Pressure (PSI) Heavy duty ball and needle bearing construction Full gear cage Ergonomic grip Built in air regulator for precise control Rear exhaust Low operating volume Swiveling air inlet keeps air hose tangle free (LBS) JSM /8 x /2 18, / ERGO GRIP AIR RATCHETS STOCK NO. JSM-5130 Horse Power (HP) Free Speed (RPM) Air Pressure (PSI) Air Inlet (NPT/ IN) Air Hose (ID/ IN) Overall Length (in) weight (LBS) JSM /2 20, /4 3/8 7-2/5 1-1/ JSM /2 4, /4 3/8 8-3/ JSM-5130L 1/2 20, /4 3/8 13-7/ JSM /4 20, /4 3/8 6-1/ STOCK NO. JSM-3330 Square Drive (IN) Bolt (IN) Anvil Retainer Type Maximum Torque (FT/LBS) Free Speed (RPM) (LBS) JSM /8 1/2 Ball / JSM /2 1/2 Ball / Effective May 1, 2008 through August 31, 2008

15 air tools NEW ergo grip air tools NEW ERGO GRIP REVERSIBLE AIR DRILLS Ball bearing and needle bearing construction for more efficient performance Muffled Handle Exhaust for quiet operation Pistol grip models have variable speed triggers for positive control All models equipped with Jacobs chucks 1/2" model has an auxiliary side handle for better control ERGO GRIP AIR SCREWDRIVERS Ergonomic handle design Ball and needle bearing construction for more efficent performance Muffled handle exhaust for quiet operation All pistol grip models have variable speed triggers for positive control STOCK NO. JSM-7572 Chuck Size (IN) Spindle Thread (IN/TPI) Horse Power (HP) Free Speed (RPM) (LBS) JSM /8 3/8-24 1/ JSM /2 3/8-24 1/ / STOCK NO. JSM-8272 Chuck type Chuck Size (IN) Horse Power (HP) Free Speed (RPM) Torque (FT/ LBS) (LBS) JSM-8272 Adjustable 1/4 1/ / JSM-8372 Adjustable 1/4 1/ JSM-8672 Positive 1/4 1/ / JSM-8472 Positive 1/4 1/ / ERGO GRIP ANGLE GRINDERS Speed regulating governor maintains constant speed and torque control while grinding and prevents over-speed with free running Light weight composite body Wheel guard adjusts to 9 different positions without tools Vibration absorbing handle allows longer use without operator fatigue STOCK NO Wheel Size (Dia x Bore x Thk/In) Spindle Thread (IN/TPI) Horse power (HP) Free Speed (RPM) Air Press. (PSI) AG-4S 4 x 5/8 x 1/4 3/8-24 3/ AG-4.5S 4-1/2 x 5/8 x 1/4 5/8-11 3/ jettools.com wiltontool.com 15

16 american made vises Ductile iron castings are placed in tooling and loaded into CNC machines for precise milling of the vise jaws, anvil, and round channel. Machined ductile iron castings are loaded into fixtures during assembly for quality assurance. TRADESMAN VISE Replaceable, serrated pipe jaws hold up to 3-1/2" pipe Replaceable, hardened steel, machine-serrated top jaw inserts assure a positive hold Enclosed design keeps contaminants out and lubrication in for a lifetime of smooth operation Horizontal spindle and nut eliminate thread wear and provide increased clamping power 60,000 PSI tensile ductile iron body parts provide mass and strength Large anvil work surface Swivel base rotates 360 degrees with serrated edge and double lockdowns for non-slip holding COMBINATION PIPE AND BENCH VISE SWIVEL BASE Self-centering hardened steel pipe jaws hold up to 6" pipe safely and securely Replaceable, hardened steel, machine-serrated top jaw inserts assure a positive hold Enclosed design keeps contaminants out and lubrication in for a lifetime of smooth operation Horizontal spindle and nut eliminate thread wear and provide increased clamping power 60,000 PSI tensile ductile iron body parts provide mass and strength Large anvil work surface Swivel base rotates 360 degrees with serrated edge and double lockdowns for non-slip holding STOCK NO STOCK NO Jaw Width Jaw Opening Throat Depth Pipe Jaw / /4 1/4 2-1/ / /4 1/ /2 6-1/2 4 1/4 3-1/ A /4 1/8 3-1/ Jaw Width Jaw Opening Throat Depth Pipe Jaw C-0 3-1/ /2 1/8 2-1/ C-1 4-1/ /4 1/8 3-1/ C /16 1/8 4-1/ , , C /8 1/ , , See page 236 of the 2006 Industrial Catalog, No , for more information. See page 235 of the 2006 Industrial Catalog, No , for more information. across the miles-across the USA-savings on Jet and Wilton products jettools.com wiltontool.com

17 Assembled vises are staged after paint is applied Vises are removed from staging and lined up for final inspection and packaging. All-WEATHER OUTDOOR VISES SWIVEL BASE This version of the Pipe and Bench Vise has nickel plated main jaws, pipe jaws, spindle, and locknuts to prevent corrosion MACHINIST SWIVEL BASE VISE Replaceable, hardened steel, machine-serrated top jaw inserts assure a positive hold Enclosed design keeps contaminants out and lubrication in for a lifetime of smooth operation Horizontal spindle and nut eliminate thread wear and provide increased clamping power 60,000 PSI tensile ductile iron body parts provide mass and strength Large anvil work surface Swivel base rotates 360 degrees with serrated edge and double lockdowns for non-slip holding STOCK NO Jaw Width Jaw Opening Throat Depth Pipe Jaw AW35 3-1/ /2 1/8 2-1/ AW45 4-1/ /4 1/8 3-1/2 78 1, STOCK NO Jaw Width Jaw Opening Throat Depth S 3 4-3/4 2-5/ S 3-1/2 5-1/4 2-3/ S 4 6-1/2 3-1/ S 4-1/2 7-1/ S /4 95 1, S / , , S / , , See page 235 of the 2006 Industrial Catalog, No , for more information. See page 236 of the 2006 Industrial Catalog, No , for more information. across the miles-across the USA-savings on Jet and Wilton products Effective May 1, 2008 through August 31, 2008

18 MECHANICS VISE Heavy duty 30,000 PSI castings for long life and added strength Large anvil work surface Swivel base rotates 360 and has double lockdowns ensuring maximum stability Powder coat paint resists scratches and provides a tough durable finish Replaceable hardened steel top and pipe jaws 600 SERIES UTILITY VISE SWIVEL BASE Heavy-duty 30,000 PSI casting for strength and durability Large anvil work surface 180 swivel base with lockdown allows for quick and easy positioning Powder coat paint resists scratches and provides a tough durable surface Built-in pipe jaws handle various pipe sizes Perfect for general clamping applications STOCK NO Jaw Width Jaw Opening Throat Depth Pipe Jaw /2 3-7/16 1/ /4 3-3/4 1/4 2-1/ /4 4-1/8 1/4 3-1/ A 8 8-1/4 4-3/4 1/4 3-1/ STOCK NO Jaw Width Jaw Opening Throat Depth Pipe Jaw / /8 1/ / /16 1/8 2-1/ /2 5-1/2 3-13/16 1/8 2-1/ HD 8 7-1/2 4-1/2 1/ HD /16 1/ See page 240 of the 2006 Industrial Catalog, No , for more information. See page 237 of the 2006 Industrial Catalog, No , for more information. ALUMINUM V-GROOVE MAGNEFIX JAW CAPS Aluminum alloy design includes six grooves to compensate for the unevenness of the workpiece Deeper V-groove ensures more secure clamping of circular workpieces Use together with rubber magnefix jaw caps when clamping taper pins and spherical parts STOCK NO ALUMINUM WITH RUBBER FACE JAW CAPS Aluminum alloy with synthetic rubber cover Jaw cap conforms to workpiece and grips firmly without slipping while protecting work surface Use in combination with aluminum and prism jaw caps to clamp taper pins or tapered workpieces STOCK NO Jaw Width A A A / A A / A A / See page 243 of the 2006 Industrial Catalog, No , for more information. Jaw Width R R / R R / R R / R R / See page 244 of the 2006 Industrial Catalog, No , for more information. 18 Effective May 1, 2008 through August 31, 2008

19 vises workholding SUPER PRECISION 3-AXIS TILTING MACHINE VISE Perfect vise for 3-axis jobs in milling, drilling, grinding, shaping and jig boring Vise bodies are constructed of close grained, high tensile, seasoned alloy castings Tilting machine vise features 360 swivel base with 45 tilting left and right and 90 vertical indexing Durable polychromatic finish Jaw plates hardened and ground Hardness of jaws HRC Bases have keyways and bolt slots for machine mounting The ductile alloy vise body with flame-hardened bed provides solid work support, accuracy, and longevity The fixed jaw is rated at 85,000 PSI and the annealed, surface ground sliding jaw at 70,000 PSI Totally enclosed vise screw is cut from special alloy steel, hardened and ground The vise and optional swivel base have coolant troughs to channel fluid out of your way STOCK NO VERTI-LOCK MACHINE VISE STOCK NO Jaw Width Jaw Opening (in) (lbs) / / / , See page 234 of the 2006 Industrial Catalog, No , for more information. Jaw Width Jaw Opening (in) Jaw Depth (lbs) / / /4 83 1, / , , See page 229 of the 2006 Industrial Catalog, No , for more information. CAM ACTION QUICK ACTING DRILL PRESS VISE Simple push or pull on the center bar knob sets the jaw in position Easy press locking lever cams the jaw ahead 3/32", exerting a holding pressure that is adjustable from 400 to 1100 lbs. Base is designed for clear through drilling applications Fits most drill presses Hardened steel jaws 4" flat drill press vise has easy mounting slots and unique pivot handle design for extra clamping pressure STOCK NO Jaw Width Jaw Opening (in) (lbs) / See page 233 for more information. DRILL PRESS VISE DRILL PRESS ANGLE VISE Adjusts quickly to a full 90 vertical or horizontal position High tensile iron casting is strong and heavy Two bolt slots on base provide easy positioning on drill press table STOCK NO Jaw Width Jaw Opening (in) Jaw Depth (lbs) / /16 1-5/ / / / See page 106 of the 2006 Industrial Catalog, No , for more information STOCK NO Jaw Width Jaw Opening (in) Base Width Height /2 2-5/8 3-5/16 3-1/ /2 3-3/16 4-1/2 3-1/ / /2 3-5/ See page 89 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 19

20 400 SERIES GENERAL PURPOSE C-CLAMPS Spindles and Perma-Pad swivel heads are black-oxide coated to resist corrosion STOCK NO Opening Throat Depth Spindle Diameter Min. Proof Test Each /8 2-1/4 9/16 3, /2 9/16 3, /4 3-1/4 3/4 6, /16 4-1/8 3/4 6, /4 5 3/4 6, /8 6 3/4 8, /4 6-5/16 7/8 9, See page of the 2006 Industrial Catalog, No , for more information. 400-SF SERIES HIGH VISIBIL- ITY C-CLAMPS Powder-coated high-visibility yellow provides a tough durable finish Spindles and Perma-Pad swivel heads are black-oxide coated to resist corrosion STOCK NO Opening Throat Depth Spindle Diameter Clamp presure SF 0-2 1/8 2-1/4 9/ SF /2 9/ SF 0 4-1/4 3-1/4 3/ SF 0 6-1/16 4-1/8 3/ SF 0 8-1/4 5 3/ SF /8 6 3/ SF /4 6-5/16 7/ See page of the 2006 Industrial Catalog, No , for more information. 400-P SERIES WELDERS C-CLAMPS Copper plated spindle and Perma-Pad swivel head resist welding spatter and corrosion STOCK NO Opening Throat Depth Spindle Diameter Min. Proof Test Each P 0-2-1/8 2-5/8 9/16 3, P /2 5/8 3, P 0-4-1/4 3-1/4 3/4 6, P 0-6-1/16 4-1/8 3/4 6, P 0-8-1/4 5 3/4 6, P /8 6 3/4 8, P /4 6-5/16 7/8 9, See page of the 2006 Industrial Catalog, No , for more information. Drop forged, equipped with Wilton Perma-Pads and a precision-cut, single-lead acme thread Value alternative to the 400 Series STOCK NO SERIES FORGED C-CLAMPS Frame made of high tensile ductile alloy casting Hardened steel spindle is coated in black-oxide and equipped with a Perma- Pad swivel head Opening Throat Depth Spindle Diameter Frames made of forged steel for extra strength Steel screws come equipped with swivel heads Spindle assembly is zinc plated for longer life Throat Depth Spindle Diameter Min. Proof Test Opening Throat Depth Each /16 9/16 2, /16 9/16 3, /16 5/8 3, /16 5/8 4, /16 3/4 5, / /4 3/4 6, / /8 3/4 8, See page 251 of the 2006 Industrial Catalog, No , for more information. 540A SERIES CARRIAGE C-CLAMPS STOCK NO Clamp Pressure Clamp Pressure A-2-1/ /2 1-3/4 1/ A /8 1/ A /16 5/ A /2 5/ A /4 5/ A /4 3/ A /8 7/ A /8 7/ A /4 7/ See page 251 of the 2006 Industrial Catalog, No , for more information. SUPER-JUNIOR FORGED C-CLAMPS 4 60 STOCK NO Opening / /4 1-1/ /2 1-1/ / / /2 2-1/ See page 250 of the 2006 Industrial Catalog, No , for more information. 20 Effective May 1, 2008 through August 31, 2008

21 clamps workholding C-CLAMP 140 SERIES CARRIAGE Most popular C-clamp style for over 50 years Rugged ductile iron frames with black-oxide screws, swivels and sliding crosspin handles The original carriage clamp designed for the home craftsman, woodworker and light industrial service ECONOMY SERIES L-CLAMP Great economy alternative to the 6400 Regular Duty L-Clamp Has Black-Oxide coated spindle and handle to resist corrosion 5 50 STOCK NO STOCK NO Opening Clamp Pressure Spindle Diameter Throat Depth C / C / / C / C / / C / C / / C 0 2-1/2 1-7/ / /2C 0 2-1/2 2-1/ / Clamp Pressure Opening Throat Depth Rail Size /4 7/8 x 7/ /4 7/8 x 7/ /4 1-3/16 x 9/ /4 1-3/16 x 9/ /4 1-3/16 x 9/ /4 1-3/16 x 9/ /4 1-3/16 x 9/ See page 250 of the 2006 Industrial Catalog, No , for more information. See page 254 of the 2006 Industrial Catalog, No , for more information. COPPER PLATED L-CLAMP HEAVY-DUTY COPPER PLATED L-CLAMP Forged sliding arm design reduces clamping setup time New hex nut design makes replacing pads and spindles easy Copper plated spindles and Perma-Pad resist welding spatter Exclusive, ergonomic Wilton-Grip provides comfort, speed and visibility (included on many sizes) Forged sliding arm design reduces clamping setup time New hex nut design makes replacing pads and spindles easy Copper plated spindles and Perma-Pad resist welding spatter Exclusive, ergonomic Wilton-Grip provides comfort, speed and visibility (included on many sizes) STOCK NO STOCK NO Nominal Opening Throat Depth Nominal Rail Size Clamp Pressure B /4 1-3/16 x 9/ B /2 1-3/16 x 9/ B /4 1-3/16 x 9/ B /2 1-3/16 x 9/ B /4 1-3/16 x 9/ B /4 1-3/16 x 9/ B /4 1-3/16 x 9/ B /4 1-3/16 x 9/ Nominal Opening Throat Depth Nominal Rail Size Clamp Pressure B /16 x 3/ B /16 x 3/ B /16 x 3/ B /16 x 3/ B /16 x 3/ B /16 x 3/ See page 252 of the 2006 Industrial Catalog, No , for more information. See page 252 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 21

22 COLD CHISELS For cutting, shaping and removing metal softer than the cutting edge itself for example, metals such as cast iron, wrought iron, steel, bronze and copper CENTER PUNCHES Marking work by indentation for starting drills in metal and other materials 3 00 STOCK NO Cutting Edge Size Overall Length Carton Pack /4 1/ /16 1/ /8 5/16 5-1/ /2 7/ /8 1/2 6-1/ /4 5/ /8 3/4 7-1/ / See page 280 of the 2006 Industrial Catalog, No , for more information. 6-PIECE COLD CHISEL SET-VINYL POUCH Cold Chisels: 1/4", 1/2", 5/16", 5/8", 3/8", 3/4" 2 90 STOCK NO Point Edge Size Overall Length Carton Pack /64 1/4 3-1/ /8 5/16 4-1/ /32 3/ /4 1/ /8 5/8 6-1/ See page 281 of the 2006 Industrial Catalog, No , for more information. 5-PIECE CENTER PUNCH SET VINYL POUCH Center Punches: 5/64", 1/4", 1/8", 3/8", 5/32" STOCK NO STOCK NO Carton Description Pack Piece Cold Chisel Set See page 284 of the 2006 Industrial Catalog, No , for more information. Carton Description Pack Piece Cold Chisel Set See page 284 of the 2006 Industrial Catalog, No , for more information. WELDERS SHOE CLAMP SYSTEM Flexible design reduces number of clamps needed, set up time and storage space Reaches where conventional clamps cannot, can be located anywhere on a fixture, table or fabricated piece Direct clamp mounting-quicker and easier for aligning and leveling plates and sheets STOCK NO Opening Throat Depth Rail Size Clamp Pressure Spindle Diameter /2 5-1/2 1-3/16 x 9/ / REPLACEMENT SHOE See page 256 of the 2006 Industrial Catalog, No , for more information. 22 Effective May 1, 2008 through August 31, 2008

23 hand tools 3 30 STOCK NO PIN PUNCHES Driving and removing such things as pins and keys after initial movement by a starting punch REBAR CUTTER/BENDER Can be bolted to floor or board for easy onehand operation Patented design uses needle bearing for easy cutting Cuts and bends grade 60 rebar 5/8" ; 52" length Jaws are made of high-carbon alloy tool steel, HRC-48 Point Edge Size Pin Length Overall Length Carton Pack /16 1/4 3/ /32 5/ / /8 5/ / /32 5/ /16 3/8 1-1/8 5-1/ /32 3/8 1-1/4 5-1/ /4 3/8 1-1/4 5-3/ /16 7/16 1-3/ /8 1/2 1-1/2 6-1/ See page 282 of the 2006 Industrial Catalog, No , for more information. 7-PIECE DRIFT PIN PUNCH SET VINYL POUCH Drift Pins: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 3/32" STOCK NO Handle Cap'y Jaw Length Type RCB-16NDLX 52 5/8 Shear Cut Replacement Head for Rebar Cutter/Bender HRC-48 (in) RH-16 5/ * * Includes jaws, center and mounting bolt assemblies See page 222 of the 2006 Industrial Catalog, No , for more information STOCK NO Carton Description Pack Piece Punch Set See page 286 of the 2006 Industrial Catalog, No , for more information. HEAVY-DUTY BOLT CUTTERS For cutting concrete reinforcing rods (rebar), medium tensile and soft bolts, rods, rivets, bars and chains Jaws are made of high-carbon alloy tool steel Maximum hardness of material to be cut: Rockwell C-40 Steel handles are angled with rubber hand grips for maximum leverage Exceeds Federal Specification No. GGG-C-740d Type II LINING UP/DRIFT PIN PUNCHES Alinging and sizing holes in light gauge metal and other materials 3 40 STOCK NO Point Edge Size Overall Carton Taper Length Pack /8 5/16 3-1/ /32 3/8 4-1/ /16 1/2 6-1/ /4 5/8 7-1/ /16 3/4 7-1/ /8 3/ /2 7/8 9-1/ See page 283 of the 2006 Industrial Catalog, No , for more information STOCK NO Handle Length Cap y Jaw Type Carton Pack Black Head BC-18B 18 5/16 Center Cut BC-24B 24 3/8 Center Cut BC-30B 30 1/2 Center Cut BC-36B 36 5/8 Center Cut Red Head BC-18R 18 5/16 Center Cut BC-24R 24 3/8 Center Cut BC-30R 30 1/2 Center Cut BC-36R 36 5/8 Center Cut See page 220 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 23

24 NEW metalworking PIPE BENDERS 22" VARIABLE SPEED DRILL PRESS JTM 1054R MILLING MACHINE Simple manual operation for ease of use t Six bending dies included standard (1/2", 3/4", 1", 1-1/4", 1-1/2", 2") Rotating stand locks in three positions for stability and versatility Heavy-duty hydraulic cylinder capable of bending schedule 40 pipe Completely manual so external power is not needed Unique gear drive for maximum torque to spindle Variable spindle speeds from 60 to 1800RPM Digital LED spindle speed readout Large T-slotted production table Keyed safety Lock switch T-slotted base for large work pieces 3HP or 5HP, 3Ph motor Variable speed head Meehanite casting One-shot lubrication system Way Covers Draw Bar Tool box with tools shop our metalworking savings coast to coast Effective May 1, 2008 through August 31, 2008

25 3" AND 5" PORTABLE VARIABLE SPEED BANDSAW Electronic variable speed Safety trigger switch on/off Quick acting vise Mitering capacity to 45, 60 5" X 6" HORIZONTAL/ SWIVEL HEAD BANDSAW Head swivels for a maximum cut at 45 & 60 Hydraulic down feed control Quick action vise STOCK NO PB-85 PB-150 Cutting : Round at /4 5-7/8 Round at /2 3-1/2 Round at 60 NA 2-1/2 Rectangle at /4 x 3-7/8 5-1/2 x 5-7/8 Rectangle at /4 x 2-1/2 3-1/2 x 3-7/8 Rectangle at 60 NA 2-1/2 x 2-3/4 Blade Size 1/2 x.025 x 52-1/8 1/2 x.025 x 68-1/4 Blade Speeds (SFPM) Blade Wheel Diameter 6-1/2 8-1/4 Motor 850KW, 115V, 1Ph 1500KW, 115V, 1Ph Overall Dimensions (in./l x W x H) 26-3/4 x 13-3/8 x 20-1/2 39-3/8 x 15-1/4 x 22-7/16 Net , Accessories & Blades Stand for Portable Bandsaw PB85-PB Buy a JET Bandsaw and get a 50th Anniversary Panel Truck See page 5 of the 2006 Industrial Catalog, No , for more information STOCK NO HBS-56S Cutting : Round at 90 5 Round at /4 Round at /4 Rectangle at 90 6 x 5 Rectangle at 45 4 x 2-3/4 Rectangle at /16 x 1-3/4 Motor 1/2HP, UL listed, 115/230V, 1Ph, Prewired 115V Floor Space Required (in./l x W x H) 42 x 18 x 44 Net See page 7 of the 2006 Industrial Catalog, No , for more information. 5" X 6" HORIZONTAL/ VERTICAL BANDSAW UL listed single phase motor Exclusive design heavy-duty 14-gauge stand Large diameter wheels and built-in handle allows easy movement Front legs feature adjustable leveling pads STOCK NO " X 8" HORIZONTAL METAL CUTTING BANDSAW Adjustable hydraulic feed system Adjustable ball bearing guides Heat treated steel worm gear and bronze drive gear STOCK NO HVBS-56M Round at 90 Degrees (dia./in.) 5 Round at 45 Degrees (dia./in.) 3 Rectangle at 90 Degrees (H x W/in.) 5 x 6 Rectangle at 45 Degrees (H x W/in.) 5 x 3 Throat Depth 6 Vertical Worktable (W x L/in.) 9-5/8 x 9-1/2 Vise Swivels (deg.) 45 Blade Size (W x T x L/in.) 1/2 x x 64-1/2 Blade Wheel Diameter 7-3/8 Blade Speeds (FPM) 80, 120, 200 Motor 1/2HP, 1Ph, 115/230V, Prewired 115V Net See page 6 of the 2006 Industrial Catalog, No , for re information. s 3130 (Dry) 3230K (Wet) Cutting : Round at Round at Rectangle at /2 x 5 7-1/2 x 5 Rectangle at /2 x 5 4-1/2 x 5 Blade Size 1/2 x.025 x 68-1/2 1/2 x.025 x 68-1/2 Blade Speeds (SFPM) Blade Wheel Diameter 7-1/2 7-1/2 Bed Height 23-1/2 23-/12 Motor 1/2HP, 115V, 1Ph, 1725 RPM 1/2HP, 115V, 1Ph, 1725 RPM Floor Space Required (in./l x W x H) 37 x 16 x x 16 x 37 Net See page 18 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com bandsaws 25

26 7" X 12" HORIZONTAL BANDSAW Blade Guides: Side: Eccentric shaft, ball bearing Rear: Ball bearings Blade drive is steel, heat treated worm, driving a bronze worm gear in oil bath Heavy-duty cast iron saw head and table Oil bath hardened and ground worm gear STOCK NO s Cutting : Round at Round at Rectangle at x 7 10 x 7 Rectangle at 45 6 x 7 6 x 7 Blade Size 3/4 x.035 x 93 3/4 x.035 x 93 Blade Speeds (SFPM) Blade Wheel Diameter 11-7/ /16 Bed Height 23-1/2 23-1/2 Motor 3/4HP, 115V, 1Ph, 1725 RPM 3/4HP, 220V, 1Ph, 1725 RPM Floor Space Required (in./l x W x H) 50 x 18 x x 18 x 41 Net , , Buy a Wilton Bandsaw and get a 6" Turtle Wax Waxer See page 19 of the 2006 Industrial Catalog, No , for more information. 7" X 12" HORIZONTAL/ VERTICAL BANDSAW W/COOLANT SYSTEM UL listed motor Heavy cast iron bow and bed Hydraulic downfeed for ease of cut Hardened and ground worm gear Roller cabinet with built-in chip tray Automatic shut-off after cut STOCK NO HVBS-7MW Cutting : Round at 90 7 Round at /2 Rectangle at 90 7 x 8-1/2 Rectangle at 45 7 x 5 Throat Depth 7 Vertical Worktable 9-3/8 x 10 Vise Swivels 45 Blade Size 3/4 x.035 x 93 Blade Speeds (SFPM) 80, 130, 180, 285 Blade Wheel Diameter 11-3/4 Bed Height 23 Motor 3/4HP, 115/230V, 1Ph, Prewired 115V Floor Space Required (in./l x W x H) 20-1/2 x 49-1/2 x 38 Net 318 1, See page 8 of the 2006 Industrial Catalog, No , for more information. 8" X 13" HORIZONTAL BANDSAW Heavy-duty, rigid steel and cast iron construction of the head, and base provides full blade support and eliminates vibration and deflection The combination of an oil bath, gear reduction power train, along with precision blade guides and a hydraulic feed system delivers consistent, accurate cuts and longer blade life STOCK NO Cutting : Round at /2 Round at /2 Rectangle at /2 x 13 Rectangle at /2 x 9-3/4 Blade Size 1 x.035 x Blade Speeds (SFPM) 82, 132, 170, 235 Blade Wheel Diameter 12 Bed Height 27-1/2 Motor 1.5HP, 115/230V, 1Ph, Prewired 115V Floor Space Required (in./l x W x H) 62-1/2 x 23 x 48 Net 551 3, , Buy a Wilton Bandsaw and get a 6" Turtle Wax Waxer See page 20 of the 2006 Industrial Catalog, No , for more information. 8" X 14" HORIZONTAL GEAR HEAD BANDSAW Heavy-duty geared head transmission for quick speed changes Easy accessible control panel for operator use Hydraulic feed Portable on wheels Hardened and ground worm gears Miters at STOCK NO HBS-814GH Cutting : Round at 90º 8 Round at 45º 6-1/2 Rectangle at 90º 14 x 8 Rectangle at 45º 6-1/2 x 4-1/2 Vise Swivels 45 Blade Size 3/4 x.035 x 97 Blade Speeds (SFPM) 135, 197, 256 Blade Wheel Diameter 12 Bed Height 26 Motor 1HP, 115/230V, 1Ph, Prewired 115V Floor Space Required (in./l x W X H) 51-1/2 x 18-1/8 x 44 Net 287 1, , See page 9 of the 2006 Industrial Catalog, No , for more information. 26 Effective May 1, 2008 through August 31, 2008

27 bandsaws metalworking 9" X 16" HORIZONTAL BANDSAW Large handwheel and built-in gauge for easy blade tensioning Coolant is distributed through the blade guides Blade guides feature parallel double row ball bearing support Blade brush is built-in and self-propelled STOCK NO HBS-916W Cutting : Round at 90 9 Round at 45 9 Rectangle at 90 9 x 14 Rectangle at 45 9 x 6-1/8 Vise Swivels 45 Blade Size 1 x.035 x 119-1/2 Blade Speeds (SFPM) 82, 132, 170, 235 Blade Wheel Diameter 13 Bed Height 25 Motor 1-1/2HP, 115/230V, 1Ph, Prewired 115V Floor Space Required (in./l x W x H) 65 x 28 x 42 Net 625 4, , Buy a JET Bandsaw and get a 50th Anniversary Panel Truck See page 10 of the 2006 Industrial Catalog, No , for more information. 10" X 14" HORIZONTAL SWIVEL HEAD BANDSAW Unique design features a swivel-head for miter cutting structurals, pipe and tubing Miter head swivels from 90 to 45, while the stock remains in the same position Large, easy to read scale for positioning saw head STOCK NO / MBS-1014W-1/MBS-1014W-3 Cutting : Round at Round at 45 9 Rectangle at x 14 Rectangle at 45 9 x 10 Vise Swivels 45 Blade Size 1 x.035 x 130 Blade Speeds (SFPM) 82, 132, 210, 330 Blade Wheel Diameter 14 Bed Height 25 Motor- MBS-1014W-1 2HP, 230V only, 1Ph Motor- MBS-1014W-3 3HP, 230/460V, 3Ph, Prewired 230V Floor Space Required (in./l x W x H) 26 x 69 x 44 Net 1,067 5, , Buy a JET Bandsaw and get a 50th Anniversary Panel Truck See page 13 of the 2006 Industrial Catalog, No , for more information. 10" X 16" HORIZONTAL BANDSAW Variable speed drive system allows the operator to fine tune the blade speed fast and easily Exclusive 6 contact point blade guide assemblies Exculsive swivel control panel One piece wheel cover STOCK NO Cutting : Round Square 10 x x x 10 Rectangle 9 x 16 9 x 16 9 x 16 Blade Size 1 x.035 x x.035 x x.035 x 135 Blade Wheel Speeds (SFPM) Blade Wheels Height of Work Table 23-1/2 23-1/2 23-1/2 Coolant Tank (gal) Motor 1-1/2HP, 115V, 1Ph 2HP, 220V, 3Ph 2HP, 440V, 3Ph , , , , , , Buy a Wilton Bandsaw and get a 10" Turtle Wax Waxer See page 21 of the 2006 Industrial Catalog, No , for more information. 10" X 18" HORIZONTAL BANDSAW Large handwheel and built-in gauge for easy blade tensioning Coolant is distributed through the blade guides Blade guides feature parallel double row ball bearing support Blade brush is built-in and self-propelled STOCK NO HBS-1018W Cutting : Round at Round at Rectangle at x 15 Rectangle at x 7-1/4 Vise Swivels 45 Blade Size 1 x.035 x 130-1/2 Blade Speeds (SFPM) 82, 132, 210, 330 Blade Wheel Diameter 14 Bed Height 25 Motor 2HP, 230V only, 1Ph Floor Space Required (in./l x W x H) 70 x 31 x 44 Net 776 4, , Buy a JET Bandsaw and get a 50th Anniversary Panel Truck See page 11 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 27

28 10" X 16" MITER BANDSAW Variable speed drive system allows the operator to fine-tune the blade speed fast and easily Exclusive six contact point blade adjustable guide assemblies Mitering Head the workpiece remains fixed while the head swivels to cut any angle 0-45 Heavy duty transmission utilizes hardened and ground gears operating in an oil bath 13" X 21" SEMI-AUTOMATIC HORIZONTAL BANDSAW Semi-automatic bow raises after cut is complete to predetermined height Fully adjustable hydraulic downfeed controls the rate of descent STOCK NO STOCK NO. 7020M 7020M 7040M 7040M-4 Cutting : x x x 10 9 x 16 9 x 16 9 x 16 Blade Size 1 x.035 x x.035 x x.035 x 135 Blade Wheel Speeds (SFPM) Coolant Tank (gal) Motor 1-1/2HP, 115/230V, 1Ph 2HP, 220V, 3Ph 2HP, 440V, 3Ph , , , , , , Buy a Wilton Bandsaw and get a 10" Turtle Wax Waxer See page 22 of the 2006 Industrial Catalog, No , for more information HBS-1321W Cutting : Round at Round at Rectangle at x 21 Rectangle at x 15-1/2 Blade Size 1-1/4 x.042 x 161-1/2 Blade Speeds (SFPM) 66 to 264 Blade Wheel Diameter 18 Bed Height 32 Motor 3HP, 230/460V, 3Ph, Prewired 230V Coolant Motor 1/6HP Floor Space Required (in./l x W x H) 84 x 32-1/2 Net 1,276 9, , Buy a JET Bandsaw and get a 50th Anniversary Panel Truck See page 12 of the 2006 Industrial Catalog, No , for more information. 7" AND 8-3/4" ZIP MITER BANDSAW Adjustable hydraulic feed system Eccentric shaft, ball bearings Heavy-duty cast iron saw head and sturdy base Mitering capability to 60 Convenient control panel STOCK NO " METAL/WOOD BANDSAW Features a rigid one-piece welded stand which requires no assembly Totally enclosed and fan-cooled motor for long life Completely prewired, featuring a unique quick connect motor-to-switch plug for easy setup Micro-adjustable lower blade guide V-groove blade guide bar for consistent alignment STOCK NO K s Cutting : Round at /4 Round at /2 6-1/4 Round at /4 3-1/2 Rectangle at /8 x 6 9-3/8 x 6-1/4 Rectangle at /8 x 4-5/16 6-1/8 x 4-1/2 Rectangle at /4 x 2-3/4 3-1/2 x 3-7/8 Blade Size 3/4 x.035 x 82 3/4 x.035 x 93 Blade Speeds (SFPM) 137, x.035 x 96-1/2 Blade Wheel Diameter 10-1/2 11-5/8 Bed Height 35-7/8 38-7/16 Motor 1HP, 230V, 3Ph 1-1/2HP, 230V, 3Ph Floor Space Required (in./l x W x H) 48 x 22 x 29-1/2 55-1/8 x 22 x 29-1/2 Net , , , , Buy a Wilton Bandsaw and get a 6-piece Combination Wrench Set See page 21 of the 2006 Industrial Catalog, No , for more information K JWBS-14MW Cutting (H/in.) 6 Cutting (W/in.) 13-1/2 Min Saw Blade (W/in.) 1/8 Max Saw Blade (W/in.) 3/4 Saw Blade Length 93-1/2 Table Size 15x15 Table Tilt (deg.) 45 R, 10 L Stand Type Closed Table Height From Floor 43-1/2 Blade Speed (SPFM) - Motor (TEFC) 1 HP, 1 Ph, 115/230V, Prewired 115V Net (lbs) Buy a JET Bandsaw and get a 50th Anniversary Panel Truck 28 Effective May 1, 2008 through August 31, 2008

29 bandsaws metalworking 14" WOOD/METAL VERTICAL BANDSAW Cast iron frame Solid, one-piece steel base for extra stability Conveniently located on/off switch Variable speed drive system (8201VS & 8203VS) Exclusive gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal and plastic cutting applications 14", 16", 20" AND 36" VERTICAL BANDSAW Specially designed for shop or production use, including the cutting of ferrous type materials Heavy-duty, completely enclosed steel frame Welders included STOCK NO Cutting : VBS-1408 VBS-1610 VBS-2012 Height Throat /2 20 Blade Speeds (SFPM) Low 82 to 330; High 985 to 3950 Low , High 390 3,280 Table Size 20 x x x 22-1/2 Table Tilt 8 F & B, 12 L & 15 R 8 F & B, 12 L & 15 R 8 F & B, 15 R & 12 L Table Height at /2 Welder (KVA) /64 Motor 1HP, 115/230V, 1Ph, Prewired 115V 2HP, 230/460V, 3Ph, Prewired 230V 2HP, 230/460V, 3Ph, Prewired 230V Net ,210 4, , , , , , Buy a JET Bandsaw and get a 50th Anniversary Panel Truck See page of the 2006 Industrial Catalog, No , for more information s 8201K 8203K 8201VS 8203VS Cutting Capacities: Under Guide Under Guide with Riser Block From Blade to Frame 13-1/2 13-1/2 13-1/2 13-1/2 Blade Size 3/8 x.025 x 92-1/2 3/8 x.025 x 92-1/2 3/8 x.025 x 92-1/2 3/8 x.025 x 92-1/2 Cutting Speeds Wood (SFPM) Cutting Speeds Metal (SFPM) 39, 57, 78, 107, 142, 196, , 57, 78, 107, 142, 196, Variable Speed Variable Speed Table Tilt to Right Table Tilt to Left Height from Floor Miter Gauge Groove Wide x Deep 3/4 x 3/8 3/4 x 3/8 3/4 x 3/8 3/4 x 3/8 Motor STOCK NO. 8201K 1HP,115V,1Ph, 1725 RPM 1HP,230/460V, 3Ph, 1725 RPM, Prewired 230V 1HP,115V, 1Ph, 1725 RPM 1HP,230/460V, 3Ph, 1725 RPM, Prewired 230V Floor Space Required (in./l x W x H) 20 x 16 x x 16 x x 16 x x 16 x 68 Net , , , , , , , , See page 24 of the 2006 Industrial Catalog, No , for more information. VERTICAL SELF-FEED BANDSAW Designed for multiple uses cutting both ferrous and nonferrous metals Welded frame and base of heavy gauge steel Swivel vise for mitering Heavy-duty cast iron table Four blade speeds 70, 140, 280, 580 SFPM Hydraulic feed control STOCK NO / VSF-14-1/VSF-14-3 Cutting : Height (max./in.) 14-1/2 Throat (max./in.) 8-1/2 Blade Size 120 Blade Width (min.-max./in.) 1/8-1 Blade Speeds (SFPM) 70, 140, 280, 580 Blade Wheel Diameter 14 Table Size 30-1/2 x 18-1/2 Table Height at Motor- VSF HP, 115/230V, 1Ph, Prewired 115V Motor- VSF HP, 230/460V, 3Ph, Prewired 230V Floor Space Required (in./l x W x H) 40 x 30-1/2 x 69 Net 551 2, , Buy a JET Bandsaw and get a 50th Anniversary Panel Truck See page 14 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 29

30 9" X 20" BELT DRIVE BENCH LATHES CABINET STAND F R E E With the purchase of 9 x 20 JET Lathe 13" X 40" BELT DRIVE BENCH LATHE CABINET STAND With the purchase of A INCLUDES: 3-Jaw & 4-Jaw Chucks, Steady Rest, Follow Rest, 4-Way Tool Post and Face Plate Shown with Optional stand Shown with stand Spindle supported by precision tapered roller bearings Hardened and ground bedways Power longitudinal feed allows threading Standard 1-1/2" x 8 TPI spindle mount allows for many aftermarket accessories Reversing switch included for added versatility Backlash adjustments provided throughout the carriage Tailstock is adjustable for taper cuts Quick-change gear box provides wide range of inch and metric threads STOCK NO BD-920W Swing Over Bed 8-3/4 Swing Over Cross Slide 5-1/4 Distance Between Centers 20 Spindle Bore 25/32 Spindle Mount (in. x TPI) 1-1/2 x 8 Spindle Taper MT-3 Spindle Speeds 6 Spindle Speed Range (RPM) 130-2,000 Longitudinal Feeds 27 Longitudinal Feed Range (in./rev.) Inch Threads 27 Inch Thread Range (TPI) 8-56 Motor 3/4HP, 1Ph, 115V only Net 235 1, , BD-920 Lathe Package and Accessory K Buy a BD-920W Lathe and get a S-920N Stand One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature Enclosed gearbox design provides smooth, quiet operation Fast, easy speed changes Low voltage motor controls Helical cut headstock gears reduce noise Change gears allow metric threading Spindle is supported by precision tapered roller bearings V-way bed is induction hardened and ground Gap bed section provided for large diameter work Independent leadscrew and feed rod T-slotted compound slide with four-way tool post STOCK NO A A BDB-1340A Swing over Bed 13 Swing over Cross Slide 7-25/32 Swing over Gap 18-3/4 Length of Gap 8 Distance between Centers 40 Spindle Bore 1-3/8 Spindle Mount D1-4 Spindle Taper (with sleeve) MT-5 (MT-3) of Spindle Speeds 12 Range of Spindle Speeds (RPM) 60-1,240 Motor 2HP, 230V, 1Ph Net 954 3, , Lathe Packages and Accessories BDB-1340A Lathe with ACU-RITE VUE DRO Installed 5, , BDB-1340A Lathe with Taper attachment installed 5, , A Lathe Package and Accessory AK CBS-1340 Cabinet stand for A & A Buy a JET Bench Lathe and get a Cabinet Stand for only 250 Buy a JET Lathe and get a 50th Anniversary Panel Truck Buy a JET Lathe and get a 50th Anniversary Panel Truck See page of the 2006 Industrial Catalog, No , for more information. 30 Effective May 1, 2008 through August 31, 2008

31 lathes metalworking 13" X 40" AND 14" X 40" GEARED HEAD BENCH LATHE NEW CABINET STAND With the purchase of A or A INCLUDES: 3 Jaw & 4 Jaw Chucks, Steady Rest, Follow Rest, 4 Way Tool Post, Face Plate and Splash Guard Shown with Optional stand STOCK NO A One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature Enclosed gearbox design provides smooth, quiet operation Fast, easy speed changes Hardened and ground gears are featured in the headstock and gearbox D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings Headstock is constantly oiled during operation Gear box gives wide inch threading and feed capabilities with no gear changes V-way bed design is induction hardened and ground Tolerance test certificate included See page 41 of the 2006 Industrial Catalog, No , for more information A A GHB-1340A GHB-1440A Swing Over Bed Swing Over Cross Slide 7-25/ /32 Swing Through Gap 18-3/4 19-3/4 Length of Gap 8 8 Distance Between Centers Spindle Bore 1-3/8 1-3/8 Spindle Mount D1-4 D1-4 Spindle Taper (With Sleeve) MT-5 (MT-3) MT-5 (MT-3) Motor 2HP, 230V, 1Ph 2HP, 230V, 1Ph Net 1,015 1,015 4, , , , NEW GHB-1340A Lathe Packages GHB-1340A Lathe with collet closer 5, , GHB-1340A Taper attachment installed 5, , GHB-1340A Lathe with ACU-RITE VUE DRO Installed 6, , GHB-1340A Lathe with Collet Closer & Tak 6, , GHB-1440A Lathe Packages GHB-1440A Lathe with ACU-RITE VUE DRO Installed 6, , A Lathe Package and Accessory AK CBS-1340 Cabinet stand for A & A Buy a JET Bench Lathe and get a Cabinet Stand for only 250 Buy a JET Lathe and get a 50th Anniversary Panel Truck jettools.com wiltontool.com 31

32 13" X 40" AND 14" X 40" GEARED HEAD ENGINE LATHE Uniquely designed exclusively by JET Hardened and ground gears are featured in the headstock and gearbox D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings Headstock is constantly oiled during operation Splined, not keyed, shafts are utilized in the headstock Gearbox gives large threading and feed capabilities with no gear changes V-way bed design is induction hardened and ground STOCK NO INCLUDES: 3-Jaw & 4-Jaw Chucks, Face Plate, 4-way Tool Rest, Follow Rest, Steady Rest, Full Length Splash Guard, Work Lamp, Foot Brake and Micro Carriage Stop GH-1340W-1 GH-1340W-3 GH-1440W-1 GH-1440W-3 Swing Over Bed Swing Over Cross Slide 7-1/2 7-1/2 8-1/2 8-1/2 Swing Through Gap Distance Between Centers Spindle Bore 1-1/2 1-1/2 1-1/2 1-1/2 Spindle Mount D1-4 D1-4 D1-4 D1-4 Spindle Taper (With Sleeve) MT-5 (MT-3) MT-5 (MT-3) MT-5 (MT-3) MT-5 (MT-3) of Spindle Speeds Range of Spindle Speeds (RPM) 40 1, , , ,800 of Longitudinal and Cross Feeds Range of Longitudinal Feeds (in./rev.) Range of Crossfeeds (in./rev.) of Inch Threads Range of Inch Threads 4 112TPI 4 112TPI 4 112TPI 4 112TPI of Metric Threads Range of Metric Threads (mm) Maximum Tool Size 5/8 x 5/8 5/8 x 5/8 5 /8 x 5/8 5/8 x 5/8 Maximum Compound Slide Travel 3-1/2 3-1/2 3-1/2 3-1/2 Maximum Cross Slide Travel 6-3/8 6-3/8 6-3/8 6-3/8 Maximum Carriage Travel 37-1/2 37-1/2 37-1/2 37-1/2 Tailstock Spindle Travel 4-3/4 4-3/4 4-3/4 4-3/4 Taper in Tailstock Spindle MT-3 MT-3 MT-3 MT-3 Steady Rest 3-3/4 3-3/4 3-3/4 3-3/4 Follow Rest 2-3/4 2-3/4 2-3/4 2-3/4 Width of Bed 10-1/2 10-1/2 10-1/2 10-1/2 Motor 3HP, 230V,1Ph 3HP, 230 /460V, 3Ph, Prewired 230V 3HP, 230V, 1Ph 3HP, 230V/460V, 3Ph, Prewired 230V Overall Dimensions (in./l x W x H) 73-3/4 x 29-1/2 x 47-1/2 73-3/4 x 29-1/2 x 47-1/2 73-3/4 x 29-1/2 x 47-1/2 73-3/4 x 29-1/2 x 47-1/2 Net , , , , , , , , See page of the 2006 Industrial Catalog, No , for more information. 32 Effective May 1, 2008 through August 31, 2008

33 lathes metalworking GH-1340W & GH-1440W SERIES LATHES PACKAGES GH-1340W-1 Lathe Packages GH-1340W-1 with ACU-RITE VUE DRO 8, , GH-1340W-1 with 411DRO TAK & Collet Closer 11, , GH-1340W-1 with VUE DRO & Collet Closer 10, , GH-1340W-1 with VUE DRO and Taper Attachment 10, , GH-1340W-1 Lathe with Collet Closer 8, , GH-1340W-1 Lathe with 200S DRO & Collet Closer 11, , GH-1340W-1-TAK, Lathe with Taper Attachment Installed 8, , GH-1340W-1 Lathe with ACU-RITE 200S DRO Installed 9, , GH-1340W-1 Lathe with ACU-RITE 200S DRO, Taper Attachment and Collet Closer Installed 12, , GH-1340W-1 with ACU-RITE 200S and Tak 10, , GH-1340W-1 Lathe with NEWALL C80 DRO Installed 9, , GH-1340W-1 Lathe with C80 DRO and Collet Closer 10, , GH-1340W-1 with C80 DRO & Taper Attachment 10, , PIECE TOOLING KIT FOR ZX LATHES Kit Includes Three double ended boring bars Parting tool holder Adjustable turning tool holder Revolving knurling tool with three pairs of knurls Half dead center Carbide tipped dead center Heavy-duty live center Cut off tool Eight HSS tool bits Four hex key wrenches Works with all ZX Series Lathes STOCK NO drill sleeves hss tool boring bars carbide dead center half dead center HSS KNURLING TOOL HOLDER GH-1340W-3 Lathe Packages GH-1340W-3 with ACU-RITE VUE DRO 8, , GH-1340W-3-TAK, Lathe with Taper Attachment Installed 8, , GH-1340W-3 Lathe with ACU-RITE 200S DRO Installed 9, , GH-1340W-3 Lathe with ACU-RITE 200S DRO, Taper Attachment and Collet Closer Installed 12, , GH-1340W-3 Lathe with NEWALL C80 DRO Installed 9, , GH-1340W-3 Lathe with Collet Closer Installed 9, , GH-1340W-3 Lathe with NEWALL C80 DRO and Taper Attachment 11, , GH-1340W-3 Lathe with ACU-RITE 200S DRO and Collet Closer 11, , GH-1340W-3 Lathe with ACU-RITE 200S DRO and Taper Attachment 11, , GH-1340W-3 C80 DRO and Collet Closer 10, , GH-1340W-3 with Taper Attachment and Collet Closer 9, , GH-1440W-W1 Lathe Packages GH-1440W-1 with ACU-RITE VUE DRO 9, , GH-1440W-1-TAK, Lathe with Taper Attachment Installed 9, , GH-1440W-1 Lathe with Collet Closer Installed 9, , GH-1440W-1 Lathe with ACU-RITE 200S DRO and Collet Closer Installed 11, , GH-1440W-1 with Tak & Collet Closer 10, , GH-1440W-1 Lathe with ACU-RITE 200S DRO Installed 10, , GH-1440W-1 Lathe with ACU-RITE 200S DRO and Taper Attachment Installed 11, , GH-1440W-1 Lathe with ACU-RITE 200S DRO, Collet Closer & Taper Attachment Installed 12, , GH-1440W-1 Lathe with NEWALL C80 DRO 10, , GH-1440W-1 Lathe with NEWALL DRO and Collet Closer 11, , GH-1440W-3 Lathe Packages GH-1440W-3 with ACU-RITE VUE DRO 9, , GH-1440W-3 with Collet Closer 9, , GH-1440W-3-TAK Lathe with Taper Attachment Installed 8, , GH-1440W-3 Lathe with ACU-RITE 200S DRO Installed 10, , GH-1440W-3 Lathe with ACU-RITE 200S Taper Attachment 11, , GH-1440W-3 Lathe with NEWALL C80 DRO Installed 10, , GH-1440W-3 Lathe with 200S, Tapper Attachment and Collet Closer 13, , GH-1440W-3 Lathe with C80 DRO and Taper Attachment 11, , GH-1440W-3 Lathe with C80 DRO and Collet Closer 11, , GH-1440W-3 Lathe with ACU-RITE 200S DRO and Collet Closer 11, , Buy a JET Lathe and get a 50th Anniversary Panel Truck 22-PIECE TOOLING KIT FOR 13" AND 14"W SERIES AND BENCH SERIES LATHES Kit Includes Three double ended boring bars Parting tool holder Adjustable turning tool holder Revolving knurling tool with three pairs of knurls Half dead center Carbide tipped dead center Heavy-duty live center Cut off tool Eight HSS tool bits Four hex key wrenches Works with 13" and 14" W Series and Bench Series Lathes STOCK NO parting tool holder live center live center HSS KNURLING TOOL HOLDER carbide dead center adjustable turning TOOL HOLDER parting tool holder adjustable turning TOOL HOLDER half dead center hss tool bit boring bars See page of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 33

34 14", 16", 18", AND 22" ZX SERIES LARGE SPINDLE BORE LATHES Uniquely designed exclusively by JET ISO 9001 certified manufacturer 3-1/8" bore spindle is supported by two tapered and one ball bearing Chrome molybdenum headstock gears are hardened, ground, and shaved Universal gearbox allows inch, metric, diametral, and module pitch threads, no change gears required Carriage features one-shot lubrication and TurciteB on bed sliding surfaces T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts Includes 3-jaw and 4-jaw chucks, steady rest, follow rest, 4-way tool post, face plate, coolant system with splash guard, foot brake, work lamp Five position auto carriage stop STOCK NO INCLUDES: 3 Jaw & 4 Jaw Chucks, Face Plate, 4 way Tool Rest, Follow Rest, Steady Rest, Full Length Splash Guard, Work Lamp, Foot Brake and Micro Carriage Stop GH-1440ZX GH-1460ZX GH-1640ZX GH-1660ZX GH-1840ZX GH-1860ZX GH-1880ZX GH-2280ZX Swing Over Bed Swing Over Cross Slide 7-5/8 7-5/ Swing Through Gap 23-5/8 23-5/8 25-7/8 25-7/8 27-1/2 27-1/2 27-1/2 Length of Gap 12-1/4 12-1/4 12-1/4 12-1/4 12-1/4 12-1/4 12-1/4 Distance Between Centers Spindle Bore 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 Spindle Mount D1-8 D1-8 D1-8 D1-8 D1-8 D1-8 D1-8 D1-8 Spindle Taper (With sleeve) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) of Spindle Speeds Range of Spindle Speeds (RPM) 42 to 1, to 1, to 1, to 1, to 1, to 1, to 1, to 1,800 Motor 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 10HP, 230/460V, 3Ph, Prewired 230V Net , , , , , , , , , , , , , , , , See page of the 2006 Industrial Catalog, No , for more information. Buy a JET Lathe and get a 50th Anniversary Panel Truck 34 Effective May 1, 2008 through August 31, 2008

35 lathes metalworking Buy a JET ZX Lathe and get a Acu-Rite 200S or Newall C80 DRO for 700 installed ZX SERIES LARGE SPINDLE BORE LATHES PACKAGES GH-1440ZX Lathe Packages GH-1440ZX-TAK Lathe with Taper Attachment Installed 16, , GH-1440ZX Lathe with 2-axis ACU-RITE DRO 200S Installed 16, , GH-1440ZX with 200S, Collet Closer & Taper Attachment 19, , GH-1440ZX Lathe with ACU-RITE 200S DRO and Taper Attachment Installed 18, , GH1440ZX Lathe with ACU-RITE 200T DRO and Collet Closer Installed 18, , GH1440ZX Lathe with Collet Closer Installed 15, , GH-1440ZX Lathe with C80 DRO & Taper Attach 18, , GH-1440ZX Lathe with NEWALL C80 DRO Installed 16, , GH-1440ZX Lathe with NEWALL C80 DRO and Collet Closer 18, , GH-1440ZX Lathe with NEwall C80-DRO 2 AX With Tak and Collet Closer 19, , GH-1460ZX Lathe Packages GH-1460ZX TAK Lathe with Taper Attachment Installed 17, , GH-1460ZX Lathe with 2-axis ACU-RITE DRO 200S Installed 17, , GH-1460ZX Lathe with ACU-RITE 200S DRO and Taper Attachment Installed 20, , GH-1460ZX Lathe with ACU-RITE 200S DRO, Taper Attachment and Collet Closer Installed 22, , GH-1460ZX Lathe with NEWALL C80 DRO Installed 17, , GH-1460ZX Lathe with 200S DRO and Collet Closer 19, , GH-1640ZX Lathe Packages GH-1640ZX Lathe with NEWALL C80 with Collet Closer 20, , GH-1640ZX Lathe with Collet Closer 17, , GH-1640ZX TAK Lathe with Taper Attachment Installed 18, , GH-1640ZX Lathe with 2-axis ACU-RITE DRO 200S Installed 17, , GH-1640ZX Lathe with ACU-RITE 200S DRO and Taper Attachment Installed 20, , GH-1640ZX Lathe with ACU-RITE 200S Collet Closer 19, , GH-1640ZX Lathe with NEWALL C80 DRO Installed 18, , GH-1640ZX with Newall C80 DRO and Tak 19, , GH-1640ZX Lathe with C80 DRO, Tak and Collet Closer 20, , Newall C80 DRO Acu-Rite 200S GH-1660ZX Lathe Packages GH-1660ZX Lathe with with Collet Closer 16, , GH-1660ZX Lathe with C80 with Collet Closer and Taper 22, , GH-1660ZX Lathe with Taper Attachment 18, , GH-1660ZX Lathe with Taper Attachment and Collet Closer 20, , GH-1660ZX Lathe with 2-axis Acu-Rite DRO 200T 18, , GH-1660ZX Lathe with Acu-Rite 2-axis 21, , GH-1660ZX Lathe with 2-axis Acu-Rite 200S and Collet Closer Installed 21, , GH-1660ZX Lathe with Acu-Rite 200S, Taper Attachment and Collet Closer Installed 21, , GH-1660ZX Lathe with Newall C80 DRO 19, , GH-1660ZX Lathe with Newall C80 DRO and Taper Attachment 21, , GH-1660ZX Lathe with Newall C80 DRO and Collet Closer 21, , GH-1840ZX Lathe Packages GH-1840ZX-TAK Lathe with Taper Attachment 19, , GH-1840ZX Lathe with 2-axis Acu-Rite DRO 200T 19, , GH-1840ZX Lathe with 2-axis Acu-Rite DRO 200S and Collet Closer Installed 21, , GH-1840ZX Lathe with 2-axis Acu-Rite DRO 200S and Taper Attachment and Collet Closer Installed 23, , GH-1840ZX Lathe with 2-axis Acu-Rite DRO 200T and Taper Attachment 21, , GH-1840ZX Lathe with 2-axis Newall C80 DRO Installed 19, , GH-1860ZX Lathe Packages GH-1860ZX Lathe with C80 DRO and Taper Attachment 23, , GH-1860ZX Lathe with Taper Attachment 20, , GH-1860ZX Lathe with 2-axis Acu-Rite DRO 200T 20, , GH-1860ZX Lathe with 2-axis Acu-Rite DRO 200T and Taper Attachment 23, , GH-1860ZX Lathe with 2-axis Acu-Rite DRO 200S DRO, and Collet Closer Installed 22, , GH-1860ZX Lathe with 2-axis Acu-Rite 200T DRO Taper Attachment and Collet Closer 24, , GH-1860ZX Lathe with 2-axis Newall C80 DRO 20, , GH-1880ZX Lathe Packages GH-1880ZX Lathe with Taper Attachment 22, , GH-1880ZX Lathe with 2-axis Acu-Rite DRO 200T 23, , GH-1880ZX Lathe with 2-axis Newall C80 DRO Installed 23, , GH-1880ZX Lathe with 2-axis Acu-Rite DRO 200T and Taper Attachment 25, , GH-1880ZX Lathe with 2-axis Acu-Rite DRO 200S and Collet Closer Installed 24, , GH-1880ZX Lathe with 2-axis Acu-Rite DRO 200S and Collet Closer and Taper Attachment Installed 27, , GH-2280ZX Lathe Packages GH-2280ZX with Collet Closer 23, , GH-2280ZX Lathe with Taper Attachment 24, , GH-2280ZX Lathe with Taper Attachment and Collet Closer 25, , GH-2280ZX Lathe with 2-axis Acu-Rite 200S DRO 26, , GH-2280ZX Lathe with 2-axis Newall C80 DRO 26, , GH-2280ZX Lathe with 2-axis Acu-Rite 200S DRO and Taper Attachment 27, , GH-2280ZX Lathe with 2-axis Acu-Rite 200S DRO and Collet Closer 26, , GH-2280ZX Lathe with C80 DRO and Taper Attachment 25, , GH-2280ZX Lathe with 2-axis Acu-Rite 200S DRO and Collet Closer and Taper Attachment 29, , jettools.com wiltontool.com 35

36 JTM-1 & JTM-2 VERTICAL MILLING MACHINES The JET Step Pulley milling machine is the perfect solution for maintenance shops, repair shops, job shops, schools and light production. Meehanite casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Spindle head is internally cooled Satin chrome finished dials Heavy-duty splined motor drive One-piece quill pinion and shaft Three-stage power downfeed with automatic stop Heavyduty spindle brake Mill Packages with ANILAM WIZARD 411 DRO and X-Axis Powerfeed Included Buy a JET Mill and Get a Anilam Wizard 411 DRO and X-Powerfeed installed! 3HP or 5HP, 3Ph motor Variable speed head Meehanite casting One-shot lubrication system Way Covers Draw Bar Tool box with tools DRO INCLUDED STOCK NO JTM-1 JTM-2 Table Size 9 x 42 9 x 42 Spindle Taper R-8 R-8 Diameter of Quill 3-3/8 3-3/8 of Spindle Speeds 16 8 Range of Spindle Speeds (RPM) Downfeeds of Spindle (per/rev./in.) Spindle Travel 5 5 Head Movement 90 R & L 45 F & B 90 R & L 45 F & B Distance Spindle to Table (max./in.) 17-1/2 17-1/2 Distance Spindle to Column (min./in.) 4-1/2 4-1/2 Distance Spindle to Column (max./in.) Longitudinal Table Travel (X-axis) 23-7/8 23-7/8 Cross Travel (Y-axis) 12-1/2 12-1/2 Collet 1/8-7/8 1/8-7/8 T-slots, & Size 3 and 5/8 3 and 5/8 Motor 2HP, 230V, 3Ph 2HP, 115/230V, 1Ph, Prewired 230V Overall Dimensions (in./w x D x H) 57 x 64 x x 64 x 82 Net 2,200 2,200 6, , , , JTM-1 Milling Machine Packages JTM-1 Mill with X Powerfeed Installed 7, , JTM-1 Mill with X & Y Powerfeed Installed 8, , JTM-1 Mill with Anilam 411 DRO and X Powerfeed 9, , STOCK NO JTM-4VS Milling Machine DRO and Accessory Packages JTM-4VS Mill with Anilam 411 DRO and X Powerfeed 7, JTM-4VS-1 Mill with Anilam 411 DRO and X Powerfeed 7, JTM-1050 Milling Machine DRO and Accessory Packages JTM-1050 W/411 DRO & X-AXIS TPFA 9, POWERFEED INCLUDED JTM-2 Milling Machine Packages JTM-2 Mill JTM-1 Mill with with Anilam 411 DRO and X Powerfeed 9, , JTM-1050EVS Milling Machine DRO and Accessory Packages JTM-1050EVS/230 W/411 DRO & X-AXIS TPFA 11, JTM-1050EVS/460 W/411 DRO & X-AXIS TPFA 11, Buy a JET Mill and get a 50th Anniversary Panel Truck Buy a JET Mill and get a 50th Anniversary Panel Truck See page 62 of the 2006 Industrial Catalog, No , for more information. See page 62 of the 2006 Industrial Catalog, No , for more information. 36 Effective May 1, 2008 through August 31, 2008

37 mills metalworking Mill Packages with ANILAM WIZARD 411 DRO and X-Axis Powerfeed Included Mill Packages with ACURITE 200S-S AXIS DRO and X-Axis Powerfeed Included Buy a JET Mill and Get a Anilam Wizard 411 DRO and X-Powerfeed installed! Upgrade to the Acu-Rite 200S at a Great! 10" x 54" table 5HP, 3Ph motor Variable speed head Meehanite casting One-shot lubrication system Way Covers Draw Bar Tool box with tools 3HP or 5HP, 3Ph motor Variable speed head Meehanite casting One-shot lubrication system Way Covers Draw Bar Tool box with tools DRO INCLUDED DRO INCLUDED POWERFEED INCLUDED POWERFEED INCLUDED STOCK NO STOCK NO NEW JTM-1054R Milling Machine DRO and Accessory Packages JTM-1054R, 10" x 54" Table, R8 Taper w/ X Powerfeed & Anilam 411 DRO 12, JTM-4VS Milling Machine DRO and Accessory Packages JTM-4VS Mill Acu-Rite 200S DRO and X Powerfeed 8, JTM-1050 Milling Machine DRO and Accessory Packages JTM-1050 Mill with ACU-RITE 200S DRO and X Powerfeed Installed 10, JTM-1054R Milling Machine DRO and Accessory Packages JTM-1054R, 10" x 54" Table, R8 Taper w/ X Powerfeed & Acu-Rite 200S DRO 13, JTM-1050EVS Milling Machine DRO and Accessory Packages JTM-1050EVS/230 Mill with ACU-RITE 200S DRO and X Powerfeed Installed JTM-1050EVS/460 Mill with ACU-RITE 200S DRO and X Powerfeed Installed 11, , Buy a JET Mill and get a 50th Anniversary Panel Truck Buy a JET Mill and get a 50th Anniversary Panel Truck See page 62 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 37

38 MILLING CHUCK AND COLLET SETS 17-piece set in a wooden case Can quickly change from one shank size to another without loosening the draw bar 15 precision spring collets take the place of 15 individual adaptors Can be used for milling, drilling, reaming and boring operations Complete with spanner wrenches Collets are in increments of 1/16" T.I.R. at 2-3/8" is " STOCK NO Shank Taper CCS-1 3-7/32 2-5/ See page 76 of the 2006 Industrial Catalog, No , for more information. Precision hardened and ground For lathes and tool and cutter grinder applications STOCK NO C AND R8 COLLET SETS Description CS-R8, 6-piece R-8 Collet Set 1/8" 3/4" by 1/8ths for Mills CS-5C, 16-piece 5-C Collet Set 1/8" 1-1/16" by 1/16ths for Lathes and Grinders See page 76 of the 2006 Industrial Catalog, No , for more information. HORIZONTAL/VERTICAL ROTARY TABLES 6" to 16" tables are made of high density Meehanite Hardened and ground worm gear Widely used circular cutting, angle setting, boring and spot facing in the horizontal position STOCK NO Table Size Center Sleeve T-slot Size MT-2 3/ MT-3 1/ MT-3 1/ See page 78 of the 2006 Industrial Catalog, No , for more information. 52-piece set includes: six T-slot nuts, six Flange nuts, four Coupling nuts, six Step blocks, six Step clamps, twenty-four Studs, four each (3", 4", 5", 6", 7", and 8" lengths) STOCK NO CLAMPING KITS Stud Size T-Slot Sizes CK-12 1/2" - 13 T.P.I. 9/16 and 5/ CK-38 3/8" - 16 T.P.I 7/16 and 1/ CK-58 5/8" - 11 T.P.I. 11/16 and 3/ See page 77 of the 2006 Industrial Catalog, No , for more information. 24-PIECE R8 MILLING TOOL KIT Kit Includes 2" boring head with R8 shank 5 HSS boring bars 2-1/2" fly cutter with R8 shank 3/8" HSS tool bit for fly cutter R8 x MT3 adapter 48 x JT6 adapter R8 shank with blank end which can be machined for special uses 3-Piece edge finder set Wiggler set Three hex key wrenches for all tool holders No works with R8-Spindle milling machines MILLING ACCESSORY KIT KT Kit Includes 6pc. R8 Collet Se 52pcs Clamping Kit 24pcs Tooling Kit* 6" Verti-Lock Machine Vise STOCK NO KT NEW STOCK NO *See kit for details 38 Effective May 1, 2008 through August 31, 2008

39 drills metalworking MILLING/DRILLING MACHINES One-piece cast iron column for added support Belt cover quick slide latch allows faster belt adjustment to change spindle speeds Base taper allows for easier clean-up 15" 6-SPEED DRILL PRESSES Substantially constructed to provide a solid base for drilling Offers a greater range in spindle speeds than others in this class Larger quill provides greater accuracy STOCK NO Shown with optional stand STOCK NO. A3836 Drilling Cap y Face Mill Cap y End Mill Cap y JMD /2 1/ JMD /4 3 3/ JMD- 18PFN 1-1/4 3 3/4 Motor (UL ed) 1HP, 1Ph, 115/230V Prewired 115V 2HP, 1Ph, 230V Only 2HP, 1Ph, 230V Only 1, , , , , , A3836 A3816 Type 15" Bench 15" Floor Cast Iron Drilling 5/8 5/8 Steel Drilling 1/2 1/2 Column Diameter 3 3 Motor 1HP, 115/230V, 1Ph 1HP, 115/230V, 1Ph 1, , , , Buy a Wilton Drill Press and get a 77-piece Flex Handle Socket & Wrench Set See page 93 of the 2006 Industrial Catalog, No , for more information. Mill/Drill Machine Packages & Accessory JMD-18 with Anilam 411 DRO Installed 3, , JMD-18PFN Mill Drill with Anilam 411 DRO 4, , CS-18, Stand for & with purchase of JET Mill Drill See page 77 of the 2006 Industrial Catalog, No , for more information. 15" VARIABLE SPEED DRILL PRESSES Speeds from 400 to 5,000 RPM Handwheel adjustment sets the speeds Large 2-1/4" quill allows greater accuracy 15" & 20" HORIZONTAL DRILL PRESSES Cast iron head Large quill allows greater accuracy Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings mounted in an enclosed quill for extended life Massive T-slotted production work table ( 2550 only) STOCK NO STOCK NO. A5838 A5816 A5818 A5836 A5838 Type 15" Floor 15" Floor 15" Bench 15" Bench Cast Iron Drilling (max./in.) 5/8 5/8 5/8 5/8 Steel Drilling (max./in.) 1/2 1/2 1/2 1/2 Column Diameter Motor 1 HP, 115/220V, 1Ph 1HP, 220/440V, 3Ph 1 HP, 115/220V, 1Ph 1HP, 220/440V, 3Ph 2, , , , , , , , Buy a Wilton Drill Press and get a 77-piece Flex Handle Socket & Wrench Set See page 94 of the 2006 Industrial Catalog, No , for more information Type 15" Bench 15" Floor 20" Floor Drills to Center of Circle Cast Iron Drilling (max./in.) 5/8 5/8 3/4 Steel Drilling (max./in.) 1/2 1/2 5/8 Quill Diameter 1-7/8 1-7/8 2-1/4 Quill Travel 3-3/8 3-3/8 4-3/4 Spindle Taper 2 MT 2 MT 3 MT & Range of Spindle Speeds (RPM) 12 (250, 340, 390, 510, 600, 650, 990, 1550, 1620, 1900, 2620, 3100) 12 (250, 340, 390, 510, 600, 650, 990, 1550, 1620, 1900, 2620, 3100) 12 (150,260,300,440, 490,540,1150,1550,1840, 2220,2950,4200) Overall Table Size 10 x x /2 x 16-1/2 Table Working Surface 10 x x x 16 Column Diameter 2-7/8 2-7/8 3-5/8 Base Size 11 x 18-1/2 11 x 19-1/2 22-3/4 x 17-3/4 Spindle to Base 24-1/2 48-3/4 43-1/2 3/4HP, 115V, 1Ph, 1725 RPM 3/4HP, 115V, 1Ph, 1725 RPM 1-1/2HP, 115V, 1Ph, 1725 RPM Motor Floor Space Required (in./l x W x H) 26 x 13-3/8 x x 13-3/8 x 63-1/2 34 x 21 x 67 Net , See page 92 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 39

40 ELECTRONIC VARIABLE SPEED DRILL PRESS Runs quieter and smoother than a conventional variable speed head 230V model can run on single phase power Low maintenance head has less moving parts STOCK NO JDP-20EVS/230 JDP-20EVS/460 Drills to Center of Circle Cast Iron Drilling 1-1/2 1-1/2 Steel Drilling 1-3/8 1-3/8 Steel Tapping 3/4 3/4 Column Diameter 4-1/2 4-1/2 Spindle Taper MT-3 MT-3 Spindle Travel 6 6 of Spindle Speeds Variable Variable Range of Spindle Speeds (RPM) Table Size 22 x 18-3/4 22 x 18-3/4 T-slot ( & Size) 2 & 5/8 2 & 5/8 Main Motor 2HP, 230V, 3Ph 2HP, 460V, 3Ph Coolant Motor 1/8HP, 3Ph 1/8HP, 3Ph Floor Space Required (in./l x W x H) 37 x 37 x 82-1/4 37 x 37 x 82-1/4 Net , , , , Buy a JET Machine and get a 50th Anniversary Panel Truck See page 84 of the 2006 Industrial Catalog, No , for more information. VARIABLE SPEED DRILL PRESSES Variable spindle speeds from 300 to 2000 RPM External #3 Morse Taper Front mounted positive control depth stop 20" STEP PULLEY DRILL PRESS Hinged metal belt and pulley cover coupled with quick adjustment motor mount allow rapid changing of spindle speeds Rotating, 45 tilting, crank-operated worktable with quick release clamp On/off switch located on front of the drill press head A 1/2" diameter external positive depth stop with three nut locking features for quick adjustment STOCK NO Drills to Center of Circle Drilling Chuck Size Motor JPD-20MF 20-1/2 1 3/4 1-1/2HP, 1Ph 1, See page 82 of the 2006 Industrial Catalog, No , for more information. 20" GEARED HEAD DRILLING & TAPPING PRESS Heavy-duty design allows a variety of precision drilling and tapping applications Easy to read internal depth gauge Three power down feeds (GHD-20PFT) Calibrated fine down feed built-in Built-in spindle lock STOCK NO STOCK NO. 221VS 2221VS 2223VS Drills to Center of Circle Cast Iron Drilling 1-1/4 1-1/4 Steel Drilling 1 1 Column Diameter 4-1/2 4-1/2 Range of Spindle Speeds (RPM) 300 to to 2000 Spindle Travel 6 6 Spindle Taper 3 MT 3 MT Quill Diameter 3 3 Table Size 18-1/8 x 14-3/4 18-1/8 x 14-3/4 T-Slots & Size 2 & 5/8 2 & 5/8 Table Travel 32-3/8 32-3/8 Base Working Surface 15-1/4 x 12-1/ /4 x 12-1/16 Base Slots & Size 2 & 5/8 2 & 5/8 Motor 2HP, 115/220V, 1Ph 2HP, 220/440V, 3Ph Floor Space Required (in./l x W x H) 34-1/4 x 27 x 77-1/4 34-1/4 x 27 x 77-1/4 Net , , , , Buy a Wilton Drill Press and get a 26-piece Socket Wrench Set 1/2" Drive See page 95 of the 2006 Industrial Catalog, No , for more information GHD-20T GHD-20PFT Drills to Center of Circle Cast Iron Drilling 1-1/2 1-1/2 Cast Iron Tapping 13/16 13/16 Steel Drilling 1-1/4 1-1/4 Column Diameter 4-1/2 4-1/2 Distance Spindle to Column (max./in.) Spindle Taper MT-3 MT-3 Spindle Travel: Manual 5 4-1/2 Auto 4-1/4 Tapping 4-7/8 4-7/8 Quill Diameter 3 3 Spindle Distance to Base 44-3/8 44-3/8 Spindle Distance to Table 30-7/8 30-7/8 Table Size 21-1/4 x 18-1/2 21-1/4 x 18-1/2 T-slots, number & size 2 & 5/8 2 & 5/8 T-slot Centers 6-1/4 6-1/4 of Spindle Speeds Range of Spindle Speeds (RPM) 60-3, ,000 of Powerfeeds 3 Range of Powerfeeds.004,.007,.01 Motor 2HP, 230V, 3Ph, 2-speed 2HP, 230V, 3Ph, 2-speed Floor Space Required (in./l x W x H) 32 x 24 x x 24 x 71 Net , , , , See page 86 of the 2006 Industrial Catalog, No , for more information. 40 Effective May 1, 2008 through August 31, 2008

41 drills metalworking 20" GEARED HEAD DRILL PRESS Heavy duty design allows a variety of precision drilling applications Easy to read internal depth gauge (GHD-20) Three power down feeds (GHD-20PF) Calibrated fine down feed built-in Built-in spindle lock Head tilts left or right Easy accessible table raiser STOCK NO GHD-20 GHD-20PF Drills to Center of Circle Cast Iron Drilling 1-1/2 1-1/2 Steel Drilling 1-1/4 1-1/4 Column Diameter 4-1/2 4-1/2 Distance Spindle to Column (max./in.) Spindle Taper MT-3 MT-3 Spindle Travel (GHD-20) 5 5 Spindle Travel (GHD-20PF) Manual 4-1/2 4-1/2 Spindle Travel (GHD-20PF) Auto 4-1/4 4-1/4 Quill Diameter 3 3 Spindle Distance to Base 44-3/8 44-3/8 Spindle Distance to Table 30-7/8 30-7/8 Table Size 21-1/4 x 18-1/2 21-1/4 x 18-1/2 T-slots, & Size 2 & 5/8 2 & 5/8 T-slot Centers 9 9 of Spindle Speeds Range of Spindle Speeds (RPM) 60 & 3, & 3,000 of Powerfeeds (GHD-20PF) 3 3 Range of Powerfeeds.004,.007, ,.007,.01 Motor 2HP, 230V only, 3Ph, 2 Speed 2HP, 230V only, 3Ph, 2 Speed Floor Space Required (in./l x W x H) 32 x 24 x x 24 x 71 Net , , , , Buy a JET Machine and get a 50th Anniversary Panel Truck See page 85 of the 2006 Industrial Catalog, No , for more information. MILL/DRILL TABLES Dovetail slideways assure working accuracy Graduated dials Longitudinal and cross travel locks MDT-77 and MDT-512 have two slots; MDT-614 has three Slideways and table surfaces are precision ground STOCK NO " VARIABLE SPEED DRILL PRESS Unique gear drive for maximum torque to spindle Variable spindle speeds from 60 to 1800RPM Digital LED spindle speed readout Large T-slotted production table Keyed safety Lock switch T-slotted base for large work pieces NEW STOCK NO Drills to Center of Circle Cast Iron Drilling (max./in.) 1-1/4 1-1/4 1-1/4 Steel Drilling (max./in.) 1-1/8 1-1/8 1-1/8 Column Diameter 4-5/16 4-5/16 4-5/16 Range of Spindle Speeds (RPM) 60 to to to 1800 Distance Spindle to Column Distance Spindle to Table 26-3/4 26-3/4 26-3/4 Spindle Travel Base Slots and size 2 and 5/8 2 and 5/8 2 and 5/8 Motor 2HP, 230V, 1PH 2HP, 230V, 3PH 460V, 3PH 3, , , , , , Buy a Wilton Drill Press and get a 125-piece Socket Wrench Set 3/8" Drive Pre-selective torque drive prevents tap breakage 1.75:1 reverse ratio increases productivity Self-feed ensures gauge perfect threads STOCK NO. WTH75 REVERSIBLE TAPPING HEADS MDT-77 MDT-512 MDT-614 Table Travel 7 x 7 5 x 12 6 x 14 Long Cross T-slot Centers - 2-1/2 1-7/8 T-slot Size 5/8 5/8 1/ See page 78 of the 2006 Industrial Catalog, No , for more information. Description WTH75 3/4" Reversible Tapping Head Buy a Wilton Tapping Head and get a 5-piece Precision Mini Plier Set See page 108 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 41

42 20" VARIABLE SPEED AC INVERTER DRILL PRESSES Variable spindle speeds from 65 to 2000 RPM #3 Morse taper spindle Latest AC inverter variable speed technology Front mounted LED spindle RPM readout STOCK NO. 2232AC The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel giving extra strength and smoothness to high torque loads STOCK NO.720R 3' ARM RADIAL DRILL PRESS 2232AC 2234AC Drills to Center of Circle Cast Iron Drilling 1-1/2 1-1/2 Steel Drilling 1-3/8 1-3/8 Quill Diameter 3 3 Distance Spindle to Column 10-7/ /16 Distance Spindle to Table (max./in.) 32-3/8 32-3/8 Spindle Speeds (RPM) 65 to to 2000 Spindle Travel 6 6 Spindle Taper 3 MT 3 MT Quill Travel 6 6 Column Diameter 4-1/2 4-1/2 Table Working Surface 18-1/8 x 14-3/4 18-1/8 x 14-3/4 T-Slot & Size 2 & 5/8 2 & 5/8 Table Travel 32-3/8 32-3/8 Table Overall Size 22 x 18-3/4 22 x 18-3/4 Base Working Surface 15-1/4 x 12-1/ /4 x 12-1/16 Base Slots & Size 2 & 5/8 2 & 5/8 Overall Base Size 27-2/4 x /4 x 20 Motor 2HP, 220V, 3Ph 2HP, 440V, 3Ph Floor Space Required (in./l x W x H) 37 x 27 x 82-1/4 37 x 27 x 82-1/4 Net , , , , Power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel giving extra strength and smoothness to high torque loads Buy a Wilton Drill Press and get a 26-piece Socket Wrench Set 1/2" Drive See page 96 of the 2006 Industrial Catalog, No , for more information. 4' ARM RADIAL DRILL PRESSES STOCK NO. 1100R Buy a Wilton Drill Press and get a 12-piece Socket Wrench Set 3/8" Drive See page 104 of the 2006 Industrial Catalog, No , for more information. 720R Steel Drilling 1-1/2 Cast Iron Drilling 2 Steel Tapping 3/4 Cast Iron Tapping 1 Steel Boring 2-3/4 Cast Iron Boring 4 Column Diameter 8-1/4 Distance from Column to Spindle (max./in.) 29-1/2 Distance from column to spindle center, (min./in.) 8-5/8 Travel of head (Horizontal/in.) 20-7/8 Distance from base to spindle end, (max./in.) 41-3/4 Distance from base to spindle end, (min./in.) 9-5/8 Travel of arm (Vertical/in.) 23-13/16 Table Size 23-5/8 x 17-1/2 x 15 T-slot & Size (in) 3 & 3/4 Base Dimensions 49-5/8 x 25-3/16 x 6-9/32 Range of Spindle Speeds (RPM) 6 ( ) Feed Rates (IPR).002,.004,.006 Motor 3HP, 230/460V, 3Ph, Prewired 230V Elevating Motor 1HP Coolant Pump Motor 1/8HP Machine Height from Floor (max./in.) 85-7/16 Floor Space Required (in./l x W x H) 64 x 32 x 85 ping , , Buy a Wilton Drill Press and get a 125-piece Socket Wrench Set 3/8" Drive See page 103 of the 2006 Industrial Catalog, No , for more information. 1100R 1100R R 1230R-4 Steel Drilling 1-3/4 1-3/4 1-7/8 1-7/8 Cast Iron Drilling 2-1/4 2-1/4 2-5/16 2-5/16 Steel Tapping Cast Iron Tapping 1-1/4 1-1/4 1-1/2 1-1/2 Steel Boring 3-3/8 3-3/8 3-3/8 3-3/8 Cast Iron Boring 4-3/4 4-3/4 4-3/4 4-3/4 Column Diameter 10-1/4 10-1/ / /16 Distance from Column to Spindle (max./in.) 43-5/ / Distance from Column to Spindle (min./in.) 9-5/8 9-5/8 13-3/4 13-3/4 Travel of head (Horizontal) 33-5/8 33-3/ Distance Base to Spindle (max./in.) 50-3/8 50-3/ Distance Base to Spindle (min./in.) 12-5/8 12-5/8 19-3/8 19-3/8 Travel of arm (Vertical/in.) /8 34-5/8 Table Dimensions 24-3/4 x 20-1/2 x 16-1/2 24-3/4 x 20-1/2 x 16-1/2 27-7/8 x 20-1/2 x 16-1/2 27-7/8 x 20-1/2 x 16-1/2 T-slot & Size 3 & 3/4 3 & 3/4 3 & 3/4 3 & 3/4 Base Dimensions 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 Spindle Travel w/power Feed Engaged Spindle Speeds (RPM) 12 ( ) 12 ( ) 12 ( ) 12 ( ) Feed Rates (IPR) 3 (.002,.004,.006) 3 (.002,.004,.006) 3 (.002,.004,.006) 3 (.002,.004,.006) Motor (2-Speed) (Low & High) 1-1/2 to 3HP, 230V, 3Ph 1-1/2 to 3HP, 460V, 3Ph 2-1/2 to 5HP, 230V, 3Ph 2-1/2 to 5HP, 460V, 3Ph Elevating Motor 1HP 1HP 1HP 1HP Coolant Pump Motor 1/8HP 1/8HP 1/8HP 1/8HP Machine Height from Floor / /2 Floor Space Required (in./l x W x H) 74 x 34 x x 34 x x 39 x x 39 x 89 ping , , , , , , , , Effective May 1, 2008 through August 31, 2008

43 drills & Forming metalworking 5' ARM RADIAL DRILL PRESS The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel giving extra strength and smoothness to high torque loads ARBOR PRESS For all production and assembly applications Precision cut steel rams and pinions for accurate operation STOCK NO AP-0 AP-1 AP-2 AP-3 AP-5 Diameter of Work 6-5/ /8 10-3/4 17 Over Table /8 11-3/8 18 Size and Length of Ram 3/4 x 7-7/8 1 x 9-1/8 1-1/4 x /2 x 18 2 x 27-1/2 Tons Pressure (approx.) 1/ Ram Bore 3/8 3/8 1/2 1/2 1/2 Arbor Press Height /4 21-1/2 33-7/8 Base Size 4 x 9-1/2 5 x 10-3/4 6-3/8 x /2 x /8 x 26 Net , See page 118 of the 2006 Industrial Catalog, No , for more information STOCK NO. 1600R 1600R Drilling 2-1/2 Cast Iron Drilling 2-7/8 Steel Tapping 2 Cast Iron Tapping 2-3/8 Steel Boring 5 Cast Iron Boring 7-3/8 Column Diameter 17 Distance from Column to Spindle (max./in.) 63 Distance from Column to Spindle (min./in.) 17 Travel of head (Horizontal) 49-5/8 Distance Base to Spindle (max./in.) 63 Distance Base to Spindle (min./in.) 13 Travel of arm (Vertical/in.) 50 Table Dimensions 27-7/8 x 19-5/8 x 15-3/4 T-slot & Size 3 & 7/8 Base Dimensions 97-5/8 x 41-11/32 x 8-1/4 Range of Spindle Speeds (RPM) 12 ( ) Feed Rates (IPR) 6 ( IPR) Motor 7-1/2HP, 230/460V, 3Ph, Prewired 230V Elevating Motor 2HP Clamping Motor 1HP Coolant Pump Motor 1/2HP Machine Height from Floor /64 Floor Space Required (in./l x W x H) 116 x 55 x 112 ping 11,220 42, , Buy a Wilton Drill Press and get a 125-piece Socket Wrench Set 3/8" Drive See page 105 of the 2006 Industrial Catalog, No , for more information. For pressing, bending and straightening operations Easy-to-use, hand-operated with pressure gauge for direct pressure readings Tables raise and lower easily with use of hand crank on the 15-, 35- and 60-ton models Side frames are open for insertinglong material Fast setup ram extension screw STOCK NO HYDRAULIC SHOP PRESS HP-5A HP-15A HP-35A HP-60 (tons) Ram Diameter 1-3/4 2-1/2 3 5 Piston Stroke 4 4-1/2 4-3/4 5-1/2 Screw Stroke 3 3-1/8 4 4 Work Table 19 x 5-1/2 24-3/4 x 7-1/2 31 x 10-3/8 44-1/2 x 8 Lateral Movement / Vert Table Travel 15-3/4 22-3/ /8 29-1/2 Auxiliary Hand Press ,000 Base Size 23-1/2 x /8 x 29-1/2 33-1/2 x /2 x 55-1/2 Height 51-1/ Net ,570 1, , , , , , , See page 118 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 43

44 Suitable for many types of metalforming operations All body sections are welded steel plate STOCK NO BENCH MODEL HAND BRAKES HB-1648N Mild Steel (Gauge) 16 Maximum Lift of Beam 1-1/4 Bending Length 48 Beam Adjustment (in.front to rear) 5/8 Overall Dimensions (in./l x W x H) 61 x 21 x 28 Net (lbs) 430 1, Equipment Stand for HB-2248N & HB-1648N See page 111 of the 2006 Industrial Catalog, No , for more information. Capable of shearing sheet steel, steel bars and rods plus many non-metallic materials Replaceable high quality stainless steel blades are hardened and tempered for maximum service life Shown with optional stand HAND SPLITTING SHEARS SLIP ROLLS, BENCH MODELS Suitable for many industrial, educational and vocational shop uses Precision turned carbon steel rolls that are ground and polished Large roll adjusting screws facilitate lifting upper roll for easy material removal STOCK NO Shown with optional stand SR-2024N SR-2236N SR-1650N (Mild Steel Gauge) Max. Forming Length and Diameter of rolls 3 and 2 3 and 2 3 and 3 Min. Forming Radius Wire Grooves 3/16, 1/4, 5/16 3/16, 1/4, 5/16 1/4, 5/16, 3/8 Overall Dimensions (in./l x W x H) 37 x 17 x x 17 x x 22 x 24 Net , , Optional Equipment Floor Stand SRS-24N SRS-36N SRS-50N Fits SR-2024N SR-2236N SR-1650N (open pedestal style) Overall Dimensions (in./l x W x H) 30 x 14 x X 14 x x 22 x 30 Net See page 116 of the 2006 Industrial Catalog, No , for more information STOCK NO K K K SS-8N SS-12N Sheet (mild steel/in.) 3/16 1/8 Flat (mild steel/in.) 2-3/4 x 1/4 2-3/8 x 5/32 Round (mild steel/in.) 1/2 1/ See page 117 of the 2006 Industrial Catalog, No , for more information. COMBINATION SHEAR, BRAKE AND ROLL Combination shear, brake and roll in one compact machine Right or left hand operation STOCK NO Shown with optional stand Ideal for precision shearing of mild steel up to 16 gauge Can also be used on aluminum, brass, copper, lead, plastic and zinc STOCK NO FOOT SHEARS FS-1652H (Mild Steel Gauge) 16 Shearing Length 52 Back Gauge 25-1/2 Front Gauge 28 Overall Dimensions (in./l x W x H) 62-1/2 x 21-1/4 x 41-1/2 Net , , Buy a JET Foot Shear and get a 50th Anniversary Panel Truck SBR-30N SBR-40N Shearing (mild steel) (Gauge x in.) 20 x x 40 Bending (mild steel) (Gauge x in.) 20 x x 40 Rolling (mild steel) (Gauge x in.) 20 x x 40 Size of Slip Roll (in./l x W) 30 x 1-1/2 40 x 1-5/8 Width of Upper Dies 1, 2, 3, 6, 8, 10 1, 1-1/2, 2, 2-1/2, 4, 7,10, 15 Upper Die Height 4-3/8 3-3/8 Net , , Optional Equipment Floor Stand SRS-30N SRS-40N Fits SBR-30N SBR-40N Overall Dimensions (in./l x W x H) 36-1/2 x 17-1/2 x x 21 x 30 Net Buy a JET Machine and get a 50th Anniversary Panel Truck See page 114 of the 2006 Industrial Catalog, No , for more information. See page 115 of the 2006 Industrial Catalog, No , for more information. 44 Effective May 1, 2008 through August 31, 2008

45 forming & finishing metalworking Made of cast iron Capable of notching virtually any shearable material Can notch angles of more than 90 through a two step process Easy-to-read front gauges Heavy-duty cutting blade STOCK NO HAND NOTCHER UL listed Totally enclosed, pre-lubricated ball bearings Heavy-duty guarded toggle switch on 8" and 10" Rubber mounts prevent movement STOCK NO INDUSTRIAL BENCH GRINDERS HN-16N Cutting (Gauge) 16 Piercing (Gauge) 18 Maximum Notch 7 Stroke 3/4 Overall Dimensions (in./l x W x H) 24 x 21 x 26 Net Optional Equipment Floor Stand S-16N Stand for HN-16N Hand Notcher See page 117 of the 2006 Industrial Catalog, No , for more information. Simple manual operation for ease of use Six bending dies included standard (1/2", 3/4", 1", 1-1/4", 1-1/2", 2") Rotating stand locks in three positions for stability and versatility Heavy-duty hydraulic cylinder capable of bending schedule 40 pipe STOCK NO JHPB-20 JHPB-30 Pipe Size 1/2-2 1/2-3 Max. Pipe wall thickness 1/5 6/25 Maximum Load (Tons) 9 20 Piston Stroke 10-1/4 12-5/8 Ram Diameter 1-3/4 2-1/3 Net Long throat makes unit highly versatile Performs burring, edging, elbowing, flanging, flattening and turning Adjustable roll pressure by means of top mounted hand crank STOCK NO PIPE BENDERS ROTARY MACHINE RM-22N Cutting (Gauge) 22 Distance Between Shaft Centers 2 Depth of Throat to Frame 7 Overall Dimensions (in./l x W x H) 18 x 8 x NEW JBG-6A JBG-8A JBG-10A Shaft Diameter 1/2 5/8 1 Wheel Diameter (dia. x W/in.) 6 x 3/4 8 x 1 10 x 1 Wheel Speed (RPM) 3,450 3,450 1,725 Wheel Grits 36/60 36/60 24/46 Motor 1/2HP, 1Ph, 115V 1HP, 1Ph, 115V 1-1/2HP, 1Ph,115V Overall Dimensions (L x W x H/in.) 18 x 8-1/2 x 10-1/2 19 x 10 x 12-1/2 24-1/2 x 13 x 12-1/4 Net See page 123 of the 2006 Industrial Catalog, No , for more information. Heavy-duty cast iron construction provides strength and durability Wide stance base gives you a stable grinder workstation STOCK NO JPS-2A Mounting Surface (L x W/in.) 11 x 10 Overall Height 31 Net See page 122 of the 2006 Industrial Catalog, No , for more information. 2" x 72" VARIABLE SPEED Square Wheel Grinder Infinitely Variable Speeds 100 to 6000 sfpm Latest AC Inverter Variable Speed technology Continuous speed adjustment while in operation East to view sfpm readout STOCK NO. 4126AC PEDESTAL STAND Shown with optional stand 4126AC 4103 Belt Size (in./w x L) 2 x 72 2 x 72 Belt Speed (SFPM) 1100 to Contact Wheel 8 8 Contact Wheel Durometer Motor 1HP, 115V, 1Ph, AC Inverter 1HP, 115/230V, 1Ph Net , , , , Buy a Wilton machine and get a 77-piece Flex Handle Socket & Bit Set See page 127 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 45

46 1" X 42" & 2" x 42" BENCH BELT & DISC SANDERS Hinged idler wheel cover Power take off, allows for mounting an optional flex shaft, when can be used to do carving, drum sanding, deburring and dozens of other jobs Deluxe miter gauge that turns and locks for common angles 45 both left and right STOCK NO INDUSTRIAL COMBINATION BELT & DISC FINISHING MACHINE Belt operates at any angle Powered by a heavy-duty, UL/CSA approved, 1-1/2HP TEFC motor STOCK NO. 4200A Overall Dimensions (in./w x D x H) 15 x 24-1/2 x 19-1/2 20-1/2x22-3/4x20 Belt Size (in./w x L) 1 x 42 2 x 42 Belt Speed (SFPM) Belt Table Size 6-1/8 x 7-1/8 10 x 6 Belt and Disc Table Tilt 45 Out 0 to 45 Disc Diameter 8 8 Disc Speed (RPM) Disc Table Size 4 x /4 x 7-1/2 Dust Collection Outlet Diameter 1-1/2 1-1/2 Motor 1/3HP, 115V, 1Ph 3/4HP, 1Ph, 115V Machine Dimensions (in./w x D x H) 21 x 22 x /2 x 22-3/4 x 20 Net lbs See page 128 of the 2006 Industrial Catalog, No , for more information. 4200A/4200A A Belt Size (in./w x L) 6 x 48 6 x 48 Belt Speed (SFPM) Belt Table Size 7-3/8 x 14-3/4 7-3/8 x 14-3/4 Belt Table Tilt 45 Out, 20 Platen 45 Out, 20 Platen Disc Size Disc Speed (RPM) Disc Table Size (in./w x L) 12 x 16-3/8 12 x 16-3/8 Disc Table Tilt 45 Out; 20 In 45 Out; 20 In Miter Gauge Groove 3/8 x 3/4 3/8 x 3/4 Motor 1-1/2HP, 115/230V, 1Ph 1-1/2HP, 230V, 3Ph Net (lbs) , , , , Buy a Wilton Finishing Machine and get a 77-piece Flex Handle Socket & Bit Set See pages 131 of the 2006 Industrial Catalog, No , for more information. COMBINATION BELT & DISC FINISHING MACHINE 6" x 48" Belt 10" Disc Two cast iron titling tables for mitering applications Full access to the belt when titled in the horizontal position Dust collection shrouds on belt and disc STOCK NO. 4210K 4210K Belt Size (in./w x L) 6 x 48 Belt Speed (SFPM) 1650 Belt Table Size (in./w x L) 6 x 10-1/2 Disc Size 10 Disc Speed (RPM) 2100 Disc Table Size 7-1/2 x 13 Table Slots 5/8 Table Tilt 45 Out Motor 1HP, 115V, 1Ph Net See pages 130 of the 2006 Industrial Catalog, No , for more information. 6" INDUSTRIAL BELT FINISHING MACHINE Table tilts 45 Out, and 20 in for all angle finishing operations Adjustable dust deflector and dust chute Completely enclosed drums and guarded sanding belt Fine thread adjustment for simple and easy belt tracking STOCK NO. 4300A 4300A 4301A Belt Size (in./w x L) 6 x 48 6 x 48 Belt Speed (SFPM) Table Tilt 45 Out, 20 In 45 Out, 20 In Platen 6-1/4 x 14-3/4 6-1/4 x 14-3/4 Motor 4300A 1-1/2HP, 115/230V, 1Ph 1-1/2HP, 230V, 3Ph Overall Dimensions (in./w x D x H) 25-1/2 x 19 x 57-1/2 (Width when belt is in horizontal position) 25-1/2 x 19 x 57-1/2 (Width when belt is in horizontal position) Net , , , , Buy a Wilton Finishing Machine and get a 5-piece Precision Mini Plier Set See page 132 of the 2006 Industrial Catalog, No , for more information. 46 Effective May 1, 2008 through August 31, 2008

47 finishing metalworking 12" INDUSTRIAL DISC FINISHING MACHINE Optimum speed of 1960 rpm, which is ideal for both metal and wood finishing Fully machined, balanced disc runs vibration free Plain and compound miters are easily obtained by using the standard die-cast aluminum miter gauge STOCK NO. 4400A 4400A 4401A Disc Size Disc speed (RPM) Table Size 12 x 16-3/8 12 x 16-3/8 Table tilt 45 out, 20 in 45 out, 20 in Miter gauge groove 3/8 x 3/4 3/8 x 3/4 Motor 1-1/2HP, 115/230V, 1Ph 1-1/2HP, 230V, 3Ph Overall Dimensions (in./w x D x H) 16 x 19 x x 19 x 43 Net , , , , Buy a Wilton Finishing Machine and get a 5-piece Precision Mini Plier Set See pages 132 of the 2006 Industrial Catalog, No , for more information. 6" X 8" PRECISION MANUAL SURFACE GRINDER Base, saddle, table and column feature high quality cast iron Table action by cogged timing belt system Tilting table capability adds flexibility of 45 forward and 15 backward on positive lock rack and gear Table can be lowered below the disc to accommodate large work pieces STOCK NO " DISC SANDER Disc Size Disc Speed (RPM) Table Size 27-1/2 x 10-1/2 27-1/2 x 10-1/2 Table Slot 3/8 x 10-1/2 3/8 x 10-1/2 Table Tilt 45 forward, 15 backward 45 forward, 15 backward Motor 3HP, 220V, 3Ph 3HP, 440V, 3Ph Net , , , , Buy a Finishing Machine and get a 6-piece Combination Wrench Set See page 134 of the 2006 Industrial Catalog, No , for more information. PRECISION AUTOMATIC SURFACE GRINDER Base, saddle, table and column feature high quality cast iron Fully automatic operation in 3-axis STOCK NO STOCK NO JPSG-618M1 Table Size 6 x 18 Grinding (in./w x L) 7 x 19 T-slots, () Size (1) 9/16 Longitudinal Table Travel (max./in.) 20 Cross Table Travel (max./in.) 7-3/4 Cross Handwheel Graduation.0005 Cross Handwheel per Revolution.02 Spindle Centerline to Table (max./in.) 18 Vertical Handwheel Graduation.0001 Vertical per Handwheel Revolution.05 Spindle Speed (RPM) 3,450 Motor 2HP, 230/460V, 3Ph Prewired 230V Overall Dimensions (in./w x D x H) 74 x 45 x 68 Net 1,585 8, , See pages 120 of the 2006 Industrial Catalog, No , for more information JPSG-1224A Table Size 12 x 24 Grinding (in./w x L) 12-3/16 x 25-1/2 T-slots, () Size (1) 1/2 Maximum Table Load 880 Longitudinal Manual Table Travel (max./in.) 28 Longitudinal Auto. Table Travel (max./in.) 25-9/16 Longitudinal Table Speed (FPM) Cross Table Travel 12-9/16 Cross Handwheel Graduation.001 Cross Handwheel per Revolution.0001 Cross Feed per Auto. Pass Main Motor (TEFC) 3HP, 230/460V, 3Ph, prewired 230V Overall Dimensions (in./w x D x H) 110 x 76 x 89 Net , , See pages 121 of the 2006 Industrial Catalog, No , for more information. jettools.com wiltontool.com 47

48 EFFECTIVE MAY 1 AUGUST 31 See Inside for truck give-aways MAXIMUM OVERDRIVE 2 GREAT BRANDS, MILES OF SAVINGS With the purchase of select JET products JET 50th Anniversary Panel Truck 1:24 Scale Die-Cast Collectible 1957 Chevy Panel Truck HURRY! LIMITED QUANTITY AVAILABLE With the purchase of select Wilton products 6" & 10" Turtle Wax Waxers 5 PC. Precision Mini Plier Set 6 PC. Combination Wrench Set Flex Handle Socket & Bit Set 125 PC. Socket Wrench Set 26 PC. Socket Wrench Set HOW To get YOUR ITEMS With your qualifying purchase, you don't need to fill out any mail-in forms; just ask your dealer for your Free item(s). Remember, your dealer has limited quantities of the giveaway products available. So take advantage of these great savings opportunities while supplies last. WIN BIG! SIGN UP FOR the JET 50th SWEEPSTAKES jettools.com/50 OFFER AVAILABLE AT PARTICIPATING DEALERS ONLY WHILE SUPPLIES LAST. WMH TOOL GROUP RESERVES THE RIGHT TO CORRECT ANY PRICING, PRODUCT SPECIFICATIONS OR IMAGE DISCREPANCIES WMH Tool Group, Inc. All rights Reserved. Printed in the U.S.A. The color WHITE is a registered trademark of WMH Tool Group, Inc. No M 03/ WMH Tool Group, Inc. All Rights Reserved. Printed in the U.S.A. WMH Tool Group, Inc. Elgin, IL wmhtoolgroup.com