TOOLS FOR UPHOLSTERERS, AUTO TRIMMERS AWNING AND CANVAS WORKERS. All orders are accepted on the basis of price in effect at time of shipment.

Transcription

1 C. S. OSBONE & CO. ESTABLISHED 1826 Factory and Main Office 5 Jersey Street Harrison, N.J U.S.A. Fax #(973) address: cso@csosborne.com Web site address: TOOLS FO UPHOLSTEES, AUTO TIMMES AWNING AND CANVAS WOKES Since 1826, the family has dedicated itself to providing the very finest tools. Ably assisted by employees who average over ten yrs of service to the company, the seventh generation of the family still manages the firm and continues the tradition requiring strict adherence to the highest standards of quality and service. This dedication continues to put the best possible tools in the hands of the professional. OU PODUCTS tools are sold through distributors. All orders are accepted on the basis of price in effect at time of shipment. GUAANTEE We will replace, free of charge, any tool which may prove unsatisfactory in performance if sent for inspection, transportation prepaid. Tools which are known to have given rsonable service, or have been misused, or damaged, will not be considered defective.

2 All orders are accepted on the basis of price in effect at time of shipment Arch Punches 61 Awl, All Purpose,Bent 45 Awl, Automatic 46 Awl, Badminton 45 Awl, Saddler s 47 Awl, Scratch 45 Awl, Sewing 47 Awl, Stabing 47 Awl, Tennis 45 Basket Wving Tools 40 Bazooka, Filler 24 Bag, at 24 Belt Punches 64 Bone Folders 42 Button, Backs 31 Button, Combos Button, Plastic Domed 33 Button, Machines Button & Foam Cutters 22 Button Dies 29 Carboard Disk 34 Chalk, Marking 41 Chisel, Caning 40 Chisel, Bent ipping Chisel Straight Chisel, Wood 11 Claps, Tufting 38 Claw, Tools 9-10 Claw, Tack 11 Clip, Thrd 56 Clips, 3 Prong 18 Clips, EK 18 Clips, Lined BW 18 Combination Tool Collets 34 Connectors, Spring & Wire 18 Cutter, Button 22,29 Cutter Quick Clip 56 Cutter, Side Cutting Nippers Cutting Pad 59 Dies, Snap 30 Dies, Ventilator 30,41 Durable Snap Setter 69 Eyelet Setter 68 Foam Cutter, U-Cut 23 Glue Sticks 52 Grommet Die, Midget 66 Grommet Hole Cutter 65 Grommet and Washers 65 Grommet Inserting Die 65 Grommet, Kits 67 Haft, Palm Awl 47 Haft, Peg Awl 47 Haft, Sewing 47 Haft, Shoe Awl 47 Hammer Glazier 8 Hammer, Magnetic Bronze 5 Hammer, Magnetic Forged Steel 5,6 Hammer, Magnetic Tack 6 Hammer, ipping 6 Hammer, iveting 8 Hammer, Split Hd 59 Hammer, Nylon Tip 5 INDEX Hammer, Claw Tack 7 Hog ings 50 Hog ing, Pliers Hook 17 Klinch-It Tool 20 Klinch-It Fasteners 20 Knife, Bevel Point 44 Knife, Combination 43 Knife Hawkbill 43 Knife, Skiving 43 Knife, Sharp & Square Point 44 Knife, Windshield 51 Lacing Plier 52 Lifter 11 Magnetic Nail & Tack Placer 6 Mallet, Hickory 60 Mallet, awhide 59 Mallet, ubber 60 Nails, Decorative 25 Nail, Dent & No Dent 33 Nail, Spacer 25 Nail, Thrded 33 Nail, Plier 25 Needle Chart 74 Needle, Bent/Straight Pack 77 Needle, Bolster 77 Needle, Caning 40 Needle, Carpet 79 Needle, Chenille 78 Needle, Curved 76 Needle, Flocking 77 Needle, Glover s 78 Needle, Harness 78 Needle, Kits 75 Needle, Lampshade d. Pt. 76 Needle, Loop 39 Needle, Matress 76 Needle, Sewing/ Stringing 78 Needle, Sailmaker s 77 Needle, Smyrna 78 Needle, Straight 77 Needle, Tapestry 78 Needle, Tufting 38 Pin emover & esetter 23 Pincers, ipping Pinch Dogs 21 Pins, Upholstery, Tist, T, Push 73 Piping Tins 23 Pliers, BW Clip 18 Pliers, Canvas 16 Pliers, Duckbill Polywasher for superhook 34 Prong 32 Prongs Washers 32 Punch Aligning 58 Punch, Arch. Sets 62 Punch, Belt-Sets 62,64 Punch, Center 58 Punch, Drive 64 Punch, Mini-Set 63 Punch, Prick 58 Punch, evolving 58 Punch, Self-Centering, Sets 63 Punch, Solid 58 Punch, Ventilator 41 egulator, Upholsterer s 73 egulator, w/plastic Handle 73 else, Moulding Key 51 emover, Clip & Dorr Handle 51 emover, Trim Pad 51 ivets 68 ivets/ Setters 68 oller, Vinyl, Carpet Veneer 52 ule, Aluminum 21 ule, Wood 21 Sail, Palm 72 Sewing Palm 72 Sharpening Stone 43 Shrs, Wiss 54,57 Shrs, Ergo-Cut 53 Shth, Safety 44 Shells, Button 31 Skife, Knife-Blades 43 Snaps 70,71 Snap Set, Kits 69 Snap Set 69 Snap Setter only 69 Snaps ings, Plastic 33 Snips 57 Socket emover 23 Spring Bender 19 Spring End Former 19 Spring, Puller Hook 17 Spring Sprder 20 Staple Knocker 9 Staple Lifters 9,10 Staple emovers 9 Stretcher, Level Spring 17 Stretcher, Blind Stitching Sm 23 Stuffing Iron, Stuffing od 24 SuperHook, Nylon 34 Tack Strip 18 Thimbles 72 T-Nuts 19 Trim Pad emover 51 Tucking Tool 46 Tufter, Mattress Button 38 Tufter, Prong Button 39 Tufting Tool, T-Handle 39 Tufting Twine, Nylon 39 Upholstery Kits 26,27 Ventilators 41 Ventilator, Hand Setter 41 Webbing Stretcher, Metal 19 Webing Stretchers 15 Wire Cutter, Hvy Duty 20 Wire Eyes 31

3 All orders are accepted on the basis of price in effect at time of shipment NUMEICAL INDEX OSBONE PAGE OSBONE AA M 49 BUTTONS S-M 49 B-4 26 B-7 27 B CB-9 55 DB1 DB1S G1 65 G1S 66 G2 65 HB-1 26 J-7S 57 K-1 75 K K K- 75 K- 22 K- 62 K-MM 62 K K K K K K K K K K K K K-3 75 K-4 75 K-5 75 K-7 75 K M1 to M7 57 M N1, N2 65 N1S 66 S-1 55 T T TC-1 56 TC-5 56 V-1 41 W-1 28 W DS 55 2-DA BLT S 54 20LH 54 20W W 54 23T-M 49 23TP-M S , 33-H 5 36, 36-T 5 36-S S M SE / / / S 103 1/ / / PAGE OSBONE PAGE 175-M S H S SET / / OSBONE / B S X / X / /2 SE X PAGE OSBONE BP SP ( all pat. ) A A B P HL HN / PH 3/4 761W 1/2 761W 3/4 762P HP K A 801-L PAGE OSBONE 869 B P P PK D M ST STK M P B BF D ST W SS QC M T-M PAGE

4 TOOLS Over 179 Yrs THE GOLD MEDALS SHOWN ABOVE SYMBOLIZE THE PIDE TAKEN IN OU TOOLS BY SEVEN GENEATIONS OF OSBONES

5 HAMMES magnetic hammers will give long service if properly used and stored. The magnetic end must be used only for setting a tack in place. The striking end is for driving tacks home.the magnetic hd should never be left in contact with other steel objects. Should one of our hammers lose its magnetism, we will recharge free or charge it if sent prepaid to the factory. 7 OZ. HEAD BONZE MAGNETIC HAMME 33 Solid hd of bright bronze. Steel tipped at one end for permanent magnet and at the other for hammering. Balanced design, shellacked hardwood handle. of hd of hd Magnetic face Large face 5 1/2 7 1/ 4 7/ OZ. HEAD BONZE MAGNETIC HAMME 39 This hammer is similar to our popular 33 magnetic hammer but a little hvier. of hd of hd Magnetic face Large face 5 1/2 9 5/16 7/ OZ. HEAD HAMME 175-M This is the hviest hammer with a hickory handle and bronze hd. of hd of hd Magnetic face Large face 6 1/4 5/16 7/ NYLON TIP MAGNETIC HAMME FO DECOATIVE NAILS 36 This hammer is similar to our popular 33 magnetic hammer but the large face is fitted with a nylon tip. This prevents damage to ornamental nails. of hd of hd Magnetic face Large face 5 1/2 6 1/ 4 7/ Plastic tip end. Nylon tips also available separately. Part 36-T EPLACEMENT HANDLES 33-H eplacement handles for above hammers: 33, 36, 39 and 175-M Wedge included 5

6 HAMMES MAGNETIC UPHOLSTEES HAMME BALANCED 222 Forged steel. Fully polished split hd. Hickory handle. A versatile hammer used in many lther trades. Made to U.S. Government specifications. of hd of hd Magnetic face Large face Magnetic split hd LIGHT MAGNETIC UPHOLSTES HAMME 51/2 7 5/1 6 9/ S This hammer is the same as the 222 except it has an extra small 1/4 inchface. If this small size is wanted, specify 222-S. All other dimensions are the same H eplacement handles also available Forged steel. This hammer is similar to 222 but has a lighter weight hd. of hd of hd Magnetic face Large face 5 1/4 6 5/16 9/ MAGNETIC TACK HAMMES Popular weights and sizes for window trimmers, upholsterers and house hold use. Forged from our special tool steel, carefully tempered. Fully polished hd. of hd (in) of hd Magnetic face (in) Overall length (in) / 2 4 1/ / 8 5 1/ / 8 7 5/ / MAGNETIC NAIL & TACK PLACE 631 A superior quality nail or tack holder. The 5/8 octagon shank is made of stainless steel with a powerful permanent alnico magnet inserted in the tip. Can be used to set tacks in a tight place. S ize Over length Diameter of face ( oz) ch 5 1/2 5 1/ 2 3/ / IPPING HAMME 277 1/2 Forged tool steel, balanced and tough. Double edged at right angles for stripping off old fabric. A favorite with upholsterers. of hd Width of bits (lbs) 5 /16 1 1/

7 HAMMES TACK HAMME 1035 Original upholsterer hammer. Forged steel hd hardened and polished.hickory hardwood handle with hd end in round shape. Different sizes available. The magnet is inserted in the face. Finishing handle. Magnetic of hd of face (mm)& (mm) - hd (mm)& / / / / / / MAGNETIC TACK HAMME Magnetic split round end M Same as above but with magnetic split round end. Also three different sizes available. of hd (mm) - of hd Magnetic face (mm)& (mm)& (oz ) No. 8M 5-5-1/ / M 5-5-1/ / M 5-5-1/ / TACK HAMME MAGNETIC TACK HAMMES Magnetic split round end. NYLON TIP TACK HAMME Plastic tip end Upholstery hammer with spring stabilized. Hardwood handle. Forged steel hd hardened and polished. Hammer end in different round sizes. Also the length of the hd is smaller than above hammer. Magnetic of hd of face (mm)& (mm) - hd (mm)& / / / / / 2-7/ / 2-1/ / 2-1/ M Same as above but with magnetic split round end. Also different sizes are available. of hd (mm) - of hd Magnetic face (mm)& (mm)& 10M / / M / / M / / M / / M / / P Same upholstery hammer as previous but with plastic tip on one end. Tip only also available separately. Part # 1036 E of hd of Magnetic (mm) - hd face (mm)& (mm)& / 2-7/ / 2-1/

8 HAMMES HANDLES & WEDGES. Wedge GLAZIE HAMME ST eplacement hardwood handles for the 1035 and 1036 hammers. of handle (mm) & Diameter of the handle(mm) & 300mm -" 16mm - 5/8" STK eplacemente wedges for 1035 & 1036 hammers B Harwood handle. Forged steel hd fully polished. An industry standard. Accurately finished sides and face for square striking. of hd (mm) - of hd Diammeter face (mm)& (mm)& 110mm 4-1/4" 4 17mm -11/16" 300mm - " GLAZIE HAMME Supports 1066 BF Same as above glazier hammer but with stabilized spring handle. of hd (mm) - of hd Diammeter face (mm)& (mm)& Supports 110mm 4-1/4" 4 17mm -11/16" 300mm - " MAGNETIC TACK HAMME 1066 D Magnetic tack hammer with harwood handle. Forged steel hd hardened and polished with inserted magnet. of hd (mm) - of hd Diammeter face (mm)& (mm)& 110mm 4-1/4" 4 17mm -11/16" 300mm - " HANDLES & SUPPOTS 1066 ST eplacement hardwood handles with supports for above hammers. of handle (mm) & Diameter of the handle(mm) & 300mm -" 22mm - 7/8" IVETING HAMME 57 Forged steel highly polished hd. Hardwood handle. Different sizes available. of hd Diameter of face of hd ch /8 2 1/ /8 3/ /8 7/ / /4 9/ /2 5/ /4 3/

9 STAPLE/TACK EMOVES STAPLE LIFTE 0 1/2 The correct angle for removing staples of any size, from the smallest to the long leg staples and shredded material. Manufactured from top grade steel. Electronically hardened working ends. Easy to grip, plastic handle. This is a very popular model. Not recomended for pullling out tacks. Blade length 4 1/2 6 1/ STAPLE EMOVE 4 Forged from 40 alloy tempered steel. A consistently made quality product. Carefully hardened for lasting use. Blade length 2 1/ STAPLE KNOCKE 0 Staple knocker for removing staples and shredded material. Manufactured from top grade steel. Electronically hardened working ends. Easy to grip plastic handle. Used with hickory or rawhide mallets. Blade length 4 1/2 6 1/ TACK AND STAPLE EMOVE 1 This staple and tack remover is constructed with the same honest craftsman ship that goes into all tools. Can be also used for grooving out drawers so that when reglued they will stick. Made of forged steel with wooden handle. Blade length 2 1/4 6 1/ CLAW TOOL 200 Narrow at the point to get under hds of ornamental nails and tacks without harming fabric or wood. A popular upholsterer s tool. Blade length 3 1/4 7 1/ STAPLE AND TACK CLAW 201 A good quality drop forged tack claw. Pointed ends are hardened and tempered to prevent brkage. Similar to 202 but with traditional wooden handle. Flat base. Blade length 2 1/

10 STAPLE/TACK EMOVES PLASTIC AND TACK CLAW 202 A quality drop forged tack claw. Ends are hardened and tempered to prevent brkage. Similar to 201 but with rugged plastic handle for hvier use and more leverage. Blade length 2 3/4 6 3/ CLAW TOOL 2 This claw is especially designed for lifting tacks and small nails. Drop forged steel blade and hardwood handle. Blade length 2 7/8 7 1/ CLAW TOOL 3 1/2 Boss claw tool. Drop forged blade with 1/2 inch diameter shank. Amber plastic handle. Very sturdy. Blade length 2 5/ STAPLE LIFTE 763 Forged steel nickel plated with comfortable plastic red handle. Designed to dig down and to remove staples quickly. Blade length 70mm-2-1/4" 170mm-6-1/2 " CLAW TOOL 761/1 The idl tool for pulling tacks or nails. Forged steel blade, nickel plated. Hardwood pr shaped handle. Blade length 85mm- 3-1/2" 200mm- 4-1/4" CLAW TOOL 761 A Similar to our above claw tool 761/1 but longer. Blade length 110mm- 4-3/8" 220mm- 8-3/4" CLAW TOOL 761 B Similar to our 761 A but with reinforced striking end on the handle. Blade length 110mm- 4-3/8" 230mm- 9-1/8"

11 STAPLE/TACK EMOVES CLAW TOOL 761 P Similar to our 761 A but with a shinny strong plastic handle. Blade length 110mm- 4-3/8" 220mm- 8-3/4" EPLACEMENT HANDLES 761 HN 761 HL 761 HN eplacement handle for our popular 761 B.Hardwood with reinforced striking end. 761 HL eplacement handle for our popular 761W 1/2.Hardwood with reinforced striking end. 761 HN 0MM 4-3/4" HL 5mm 5" CADED TACK CLAW 6 Drop forged 1/2 tempered steel blades. Polished black plastic handle. Carded on yellow background 8-1/2 x 3-1/2. Clr plastic wrapped. Blade length 3 7/8 6 5/ STAPLE LIFTE 1066 Polished and forged steel blade. Hardwood handle. A Europn favorite. Blade length 3 5/ BENT IPPING CHISEL 339 ugged tool. Carefully hardened. Cutting edge Stock ch (lbs) 1 5/8 7/ MOULDING LIFTE 262 Forged from high quality hexagon tool steel. Hardened and tempered. Fully nickel plated. Individually boxed. Stock 10 1/2 1/

12 CHISELS IPPING CHISEL 402 A translucent amber handle for quick identification. Perfect balance. Forged steel blade with correct angle on chisel edge. Shouldered tang, tough construction. Overall Width of edge 8-3/4 9/ BENT IPPING CHISEL 761W 1/2 Forged steel blade. Hardwood handle with reinforced striking end bent at the correct angle. Nickel plated. Blade length BENT IPPING CHISEL 761PH 1/2 Similar to our 761W 1/2 but with durable plastic handle idl for stronger work. Blade length BENT IPPING CHISEL 761W 3/4 Similar to our 761W 1/2 but with claw in blade. Blade length BENT IPPING CHISEL 761PH 3/4 Similar to our 761W 3/4 but with durable plastic handle idl for stronger work. Blade length 5mm- 5" 245mm-9-3/4 " mm- 5" 245mm-9-3/4 " mm- 5" 245mm-9-3/4 " mm- 5" 235mm-9-5/8 " STAIGHT IPPING CHISEL 762 P Straight ripping chisel. Forged steel blade. Nickel plated with strong plastic handle for better use. Blade length 5mm-5" 230mm-9-1/8 " COMBINATION TOOL 402 1/2 A butifully finished tool with a translucent amber handle designed to fit the hand with perfect balance. Forged highly polished steel blade. Shouldered tang to prevent driving into handle. Combined ripping tool and tack puller. Blade length 3 3/4 8 1/

13 CUTTING NIPPES PINCES, FLUSH CUT 93 A rugged forged steel pincer for hvy ripping. Polished flush cut jaws for getting close to a flat surface END CUTTING NIPPE 94 An excellent small nipper. Made of drop forged steel. Black finish, polished jaws. Flush cut. 6 3/ DIAGONAL CUTTING NIPPES 91 These rugged drop forged nippers are idl for cutting hog rings and wire. Polished hd, black handles, finest industrial quality. ed plastic grips. 7 3/ DIAGONAL CUTTING NIPPES 3377 These rugged drop forged nippers are idl for cutting hog rings and wire. Polished hd, black handles, finest industrial quality. ed plastic grips. 6 7/

14 CUTTING NIPPES SIDE CUTTE-STAPLE EMOVE 787 A Forged steel with extra long, pointed cutter. Polished hd with vinyl handles. Depth of hd aids in removing staples. This is the famous Europn vienner. TOP VIEW 165mm- 6-1/2" FONT VIEW DUCK BILL PLIES DB1(Serrated jaw) and DB1-S(Smooth jaw) Made of mallble iron. Jaw width extra wide. Special small finger crook. Nickel plated, popular style. Also available with smooth jaw. Width of jaw (smooth jaw) DUCK BILL PLIES 98 and 98-S Finest professional quality. These pliers are drop forged from high carbon steel. The jaws are hardened, tempered and carefully polished. They are idl for stretching material in tight place where space is too limited for using the ordinary stretching pliers. Also available with smooth jaw 98-S with Width of jaw N o. (smooth jaw) 6 1/2 3/

15 STETCHES GOOSENECK WEBBING STETCHE 253 A hand stretcher to catch the webbing close to the frame with plenty of leverage. Equally efficient for rigth or left hand. Extra sturdy construction. Approved favorite ubber piece for above Webbing Stretcher Width Gooseneck Webbing Stretcher being used with our popular Magnetic Hammer 33. WEBBING STETCHE (ubber End) 255 Webbing stretcher made of hardwood maple with corrugated rubber at one end, and one row of 6 sharpened steel pins at other end. Width 8 3 1/ PLASTIC STETCHE (Groove End) 869 B Same as above but without rubber piece on one end. Also it has a groove at the the other end which provides better secure when stretching the material. (mm)& Width (mm) & (inch) / / Groove End 15

16 STETCHES WEBBING STETCHE (Groove End) 869 P Made of hard durable plastic which make it lighter. (mm)& Width (mm) & (inch) / / Groove End WEBBING, CANVAS PLIE 250 Made with hammer jaw, the hammer acts as a lever if a strong pull is required. Excellent tool for stretching canvas and lther as well as webing. Width of jaw 8 1/2 3 3/ WEBBING, CANVAS PLIE 251 Similar to our above popular 250 Webbing, Canvas Plier but with short jaw. Width of jaw 8 1/2 1 1/ CANVAS STETCHING PLIE 249 This pliers designed for today's trend to the cln line (or "hard edge") look of canvas made taut over three sides of its wooden stretcher frame. Parallel extensions permit pressure to be applied to the inner side of the wooden stretcher. Works also on hvy and primed canvas. Width of jaw 9 3 3/

17 STETCHES WEBBING STETCHE 252 A handy tool for stretching sagless webbing and punched metal strip webbing. W idth ( inches) 9 3 1/ WEBBING STETCHE 205 Safe - No sharp teeth, English Pattern Webbing Stretcher. Used widely in Grt Britain. Made of American Hard ock Maple. Finely finished. Toughest quality. Can be used with any webbing. Hole /8 x 1/ UBBE & ELASTIC WEBBING STETCHE 263 This sturdy stretcher grips without spikes, stretches accurately and evenly. Protects edges of furniture from being marred. Design for rubber webbing but can be used on any webbing. Width 9 3/4 4 1/ CLIP FO UBBE WEBBING 239 Metal clips used for rubber webbing job. Polished and excellent quality. Packed in two different quantities. Each per box bx(lbs) S / L / HOOK 264 Hook for pulling 239 clips on Elastic and ubber Webbing. Width 6 3/ LEVE SPING STETCHE 268 This sturdy tool is used for hvy duty installations and is a safe method for installing sinuous type springs. Just set spring into rr frame clip and then pull spring into position from the front of the frame. Width of handle 17 1/ SPING PULLE HOOK 297 Can be used in conjunction with the 268 Lever Spring Stretcher or by itself. Width of handle 4 1/4 3 1/

18 TOOLS SPING CLIP PLIES A special pliers for three prong setting spring or edge wire clips. A grt saver. 445 regular sets Kay or Baker clips BW CLIP PLIE 522 New and improved, *this sturdy quality tools is specially designed for rapid closing of 1/4 : cushion spring (two 8 gauge wire) clips. Contoured handle provides good grip CLIPS 3 PONG CLIP EK CLIP High quality three prong clips for use with our Spring Clip Pliers High quality EK Clips. Also they are packed 250 clips to a box To be use to attach zig-zag springs, edge springs and torsion springs to border and edge wires. lined BW Clips won t squk. Solid steel construction. 522 BW Clip Plier are specially designed for closing BW Clips. Width per box(lbs) Each per box / 8 1/ / 8 1/ LINED BW-CLIP / 8 7/ 8 3 1/ / 8 7/ / 8 1/ / 8 1/ TACK STIP Staple or tack over edge of fabric to provide a firm even edge. 1/2 wide. Comes in a roll of 2 yards. s 3 lbs SPING AND WIE CONNECTOS 1776 For furniture and auto st springs. Fixes broken st springs and edge wires in minutes. Allen hollow hd set screws in hvy tubing for maximum grip. Each set includes: 8 straight connectors, one 90 degrees connector and one 45 degrees connector plus Allen key. 6. Also sold separately. Plse specify size or set when ordering. Width 1776 SE T 3/ S 2 3/ / /

19 TOOLS T-NUTS 5900 High quality T-Nuts cln cut thrd for sy installation of legs, casters, etc. Hold fast in any type or wood. Hole Width per box(lbs) Each per box / 8 5/ /4-20 5/ 8 3/ / / 8 3/ SPING BENDE 401 Spring bender, which is both simple in application and efficient in use. Nickel plated ends are slotted to fit loops which can be bent with slight pressure or can be used to unbend previously made bends. This is precisely manufactured so that arcs, angles or curves can be properly made. Available in two sizes. two is not only used on auto sts but also on new furniture. Plse specify size when ordering. S ize (lb) 1 3/8 x /8 x SPING END FOME 404 Crimps the end of zig-zag springs and open end coil springs. A tough tool to make work sy. Comes with three bolts and nuts. Bolt to corner of bench or on a 1 block no more than 5 from edge of bench. Can be used in a vise. Drill 5/16 holes 1-3/4 apart. Overall length Width 1/ METAL WEBBING STETCHE (4 IN ONE TOOL) 258 A versatile all metal tool for stretching various types of metal webbing, sagless springs, punched straps, etc. Flat handle gives lots of leverage. Width (lbs) 9 1/2 2 1/ 4 1 1/

20 TOOLS KLINCH-IT TOOL 720 Quick and sy to use. Klinch-it lowers your production cost and incrses your production by speeding up one of the grtest time-consuming operations. It eliminates the slow, old fashioned method of sewing springs to the web base. Instd the springs are permanently fastened with sturdy steel clips. Easy to use instructions Fill magazine with 2 strips of fasteners, hold tools upright, place nozzle over spring, press down so that prongs of the fastener pierce the webbing,then squeeze lever and fastening is finished. W idth ( inches) (lbs) / KLINCH-IT FASTENES HEAVY DUTTY WIE CUTTE 7200 Klinch-it fasteners to be used with our 720 Klinch-it tool. Made of high quality steel. Perfect fasteners for furniture use. Packed 5000 per box. per box is of 5000 is 8 1/2 lbs This work station sire cutter can be permanently benchmounted or bolted to a plank, for sy transportation to a job site. Consists of a 3 x 6 base with a 21 long handle. Cuts 1/4 (6mm) medium, hard and non-alloy chain metals. Then right tool for cutting zig-zag springs, etc. Base (lbs) 3 x / WIE FOME 1963 A tough tool that makes difficult repairs sy. You can quickly bend the ends of no sags, edgewise and form springs right on the spot, making offsets where you need them. Can be rdily mounted in a vise for duplicating complex repetitive wire bends. Designed with ht-hardened steel to give long live. W idth ( inches) (lbs) / DOUBLE WEDGE SPING SPEADE 999 For separating double coil platform rocker assembly while attaching to frame. W idth ( inches) (lbs) 4 5/8 1 3/ 8 1 1/

21 PINCH DOGS/ULES PATTEN AND CABINET MAKES STEEL PINCH DOGS 89 Made from the finest quality high carbon steel. Hardened and tempered for the long duration. Square corners over edges make sy driving. Different sizes available. 3/4 3/ /4 11/ /2 11/ /2 21/ /4 23/ /2 31/ ALUMINUM ULE (inches and metric) 161 Made of anodized aluminum. One side shows graduation in inches along both edges with msurements also from center of rule. When turned over, the opposite side of the rule has graduations in metric along one side. Hole on one end for hanging display. Width Thickness 60 11/ 2 1/ ALUMINUM STAIGHT EDGE ULE ALUMINUM STAIGHT EDGE ULE 60SE This is one of the finest msuring rules on the market. Markings on one side only. Hvy wide aluminum. Hole punched on one end for hanging display. 0 Width Thickness 6 2 1/ One edge for standard msurements, one edge for metric. Sturdy and wide - just right for marking selvage edge of cloth. Scales etched in black on silver background, one side only. Finish anodized for permanence. Three lengths available. Hole punched on one end for hanging display. Width Thickness / 2 1/ / 2 1/ / 2 1/ WOOD ULE 160 Made from properly dried northern hard maple to meet all state msuring standards. Smooth finished in clr lacquer. Has 1/8" calibrations. Brass ends. Hole punched on both ends for hanging display. S ize W idth Thicknes s ( inches) 5C / 4 1/ C / 4 1/

22 FABIC & FOAM CUTTES FABIC CUTTES FO BUTTONS BUTTON AND FOAM CUTTES For perfect Buttons and Easier Poly Foam Tufting Polished, high quality and sharpen with the best technique. Cuts up to 30 buttons at time. Additional sizes upon request. B utton Diammeter of button Diameter of Cutter ch -22 1/ / 4 1 1/ / 8 1 7/ / / 4 1 3/ W Wood Jig 576 FOAM CUTTES Button Diameter of Cutter ch 1/2 1/ /4 3/ /8 7/ /8 1 1/ /4 1 1/ Same as above cutters but with some more sizes. Can be ordered either way. 1 1/2 1 1/ /4 1 3/ /8 1 7/ BUTTON AND FOAM CUTTE KIT K- Kit contains 1, 1 1/4, 1 1/2 diameter cutters with jig and ejector rod. Cuts fabric, vinyl, poly, foam and other soft materials. For use in a standard 1/4 or 3/8 electric drill. Cutters have special carbonized hardened edge. s approximately two pounds WOOD JIG -W Hardwood jig sold separately also. Idl for better results and perfect cuts. W idth ( inches) /

23 TOOLS U-CUT FOAM & UBBE SLICE W idth ( inches) (lbs) / BLIND STITCHING SEAM STETCHE 410 U-Cut is fast, flexible and flexible. Place U-Cut on a table or on a flat surface with the slab of material to be cut. The desired cutting thickness is quickly obtained by mns of an adjustable screw setting. The operator then merely pushes and pulls U-Cut in a saw-like action and, make wedges, curves, arcs and other special shapes. See illustrations. These are used particularly for orthopedic sting in autos, as well as furniture. U-Cut will cut from a minimum of 1/4 to a maximum thickness of 9. Material up to 36 in width and unlimited length can be processed. Pieces can be glue salvagble material. Extra blades available. OSBONE 410-B Made of light aluminum, simple toggle clamp construction. Easy to operate. Minimum length for pillows, maximum length 3 ft. igid when in use. Can also be used as calipers for cutting large circles and for blind stitching. Easy to follow instructions on ch package. Points sily replaced high quality tool. (onz) PIN EMOVE & PIN ESETTE 96 For use with La-Z Boy Chair. This unique tool does a complete job. emoves and resets. Permits sy access to retaining key pin. One shot in and out. W idth ( inches) PIPING O CHANNELING TINS 4 These 36 long piping tins are made of smooth aluminum. Stuffing channeling. No burs to catch on fabrics, the material is soft so tins can be bent and adjusted. Comes in three different sizes for your best convenient. Plse specify size when ordering. S ize W idth ( inches) pr CASTO SOCKET EMOVE Tip 87 Hardened thrded end that securely screws into socket. Slide hammer knocks it out. Work with our T-NUTS W idth ( inches) (lbs) 1/2 1 1/ 2 1 1/ Tips also available separately. Part 87-TIP

24 TOOLS TIMMES S STUFFING ION 118 A stuffing iron made specially for the trimmer. Hand forged fine quality steel, polished complete. Top quality. Width FLAT STUFFING OD 119 Forged steel stuffing rod. Slight curve at working end. Flexible 16 inches. Width at points 5/8 inches. Top quality. Width 16 5/ PESSED STEEL STUFFING ION 40M-18 A utilitarian stuffing iron, 18 long. Crsed in the center to give rigidity. FILLE BAZOOKA SAVE TIME AND MONEY WITH THIS HIGH PEFOMANCE JET STEAM. 302 Now fill cushions, pillows, pillows backs, mattresses, mattress pads and much more the sy way. Turn tedious job into a simple one by placing the back end of the Bazooka just above the loose filler container and the front end into the item to be filled. In seconds, the Bazooka literally sucks the loose filler into the sleeve being filled, saving approximately 98% of the mess and waste. It s also a vacuum clner. * Can be used with down, kapok, shredded foam, styrofoam pellets and other loose materials. * Bright, lightweight aluminum - 28 length, 2 outside diameter. * Operates on 60 to 90 lbs. of pressure. * Completely assembled and rdy for immediate use. Diammeter of end (lbs) AT BAG 303 Filter Sock. Comes assembled with ties rdy to be attached to the end of the Bazooka. It is made out of eemay (nonwoven) media similar to quilt matting. It has an inside diameter of 6. Width /

25 NAILS QUICK NAILE 777 FANCY NAIL SPACE FO SPACING ANTIQUE NAILS. Set up to 5 nails hd to hd at one time without damaging the furniture, or your fingers. Exact spacing at the same time! Load large end of tool making sure nails are perpendicular to and shanks are flush with base of tool. Position tunneled section of tool over last nail driven and being setting nail. emoval of tool may require twisting motion and/or pressure against nail hds with free hand. Use 36 Nylon tip hammer for best results. End Width (oz ) No. 7 31/ Patent ANTIQUE NAIL PLIE 601 Hardened steel, top quality. Very convenient size for your removing antique nails. Width 7 / DECOATIVE NAILS quality steel nails with natural brass finish. Plse specify length and style. Each pattern should be ordered by length of nail. They are packed 1000 ch per box. per box 2 lbs. Typ e s 1M Nails per box 1M Nails per box, packed 1C per poly bag Poly Bag (plse designate by using style number + " S ") 680 Oxford Hammered 1/2" 5/8" 3/4" S French Natural Small 1 /2" 452 3/4" /8" S French * Natural egular 1 /2" 462 3/4" /8" S Daisy Ornamental 1 /2" 482 3/4" /8" S Overlap 1 /2" 5 /8" 3/4" S Spanish Lg. 5/8" dia. 1/2" S 499 * 682, also available in nickel plated. 25

26 UPHOLSTEY KITS STATE UPHOLSTEY KIT HB-1 A basic home upholstery kit to repair sagging springs or rebuild a chair or sofa. Excellent for students and hobbyists. Professional box cover pictures all tools. Box is designed for hang up display. Weighs 1-1/2 lbs EACH KIT CONTAINS Quantity ch Descriptio n C Magnetic Hamme r Webbing Stretche r Tack Cla w /2 3 Curved Needl e /2 6 Curved Needl e Straight Needl e Upholstery Pin s B-1 Boo k Instruction Bookle t 04 4 DO IT YOUSELF KIT B-4 The perfect kit for the upholstery work. Includes sy to follow instruction booklet. Professionally boxed for hang up display. The box cover pictures all tools in kit. Weighs 1-1/2 lbs EACH KIT CONTAINS Quantity No. e ach Descriptio n No C Tack Hamme r Webbing Stretche r Claw Too l Straight Needle 6" /2 3 Curved Uph. Needle 3" /2 4 Curved. Uph. Needle 4" B-1 Boo k Instruction Bookle t

27 UPHOLSTEY KITS INTEMEDIATE UPHOLSTEY KIT B-11 This kit contains the basic tools and needles required for reupholstery work, but in it, we have eliminated a few of the more expensive professional items in order to bring the cost down to a more popular level for use by schools or other institutions. It serves as an intermediate kit between our popular B-1Upholstery Kit and the B- 7 Pro Upholstery Kit. Professional box cover pictures all tools in kit. Weighs 2-1/2 lbs EACH KIT CONTAINS Quantity No. e ach Descriptio n No C Tack Hamme r Gooseneck Webbing Stretche r / 2 Staple Lifte r ipping Chise l / 2 Square Point Knif e egulato r /2 3 Curved Needl e /2 4 Curved Needl e /2 6 Curved Needl e /2 4 Curved Needl e Straight Needl e " Shr s " Upholstery Pin s W H Taylor Chalk - Whit e B- 1 Instruction Bookle t 04 4 PO UPHOLSTEY KIT B-7 This all-inclusive kit fills the needs of the journey man upholsterer, the trainee and the ambitious amateur. It contains twelve items of top quality C.S. tools and needles, also free instruction booklet. Professionally boxed. Box cover pictures all tools. Weighs 5 lbs EACH KIT CONTAINS Quantity ch Descriptio n 1 33 Bronze Magnetic Hamme r Gooseneck Webbing Stretche r / 2 Staple Lifte r ipping Chise l / 2 Square Point Knif e White ubber Malle t /2 8 Light egulator 8" 9 Gaug e K- 3 1 K- 5 Needle Car d Needle Car d " Shr s " Upholstery Pin s W H Taylor Chalk - Whit e B- 1 Instruction Bookle t

28 BUTTON MACHINES # 22 9/16 Dia. # 24 5/8" Dia. # 30 3/4" Dia. # 36 7/8" Dia. # 40 1" Dia. # /8" Dia. # /4" Dia. # /2" Dia. Button Chart - Actual size. 1 HAND BUTTON COVEING MACHINE What is equired to Cover Buttons?? FIST, A Button Covering and Cutting Machine (see below). SECOND, Steel Cutters and Covering Dies(see page 29-30). A separate set of dies is required to make ch size of button to get a perfect finished of quality. Always use the correct top die for your material. THID, Buttons Molds (see page 36). A complete mold necessary to make a button consists of a shell and a back. The shell is covered and crimped around the back by the die. Always use the correct shell for your material. CHAT OF BUTTON SIZES The standard msurement for buttons is 40 lignes per inch. Therefore size 30 is 3/4, size 60 is 1-1/2, etc. Dimensions shown are for buttons before covering. W-1 High quality hand machine. Cuts fabric and covers buttons. Use 2 pcs. Die and short cutters. The 1 Button machine has a reinforced frame and handle. Bolts to a table for added stability. Comes complete with a wood block for cutting covers. It produce 80 to 0 buttons per hour. Also used to set snaps, grommets and ventilators. Wood block and dowel can be also purchased separately. Dies for setting snaps,grommets, ventilators are also available. O sborne No. Heigh t (lbs ) No. W EXTA PATS Descriptio n W-1H W-1P W-1PL W-1 Spring Handle for#1 Machin e Pin for # 1 Machin e Plate for # 1 Machin e Top Spring for W-1 Machin e HAND BUTTON COVEING MACHINE W-2 Same as our popular W-1 Button machine but faster. Used with 3 piece Swivel Dies and long cutters for fast production. Hvy ribbed construction Long handle for extra leverage. Comfortable plastic handle grip allow operator to work at higher speed. Makes a production of buttons per hour. Also used to set snaps, grommets and ventilators. Dies for setting snaps and grommets are also available. Height (lbs) EXTA PATS Descriptio n W-2 Spring W-2H Top spring for Machine Handle for Machine

29 DIES&CUTTE SETS BUTTON DIES All dies are precision machined, nickel plated and made of high quality steel. Cutters are ht trted and have sharp edges engineered for accurate cutting and long life. TYPE AND SIZE: The Button Machine 1 uses 2 pcs. The 2 uses 3 pcs. Dies. MATEIAL THICKNESS. Always buy a set of dies made exactly for your material thickness. If you have a variety of material thickness, you will need more than one set of dies. Trying to cover very thin and very thick material with the same set of dies will result in poor quality buttons. If you are not sure what dies to buy, send us a sample of your material and we will assist you in the proper selection. Description Die Designation TO SELECT THE POPE DIE USE THIS TABLE Light Material egular Material Hvy Material LU HU HUX DIE WITH CUTTE SETS. Sets of Dies with Cutters are most popular. Sets are available for W-1 Button machine, which uses the 2 piece dies with short cutter, and for W-1, which uses 3 piece dies with long cutter. When you order, make sure to specify the type of material : HU, HUX or LU, depending on thickness of the material to be used. Following are the part numbers for HU dies with cutter for W-1 and W-2 Button Machines. USED WITH W-1 BUTTON COVEING MACHINE 2 PIECE DIE & CUTTE SET 2 PCS. DIE " HU " AND CUTTE FO W-1(ALSO AVAILABLE IN "LU" AND "HUX") WDIHUC22 2 WDIHUC24 2 WDIHUC30 2 WDIHUC36 2 WDIHUC40 2 WDIHUC45 2 WDIHUC50 2 WDIHUC USED WITH W-2 BUTTON COVEING MACHINE 3 PCS. DIE " HU " AND CUTTE FO W-2 WDIHUC22 3 WDIHUC24 3 WDIHUC30 3 WDIHUC36 3 WDIHUC40 3 WDIHUC45 3 WDIHUC50 3 WDIHUC * Also available in LU AND HUX 3 PIECE DIE & CUTTE SET SHOT CUTTE LONG CUTTE 1-3/8 4-1/2 Cutters are also available individually. High quality steel hardened and tempered assures long life. Sharp edges engineered for accuracy. The short cutter is used to cut the fabric. Works with our W-1. SHOT CUTTE ONLY FO W-1 BUTTON COVEING MACHINE WCSL22 WCUS2 4 WCUS3 0 WCUS3 6 WCUS4 0 WCUS4 5 WCUS5 0 WCUS High quality steel hardened and tempered assures long life. Sharp edges engineered for accuracy. The long cutter is used to cut the fabric. Works with our W-2. LONG CUTTE ONLY FO W-2 BUTTON COVEING MACHINE WCUL2 2 WCUL2 4 WCUL3 0 WCUL3 6 WCUL4 0 WCUL4 5 WCUL5 0 WCUL

30 DIE SETS DIE WITH CUTTE SETS. Button dies are also available individually for all three type of material HU, HUX or LU for both button machines W-1 and W-2. Plse specify the thickness when ordering. Following are the part numbers for HU dies. USED WITH W-1 BUTTON COVEING MACHINE 2 PIECE DIES 2 PCS. DIE " HU " AND CUTTE FO W-1(ALSO AVAILABLE IN "LU" AND "HUX") WDIHUC22 2 WDIHUC24 2 WDIHUC30 2 WDIHUC36 2 WDIHUC40 2 WDIHUC45 2 WDIHUC50 2 WDIHUC USED WITH W-2 BUTTON COVEING MACHINE 3 PIECE DIES 3 PCS. DIE " HU " ONLY (ALSO AVAILABLE IN LU AND HUX). WDIHU22 3 WDIHU24 3 WDIHU30 3 WDIHU36 3 WDIHU40 3 WDIHU45 3 WDIHU50 3 WDIHU GOMMET DIES High quality dies to set grommets. Different sizes available. These grommet dies work only with our W-1 Button Machine. Prices available upon request for Grommet Dies for W-2 Machine sizes 0-5. SNAP DIES These dies are used for setting three and four piece snaps. Available for our W-2 and W-2 Machines. Plse specify type when ordering. 4 pcs. Dies SNAP DIES FO FOU PIECE SNAPS WDISN4 1 WDISN Work with W-1 W-2 SNAP DIES FO THEE PIECE SNAPS WDISN3 1 WDISN Work with W-1 W-2 2 pcs. Dies VENTILATO DIES Precision machined. High quality steel. Used to set ventilators with our W-1 Button Machine. Ventilator Dies 30

31 BUTTONS WIE EYE BUTTONS BACKS ONLY High quality buttons backs also called Wire Eye. Two styles available: 9 and 44. Wire eye 9 Standard has a hvy eye and will withstand a hvy pullout test. The 44 has a smaller eye and is intended to be used against delicated material to minimize piercing and runs. Uniform Dimensions. Smooth edges help avoid cutting even the most difficult materials. # 9 Strong wire eye. Large opening for se of thrding tufting twine. Perfectly rounded loop won t fray twine. # 44 The wire eye is a little smaller, and specially designed to prevent fabric damage and pull through in delicated materials. 9 WIE EYE BUTTON BACK ONLY 5 GOSS BOX(ALSO AVAILABLE IN 1, 25 AND 50 GOSS BOXES) WIE EYE BUTTONS BACK ONLY 5 GOSS BOX(ALSO AVAILABLE IN 1, 25 AND 50 GOSS BOXES). WSH22-5 WSH24-5 WSH30-5 WSH36-5 WSH40-5 WSH45-5 WSH50-5 WSH60-5 WWE229-5 WWE249-5 WWE309-5 WW369-5 WWE409-5 WWE459-5 WWE509-5 WWE609-5 WWE WWE WWE WW WWE WWE WWE WWE SHELLS High quality Shells which are the top part of button. We offer four kinds of shells: ALUMINUM Shells, UST ESISTANT Shells, EGULA Shells and BLACK SOFT Shells. Black Soft Shells are the most popular since they prevent tring of the materials. ust esistant Shells minimize rusting problems and the resultant damage to the upholstery. We sell shells in four quantities: 1, 5, 25 and 50 gross boxes. The most popular quantity is 5 gross box. Plse specify when ordering; if not we will ship 5 gross boxes. BLACK OXIDE SOFT SHELL 5 GOSS BOX (ALSO AVAILABLE IN 1, 25 & 50 GOSS BOX) Black Soft Shell EGULA SHELL 5 GOSS BOX(ALSO AVAILABLE IN 1, 25 AND 50 GOSS BOXES) ust Proof Shell ALUMINUM SHELL 5 GOSS BOX(ALSO AVAILABLE IN 1, 25 & 50 GOSS BOX) Aluminum Shell UST POOF PLATED SHELL 5 GOSS BOX (ALSO AVAILABLE IN 1, 25 & 50 GOSS BOX). WSHS22-5 WSHS24-5 WSHS30-5 WSHS36-5 WSHS40-5 WSHS45-5 WSHS50-5 WSHS60-5 WSH22-5 WSH24-5 WSH30-5 WSH36-5 WSH40-5 WSH45-5 WSH50-5 WSH60-5 WSHA22-5 WSHA24-5 WSHA30-5 WSHA36-5 WSHA40-5 WSHA45-5 WSHA50-5 WSHA egular Shell 31

32 PONGS/WASHES PONG Also known as Clinch Buttons. Grt for high speed production. Used on hdboards, bars, restaurant booths and wide range of furniture styles. Very effective for pre-tufting of covers before attachment to the furniture frame. Shell with material ound edge helps prevent holes from enlarging after application. Staked edges are rounded to prevent material from tring. Wire is precision tempered. Just the right hardness to keep prongs from pulling out, yet sy for your installer to bend. Prong wire is solidly staked to collet for safety and se of installation. Leg is longer for se of bending. PONGS FIVE GOSS BOX (ALSO AVAILABLE IN 1, 25 AND 50 GOSS BOX) Lenght 1 1/ / / 2 1 1/ / 2 3 PONGS FIVE GOSS BOX (ALSO AVAILABLE IN 1, 25 AND 50 GOSS BOX). WWAM1-5 WWAM8-5 WWAF8-5 WWASP10-5 WWASP15-5 WP221-5 WP222-5 WP222-5 WP242-5 WP242-5 WP301-5 WP302-5 WP302-5 WP303-5 WP361-5 WP362-5 WP362-5 WP362-5 WP401-5 WP402-5 WP Lenght(inch) 1 1/ / / 2 1 1/ 2 2 PONG WASHES Use for extra safety in preventing prongs from pulling out. Different sizes available for best results. Prong shown with washer PONG WASHES 5 GOSS BOX(Also availbe in 1, 25 & 50 gross box). Description Metal Washer# 1 Metal Washer # 3 Fibre Washer # 5 Spring Washer # 10 Spring Washer # 15 D. (inch) 1 1 3/ 8 1 3/ 8 5/16 x 7/ 8 15/16 (PLEASE CHANGE LAST NUMBE TO SPECIFY QUAN- TITY WHEN ODEING 1, 25 O 50 GOSS). 32 Metal 1 1 Washer Beveled for additional strength. Metal 1 3/8 3 Washer Extra wide, more holding ar. Metal 5/16 x7/8 10 Spring Metal Washer For use with thrded nails. Perfect for working nr edges or corners. Metal 15/16 15 Spring Washer Precision tempered springs steel. Fibre 1 3/8 5 Washer Fibre Washer is strong and squk proof

33 THEADED NAILS THEADED NAILS Nail is rigidly welded to no dent collet. (For use with Spring Washer) When anchored with a spring lock washer, the Thrded Nail is a fast, positive, alternative to prong tufting. Just insert the nail through the upholstered construction and fasten in on the back with a spring washer. Deep thrds are designed so washer slides on sy, yet can t pull off. Thrded nail & Spring washer Plse specify quantity when ordering. THEADED NAILS 5 GOSS BOX (ALSO AVAILABLE IN 1, 25 & 50 GOSS BOX). WTN WTN221-5 WTN222-5 WTN WTN WTN301-5 WTN302-5 WTN WTN361-5 WTN Lenght(inch) 7/ 8 1-1/ 2 2 7/ 8 7/ 8 1-1/ 2 2 7/ 8 1-1/ 2 2 COUGATED NAILS ( no dent ) No dent collect. Nail is securely welded to collet. Hardened steel. Nail thickness Hardened and tempered steel nail. For driving into wood. Buttons are driven through fabric and foam directly into frame. Small corrugations allow for sy driving, help prevent buttons from pulling out. No dent collet. Nail is securely welded to collet. Plse specify quantity when ordering. NAIL BUTTON DIVING TOOL 915 Has a concave hd to prevent the nail button from being damaged when hammered. Specify the size of your button when ordering. UNASSEMBLED NYLON SNAPS Shell Also called Plastic Snaps ings. Two different sizes available. Idl for use on furniture, recrtional vehicles, manufactured housing, etc. This nylon back is specially designed to snap onto a Durable Wood Screw or Durable Snap when covered. This provides a secured hold with little chance of rust or discoloration. Sold with and without shells. Snap ing Plse specify quantity when ordering. PLASTIC DOMED BUTTON dy to use button. 40 available only. Made of Nylon one piece construction. Available in: dark brown, beige and white. 33

34 SUPE HOOK PLASTIC SUPE HOOK, PATENTED Applicable on : reversible cushions, nonreversible cushions, tight sts, chair backs, bolsters, hassocks, etc. Fast installation, low cost, perfect tufting depth every time. Knots won t come untied due to operator fatigue. Loops and super clips are pre-msured, rdy-to-use. 1. BUTTON SITS FLAT Tapered shank allow button to sit flat. 2. INSTALLS FASTE Exclusive slope design guides loop into hook with one pass. Cuts production time, cuts costs. 3. WON T IDE UP Curved double snubbers keep loop from riding up into lock channels. 4. NO FAYING Smooth edges will not fray twine. 5. EXTA HOLDING POWE ibbed nylon exerts additional pressure to hold finished buttons together. 6. IT S STONGE Extra high impact nylon, solid one-piece, for added strength. 7. HOLDS TIGHTE Grooved rim helps hold material and shell tight to the collet. Grt for vinyl. Puts the stop on popoffs. 8. WON T WOK LOOSE Double lock channels further restrict loop from ever ridding up. PLASTIC SUPEHOOK 5 GOSS BOX(also in 1, 25 & 50 gr. box) POLY WASHE FO SUPE HOOK Made of fibre. Idl washer for super hook buttons. It has one inch diameter. Grt holding power. Available in 1, 25 and 50 gross box. UNASSEMBLED NAIL O TACK MOLD ADVANTAGES: Costs, less than a pre-assembled nail, used with special tacks or nails. Your supply the nail or tack of your choice. COVEING OPEATION: Collet (button back) is placed in die. Nail (or tack) is inserted through hole in collect. Cardboard Wad is place on top of the nail. Covering is then completed in the usual manner. COLLETS 5 GOSS BOX (ALSO AVAILABLE IN 1, 25 & 50 G. BOX). Shell Collet Plse specify quantity when ordering. CADBOAD DISCK 5 GOSS BOX(ALSO AVAILABLE IN 1,25 & 50 G. BOX). WCO22-5 WCO30-5 WCO36-5 WCO40-5 WCO45-5 WPSH22-5 WPSH30-5 WPSH36-5 WPSH45-5 WCW22-5 WCW30-5 WCW36-5 WCW40-5 Cardboard disck

35 W-1 BUTTON MACHINE 1.- Place material on the wood block. Lay cutter on material. Pull on handle to cut button covers. Fold or stack material to cut more pieces at the time. 2.- Turn top of the two piece die. Place the cut material on the die, then center the shell on top of the material as shown in the picture. 3.- Holding the die use the wood dowel to push the shell in. 4.-Lay wire eye on the bottom die with the loop facing down. 5.- Place the two piece die together on the machine. Lock in the bottom piece die with the Allen wrench key provided. 6.- Firmly press on handle to close the button. 7.- A secure button is completed 35

36 BUTTONS/COMBOS COMBOS The COMPLETE BUTTON consists in a SHELL and any kind and type of back like Wire Eye, etc. When you are ordering make sure you state whether you want the complete button or just one part of it. The complete button number starts with WCM then the size of the button, then the letter of the backs (like WE for wire eye or NDN for no dent nail, etc.), then the type of shell (like SS for soft shell, for ust esistent, etc.) and finally the quantity pack (1G for one gross box or 5G for 5 gross box). WCM= COMBO WE= WIE EYE P=PONG TN=THEADED NAIL ND=NO DENT NAIL PS=PLASTIC SNAP ING SS=BLACK OXIDE SOFT SHELL S=EGULA SHELL =UST ESISTENT SH=SUPE HOOK PS=PLASTIC SNAP ING 1G=ONE GOSS BOX 5G=FIVE GOSS BOX 25G=TWENTY FIVE G.BX 50G=FIFTY GOSS BOX STYLE OF EYE COMBO TYPE OF SHELL W C M W E S S 1 G BUTTON SIZE QUANTITY TYPE OF BUTTON BACK WIE EYE 44 WITH SOFT SHELLS 44 WIE EYE WITH BLACK OXIDE SOFT SHELL 5 G. BOX (ALSO AVAILABLE IN 1 G.BOX). WCM2244WESS5G WCM2444WESS5G WCM3044WESS5G WCM3644WESS5G WCM4044WESS5G WCM4544WESS5G WCM5044WESS5G WCM6044WESS5G WIE EYE 9 WITH SOFT SHELLS 9 WIE EYE WITH BLACK OXIDE SOFT SHELL 5 G. BOX (ALSO AVAILABLE IN 1 GOSS BOX). WCM229WESS5G WCM249WESS5G WCM309WESS5G WCM369WESS5G WCM409WESS5G WCM459WESS5G WCM509WESS5G WCM609WESS5G 36

37 BUTTONS/COMBOS COMBOS PONG WITH BLACK OXIDE SOFT SHELL 5 G. BOX (ALSO AVAILABLE IN 1 G. BOX). WCM221PSS5G WCM222PSS5G WCM222PSS5G WCM242PSS5G WCM242PSS5G WCM301PSS5G WCM302PSS5G WCM302PSS5G WCM303PSS5G WCM361PSS5G WCM362PSS5G WCM362WESS5G WCM401PSS5G WCM402PSS5G WCM452PSS5G THEADED NAILS WITH SOFT SHELL 5 G. BOX (ALSO AVAILABLE IN ONE GOSS BOX). WCM2278TNSS5G WCM221TNSS5G WCM222TNSS5G WCM2478TN5G WCM3078TNSS5G WCM301TNSS5G WCM302TNSS5G WCM3678TNSS5G WCM361TNSS5G WCM362TNSS5G NO DENT NAILS WITH SOFT SHELL 5 G. BOX (ALSO AVAILABLE IN ONE GOSS BOX). WCM2234NDSS5G WCM2234NDSS5G WCM221NDSS5G WCM3034NDSS5G WCM301NDSS5G WCM301NDSS5G WCM301NDSS5G WCM3634NDSS5G WCM361NDSS5G WCM451NDSS5G PLASTIC SUPEHOOK WITH SOFT SHELLS PLASTIC SUPE HOOK WITH SOFT SHELL 5 G. BOX (ALSO AVAILABLE IN ONE GOSS BOX). WCM22SHSS5G WCM30SHSS5G WCM36SHSS5G WCM45SHSS5G PLASTIC SNAP INGS WITH SOFT SHELLS PLASTIC SNAP INGS WITH SOFT SHELL 5 GOSS BOX (ALSO AVAILABLE IN ONE GOSS BOX). WCM30PSSS5G WCM36PSSS5G SAME BUTTON SIZE AND QUANTITIES ALSO AVAILABLE WITH ALUMINUM SHELLS, EGULA SHELLS AND UST ESISTENT SHELLS. PLEASE SPECIFY TYPE AND SIZE WHEN ODEING. 37

38 TUFTING NEEDLES TUFTING NEEDLE & CLASPS CLASPS 417 & 418 THE VEY BEST. Does not catch when it is withdrawn. After thrding button, end of needle is loaded with clasps. As needle rches maximum depth, clasp is rejected. Saves time and labor. No need to remove the outside back of piece being tufted. A splendid tool to the true craftperson. Working Process: 1.- At the start assemble on the thrd the corresponding quantity of clasps for the required number of stitches. Insert clasp with thrd in the hollow of the needle. 2.- Push needle (with inserted clasps and thrd) through upholstery fabric, press hd of needle. Clasp with thrd will be ejected. 3.- Pull needle out and tighten thrd, clasp will be anchored inside. Instructions are included with the tool Overall length (inch) Each per box HEAVY-DUTY TUFTING NEEDLE 415 Here is a 6 Gauge or inch diameter tufting needle. Just the thing for those hvy-duty jobs that are a little too much for our popular 417 Tufting Needle. Furnished with complete instructions. Use clasps 418. Overall length (inch) MATTESS BUTTON TUFTE 4 Thrd button on cord, cut to length. Push needle through mattress until cord ends come through. Pull out needle. ept on all buttons. Then turn over mattress and tie. SIZE Overall length (inch) Gauge TUFTING NEEDLE AND CLASPS 6 & 6 Furniture button tufter comes with two dozen clips free. quality needle. Thrd twine in round hole in clip, hook square hole on needle and, push then withdraw needle. Directions included. CLASPS Overall length (inch) Gauge (oz ) No NEEDLE Each per bag 6 CLASPS ONLY

39 TUFTING NEEDLES NYLON TUFTING TWINE 4700 Made of superior quality white nylon. This twine has high tensile strength required for holding buttons in place. Available in three different presentations. Description End eel of 40 lbs EEL 4700-T1/2 1/2 lbs. tube T2 2 lbs. tube 783 TUBE LOOP NEEDLE 615 Loop needle with a 1/2 slot to hold pre-tied loops. Also used for hand tufting with pretied nylon loops. Available in 11 and 17. Plse specify length when ordering. S lot W eigh t ( inches ) (oz ) No. 11 1/ / T HANDLE TUFTING TOOL 408 High quality osborne tufting tool. Made of hardened steel with rubber handle. Used for pulling loops through or up. Overall length (inch) 10 1/ PONG BUTTON TUFTE 419 The 419 Prong Button Tufter accepts any length of prong 22 to 45 size of button. Tool is withdrawn after piercing fabric lving the prongs extended through the fabric. This keeps the prongs from sprding while being put through the padding. Tufter Prong Overall length (inch) 5 1/

40 CANING TOOLS CANING CHISEL 405 High quality tool. Hardened and tempered steel. Available in two sizes to fit grove size. Has a translucent plastic handle. Blade length Blade width Overall 405 1/8 4 1/ /16 4 3/ CANING NEEDLE 407 Makes wving in the strands faster and sier. Snake the needle through the strands, thrd the eye and pull needle across the frame. of eye 21 1/8 x 3/ Wving strands with the 407 Needle CANING TOOL 406 This Caning Tool can be used to move individual or multiple canes during any stage of the caning process by hooking one or both pins behind the cane and pulling it into position. This tools makes caning sier with less repetitive motion and lighter finger load. 5 1/ BASKET WEAVING TOOL WITH EYE 423 Similar to our 407 Caning needle, but shorter and with a handle for work in the more confining space of basket wving. of eye 73/4 1/8 x 3/ BASKET WEAVING TOOL 424-S Stainless steel straight blade. ound polished hardwood handle. Idl for working in water. Blade length (oz ) No. 33/ B Stainless steel bent blade. ound polished hardwood handle. Idl for working in water. Blade length (oz ) No. 31/

41 VENTILATOS/CHALKS HAND VENTILATO SETTE W idth ( inches) 3/ / /4 For setting 3/4 Ventilators. 1.- Punch 9/16 hole in material (Use 9-9/16 punch or on Vinyl, use 9 7/16 punch). 2.- Lay ventilator neck up on base, place material over ventilator, now slip ventilator ring on bow side up. A few event taps with an awhide Mallet 196 will set ventilators For setting 1 Ventilators. 1.- Punch 3/4 hole in material(use 9-3/4 punch or on Vinyl, Use 9-5/8 punch). 2.- Lay ventilator neck up on base, place material over ventilator, now slip ventilator ring on bow side up. A few event taps with an awhide Mallet 196 will set ventilators. VENTILATOS V-1 3/4 Brass Plain rim ventilators used with our 621-3/4. Packed one gross. V-1 1 Brass Plain rim ventilators used with our Packed one gross. Diameter of hole when set per gross (lbs) 3/4 9/ / VENTILATO PUNCH 622 Hardened and tempered steel. High quality. Used to punch ventilator holes illustrated in pattern. Overall (inch) Holes diametter(inch) 5 1/4 3/ MAKING CHALK 88 Clay based and thus it is much sier to erase. Other chalks that are not clay based will lve a grse on cottons and other fabrics. Also works on glass vinyl that other chalks don t. Due to the shape of this chalk a sharp marking edge is maintained. Contains: - 8 white chalks - 2 yellow chalks - 1 red chalk - 1 blue chalk

42 BONE FOLDES GENUINE BONE FOLDE, TADITIONAL 464 Highly polished genuine cattle bone folder for pasting and folding. Also for burnishing Latrone sheets, lettering, gold lf etc. Idl size for best results. 6 1/ GENUINE BONE FOLDE, STAIGHT 727A Straight rl high polished cattle bone folder for pasting and folding. Also for burnishing Latrone sheets, lettering, gold lf, etc. Available in three different sizes. (cm) & (inch) (onz) / / SYNTHETIC BONE FOLDE 465 This bone folder is similar to our 464 Bone Folder except that it is made of polished nylon. 61/ BENT BONE FOLDE 727 Bent rl high polished cattle bone folder for pasting and folding. Also for burnishing Latrone sheets, lettering, gold lf, etc. (cm) & (inch) (onz) / /

43 KNIVES AUTO TIMME S AND UPHOLSTEE S COMBINATION KNIFE 1020 Made of finest steel with both hook and pointed blade. Used for ripping sms. Cuts auto carpeting, vinyl, plastic and rubber. Beechwood handle contoured to fit hand. A handy professional tool. of blade 2 7/ SHAPENING STONE 1021 Specially contoured stone to sharpen the hook as well as the other parts of the 1020 knife. This quality stone can be used to sharpen other knives. Diammeter 6 3/ HAWKBILL KNIFE 420 This hawkbill knife is made of finest cutlery steel. Varnished hardwood handle. of blade THE SKIFE 925 Makes a remarkably sy job of skiving lther and other materials. Incrses both speed and accuracy. This essential tool is fitted with a special razor blade. Idl for restoration work. Extra blades available. ch 2 oz D 20-blade safety dispenser Bulk pack of 100 blades

44 KNIVES SQUAE POINT KNIFE 76 1/2 Trimmer s and upholsterer s knife. White handle. Steel blade. of blade Width of blade 3 7/8 5/ SQUAE POINT KNIFE - With safety guard 77 Same as 76 1/2, but furnished with steel safety guard. of blade Width of blade 3 7/8 5/ SHAP POINT KNIFE 79 1/2 White hardwood handle, sharp point knife. A popular knife in the upholstery and trimming business. Steel blade. of blade Width of blade 3 3/4 3/ BEVEL POINT SKIVING KNIFE 479 Used for skiving and edge trimming on lther and similar materials. Plated ferrule. Lacquered hardwood handle. of blade SHEATH - For knives 72 A sturdy lther shth for our industrial knives. Slits fit on belt. Stitched edges reinforced with six rivets. overall of pocket Width /

45 AWLS HEAVY DUTY SCATCH AWL 4 Made in four sizes for your convenience. Best quality steel blades with rugged amber translucent plastic handles. Blade length 1 2 1/ / / / SCATCH AWL 478 Sharp pointed. Tempered blade for piercing lther, sewing and a variety of uses. Hardwood handle. Blade length 2 3 7/ SCATCH AWL 911-P Sharp round pointed. Plastic handle. Hardened steel blade. round point Blade length (inch) & (mm) square point BADMINTON AWL 4 & PK Same as above but with square point T-10 Sharp point. Hardwood handle. Blade length 1 1/ TENNIS AWL T-11 Blunt point prevents scratching the lther when aligning, etc. Hardwood handle. Blade length 2 1/2 6 1/ ALL PUPOSE AWL 18 The bent awl is a varied-purpose tool. Grt for hard to rch places in upholstery work. Can be used to remove small staples in grooves. Tempered end. Blade length 5 1/2 9 1/ 2 4 1/

46 AWLS AUTOMATIC AWL 4 An excellent tool for sewing lther, canvas and similar materials. The awl carries a spool of waxed polyester black thrd on the handle. Hollow handle holds extra curved needle and wrench. Directions furnished with ch awl explaining how automatic awl lock stitch can be effected in repair work. Furnished with one straight ( 4N 8) and one curved diamond point ( 4N 6) needle. Description 4 Automatic awl eplacement parts Description 4LT 1 lb. tube of thrd 740 yards 4 reel of thrd ½ yards 4ST 1/4 lb. tube of thrd 185 yards 4N 5 Short straight needle N 6 Curved needle N 8 Coarse straight needle N 8C # 8 Curved needle B eels of black thrd B eels of brown thrd W eels of white thrd ST B Black thrd 1/4 lb. tube 162 4ST B Brown thrd 1/4 lb. tube 164 4ST W White thrd 1/4 lb. tube 166 4LT B Black thrd 1 lb. tube LT B Brown thrd 1 lb. tube LT W White thrd 1 lb. tube TUCKING TOOL 747 IGID For tucking hdlining and upholstery around windows and above doors and other hard to rch places. A sturdy tough tool with a slightly curved blade that has finished edges and rounded corners. Comfortable wood handle with eyelet hole through one end. of blade 2-5/8 7-1/ FLEXIBLE Same as above but with flesible spring steel blade. A very popular tool

47 AWLS HAFTS/ AWLS PALM AWL HAFT 2 Designed to fit in the pal of your hand. Comes with chuck and wrench. Holds all awls shown below. Weighs 1-1/2 ounces PEG AWL HAFT 3 A widely used type of awl haft. Comes with chuck and wrench to permit sy changing of blades. Lther tipped to prevent splintering when hammered. Holds all awls shown below. Weighs 2 ounces SHOE AWL HAFT 4 Clr lacquer finish, brass ferrule. Holds awls 43, 44, 32 and needle when they are forced into wood. Plse specify when ordering, with awl inserted or by itself. Weighs one ounce SEWING AWL HAFT 5 A popular sewing awl haft. Widely used by shoemakers. Knobbed end permits sy grasp and prevents slipping. Also made for wrapping thrd. Made of hard maple. Varnished. Comes with chuck and wrench. Holds all awls shown below. Weighs two ounces CUVED SEWING AWLS 31 Finest quality. Side view Top view 2 1/ / STABBING AWLS, OUND POINT 32 Finest and toughest steel. 2 1/ SADDLES' HANESS AWL (43-52) SADDLES' STITCHING AWL (54-59) (42) Finest quality. Special thin sizes /2 1 3/ / 4 2 1/ 2 2 5/ 8 2 3/ 4 2 7/ / Finest quality.hand grounded / 4 2 1/ 2 2 3/

48 HOG ING PLIES HOG ING PLIES WITH VINYL HANDLES 40 Nine different styles with straight or angled handles, comes with opening springs, closing springs and no springs. Plse specify style. Grooves are the proper depth. Made of forged steel and vinyl handles. Each one weighs eight ounces. Works with hog rings 42 and 43. Plse specify style when ordering. 40-A Straight handles 6-3/4" long 40-B Handles bent at 5 degrees angle to jaw 40-C Handles bent to rch difficult spots (Jaws and handles are aligned) T ype 40-A No spring B No spring C No spring AO Opening spring AC Opening spring CO Opening spring AC Closing spring 546 OPENING SPING 40-BC Closing spring CC Closing spring 548 Springs only also available eplacement Springs 40-SC Closing spring SO Opening spring NO SPING CLOSING SPING 48

49 HOG INGS PLIES 23S-M Joint held by rivet. Handles have been redesigned to fit the palm of the hand. HOG ING PLIES WITH BOW HANDLES Same as our popular 40 s but with open space between the handles. Made of durable, hot forged and empered steel, Improved Hog ing Grooves.Different styles available. is 7-1/4 inches. D escriptio n (onz ) STAIGHT TYPE 23-M Hog ring pliers without sprin g P-M 23P-M Hog ring pliers with closing sprin g S-M Hog ring pliers with opening sprin g BENT TYPE 23-M 2350-M Hog ring pliers without sprin g TP-M Hog ring pliers closing sprin g TS-M Hog ring pliers with opening sprin g TS-M STAIGHT TYPE 23T-M Hog ring pliers without sprin g TP-M Hog ring pliers closing sprin g One handle isbent slightly for a comfortable fit the crook of the thumb. Joint held by a rivet. 23TS-M Hog ring pliers with opening sprin g BENT TYPE 2360T-M Hog ring pliers without sprin g TP-M Hog ring pliers closing sprin g TP-M 2360TS-M Hog ring pliers with opening sprin g Springs-only, also available separately 2350-M 2360TS-M 23TS-M Tension type hog ring pliers. The joint is held by a bolt, nut and tension washer; this keeps the joint from freezing and helps hold the hog ring when pliers is laid down. 2360TP-M 23TP-M 2360T-M 23T-M Tension type hog ring pliers. The joint is held by a bolt, nut and tension washer. This keeps the joint from freezing and helps hold the hog ring when plier is laid down. 49

50 HOG INGS HOG INGS SHAP POINTS 42 To be used with 40, 23, 23T, 2350N Hog ing Pliers. Polished. 3/4 rings. OPEN Description Quantity per (aprox.) box lbs/box lbs/box CLOSED 44SS-5 Same as above but Stainless Steel Box of 5 lbs. available. Sharp points. HOG INGS BLUNT POINTS OPEN 43 To be used with 40, 23, 23T, 2350N Hog ing Pliers. Polished. 3/4 rings. Descriptio n Quantity per (aprox.) box CLOSED lbs/box lbs/box HOG ING PLIES 773-HP Hardened and tempered. Forged steel. Vinyl handles. Works with our new 773-K millimeter hog rings. Idl for closing around a smaller ar. Can be used on bungie cord. (mm) & 180mm - 7 1/ HOG INGS 773-K To be used with our 773-HP Hog ing Pliers. Available in 5/8 with blunt and sharp points, and 7/8 with sharp points only. Specify when ordering. Descriptio n Quantity per box 773-KB 20 5/8" Blunt hog rings KS 20 5/8" Sharp hog rings K 25 7/8" Sharp hog rings

51 AUTO TIM TOOLS HEADEST ELEASE KEY SET K-752 Set of 4 Hdrest else Keys 752 s. Perfect for auto trim work. 1 ch of following sizes 752 Hdrest relse keys. per set (lbs) K-752 s 1/4 3/ 8 1/ 2 5/ 8 4 1/ DOO HANDLE CLIP EMOVE 758 High quality. Perfect for auto trim work. Plated. An industry standard MOULDING ELEASE KEY 757 High quality. Perfect for auto trim work. Plated. An industry standard TIM PAD EMOVE 760 High quality. Perfect for auto trim work. Plated. An industry standard. 8-1/ AUTO WINDSHIELD KNIFE 801 Unique double blade action helps cut out urethane around windshields. Plastic amber handle. Width (onzes) 801-L 5-1/ 2 3/

52 GLUE STICKS/OLLES GLUE STICKS 2000 Hot melt adhesive for use with glue gun. Idl for Upholstery and restoration work. 1/2" diameter by 10" long. Each one weighs 4 ounces. Packed sticks to a box GLUE STICKS - BULK 2003 Same type of glue sticks as above bulk packed 22 lbs. per box. Each box contains approximately 375 glue sticks. Box msures 22 x 11 x 4. Weighs 22 lbs NEEDLE NOSE LACING PLIES 103 1/2 Lacing pliers, forged steel. Single joint, polished jaws, black handle. Slightly serrated jaw. VINYL OOF, CAPET AND VENEE OLLE Used to roll on vinyl roofs, gets all the air pockets out and used on interior carpeting to smooth it out. This tool can also be used for Veneer work in furniture. Available in 2 sizes. ound edge, single side design to get close to walls. Ball bring race. Available in two handle sizes. S ize (lbs) 399-S 9-1/ 2 2-1/ L 2-1/ SQUAE EDGE SEAM OLLE 499 Same as above ex except squared on both sides. Used to roll on linoleum sm work, asphalt tile, and coving work. Available in two handle sizes. 2 S ize (lbs) 499-S 9-1/ 2 2-1/ L 2-1/

53 EGONOMIC SHEAS BENT TIMMES 2022 Premium hvy duty shr with black cushion grip handles designed to cut multiple layers of fabric simultaneously. EGO-CUT Hardened for long life. The edges come standard with a knife edge for sier fabric cutting action. Pivot is a wave washer supported power lock screw that will not loosen during service. Corrosion resistant chrome over nickel plated industrial finish. Slices sily through carpet, canvas, rubber and multi-layers of material. Enlarged Lower ing for Added Comfort. Overall of cut ch (onzes) No / EGO DESIGNED SHEAS 2020 Premium large ring industrial quality bent trimmer. The ring is designed to fit a complete hand thus allowing the hand to function in a normal manner. The ring is soft coated with EGO-CUT black coating for added comfort. Knife edge for sier fabric cutting action. Pivot is a wave washer supported power lock screw that will not loosen during service. Corrosion resistant chrome over nickel plated polish finish. Idl for cutting synthetics fibers. Enlarged Lower ing for Added Comfort. Overall of cut ch (onzes) / EGO DESIGNED SHEAS 2021 High leverage shrs that comes with a large soft coated EGO-CUT black ring to fit additional fingers for added cutting force. The tool is standard with a knife edge and serrated blade for gripping lther. Hardened for extra long life. Corrosion resistant chrome over nickel plated polish finish. Pivot is standard with non loosening power lock screw supported by spring steel split washer. Enlarged Lower ing for Added Comfort. Overall of cut ch (onzes) 9 4-3/ MULTI-PUPOSE SHEAS 2023 Large ring soft handled ergonomic bent trimmer. Less strain EGO-CUT on wrist and hand. The tool has stainless stamped blades with a hvy blade cross section, reinforced pivot, and compound cutting edge for low cutting force when cutting fabrics. Hardened for extra long life. Excellent for glove use on wet applications. May be used right or left hand. Blue handles. Overall of cut ch (onzes) Enlarged Lower ing for Added Comfort /

54 SHEAS WISS BENT TIMME SHEA 20-S and 22 High quality. Each blade forged of one piece.inlaid blades. Black handles. Polished blades. A very popular shr for upholstery work. Overall of cut (onzes) 20-S / / WISS BENT TIMME SHEA 27, 28 and 29-S High quality. Each blade forged of one piece.inlaid blades. Black handles. Nickel plated blades. Similar to above shrs but shorter in length and cut. Also lighter. Overall of L engt h cut ( onzes ) No. (inches ) / / S WISS BENT TIMME SHEA (Left Hand) 2OLH High quality. Each blade forged of one piece.inlaid blades. Black handles. Nickel plated blades. The perfect shrs for the left hand upholsterer. Overall L engt h (inches ) of cut ( onzes ) No / WISS BENT TIMME SHEA (Knife Edged) 25 and 26 High quality. Each blade forged of one piece.inlaid blades. Black handles. Polished & nickel plated blades. Patented set-sy pivot. Similar to the 20-S and 22 but hvier. Overall L engt h (inches ) of cut ( onzes ) No / / WISS UPHOLSTEY & CAPET SHEA (raised blade) 20W and 22W High quality. Each blade forged of one piece. Inlaid blades. Black handles. Polished blades. Patined set-sy pivot. Idl for carpet work. It has a raised blade. Overall L engt h (inches ) of cut ( onzes ) No. 20W / W 6-1/

55 SHEAS WISS STAIGHT TIMMES 30, 36-S and 38-S High quality. Each blade forged of one piece.inlaid blades. Black handles. Polished blades. Overall 30 0 of cut (onzes) 1 4-7/ / / WISS PINKING SHEAS AA Hot drop-forged, professional industrial model, extra large teeth. Nickel plated blades. Black handles. Overall of cut (onzes) 10-5/8 3-7/ WISS PINKING SHEAS CB-9 Hot drop-forged, professional industrial model, extra large teeth. Nickel plated blades. Black handles. Less length and length of cut that above shrs. Overall L engt h (inches ) of cut ( onzes ) No / WISS AUTO BODY SHEAS 1-DS Hot drop-forged. Inlaid blades. Nickel plated blades. Overall L engt h (inches ) of cut ( onzes ) No WISS UG SHEAS S-1 Hot drop-forged. Double sharp points. Black offset handles solid steel. Overall of cut (onzes) 7-1/2 2-7/ WISS AUTO DUTY UTILITY SHEAS 2-DA Florist and dental shrs. Solid steel. Hot drop-forged. Serrated. Nickel plated blades.black handles. Overall of cut ( onzes) 8 2-1/

56 SHEAS OSBONE E-Z CUT LEATHE SHEAS 708 At last a shr that cuts soft lther up to 8-oz. as sily as butter. Try them- compare them- you will be amazed. Knifeedge, ultra sharp blades are chromed-plated, blunt points. of cut (oz ) No. 81/ WISS LEATHE O BELT SHEAS 8BLT Specially designed for cutting hvy lther or tough materials. One blade serrated to prevent slipping. Hvy construction, powerful leverage. Straight handles, enameled black. Polished blades. of cut (oz ) No. 85/8 31/ WISS QUICK-CLIP SPEED CUTTES 1570-QC Stainless steel replacble blades. Positive spring action reopens blades for fast cutting. Hvy duty contour designed frames. Idl for thrd cutting, sm ripping, garment finishing, flower spring, etc. With sharp points. eplacement blades part 1570-K Overall of cut (onzes) 4-3/4 1-1/ WISS THEAD CLIPS TC-1 Idl for clipping thrds, strings and ripping sms. Positive action, self-opening spring provides fast, cln cutting. Hot drop-forged of fine cutlery steel. egular edge. Sharp points. Nickel plated. Comes with a red plastic safety protection to prevent damage in the points. Overall of cut (onzes) 4-5/ / WISS THEAD CLIPS TC-5 Similar to above Thrd Clips 1570-QC but it has blunt points to prevent damage on the thrd. Overall L engt h (inches ) of cut ( onzes ) No. 4-5/ /

57 SNIPS WISS METAL MASTE SNIPS Compound action snips cut with half the effort required with standard types. They may be used on all metals for which any other hand snips are suitable. Colorful vinyl grips which prevent slipping and offer positive model identification. M1 M2 M3 M5 M6 M7 M300 ( Cuts Left ) ( Cuts ight ) ( Cuts Comb. and Straight ) ( Bulldog Comb. ) ( Cuts ight) ( Cuts igth) ( Cuts long Comb. ) Color Grips Overall of cut (onzes) M1 M2 M3 M5 M6 M7 M300 e d 9-3/ 4 1-3/ Gree n 9-3/ 4 1-3/ Yello w 9-3/ 4 1-1/ e d 9-1/ 4 7/ e d 9-1/ 4 7/ e d 9-1/ 4 7/ Yello w 9-1/ 4 7/ WISS STAIGHT BLADES METAL SNIPS J-7S Hot drop-forged and fully nickel plate d with black enameled handles. Used for Electronic, Aircraft and Missile mfg., and by Jewelers and Dental Technicians. Overall L engt h (inches ) of cut ( onzes ) No /

58 SOLID PUNCHES The punches below are forge from the finest quality high carbon steel. Hardened and tempered points for industrial use. Pointed ends are highly polished. Hexagon shanks in black industrial finish. CENTE PUNCHES 353 Hex stock size 1/4 41/ /8 41/ / /8 61/ PICK PUNCHES Hex stock size 354 (oz ) No. 1/4 41/ /16 41/ / / /8 61/ SOLID PUNCHES Point diameter Hex stock size 355 1/8 5/16 4 1/ /4 5/ 8 6 1/ /16 3/ /16 3/ /8 7/ PIN PUNCHES Point diameter Hex stock size 357 (oz ) No. 3/32 1/ 4 4-1/ /8 3/ /32 3/ /16 x 3/8 3/ /32 3/ /16 x 1/2 1/ /4 1/ /16 1/ ALIGNING PUNCHES Point diameter Hex stock size 359 (lbs) 1/4 1/ /16 5/ /16 3/ /8 7/

59 MALLETS CUTTING PAD 603 Made of a special formula resilient vinyl plastic, these tough cutting pads are idl for use with Punches. They are long wring and can be used on both sides. Cutting pads should be used on a solid base for best results. Other sizes quoted upon application. (lbs) 10 x 10 x 1/ SPLIT HEAD HAMME 395 Idl for use with punches, grommet dies and wherever a cushioned blow is desired. No trouble to replace faces. Just loosen the safety nut, remove the worn face, insert replacement and tighten. Long wring. awhide, nylon, urethane and copper faces available. awhide faces supplied if none is specified. Description pair (lbs) Diameter of face of hd Sz. 1 - awhide / 4 3 5/ Sz. 2 - awhide 2-1 1/ 2 4 1/ Sz. 3 - awhide / 4 4 7/ N Sz. 1 - Nylon / 4 3 5/ N Sz. 2 - Nylon 2-1 1/ 2 4 1/ N Sz. 3 - Nylon / 4 4 7/ U Sz. 1 - Urethane / 4 3 5/ U Sz. 2 - Urethane 2-1 1/ 2 4 1/ U Sz. 3 - Urethane / 4 4 7/ C Sz. 1 - Copper 2-1 1/ 4 3 5/ F-(size) awhide 395F-(size)N Nylon 395F-(size)U Urethane 395F-(size)C Copper 395-2C Sz. 2 - Copper / 2 4 1/ C Sz. 3 - Copper / 4 4 7/ EPLACEMENT FACES 395F F F-2N F-1U F-3U F-2C F F-1N F-3N F-2U F-1C F-3C 111 AWHIDE MALLET - with solid hd 196 The hd of this lightweight mallet is made entirely of rolled water buffalo rawhide. Handle is white hickory. It is recommended for many jobs where the user wishes to avoid scarring. of hd Diameter of face of handle(in) ch 0 2 3/ / 8 1 1/ / 4 1 1/ 2 9 1/ / 8 1 3/ / / / / / / 2 2 3/ /

60 MALLETS BAEL SHAPED HICKOY MALLET 89.5 Made of hickory, a carefully finished, well balanced, hvy mallet. Lacquered. S ize No. Diameter of face Diameter of hd of handle (oz ) No. 21/2 23/ 8 51/ / / 4 51/ / /2 2 51/ / / / HICKOY MALLET 90 A servicble and sturdy mallet, widely used for a variety of purposes. All hickory, lacquered. S ize No. Diameter of face Diameter of hd of handle (oz ) No. 2 23/ 4 51/ / / 2 51/ / / / BLACK UBBE MALLET 197 ubber mallets can be used without fr of marring metal parts. Limited bounce. Hd of solid dense black rubber with white hardwood handle. S ize No. Diameter of face of hd (oz ) No / / 2 41/ WHITE UBBE MALLET extra hvy white rubber mallet will not mar surface. Superior quality. Finest on the market. Limited bounce. White hardwood handle. Handles only are also sold separately. S ize No. Diameter of face of hd (oz ) No / / 2 41/

61 ACH PUNCHES These punches should be used on a wood or plastic cutting block or the #603 Cutting pad. The use of a wooden or rawhide mallet is recommended. Steel hammers are not recommended. ACH PUNCH - Original and correctly designed for cutting 9 arch punches are drop forged in one piece from the finest special carbon steel in sizes from 3/16". Larger sizes are made with our properly engineered two piece welded construction. A unique fture of the arch punch is the inside taper which permits the punching to clr sily through the barrel. Punches have fully polished barrel and black enamel handle. The cutting edge is fully hardened all the way through and properly Meets Government Standards finished to provide long use trouble free punching. There is no other Hollow Punch that can compare. Stock sizes shown below in inches with black enamel finish. Diameter (lbs) Diameter (lbs) Diameter (lbs) Diameter (lbs) Diameter (lbs) 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Stock sizes shown below in millimeters with green enamel finish. Diameter (mm) (lbs) Diameter (mm) (lbs) Diameter (mm) (lbs) Diameter (mm) (lbs) Diameter (mm) (lbs)

62 PUNCH SETS These punches should be used on a wood or plastic cutting block or the #603 Cutting pad. The use of a wooden or rawhide mallet is recommended. Steel hammers are not recommended. ACH PUNCH SETS K- This set of seven arch punches includes the sizes most widely used. They are put up in a sturdy, sy to use canvas tool roll as shown. 1 ch of following sizes 9 - Arch Punch: per set (lbs) K- s 1/4 3/ 8 1/ 2 5/ 8 3/ 4 7/ K-MM This set of seven arch punches includes the most popular millimeter sizes. They are put up in a sturdy, sy to use canvas tool roll as shown. 1 ch of following sizes 9 - Arch Punch: K-MM s (mm) per set (lbs) / K-16 This set of seven arch punches of sixteenth sizes are incremented by 1/8" starting with 3/16". They are put up in a sturdy, sy to use canvas tool roll as shown. 1 ch of following sizes 9 - Arch Punch: per set (lbs) K-16 s 3/16 5/16 7/16 9/16 11/16 /16 15/ ACH PUNCH & TOOL SET K-17 Set of seven popular tools in a sturdy canvas tool roll. 1 ch of the following items: Description per set (lbs) 9 1/4 Arch punch 9 3/8 Arch punch 9 1/2 Arch punch 9 5/8 Arch punch /4 Arch punch 4-1 2½" Scratch awl V- 7" Snips BELT PUNCH SET K-245 Kit contains the most frequently used sizes. 1 ch of following sizes Belt Punches s Diameter per set 1/8 5/32 3/16 1/ 4 5/16 3/

63 PUNCH SETS These punches should be used on a wood or plastic cutting block or the #603 Cutting pad. The use of a wooden or rawhide mallet is recommended. Steel hammers are not recommended. MINI-PUNCH SET K-157 A special punch set for cutting small, precise holes in soft materials where throated or plier punches won't rch. Set has a round handle with slot inside to clr punching. Handle is thrded to accommodate the seven replacble screw tubes sizes which are shown below. See page 4 at bottom for actual sizes of cutting tubes. Set consists of seven tubes and handle. Tube size per set Tube size 5/64 3/32 7/64 1/ 8 5/32 11/64 3/ SELF-CENTEING PUNCH SET K-156 This handy and versatile kit contains thrded handle with self-centering pointed plunger. The thrded handle will accommodate nine interchangble thrded cutting tubes. The punches in this set will clnly cut lther, rubber, paper, plastics and other soft materials. The self-centering point makes these punches idl for cutting concentric washers in small quantities by hand. s of punches listed below. All cutting edges properly hardened. The only professional tool like it. Comes in a sturdy plastic box for storage. Tube sizes per set (lbs) 1/4 5/16 3/ 8 7/16 1/ 2 5/ 8 3/ 4 7/ / EPLACEMENT PATS K156-H K-156T 1/4 K-156T 5/16 K-156T 3/8 K-156T 7/16 Extra handl e K-156T 1/ 2 Extra tub e K-156T 5/ 8 Extra tub e K-156T 3/ 4 Extra tub e K-156T-7/ 8 Extra tub e K-156T 1 Extra tub e Extra tub e Extra tub e Extra tub e Extra tub e SELF-CENTEING PUNCH SET K-159 Similar punch set as above item, but in larger sizes. Tube sizes per set (lbs) 1-1/8 1-1/ 4 1-3/ 8 1-1/

64 PUNCHES EVOLVING PUNCH - for professional and industrial use 155 Six tube punch made with tubes 1, 2, 3, 4, 5, 6 or 0, 1, 2, 3, 5 & 7. This punch is known as the best evolving Punch made. The frame is made of forged steel, highly polished. Cutting tubes are turned from special carbon tool steel and thrded to allow sy replacement. These tubes are individually hardened. The rch or distance from the cutting tube to the back of jaw is 1 1/2". ch is oz. 0 to 7 provided unless specified otherwise. D escriptio n No. Note: Numbers 155, 153 and 223 tubes are not interchangble. 155 punch take tubes up to size 6 and 7 only as indicated on the cylinder of the punch. Punch tubes msure 3/4" overall. OUND O DIVE PUNCH - ound Shank Diameter evolving punc h evolving punc h A Extra anvi l HS Extra handle sprin g SP Extra side sprin g T-(size) Extra tube s See belo w 155T 0-7 Set of replacement tube s T 1-6 Set of replacement tube s EVOLVING PUNCH - Nickel plated 223 A fine quality pressed frame revolving punch with drive tubes. All tubes are ht trted to give long wr. Furnished with tubes sizes: 0 (5/64"), 1 (3/32"), 2 (7/64"), 3 (1/8"), 4 (5/32") & 6 (3/16"). Packaged on hang up blister packed board 11" x 4". Weighs 6 ounces. : 8-1/ Drop forged from finest special carbon steel, carefully hardened, with polished barrel. The hole tapers back from the cutting edge so that the punching clr freely and require only a light blow with a mallet to cut with se Diameter Siz e 5/6 4 7/6 4 1/ 8 9/6 4 5/3 2 11/6 4 3/1 6 7/3 2 1/ 4 9/3 2 5/1 6 3/ 8 /3 2 7/1 6 15/3 2 33/6 4 9/1 6 (oz ) BELT PUNCH - ound shank 245 Hardened cutting edge - milled clring hole. Polished barrel. Widely used in the furniture industry. Also available in millimeters sizes 2 to 20 mm Diameter 1/16 5/6 4 3/3 2 7/6 4 1/ 8 5/3 2 11/6 4 3/1 6 /6 4 1/16 5/6 4 3/3 2 1/ 8 9/6 4 5/3 2 11/6 4 3/1 6 /6 4 7/3 2 1/ 4 17/6 4 9/3 2 5/1 6 11/3 2 3/ 8 /3 2 7/1 6 1/2 9/16 5/ OBLONG CUTTING PUNCH 400 Polished barrel with hardened cutting edge. Hole tapers inside for sy punching clrings. Properly welded. S ize 1 11/16 x 3/ /8 x 1/

65 GOMMET / DIES grommet inserting dies and grommet hole cutters are numbered to correspond with standard size grommets. The dies are guaranteed to set the proper size and style grommets. Grommet dies and cutters should be used with a rawhide hammer or wooden mallet, not with a steel hammer. We recommend our #395 rawhide hammers for this purpose. GOMMET INSETING DIES 216 Sets plain rim washers and grommets. s 00 through 5 are made from high grade tool steel, while size 6 and up are mallble iron casting. Properly machined and hardened. The finest industrial grommet die made. For best results use only grommets and washers. 217 Sets spur washers and grommets. s 0 through 5 are made from high grade tool steel while sizes 6, 7 & 8 are mallble iron castings. Made to U.S. Government specifications. S ize No. c h (lbs) No. S ize No. c h (lbs) No S ize No. c h (lbs) No. S ize No. c h (lbs) No BASS PLAIN IM GOMMETS AND WASHES BASS OLLED IM GOMMETS AND SPU WASHES G1 For best results in setting G1 grommets and washers use an 500 hole punch and an 216 setting die with corresponding sizes. Diameter of hole when set per gross (lbs) 00 3/ / / / / / / / N1 Same specification as above except NICKEL PLATED G2 For best results in setting G2 spur washers and grommets use an 500 hole punch and an 217 setting die. S ize Diameter of hol e per gross No. when set (lbs) No. 0 1/ / / / / / / / / N2 Same specification as above except NICKEL PLATED GOMMET HOLE CUTTE 500 Hole cutter Hole size Hole cutter Hole size 00A 3/ A 1/ A 1/ A 5/ A 9/ A 3/ A 3/ A 7/ A 7/ A Drop forged, hardened and polished edge. Inside tapered for sy clrance. Use with corresponding grommets and setting dies. 65

66 GOMMET / DIES MIDGET GOMMET DIE 235 For setting plain rim washers and grommets. This die is designed for use where only a few grommets are to be inserted. S ize No. W eigh t (lbs ) No. S ize No. W eigh t (lbs ) No / / / GOMMETS G1S Packed 2 dozen brass plain rim grommets and plain washers in a hang up bag. efills for K234. Cards and baggies msure approximately 4" x 5 1/2". S ize No. W eigh t (oz ) No. S ize No. W eigh t (oz ) No / / / N1S Packed 2 dozen nickel plain rim grommets and plain washers in a hang up bag. efills for K234. Cards and baggies msure approximately 4" x 5 1/2" / / / GOMMET KIT K Kit includes 257 Grommet Setting Pliers, 245 Hole Punch and gross of G1-00 Grommets and Washers. Diameter of hole when set 3/16". Card msures: 11" x 4". (oz ) No

67 GOMMET / DIES SET-IT YOUSELF GOMMET KIT K-234 Hang up card in an sy to use display box. Complete instructions on back of ch card. For Do-It-Yourself Home epair. Kit has grommet die, punch, cutting board and grommets. s zero and one, four dozen of grommets; sizes two, three and four have two dozen of grommets. Cards msure 10-1/2 x 5. S ize No. W eigh t (oz ) Grommet s in. No. 0 oz. 4doze n oz. 4doze n oz. 2doze n oz. 2doze n oz. 2doze n 32 8 HOME GOMMET INETING KIT K235 A complete and inexpensive kit for consumer use. Each kit consists of a 235 grommet die, a 245 cutting punch, three dozen brass plain rim grommets and washers, a small cutting board and complete instructions. Packed in a caseboard box. S ize No. Diameter of grommets per kit (lbs) No. 0 1/ 4 11/ /3 2 11/ / 8 / /1 6 / / 2 /

68 IVETS.SETTING TOOLS IVETS / SETTES 1700 Copper rivets and burrs. Use with Nos. 169 & 170. Packed 1 lb. per box. 170 Choose the setter with a hole diameter slightly larger than the rivet being set. s for #170 correspond with popular 8, 9 and 10 copper rivets. For other size rivets, use table below to determine proper size of #169 ivet Setter. Push the rivet through the hole then turn the material over. Place burr on rivet, then use the rivet setting tool's straight hole to drive the burr down tight against the material. Cut the rivet off close to the burr with side or end nippers. Do not cut off flush with the burr, but lve about 1/16 of an inch above the burr. The hole on the side of the rivet setter can be used to dislodge any waste that is wedged into the tool. Place the concave recess of setter on the burr. Hold perpendicular and strike the tool forcefully, turning to the left then right as you strike. This sprds the end of the rivet over the burr, simultaneously rounding its end. A few extra blows from the soft faced mallet can be used to flatten the rivet end a bit, if desired. or Number Diameter under hd (in) overall (in) Number of rivets & burrs per lb /4 3/ 4 3/ 4 3/ 4 3/ 4 3/ 4 3/ 4 3/ Drop forged, polished face. O sborne No. H ole Dia. Coppe r ive t ive t Shank Dia. (oz ) No Polished face, black finish, forged steel. Hardened working end. Hole Dia. Copper ivet ivet Shank Dia. Hole Dia. Copper ivet ivet Shank Dia. Tool to be used IVET SETTE 443 For use with loose lf binders. 4. Shank diamter is 3/8. Weighs 2 ounces IVET SETTE 168 ivet setter with concave end and knurled handle. Shank diameter (oz ) No. EYELET SETTE /8 3/ & Sprds eyelets so that they can be flattened with a mallet or rawhide hammer. Knurled handle prevents slipping. Nickel plated. Shank diameter / 8 5/ / 8 1/ IVET SETTE Enables eyelts to be set in a paper card without preparation. Pierces material and sets 5/32 and 7/32 in a single preparation. Plse specify size when ordering. Weighs 7 ounces.

69 SNAPS SETTES/KIT SNAP SET KIT K (Baby Snaps) K (Standard Snaps) Includes parts to complete six 5/8" standard nickel plated brass snaps or 1/2" baby snaps along with flaring tool and die. Comes with instructions on back of hang up card 4 3/4" x 5-3/4". K K SNAP SETTE - With snaps K-230 An sy to use hand snap set. Snaps are nickel plated brass. Set comes with 25 complete standard 5/8" size 24 snaps, flaring tool and two dies (concave and stud). K SNAP SETTE ONLY 230-SET Settter only, no snaps included 230-SET DUABLE SNAP SETTE Setting die for #20 Baby Dot snaps Setting die for #24 Standard snaps. Comes with flaring tool and a double-sided die

70 SNAPS FASTENES SNAPS FASTENES Available in Brass and Steel with three finishes: Nickel, Cooper Black and Shiny Brass. Interchangble with durable fasteners. To be set without snaps dies. We have two sizes of snaps which are: # 20 = 1/2 Baby Snap and # 24 = 5/8 Standard Snap. DESCIPTIONS: C = 100 PIECES PE BOX M = 1000 PIECES PE BOX CAP SOCKET STUD EYELET OSBONE K C K M K C K M K C K M K C K M K C K M K C K M K C K M K C K M K C K M K C K M K C K M K C K M KITS ( 4 PCS.) DESCIPTION # 20 BASS 4-PC. SNAPS/NICKEL100/P K 20 0 # 20 BASS 4-PC. SNAPS/NICKEL1000/P K 20 2 # 20 BASS 4-PC. SNAPS/COPPE BLACK 100/P K 20 4 # 20 BASS 4-PC. SNAPS/COPPE BLACK1000/P K 20 6 # 20 BASS 4-PC. SNAPS/ SHINY BASS 100/P K 20 8 # 20 BASS 4-PC. SNAPS/SHINY BASS 1000/P K 21 0 # 20 STEEL 4-PC. SNAPS/NICKEL 100/P K 21 2 # 20 STEEL 4-PC. SNAPS/NICKEL 1000/P K 21 4 # 20 STEEL 4-PC. SNAPS/COPE BLACK 100/P K 21 6 # 20 STEEL 4-PC. SNAPS/COPPE BLACK 1000/P K 21 8 # 20 STEEL 4-PC. SNAPS/SHINY BASS 100/P K 22 0 # 20 STEEL 4-PC. SNAPS/SHINY BASS 1000/P K 22 2 # 24 BASS 4-PC. SNAPS/NICKEL 100/P K 23 5 # 24 BASS 4-PC. SNAPS/NICKEL 1000/P K 23 7 # 24 BASS 4-PC. COPPE BLACK 100/P K 23 8 # 24 BASS 4-PC. COPPE BLACK1000/P K 23 9 # 24 BASS 4-PC. SHINY BASS 100/P K 24 0 # 24 BASS 4-PC. SHINY BASS 1000/P K 24 1 # 24 STEEL 4-PC. SNAPS/NICKEL 100/P K 24 5 # 24 STEEL 4-PC. SNAPS/NICKEL 1000/P K 24 7 # 24 STEEL 4-PC. COPPE BLACK 100/P K 24 8 # 24 STEEL 4-PC. COPPE BLACK 1000/P K 24 9 # 24 STEEL 4-PC. SHINY BASS100/P K 25 0 # 24 STEEL 4-PC. SHINY BASS 1000/P K 25 1 OSBONE INDIVIDUAL DESCIPTION 2708-C # 20 Brass Eyelet/Nickel C/P K M # 20 Brass Eyelet/Nickel M/P K C # 20 Brass Cap/Nickel C/P K M # 20 Brass Cap/Nickel M/P K C # 20 Brass Socket/Nickel C/P K M # 20 Brass Socket/Nickel M/P K C # 20 Brass Stud/Nickel C/P K M # 20 Brass Stud/Nickel M/P K C # 20 Brass Eyelet/Copper Black C/P K M # 20 Brass Eyelet/Copper Black M/P K C # 20 Brass Cap/Copper Black C/P K M # 20 Brass Cap/Copper Black M/P K C # 20 Socket/Copper Black C/P K M # 20 Socket/Copper Black M/P K C # 20 Brass Stud/Copper Black C/P K M # 20 Brass Stud/Copper Black M/P K C # 20 Brass Eyelet/Shiny Brass C/P K M # 20 Brass Eyelet/Shiny Brass M/P K C # 20 Brass Cap/Shiny Brass C/P K M # 20 Brass Cap/Shiny Brass M/P K C # 20 Brass Socket/Shiny Brass C/P K M # 20 Brass Socket/Shiny Brass M/P K C # 20 Steel Eyelet/Nickel C/P K M # 20 Steel Eyelet/Nickel M/P K C # 20 Steel Cap/Nickel C/P K

71 SNAPS FASTENES SNAPS FASTENES DESCIPTIONS: C = 100 PIECES PE BOX M = 1000 PIECES PE BOX OSBONE DESCIPTION 3709-M # 20 Steel Cap/Nickel M/P K C # 20 Steel Socket/Nickel C/P K M # 20 Steel Socket/Nickel M/P K C # 20 Steel Stud/Nickel C/P K M # 20 Steel Stud/Nickel M/P K C # 20 Steel Eyelet/Cooper Black C/P K M # 20 Steel Eyelet/Cooper Black M/P K C # 20 Steel Cap/Copper Black C/P K M # 20 Steel Cap/Copper Black M/P K C # 20 Steel Socket/Copper Black C/P K M # 20 Steel Socket/Copper Black M/P K C # 20 Steel Stud/Cooper Black C/P K M # 20 Steel Stud/Cooper Black M/P K C # 20 Steel Eyelet/Shiny Brass C/P K M # 20 Steel Eyelet/Shiny Brass M/P K C # 20 Steel Cap/Shiny Brass C/P K M # 20 Steel Cap/Shiny Brass M/P K C # 20 Steel Socket/Shiny Brass C/P K M # 20 Steel Socket/Shiny Brass M/P K C # 20 Steel Stud/Shiny Brass C/P K M # 20 Steel Stud/Shiny Brass M/P K C # 24 Brass Eyelet Nickel C/P K M # 24 Brass Eyelet Nickel M/P K C # 24 Brass Cap/Nickel C/P K M # 24 Brass Cap/Nickel M/P K C # 24 Brass Socket/Nickel C/P K M # 24 Brass Socket/Nickel M/P K C # 24 Brass Stud/Nickel C/P K M # 24 Brass Stud/Nickel M/P K C Brass Low Bed Stud M Brass Low Bed Stud C # 24 Brass Eyelet/Copper Black C/P K M # 24 Brass Eyelet/Copper Black M/P K C # 24 Brass Cap/Copper Black C/P K M # 24 Brass Cap/Copper Black M/P K C # 24 Brass Socket/Copper Black C/P K M # 24 Brass Socket/Copper Black M/ P C # 24 Brass Stud/Copper Black C/P K M # 24 Brass Stud/Copper Black M/P K C # 24 Brass Eyelet/Shiny Brass C/P K OSBONE DESCIPTION 4717-M # 24 Brass Eyelet/Shiny Brass M/P K C # 24 Brass Cap/Shiny Brass C/P K M # 24 Brass Cap/Shiny Brass M/P K C # 24 Brass Socket/Shiny Brass C/P K M # 24 Brass Socket/Shiny Brass M/P K C # 24 Brass Stud/Shiny Brass C/P K M # 24 Brass Stud/Shiny Brass M/P K C # 24 Brass Eyelet-XL Nickel C/P K M # 24 Brass Eyelet-XL Nickel M/P K C # 24 Brass Cap-XL Nickel C/P K M # 24 Brass Cap-XL Nickel C/P K C # 24 Steel Eyelet/Nickel C/P K M # 24 Steel Eyelet/Nickel M/P K C # 24 Steel Cap/Nickel C/P K M # 24 Steel Cap/Nickel M/P K C # 24 Steel Socket/Nickel C/P K M # 24 Steel Socket/Nickel M/P K C # 24 Steel Stud/Nickel C/P K M # 24 Steel Stud/Nickel M/P K C # 24 Steel Stud/Low bed C/P K M # 24 Steel Stud/Low bed M/P K C # 24 Steel Eyelet/Copper Black C/P K M # 24 Steel Eyelet/Copper Black M/P K C # 24 Steel Black/Copper Black C/P K M # 24 Steel Black/Copper Black M/P K C # 24 Steel Socket/Copper Black C/P K M # 24 Steel Socket/Copper Black M/P K C # 24 Steel Stud/Copper Black C/P K M # 24 Steel Stud/Copper Black M/P K C # 24 Steel Eyelet/Shiny Brass C/P K M # 24 Steel Eyelet/Shiny Brass M/P K C # 24 Steel Cap/Shiny Brass C/P K M # 24 Steel Cap/Shiny Brass M/P K C # 24 Steel Socket/Shiny Brass C/P K M # 24 Steel Socket/Shiny Brass M/P K C # 24 Steel Stud/Shiny Brass C/P K M # 24 Steel Stud/Shiny Brass M/P K SCEW STUD Brass screw stud. Used on furniture, automobiles, recrtional vehicles, manufactured housing, etc. Designed to snap into a snap ring and shell after it s fully assembled. Available in two length sizes: 3/8 and 5/8. O sborne No. Descriptio n 47-3/8C Br. Screw stud 3/8" pk /8M Br. Screw stud 3/8" pk /8C Br. Screw stud 5/8: pk /8M Br. Crew stud 5/8" pk

72 SEWING TOOLS SAIL PALM 265 A fine quality lther palm with vinyl iron thimble. iveted joints. Furnished either in right or left hand. ight hand will be furnished unless otherwise specified. Description 265-H Sail palm - right han d LH Sail palm - left han d SEWING PALM 266 A fine quality lther palm with vinyl iron thimble. iveted joints. Furnished either in right or left hand. ight hand will be furnished unless otherwise specified. Description 266-H Sewing palm - right hand LH Sewing palm - left hand OPEN END THIMBLE 510 Nickel plated brass thimbles. Coarse grate. USA Siz e Siz e (oz ) No. ( 00 ) 51/ ( 0 ) 21/ ( 1 ) 3/ ( 2 ) 43/ / / CLOSED END THIMBLE 511 Nickel plated brass thimbles. Coarse grate. USA ( 00 ) 51/ ( 0 ) 21/ ( 1 ) 3/ ( 2 ) 43/ / /

73 EGULATOS/PINS UPHOLSTEES' EGULATO - With eye Extra light Light Hvy 306½ Gauge Gauge Gauge Packed regulators per package EGULATO - With plastic handle UPHOLSTEES' PINS Packed per gross. Gauge / / Packed regulators per package. 190S Special packing 3 dz. to a box Gauge / "T" PINS 189 TWIST PINS 199 per box / / Packed 1/2 lb. to a box / Packed 100 or 5000 per box. Made of steel. Plastic hd.best quality. PLASTIC HEAD PINS Packed 100 per box. 193 Color per box 193-B Blue 2 1/ ed 2 1/ Y Yello w 2 1/ PUSH PINS 183 per box Packed 100 per box. No. 1-1/ DESSMAKES' PINS 198 Packed 1 lb. to a box. GLASS HEAD PINS 181 Packed 100 per box / / / / per box 1 1/ MONOFILIMENT THEAD 4705 A clr thrd. Blends in with fabric being sewn and is very strong. 18 very light thrd is for bar tacking, rging, quilting, etc. No 40 is for general upholstery work, canvas, etc. No 52 extra hvy duty thrd is for hvy fabric, canvas, etc. 73

74 NEEDLES OSBONE NEEDLE GAUGES OSBONE needles and pins have long been considered a standard for fine quality. Experience and efficiency in the art of needle making for over one hundred and seventy yrs have produced the dependable tools well known throughout the trade as OSBONE NEEDLES AND PINS. The uniform quality of these needles and pins is carefully maintained by the consistent efforts of the skillful craftspeople who make them. All are nickel plated. Papers cannot be broken. Quotation for special needles upon request. OSBONE needles are gauged by the Standard Wire Gauge as illustrated opposite. The gauge sizes are also listed in thousandths of an inch and millimeter sizes in thousandths are also shown. Actual diameter of wire English gauge Decimal Decimal equiv. (inch) equiv. (mm) / / / Curved needles are listed in this catalogue according to length (over all) from eye to point. The bottom lines in the following table of msurements also gives the shortest distance (across) from eye to point / inches over all 1 1 / / / / / / / / 4 inches across 74

75 NEEDLE KITS K-1 K-10 K-3 Each kit contains: 2. Curved upholstery needles: 2" & 2½" 1. Special bent needle for sewing up fowls or wherever sewing with a string is needed. Each card is composed of 4 round point needles in following sizes: 3", 4", 5" & 6". Kits per box per box Awning or canvas needle - (can be used on sails too). 1. Carpet or very hvy material needle. per kit 8 oz. 150 Each kit contains 20 Sewing needles, 10 Darners and 1 Thrder Kits per box per box K-4 STAIGHT OUND POINT NEEDLES K-5 Each card printed in attractive yellow and blue and is cellophane covered to protect against rust. 1. of following sizes: 6", 8", 10" & " Kits per box per box Each card is composed of 4 diamond point needles in following sizes: 3", 4", 5" & 6". Kits per box per box K-11 K- K-15 K-7 Each kit contains 25 assorted handsewing needles: 10. #7, 10. #5 5. #3. Kits per box per box Each kit contains 5 Chenille & 5 Tapestry needles: 1. #18, 2. #20, 2. #22. Kits per box per box Each kit contains assorted Darners sizes 0/5. Kits per box per box Each card is composed of 4 round point extra light needles in following sizes: 2½", 3", 3½" & 4". Kits per box per box ALL CADS AE PACKED CADS PE BOX AND BOX CANNOT BE BOKEN 75