DOOR HARDWARE PRICE BOOK

Transcription

1 DOOR HARDWARE PRIE BOOK ASSA ABLOY, the global leader in door opening solutions

2 ELETRONI LOKSETS Electronic Keypad Entrance Handlesets, Deadbolts, Leversets Liscio Electronic Keypad Leverset with Bluetooth Programming ENTRY SETS Mortise Entrance Handlesets Mortise Knob by Knob, Lever by Lever Entrance Locksets Tubular Entrance Handlesets Grip by Grip Entrance Handlesets Key in Lever & Key in Knob Locksets SINGLE AND TWO-POINT LOKSETS Brass Single and Two-Point Locksets DEADBOLTS Single ylinder, Double ylinder Deadbolts Single Sided Deadbolts SIDEPLATE LOKSETS Keyed and Non-Keyed Sideplate Locksets Thumbturn Privacy Sideplate Locksets STRETTO NARROW TRIM LOKSETS 2 x 10, 1.5 x 11 STRETTO Narrow Trim Locksets 1.5 x 5 STRETTO Narrow Trim Passage & s PASSAGE & PRIVAY SETS Leversets & Knobsets Thumbturn Privacy for Passage & s rystal & Porcelain Door Knobs with Threaded Spindles ONTEMPORARY OLOR OLLETION Tubular Handleset, Deadbolts, Passage & Privacy Leversets DOOR PULLS Appliance Pulls, Back to Back Pulls Door Pulls, Push & Pull Plates POKET DOOR MORTISE Passage, Privacy and Keyed DOOR AESSORIES Flush Pulls Surface Bolts Door Stops Floor Bumpers House Numbers Doorbells HINGES Square Barrel Solid Brass Hinges Solid Brass Hinges Steel Hinges Stainless Steel Hinges Spring Hinges Hinge Screws PARTS & OPTIONS Replacement Parts Index by ollection Product Index Order Form Lifetime Limited Warranty

3 Polished Brass (US3) Polished Brass - Lifetime (US3) Satin Brass (US4) French Antique (US7) FINISH OPTIONS Oil Rubbed Bronze (US10B) Polished Nickel (US14) Polished Nickel - Lifetime (US14) Satin Nickel (US15) Pewter (US15A) Flat Black (US19) Polished hrome (US26) Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products. Flat Black Bronze Patina (FB) Medium Bronze Patina (MB) Tumbled White Bronze (TWB) Flat Black Steel (FBS) Satin Steel (SWS) Brushed Stainless Steel (SS) Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products. Unlacquered Brass (US3NL) Door Hardware Price Book Effective October 16, 2017

4 GENERAL INFORMATION ORDERING AND RETURNS Placing Orders You have several options to place an order: Fax: Phone: Mail:Emtek Products, Inc E. Stafford Street ity of Industry, A Hours of Operation Monday Friday: 5:00 AM - 5:00 PM Pacific Time. Minimum Order Requirements There are no minimum order quantity requirements. SHIPPING AND FREIGHT Shipping osts For shipments to customers located in the U.S. or anada, Emtek ships freight prepaid. For shipments to customers located in Mexico, Emtek ships freight prepaid via UPS ground. For shipments to customers located outside of North America, freight will be prepaid by Emtek to the U.S. location of the customer s freight forwarder. Large orders may ship LTL or ground service at our discretion. Shipping Options Shipments can be upgraded to 2nd Day Service or Next Day Service for a fee. Orders not shipping to the customer s place of business must ship via 2nd Day or Next Day Service, and additional charges will apply for shipments to a residential address. Unfortunately, a customer s freight account cannot be used to pay for shipping charges. Payment Terms Net 30 Days on established credit. Payment Options We accept check, Visa, Masterard, Discover and AH. Sales Tax Sales tax will be charged unless a resale certificate has been provided. Prices All prices listed are in US funds. Our prices are subject to change without prior notice. Returns For your convenience, returns do not require authorization. Returns can be processed directly from the Emtek website, lick on the Dealer Site icon on the right side of the bottom half of the home page, and then select Product Returns. Fill out the RGA form, and follow the link to generate a UPS call tag (terms and conditions apply see the web site for details). A completed RGA form must accompany all packages for returned goods. Returns are accepted from the Emtek dealer who originally purchased the product that is being returned. Any refund or credit would only be made to the original dealer. All returned goods are subject to a minimum 25% restocking fee. Returns for reasons other than an Emtek factory or processing error will be subject to our customary restocking fee with a return freight charge of $15.00 in the United States or $30.00 in anada or Mexico. This charge will be deducted from the credit issued for each call tag. No freight will be charged if the return is sent prepaid. Order Lead time Emtek assembles all products to order in ity of Industry, alifornia. Orders typically ship within two to three business days once an order is released to the factory. DEALER INFORMATION PORTAL Online Account Access We are pleased to announce that you can now access your Emtek account information through the ASSA ABLOY customer information portal, crcdash. Through crcdash you can access information about your account at any time. You can: heck on the status of orders View both order and sales history View and print order acknowledgements, invoices, statements and credits Track shipments To register for crcdash or to make changes to access rights, we require the approval from your company s owner, EO, President, or other corporate officer. To get started, lick on the Dealer Site icon on the bottom half of the home page, and then select Forms & Instructions. Please complete the crcdash Access Rights Form and to: crcdash.emtek@assaabloy.com. Should you have any questions, please contact ustomer Service. 4

5 NO HARGE SAMPLE PROGRAM Sample Program Samples are gladly provided at no charge to authorized dealers, under the following conditions: ½ Door Lock (max 2) ½ Pair of Hinges (max 2) abinet Knob or Pull (max 3) Door Accessory (max 1) A shipping and handling fee of $2.50 per sample will be applied to your order ($2.50 for one sample, $5.00 for two samples, $7.50 for three samples, etc.) Sample Order Exceptions Samples must be different product codes. Samples do not include active door hardware sets, 8 or larger cabinet pulls, door pulls, appliance pulls, electronic locks, entry sets, bath hardware or door accessories over $75 list. Placing a Sample Order Send orders to samples@emtek.com or place by fax, phone, or mail. Write NO HARGE SAMPLE on the order. Standard shipment upgrade charges will apply for expedited freight requests. Orders for sample products must be placed separately and not combined with other products. Emtek does not require samples to be returned. Minimum Advertised Price Policy Effective February 6, 2017 Emtek has determined that in order to better compete against existing competitors it must exercise a greater degree of control over the distribution of its products. Therefore, all sales of Emtek products will be subject to this Policy. This Policy has been unilaterally adopted and will be enforced strictly and uniformly. Although resellers remain free to establish their own resale prices, to the extent that any customer elects to advertise products of Emtek in any manner, that is in print, in electronic media, on its website, etc., and provides price information for such products, that price information must be no less than List Price less 20%, this is the Minimum Advertised Price (MAP). Advertisements and offers to sell that do not include a particular price, but require further action that implies a price that is lower than the Minimum Advertised Price violate the MAP Policy. Examples of such unauthorized advertisements include drop in cart pricing, add to cart pricing, click to see pricing, and discount coupon pricing. Also prohibited are advertisements that indicate that discounts may be available when a customer takes specific action that goes beyond buying the product, such as special price option or name your price. GENERAL INFORMATION No Restocking Fee harged for Sample Orders with Exceptions Send orders to samples@emtek.com or place by fax, phone, or mail. Write DEALER SAMPLE on the order. Keep the samples you want and return the samples you don t. ontact ustomer Service for Return Authorization in advance to ensure a restock fee is not applied to the return. Product must be returned in its original condition. Return freight charge of $15USD in the United States or $30USD in anada or Mexico. This charge will be deducted from the credit issued for each call tag. No freight will be charged if the return is sent prepaid. NO HARGE DISPLAY PROGRAM Display Program Emtek offers a variety of quality, well-crafted displays. We take great pride in the quality of our displays, which are hand-built in our Southern alifornia facility by our talented craftsmen. lick on the Dealer Site icon on the right side of the bottom half of the home page, and then select Displays. Browse our online catalog using the navigation system on the left column to view by function, style, or material. Placing a Display Order Please contact your local sales representative for ordering information. Product for use on Displays in your Showroom Thank you for considering Emtek products for use on door displays and kitchen/ bath vignettes installed in your showroom. Please contact your local sales representative for ordering information. To assure fair business practices, we will strictly enforce this policy. Violations of this MAP Policy will include termination of our business relationship with a customer. On the first offense there will be a written notice counseling any customer that disregards this policy. Any customer who violates the policy a second time, within one year of receiving a written notice of a first violation, will be terminated. Emtek will not discuss any conditions of acceptance related to this Policy, as it is non-negotiable and will not be altered for any dealer. In addition, Emtek neither solicits, nor will it accept, any assurance of compliance with this Policy. Nothing in this Policy shall constitute an agreement between Emtek and any reseller that the reseller will comply with this Policy. 5

6 oventry Lever (V) LASSI Milano Lever (M) Elan Lever (EN) Rustic Lever (R) Merrimack Lever (ME) Turino Lever (T) Ribbon & Reed Lever (RBL) Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) DESIGNER LASSI DESIGNER ortina Lever () Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) Oval Rosette Rectangular Rosette Regular Rosette Quincy Rosette Wilshire Rosette Ribbon & Reed Rosette Rope Rosette LASSI KNOB, LEVER, AND ROSETTE OPTIONS SOLID BRASS DESIGNER #8 Rosette Lancaster Rosette MODERN BRASS 6 Aireon Lever (A) Argos Lever (AG) Athena Lever (ATN) Basel Lever (BA) Geneva Lever (GV) Helios Lever (HLO) Hercules Lever (HE) Hermes Lever (HER) Luzern Lever (LU) Mercury Lever (M) Poseidon Lever (POS) Sion Lever (SIO) Stuttgart Lever (STU) Triton Lever (TRT) Bern Knob (BN) Octagon Knob (OT) Orb Knob (OR) Round Knob (ROU) Square Knob (SQU) Disk Rosette Modern Rectangular Rosette Modern Rosette Neos Rosette Square Rosette

7 ARTS & RAFTS BRASS RYSTAL Arts & rafts Lever (A) Astoria lear Knob (AS) Hammered Lever (HM) Bristol Knob (BL) Hammered Egg Knob (HE) Diamond rystal Knob (K) Georgetown Knob (GT) Arts & rafts Rectangular Rosette Hampton Knob (HT) Hammered Rosette Lowell rystal Knob (LW) KNOB, LEVER, AND ROSETTE OPTIONS Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) PORELAIN Ebony Knob (EB) Ice White Knob (IW) Porcelain Rosette SANDAST BRONZE Aurora Lever (AR) imarron Lever (R) ody Lever (D) Durango Lever (D) Lariat Lever (LR) Montrose Lever (MT) Teton Lever (TT) Yuma Lever (YM) Butte Knob (BU) Egg Knob (BZEG) Round Knob (BZRN) Winchester Knob (W) #1 Rosette #2 Rosette #3 Rosette #4 Rosette #6 Rosette 7

8 KNOB, LEVER, AND ROSETTE OPTIONS LOST WAX AST BRONZE Medici Lever (MDI) Octagon Knob (OK) WROUGHT STEEL Lafayette Lever (L) Napoli Lever (NA) Parma Knob (PA) Normandy Lever (N) Petal Knob (PT) Octagon Lever (OL) San arlos Lever (S) Padua Lever (PD) #11 Rosette #12 Rosette #14 Rosette #15 Rosette Porcelain Knobs with Wrought Steel Stems Jamestown Knob (J) Savannah Knob (SV) Madison Black Knob (MB) Madison Ivory Knob (MI) #1 Rosette #2 Rosette #3 Rosette STAINLESS STEEL Athena Lever (AT) ologne Lever (O) Dresden Lever (DD) Helios Lever (HL) Hercules Lever (HS) Hermes Lever (HES) Kiel Lever (KL) Poseidon Lever (PO) Stuttgart Lever (STT) Octagon Knob (OK) Round Knob (RNK) 8 Beveled (01) Rosette Disk (02) Rosette Square (03) Rosette

9 Determining handing for door hardware is different than determining handing for carpentry (ordering and hanging doors). If you follow the standard carpentry rules for handing door hardware, instead of following the diagram below, there is good chance you may end up with a lock that is handed incorrectly. Please refer to the diagram below and if you have any questions, call ustomer Service at (800) HANDING IN-SWING DOOR IN-SWING DOOR OUT-SWING DOOR OUT-SWING DOOR LEFT (LH) RIGHT (RH) LEFT (LH) RIGHT (RH) HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE The outside of an exterior door is the street or entrance side. The outside of a room door is the hall side. The outside of a closet door is the room or hall side. The outside of a single communicating door is the side from which the hinges are not visible when the door is closed. Standard On Request (at no charge) Latches Mortise Drive-in Backsets 2-3/8 2-3/4 Strike Plates Full Lip Square orner 1/4 Radius, Extended, T-Strike Face Plates Square orner 1/4 Radius Passage & Sample Views Passage, Standard Privacy, Standard Passage, F Mechanism Privacy Pin No Exposed Screws, Exterior, Interior, Exterior, Interior, Exterior with F Mechanism, Interior with F Mechanism 9

10 LASSI & DESIGNER BRASS FINISH AVAILABILITY HART LASSI DESIGNER LASSI DESIGNER LASSI DESIGNER ortina Lever () oventry Lever (V) Egg Knob (E) Beaded Egg Knob (BE) #8 Rosette Lancaster Rosette Milano Lever (M) Elan Lever (EN) Melon Knob (MN) Belmont Knob (BT) Oval Rosette Ribbon & Reed Rosette Rustic Lever (R) Merrimack Lever (ME) Norwich Knob (NW) Lancaster Knob (LN) Rectangular Rosette Rope Rosette Turino Lever (T) Ribbon & Reed Lever (RBL) Providence Knob (P) Ribbon & Reed Knob (RBK) Regular Rosette Rope Lever (RL) Waverly Knob (W) Rope Knob (RK) Quincy Rosette Santa Fe Lever (SF) Victoria Knob (V) Wilshire Rosette Wembley Lever (WM) 10 US3 Lifetime US7 US14 US10B US15 US15A US19 US26 US3NL* Lifetime

11 lassic Brass Levers Designer Brass Levers lassic Brass Knobs Designer Brass Knobs ortina Lever () Milano Lever (M) Rustic Lever (R) Turino Lever (T) oventry Lever (V) Elan Lever (EN) Merrimack Lever (ME) Ribbon & Reed Lever (RBL) Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) Beaded Egg Knob (BE) Belmont Knob (BT) US3 Lifetime US7 US14 US10B US15 US15A US19 US26 Lifetime US3NL* LASSI & DESIGNER BRASS FINISH AVAILABILITY HART Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) lassic Brass Rosettes Victoria Knob (V) #8 Rosette Oval Rosette Rectangular Rosette Regular Rosette Quincy Rosette Designer Brass Rosettes Wilshire Rosette Lancaster Rosette Ribbon & Reed Rosette Rope Rosette *Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products. 11

12 MODERN BRASS FINISH AVAILABILITY HART Aireon Lever (A) Helios Lever (HLO) Poseidon Lever (POS) Argos Lever (AG) Hercules Lever (HE) Sion Lever (SIO) Athena Lever (ATN) Hermes Lever (HER) Stuttgart Lever (STU) Basel Lever (BA) Luzern Lever (LU) Triton Lever (TRT) Geneva Lever (GV) Mercury Lever (M) Bern Knob (BN) Octagon Knob (OT) Orb Knob (OR) Round Knob (ROU) Square Knob (SQU) Disk Rosette Modern Rectangular Rosette Modern Rosette Neos Rosette Square Rosette 12 US4 US14 US10B US15 US19 US26 US3NL* Lifetime

13 Modern Brass Levers Aireon Lever (A) Argos Lever (AG) Athena Lever (ATN) Basel Lever (BA) Geneva Lever (GV) Helios Lever (HLO) Hercules Lever (HE) Hermes Lever (HER) Luzern Lever (LU) Mercury Lever (M) Poseidon Lever (POS) Sion Lever (SIO) Stuttgart Lever (STU) US4 US14 US10B US15 US19 US26 Lifetime US3NL* MODERN BRASS FINISH AVAILABILITY HART Modern Brass Knobs Triton Lever (TRT) Bern Knob (BN) Octagon Knob (OT) Orb Knob (OR) Round Knob (ROU) Modern Brass Rosettes Square Knob (SQU) Disk Rosette Modern Rectangular Rosette Modern Rosette Neos Rosette Square Rosette *Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products. 13

14 RYSTAL, PORELAIN FINISH AVAILABILITY HART RYSTAL LASSI DESIGNER Astoria lear Knob (AS) Modern Disc rystal Knob (MD) #8 Rosette Lancaster Rosette Bristol Knob (BL) Modern Square rystal Knob (MS) Oval Rosette Ribbon & Reed Rosette Diamond rystal Knob (K) Rectangular Rosette Rope Rosette Old Town lear Knob (OT) Georgetown Knob (GT) Regular Rosette Hampton Knob (HT) Providence rystal Knob (P) Quincy Rosette Lowell rystal Knob (LW) Windsor rystal Knob (WS) Wilshire Rosette Disk Rosette Modern Rectangular Rosette Modern Rosette Neos Rosette Square Rosette #1 Rosette #2 Rosette #3 Rosette #4 Rosette #6 Rosette PORELAIN Ebony Knob (EB) Ice White Knob (IW) Porcelain Rosette US3 Lifetime US4 US7 US14 US10B US15 US15A US19 US26 US3NL* Lifetime 14 FB** MB** TWB**

15 rystal Knobs Astoria lear Knob (AS) Bristol Knob (BL) Diamond Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell Knob (LW) Modern Disc Knob (MD) Modern Square Knob (MS) Old Town lear Knob (OT) Providence Knob (P) Windsor Knob (WS) lassic #8 Rosette Brass Rosettes Oval Rosette Rectangular Rosette Regular Rosette US3 Lifetime US4 US7 US14 US10B US15 US15A US19 US26 US3NL* FB** MB** TWB** Lifetime RYSTAL, PORELAIN FINISH AVAILABILITY HART Quincy Rosette Wilshire Rosette Designer Lancaster Rosette Brass Rosettes Ribbon & Reed Rosette Rope Rosette Modern Brass Rosettes Disk Rosette Modern Rectangular Rosette Modern Rosette Neos Rosette Square Rosette Sandcast Bronze Rosettes #1 Rosette #2 Rosette #3 Rosette #4 Rosette #6 Rosette Porcelain Knobs & Rosette Ebony Porcelain Knob (EB) Ice White Porcelain Knob (IW) Porcelain Rosette *Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products. **Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products. 15

16 SANDAST BRONZE, LOST WAX AST BRONZE FINISH AVAILABILITY HART SANDAST BRONZE Aurora Lever (AR) Montrose Lever (MT) Butte Knob (BU) #1 Rosette LOST WAX AST BRONZE Medici Lever (MDI) imarron Lever (R) Teton Lever (TT) Egg Knob (BZEG) #2 Rosette Napoli Lever (NA) ody Lever (D) Yuma Lever (YM) Round Knob (BZRN) #3 Rosette Octagon Lever (OL) Durango Lever (D) Winchester Knob (W) #4 Rosette Padua Lever (PD) Lariat Lever (LR) #6 Rosette Octagon Knob (OK) Parma Knob (PA) Petal Knob (PT) #11 Rosette #12 Rosette #14 Rosette #15 Rosette 16 FB* MB* TWB*

17 Sandcast Bronze Levers Sandcast Bronze Knobs Sandcast Bronze Rosettes Lost Wax ast Bronze Levers Lost Wax ast Bronze Knobs Lost Wax ast Bronze Rosettes Aurora Lever (AR) imarron Lever (R) ody Lever (D) Durango Lever (D) Lariat Lever (LR) Montrose Lever (MT) Teton Lever (TT) Yuma Lever (YM) Butte Knob (BU) Egg Knob (BZEG) Round Knob (BZRN) Winchester Knob (W) #1 Rosette #2 Rosette #3 Rosette #4 Rosette #6 Rosette Medici Lever (MDI) Napoli Lever (NA) Octagon Lever (OL) Padua Lever (PD) Octagon Knob (OK) Parma Knob (PA) Petal Knob (PT) #11 Rosette #12 Rosette FB* MB* TWB* FB* MB* SANDAST BRONZE, LOST WAX AST BRONZE FINISH AVAILABILITY HART #14 Rosette #15 Rosette *Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products. 17

18 WROUGHT STEEL, STAINLESS STEEL FINISH AVAILABILITY HART WROUGHT STEEL Lafayette Lever (L) Jamestown Knob (J) #1 Rosette STAINLESS STEEL Athena Lever (AT) Normandy Lever (N) Savannah Knob (SV) #2 Rosette ologne Lever (O) San arlos Lever (S) Madison Black Knob (MB) #3 Rosette Dresden Lever (DD) Madison Ivory Knob (MI) Helios Lever (HL) Hercules Lever (HS) Hermes Lever (HES) Kiel Lever (KL) Poseidon Lever (PO) Stuttgart Lever (STT) Octagon Knob (OK) Round Knob (RNK) Beveled (01) Rosette Disk (02) Rosette Square (03) Rosette 18 FBS SWS SS

19 Wrought Steel Levers Wrought Steel Knobs Wrought Steel Rosettes Stainless Steel Levers Lafayette Lever (L) Normandy Lever (N) San arlos Lever (S) Jamestown Knob (J) Savannah Knob (SV) Madison Black Knob (MB) Madison Ivory Knob (MI) #1 Rosette #2 Rosette #3 Rosette Athena Lever (AT) ologne Lever (O) Dresden Lever (DD) FBS SWS SS WROUGHT STEEL, STAINLESS STEEL FINISH AVAILABILITY HART Helios Lever (HL) Hercules Lever (HS) Hermes Lever (HES) Kiel Lever (KL) Poseidon Lever (PO) Stainless Steel Knobs Stainless Steel Rosettes Stuttgart Lever (STT) Octagon Knob (OK) Round Knob (RNK) Beveled (01) Rosette Disk (02) Rosette Square (03) Rosette 19

20 ELETRONI HANDLESETS ELETRONI KEYPAD EMTouch Electronic Keypad Handleset EMTouch lassic Style Electronic Keypad Handleset Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. EMTOUH ELETRONI KEYPAD HANDLESET Knob or Lever Style for Inside Trim Single ylinder E4827 E4027 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ EMTOUH LASSI STYLE ELETRONI KEYPAD HANDLESET Knob or Lever Style for Inside Trim Single ylinder E4410 E4010 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ Product Features for Emtek Electronic Keypad Locksets: Factory programmed with 2 unique, 4-digit secure user codes for use right out of the box. an be programmed with up to 20 user codes of your choice. Emtek s standard mechanical and finish warranties along with a 2 year warranty on electronic components. EMTouch and all Emtek Keypad Locksets are covered by the following patents: anadian patents 2,698,041 2,789,278 2,789,280 U.S. patents 8,176,761 8,141,400 Handing Required if Lever Used on Inside Fits standard door thickness of 13/4. Specify if thicker. Standard door prep 21/8 bore. Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch, strike plate and a 9-volt battery. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 20 To order: (W) + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

21 ELETRONI HANDLESETS Modern Style Electronic Keypad Handleset Sandcast Bronze Style Electronic Keypad Handleset ELETRONI KEYPAD Order any brass knob or lever for the inside trim. Order any sandcast bronze knob or lever for the inside trim. MODERN STYLE ELETRONI KEYPAD HANDLESET Knob or Lever Style for Inside Trim Single ylinder E4817 E4017 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ SANDAST BRONZE STYLE ELETRONI KEYPAD HANDLESET Knob or Lever Style for Inside Trim Single ylinder E E See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ Product Features for Emtek Electronic Keypad Locksets: Factory programmed with 2 unique, 4-digit secure user codes for use right out of the box. an be programmed with up to 20 user codes of your choice. Emtek s standard mechanical and finish warranties along with a 2 year warranty on electronic components. EMTouch and all Emtek Keypad Locksets are covered by the following patents: anadian patents 2,698,041 2,789,278 2,789,280 U.S. patents 8,176,761 8,141,400 Handing Required if Lever Used on Inside Fits standard door thickness of 13/4. Specify if thicker. Standard door prep 21/8 bore. Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch, strike plate and a 9-volt battery. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 21

22 ELETRONI LOKSETS - DEADBOLTS ELETRONI KEYPAD EMTOUH Electronic Keypad Deadbolt E3020 $ * To order Adaptor for thin door (13/8" - 15/8"), add product code KEYDBEXT and list price $16. EMTOUH LASSI Electronic Keypad Deadbolt E3002 $ * To order Adaptor for thin door (13/8-15/8 ), add product code KEYDBEXT and list price $16. MODERN Electronic Keypad Deadbolt E1020 $ * To order Adaptor for thin door (13/8-15/8 ), add product code KEYDBEXT and list price $16. LASSI Electronic Keypad Deadbolt E1000 $ * To order Adaptor for thin door (13/8-15/8 ), add product code KEYDBEXT and list price $16. SANDAST BRONZE Electronic Keypad Deadbolt E1001 $ * Adaptor for thin door NOT available. STANDARD WITH KEYPAD DEADBOLT LOKSETS - Schlage Keyway - Standard Door Prep and Installation - Solid Brass ylinder, Housing, ollar and Rosette - Hardened Steel Bolt - Brass Trim Strike - Heavy Gauge Steel Understrike Handing Not Required Fits standard door thickness of 13/4. Specify if thicker. Standard door prep 21/8 bore. Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch, strike plate and a 9-volt battery. Emtek s standard mechanical and finish warranties along with a 2 year warranty on electronic components. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 22 To order: (W) + Backset + + Add Door Thickness to omments

23 LEVERSETS- ELETRONI LOKSETS EMTOUH Keypad Leverset Keypad Leverset with Storeroom/Gate Function E4020 E4220 Lever Style See Page 6 & 7 for Brass Lever Options. $ $ ELETRONI KEYPAD * To order Adaptor for thin door (13/8-15/8 ), add product code KEYLVREXT and list price $16. EMTOUH LASSI Lever Style Keypad Leverset Keypad Leverset with Storeroom/Gate Function E4002 E4202 See Page 6 & 7 for Brass Lever Options. $ $ * To order Adaptor for thin door (13/8-15/8 ), add product code KEYLVREXT and list price $16. MODERN Lever Style Keypad Leverset Keypad Leverset with Storeroom/Gate Function E2020 E2220 See Page 6 & 7 for Brass Lever Options. $ $ * To order Adaptor for thin door (13/8-15/8 ), add product code KEYLVREXT and list price $16. LASSI Lever Style Keypad Leverset Keypad Leverset with Storeroom/Gate Function E2000 E2200 See Page 6 & 7 for Brass Lever Options. $ $ * To order Adaptor for thin door (13/8-15/8 ), add product code KEYLVREXT and list price $16. SANDAST BRONZE Lever Style Keypad Leverset Keypad Leverset with Storeroom/Gate Function E2001 E2201 See Page 7 for Sandcast Bronze Lever Options. $ $ * Adaptor for thin door NOT available. Passage Function in Locked Mode Outside lever always locked Entry by code or key only Inside lever always free Passage Function in Passage Mode Outside lever always free Entry by operating lever, no code or key require Inside lever always free Storeroom Function Outside lever always locked Entry by code or key only Inside lever always free Handing Required for Leversets Fits standard door thickness of 13/4. Specify if thicker. Standard door prep 21/8 bore. Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch, strike plate and a 9-volt battery. Emtek s standard mechanical and finish warranties along with a 2 year warranty on electronic components. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Lever Style + Handing + + Add Door Thickness to omments 23

24 ELETRONI LOKSET - LISIO ELETRONI KEYPAD LEVERSET WITH BLUETOOTH PROGRAMMING ELETRONI KEYPAD >> Liscio cannot be used in conjunction with a deadbolt for standard 51/2 center-to-center door preparation. Deadbolt dimensions vary, please verify door preparation based on actual deadbolt measurements. Order any brass lever for the inside trim. Features and Technical Specifications: Includes a key cylinder on the exterior for backup access Ready-to-use with two codes pre-programmed in the lock Available in either standard or storeroom/gate functions Weatherproofed for use on exterior doors Low battery indicator lets you know when to change the battery Standard 9-volt battery (included) is housed in the interior trim Supplied with both interior and exterior gaskets LISIO ELETRONI KEYPAD LEVERSET WITH BLUETOOTH PROGRAMMING Lever Style for Inside Trim Keypad Leverset Keypad Leverset with Storeroom/Gate Function E6000 E6200 See Page 6 & 7 for Brass Lever Options. $ $ * Adaptor for thin door NOT available. Emtek App Overview: Program and manage user codes for the lock using our free app Easy-to-use app wizard walks you through step-by-step setup for Bluetooth Add, edit, and delete user codes from your device The activity log will show you the date, time and user who opened the lock If you replace your phone or tablet, communicate existing data to your new device easily ommunicate with multiple locks using one Bluetooth device Apple ipad 3rd Gen/iPhone 4S and later using ios 6.1 and newer Handing Required for Leversets Fits standard door thickness of 13/4. Specify if thicker. Standard door prep 21/8 bore. Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch, strike plate and a 9-volt battery. Emtek s standard mechanical and finish warranties along with a 2 year warranty on electronic components. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 24 To order: (W) + Lever Style (for Inside Trim only) + Handing + + Add Door Thickness to omments

25 ANSI F20 UL LISTED HEAVY DUTY LOK BODY F20 Mortise Lock Box WITHOUT Faceplate Installed WITH Faceplate Installed Deadbolt operated by key outside, thumbturn inside When locked outside, latch bolt and deadbolt are operated by key outside When deadbolt is engaged, outside thumb press/knob/lever is automatically locked Latch bolt retracted by thumb press/knob/lever either side, except when outside thumb press/knob/lever is locked by stop button Operating inside knob/lever retracts latch bolt and deadbolt simultaneously with outside thumb press/knob/lever remaining locked Deadlocking latch bolt Forged Deadbolt with Deadbolt has saw-proof inserts Anti-saw Inserts UL Listed Mortise Door Prep ANSI A115.1 Anti-Pick Security latch UL180 minute fire rating MORTISE ENTRY SETS Anti-Friction Trigger Stop Button Release Button HOW TO ORDER Add FUNTION to the, Backset, Lever / Knob, Handing and. For example: F HLO RH US10B Function Entry Set 2-1/2 Backset Inside Lever Handing ANSI F13 UL LISTED HEAVY DUTY LOK BODY F13 Mortise Lock Box WITHOUT Faceplate Installed WITH Faceplate Installed Forged Deadbolt with Anti-saw Inserts Anti-Pick Security latch Anti-Friction Trigger Deadbolt operated by key outside, thumbturn inside When deadbolt is engaged, outside thumb press/knob/lever is automatically locked Latch bolt retracted by thumb press/knob/lever either side Operating inside knob/lever retracts latch bolt and deadbolt simultaneously, automatically unlocking outside thumb press/knob/lever Deadlocking latch bolt Deadbolt has saw-proof inserts UL Listed Mortise Door Prep ANSI A115.1 UL180 minute fire rating HOW TO ORDER Add FUNTION to the, Backset, Lever / Knob, Handing and. For example: F HLO RH US10B Function Entry Set 2-3/4 Backset Inside Lever Handing 25

26 ENTRANE HANDLESETS - BRASS MORTISE MORTISE ENTRY SETS Mormont Mortise Lugano Mortise ANSI F13 Lugano Mortise Order any brass knob or lever for the inside trim. UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function MORMONT MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH Satin Brass (US4) $ $ LUGANO MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH Satin Brass (US4) $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. 26 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

27 BRASS MORTISE - ENTRANE HANDLESETS Brisbane Mortise Adelaide Mortise ANSI F13 Adelaide Mortise MORTISE ENTRY SETS Order any brass knob or lever for the inside trim. BRISBANE MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH Satin Brass (US4) $ $ ADELAIDE MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH Satin Brass (US4) $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 27

28 ENTRANE HANDLESETS - BRASS MORTISE MORTISE ENTRY SETS Zeus Mortise Artemis Mortise Hera Mortise ANSI F13 Hera Mortise Order any brass knob or lever for the inside trim. ZEUS MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ ARTEMIS MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH Satin Brass (US4) $ $ HERA MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH Satin Brass (US4) $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. 28 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

29 BRASS MORTISE - ENTRANE HANDLESETS Harrison Mortise Middleton Mortise ANSI F13 Middleton Mortise MORTISE ENTRY SETS Order any brass knob or lever for the inside trim. UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function HARRISON MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ MIDDLETON MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 29

30 ENTRANE HANDLESETS - BRASS MORTISE MORTISE ENTRY SETS Salem Mortise Memphis Mortise ANSI F13 Memphis Mortise Order any brass knob or lever for the inside trim. SALEM MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ MEMPHIS MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. 30 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

31 BRASS MORTISE - ENTRANE HANDLESETS harleston Mortise Albany Mortise ANSI F13 Albany Mortise MORTISE ENTRY SETS Order any brass knob or lever for the inside trim. UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function HARLESTON MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ ALBANY MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 31

32 ENTRANE HANDLESETS - BRASS MORTISE MORTISE ENTRY SETS Mills Mortise Manhattan Mortise Melrose Mortise ANSI F13 Melrose Mortise Order any brass knob or lever for the inside trim. MILLS MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ MANHATTAN MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ MELROSE MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. 32 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

33 BRASS MORTISE - ENTRANE HANDLESETS Hamilton Mortise Regency Mortise Versailles Mortise ANSI F13 Versailles Mortise MORTISE ENTRY SETS Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function HAMILTON MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ REGENY MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ VERSAILLES MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 33

34 ENTRANE HANDLESETS - BRASS MORTISE MORTISE ENTRY SETS raftsman Mortise raftsman Full Length Mortise ANSI F13 raftsman Full Length Mortise Order any brass knob or lever for the inside trim. RAFTSMAN MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ RAFTSMAN FULL LENGTH MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. 34 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

35 SANDAST BRONZE MORTISE - ENTRANE HANDLESETS Sonoma Mortise Longmont Mortise ANSI F13 Longmont Mortise MORTISE ENTRY SETS Order any sandcast bronze knob or lever for the Inside trim. UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function SONOMA MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ LONGMONT MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 35

36 ENTRANE HANDLESETS - SANDAST BRONZE MORTISE MORTISE ENTRY SETS Denver Mortise heyenne Mortise Topeka Mortise ANSI F13 Topeka Mortise Order any sandcast bronze knob or lever for the Inside trim. DENVER MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ HEYENNE MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ TOPEKA MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. 36 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

37 SANDAST BRONZE MORTISE - ENTRANE HANDLESETS MORTISE ENTRY SETS Rectangular Sectional Mortise Rectangular Monolithic Mortise Rectangular Full Length Mortise ANSI F13 Rectangular Full Length Mortise MORTISE ENTRY SETS Order any sandcast bronze knob or lever for the Inside trim. RETANGULAR SETIONAL MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ RETANGULAR MONOLITHI MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ RETANGULAR FULL LENGTH MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 37

38 ENTRANE HANDLESETS - SANDAST BRONZE MORTISE MORTISE ENTRY SETS Morgan Mortise Rockford Mortise ANSI F13 Rockford Mortise Order any sandcast bronze knob or lever for the Inside trim. UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function MORGAN MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ ROKFORD MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. 38 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

39 LOST WAX AST BRONZE MORTISE - ENTRANE HANDLESETS Octagon Mortise Da Vinci Mortise ANSI F13 Da Vinci Mortise MORTISE ENTRY SETS Order any lost wax cast bronze knob or lever for the inside trim. Order any lost wax cast bronze knob or lever for the inside trim. OTAGON MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 8 for Lost Wax ast Bronze LH/RH $ See Page 7 for rystal & Porcelain Knob Options. $ DA VINI MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function /2 or 23/4 See Page 8 for Lost Wax ast Bronze LH/RH $ See Page 7 for rystal & Porcelain Knob Options. $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 39

40 ENTRANE HANDLESETS - STAINLESS STEEL MORTISE MORTISE ENTRY SETS Mormont Stainless Steel Mortise ANSI F13 Mormont Stainless Steel Mortise Order any stainless steel knob or lever for the inside trim. UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function MORMONT STAINLESS STEEL MORTISE Backset Knob or Lever Style for Inside Trim Handing Entry Set Specify F20 or F13 Function S /2 or 23/4 See Page 8 for Stainless Steel LH/RH Brushed Stainless Steel (SS) $ S3001 $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. 40 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

41 BRASS KNOB BY KNOB & LEVER BY LEVER MORTISE - ENTRANE LOKSETS Mormont Mortise Brisbane Mortise ANSI F13 Brisbane Mortise MORTISE ENTRY SETS Interior trim view UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function MORMONT MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH Satin Brass (US4) $ $ BRISBANE MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH Satin Brass (US4) $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 41

42 ENTRANE LOKSETS - BRASS KNOB BY KNOB & LEVER BY LEVER MORTISE MORTISE ENTRY SETS Artemis Mortise Harrison Mortise ANSI F13 Harrison Mortise Interior trim view UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function ARTEMIS MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH Satin Brass (US4) $ $ HARRISON MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. 42 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

43 BRASS KNOB BY KNOB & LEVER BY LEVER MORTISE - ENTRANE LOKSETS Manhattan Mortise harleston Mortise Memphis Mortise MORTISE ENTRY SETS Interior trim view MANHATTAN MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ HARLESTON MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ MEMPHIS MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 43

44 ENTRANE LOKSETS - BRASS KNOB BY KNOB & LEVER BY LEVER MORTISE MORTISE ENTRY SETS Hamilton Mortise Regency Mortise raftsman Mortise ANSI F13 raftsman Mortise Interior Trim View HAMILTON MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ REGENY MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ RAFTSMAN MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. 44 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

45 SANDAST BRONZE KNOB BY KNOB & LEVER BY LEVER MORTISE - ENTRANE LOKSETS Rectangular Mortise heyenne Mortise Hailey Mortise UL Listed Mortise with ANSI F20 Function UL Listed Mortise with ANSI F13 Function MORTISE ENTRY SETS Interior Trim View RETANGULAR MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ HEYENNE MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ HAILEY MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. LH/RH $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments 45

46 ENTRANE LOKSETS - LOST WAX AST BRONZE & STAINLESS STEEL KNOB BY KNOB & LEVER BY LEVER MORTISE MORTISE ENTRY SETS Da Vinci Mortise Octagon Mortise Mormont Stainless Steel Mortise ANSI F13 Mormont Stainless Steel Mortise Interior Trim View DA VINI MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 8 for Lost Wax ast Bronze Knob & Lever Options. See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ OTAGON MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function /2 or 2 3/4 See Page 8 for Lost Wax ast Bronze Knob & Lever Options. See Page 7 for rystal & Porcelain Knob Options. LH/RH $ $ MORMONT STAINLESS STEEL MORTISE Backset Knob or Lever Style Handing Entry Set Specify F20 or F13 Function S3501 S /2 or 2 3/4 See Page 8 for Stainless Steel Knob & Lever Options. LH/RH Brushed Stainless Steel (SS) $ $ Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. 46 To order: Function + + Backset + Knob/Lever Style + Handing + + Add Door Thickness to omments

47 REPLAEMENT PARTS FOR F20 & F13 MORTISE LOKS - ENTRANE LOKSETS MORTISE ENTRY SETS Steel Understrike Supplied with all Mortise Locks Brass Standard Strike Plate 1 7/8 wide x 4 7/8 high Supplied with Mortise Locks unless door thickness is specified as 2 or greater Brass Flat Strike Plate 1 7/8 wide x 4 7/8 high Supplied with Mortise Locks when requested Brass Extended Strike Plate 2 1/2 wide x 4 7/8 high Supplied with Mortise Locks when door thickness is specified as 2 or greater ADDITIONAL STRIKE PLATES (F20 & F13) Brass Standard Strike Plate with understrike and screws Brass Flat Strike Plate with understrike and screws Brass Extended Strike Plate with understrike and screws $16.00 $16.00 $16.00 MORTISE LOK BOX ONLY Includes Face Plate, Trimplate and Strike Plate. ylinder Not Included. Backset Handing Thumb by Lever or Knob Knob by Knob & Lever by Lever Specify F20 or F13 Function /2 or 2 3/4 2 1/2 or 2 3/4 LH/RH LH/RH $ $ YLINDER ONLY Length Threaded Mortise Y5-ThrdMrt1375 Y5-ThrdMrt150 Y5-ThrdMrt /8 1 1/2 1 3/4 $28.00 $28.00 $28.00 Handing is Required for All Mortise Locks Standard door thickness of 13/4. Specify if thicker. Locks for in-swing doors are standard, for out-swing doors please specify. *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. To order: (Function) + Backset + Handing + + Add Door Thickness to omments 47

48 ENTRANE HANDLESETS - BRASS TUBULAR TUBULAR ENTRY SETS Baden Davos Lausanne Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. Interconnect device available for most brass tubular handlesets BADEN Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ $ DAVOS (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ $ LAUSANNE (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ $ INTERONNET DEVIE Davos & Lausanne Styles 443 Not Available for Double ylinder. $58.00 *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 48 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

49 BRASS TUBULAR - ENTRANE HANDLESETS Ares Apollo Orion TUBULAR ENTRY SETS Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. ARES Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $ APOLLO (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $ ORION (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $ INTERONNET DEVIE Apollo & Orion Styles 443 Not Available for Double ylinder. $58.00 *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 49

50 ENTRANE HANDLESETS - BRASS TUBULAR TUBULAR ENTRY SETS Zeus Arts & rafts Arts & rafts Full Length Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. ZEUS (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ ARTS & RAFTS (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ ARTS & RAFTS FULL LENGTH (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Available for Above Styles 443 Not Available for Double ylinder. $58.00 *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 50 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

51 BRASS TUBULAR - ENTRANE HANDLESETS Franklin Adams Jefferson TUBULAR ENTRY SETS Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. FRANKLIN Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ ADAMS (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ JEFFERSON (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Adams & Jefferson Styles 443 Not Available for Double ylinder. $58.00 *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 51

52 ENTRANE HANDLESETS - BRASS TUBULAR TUBULAR ENTRY SETS Hamden Wilshire Melrose Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. HAMDEN Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Polished Nickel - Lifetime (US14) $ $ $ WILSHIRE (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Polished Nickel - Lifetime (US14) $ $ $ MELROSE (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Polished Nickel - Lifetime (US14) $ $ $ INTERONNET DEVIE Wilshire & Melrose Styles 443 Not Available for Double ylinder. $58.00 *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 52 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

53 BRASS TUBULAR - ENTRANE HANDLESETS Nashville Richmond Wilmington TUBULAR ENTRY SETS Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. NASHVILLE Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ RIHMOND (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ WILMINGTON (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Richmond & Wilmington Styles 443 Not Available for Double ylinder. $58.00 *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 53

54 ENTRANE HANDLESETS - BRASS TUBULAR TUBULAR ENTRY SETS Saratoga Marietta Knoxville Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. SARATOGA Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ MARIETTA (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ KNOXVILLE Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Marietta Style 443 Not Available for Double ylinder. $58.00 *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 54 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

55 BRASS TUBULAR - ENTRANE HANDLESETS Orleans Ribbon & Reed Imperial TUBULAR ENTRY SETS Order any brass knob or lever for the inside trim. Order any brass knob or lever for the inside trim. ORLEANS (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ RIBBON & REED (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ IMPERIAL (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Available for Above Styles 443 Not Available for Double ylinder. $58.00 *Unlacquered Brass (US3NL) finish available for a $50 upcharge per item. Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 55

56 ENTRANE HANDLESETS - SANDAST BRONZE TUBULAR TUBULAR ENTRY SETS Ridgemont Logan Brighton Order any sandcast bronze knob or lever for the inside trim. Order any sandcast bronze knob or lever for the inside trim. RIDGEMONT Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ LOGAN (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ BRIGHTON (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Logan & Brighton Styles 443 Not Available for Double ylinder. $58.00 Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 56 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

57 SANDAST BRONZE TUBULAR - ENTRANE HANDLESETS Denver Remington Greeley TUBULAR ENTRY SETS Order any sandcast bronze knob or lever for the inside trim. Order any sandcast bronze knob or lever for the inside trim. DENVER Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ REMINGTON (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ GREELEY (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Remington & Greeley Styles 443 Not Available for Double ylinder. $58.00 Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 57

58 ENTRANE HANDLESETS - SANDAST BRONZE TUBULAR TUBULAR ENTRY SETS Rectangular Sectional Rectangular Monolithic Rectangular Full Length Order any sandcast bronze knob or lever for the inside trim. Order any sandcast bronze knob or lever for the inside trim. RETANGULAR SETIONAL Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ RETANGULAR MONOLITHI (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ RETANGULAR FULL LENGTH (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Rectangular Monolithic & Full Length Styles 443 Not Available for Double ylinder. $58.00 Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 58 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

59 SANDAST BRONZE TUBULAR - ENTRANE HANDLESETS Laramie Sheridan reston TUBULAR ENTRY SETS Order any sandcast bronze knob or lever for the inside trim. Order any sandcast bronze knob or lever for the inside trim. LARAMIE Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ SHERIDAN (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ RESTON (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Sheridan & reston Styles 443 Not Available for Double ylinder. $58.00 Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 59

60 ENTRANE HANDLESETS - LOST WAX AST BRONZE TUBULAR TUBULAR ENTRY SETS Tuscany Sectional Tuscany Monolithic Order any lost wax cast bronze knob or lever for the inside trim. Order any lost wax cast bronze knob or lever for the inside trim. TUSANY SETIONAL Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 8 for Lost Wax ast Bronze See Page 7 for rystal & Porcelain Knob Options. $ $ $ TUSANY MONOLITHI (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 8 for Lost Wax ast Bronze See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Tuscany Monolithic Style 443 Not Available for Double ylinder. $58.00 Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 60 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

61 LOST WAX AST BRONZE TUBULAR - ENTRANE HANDLESETS Art Nouveau Octagon TUBULAR ENTRY SETS Order any lost wax cast bronze knob or lever for the inside trim. Order any lost wax cast bronze knob or lever for the inside trim. Left Hand Grip Right Hand Grip ART NOUVEAU (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder Specify LH/RH Grip See Page 8 for Lost Wax ast Bronze See Page 7 for rystal & Porcelain Knob Options. $ $ $ OTAGON (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 8 for Lost Wax ast Bronze See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Available for Above Styles 443 Not Available for Double ylinder. $58.00 Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 61

62 ENTRANE HANDLESETS - WROUGHT STEEL TUBULAR TUBULAR ENTRY SETS Sectional with Lafayette Grip Sectional with San arlos Grip Sectional with Normandy Grip Order any wrought steel knob or lever for the inside trim. SETIONAL WITH LAFAYETTE GRIP Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 8 for Wrought Steel Flat Black Steel (FBS) Satin Steel (SWS) $ $ $ SETIONAL WITH SAN ARLOS GRIP Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 8 for Wrought Steel Flat Black Steel (FBS) Satin Steel (SWS) $ $ $ SETIONAL WITH NORMANDY GRIP Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 8 for Wrought Steel Flat Black Steel (FBS) Satin Steel (SWS) $ $ $ Handing Required if Lever Used on Inside Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 62 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

63 WROUGHT STEEL TUBULAR - ENTRANE HANDLESETS Monolithic with Lafayette Grip Monolithic with San arlos Grip Monolithic with Normandy Grip TUBULAR ENTRY SETS Order any wrought steel knob or lever for the inside trim. MONOLITHI WITH LAFAYETTE GRIP (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 8 for Wrought Steel Flat Black Steel (FBS) Satin Steel (SWS) $ $ $ MONOLITHI WITH SAN ARLOS GRIP (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 8 for Wrought Steel Flat Black Steel (FBS) Satin Steel (SWS) $ $ $ MONOLITHI WITH NORMANDY GRIP (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder See Page 8 for Wrought Steel Flat Black Steel (FBS) Satin Steel (SWS) $ $ $ INTERONNET DEVIE Available for Above Styles 443 Not Available for Double ylinder. $58.00 Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 63

64 ENTRANE HANDLESETS - STAINLESS STEEL TUBULAR TUBULAR ENTRY SETS Davos Stainless Steel Zeus Stainless Steel Order any stainless steel knob or lever for the inside trim. Order any stainless steel knob or lever for the inside trim. DAVOS STAINLESS STEEL (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder S40101 S40100 See Page 8 For Stainless Steel Brushed Stainless Steel (SS) $ $ ZEUS STAINLESS STEEL (51/2 enter to enter Door Prep) Knob or Lever Style for Inside Trim Single ylinder Double ylinder S40001 S40002 See Page 8 For Stainless Steel Brushed Stainless Steel (SS) $ $ S40000 $ INTERONNET DEVIE Available for Above Styles 443 Not Available for Double ylinder. $58.00 Handing Required if Lever Used on Inside or if Interconnect Device is Specified Fits standard door thickness of 13/4. Specify if thicker. Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 28º Rotation latch not available for use with Tubular Entrance Handlesets. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 64 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

65 GRIP BY GRIP ENTRANE HANDLESETS Exterior Profile Interior GRIP BY GRIP Double sided handlesets, also known as grip by grip, have a full length trim on both the interior and exterior sides of the door. They are available in three functions: single cylinder, double cylinder, and dummy. The single cylinder configuration has a thumbturn which unlocks the door from the inside; while the double cylinder has keyed cylinders on both sides of the door. The dummy does not include a thumbturn, instead it only features matching trim on either side of the door with no locking functionality. Grip by Grip is a custom function made to order and requires an additional 2-3 day lead time. Also available in Brass handlesets, see page for styles - Please call for pricing. 65

66 GRIP BY GRIP ENTRANE HANDLESETS - SANDAST BRONZE GRIP BY GRIP Ridgemont Logan Brighton Denver Remington Greeley GRIP BY GRIP ENTRY SETS Description RIDGEMONT Single ylinder Double ylinder $ $ $ LOGAN Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ BRIGHTON Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ GRIP BY GRIP ENTRY SETS Description DENVER Single ylinder Double ylinder $ $ $ REMINGTON Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ GREELEY Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 2 3/8 backset. Specify 2 3/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 66 To order: (W) + + Add Door Thickness to omments

67 SANDAST BRONZE - GRIP BY GRIP ENTRANE HANDLESETS Rectangular Sectional Rectangular Monolithic Rectangular Full Length Laramie Sheridan reston GRIP BY GRIP GRIP BY GRIP ENTRY SETS Description RETANGULAR SETIONAL Single ylinder Double ylinder $ $ $ RETANGULAR MONOLITHI Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ RETANGULAR FULL LENGTH Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ GRIP BY GRIP ENTRY SETS Description LARAMIE Single ylinder Double ylinder $ $ $ SHERIDAN Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ RESTON Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 2 3/8 backset. Specify 2 3/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + + Add Door Thickness to omments 67

68 GRIP BY GRIP ENTRANE HANDLESETS - LOST WAX AST BRONZE GRIP BY GRIP Tuscany Sectional Tuscany Monolithic Octagon Art Nouveau Left Hand Grip Art Nouveau Right Hand Grip GRIP BY GRIP ENTRY SETS Description TUSANY SETIONAL Single ylinder Double ylinder $ $ $ TUSANY MONOLITHI Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ OTAGON Door Prep 5 1/2 enter to enter Single ylinder Double ylinder $ $ $ GRIP BY GRIP ENTRY SETS Description ART NOUVEAU Left Hand Grip (Outside) Door Prep 5 1/2 enter to enter Single ylinder Double ylinder LH LH $ $ LH $ ART NOUVEAU Right Hand Grip (Outside) Door Prep 5 1/2 enter to enter Single ylinder Double ylinder RH RH $ $ RH $ Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 2 3/8 backset. Specify 2 3/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 68 To order: (W) + + Add Door Thickness to omments

69 MODERN BRASS KEY IN LEVERSETS & KNOBSETS - ENTRANE LOKSETS Hanover Lever with Square Rosette Helios Lever with Modern Rectangular Rosette Luzern Lever with Square Rosette KEY IN LOKSETS KEY IN LEVERSETS Rosette Description Key In Lever Style Square Key in Lever, Key in Lever Hanover Lever (HN) Helios Lever (HLO) Luzern Lever (LU) Satin Brass (US4) $ $ Disk Key in Lever, Key in Lever Hanover Lever (HN) Helios Lever (HLO) Luzern Lever (LU) Satin Brass (US4) $ $ Modern Rectangular Key in Lever, Key in Lever Hanover Lever (HN) Helios Lever (HLO) Luzern Lever (LU) Satin Brass (US4) $ $ Round Knob with Square Rosette Round Knob with Disk Rosette Round Knob with Modern Rectangular Rosette KEY IN KNOBSETS Rosette Description Key In Knob Style Square Key in Knob, Key in Knob Round Knob (ROU) Satin Brass (US4) Polished Nickel - Lifetime (US14)** $ $ Disk Key in Knob, Key in Knob Round Knob (ROU) Satin Brass (US4) $ $ Modern Rectangular Key in Knob, Key in Knob Round Knob (ROU) Satin Brass (US4) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. **Polished Nickel - Lifetime (US14) available only for Round Key In Knob. Handing is Required for Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. Modern Brass Key In knobsets and leversets may be ordered with any Brass Key In rosette at the list price shown above. See page for Brass Key In rosette options. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Key In Knob/Lever Style + Handing + + Add Door Thickness to omments 69

70 ENTRANE LOKSETS - BRASS KEY IN LEVERSETS KEY IN LOKSETS ortina Lever with Regular Rosette ortina Lever with #8 Rosette ortina Lever with Rectangular Rosette Rope Lever with Rope Rosette KEY IN LEVERSETS Rosette Description Key In Lever Style Regular Key in Lever, Key in Lever ortina Lever () Rope Lever (RL) *** $ $ #8 Key in Lever, Key in Lever ortina Lever () Rope Lever (RL) *** $ $ Rectangular Key in Lever, Key in Lever ortina Lever () Rope Lever (RL) *** $ $ Rope Key in Lever, Key in Lever ortina Lever () Rope Lever (RL) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. *** NOT available for Rope Key In Lever. Handing is Required for Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. Brass Key In leversets may be ordered with any Modern Brass Key In rosette at the list price shown above. See page 69 for Modern Brass Key In rosette options. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 70 To order: (W) + Key In Lever Style + + Add Door Thickness to omments

71 BRASS KEY IN KNOBSETS - ENTRANE LOKSETS Waverly Knob with Regular Rosette Providence Knob with #8 Rosette KEY IN LOKSETS Egg Knob with Rectangular Rosette Rope Knob with Rope Rosette KEY IN KNOBSETS Rosette Description Key In Knob Style Regular Key in Knob, Key in Knob Egg Knob (E) Providence Knob (P) Rope Knob (RK) Waverly Knob (W) Polished Nickel - Lifetime (US14)** *** $ $ #8 Key in Knob, Key in Knob Egg Knob (E) Providence Knob (P) Rope Knob (RK) Waverly Knob (W) *** $ $ Rectangular Key in Knob, Key in Knob Egg Knob (E) Providence Knob (P) Rope Knob (RK) Waverly Knob (W) Polished Nickel - Lifetime (US14)** *** $ $ Rope Key in Knob, Key in Knob Egg Knob (E) Providence Knob (P) Rope Knob (RK) Waverly Knob (W) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. **Polished Nickel - Lifetime (US14) available only for Waverly Key In Knob. *** NOT available for Rope Key In Knob. Handing Not Required for Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. Brass Key In knobsets may be ordered with any Modern Brass Key In rosette at the list price shown above. See page 69 for Modern Brass Key In rosette options. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Key In Knob Style + Handing + + Add Door Thickness to omments 71

72 ENTRANE LOKSETS - SANDAST BRONZE KEY IN LEVERSETS KEY IN LOKSETS Durango Lever with #1 Rosette Durango Lever with #2 Rosette Durango Lever with #3 Rosette Durango Lever with #4 Rosette KEY IN LEVERSETS Rosette Description Key In Lever Style #1 Key in Lever, Key in Lever Durango Lever (D) $ $ #2 Key in Lever, Key in Lever Durango Lever (D) $ $ #3 Key in Lever, Key in Lever Durango Lever (D) $ $ #4 Key in Lever, Key in Lever Durango Lever (D) $ $ Handing is Required for Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 72 To order: (W) + Key In Lever Style + + Add Door Thickness to omments

73 SANDAST BRONZE KEY IN KNOBSETS - ENTRANE LOKSETS Winchester Knob with #1 Rosette Winchester Knob with #2 Rosette KEY IN LOKSETS Winchester Knob with #3 Rosette Winchester Knob with #4 Rosette KEY IN KNOBSETS Rosette Description Key In Knob Style #1 Key in Knob, Key in Knob Winchester Knob (W) $ $ #2 Key in Knob, Key in Knob Winchester Knob (W) $ $ #3 Key in Knob, Key in Knob Winchester Knob (W) $ $ #4 Key in Knob, Key in Knob Winchester Knob (W) $ $ Handing Not Required for Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Key In Knob Style + Handing + + Add Door Thickness to omments 73

74 ENTRANE LOKSETS - LOST WAX AST BRONZE KEY IN LEVERSETS & KNOBSETS KEY IN LOKSETS Siena Lever with #11 Rosette Siena Lever with #12 Rosette Siena Lever with #14 Rosette KEY IN LEVERSETS Rosette Description Key In Lever Style #11 Key in Lever Siena Lever (SN) $178.00, Key in Lever $ #12 Key in Lever Siena Lever (SN) $178.00, Key in Lever $ #14 Key in Lever Siena Lever (SN) $178.00, Key in Lever $ Petal Knob with #11 Rosette Petal Knob with #12 Rosette Petal Knob with #14 Rosette KEY IN KNOBSETS Rosette Description Key In Knob Style #11 Key in Knob Petal Knob (PT) $178.00, Key in Knob $ #12 Key in Knob Petal Knob (PT) $178.00, Key in Knob $ #14 Key in Knob Petal Knob (PT) $178.00, Key in Knob $ Handing is Required for Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 74 To order: (W) + Key In Knob/Lever Style + Handing + + Add Door Thickness to omments

75 STAINLESS STEEL KEY IN LEVERSETS - ENTRANE LOKSETS Hanover Lever with Disc Rosette Stainless Steel KEY IN LOKSETS KEY IN LEVERSETS Rosette Description Key In Lever Style Disc Key in Lever S901 Hanover Lever (HN) Brushed Stainless Steel (SS) $162.00, Key in Lever S951 $ Handing is Required for Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Key In Lever Style + Handing + + Add Door Thickness to omments 75

76 SINGLE & TWO-POINT LOKSETS - BRASS TUBULAR SINGLE & TWO-POINT Modern Rectangular Single Point with Round Key In Knobs Overall 9 3/4 Modern Rectangular with Round Key In Knobs MODERN RETANGULAR SINGLE POINT LOKSET Key In Knob / Lever Style Key in Knob/Lever Round Knob (ROU) Hanover Lever (HN) Helios Lever (HLO) Luzern Lever (LU) Satin Brass (US4) $ $ Modern Rectangular Two-Point, Single ylinder with Helios Key In Levers Modern Rectangular Two-Point, Double ylinder with Luzern Key In Levers Modern Rectangular Two-Point, with Hanover Key In Levers 5 1/2 MODERN RETANGULAR TWO-POINT LOKSET Key In Knob / Lever Style Single ylinder Double ylinder Round Knob (ROU) Hanover Lever (HN) Helios Lever (HLO) Luzern Lever (LU) Satin Brass (US4) $ $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required for Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required omplete set includes latch and strike plate. Any Key In Knob / Lever style options listed on this page can be used with Annapolis trim style. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 76 To order: (W) + Key In Knob/Lever Style + Handing + + Add Door Thickness to omments

77 BRASS TUBULAR - SINGLE & TWO-POINT LOKSETS Annapolis Single Point with Providence Key In Knobs Overall 9 3/4 Annapolis with Egg Key In Knobs SINGLE & TWO-POINT ANNAPOLIS SINGLE POINT LOKSET Key In Knob / Lever Style Key in Knob/Lever Egg Knob (E) Providence Knob (P) Rope Knob (RK) Waverly Knob (W) ortina Lever () Rope Lever (RL) ** $ $ Annapolis Two-Point, Single ylinder with Waverly Key In Knobs Annapolis Two-Point, Double ylinder with ortina Key In Levers Annapolis Two-Point, with ortina Key In Levers 5 1/2 ANNAPOLIS TWO-POINT LOKSET Key In Knob / Lever Style Single ylinder Double ylinder Egg Knob (E) Providence Knob (P) Rope Knob (RK) Waverly Knob (W) ortina Lever () Rope Lever (RL) ** $ $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. ** NOT available for Rope Key In Knob/Lever. Handing Required for Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required omplete set includes latch and strike plate. Any Key In Knob / Lever style options listed on this page can be used with Modern Rectangular trim style. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Key In Knob/Lever Style + Handing + + Add Door Thickness to omments 77

78 DEADBOLTS - BRASS DEADBOLTS STANDARD WITH BRASS DEADBOLTS Schlage Keyway Standard Door Prep and Installation Solid Brass ylinder, Housing, ollar, Thumbturn, and Rosette Hardened Steel Bolt Heavy Gauge Steel Understrike Brass Trim Strike Shipped with Every Deadbolt SQUARE DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder Satin Brass (US4) Polished Nickel - Lifetime (US14) $64.00 $70.00 MODERN DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder Satin Brass (US4) Polished Nickel - Lifetime (US14) $64.00 $70.00 NEOS DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder Satin Brass (US4) $64.00 $70.00 QUINY DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder $64.00 $70.00 *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 23/8 backset. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 78 To order: (W) + Backset + + Add Door Thickness to omments

79 BRASS - DEADBOLTS REGULAR DEADBOLT Includes Extension ollar for Thin Doors Single ylinder Double ylinder Polished Nickel - Lifetime (US14) $54.00 $60.00 DEADBOLTS LOW PROFILE DEADBOLT Includes Extension ollar for Thin Doors Single ylinder Double ylinder Polished Nickel - Lifetime (US14) $54.00 $60.00 WILSHIRE DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder Polished Nickel - Lifetime (US14) $64.00 $70.00 RETANGULAR DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder Polished Nickel - Lifetime (US14) $64.00 $70.00 SARATOGA DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder $64.00 $70.00 *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 23/8 backset. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Backset + + Add Door Thickness to omments 79

80 DEADBOLTS - BRASS DEADBOLTS #8 DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder Polished Nickel - Lifetime (US14) $64.00 $70.00 ROPE DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder $64.00 $70.00 KNOXVILLE DEADBOLT Single ylinder Includes extension collar for thin doors Double ylinder $64.00 $70.00 ARTS & RAFTS DEADBOLT Includes Extension ollar for Thin Doors Single ylinder Double ylinder $64.00 $70.00 *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 23/8 backset. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 80 To order: (W) + Backset + + Add Door Thickness to omments

81 SANDAST BRONZE - DEADBOLTS STANDARD WITH SANDAST BRONZE DEADBOLTS Schlage Keyway Standard Door Prep and Installation Solid Brass ylinder Sandcast Bronze ollar and Rosette Hardened Steel Bolt Heavy Gauge Steel Understrike Brass Trim Strike Shipped with Every Deadbolt DEADBOLTS REGULAR SANDAST BRONZE DEADBOLT Single ylinder Double ylinder $72.00 $78.00 #1 SANDAST BRONZE DEADBOLT WITH FLAP Single ylinder Double ylinder $72.00 $78.00 #3 SANDAST BRONZE DEADBOLT WITH FLAP Single ylinder Double ylinder $72.00 $78.00 #4 SANDAST BRONZE DEADBOLT WITH FLAP Single ylinder Double ylinder $72.00 $78.00 RIDGEMONT SANDAST BRONZE DEADBOLT WITH FLAP Single ylinder Double ylinder $72.00 $78.00 Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 23/8 backset. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Backset + + Add Door Thickness to omments 81

82 DEADBOLTS - LOST WAX AST BRONZE DEADBOLTS STANDARD WITH TUSANY BRONZE DEADBOLTS Schlage Keyway Standard Door Prep and Installation Solid Brass ylinder Lost Wax ast Bronze ollar and Rosette Hardened Steel Bolt Heavy Gauge Steel Understrike Brass Trim Strike Shipped with Every Deadbolt TUSANY BRONZE DEADBOLT Includes Extension ollar for Thin Doors Single ylinder Double ylinder $72.00 $78.00 LASSI TUSANY BRONZE DEADBOLT Includes Extension ollar for Thin Doors Single ylinder Double ylinder $72.00 $78.00 OTAGON TUSANY BRONZE DEADBOLT Single ylinder Double ylinder $72.00 $78.00 #11 TUSANY BRONZE DEADBOLT Single ylinder Double ylinder $72.00 $78.00 #14 TUSANY BRONZE DEADBOLT Single ylinder Double ylinder $72.00 $78.00 Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 23/8 backset. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 82 To order: (W) + Backset + + Add Door Thickness to omments

83 WROUGHT STEEL & STAINLESS STEEL - DEADBOLTS STANDARD WITH WROUGHT STEEL DEADBOLTS DEADBOLTS Schlage Keyway Standard Door Prep and Installation Solid Brass ylinder Wrought Steel ollar and Rosette Hardened Steel Bolt Heavy Gauge Steel Understrike Brass Trim Strike Shipped with Every Deadbolt WROUGHT STEEL #1 STYLE DEADBOLT Single ylinder Double ylinder Flat Black Steel (FBS) Satin Steel (SWS) $64.00 $70.00 WROUGHT STEEL #2 STYLE DEADBOLT Single ylinder Double ylinder Flat Black Steel (FBS) Satin Steel (SWS) $64.00 $70.00 WROUGHT STEEL #3 STYLE DEADBOLT Single ylinder Double ylinder Flat Black Steel (FBS) Satin Steel (SWS) $64.00 $70.00 STANDARD WITH STAINLESS STEEL DEADBOLTS Schlage Keyway Standard Door Prep and Installation Solid Brass ylinder Stainless Steel ollar and Rosette Hardened Steel Bolt Heavy Gauge Steel Understrike Stainless Steel Trim Strike Shipped with Every Deadbolt STAINLESS STEEL ROUND DEADBOLT Includes Extension ollar for Thin Doors Single ylinder S50001 Brushed Stainless Steel (SS) $64.00 Double ylinder S50002 $70.00 STAINLESS STEEL SQUARE DEADBOLT Includes Extension ollar for Thin Doors Single ylinder S50003 Brushed Stainless Steel (SS) $64.00 Double ylinder S50023 $70.00 Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 23/8 backset. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Backset + + Add Door Thickness to omments 83

84 SINGLE SIDED DEADBOLTS DEADBOLTS Operated by Thumbturn from Inside Only. No ylinder. STANDARD WITH SINGLE SIDED DEADBOLTS No Hardware Outside Thumbturn Inside Includes Deadbolt Mechanism and Strike Plate For Inside Installation and Appearance No ylinder or ollar Hardened Steel Bolt SINGLE SIDED DEADBOLTS Modern Square Modern Square Neos Satin Brass (US4) Polished Nickel - Lifetime (US14)** $42.00 Neos SINGLE SIDED DEADBOLTS Regular #8 Regular #8 Rectangular Wilshire Polished Nickel - Lifetime (US14) $42.00 Rectangular SINGLE SIDED DEADBOLTS Wilshire Saratoga Saratoga Quincy Rope Knoxville *** $42.00 Quincy SINGLE SIDED DEADBOLT Rope Knoxville Arts & rafts 8554 $42.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. **Polished Nickel - Lifetime (US14) NOT available for Neos Style. *** NOT available for Rope and Knoxville Styles. Arts & rafts Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 23/8 backset. Specify 23/4 backset if required. 84 To order: + Backset + + Add Door Thickness to omments

85 SINGLE SIDED DEADBOLTS #1 Sandcast Bronze #2 Sandcast Bronze Operated by Thumbturn from Inside Only. No ylinder. DEADBOLTS SINGLE SIDED DEADBOLTS #3 Sandcast Bronze #4 Sandcast Bronze #1 Sandcast Bronze #2 Sandcast Bronze #3 Sandcast Bronze #4 Sandcast Bronze $46.00 Tuscany Octagon SINGLE SIDED DEADBOLTS #11 Tuscany #14 Tuscany Tuscany Bronze Octagon #11 Tuscany Bronze $46.00 #14 Tuscany Bronze 8573 #1 Wrought Steel SINGLE SIDED DEADBOLTS #2 Wrought Steel #3 Wrought Steel #1 Wrought Steel #2 Wrought Steel #3 Wrought Steel Flat Black Steel (FBS) Satin Steel (SWS) $42.00 SINGLE SIDED DEADBOLTS Round Stainless Steel Square Stainless Steel Round Stainless Steel Square Stainless Steel S52005 S52006 Brushed Stainless Steel (SS) $42.00 Handing Not Required Standard door thickness of 13/4. Specify if thicker. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order: + Backset + + Add Door Thickness to omments 85

86 SIDEPLATE LOKSETS - BRASS TUBULAR SIDEPLATE LOKSETS Overall 7 MODERN 7 NON-KEYED Passage Privacy Knob or Lever Style See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $ Helios Lever with Non-Keyed Modern Plate Standard 2 1/8 door prep MODERN 35/8 -TO- KEYED Knob or Lever Style Overall 7 Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $ Bern Knob with Keyed Modern Plate Two standard 2 1/8 door preps 35/8 enter to enter hole spacing MODERN 9 NON-KEYED Knob or Lever Style Overall 9 Passage Privacy See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $ Bern Knob with Non-Keyed Modern Plate Standard 2 1/8 door prep MODERN 51/2 -TO- KEYED Knob or Lever Style Overall 9 Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $ INTERONNET DEVIE Geneva Lever with Keyed Modern Plate Two standard 2 1/8 door preps enter to enter hole spacing Modern 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. $58.00 *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 86 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

87 BRASS TUBULAR - SIDEPLATE LOKSETS Overall 7 1/8 Norwich Knob with Non-Keyed Quincy Plate Standard 2 1/8 door prep QUINY 71/8 NON-KEYED Passage Privacy Knob or Lever Style See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ SIDEPLATE LOKSETS QUINY 35/8 -TO- KEYED Knob or Lever Style Overall 7 1/8 Egg Knob with Keyed Quincy Plate Two standard 2 1/8 door preps 35/8 enter to enter hole spacing Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ QUINY 9 NON-KEYED Knob or Lever Style Overall 9 Passage Privacy See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ ortina Lever with Non-Keyed Quincy Plate Standard 2 1/8 door prep QUINY 51/2 -TO- KEYED Knob or Lever Style Overall 9 Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Milano Lever with Keyed Quincy Plate Two standard 2 1/8 door preps enter to enter hole spacing Quincy 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. $58.00 *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 87

88 SIDEPLATE LOKSETS - BRASS TUBULAR SIDEPLATE LOKSETS Overall 7 1/8 Passage 8016 See Page 6 & 7 for Brass Privacy 8026 See Page 7 for rystal 8006 & Porcelain Knob Options. Norwich Knob with Non-Keyed Delaware Plate Standard 2 1/8 door prep DELAWARE 71/8 NON-KEYED Knob or Lever Style $ $ $ DELAWARE 35/8 -TO- KEYED Knob or Lever Style Overall 7 1/8 Providence rystal Knob with Keyed Delaware Plate Two standard 2 1/8 door preps 35/8 enter to enter hole spacing Passage/Single Keyed Passage/Double Keyed DELAWARE 9 NON-KEYED See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Knob or Lever Style $ $ $ Overall 9 Passage Privacy See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ ortina Lever with Non-Keyed Delaware Plate Standard 2 1/8 door prep Overall 9 DELAWARE 51/2 -TO- KEYED Passage/Single Keyed Passage/Double Keyed Knob or Lever Style See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Delaware 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. $58.00 Waverly Knob with Keyed Delaware Plate Two standard 2 1/8 door preps enter to enter hole spacing *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 88 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

89 BRASS TUBULAR - SIDEPLATE LOKSETS Overall 7 1/8 ortina Lever with Non-Keyed olonial Plate Standard 2 1/8 door prep OLONIAL 71/8 NON-KEYED Passage Privacy Knob or Lever Style See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ SIDEPLATE LOKSETS OLONIAL 35/8 -TO- KEYED Knob or Lever Style Overall 7 1/8 Waverly Knob with Keyed olonial Plate Two standard 2 1/8 door preps 35/8 enter to enter hole spacing Passage/Single Keyed Passage/Double Keyed OLONIAL 9 NON-KEYED See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Knob or Lever Style $ $ $ Overall 9 Passage Privacy See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Providence Knob with Non-Keyed olonial Plate Standard 2 1/8 door prep OLONIAL 51/2 -TO- KEYED Knob or Lever Style Overall 9 Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Egg Knob with Keyed olonial Plate Two standard 2 1/8 door preps enter to enter hole spacing olonial 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. $58.00 Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 89

90 SIDEPLATE LOKSETS - BRASS TUBULAR SIDEPLATE LOKSETS Overall ROPE 71/2 NON-KEYED Passage Privacy Knob or Lever Style See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Rope Knob with Non-Keyed Rope Plate Standard 2 1/8 door prep ROPE 35/8 -TO- KEYED Knob or Lever Style Overall Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Rope Lever with Keyed Rope Plate Two standard 2 1/8 door preps 35/8 enter to enter hole spacing ROPE 95/8 NON-KEYED Knob or Lever Style Overall 9 5/8 Passage Privacy See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Turino Lever with Non-Keyed Rope Plate Standard 2 1/8 door prep ROPE 51/2 -TO- KEYED Knob or Lever Style Overall 9 5/8 Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Rope Knob with Keyed Rope Plate Two standard 2 1/8 door preps enter to enter hole spacing Rope 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. $58.00 Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 90 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

91 BRASS TUBULAR - SIDEPLATE LOKSETS Overall 7" OVAL BEADED 7 NON-KEYED Passage Privacy Knob or Lever Style See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ SIDEPLATE LOKSETS Astoria Knob with Non-Keyed Oval Beaded Plate Standard 2 1/8 door prep OVAL BEADED 35/8 -TO- KEYED Knob or Lever Style Overall 8 Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Beaded Egg Knob with Keyed Oval Beaded Plate Two standard 2 1/8 door preps 35/8 enter to enter hole spacing TRENTON 103/4 NON-KEYED Knob or Lever Style Overall 10 3/4 Passage Privacy See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Hampton Knob with Non-Keyed Trenton Plate Standard 2 1/8 door prep TRENTON 51/2 -TO- KEYED Knob or Lever Style Overall 10 3/4 Passage/Single Keyed Passage/Double Keyed INTERONNET DEVIE See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Trenton 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. $58.00 Rope Lever with Keyed Trenton Plate Two standard 2 1/8 door preps enter to enter hole spacing *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 91

92 SIDEPLATE LOKSETS - BRASS TUBULAR SIDEPLATE LOKSETS Overall BELMONT 71/2 NON-KEYED Passage Privacy Knob or Lever Style See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Georgetown rystal Knob with Non-Keyed Belmont Plate Standard 2 1/8 door prep BELMONT 35/8 -TO- KEYED Knob or Lever Style Overall Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Belmont Knob with Keyed Belmont Plate Two standard 2 1/8 door preps 35/8 enter to enter hole spacing VITORIA 73/4 NON-KEYED Knob or Lever Style Overall 7 3/4 Passage Privacy See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Victoria Knob with Non-Keyed Victoria Plate Standard 2 1/8 door prep VITORIA 35/8 -TO- KEYED Knob or Lever Style Overall 9 Passage/Single Keyed Passage/Double Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ Victoria Knob with Keyed Victoria Plate Two standard 2 1/8 door preps 3 5/8 enter to enter hole spacing *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 92 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

93 SANDAST BRONZE TUBULAR - SIDEPLATE LOKSETS MISSOULA 71/4 NON-KEYED Overall 7 1/4 Passage Privacy Knob or Lever Style See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ SIDEPLATE LOKSETS Lariat Lever with Non-Keyed Missoula Plate Standard 2 1/8 door prep MISSOULA 35/8 -TO- KEYED Knob or Lever Style Overall 7 1/4 Passage/Single Keyed Passage/Double Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ Winchester Knob with Keyed Missoula Plate Two standard 2 1/8 door preps 3 5/8 enter to enter hole spacing MISSOULA 9 NON-KEYED Knob or Lever Style Overall 9 Passage Privacy See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ Bronze Round Knob with Non-Keyed Missoula Plate Standard 2 1/8 door prep MISSOULA 51/2 -TO- KEYED Knob or Lever Style Overall 9 Passage/Single Keyed Passage/Double Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ Yuma Lever with Keyed Missoula Plate Two standard 2 1/8 door preps 5 1/2 enter to enter hole spacing INTERONNET DEVIE Missoula 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. $58.00 Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 93

94 SIDEPLATE LOKSETS - SANDAST BRONZE TUBULAR SIDEPLATE LOKSETS Overall 7 RETANGULAR 7 NON-KEYED Passage Privacy Knob or Lever Style See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ Bronze Egg Knob with Non-Keyed Rectangular Plate Standard 2 1/8 door prep RETANGULAR 35/8 -TO- KEYED Knob or Lever Style Overall 7 Passage/Single Keyed Passage/Double Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ Montrose Lever with Keyed Rectangular Plate Two standard 2 1/8 door preps 35/8 enter to enter hole spacing RETANGULAR 87/8 NON-KEYED Knob or Lever Style Overall 8 7/8 Passage Privacy See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ Teton Lever with Non-Keyed Rectangular Plate Standard 2 1/8 door prep RETANGULAR 51/2 -TO- KEYED Knob or Lever Style Overall 8 7/8 Passage/Single Keyed Passage/Double Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Butte Knob with Keyed Rectangular Plate Two standard 2 1/8 door preps enter to enter hole spacing Rectangular 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. $58.00 Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 94 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

95 SANDAST BRONZE TUBULAR - SIDEPLATE LOKSETS Overall #5 71/4 NON-KEYED Passage Privacy Knob or Lever Style See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ SIDEPLATE LOKSETS ody Lever with Non-Keyed #5 Plate Standard 2 1/8 door prep #5 35/8 -TO- KEYED Knob or Lever Style Overall 8 1/8 Passage/Single Keyed Passage/Double Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ Butte Knob with Keyed #5 Plate Two standard 2 1/8 door preps 35/8 enter to enter hole spacing #5 91/4 NON-KEYED Knob or Lever Style Overall 9 1/4 Passage Privacy See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ Butte Knob with Non-Keyed #5 Plate Standard 2 1/8 door prep #5 51/2 -TO- KEYED Knob or Lever Style Overall 10 Passage/Single Keyed Passage/Double Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE ody Lever with Keyed #5 Plate Two standard 2 1/8 door preps enter to enter hole spacing #5 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. $58.00 Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 95

96 SIDEPLATE LOKSETS - LOST WAX AST BRONZE TUBULAR SIDEPLATE LOKSETS Overall #16 81/4 NON-KEYED Passage Privacy Knob or Lever Style See Page 8 for Lost Wax ast Bronze Knob & Lever. See Page 7 for rystal & Porcelain Knob Options. $ $ $ Parma Knob with Non-Keyed #16 Plate Standard 2 1/8 door prep #16 35/8 -TO- KEYED Knob or Lever Style Overall Passage/Single Keyed Passage/Double Keyed See Page 8 for Lost Wax ast Bronze Knob & Lever. See Page 7 for rystal & Porcelain Knob Options. $ $ $ Napoli Lever with Keyed #16 Plate Two standard 2 1/8 door preps 3 5/8 enter to enter hole spacing #16 101/8 NON-KEYED Knob or Lever Style Overall 10 1/8 Passage Privacy See Page 8 for Lost Wax ast Bronze Knob & Lever. See Page 7 for rystal & Porcelain Knob Options. $ $ $ Medici Lever with Non-Keyed #16 Plate Standard 2 1/8 door prep #16 51/2 -TO- KEYED Knob or Lever Style Overall 10 1/8 Passage/Single Keyed Passage/Double Keyed See Page 8 for Lost Wax ast Bronze Knob & Lever. See Page 7 for rystal & Porcelain Knob Options. $ $ $ INTERONNET DEVIE Octagon Lever with Keyed #16 Plate Two standard 2 1/8 door preps enter to enter hole spacing #16 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. $58.00 Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 96 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

97 WROUGHT STEEL & STAINLESS STEEL TUBULAR - SIDEPLATE LOKSETS Overall 7 1/8 #5 WROUGHT STEEL 71/8 NON-KEYED Passage Privacy Knob or Lever Style See Page 8 for Wrought Steel Flat Black Steel (FBS) Satin Steel (SWS) $ $ SIDEPLATE LOKSETS 7055 $ Madison Ivory Knob with Non-Keyed #5 Wrought Steel Plate Standard 2 1/8 door prep #5 WROUGHT STEEL 35/8 -TO- KEYED Knob or Lever Style Overall 7 1/8 Passage/Single Keyed Passage/Double Keyed See Page 8 for Wrought Steel Flat Black Steel (FBS) Satin Steel (SWS) $ $ $ San arlos Lever with Keyed #5 Wrought Steel Plate Two standard 2 1/8 door preps 3 5/8 enter to enter hole spacing STAINLESS STEEL 8 NON-KEYED Knob or Lever Style Overall 8 Passage Privacy S801 S802 See Page 8 for Stainless Steel Brushed Stainless Steel (SS) $ $ S800 $ Hercules Lever with Non-Keyed Stainless Steel Plate Standard 2 1/8 door prep STAINLESS STEEL 51/2 -TO- KEYED Knob or Lever Style Passage/Single Keyed Passage/Double Keyed S811 S812 See Page 8 for Stainless Steel Brushed Stainless Steel (SS) $ $ Overall 9 S810 $ Helios Lever with Keyed Stainless Steel Plate Two standard 2 1/8 door preps enter to enter hole spacing INTERONNET DEVIE Stainless Steel 51/2 -to- Keyed 443 Not Available for Double ylinder. 28º Latch Not Available for Use with Interconnect Device. $58.00 Handing Required if Keyed Leversets or if Interconnect Device is Specified Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 97

98 SIDEPLATE LOKSETS - BRASS THUMBTURN PRIVAY SIDEPLATE LOKSETS Modern Plates with Round Knobs Exterior Interior THUMBTURN PRIVAY NON-KEYED STYLE Knob / Lever Style Modern Plate 33/8 enter to enter 8229 See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ Delaware Plates with Providence rystal Knobs olonial Plates with ortina Levers Quincy Plates with Egg Knobs Overall 7 1/8 -to- 3 3/8 Exterior Interior Exterior Interior Exterior Interior THUMBTURN PRIVAY NON-KEYED STYLE Knob / Lever Style Delaware Plate 33/8 enter to enter olonial Plate 33/8 enter to enter Quincy Plate 33/8 enter to enter See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required for Leversets Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. 98 To order: + Knob/Lever Style + Handing + + Add Door Thickness to omments

99 BRASS THUMBTURN PRIVAY - SIDEPLATE LOKSETS Belmont Plates with Belmont Knobs Victoria Plates with Elan Levers SIDEPLATE LOKSETS Exterior Interior Exterior Interior THUMBTURN PRIVAY NON-KEYED STYLE Knob / Lever Style Belmont Plate 33/8 enter to enter Victoria Plate 33/8 enter to enter 8224 See Page 6 & 7 for Brass $ See Page 7 for rystal 8225 & Porcelain Knob Options. $ Rope Plates with Rope Levers Oval Beaded Plates with Georgetown Knobs Exterior Interior Exterior Interior THUMBTURN PRIVAY NON-KEYED STYLE Knob / Lever Style Rope Plate 33/8 enter to enter Oval Beaded Plate 33/8 enter to enter 8223 See Page 6 & 7 for Brass $ See Page 7 for rystal 8227 & Porcelain Knob Options. $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required for Leversets Standard 2 1/8 door prep. Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch, add product code Latch28 and list price $4. To order: + Knob/Lever Style + Handing + + Add Door Thickness to omments 99

100 STRETTO NARROW TRIM LOKSETS STRETTO NARROW TRIM LOKSETS - 2 x 10, 11/2 x 11 STRETTO uses a tubular latch and is available for order in passage, thumb-turn privacy, keyed entry, and dummy functions. It can be paired with any Emtek knob or lever. The sleek design of the STRETTO requires a 1¼ diameter bore hole and a 2-hole door preparation for privacy thumb-turn and keyed configurations. Additional specifications for this truly unique design include: Supplied with a 28º Rotation latch. Available in 23/8 or 23/4 backset Trim sizes available are 2 x 10 or 11/2 x 11 STRETTO NON-KEYED PASSAGE STYLES 2 x 10 11/2 x 11 11/4 Dia. Bore 23/8 or 23/4 backset Exterior Interior Exterior Interior New Door Prep ONLY See Template for Door Prep Specification Narrow 1 1/4 Door Preps STRETTO THUMBTURN PRIVAY STYLES 11/4 Dia. 11/4 Bores Dia. Bores 2 x 10 11/2 x 11 33/8 Exterior Interior Exterior Interior New Door Prep ONLY See Template for Door Prep Specification Narrow 1 1/4 Door Preps, 3 3/8 enter to enter Hole Spacing Privacy Thumbturn STRETTO DUMMY STRETTO DUMMY PAIR STYLES SINGLE SIDED STYLES Available in both 10 and 11 Available in both 10 and 11 Exterior Interior New Door Prep ONLY See Template for Door Prep Exterior New Door Prep ONLY See Template for Door Prep STRETTO KEYED ENTRY STYLES 2 x 10 11/2 x 11 11/4 Dia. Bores 33/8 Exterior Interior New Door Prep ONLY See Template for Door Prep Specification 100 Exterior Interior Narrow 1 1/4 Door Preps, 3 3/8 enter to enter Hole Spacing Schlage Keyway (Available in Weiser Keyway)

101 10 STRETTO Thumbturn 10 2 x 10 MODERN RETANGULAR NON-KEYED Passage Thumbturn Privacy BRASS TUBULAR - STRETTO NARROW TRIM LOKSETS Knob or Lever Style See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $ STRETTO NARROW TRIM LOKSETS 2, Single Sided 8041 $ STRETTO Keyed Entry Set 2 x 10 MODERN RETANGULAR KEYED Knob or Lever Style Passage/Single Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ STRETTO Non-Keyed 11/2 x 11 MODERN RETANGULAR NON-KEYED Knob or Lever Style 11 Passage Thumbturn Privacy See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $ /2, Single Sided 8043 $ STRETTO Keyed Entry Set 11/2 x 11 MODERN RETANGULAR KEYED Knob or Lever Style Passage/Single Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required for Leversets Supplied with 28º Rotation latch. Standard backset is 23/8. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 101

102 STRETTO NARROW TRIM LOKSETS STRETTO NARROW TRIM LOKSETS - BRASS TUBULAR 10 STRETTO Non-Keyed x 10 ONORD NON-KEYED Passage Thumbturn Privacy, Single Sided Knob or Lever Style See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ $ STRETTO Keyed Entry Set 2 x 10 ONORD KEYED Knob or Lever Style Passage/Single Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ STRETTO Thumbturn 11/2 x 11 ONORD NON-KEYED Knob or Lever Style 11 Passage Thumbturn Privacy, Single Sided See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ $ $ /2 11 STRETTO Keyed Entry Set 11/2 x 11 ONORD KEYED Knob or Lever Style Passage/Single Keyed See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required for Leversets Supplied with 28º Rotation latch. Standard backset is 23/8. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 102 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

103 10 STRETTO Non-Keyed 10 2 x 10 ARHED NON-KEYED Passage Thumbturn Privacy SANDAST BRONZE TUBULAR - STRETTO NARROW TRIM LOKSETS Knob or Lever Style See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $ STRETTO NARROW TRIM LOKSETS 2, Single Sided 4041 $ STRETTO Keyed Entry Set 2 x 10 ARHED KEYED Knob or Lever Style Passage/Single Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ STRETTO Thumbturn 11/2 x 11 ARHED NON-KEYED Knob or Lever Style 11 Passage Thumbturn Privacy See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $180.00, Single Sided 4043 $ /2 11 STRETTO Keyed Entry Set 11/2 x 11 ARHED KEYED Knob or Lever Style Passage/Single Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ Handing Required for Leversets Supplied with 28º Rotation latch. Standard backset is 23/8. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 103

104 STRETTO NARROW TRIM LOKSETS STRETTO NARROW TRIM LOKSETS - SANDAST BRONZE TUBULAR 10 STRETTO Thumbturn 10 2 x 10 RETANGULAR NON-KEYED Passage Thumbturn Privacy Knob or Lever Style See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $180.00, Single Sided 5041 $ STRETTO Keyed Entry Set 2 x 10 RETANGULAR KEYED Knob or Lever Style Passage/Single Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ STRETTO Non-Keyed 11/2 x 11 RETANGULAR NON-KEYED Knob or Lever Style 11 Passage Thumbturn Privacy See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ $180.00, Single Sided 5043 $ /2 11 STRETTO Keyed Entry Set 11/2 x 11 RETANGULAR KEYED Knob or Lever Style Passage/Single Keyed See Page 7 for Sandcast Bronze Knob & Lever, rystal & Porcelain Knob Options. $ $ Handing Required for Leversets Supplied with 28º Rotation latch. Standard backset is 23/8. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 104 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

105 10 STRETTO Non-Keyed 10 2 x 10 TUSANY NON-KEYED Passage Thumbturn Privacy LOST WAX AST BRONZE TUBULAR - STRETTO NARROW TRIM LOKSETS Knob or Lever Style See Page 8 for Lost Wax ast Bronze See Page 7 for rystal & Porcelain Knob Options. $ $ $ STRETTO NARROW TRIM LOKSETS 2, Single Sided 6041 $ STRETTO Keyed Entry Set 2 x 10 TUSANY KEYED Knob or Lever Style Passage/Single Keyed 6442 See Page 8 for Lost Wax ast Bronze $ See Page 7 for rystal & Porcelain Knob Options. $ STRETTO Thumbturn 11/2 x 11 TUSANY NON-KEYED Knob or Lever Style 11 Passage Thumbturn Privacy See Page 8 for Lost Wax ast Bronze See Page 7 for rystal & Porcelain Knob Options. $ $ $180.00, Single Sided 6043 $ /2 11 STRETTO Keyed Entry Set 11/2 x 11 TUSANY KEYED Knob or Lever Style Passage/Single Keyed 6444 See Page 8 for Lost Wax ast Bronze $ See Page 7 for rystal & Porcelain Knob Options. $ Handing Required for Leversets Supplied with 28º Rotation latch. Standard backset is 23/8. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments 105

106 STRETTO NARROW TRIM LOKSETS STRETTO NARROW TRIM LOKSETS - STAINLESS STEEL TUBULAR 10 STRETTO Thumbturn 10 2 x 10 STAINLESS STEEL NON-KEYED Passage Thumbturn Privacy Knob or Lever Style See Page 8 for Stainless Steel Brushed Stainless Steel (SS) $ $ $162.00, Single Sided 9041 $ STRETTO Keyed Entry Set 2 x 10 STAINLESS STEEL KEYED Knob or Lever Style Passage/Single Keyed 9442 See Page 8 for Stainless Steel Brushed Stainless Steel (SS) $ $ STRETTO Non-Keyed 11/2 x 11 STAINLESS STEEL NON-KEYED Knob or Lever Style 11 Passage Thumbturn Privacy See Page 8 for Stainless Steel Brushed Stainless Steel (SS) $ $ $162.00, Single Sided 9043 $ /2 11 STRETTO Keyed Entry Set 11/2 x 11 STAINLESS STEEL KEYED Knob or Lever Style Passage/Single Keyed 9444 See Page 8 for Stainless Steel Brushed Stainless Steel (SS) $ $ Handing Required for Leversets Supplied with 28º Rotation latch. Standard backset is 23/8. Specify 23/4 backset if required. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. 106 To order: (W) + Knob/Lever Style + Handing + + Add Door Thickness to omments

107 11/2 x 5 STRETTO with Helios Levers BRASS PASSAGE & PRIVAY - STRETTO NARROW TRIM LOKSETS 11/2 x 5 STRETTO with Hercules Levers 11/2 x 5 STRETTO with Stuttgart Levers Set STRETTO NARROW TRIM LOKSETS 11/2 x 5 STRETTO with Modern Square rystal Knobs 11/2 x 5 STRETTO with Round Knobs 11/2 x 5 STRETTO with Modern Disc rystal Knobs Set 11/2 x 5 STRETTO Knob or Lever Style Passage Thumbturn Privacy See Page 6 & 7 for Brass See Page 7 for rystal & Porcelain Knob Options. Satin Brass (US4) $ $ $128.00, Single Sided 5005 $64.00 *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. IMPORTANT DOOR PREP INFORMATION 11/4 Dia. Bore 3/8 to be drilled first 11/4 Dia. Bore New Door Prep Only annot be combined with other rosette designs on opposite side of the door. Handing is required for Knob by Lever and split finish products. 3 1/2 23/8 or 23/4 backset 23/8 or 23/4 backset Handing Required for Leversets Requires a 11/4 diameter bore hole and 2-hole door preparation for thumbturn privacy. Standard backset is 23/8. Specify 23/4 backset if required. Supplied with 28º Rotation latch. omplete set includes latch and strike plate. To order: + Knob/Lever Style + Handing + + Add Door Thickness to omments 107

108 LEVERSETS - MODERN BRASS PASSAGE & PRIVAY Geneva Lever with Modern Rectangular Rosette Helios Lever with Disk Rosette Hercules Lever with Square Rosette Luzern Lever with Square Rosette Argos Lever with Modern Rectangular Rosette Stuttgart Lever with Square Rosette Rosette ROSETTE Product Description F Lever Style ode Standard F Modern Argos Lever (AG) Geneva Lever (GV) Helios Lever (HLO) Hercules Lever (HE) Luzern Lever (LU) Stuttgart Lever (STU) Satin Brass (US4) $ $ Disk Argos Lever (AG) Geneva Lever (GV) Helios Lever (HLO) Hercules Lever (HE) Luzern Lever (LU) Stuttgart Lever (STU) Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ Square Argos Lever (AG) Geneva Lever (GV) Helios Lever (HLO) Hercules Lever (HE) Luzern Lever (LU) Stuttgart Lever (STU) Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ Neos Argos Lever (AG) Geneva Lever (GV) Helios Lever (HLO) Hercules Lever (HE) Luzern Lever (LU) Stuttgart Lever (STU) Satin Brass (US4) $ $ Modern Rectangular Argos Lever (AG) Geneva Lever (GV) Helios Lever (HLO) Hercules Lever (HE) Luzern Lever (LU) Stuttgart Lever (STU) Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard leverset, add product code Latch28 and list price $4. Modern leversets may also be ordered with any Brass rosette at the list price shown above. See page for Brass rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 108 To order: () + Lever Style + Handing + + Add Door Thickness to omments

109 MODERN BRASS - LEVERSETS Basel Lever with Disk Rosette Triton Lever with Modern Rectangular Rosette Aireon Lever with Modern Rosette Poseidon Lever with Modern Rectangular Rosette PASSAGE & PRIVAY Sion Lever with Disk Rosette Athena Lever with Neos Rosette Mercury Lever with Square Rosette Hermes Lever with Modern Rosette Rosette ROSETTE Product Description F Lever Style ode Standard F Modern Aireon Lever (A) Athena Lever (ATN) Basel Lever (BA) Hermes Lever (HER) Mercury Lever (M) Poseidon Lever (POS) Sion Lever (SIO) Triton Lever (TRT) Satin Brass (US4) $ $ Disk Aireon Lever (A) Athena Lever (ATN) Basel Lever (BA) Hermes Lever (HER) Mercury Lever (M) Poseidon Lever (POS) Sion Lever (SIO) Triton Lever (TRT) Satin Brass (US4) $ $ Square Aireon Lever (A) Athena Lever (ATN) Basel Lever (BA) Hermes Lever (HER) Mercury Lever (M) Poseidon Lever (POS) Sion Lever (SIO) Triton Lever (TRT) Satin Brass (US4) $ $ Neos Aireon Lever (A) Athena Lever (ATN) Basel Lever (BA) Hermes Lever (HER) Mercury Lever (M) Poseidon Lever (POS) Sion Lever (SIO) Triton Lever (TRT) Satin Brass (US4) $ $ Modern Rectangular Aireon Lever (A) Athena Lever (ATN) Basel Lever (BA) Hermes Lever (HER) Mercury Lever (M) Poseidon Lever (POS) Sion Lever (SIO) Triton Lever (TRT) Satin Brass (US4) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard leverset, add product code Latch28 and list price $4. Modern leversets may also be ordered with any Brass rosette at the list price shown above. See page for Brass rosette options oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Lever Style + Handing + + Add Door Thickness to omments 109

110 KNOBSETS - MODERN BRASS PASSAGE & PRIVAY Bern Knob with Square Rosette Square Knob with Modern Rectangular Rosette Orb Knob with Disk Rosette Round Knob with Square Rosette Octagon Knob with Modern Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F Modern Bern Knob (BN) Octagon Knob (OT) Orb Knob (OR) Round Knob (ROU) Square Knob (SQU) Satin Brass (US4) $ $ Disk Bern Knob (BN) Octagon Knob (OT) Orb Knob (OR) Round Knob (ROU) Square Knob (SQU) Satin Brass (US4) Polished Nickel - Lifetime (US14)** $ $ Square Bern Knob (BN) Octagon Knob (OT) Orb Knob (OR) Round Knob (ROU) Square Knob (SQU) Satin Brass (US4) Polished Nickel - Lifetime (US14)** $ $ Neos Bern Knob (BN) Octagon Knob (OT) Orb Knob (OR) Round Knob (ROU) Square Knob (SQU) Satin Brass (US4) $ $ Modern Rectangular Bern Knob (BN) Octagon Knob (OT) Orb Knob (OR) Round Knob (ROU) Square Knob (SQU) Satin Brass (US4) Polished Nickel - Lifetime (US14)** $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. **Polished Nickel - Lifetime (US14) available only for Round Knob. Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. Modern knobsets may also be ordered with any Brass rosette at the list price shown above. See page for Brass rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 110 To order: () + Knob Style + + Add Door Thickness to omments

111 MODERN RYSTAL - KNOBSETS Bristol Knob with Square Rosette Modern Disc rystal Knob with Modern Rectangular Rosette Modern Square rystal Knob with Disk Rosette PASSAGE & PRIVAY Windsor rystal Knob with Modern Rectangular Rosette Modern Disc rystal Knob with Disk Rosette Hampton Knob with Neos Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F Modern Bristol rystal Knob (BL) Hampton rystal Knob (HT) Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Windsor rystal Knob (WS) Satin Brass (US4) $ $ Disk Bristol rystal Knob (BL) Hampton rystal Knob (HT) Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Windsor rystal Knob (WS) Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ Square Bristol rystal Knob (BL) Hampton rystal Knob (HT) Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Windsor rystal Knob (WS) Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ Neos Bristol rystal Knob (BL) Hampton rystal Knob (HT) Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Windsor rystal Knob (WS) Satin Brass (US4) $ $ Modern Rectangular Bristol rystal Knob (BL) Hampton rystal Knob (HT) Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Windsor rystal Knob (WS) Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. Modern rystal knobsets may also be ordered with any Brass rosette at the list price shown above. See page for Brass rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Knob Style + + Add Door Thickness to omments 111

112 LEVERSETS - LASSI BRASS PASSAGE & PRIVAY ortina Lever with #8 Rosette Milano Lever with Rectangular Rosette Rustic Lever with Oval Rosette Turino Lever with Quincy Rosette Rosette ROSETTE Product Description F Lever Style ode Standard F # ortina Lever () $92.00 Milano Lever (M) 8208 Rustic Lever (R) $92.00 Turino Lever (T) Polished Nickel - Lifetime (US14)** 8058 $92.00 Oval 8120 ortina Lever () $92.00 Milano Lever (M) 8220 Rustic Lever (R) $92.00 Turino Lever (T) 8520 $92.00 Regular 8100 ortina Lever () $92.00 Milano Lever (M) 8200 Rustic Lever (R) $92.00 Turino Lever (T) Polished Nickel - Lifetime (US14)** 8050 $92.00 Rectangular 8121 ortina Lever () $92.00 Milano Lever (M) 8221 Rustic Lever (R) $92.00 Turino Lever (T) Polished Nickel - Lifetime (US14)** 8521 $92.00 Quincy 8131 ortina Lever () $92.00 Milano Lever (M) 8231 Rustic Lever (R) $92.00 Turino Lever (T) 8531 $92.00 $ $ $ $ $ $ $ $ $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. **Polished Nickel - Lifetime (US14) available only for ortina, Milano and Turino Levers. Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard leverset, add product code Latch28 and list price $4. lassic leversets may also be ordered with any Modern rosette at the list price shown above. See page 108 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 112 To order: () + Lever Style + Handing + + Add Door Thickness to omments

113 LASSI BRASS - LEVERSETS ortina Lever with Regular Rosette Turino Lever with Lancaster Rosette ortina Lever with Ribbon & Reed Rosette PASSAGE & PRIVAY Turino Lever with Oval Rosette Milano Lever with Wilshire Rosette Rustic Lever with Rope Rosette Rosette ROSETTE Product Description F Lever Style ode Standard F Wilshire ortina Lever () Milano Lever (M) Rustic Lever (R) Turino Lever (T) Polished Nickel - Lifetime (US14)** $92.00 $92.00 $92.00 $ $ Rope ortina Lever () Milano Lever (M) Rustic Lever (R) Turino Lever (T) $92.00 $92.00 $92.00 $ $ Lancaster ortina Lever () Milano Lever (M) Rustic Lever (R) Turino Lever (T) $92.00 $92.00 $92.00 $ $ Ribbon & Reed ortina Lever () Milano Lever (M) Rustic Lever (R) Turino Lever (T) $92.00 $92.00 $92.00 $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. **Polished Nickel - Lifetime (US14) available only for ortina, Milano and Turino Levers. Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard leverset, add product code Latch28 and list price $4. lassic leversets may also be ordered with any Modern rosette at the list price shown above. See page 108 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Lever Style + Handing + + Add Door Thickness to omments 113

114 KNOBSETS - LASSI BRASS PASSAGE & PRIVAY Egg Knob with Regular Rosette Providence Knob with Quincy Rosette Norwich Knob with #8 Rosette Egg Knob with Rectangular Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F # Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) Polished Nickel - Lifetime (US14)** $98.00 $98.00 $98.00 $ $ Oval Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) $98.00 $98.00 $98.00 $ $ Regular Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) Polished Nickel - Lifetime (US14)** $98.00 $98.00 $98.00 $ $ Rectangular Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) Polished Nickel - Lifetime (US14)** $98.00 $98.00 $98.00 $ $ Quincy Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) $98.00 $98.00 $98.00 $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. **Polished Nickel - Lifetime (US14) NOT available for Melon Knob. Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. lassic knobsets may also be ordered with any Modern rosette at the list price shown above. See page 110 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 114 To order: () + Knob Style + + Add Door Thickness to omments

115 LASSI BRASS - KNOBSETS Waverly Knob with Quincy Rosette Norwich Knob with Wilshire Rosette Providence Knob with Regular Rosette PASSAGE & PRIVAY Egg Knob with Oval Rosette Waverly Knob with Lancaster Rosette Melon Knob with Rope Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F Wilshire Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) Polished Nickel - Lifetime (US14)** $98.00 $98.00 $98.00 $ $ Rope Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) $98.00 $98.00 $98.00 $ $ Lancaster Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) $98.00 $98.00 $98.00 $ $ Ribbon & Reed Egg Knob (E) Melon Knob (MN) Norwich Knob (NW) Providence Knob (P) Waverly Knob (W) $98.00 $98.00 $98.00 $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. **Polished Nickel - Lifetime (US14) NOT available for Melon Knob. Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. lassic knobsets may also be ordered with any Modern rosette at the list price shown above. See page 110 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Knob Style + + Add Door Thickness to omments 115

116 LEVERSETS - DESIGNER BRASS PASSAGE & PRIVAY Elan Lever with #8 Rosette Wembley Lever with Lancaster Rosette Merrimack Lever with Rectangular Rosette oventry Lever with Regular Rosette Rosette ROSETTE Product Description F Lever Style ode Standard F # oventry Lever (V) Elan Lever (EN) Merrimack Lever (ME) Ribbon & Reed Lever (RBL) Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) Polished Nickel - Lifetime (US14)** $ $ Oval oventry Lever (V) Elan Lever (EN) Merrimack Lever (ME) Ribbon & Reed Lever (RBL) Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) $ $ Regular oventry Lever (V) Elan Lever (EN) Merrimack Lever (ME) Ribbon & Reed Lever (RBL) Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) Polished Nickel - Lifetime (US14)** $ $ Rectangular oventry Lever (V) Elan Lever (EN) Merrimack Lever (ME) Ribbon & Reed Lever (RBL) Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) Polished Nickel - Lifetime (US14)** $ $ Quincy oventry Lever (V) Elan Lever (EN) Merrimack Lever (ME) Ribbon & Reed Lever (RBL) Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. **Polished Nickel - Lifetime (US14) available only for Merrimack Lever. Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard leverset, add product code Latch28 and list price $4. Designer leversets may also be ordered with any Modern rosette at the list price shown above. See page 108 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 116 To order: () + Lever Style + Handing + + Add Door Thickness to omments

117 DESIGNER BRASS - LEVERSETS Rope Lever with Rope Rosette Merrimack Lever with Quincy Rosette Ribbon & Reed Lever with Ribbon & Reed Rosette PASSAGE & PRIVAY Elan Lever with Oval Rosette Santa Fe Lever with Wilshire Rosette Elan Lever with Regular Rosette Rosette ROSETTE Product Description F Lever Style ode Standard F Wilshire oventry Lever (V) Elan Lever (EN) Merrimack Lever (ME) Ribbon & Reed Lever (RBL) Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) Polished Nickel - Lifetime (US14)** $ $ Rope 8101 oventry Lever (V) Elan Lever (EN) 8201 Merrimack Lever (ME) Ribbon & Reed Lever (RBL) 8051 Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) Lancaster 8106 oventry Lever (V) Elan Lever (EN) 8206 Merrimack Lever (ME) Ribbon & Reed Lever (RBL) 8056 Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) $ $ $ $ Ribbon & Reed 8107 oventry Lever (V) Elan Lever (EN) 8207 Merrimack Lever (ME) Ribbon & Reed Lever (RBL) 8057 Rope Lever (RL) Santa Fe Lever (SF) Wembley Lever (WM) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. **Polished Nickel - Lifetime (US14) available only for Merrimack Lever. Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard leverset, add product code Latch28 and list price $4. Designer leversets may also be ordered with any Modern rosette at the list price shown above. See page 108 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Lever Style + Handing + + Add Door Thickness to omments 117

118 KNOBSETS - DESIGNER BRASS PASSAGE & PRIVAY Beaded Egg Knob with Regular Rosette Lancaster Knob with Lancaster Rosette Ribbon & Reed Knob with Rectangular Rosette Victoria Knob with Oval Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F # Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) $ $ Oval Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) $ $ Regular Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) $ $ Rectangular Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) $ $ Quincy Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. Designer knobsets may also be ordered with any Modern rosette at the list price shown above. See page 110 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 118 To order: () + Knob Style + + Add Door Thickness to omments

119 DESIGNER BRASS - KNOBSETS Rope Knob with Rope Rosette Belmont Knob with Quincy Rosette Lancaster Knob with #8 Rosette PASSAGE & PRIVAY Belmont Knob with Wilshire Rosette Beaded Egg Knob with Oval Rosette Ribbon & Reed Knob with Ribbon & Reed Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F Wilshire Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) $ $ Rope Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) $ $ Lancaster Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) $ $ Ribbon & Reed Beaded Egg Knob (BE) Belmont Knob (BT) Lancaster Knob (LN) Ribbon & Reed Knob (RBK) Rope Knob (RK) Victoria Knob (V) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. Designer knobsets may also be ordered with any Modern rosette at the list price shown above. See page 110 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Knob Style + + Add Door Thickness to omments 119

120 KNOBSETS - RYSTAL PASSAGE & PRIVAY Old Town lear Knob with #8 Rosette Bristol Knob with Rectangular Rosette Old Town lear Knob with Wilshire Rosette Providence rystal Knob with Quincy Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F # Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) Polished Nickel - Lifetime (US14) $ $ Oval Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ Regular Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) Polished Nickel - Lifetime (US14) $ $ Rectangular Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) Polished Nickel - Lifetime (US14) $ $ Quincy Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. rystal knobsets may also be ordered with any Modern rosette at the list price shown above. See page 111 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 120 To order: () + Knob Style + + Add Door Thickness to omments

121 RYSTAL - KNOBSETS Astoria lear Knob with Rope Rosette Georgetown Knob with Wilshire Rosette Hampton Knob with #8 Rosette PASSAGE & PRIVAY Diamond rystal Knob with Lancaster Rosette Lowell rystal Knob with Quincy Rosette Windsor rystal Knob with Rectangular Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F Wilshire Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) Polished Nickel - Lifetime (US14) $ $ Rope Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ Lancaster Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ Ribbon & Reed Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. rystal knobsets may also be ordered with any Modern rosette at the list price shown above. See page 111 for Modern rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Knob Style + + Add Door Thickness to omments 121

122 KNOBSETS - PORELAIN PASSAGE & PRIVAY Ice White Knob with Porcelain Rosette Ebony Knob with Porcelain Rosette PORELAIN KNOBS WITH Rosette PORELAIN ROSETTE Description Product ode Knob Style (for enter Ring in Rosette) Standard Porcelain Ebony Knob (EB) Ice White Knob (IW) $98.00 $98.00 $98.00 >> F Mechanism NOT available for Porcelain Style Rosettes. Ebony Knob with Ribbon & Reed Rosette Ice White Knob with Oval Rosette Ebony Knob with #8 Brass Rosette PORELAIN KNOBS WITH Rosette BRASS ROSETTES F Knob Style Standard F See page 110 for Modern Brass Rosette product codes. See page for Brass Rosette product codes. Ebony Knob (EB) Ice White Knob (IW) $98.00 $98.00 $98.00 $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. omplete set includes latch and strike plate. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 122 To order: () + Knob Style + + Add Door Thickness to omments

123 ARTS & RAFTS - LEVERSETS & KNOBSETS Arts & rafts Lever with Arts & rafts Rectangular Rosette Hammered Lever with Hammered Rosette Hammered Egg Knob with Arts & rafts Rectangular Rosette PASSAGE & PRIVAY Arts & rafts Lever with Hammered Rosette Hammered Lever with Arts & rafts Rectangular Rosette Hammered Egg Knob with Hammered Rosette Rosette ROSETTE Product Description F Knob or Lever Style ode Standard F Arts & rafts Hammered Egg Knob (HE) Arts & rafts Lever (A) Hammered Lever (HM) $ $ Hammered Hammered Egg Knob (HE) Arts & rafts Lever (A) Hammered Lever (HM) $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order 28º Rotation latch with any standard knobset/leverset, add product code Latch28 and list price $4. Arts & rafts leversets/knobsets may also be ordered with any Modern or Brass rosette at the list price shown above. See page 108, for Modern or Brass rosette options. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Knob/Lever Style + Handing + + Add Door Thickness to omments 123

124 THUMBTURN PRIVAY LOKSETS - USE WITH BRASS PASSAGE SET PASSAGE & PRIVAY Helios Leverset with Thumbturn Exterior Interior MODERN THUMBTURN PRIVAY LOKSET Use with any Modern Brass passage set 818TP Satin Brass (US4) Polished Nickel - Lifetime (US14) $22.00 >> Knob/Lever Lockset sold separately. ortina Leverset with Thumbturn Exterior Interior LASSI THUMBTURN PRIVAY LOKSET Use with any lassic Brass or Designer Brass passage set 828TP Polished Nickel - Lifetime (US14) $22.00 >> Knob/Lever Lockset sold separately. Handing Required for Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. Thumbturn Privacy can be used with any Brass passage set. *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. 124 To order: + + Add Door Thickness to omments

125 RYSTAL & PORELAIN - DOOR KNOB WITH THREADED SPINDLE Threaded Rod with Old Town lear Knobs Threaded Rod with Diamond rystal Knobs Threaded Rod with Astoria lear Knobs Threaded Rod with Georgetown Knobs PASSAGE & PRIVAY Threaded Rod with Providence rystal Knobs Threaded Rod with Bristol Knobs Threaded Rod with Hampton Knobs Threaded Rod with Ice White Porcelain Knobs Threaded Rod with Modern Disc rystal Knobs Threaded Rod with Modern Square rystal Knobs Two Knobs Per Set Any Knob Shown Above One Square Threaded Rod Per Set 31/2 3/8-20 Threads Per Inch RYSTAL KNOBS Rosette WITH THREADED ROD Product ode Knob Style Standard Two Knobs Per Set 8000 Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) Satin Brass (US4)** Polished Nickel - Lifetime (US14) $92.00 ** Satin Brass (US4) available for select Modern rystal knobs. PORELAIN KNOBS Rosette WITH THREADED ROD Product ode Knob Style Standard Two Knobs Per Set 8000 Ebony Knob (EB) Ice White Knob (IW) $92.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. To order: + Knob Style + + Add Door Thickness to omments 125

126 LEVERSETS - SANDAST BRONZE PASSAGE & PRIVAY Yuma Lever with #6 Rosette Durango Lever with #1 Rosette Montrose Lever with #3 Rosette ody Lever with #2 Rosette Lariat Lever with #4 Rosette Teton Lever with #4 Rosette imarron Lever with #2 Rosette Aurora Lever with #6 Rosette Rosette ROSETTE Product Description F Lever Style ode Standard F # Aurora Lever (AR) imarron Lever (R) ody Lever (D) Durango Lever (D) Lariat Lever (LR) Montrose Lever (MT) Teton Lever (TT) Yuma Lever (YM) $ $ $ $ $ # Aurora Lever (AR) imarron Lever (R) ody Lever (D) Durango Lever (D) Lariat Lever (LR) Montrose Lever (MT) Teton Lever (TT) Yuma Lever (YM) $ $ $ $ $ # Aurora Lever (AR) imarron Lever (R) ody Lever (D) Durango Lever (D) Lariat Lever (LR) Montrose Lever (MT) Teton Lever (TT) Yuma Lever (YM) $ $ $ $ $ # Aurora Lever (AR) imarron Lever (R) ody Lever (D) Durango Lever (D) Lariat Lever (LR) Montrose Lever (MT) Teton Lever (TT) Yuma Lever (YM) $ $ $ $ $ # Aurora Lever (AR) imarron Lever (R) ody Lever (D) Durango Lever (D) Lariat Lever (LR) Montrose Lever (MT) Teton Lever (TT) Yuma Lever (YM) $ $ $ $ $ Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch with any standard leverset, add product code Latch28 and list price $4. omplete set includes latch and strike plate. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Lever Style + Handing + + Add Door Thickness to omments

127 SANDAST BRONZE - KNOBSETS Butte Knob with #4 Rosette Round Knob with #6 Rosette Winchester Knob with #3 Rosette Egg Knob with #2 Rosette PASSAGE & PRIVAY Butte Knob with #1 Rosette Winchester Knob with #2 Rosette Egg Knob with #4 Rosette Round Knob with #6 Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F # Butte Knob (BU) Egg Knob (BZEG) Round Knob (BZRN) Winchester Knob (W) $ $ $ $ $ # Butte Knob (BU) Egg Knob (BZEG) Round Knob (BZRN) Winchester Knob (W) $ $ $ $ $ # Butte Knob (BU) Egg Knob (BZEG) Round Knob (BZRN) Winchester Knob (W) $ $ $ $ $ # Butte Knob (BU) Egg Knob (BZEG) Round Knob (BZRN) Winchester Knob (W) $ $ $ $ $ # Butte Knob (BU) Egg Knob (BZEG) Round Knob (BZRN) Winchester Knob (W) $ $ $ $ $ Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. omplete set includes latch and strike plate. To order: () + Knob Style + + Add Door Thickness to omments oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 127

128 KNOBSETS - RYSTAL PASSAGE & PRIVAY Hampton Knob with #1 Rosette Lowell rystal Knob with #4 Rosette Astoria Knob with #6 Rosette Diamond rystal Knob with #3 Rosette Georgetown Knob with #4 Rosette Bristol Knob with #2 Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F # Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) $ $ $ $ $ # Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) $ $ $ $ $ # Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) $ $ $ $ $ # Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) $ $ $ $ $ # Astoria lear Knob (AS) Bristol Knob (BL) Diamond rystal Knob (K) Georgetown Knob (GT) Hampton Knob (HT) Lowell rystal Knob (LW) $ $ $ $ $ Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. omplete set includes latch and strike plate. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 128 To order: () + Knob Style + + Add Door Thickness to omments

129 RYSTAL - KNOBSETS Providence rystal Knob with #2 Rosette Modern Disc rystal Knob with #6 Rosette Old Town lear rystal Knob with #1 Rosette PASSAGE & PRIVAY Windsor rystal Knob with #1 Rosette Providence rystal Knob with #3 Rosette Modern Square rystal Knob with #3 Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F # Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ $ $ $ # Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ $ $ $ # Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ $ $ $ # Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ $ $ $ # Modern Disc rystal Knob (MD) Modern Square rystal Knob (MS) Old Town lear Knob (OT) Providence rystal Knob (P) Windsor rystal Knob (WS) $ $ $ $ $ Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. omplete set includes latch and strike plate. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Knob Style + + Add Door Thickness to omments 129

130 LEVERSETS - LOST WAX AST BRONZE PASSAGE & PRIVAY Medici Lever with #14 Rosette Napoli Lever with #12 Rosette Octagon Lever with #11 Rosette Padua Lever with #11 Rosette Octagon Lever with #15 Rosette Medici Lever with #12 Rosette Rosette ROSETTE Product Description F Lever Style ode Standard F # Medici Lever (MDI) Napoli Lever (NA) Octagon Lever (OL) Padua Lever (PD) $ $ $ $ $ # Medici Lever (MDI) Napoli Lever (NA) Octagon Lever (OL) Padua Lever (PD) $ $ $ $ $ # Medici Lever (MDI) Napoli Lever (NA) Octagon Lever (OL) Padua Lever (PD) $ $ $ $ $ # Medici Lever (MDI) Napoli Lever (NA) Octagon Lever (OL) Padua Lever (PD) $ $ $ $ $ Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch with any standard leverset, add product code Latch28 and list price $4. omplete set includes latch and strike plate. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 130 To order: () + Lever Style + Handing + + Add Door Thickness to omments

131 LOST WAX AST BRONZE - KNOBSETS Petal Knob with #12 Rosette Octagon Knob with #11 Rosette Parma Knob with #14 Rosette PASSAGE & PRIVAY Octagon Knob with #15 Rosette Parma Knob with #12 Rosette Petal Knob with #11 Rosette Rosette ROSETTE Product Description F Knob Style ode Standard F # Octagon Knob (OK) Parma Knob (PA) Petal Knob (PT) $ $ $ $ $ # Octagon Knob (OK) Parma Knob (PA) Petal Knob (PT) $ $ $ $ $ # Octagon Knob (OK) Parma Knob (PA) Petal Knob (PT) $ $ $ $ $ # Octagon Knob (OK) Parma Knob (PA) Petal Knob (PT) $ $ $ $ $ Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. omplete set includes latch and strike plate. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. To order: () + Knob Style + + Add Door Thickness to omments 131

132 LEVERSETS - WROUGHT STEEL PASSAGE & PRIVAY San arlos Lever with #2 Rosette Normandy Lever with #2 Rosette San arlos Lever with #3 Rosette Lafayette Lever with #1 Rosette San arlos Lever with #1 Rosette Lafayette Lever with #3 Rosette Rosette ROSETTE Product Description Lever Style ode Standard # Lafayette Lever (L) Normandy Lever (N) San arlos Lever (S) Flat Black Steel (FBS) Satin Steel (SWS) $92.00 $ $92.00 # Lafayette Lever (L) Normandy Lever (N) San arlos Lever (S) Flat Black Steel (FBS) Satin Steel (SWS) $92.00 $ $92.00 # Lafayette Lever (L) Normandy Lever (N) San arlos Lever (S) Flat Black Steel (FBS) Satin Steel (SWS) $92.00 $ $92.00 Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch with any standard leverset, add product code Latch28 and list price $4. omplete set includes latch and strike plate. F Mechanism NOT available for Wrought Steel products. 132 To order: + Lever Style + Handing + + Add Door Thickness to omments

133 WROUGHT STEEL - KNOBSETS Savannah Knob with #3 Rosette Madison Ivory Knob with #1 Rosette Jamestown Knob with #1 Rosette PASSAGE & PRIVAY Jamestown Knob with #3 Rosette Savannah Knob with #1 Rosette Madison Black Knob with #2 Rosette Rosette ROSETTE Product Description Knob Style ode Standard # Jamestown Knob (J) Madison Black Knob (MB) Madison Ivory Knob (MI) Savannah Knob (SV) Flat Black Steel (FBS) Satin Steel (SWS) $98.00 $98.00 $98.00 # Jamestown Knob (J) Madison Black Knob (MB) Madison Ivory Knob (MI) Savannah Knob (SV) Flat Black Steel (FBS) Satin Steel (SWS) $98.00 $98.00 $98.00 # Jamestown Knob (J) Madison Black Knob (MB) Madison Ivory Knob (MI) Savannah Knob (SV) Flat Black Steel (FBS) Satin Steel (SWS) $98.00 $98.00 $98.00 Handing Not Required For Knobsets Standard latch is for 23/8 backset. Specify 23/4 backset if required. To order 28º Rotation latch with any standard knobset, add product code Latch28 and list price $4. omplete set includes latch and strike plate. F Mechanism NOT available for Wrought Steel products. To order: + Knob Style + + Add Door Thickness to omments 133

134 LEVERSETS & KNOBSETS - STAINLESS STEEL PASSAGE & PRIVAY ologne Lever with Disk Rosette Dresden Lever with Square Rosette Kiel Lever with Beveled Rosette Stuttgart Lever with Disk Rosette TUBULAR STAINLESS Rosette STEEL LEVERSETS F Product ode Rosette Style Lever Style Standard F S100 S200 S300 Beveled (01) Disk (02) Square (03) ologne Lever (O) Dresden Lever (DD) Kiel Lever (KL) Stuttgart Lever (STT) Brushed Stainless Steel (SS) $86.00 $86.00 $86.00 $ $ Athena Lever with Square Rosette Hercules Lever with Disk Rosette Hermes Lever with Beveled Rosette Poseidon Lever with Disk Rosette Helios Lever with Square Rosette AST STAINLESS STEEL Rosette LEVERSETS F Product ode Rosette Style Lever Style Standard F S100 S200 S300 Beveled (01) Disk (02) Square (03) Athena Lever (AT) Hercules Lever (HS) Helios Lever (HL) Hermes Lever (HES) Poseidon Lever (PO) Brushed Stainless Steel (SS) $ $ $ $ $ Octagon Knob with Beveled Rosette Round Knob with Disk Rosette Octagon Knob with Square Rosette AST STAINLESS STEEL Rosette KNOBSETS F Product ode Rosette Style Knob Style Standard F S100 S200 Beveled (01) Disk (02) Square (03) Octagon Knob (OK) Round Knob (RNK) Brushed Stainless Steel (SS) $ $ $ $ S300 $ Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. Supplied with a 28º Rotation latch. omplete set includes latch and strike plate. oncealed Fastener (F) Mechanism Rosettes have no exposed screws. Handing not required, except for Knob by Lever and split finish products. Door thickness for F Mechanism is 13/8 to 15/8. Specify if thicker. Supplied with a 28º Rotation latch. 134 To order: () + Knob/Lever Style + Handing + + Add Door Thickness to omments

135 TUBULAR ENTRY SET - ONTEMPORARY OLOR OLLETION FEATURES AND TEHNIAL SPEIFIATIONS: hoose from seven different colored inserts. Use all one color or your own creative combination (For example: aribbean Blue for exterior trim / Graphite Grey for interior trim) olor inserts are permanently affixed to the hardware once ordered. ontemporary olor ollection hardware cannot be combined with other Emtek knobs, levers or rosettes. ontemporary olor ollection hardware is available in split style option when it is ordered with other Emtek products. Each style would be mounted on the opposite side of the door. The price of the higher cost product will be charged. OLOR OLLETION Martinique Trim olor Insert Options Pearl White (WE) Onyx Black (BK) Sea Glass Green (GN) aribbean Blue (BE) Graphite Grey (GY) alypso Silver (SR) Hibiscus Red (RD) MARTINIQUE TUBULAR ENTRY SET Lever Style for Inside Trim olor Insert Single ylinder Double ylinder L4820 L4830 L4810 Aruba Lever (AB) ayman Lever (M) aribbean Blue (BE) Onyx Black (BK) Sea Glass Green (GN) Graphite Grey (GY) Hibiscus Red (RD) alypso Silver (SR) Pearl White (WE) $ $ $ Handing Required For Orders Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. 28º Rotation latch NOT available for use with ontemporary olor ollection products. Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. To order: (W) + Backset + Lever Style + Handing + olor Insert + Add Door Thickness to omments 135

136 ONTEMPORARY OLOR OLLETION - DEADBOLTS & LEVERSETS OLOR OLLETION MARTINIQUE DEADBOLT Includes Extension ollar for Thin Doors Single ylinder Deadbolt Double ylinder Deadbolt L8469 L8369 olor Insert aribbean Blue (BE) Onyx Black (BK) Sea Glass Green (GN) Graphite Grey (GY) Hibiscus Red (RD) alypso Silver (SR) Pearl White (WE) $44.00 $48.00 Weiser (WR5) Keyway Specify by adding W to the beginning of product code. No upcharge for cylinder substitution. an be keyed into existing Weiser system. MARTINIQUE SINGLE SIDED DEADBOLT olor Insert Nothing Outside Thumbturn Inside Single Sided Deadbolt L8569 aribbean Blue (BE) Onyx Black (BK) Sea Glass Green (GN) Graphite Grey (GY) Hibiscus Red (RD) alypso Silver (SR) Pearl White (WE) $32.00 Handing NOT Required. Standard door thickness of 13/4. Specify if thicker. Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. To order: (W) + Backset + olor Insert + Add Door Thickness to omments ayman Lever with Sea Glass Green olor Insert Trinidad Rosette ayman Lever with Graphite Grey olor Insert Trinidad Rosette ayman Lever with alypso Silver olor Insert Trinidad Rosette Aruba Lever with aribbean Blue olor Insert Trinidad Rosette Aruba Lever with Hibiscus Red olor Insert Trinidad Rosette TRINIDAD Description Lever Style olor Insert L5110 L5210 L5050 Aruba Lever (AB) ayman Lever (M) aribbean Blue (BE) Onyx Black (BK) Sea Glass Green (GN) Graphite Grey (GY) Hibiscus Red (RD) alypso Silver (SR) Pearl White (WE) $62.00 $62.00 $62.00 Handing Required For Leversets Standard latch is for 23/8 backset. Specify 23/4 backset if required. omplete set includes latch and strike plate. 28º Rotation latch NOT available for use with ontemporary olor ollection products. 136 To order: + Backset + Lever Style + Handing + olor Insert + Add Door Thickness to omments

137 BAK TO BAK PULLS Standard Appliance and Door Pulls DOOR PULLS Appliance/Door pulls are drilled and tapped for 3/8-16 thread to accommodate thread adapters. Supplied with: Two- Thread adapter for ¼-20 thread Two- ¼-20 Flat head machine screws x 1 long Two- Thread adapters for thread Two Flat head machine screws x 1 long Two Flat head machine screws x 2 long Two- Threaded Washers Two- Decorative aps Back to Back Appliance and Door Pulls Most standard appliance pulls and door pulls are available in Back to Back function. Fits door thickness from 13/8" to 2¼". Specify if thicker. Supplied with: One grip with threads in the stem One mating grip with 3/8 diameter hole in the stem Two 3/8 diameter bevel head screws with shaft by 21/2 long Two set screws HOW TO ORDER Add FUNTION to the, and. For example: BTB US10B Function Door Pull 137

138 APPLIANE PULLS DOOR PULLS Bauhaus Appliance Pull Trail Appliance Pull Trinity Appliance Pull Bar Appliance Pull Alexander Appliance Pull 12 -to- 12" & 18" APPLIANE PULLS Back To Back Back To Back Bauhaus Trail 12" Appliance Pull 18" Appliance Pull 12" Appliance Pull 18" Appliance Pull BTB BTB BTB BTB Satin Brass (US4) Polished Nickel (US14) $ $ $ $ $ $ $ $ Trinity** 12" Appliance Pull BTB $ $ " Appliance Pull BTB $ $ Bar 12" Appliance Pull BTB $ $ " Appliance Pull BTB $ $ Alexander** 12" Appliance Pull BTB $ $ " Appliance Pull BTB $ $ *Unlacquered Brass (US3NL) finish available for a $20 upcharge per Door/Appliance pull and Back to Back pulls are available for a $40 upcharge per pair. **Unlacquered Brass (US3NL) NOT available for Trinity and Alexander Appliance pulls. 138 To order: (BTB) + + Add Door Thickness to omments

139 APPLIANE PULLS Spindle Appliance Pull Rail Sandcast Bronze Appliance Pull Fluted Lost Wax ast Bronze Appliance Pull DOOR PULLS 18 -to- 12" & 18" APPLIANE PULLS Back To Back Back To Back Spindle 12" Appliance Pull 18" Appliance Pull BTB BTB Polished Brass (US3) Polished Nickel (US14) $ $ $ $ Rail Sandcast Bronze 12" Appliance Pull 18" Appliance Pull BTB BTB $ $ $ $ Fluted Lost Wax ast Bronze 12" Appliance Pull 18" Appliance Pull BTB BTB $ $ $ $ *Unlacquered Brass (US3NL) finish available for a $20 upcharge per Door/Appliance pull and Back to Back pulls are available for a $40 upcharge per pair. To order: (BTB) + + Add Door Thickness to omments 139

140 DOOR PULLS - SOLID BRASS & STAINLESS STEEL DOOR PULLS Wilshire Knoxville Ribbon & Reed Arts & rafts 8 -to- Baden Brisbane Zeus Baden Stainless Steel Zeus Stainless Steel BRASS & STAINLESS STEEL 8" DOOR PULLS May Be Used Separately or With Pull Plates Back To Back Back To Back Wilshire 8" Door Pull BTB Polished Nickel - Lifetime (US14) $92.00 $ Knoxville 8" Door Pull Ribbon & Reed 8" Door Pull BTB BTB $92.00 $92.00 $ $ Arts & rafts 8" Door Pull BTB $92.00 $ Baden 8" Door Pull Brisbane 8" Door Pull Zeus 8" Door Pull BTB BTB BTB Satin Brass (US4)** Polished Nickel - Lifetime (US14)** $92.00 $92.00 $92.00 $ $ $ Baden Stainless Steel 8" Door Pull BTB S86002 Brushed Stainless Steel (SS) $92.00 $ Zeus Stainless Steel 8" Door Pull BTB S86001 $92.00 $ *Unlacquered Brass (US3NL) finish available for a $20 upcharge per Door/Appliance Pull and Back to Back pulls are available for a $40 upcharge per pair. **Polished Nickel - Lifetime (US14) and Satin Brass (US4) are available only for Baden Door Pull. 140 To order: (BTB) + + Add Door Thickness to omments

141 SOLID BRASS - PUSH & PULL PLATES Modern Push Plate Modern Pull Plate (Plate Only) Drilled to accept 8 pull Example: ombination of 8 Baden Pull and 3 W x 12 H Modern Pull Plate DOOR PULLS 12 8 MODERN PUSH & PULL PLATES Supplied with 4 Wood Screws Modern Push Plate Modern Pull Plate Satin Brass (US4) Polished Nickel - Lifetime (US14) $66.00 (Plate Only) $66.00 (Plate Only) Knoxville Push Plate Knoxville Pull Plate (Plate Only) Drilled to accept 8 pull Example: ombination of 8 Knoxville Pull and 3 W x 12 H Knoxville Pull Plate 12 8 KNOXVILLE PUSH & PULL PLATES Supplied with 4 Wood Screws Knoxville Push Plate Knoxville Pull Plate $66.00 (Plate Only) $66.00 (Plate Only) *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Pull plates and pulls must be ordered separately. To order: + + Add Door Thickness to omments 141

142 DOOR PULLS - SANDAST BRONZE DOOR PULLS Rustic Modern Rod 12 Rod 18 Rod Supplied with #10 Wood Screws 8 -to- 8 -to- 12 -to- 133/4 Overall 15 -to- 18 Overall Nunez Twig 8 -to- 8 -to- SANDAST BRONZE DOOR PULLS 8", 12", and 18" Back To Back Back To Back Rustic Modern Bronze 8" Pull Nunez Bronze 8" Pull BTB BTB $ $ $ $ Twig Bronze 8" Pull BTB $ $ Rod Bronze 8" Pull BTB $ $ Rod Bronze 12" Pull BTB $ $ Rod Bronze 18" Pull $ To order: (BTB) + + Add Door Thickness to omments

143 LOST WAX AST BRONZE - DOOR PULLS Twist Palermo Art Nouveau Supplied with 1-1/16" Threaded Tube DOOR PULLS 8 -to- 8 -to- 8 -to- olumn Recoleta Left Hand Right Hand 8 -to- 8 -to- LOST WAX AST BRONZE 8" DOOR PULLS May Be Used Separately or With Pull Plates Back To Back Back To Back Twist 8" Pull olumn 8" Pull Palermo 8" Pull Recoleta 8" Pull Art Nouveau 8" Pull (Left Hand) Art Nouveau 8" Pull (Right Hand) BTB BTB BTB BTB LH 86144RH $ $ $ $ $ $ $ $ $ $ Petal Pull Plate Petal Push Plate 3" W x 12" H PETAL PUSH & PULL PLATES Supplied with 4 Wood Screws 14 Overall 8 Petal Push Plate Petal Pull Plate $ Plate Only $ Plate Only >> Pull plates and pulls must be ordered separately. To order: (BTB) + + Add Door Thickness to omments 143

144 DOOR PULLS - LOST WAX AST BRONZE DOOR PULLS 12 Twist 12 olumn 18 olumn Supplied with #10 Wood Screws 24 olumn Supplied with #10 Wood Screws 12 -to- 12 -to- 18 Overall 24 Overall LOST WAX AST BRONZE DOOR PULLS 12", 18", and 24" Back To Back Back To Back Twist 12" Pull BTB $ $ olumn 12" Pull BTB $ $ olumn 18" Pull $ olumn 24" Pull $ To order: (BTB) + + Add Door Thickness to omments

145 WROUGHT STEEL - DOOR PULLS Lafayette Normandy San arlos 18" San arlos Supplied with #10 Wood Screws 24" San arlos Supplied with #10 Wood Screws DOOR PULLS 8 -to- 18 Overall 24 Overall WROUGHT STEEL DOOR PULLS 8", 18", and 24" Back To Back Back To Back Lafayette 8" Pull Normandy 8" Pull BTB BTB Flat Black Steel (FBS) Satin Steel (SWS) $88.00 $88.00 $ $ San arlos 8" Pull BTB $88.00 $ San arlos 18" Pull $ San arlos 24" Pull $ To order: (BTB) + + Add Door Thickness to omments 145

146 POKET DOOR MORTISE - BRASS POKET DOOR MORTISE MODERN RETANGULAR POKET DOOR MORTISE LOKS Keyed Pocket Door Mortise Lock** Passage Pocket Door Mortise Lock Privacy Pocket Door Mortise Lock Pocket Door Mortise Lock Satin Brass (US4) Polished Nickel - Lifetime (US14) $ $ $ $ *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Keyed Door Mortise Lock Privacy Door Mortise Lock EXTERIOR INTERIOR EXTERIOR INTERIOR 71/4" 27/8" Supplied with: - Mortise lock body includes cylinder and 2 keys - Strike plate and finish matching screws Passage Door Mortise Lock Supplied with: - Mortise lock body - Strike plate and finish matching screws Door Mortise Lock EXTERIOR INTERIOR EXTERIOR Strike plate accepts latch from keyed & Privacy Mortise Locks. INTERIOR Supplied with: - Mortise lock body - matching screws Supplied with: - mortise lock body - matching screws Handing NOT Required. Specify Exterior or Interior for Split. Must specify door thickness for ALL functions. Trim plates are 1/16" thick. ** Emtek pocket door mortise locks can be keyed alike with each other, but may not be keyed alike with any other Emtek products. 146 To order: + + Add Door Thickness to omments

147 BRASS - POKET DOOR MORTISE LASSI POKET DOOR MORTISE LOKS Keyed Pocket Door Mortise Lock** Passage Pocket Door Mortise Lock Privacy Pocket Door Mortise Lock Pocket Door Mortise Lock Polished Brass (US3) $ $ $ $ POKET DOOR MORTISE *Unlacquered Brass (US3NL) finish available for a $40 upcharge per item. Keyed Door Mortise Lock Privacy Door Mortise Lock EXTERIOR INTERIOR EXTERIOR INTERIOR Supplied with: - Mortise lock body includes cylinder and 2 keys - Strike plate and finish matching screws Supplied with: - Mortise lock body - Strike plate and finish matching screws Passage Door Mortise Lock Door Mortise Lock EXTERIOR INTERIOR EXTERIOR Strike plate accepts latch from keyed & Privacy Mortise Locks. INTERIOR Supplied with: - Mortise lock body - matching screws Supplied with: - mortise lock body - matching screws Handing NOT Required. Specify Exterior or Interior for Split. Must specify door thickness for ALL functions. Trim plates are 1/16" thick. ** Emtek pocket door mortise locks can be keyed alike with each other, but may not be keyed alike with any other Emtek products. To order: + + Add Door Thickness to omments 147

148 DOOR AESSORIES DOOR AESSORIES Passage Function Privacy Function POKET DOOR LOKS Passage 23/8 x 31/8 Privacy 23/8 x 31/ Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $26.00 $34.00 >> Fits door thickness 13/8 to 13/4. Supplied with finish matching screws. Edge Pull EDGE PULL 3/4 x Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $12.00 >> Supplied with finish matching screws. Window Utility Pulls WINDOW UTILITY PULLS Polished Brass (US3) $8.00 $24.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. 148 Supplied with finish matching screws. Screws are NOT sold separately.

149 DOOR AESSORIES FLUSH PULLS Modern Rectangular 13/4 x 4 Modern Rectangular 13/4 x 6 Modern Rectangular 2 x Satin Brass (US4) Polished Nickel - Lifetime (US14) $18.00 $26.00 $30.00 DOOR AESSORIES Modern Rectangular 2 x $42.00 Rectangular Flush Pull Square Flush Pull Square 21/2 x 21/2 Fits standard 21/8 door prep Round 21/2 Dia. Fits standard 21/8 door prep Rectangular 13/4 x Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $14.00 $14.00 $14.00 Modern Rectangular Flush Pull Round Flush Pull Modern Rectangular 27/8 x 71/ Satin Brass (US4) Polished Nickel - Lifetime (US14) $30.00 lassic Rectangular Flush Pull lassic Rectangular 21/2 x 71/ Polished Brass (US3) $30.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Supplied with finish matching screws. Screws are NOT sold separately. 149

150 DOOR AESSORIES DOOR AESSORIES 4 Dutch Door Bolt DUTH DOOR BOLT Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $26.00 >> Supplied with 2 types of strike plates and finish matching screws. Lip Strike Mortise Strike Solid Brass Surface Bolts SOLID BRASS SURFAE BOLTS Satin Brass (US4) Polished Nickel - Lifetime (US14) $46.00 $54.00 $60.00 $74.00 $88.00 >> Supplied with 3 types of strike plates and finish matching screws. Lip Strike Mortise Strike Angle Strike *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. 150 Supplied with finish matching screws. Screws or strikes are NOT sold separately.

151 DOOR AESSORIES Keyed Patio Door Bolts PATIO DOOR BOLTS Keyed Silver Bronze $16.00 $16.00 DOOR AESSORIES White $ Black $16.00 Non-Keyed Patio Door Bolts Non-Keyed Silver Bronze $12.00 $ White $12.00 oncealed Screw Surface Bolts ONEALED SREW SURFAE BOLTS Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $12.00 $15.00 $18.00 $21.00 >> Supplied with 3 types of strike plates and finish matching screws. Lip Strike Mortise Strike Angle Strike Flush Bolts Square & Radius orners FLUSH BOLTS 4 with Square orners 4 with 5/8 Radius orners 6 with Square orners 6 with 5/8 Radius orners 12 with Square orners 12 with 5/8 Radius orners Satin Brass (US4) Polished Nickel - Lifetime (US14) $10.00 $10.00 $12.00 $12.00 $24.00 $24.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Supplied with finish matching screws. Screws or strikes are NOT sold separately. 151

152 DOOR AESSORIES DOOR AESSORIES Security Door Guard SEURITY DOOR GUARD 4 x 21/2 5 x 21/ Polished Brass (US3) $24.00 $26.00 Roller atch DOOR ATH Ball atch Roller atch Ball atch Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $30.00 $16.00 >> Supplied with strike plates and finish matching screws. asement Latch ASEMENT LATH Standard Size 1 x 15/8 Large Size 11/16 x 21/ Polished Brass (US3) $18.00 $28.00 >> Supplied with 3 types of strike plates and finish matching screws. *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. 152 Supplied with finish matching screws. Screws are NOT sold separately.

153 DOOR AESSORIES Kickdown Door Holders 4 and 5 KIKDOWN DOOR HOLDERS Polished Brass (US3) $20.00 $22.00 DOOR AESSORIES MAGNETI DOOR STOP & HOLDER 3 Magnetic Door Stop & Holder Polished Brass (US3) $24.00 Extendable Baseboard Door Bumper EXTENDABLE BASEBOARD DOOR BUMPER 31/2 or 41/ Satin Brass (US4) Polished Nickel (US14) $16.00 >> Includes 3, 1, and 1/2 base with 2 screws. Door Stops 3 and 4 DOOR STOPS Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $10.00 $12.00 Floor Door Bumper FLOOR DOOR BUMPER 13/8 x 11/ Polished Brass (US3) $10.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Supplied with finish matching screws. Screws are NOT sold separately. 153

154 DOOR AESSORIES DOOR AESSORIES Half Dome Door Stop Goose Style Door Stop DOOR STOPS Half Dome Goose Style Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $12.00 $22.00 ylinder Floor Bumpers 11/2 and 2 YLINDER FLOOR BUMPERS 11/2 ylinder 2 ylinder Satin Brass (US4) Polished Nickel - Lifetime (US14) $16.00 $18.00 ylinder Floor Bumpers with Dome ap 11/2 and 2 YLINDER FLOOR BUMPERS WITH DOME AP 11/2 ylinder Dome ap 2 ylinder Dome ap $16.00 $18.00 Wall Bumper with #8 Rosette Wall Bumper with Square Rosette WALL BUMPERS Available for All Rosettes 2255 See Page for available Rosette Styles and options. $12.00 Wall Bumper with Regular Rosette Wall Bumper with #2 Rosette *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. 154 Supplied with finish matching screws. Screws are NOT sold separately.

155 DOOR AESSORIES Bronze Door Knocker 3 Bronze Door Knocker 4 BRONZE DOOR KNOKERS 3 with Ring Pull 4 with Ring Pull $44.00 $52.00 DOOR AESSORIES Urn Style Narrow Style SOLID BRASS DOOR KNOKERS Urn 2620 Polished Brass (US3) $40.00 Narrow 2621 $40.00 >> We recommend that US3 finish be selected for those who intend to have the door knocker engraved. Emtek does not offer engraving services at this time. Solid Brass Mail Slot SOLID BRASS MAIL SLOT 33/8 x 131/ $78.00 >> omplete set includes both interior and exterior trims. Supplied with wood screws. Not available in split finish. Solid Brass Door Viewer SOLID BRASS DOOR VIEWER Hole Diameter 5/ $16.00 Front side Back side >> 200 Degree wide viewing angle. Fits door thickness from 13/8 to 2. Not available in split finish. *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Supplied with finish matching screws. Screws are NOT sold separately. 155

156 DOOR AESSORIES DOOR AESSORIES Solid Brass with Arch Style Sandcast Bronze with Arch Style Interior Exterior Interior Exterior SREEN DOOR LOKS - ARH STYLE Handing Solid Brass 11/4 x LH/RH $ Sandcast Bronze 11/4 x LH/RH $ Solid Brass with Rectangular Style Sandcast Bronze with Rectangular Style Interior Exterior Interior Exterior SREEN DOOR LOKS - RETANGULAR STYLE Handing Solid Brass 11/4 x LH/RH $ Sandcast Bronze 11/4 x LH/RH $ *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Handing Required for Screen Door Locks. Supplied with mortise lock body, strike plates and finish matching screws. NOT available knob by knob, lever by lever. NOT available in split finish. 156 To order: + Handing +

157 DOOR AESSORIES Modern Brass Double Hook with Rosette MODERN BRASS DOUBLE HOOK WITH ROSETTE See Page 6 & 7 for Brass Rosette Options Satin Brass (US4) Polished Nickel - Lifetime (US14) $38.00 DOOR AESSORIES Transitional Brass Single Hook with Rosette TRANSITIONAL BRASS SINGLE HOOK WITH ROSETTE See Page 6 & 7 for Brass Rosette Options Satin Brass (US4) Polished Nickel - Lifetime (US14) $32.00 Traditional Brass Double Hook with Rosette TRADITIONAL BRASS DOUBLE HOOK WITH ROSETTE See Page 6 & 7 for Brass Rosette Options Polished Nickel - Lifetime (US14) $28.00 Traditional Brass Single Hook with Rosette TRADITIONAL BRASS SINGLE HOOK WITH ROSETTE See Page 6 & 7 for Brass Rosette Options Polished Nickel - Lifetime (US14) $26.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. To order: + 157

158 DOOR AESSORIES DOOR AESSORIES Solid Brass Double Hook SOLID BRASS DOUBLE HOOK Base Height: 13/4 Projection: 21/ Polished Nickel - Lifetime (US14) $16.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Solid Brass Robe Hook SOLID BRASS ROBE HOOK Base Height: 13/4 Projection: 25/ Satin Brass (US4) Polished Nickel - Lifetime (US14) $16.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Sandcast Bronze 3 Hooks with Rectangular Plate SANDAST BRONZE 3 HOOKS WITH RETANGULAR PLATE 91/2 x 2 Projection: 21/ Flat Black (FB) $62.00 Sandcast Bronze Double Hook SANDAST BRONZE DOUBLE HOOK Base Height: 13/4 Projection: Flat Black (FB) $20.00 Sandcast Bronze Robe Hook SANDAST BRONZE ROBE HOOK Base Height: 11/2 Projection: 21/ Flat Black (FB) $ To order: +

159 DOOR AESSORIES Sandcast Bronze Single Hook SANDAST BRONZE SINGLE HOOK See Page 7 for Sandcast Bronze Rosette Options $28.00 DOOR AESSORIES Tuscany Bronze Double Hook TUSANY BRONZE DOUBLE HOOK Base Height: 13/4 Projection: 21/ $30.00 Tuscany Bronze Single Hook TUSANY BRONZE SINGLE HOOK See Page 8 for Lost Wax Bronze Rosette Options $28.00 Wrought Steel Robe Hook WROUGHT STEEL ROBE HOOK Base Height: 11/2 Projection: Flat Black Steel (FBS) $8.00 Satin Steel (SWS) Stainless Steel Single Hook STAINLESS STEEL SINGLE HOOK Projection: 25/8 S71001 Brushed Stainless Steel $30.00 To order: + 159

160 DOOR AESSORIES - BRASS HOUSE NUMBERS DOOR AESSORIES Brass House Numbers 4 Brass House Numbers 51/2 4 BRASS HOUSE NUMBERS House Number Digit '0' House Number Digit '1' $10.00 $10.00 House Number Digit '2' 2812 $10.00 House Number Digit '3' 2813 $10.00 House Number Digit '4' 2814 $10.00 House Number Digit '5' 2815 $10.00 House Number Digit '6' 2816 $10.00 House Number Digit '7' 2817 $10.00 House Number Digit '8' 2818 $10.00 House Number Digit '9' 2819 $ /2 BRASS HOUSE NUMBERS House Number Digit '0' House Number Digit '1' $14.00 $14.00 House Number Digit '2' 2822 $14.00 House Number Digit '3' 2823 $14.00 House Number Digit '4' 2824 $14.00 House Number Digit '5' 2825 $14.00 House Number Digit '6' 2826 $14.00 House Number Digit '7' 2827 $14.00 House Number Digit '8' 2828 $14.00 House Number Digit '9' 2829 $14.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. 160 Supplied with finish matching screws Screws are NOT sold separately.

161 BRONZE HOUSE NUMBERS - DOOR AESSORIES Bronze House Numbers 4 Bronze House Numbers 4 BRONZE HOUSE NUMBERS 6 House Number Digit '0' 2810 House Number Digit '1' 2811 $14.00 $14.00 DOOR AESSORIES House Number Digit '2' 2812 $14.00 House Number Digit '3' 2813 $14.00 House Number Digit '4' 2814 $14.00 House Number Digit '5' 2815 $14.00 House Number Digit '6' 2816 $14.00 House Number Digit '7' 2817 $14.00 House Number Digit '8' 2818 $14.00 House Number Digit '9' 2819 $ BRONZE HOUSE NUMBERS House Number Digit '0' House Number Digit '1' $20.00 $20.00 House Number Digit '2' 2822 $20.00 House Number Digit '3' 2823 $20.00 House Number Digit '4' 2824 $20.00 House Number Digit '5' 2825 $20.00 House Number Digit '6' 2826 $20.00 House Number Digit '7' 2827 $20.00 House Number Digit '8' 2828 $20.00 House Number Digit '9' 2829 $20.00 Supplied with finish matching screws Screws are NOT sold separately. 161

162 DOOR AESSORIES - DOORBELLS DOOR AESSORIES Regular Rectangular Rope Oval #8 Lancaster BRASS DOORBELL WITH PLATE & BUTTON Doorbell Button with Regular Rosette Doorbell Button with Oval Rosette Doorbell Button with Rectangular Rosette Doorbell Button with #8 Rosette Doorbell Button with Quincy Rosette Polished Nickel - Lifetime (US14)** $32.00 $32.00 $32.00 $32.00 $32.00 Doorbell Button with Wilshire Rosette 2404 $32.00 Ribbon & Reed Arts & rafts Quincy Wilshire Doorbell Button with Rope Rosette Doorbell Button with Lancaster Rosette Doorbell Button with Ribbon & Reed Rosette $32.00 $32.00 $32.00 Hammered Doorbell Button with Arts & rafts Rosette Doorbell Button with Hammered Rosette $32.00 $32.00 Modern Square Neos Doorbell Button with Modern Rosette Doorbell Button with Disk Rosette Doorbell Button with Square Rosette Satin Brass (US4) Polished Nickel - Lifetime (US14)** $32.00 $32.00 $32.00 Doorbell Button with Neos Rosette 2460 $32.00 Disk Modern Rectangular Doorbell Button with Modern Rectangular Rosette 2463 $32.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. **Polished Nickel - Lifetime (US14) NOT available for Oval, Quincy, Modern, and Neos Rosettes. 162 Supplied with matching screws & lighted button. Screws are NOT sold separately.

163 DOORBELLS - DOOR AESSORIES Small #1 #1 Small Oval Small Rectangular #4 SMALL DOORBELL WITH PLATE & BUTTON Doorbell Button with Small #1 Rosette Doorbell Button with Small Oval Rosette Doorbell Button with Small Rectangular Rosette Satin Brass (US4) Polished Nickel - Lifetime (US14) $32.00 $32.00 $32.00 DOOR AESSORIES #2 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. SANDAST BRONZE DOORBELL WITH PLATE & BUTTON #3 #6 Doorbell Button with #1 Rosette Doorbell Button with #2 Rosette $34.00 $34.00 #11 #14 Doorbell Button with #3 Rosette Doorbell Button with #4 Rosette Doorbell Button with #6 Rosette $34.00 $34.00 $34.00 TUSANY BRONZE DOORBELL WITH PLATE & BUTTON #15 Doorbell Button with #11 Rosette 2411 $34.00 #12 Doorbell Button with #12 Rosette 2412 $34.00 Doorbell Button with #14 Rosette 2414 $34.00 #1 Doorbell Button with #15 Rosette 2415 $34.00 WROUGHT STEEL DOORBELL WITH PLATE & BUTTON #2 #3 Doorbell Button with #1 Rosette 2431 Flat Black Steel (FBS) Satin Steel (SWS) $32.00 Doorbell Button with #2 Rosette 2432 $32.00 Doorbell Button with #3 Rosette 2433 $32.00 Supplied with matching screws & lighted button. Screws are NOT sold separately. 163

164 DOOR AESSORIES - FORGED BRASS SWITH PLATES DOOR AESSORIES FORGED BRASS SWITH PLATES Toggle 1, olonial Switch Plate Toggle 2, olonial Switch Plate Toggle 3, olonial Switch Plate Toggle 4, olonial Switch Plate $16.00 $22.00 $28.00 $38.00 FORGED BRASS SWITH PLATES Rocker 1, olonial Switch Plate Rocker 2, olonial Switch Plate Rocker 3, olonial Switch Plate Rocker 4, olonial Switch Plate $16.00 $22.00 $28.00 $38.00 FORGED BRASS SWITH PLATES Duplex 1, olonial Switch Plate Duplex 2, olonial Switch Plate $16.00 $22.00 FORGED BRASS SWITH PLATES Toggle 1, Duplex 1 olonial Switch Plate Toggle 2, Duplex 1 olonial Switch Plate Rocker 1, Duplex 1 olonial Switch Plate $22.00 $28.00 $22.00 FORGED BRASS SWITH PLATES olonial Blank Plate olonial able Plate $16.00 $16.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. 164 Supplied with finish matching screws Screws are NOT sold separately.

165 FORGED BRASS SWITH PLATES - DOOR AESSORIES FORGED BRASS SWITH PLATES Toggle 1, Rope Switch Plate Toggle 2, Rope Switch Plate Toggle 3, Rope Switch Plate Toggle 4, Rope Switch Plate $16.00 $22.00 $28.00 $38.00 DOOR AESSORIES FORGED BRASS SWITH PLATES Rocker 1, Rope Switch Plate Rocker 2, Rope Switch Plate Rocker 3, Rope Switch Plate Rocker 4, Rope Switch Plate $16.00 $22.00 $28.00 $38.00 FORGED BRASS SWITH PLATES Duplex 1, Rope Switch Plate Duplex 2, Rope Switch Plate $16.00 $22.00 FORGED BRASS SWITH PLATES Toggle 1, Duplex 1 Rope Switch Plate Toggle 2, Duplex 1 Rope Switch Plate Rocker 1, Duplex 1 Rope Switch Plate $22.00 $28.00 $22.00 FORGED BRASS SWITH PLATES Rope Blank Plate Rope able Plate $16.00 $16.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Supplied with finish matching screws Screws are NOT sold separately. 165

166 SOLID BRASS HINGES - HEAVY DUTY, SQUARE BARREL HINGES 3 1/2 x 3 1/2 Square Barrel 4 1/2 x 4 1/2 Square Barrel 4 x 4 Square Barrel SQUARE BARREL HEAVY DUTY HINGES - SOLID BRASS Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2" x 3 1/2" 4" x 4" 4 1/2 x 4 1/ Satin Brass (US4) Polished Nickel (US14) $52.00 $58.00 $64.00 $48.00 $54.00 $ (Pair) 24 (Pair) 24 (Pair) *Unlacquered Brass (US3NL) finish available for a $40 upcharge per pair. >> Decorative Tips are NOT available for Square Barrel Heavy Duty Hinges. See page 180 for Hinge Screw Pack Options. 166 Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price).

167 RESIDENTIAL DUTY, PLAIN BEARING - SOLID BRASS HINGES HINGES 4 x 4 Residential Duty 1/4 Radius orners 3 1/2 x 3 1/2 Residential Duty 1/4 Radius orners 3 1/2 x 3 1/2 Residential Duty 5/8 Radius orners RESIDENTIAL DUTY HINGES - SOLID BRASS Plain Bearing, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners 4 x 4 with Square orners 3 1/2 x 3 1/2 with 1/4 Radius orners 4 x 4 with 1/4 Radius orners Satin Brass (US4) Polished Nickel (US14) $32.00 $36.00 $32.00 $36.00 $28.00 $32.00 $28.00 $ (Pair) 24 (Pair) 24 (Pair) 24 (Pair) 3 1/2 x 3 1/2 with 5/8 Radius orners $32.00 $ (Pair) 4 x 4 with 5/8 Radius orners $36.00 $ (Pair) *Unlacquered Brass (US3NL) finish available for a $40 upcharge per pair. >> See page for Decorative Tip Sets for Solid Brass Hinges and page 180 for Hinge Screw Pack Options. Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price). 167

168 SOLID BRASS HINGES - HEAVY DUTY, PLAIN BEARING HINGES 4 1/2 x 4 1/2 Heavy Duty Square orners 3 1/2 x 3 1/2 Heavy Duty 1/4 Radius orners 4 x 4 Heavy Duty 5/8 Radius orners HEAVY DUTY HINGES - SOLID BRASS Plain Bearing, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners 4 x 4 with Square orners 4 1/2 x 4 1/2 with Square orners 3 1/2 x 3 1/2 with 1/4 Radius orners Satin Brass (US4) Polished Nickel (US14) $38.00 $44.00 $50.00 $38.00 $34.00 $40.00 $46.00 $ (Pair) 24 (Pair) 24 (Pair) 24 (Pair) 4 x 4 with 1/4 Radius orners $44.00 $ (Pair) 4 1/2 x 4 1/2 with 1/4 Radius orners $50.00 $ (Pair) 3 1/2 x 3 1/2 with 5/8 Radius orners $38.00 $ (Pair) 4 x 4 with 5/8 Radius orners $44.00 $ (Pair) *Unlacquered Brass (US3NL) finish available for a $40 upcharge per pair. >> See page for Decorative Tip Sets for Solid Brass Hinges and page 180 for Hinge Screw Pack Options. 168 Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price).

169 HEAVY DUTY, BALL BEARING - SOLID BRASS HINGES HINGES 3 1/2 x 3 1/2 Heavy Duty Square orners 4 1/2 x 4 1/2 Heavy Duty 1/4 Radius orners HEAVY DUTY HINGES - SOLID BRASS Ball Bearing, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners 4 x 4 with Square orners 4 1/2 x 4 1/2 with Square orners 5 x 5 with Square orners Satin Brass (US4) Polished Nickel (US14) $44.00 $50.00 $56.00 $62.00 $40.00 $46.00 $52.00 $ (Pair) 24 (Pair) 24 (Pair) 24 (Pair) 4 1/2 x 4 1/2 with 1/4 Radius orners $56.00 $ (Pair) *Unlacquered Brass (US3NL) finish available for a $40 upcharge per pair. >> See page for Decorative Tip Sets for Solid Brass Hinges and page 180 for Hinge Screw Pack Options. Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price). 169

170 DEORATIVE TIPS FOR SOLID BRASS HINGES HINGES BALL TIP SETS 4 tips per set Ball Tip for 3 1/2" Hinges Ball Tip for 4 1/2" Hinges for 3 1/2 x 3 1/2 Residential Duty Hinges for 4 x 4 Residential Duty Hinges for 3 1/2 x 3 1/2 Heavy Duty Plain or Ball Bearing Hinges Satin Brass (US4) Polished Nickel (US14) $14.00 $14.00 $14.00 for 4 x 4 Heavy Duty Plain or Ball Bearing Hinges $14.00 for 4 1/2 x 4 1/2 or 5 x 5 Heavy Duty Plain or Ball Bearing Hinges $14.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per pair. Steeple Tip for 3 1/2" Hinges STEEPLE TIP SETS 4 tips per set Steeple Tip for 4" Hinges for 3 1/2 x 3 1/2 Residential Duty Hinges for 4 x 4 Residential Duty Hinges for 3 1/2 x 3 1/2 Heavy Duty Plain or Ball Bearing Hinges Satin Brass (US4) Polished Nickel (US14) $14.00 $14.00 $14.00 for 4 x 4 Heavy Duty Plain or Ball Bearing Hinges $14.00 for 4 1/2 x 4 1/2 or 5 x 5 Heavy Duty Plain or Ball Bearing Hinges $14.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per pair. 170 Tip sets are available in 1/2 pair (2 tips) for 50% of the list price. Please use quantity (.5) When ordering.

171 DEORATIVE TIPS FOR SOLID BRASS HINGES BUTTON TIP SETS 4 tips per set HINGES Button Tip for 3 1/2" Hinges for 3 1/2 x 3 1/2 Residential Duty Hinges for 4 x 4 Residential Duty Hinges for 3 1/2 x 3 1/2 Heavy Duty Plain or Ball Bearing Hinges Satin Brass (US4) Polished Nickel (US14) $14.00 $14.00 $14.00 Button Tip for 4" Hinges for 4 x 4 Heavy Duty Plain or Ball Bearing Hinges $14.00 for 4 1/2 x 4 1/2 or 5 x 5 Heavy Duty Plain or Ball Bearing Hinges $14.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per pair. Extended Button Tip EXTENDED BUTTON TIP Used with Hinge Pivot Stop on Solid Brass Hinge Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $4.00 ea Hinges Pivot Stop *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. HINGES PIVOT STOP 2241 Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $8.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per pair. Hinge Pivot with Solid Brass Hinge Extended Button Tip *Required Hinge Pivot Stop Solid Brass Hinge *Remove Tip Before installation >> Required Extended Button Tip when used with Solid Brass Hinges. Not compatible with Steel Residential Duty Hinges. Tip sets are available in 1/2 pair (2 tips) for 50% of the list price. Please use quantity (.5) When ordering. 171

172 STEEL HINGES - RESIDENTIAL DUTY, PLAIN BEARING HINGES 4 x 4" Residential Duty Square orners 3 1/2 x 3 1/2 Residential Duty 1/4 Radius orners 4 x 4 Residential Duty 5/8 Radius orners RESIDENTIAL DUTY HINGES - STEEL Plain Bearing, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners* 4 x 4 with Square orners** 3 1/2 x 3 1/2 with 1/4 Radius orners* 4 x 4 with 1/4 Radius orners** Polished Brass (US3) Polished Nickel (US14) Satin hrome (US26D) $9.50 $11.00 $9.50 $11.00 $8.50 $9.00 $8.50 $ (Pair) 24 (Pair) 24 (Pair) 24 (Pair) 3 1/2 x 3 1/2 with 5/8 Radius orners* $9.50 $ (Pair) 4 x 4 with 5/8 Radius orners** $11.00 $ (Pair) * 31/2 x 31/2 Hinges have 6 screwholes per hinge in an Arc pattern. ** 4 x 4 Hinges have 8 screwholes per hinge in a Zig-Zag pattern. >> Decorative Tips are NOT available for Residential Duty, Plain Bearing Steel Hinges. See page 180 for Hinge Screw Pack Options. 172 Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price).

173 HEAVY DUTY, PLAIN BEARING - STEEL HINGES HINGES 4 1/2 x 4 1/2 Heavy Duty Square orners 4 x 4 Heavy Duty 1/4 Radius orners 3 1/2 x 3 1/2 Heavy Duty 5/8 Radius orners HEAVY DUTY HINGES - STEEL Plain Bearing, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners 4 x 4 with Square orners 4 1/2 x 4 1/2 with Square orners 3 1/2 x 3 1/2 with 1/4 Radius orners Polished Brass (US3) Polished Nickel (US14) Satin hrome (US26D) $14.00 $16.00 $18.00 $14.00 $12.00 $14.00 $16.00 $ (Pair) 24 (Pair) 24 (Pair) 24 (Pair) 4 x 4 with 1/4 Radius orners $16.00 $ (Pair) 4 1/2 x 4 1/2 with 1/4 Radius orners $18.00 $ (Pair) 3 1/2 x 3 1/2 with 5/8 Radius orners $14.00 $ (Pair) 4 x 4 with 5/8 Radius orners $16.00 $ (Pair) >> See page 175 for Decorative Tip Sets for Steel Hinges and page 180 for Hinge Screw Pack Options. Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price). 173

174 STEEL HINGES - HEAVY DUTY, BALL BEARING HINGES 3 1/2 x 3 1/2 Heavy Duty Square orners 3 1/2 x 3 1/2 Heavy Duty 1/4 Radius orners 4 x 4" Heavy Duty 5/8 Radius orners HEAVY DUTY HINGES - STEEL Ball Bearing, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners 4 x 4 with Square orners 4 1/2 x 4 1/2 with Square orners 3 1/2 x 3 1/2 with 1/4 Radius orners Polished Brass (US3) Polished Nickel (US14) Satin hrome (US26D) $22.00 $24.00 $26.00 $22.00 $20.00 $22.00 $24.00 $ (Pair) 24 (Pair) 24 (Pair) 24 (Pair) 4 x 4 with 1/4 Radius orners $24.00 $ (Pair) 4 1/2 x 4 1/2 with 1/4 Radius orners $26.00 $ (Pair) 3 1/2 x 3 1/2 with 5/8 Radius orners $22.00 $ (Pair) 4 x 4 with 5/8 Radius orners $24.00 $ (Pair) >> See page 175 for Decorative Tip Sets for Steel Hinges and page 180 for Hinge Screw Pack Options. 174 Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price).

175 DEORATIVE TIPS FOR STEEL HINGES HINGES Ball Tip BALL TIP SETS 2 pins and 4 tips per set 3 1/ / Polished Brass (US3) Polished Nickel (US14) Satin hrome (US26D) $12.00 $12.00 $12.00 >> Tip sets cannot be used with Hinge Pivot Stop. Not compatible with Residential Duty Hinges. Steeple Tip STEEPLE TIP SETS 2 pins and 4 tips per set 3 1/ / Polished Brass (US3) Polished Nickel (US14) Satin hrome (US26D) $12.00 $12.00 $12.00 >> Tip sets cannot be used with Hinge Pivot Stop. Not compatible with Residential Duty Hinges. Tip Sets are available in 1/2 Pair (1 pin and 2 tips) for 50% of the. Please use quantity (.5) when ordering. ompatible with Heavy Duty and Ball Bearing Hinges only. Not compatible with Residential Duty Hinges. 175

176 STAINLESS STEEL HINGES - RESIDENTIAL DUTY, PLAIN BEARING HINGES 3 1/2 x 3 1/2 Residential Duty Square orners 4 x 4 Residential Duty 1/4 Radius orners 4" x 4" Residential Duty 5/8 Radius orners RESIDENTIAL DUTY HINGES - STAINLESS STEEL Plain Bearing, 304 Grade, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners D Brushed Stainless Steel (SS) $20.00 $ (Pair) 4 x 4 with Square orners D $24.00 $ (Pair) 3 1/2 x 3 1/2 with 1/4 Radius orners D $20.00 $ (Pair) 4 x 4 with 1/4 Radius orners D $24.00 $ (Pair) 3 1/2 x 3 1/2 with 5/8 Radius orners D $20.00 $ (Pair) 4 x 4 with 5/8 Radius orners D $24.00 $ (Pair) >> Decorative Tips are NOT available for Stainless Steel Hinges. See page 180 for Hinge Screw Pack Options. 176 Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price).

177 HEAVY DUTY, PLAIN BEARING - STAINLESS STEEL HINGES HINGES 3 1/2 x 3 1/2 Heavy Duty Square orners 4 x 4 Heavy Duty 1/4 Radius orners 4 x 4 Heavy Duty 5/8 Radius orners HEAVY DUTY HINGES - STAINLESS STEEL Plain Bearing, 304 Grade, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners D Brushed Stainless Steel (SS) $22.00 $ (Pair) 4 x 4 with Square orners D $28.00 $ (Pair) 4 1/2 x 4 1/2 with Square orners D $34.00 $ (Pair) 3 1/2 x 3 1/2 with 1/4 Radius orners D $22.00 $ (Pair) 4 x 4 with 1/4 Radius orners D $28.00 $ (Pair) 3 1/2 x 3 1/2 with 5/8 Radius orners D $22.00 $ (Pair) 4 x 4 with 5/8 Radius orners D $28.00 $ (Pair) >> Decorative Tips are NOT available for Stainless Steel Hinges. See page 180 for Hinge Screw Pack Options. Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price). 177

178 STAINLESS STEEL HINGES - HEAVY DUTY, BALL BEARING HINGES 4 x 4 Heavy Duty Square orners 4 x 4 Heavy Duty 1/4 Radius orners 3 1/2 x 3 1/2 Heavy Duty 5/8 Radius orners HEAVY DUTY HINGES - STAINLESS STEEL Ball Bearing, 304 Grade, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners D Brushed Stainless Steel (SS) $24.00 $ (Pair) 4 x 4 with Square orners D $32.00 $ (Pair) 4 1/2 x 4 1/2 with Square orners D $38.00 $ (Pair) 3 1/2 x 3 1/2 with 1/4 Radius orners D $24.00 $ (Pair) 4 x 4 with 1/4 Radius orners D $32.00 $ (Pair) 3 1/2 x 3 1/2 with 5/8 Radius orners D $24.00 $ (Pair) 4 x 4 with 5/8 Radius orners D $32.00 $ (Pair) >> Decorative Tips are NOT available for Stainless Steel Hinges. See page 180 for Hinge Screw Pack Options 178 Hinges are available in ½ pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) is available for additional $3.00 Per pair (NET price).

179 UL LISTED - SPRING HINGES HINGES 3 1/2 x 3 1/2 Spring Hinge 1/4 Radius orners 4 x 4" Spring Hinge Square orners 4 x 4" Spring Hinge 5/8 Radius orners SPRING HINGES, UL LISTED - STEEL Plated Steel, Thickness: (Per Pair) Broken ase (Per Pair) 1 or More ases Hinges Per ase 3 1/2 x 3 1/2 with Square orners 4 x 4 with Square orners 3 1/2 x 3 1/2 with 1/4 Radius orners 4 x 4 with 1/4 Radius orners Polished Brass (US3) Polished Nickel (US14) Satin hrome (US26D) $24.00 $26.00 $24.00 $26.00 $22.00 $24.00 $22.00 $ (Pair) 24 (Pair) 24 (Pair) 24 (Pair) 3 1/2 x 3 1/2 with 5/8 Radius orners $24.00 $ (Pair) 4 x 4 with 5/8 Radius orners $26.00 $ (Pair) >> Decorative Tips are NOT available for Spring Hinges. See page 180 for Hinge Screw Pack Options Hinges are available in 1/2 pair (1 hinge) for 50% of the list price. Please use quantity (.5) when ordering. All hinges supplied with screws. Non-Removable Pin (NRP) NOT available for Spring Hinges. 179

180 HINGE SREWS HINGES Flat Head Wood Screw - Steel #9 x 3/4 PRODUT ODE REFERENE SREW PART NUMBER PK-9FHWS75-B Polished Brass (US3) PK-9FHWS75-SB Satin Brass (US4) PK-9FHWS75-FA PK-9FHWS75-O PK-9FHWS75-PN Polished Nickel (US14) PK-9FHWS75-N PK-9FHWS75-P PK-9FHWS75-FB PK-9FHWS PK-9FHWS75-S Satin hrome (US26D) PK-9FHWS75-MB PK-9FHWS75-TWB $11.00 Pack Qty 100 Flat Head Wood Screw - Steel #10 x 1 PRODUT ODE REFERENE SREW PART NUMBER PK-10FHWS10-B Polished Brass (US3) PK-10FHWS10-SB Satin Brass (US4) PK-10FHWS10-FA PK-10FHWS10-O PK-10FHWS10-PN Polished Nickel (US14) PK-10FHWS10-N PK-10FHWS10-P PK-10FHWS10-FB PK-10FHWS PK-10FHWS10-S Satin hrome (US26D) PK-10FHWS10-MB PK-10FHWS10-TWB $12.00 Pack Qty 100 PRODUT ODE REFERENE SREW PART NUMBER Pack Qty Flat Head Wood Screw - Steel #12 x 11/ PK-12FHWS13-B Polished Brass (US3) PK-12FHWS13-SB Satin Brass (US4) PK-12FHWS13-FA PK-12FHWS13-O PK-12FHWS13-PN Polished Nickel (US14) PK-12FHWS13-N PK-12FHWS13-P PK-12FHWS13-FB PK-12FHWS PK-12FHWS13-S Satin hrome (US26D) PK-12FHWS13-MB PK-12FHWS13-TWB $ NOTE: Stainless Steel Bulk Pack Screws NOT available at this time. 180 To order: Product Description + Size +

181 LATHES Drive-in Latch DRIVE-IN LATHES Passage Latch, 23/8 backset Privacy Latch, 23/8 backset L4-PASDV2375 L4-PRVDV2375 Please specify Brass or hrome nose bolt. $8.00 $8.00 PARTS & OPTIONS Passage Latch, 23/4 backset L4-PASDV275 $8.00 Privacy Latch, 23/4 backset L4-PRVDV275 $8.00 DEADBOLT LATHES Deadbolt Latch 23/8 backset 23/8 backset, Radius orners 23/4 backset 23/4 backset, Radius orners L4-DBLTH2375 L4-DBLH2375R L4-DBLTH275 L4-DBLH275R Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $8.00 $8.00 $8.00 $8.00 Key In Latch KEY IN LATHES 23/8 backset 23/8 backset, Radius orners 23/4 backset 23/4 backset, Radius orners L4-DLB2375 L4-DLB2375R L4-DLB275 L4-DLB275R Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $8.00 $8.00 $8.00 $8.00 Thumbturn Privacy Latch THUMBTURN PRIVAY LATHES Privacy Latch, 23/8 backset Privacy Latch, 23/4 backset L4-PRIDB238 L4-PRIDB275 Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $8.00 $8.00 *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Latches are included with Emtek locks. Latches come standard with square corner face plates. Radius corner face plates may be substituted at no extra charge. 181

182 LATHES PARTS & OPTIONS Standard Latch STANDARD LATHES Passage Latch, 23/8 backset Privacy Latch, 23/8 backset L4-PASS_2375 L4-PRIV_2375 Please specify Brass or hrome nose bolt. $8.00 $8.00 Passage Latch, 23/4 backset L4-PASS_275 $8.00 Privacy Latch, 23/4 backset L4-PRIV_275 $8.00 >> If faceplate and screws are required. Please specify square or 1 4 radius corner for the faceplate, and finish. 28º Rotation Latch 28 DEGREE ROTATION LATHES Passage Latch, 23/8 backset Privacy Latch, 23/8 backset L4-PAS28B237 L4-PRV28B237 Please specify Brass or hrome nose bolt. $12.00 $12.00 Passage Latch, 23/4 backset L4-PAS28B275 $12.00 Privacy Latch, 23/4 backset L4-PRV28B275 $ rotation latch is designed to work with a corresponding door mechanism and cannot be retrofitted. If faceplate and screws are required. Please specify square or 1 4 radius corners for the faceplate, and finish. Lever operated with Standard Latch Lever operated with 28º Rotation Latch 48º 28º * Knobsets, leversets and platesets ordered with 28º Rotation Latches are assembled with internal components specifically designed for use ONLY with our 28º Rotation latch. 182 Latches are included with Emtek locks. Latches come standard with square corner faceplates. Radius corner faceplates may be substituted at no extra charge.

183 STRIKE PLATES Heavy Duty Deadbolt Strike Plate Heavy Duty Full Lip Deadbolt Strike Plate HEAVY DUTY DEADBOLT STRIKE PLATE Supplied with 4 Screws: (2) #10, 2 1/2 Wood Screws (2) #10, 3/4 Wood Screws Standard 11/4 x 35/8, 3/4 Fits Kwikset Type Jamb Prep Full Lip 17/8 x 35/8, 3/4 Full Lip Deadbolt Strike Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $6.00 $6.00 PARTS & OPTIONS >> Strike plates must be purchased separately. If ordered along with deadbolts they will be packed into the deadbolt boxes. In that case deadbolts will be packed with both normal strikes and heavy duty strikes. Full Lip Strike Square orner Full Lip Strike 1/4 Radius orner Extended Lip Strike Square orner T Strike Square orner STRIKE PLATES For Key In and Passage & s Full Lip Strike, Square orners Full Lip Strike, 1/4 Radius orners Extended Lip Strike, Square orners T Strike, Square orners Polished Brass (US3) Satin Brass (US4) Polished Nickel (US14) $6.00 $6.00 $6.00 $6.00 >> Square corner strike plates are standard. Full Lip Strike and T-Strike plates may be substituted at no extra charge. Extended Lip Strike and T-Strike plates NOT available with radius corners. *Unlacquered Brass (US3NL) finish available for a $20 upcharge per item. Strike plates are included with Emtek locks. Supplied with 2 screws. 183

184 PARTS & OPTIONS PARTS & OPTIONS UL LISTED Knobsets and Deadbolts Add the below product codes and prices to standard items to obtain UL LISTED versions of Emtek Knobsets and Deadbolts Knobsets with UL LISTING-USL, 60 Minute Fire Rating 81UL Add, Knob Style, Rosette Style*, and. * Available only in Round Rosettes for UL. Add On $20.00 Deadbolts with UL LISTING-USL, 60 Minute Fire Rating Single ylinder Deadbolt 84UL Add Material (Low Profile Brass (8455), Brass & Sandcast Bronze (8450), or Wrought Steel #2 (8452)) and Add. Add On $20.00 ONSTRUTION KEYING harge for onstruction Keying - $3 (NET) Locks that are both construction keyed and keyed alike will be charged a total of $5.00 (NET) per cylinder. harge for Re-Keying - $2 (NET) Locks that are keyed to code or keyed alike will be charged $2.00 (NET) per cylinder. onstruction devices used on one or more of last four positions. Dimples drilled in plug in this position. Keying to ode Order by indicating Key ode XXXXX next to applicable locks. Standard with onstruction Keying Services Lost ball system Last four pin locations drilled for lost ball application Master key wafers used for code variability onstruction keys and owner keys sent separately Order by indicating onstruction Keyed, House #_ next to applicable locks Keying Alike Order by indicating Keyed Alike next to applicable locks if only one keyed alike group is wanted. If ordering multiple groups (houses) indicate Keyed Alike House #_ next to applicable locks : $14.00 Thru-Bore Mounting Kit >> Specify Lever/Knob and Rosette styles when ordered. Y4 : $12.00 Tubular ylinder (Each) Thru-Bore Mounting Kit >> Specify function and finish. Key Blanks MS4-KEYBLK Schlage Keyway MS4-WEISERKYBLK Weiser (WR5) Keyway) : $2.00 : $

185 INDEX BY OLLETION OLLETION ELETRONI lassic EMTouch EMTouch lassic Liscio Modern Sandcast Bronze MORTISE ENTRY SETS Adelaide Albany Artemis Brisbane harleston heyenne raftsman raftsman Full Length Da Vinci Denver Hamilton Harrison Hera Longmont Lugano Manhattan Melrose Memphis Middleton Mills Morgan Mormont Mormont - Stainless Steel Octagon Rectangular Full Length Rectangular Monolithic Rectangular Sectional Regency Rockford Salem Sonoma Topeka Versailles Zeus MORTISE KNOB BY KNOB, LEVER BY LEVER ENTRY SETS Artemis Brisbane harleston heyenne raftsman Da Vinci Hailey Hamilton Harrison Manhattan Memphis Mormont Mormont - Stainless Steel Octagon Rectangular Regency TUBULAR ENTRY SETS Adams Apollo Ares Art Nouveau Arts & rafts Arts & rafts Full Length Baden Brighton reston PAGE 22, 23 20, 22, 23 20, 22, , 22, 23 21, 22, OLLETION Davos Davos - Stainless Steel Denver Franklin Greeley Hamden Imperial Jefferson Knoxville Laramie Lausanne Logan Marietta Melrose Monolithic with Lafayette Grip Monolithic with Normandy Grip Monolithic with San arlos Grip Nashville Octagon Orion Orleans Rectangular Full Length Rectangular Monolithic Rectangular Sectional Remington Ribbon & Reed Richmond Ridgemont Saratoga Sectional with Lafayette Grip Sectional with Normandy Grip Sectional with San arlos Grip Sheridan Tuscany Monolithic Tuscany Sectional Wilmington Wilshire Zeus Zeus - Stainless Steel GRIP BY GRIP ENTRY SETS Art Nouveau Brighton reston Denver Greeley Laramie Logan Octagon Rectangular Full Length Rectangular Monolithic Rectangular Sectional Remington Ridgemont Sheridan Tuscany Monolithic Tuscany Sectional KEY IN ENTRY SETS ortina Key in Lever Durango Key in Lever Egg Key in Knob Hanover Key In Lever Hanover Key in Lever - Stainless Steel Helios Key In Lever Luzern Key in Lever Petal Key in Knob Providence Key in Knob Rope Key in Knob Rope Key in Lever Round Key in Knob Siena Key in Lever Waverly Key in Knob Winchester Key in Knob PAGE INDEX BY OLLETION 185

186 INDEX BY OLLETION INDEX BY OLLETION 186 OLLETION SINGLE AND TWO POINT LOKSETS Annapolis Modern Rectangular DEADBOLTS #8 Arts & rafts Knoxville Low Profile Modern Neos Quincy Rectangular Regular Rope Sandcast Bronze #1 Sandcast Bronze #3 Sandcast Bronze #4 Sandcast Bronze Regular Sandcast Bronze Ridgemont Saratoga Square Stainless Steel Round Stainless Steel Square Tuscany Bronze Tuscany Bronze #11 Tuscany Bronze #14 Tuscany Bronze lassic Tuscany Bronze Octagon Wilshire Wrought Steel #1 Wrought Steel #2 Wrought Steel #3 SIDEPLATE LOKSETS Belmont olonial Delaware Missoula Modern Oval Beaded Quincy Rope Sandcast Bronze #5 Sandcast Bronze Rectangular Stainless Steel Trenton Tuscany Bronze #16 Victoria Wrought Steel #5 THUMBTURN PRIVAY LOKSETS Belmont olonial Delaware Modern Oval Beaded Quincy Rope Victoria STRETTO NARROW TRIM LOKSETS 1.5 x 5 Passage & Privacy oncord Modern Rectangular Sandcast Bronze Arched Sandcast Bronze Rectangular Stainless Steel Tuscany Bronze PASSAGE/PRIVAY LEVERSETS Aireon Argos Arts & rafts Athena Athena - Stainless Steel PAGE OLLETION Aurora Basel imarron ody ologne - Stainless Steel ortina oventry Dresden - Stainless Steel Durango Elan Geneva Hammered Helios Helios - Stainless Steel Hercules Hercules - Stainless Steel Hermes Hermes - Stainless Steel Kiel - Stainless Steel Lafayette Lariat Luzern Medici Mercury Merrimack Milano Montrose Napoli Normandy Octagon Padua Poseidon Poseidon - Stainless Steel Ribbon & Reed Rope Rustic San arlos Santa Fe Sion Stuttgart Stuttgart - Stainless Steel Teton Triton Turino Wembley Yuma PASSAGE/PRIVAY KNOBSETS Astoria lear rystal Beaded Egg Belmont Bern Bristol rystal Butte Diamond rystal Ebony Porcelain Egg Egg - Sandcast Bronze Georgetown rystal Hammered Egg Hampton Ice White Porcelain Jamestown Lancaster Lowell Madison Black Madison Ivory Melon Modern Disc rystal Modern Square rystal Norwich Octagon Octagon - Lost Wax ast Bronze Octagon - Stainless Steel Old Town lear rystal Orb PAGE , , , , , , , , , , , ,121, , , ,120,121, ,121, , ,121, ,120,121, , ,121, , , , , ,121,

187 INDEX BY OLLETION OLLETION Parma Petal Providence Providence rystal Ribbon & Reed Rope Round Round - Sandcast Bronze Round - Stainless Steel Savannah Square Victoria Waverly Winchester Windsor THUMBTURN PRIVAY FOR PASSAGE SETS Modern lassic ONTEMPORARY OLOR OLLETION Martinique ayman Aruba BAK TO BAK/ APPLIANE PULLS Alexander Bauhaus Bar Fluted Lost Wax ast Bronze Rail Sandcast Bronze Spindle Trail Trinity BAK TO BAK/DOOR PULLS 8 Art Nouveau 8 Arts & raft 8 Baden 8 Baden - Stainless Steel 8 Brisbane 8 olumn 8 Knoxville 8 Lafayette 8 Normandy 8 Nunez 8 Palermo 8 Recoleta 8 Ribbon & Reed 8 Rod 8 Rustic Modern 8 San arlos 8 Twig 8 Twist 8 Wilshire 8 Zeus 8 Zeus - Stainless Steel 12 olumn 12 Rod 12 Twist 18 olumn 18 Rod 18 San arlos 24 olumn 24 San arlos Knoxville Push/Pull Plate Modern Push/Pull Plate Petal Push/Pull Plate PAGE , ,121, , , , , ,120,121, OLLETION DOOR AESSORIES 3 Hooks with Sandcast Bronze Rectangular Plate Ball atch asement Latch oncealed Screw Surface Bolt ylinder Floor Bumper ylinder Floor Bumper with Dome ap Door Knocker - Bronze Door Knocker - Solid Brass Door Stop Door Stop - Goose Style Door Stop - Half Dome Door Viewer Doorbell Double Hook - Sandcast Bronze Double Hook - Solid Brass Double Hook - Tuscany Bronze Double Hook with Rosette - Modern Brass Double Hook with Rosette - Traditional Brass Double Hook with Rosette - Transitional Brass Dutch Door Bolt Edge Pull Extendable Baseboard Door Bumper Floor Door Bumper Flush Bolt Flush Pulls - lassic Rectangular Flush Pulls - Modern Rectangular Flush Pulls - Round Flush Pulls - Square Flush Pulls - Rectangular House Number Kickdown Door Holder Magnetic Door Stop & Holder Mail Slot Patio Door Bolt Pocket Door Lock Robe Hook - Sandcast Bronze Robe Hook - Solid Brass Robe Hook - Wrought Steel Roller atch Screen Door Lock Security Door Guard Single Hook - Sandcast Bronze Single Hook - Traditional Brass Single Hook - Transitional Brass Single Hook - Stainless Steel Single Hook - Tuscany Bronze Surface Bolt Switch Plate Wall Bumper Window Utility Pull HINGES Ball Tip for Solid Brass Hinges Ball Tip for Steel Hinges Button Tip for Solid Brass Hinges Extended Button Tip Hinge Screws Hinges Pivot Stop Steel Hinges Solid Brass Hinges Spring Hinges Square Barrel Hinges Stainless Steel Hinges Steeple Tip Set for Solid Brass Hinges Steeple Tip Set for Steel Hinges PAGE , , , ,173, ,167,168, ,177, INDEX BY OLLETION POKET DOOR MORTISE Pocket Door Mortise Lock - lassic Pocket Door Mortise Lock - Modern

188 INDEX BY OLLETION INDEX PRODUT ODE PAGE PRODUT PAGE PRODUT PAGE ODE ODE PK-9FHWS75-B PK-9FHWS PK-9FHWS75-FA PK-9FHWS75-FB PK-9FHWS75-MB PK-9FHWS75-N PK-9FHWS75-O PK-9FHWS75-P PK-9FHWS75-PN PK-9FHWS75-SB PK-9FHWS75-S PK-9FHWS75-TWB PK-10FHWS10-B PK-10FHWS PK-10FHWS10-FA PK-10FHWS10-FB PK-10FHWS10-MB PK-10FHWS10-N PK-10FHWS10-O PK-10FHWS10-P PK-10FHWS10-PN PK-10FHWS10-SB PK-10FHWS10-S PK-10FHWS10-TWB PK-12FHWS13-B PK-12FHWS PK-12FHWS13-FA PK-12FHWS13-FB PK-12FHWS13-MB PK-12FHWS13-N PK-12FHWS13-O PK-12FHWS13-P PK-12FHWS13-PN PK-12FHWS13-SB PK-12FHWS13-S PK-12FHWS13-TWB , 63-64, 86-91, TP TP , , , , , , , , , , , , , , , , , , , ,

189 INDEX BY OLLETION INDEX PRODUT ODE PAGE PRODUT PAGE PRODUT PAGE ODE ODE INDEX , , 109, 110, , 109, 110, , 109, 110, , 109, 110, , 109, 110, , , , , , , 109, 110, , , 109, 110, , 109, 110, , 109, 110, , 109, 110, , , , , , , , , , , 109, 110, , 109, 110, , 109, 110, , 109, 110, , 109, 110,

190 INDEX BY OLLETION INDEX PRODUT ODE PAGE PRODUT PAGE PRODUT PAGE ODE ODE , 127, 128, , , , , 127, 128, , 127, 128, , 127, 128, , 127, 128, , 127, 128, , , , , 127, 128, , 127, 128, , 127, 128, , 127, 128, , 127, 128, , , , , 127, 128, , 127, 128, , 127, 128, , 127, 128, , 114, 116, 118, , 115, 117, 119, , 115, 117, 119, , 115, 117, 119, , 114, 116, 118, , 114, 116, 118, , 115, 117, 119, , 115, 117, 119, , 115, 117, 119, , 114, 116, 118, , 114, 116, 118, , 114, 116, 118, , 114, 116, 118, ,115, 117, 119, , 114, 116, 118, , 115, 117, 119, , 115, 117, 119, , 115, 117, 119, , 114, 116, 118, , 114, 116, 118, , 114, 116, 118,

191 INDEX BY OLLETION INDEX PRODUT ODE PAGE PRODUT PAGE PRODUT PAGE ODE ODE INDEX , 114, 116, 118, , 115, 117, 119, , 81, , , 114, 116, 118, , 114, 116, 118, , 114, 116, 118, , ,115, 117, 119, , , , , , , , , , , , ,

192 INDEX BY OLLETION INDEX PRODUT ODE PAGE PRODUT PAGE PRODUT PAGE ODE ODE LH RH

193 INDEX BY OLLETION INDEX PRODUT ODE PAGE PRODUT PAGE PRODUT PAGE ODE ODE INDEX LH RH LH RH LH RH D D D D D D D D D D D D D D D D D D D D 178 Y4 184 Y5-ThrdMrt Y5-ThrdMrt Y5-ThrdMrt E E E E E E E E E E E E E E E E E E E E E E E E E KEYDBEXT 22 KEYLVREXT 23 L L L L L L L L L Latch28 108,123, L4-DBLH275R 181 L4-DBLH2375R 181 L4-DBLTH L4-DBLTH L4-DLB L4-DLB275R 181 L4-DLB L4-DLB2375R 181 L4-PAS28B L4-PAS28B L4-PASS_ L4-PASS_ L4-PASDV L4-PASDV L4-PRIDB L4-PRIDB L4-PRIV_ L4-PRIV_ L4-PRV28B L4-PRV28B L4-PRVDV L4-PRVDV S S S S S S S S S S S S S S S S S S S S S S S S S S S S S

194 Door Hardware Order Form Order Placed By Acct# Date Billing Information ompany Name Shipping Address ompany Name Address Address ity State, Zip ity State, Zip Telephone Telephone PO# Note QTY Product / Rosette ode Backset Handle Style Handing Door Thickness Extension / omments (LH / RH) EMTEK Products, Inc E Stafford Street ity of Industry, A Tel: Fax: Please Fax Order Form to (800) or to orders@emtek.com

195 LIFETIME LIMITED WARRANTY Subject to the terms and conditions of this warranty, Emtek Products, Inc. ( ompany ) extends a lifetime limited warranty to the original consumer user ( Original User ) of our product ( Product ) against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. This warranty only applies to the Original User of the Products. This warranty is not transferable. This warranty applies to all products sold on or after April 2, Original User: The Original User will return the defective Product to the ompany, free and clear of all liens and encumbrances, transportation prepaid, accompanied by a statement of defects and proof of purchase. What Emtek will do: Upon return of the defective Product to Emtek, Emtek s sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. THE OMPANY MAKES NO OTHER WARRANTY OTHER THAN AS EXPRESSLY STATED HEREIN, AND ALL IMPLIED WARRANTIES, INLUDING ANY WARRANTY OF MERHANTABILITY OR FITNESS FOR A PARTIULAR PURPOSE, ARE HEREBY EXLUDED. THE OMPANY S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURHASE PRIE OF THE PRODUT. IN NO EVENT SHALL THE OMPANY BE LIABLE FOR ANY ONSEQUENTIAL, INDIRET, INIDENTAL OR SPEIAL AND/OR PUNITIVE DAMAGES OF ANY NATURE ARISING FROM THE SALE OR USE OF THE PRODUT, WHETHER BASED ON ONTRAT, WARRANTY, TORT, STRIT LIABILITY, PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUH DAMAGES. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights and a buyer may also have other rights which may vary from state to state. WHAT IS NOT OVERED: THE FOLLOWING OSTS, EXPENSES AND DAMAGES ARE NOT OVERED BY THE PROVISIONS OF THIS LIMITED WARRANTY: (I) LABOR OSTS INLUDING, BUT NOT LIMITED TO, SUH OSTS AS THE REMOVAL AND RE-INSTALLATION OF PRODUT; AND (II) SHIPPING AND FREIGHT EXPENSES REQUIRED TO RETURN PRODUT TO EMTEK. THE PROVISIONS OF THIS WARRANTY DO NOT APPLY TO PRODUTS: (I) USED IN OMMERIAL APPLIATIONS; (II) USED IN OMMON AREA APPLIATIONS; (III) USED FOR PURPOSES FOR WHIH THEY ARE NOT DESIGNED OR INTENDED; (IV) WHIH HAVE BEEN SUBJETED TO ALTERATION, ABUSE, MISUSE, NEGLIGENE OR AIDENT; (V) WHIH HAVE BEEN IMPROPERLY STORED, INSTALLED, MAINTAINED OR OPERATED; (VI) WHIH HAVE BEEN USED IN VIOLATION OF WRITTEN INSTRUTIONS PROVIDED BY EMTEK; (VII) WHIH HAVE BEEN SUBJETED TO IMPROPER TEMPERATURE, HUMIDITY OR OTHER ENVIRONMENTAL ONDITIONS; OR (VIII) WHIH, BASED ON EMTEK S EXAMINATION, DO NOT DISLOSE TO EMTEK S SATISFATION NON-ONFORMANE TO THE WARRANTY. Additionally, this warranty DOES NOT OVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Warranty: Polished Brass-Lifetime and Polished Nickel-Lifetime finishes carry a lifetime limited finish warranty. There is no finish warranty on Deep Burgundy, Flat Black Patina, Medium Bronze Patina, Polished White Bronze, Rust, Silver Patina, Tumbled White Bronze, and Unlacquered Brass finishes. All other finishes carry a five year finish warranty. Warranty claims: For warranty service and shipping instructions contact customer service at: EMTEK Products, Inc E. Stafford Street ity of Industry, A Tel: (626)

196 ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience EMTEK Products, Inc E. Stafford Street ity of Industry A Tel: Fax: emtek.com BX4-MAINPRIEBK2018 OTOBER 2017