WORK HOLDING DEVICES - VISES

Transcription

1 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 WORK HOLDING DEVICES - VISES ULTRA PRECISION MILLING MACHINE VISES WITH SWIVEL BASE SERIES 88: Special construction prevents tilting of jaw and work. Manufactured to highest precision standards with many features including: totally enclosed lead screw, hardened and ground and easily removable jaws, ground top and bottom surfaces, coolant trough, graduated swivel base, flame hardened vise bed, etc. Width Height Overall of s of s * Height Weight 4 -/8 4 4-/4 4 lbs /2 5-/2 07 lbs /4 7 5 lbs. 508 * By repositioning the jaws the clamping can be increased. ULTRA PRECISION MILLING MACHINE VISE - TYPE II SERIES 88: Similar features to above vises but without Swivel Base. Perfect for multiple vise setups on NC/CNC Machines. Permits fast, accurate multiple machining. All sides accurately ground permitting clamping in different modes (upright, vertical, and sideways). Width Height Overall of s of s Height Weight -/4 5-/4 4-/ lbs. 550 $0.00 $5.00 $20.00 $04.95 ULTRA PRECISION MILLING MACHINE VISE WITH TWO CLAMPING STATIONS SERIES 88: WORK STOPS FOR VISES SERIES : KURT SERIES 88: MEDA For use with SERIES & 88 type vises. Permits fast, completely accurate positioning of repetitive work. MEDA KURT Width $ $ $ SPEED HANDLES FOR VISES SERIES : KURT SERIES 88: MEDA Fits all SERIES & 88 type vises. Hex MEDA KURT Width Size 4 9/ $ / $ / $ VERSATILE LOCK VISES SERIES : The Kurt Versatile Lock Vises are designed for maximum workholding versatility in most CNC machining applications. Versatile Lock vises are stronger, lighter and more easily mounted than any other precision machine vise. With their modular design they are easily convertible in special clamping situations. Hydraulic and Air models also available; please inquire. FEATURES Can be mounted upright or on either side clamping repeatability Foot print on the short version ( 20V) is, ideal for the smallest machines. 0 year limited warranty JAW PLATE POSITION $0.2 $90.25 $4.50 $95.00 $2.00 Produce twice the parts per table load. Reversible jaws can be changed from standard to stepped part holding mode for thin or small parts. Every side of body is precision ground and the height matched within +0.5, can be mounted in multiples - parallel or vertically. High precision and rigidity. Anti-tilt mechanism eliminates the life of movable jaw. The advanced structure can avoid clamping deflection by transmitting equal and opposing force into the stationary jaw. Ductile cast iron body with hardened upper guide surface for improved rigidity and wear resistance. s Width 52 Height -/2 Vise Height 5 OAL 24 Weight 0 lbs $95.00 * Wt. Type Width Length lbs. Standard 00V $794.0 Short 20V $85.50 *In AA position Plate Maximum Position Standard Short BB CC DD

2 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 ANGLOCK D-SERIES VISES SERIES : The original KuRT AngLock D-Series Vises are designed for precision part clamping on basic machine tools such as knee type mills, grinders and machining centers. D-Series vises are ideal for use in running production parts where datums, flatness and parallelism is important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel, and iron, in your KuRT AngLock Vises. All KuRT vises have a friction reducing, needle bearing, thrust collar on the screw. The needle bearing increases jaw clamping pressure. OTHER FEATURES AngLock design assures the moveable jaw does not lift. Hardened jaw plates. Semi-hard steel screw. 80,000 PSI ductile iron construction. Ten year limited warranty. AccESSORIES Swivel bases, workstops, keys and a variety of jaw plates. * PageNo Width Length Weight. 4-7/ D / D D D / D $.45 $ $58.90 $52.80 $ WORK HOLDING DEVICES - VISES * With jaw plates in AA position (see line drawing). SWIVEL BASES Fits Vise Wt. s D40-4-SA D D50-4-SA 20 D * D0-4-SA 2 D0, D75, D D80-4-SA 80 D80, D *LIMITED QUANTITy $44.00 $5.00 $24.00 $ Maximum Plate Width Position 4 5 * ** 8 0 BB 4-/8 5-/4 -/2 0-/ /2 4 CC -5/8 8-7/ 9-/4 -/ /4 -/4 DD 8-/4 0-5/ 2 5-7/ /4 24-/4 *D75 **D88 While we show only the most popular KURT items we can supply their entire range of products; please inquire. DOUBLELOCK VISES Doublelock vises offer cost savings productivity by maximizing the numbered parts in the work envelope. Hydraulic models also available; please inquire. Maximum Position Width GG HH JJ FEATURES Offers 2 clamping stations Large Capacity - DL40 x 4 each station - HDLMJ 4 x each station - DL800 x 8 each station.0002 repeatable clamping accuracy Performs first and second operations simultaneously. Precision ground on all sides 80,000 PSI ductile iron body Reversible hardened jaw plates Body height matched to within.00 0 Year limited warranty *In FF Position, each station Weight Width Length lbs. DL HDLMJ DL $5.00 $84.2 $

3 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 ANGLOCK PT-SERIES VISES SERIES : WORK HOLDING DEVICES - VISES The AngLock PT Series vises offer high precision function through these important design features: the original, timeproven Kurt AngLock designs prevents parts from lifting upward under heavy clamping loads; the pull-type jaw clamping reduces stationary jaw deflection by at least 80% as the movable jaw is pulled into the stationary jaw and not pushed like standard screw type vises. Hydraulic models also available; please inquire. FEATURES Pull-Type clamping means high precision and repeatability. up to 20,000 lbs. precision clamping force. Can be mounted upright or on either side. CNC style allows compact spacing. Both sides ground square to within.00 with base and top. 80,000-PSI ductile iron body. 0 year limited warranty. For Work Stops and Speed Handles see page 52 & 55. PT Series vises shown mounted back to back. * Wt. Width Length lbs. PT400A PT800A 8 7-/ *In V position KURT VISE ACCESSORIES SERIES : Plate Maximum Position 4 8 W -/4 2 X 8-9/ 5-/ Y -5/ -/ For Work Stops and Speed Handles see page 52 & 55. $20.05 $5.00 PJS MAGNETIC JAW PLATE AND PARALLEL SET The magnetic jaw set from Kurt comes complete with two jaw plates with an embedded earth magnet for holding the parallels in place, leaving hands free to hold and clamp the workpiece. This piece set includes: 2 / x x ground steel parallels. 2 / x -/4 x ground steel parallels. 2 / x - x ground steel parallels. D0-7 MAG hardened jaw plate with earth magnet. D0-5-MAG hardened Groove Lock jaw plate with earth magnet. WSRL 4 Kurt Groove Lock workstop. WSRLE Kurt Groove Lock extended workstop. wooden storage box. FEATURES Fits all Kurt inch vises. Powerful earth magnets hold the parallels in place securely. Genuine Kurt Groove Lock workstops are included. D0-5-MAG jaw plate also accepts the Kurt AWS Workstop. 000 MAGNETIC JAW PLATE Features powerful earth magnets for holding parallels securely in place, leaving hands free to hold and clamp the workpiece. Fast and accurate set ups. 000 $.00 $49.00 AWS WORKSTOP New adjustable workstop can be used on all Kurt high-density vises. It can also be used on any vise with a 5/-8 unc tapped hole in the base or side of the jaw. The body clamp has a 2 adjustment and features a long stop pin for fast and easy set ups. A long and short spacer is also available to fit almost any application; please inquire. FEATURES Versatile Economical Fast, easy set up Black oxide finish Fast accurate positioning of parts 00 $2.00 PARALLEL KEEPER Place your parallels in the vise against the jaws. Take the parallel keeper, squeeze it together and place it inside the parallels. Release the parallel keeper, it will push against the parallels, holding them against the jaws of the vise. It s that simple! Opens to inches. Your new revolutionary labor saver, your machinists third hand, is at work, saving part change time. 000 $

4 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 F-TYPE MILLING VISE SERIES: 48 K-TYPE MILLING VISE SERIES 92: Very sturdy construction. Semisteel body with precision acme thread lead screw. Smooth jaws are made of special steel, heat treated and ground and are easily replaceable. 4 hold down flanges for mounting. Trough returns coolant. Width Height Max. Overall of s of s Height Weight FMV4* 4 -/8 -/8 -/8 0 lbs $80.00 FMV* -/4 4-7/8 4-/4 72 lbs $5.00 FMV8* 8 2-/2 7-/4 -/8 20 lbs $20.00 * LIMITED QUANTITy UNIVERSAL -WAY ANGLE MACHINE VISE SERIES 5: Made of highest quality ductile iron. Angles can be set and securely locked in directions. 0 graduated swivel base. Vises tilt up to 90 in the horizontal/vertical plane and up to 45 in both right and left directions. Very sturdy construction. Semisteel body with precision acme thread lead screw. Smooth jaws are made of special steel, heat treated and ground and are easily replaceable. Vise is mounted on an easily removable graduated swivel base. Width Height Max. Overall of s of s Height Weight KMV4 4 -/ 2-5/ lbs $97.00 KMV5* 5 -/4 -/4 5-/2 55 lbs $25.00 KMV -5/8 4-9/ 5-7/8 58 lbs $59.00 KMV / 7-9/ 5 lbs $0.00 * LIMITED QUANTITy Max. Overall Overall Width Height Length Height of s of s (Lowered) (Lowered) Weight uav -/ -/ -5/8 5-/ 2 lbs. uav4 4-/4 -/2 4-/ 8-7/ -7/8 5 lbs. uav5 5-/4-5/8 5-5/ / 9 lbs $5.00 $50.00 $49.00 WORK HOLDING DEVICES - VISES B-TYPE MILLING VISE SERIES 9: Similar to Series 92 Vises, but with a coolant trough. Width Height Max. Overall of s of s Height Weight BMV4* 4 -/4 -/8 4-7/8 45 lbs MBV5* 5-7/ -/2 5-/4 80 lbs BMV -5/8 4-9/ 5-7/8 75 lbs. 000 BMV8* 8 2-/2 -/ lbs $25.00 $5.00 $27.00 $ COMPOUND MACHINE VISES SERIES 44: Three graduated dials enable work to be held at any compound angle. Precise construction allows vise to be locked accurately. Vises are made of high grade semi-steel and the jaw faces of specially selected hardened and ground steel. Width Height Max. Overall of s of s Height Weight 4 2-/4 -/4 25 lbs /8 4-/2 8-/4 0 lbs $00.00 $7.80 * LIMITED QUANTITy 2 WAY ANGLE MILLING MACHINE VISES WITH SWIVEL BASE SERIES 88: This two angle milling machine vise makes most angle settings possible. The moveable jaw, body and swivel base are made of semi-steel. Remaining parts of high quality alloy steel. The jaw plates are hardened and ground. Grooved, Step and Angle jaw plates available; please inquire. The vise rotates 0. The lead screw is fully covered. This vise can incline from the horizontal position to an angle of 45 up or down. Vises are provided with two mounting bolts with T-nuts and one wrench. Width of s 4 Height of s -/4 2-/8 Max 4 Overall Height -/4 8 Weight lbs $0.00 $ WORK STOP SERIES 88: $.0 Adjustable, spring loaded clamp for vises. Fits all milling vises with /8 (9.5mm) thru (.0mm) wide jaws. Body (25mm) wide with two steel guide pins for positive clamping. Mounts quickly with one socket head screw 55

5 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 WORK HOLDING DEVICES - VISES 2-POSITION SELF-CENTERING MILLING MACHINE VISES SERIES 95: FOR HOLDING SHAFTS & ROUND WORKPIEcES 2-PIECE MILLING MACHINE VISES SERIES 44: Two piece construction results in utmost clamping flexibility, on work pieces ranging from short to extra long. Body made of meehanite casting. s are hardened and precision ground. Small movement of detachable handle grips work firmly for even the heaviest cuts. Each half supplied with key slots and wedges for exact locating on machine table. Size Width Weight lbs /4 40 lbs This vise is used for clamping round workpieces with diameters from.94 to.0. For use on a milling machine or drill press. Width of s 4 Shaft Min. - Max. $80.00 $ SPEcIAL FEATURES The jaw plates are case-hardened and heat-treated to Rockwell C The vise body and 2 movable jaws are made of semi-steel. Vises can be set up in two positions. The adjustable sliding rod enables the workpieces to be set in the same position repeatedly. Vises are supplied with 2 clamping bolts, wrench, V-block and sliding rod. Overall Height.9 Width of s OAL 2.00 Max clamping Power lbs. Height of s.8 00 Max.5 Weight lbs. 5 Overall Height Weight lbs..5 $70.50 quick ACTING MACHINE VISES SERIES 89: These instant clamping vises are ideal when a large number of the same parts has to be machined on milling machines or drill presses. The clamping of the workpiece is done by a single movement of the lever. This vise saves a lot of time with it s fast clamping mechanism. The base and movable jaw are made of semi-steel. The jaw plates are casehardened and heat-treated. The heavy base has six clamping slots and can be clamped to a milling machine table with two bolts. The quick-acting cam can be set instantly to hold work. plate with horizontal & vertical grooves can clamp different shaped workpieces in different positions. Special 4-position jaw plate is available; please inquire * $5.00 SHAPER & MILLING MACHINE VISES WITH SWIVEL BASE SELF - CENTERING SERIES 89: HEAVY DUTY SHAPER VISES SERIES 89: * LIMITED QUANTITy This self-centering, heavy duty, large vise is designed for heavy milling or planing operations. Two movable jaws, body and swivel base are made of semi-steel and remaining parts of high quality alloy steel. The jaw plates are hardened and ground. Grooved, Step and Angle jaw plates available; please inquire. The vise can swivel on the base up to 90. Vises are provided with two mounting bolts with T-nuts and one wrench. Width of s 8 5 Height of s Maximum Overall Height Weight lbs. Vise Rugged construction. Large. Removable jaws. 0º swivel base. Rectangular base. Max. Overall Overall Width Lgth Height Width of s of s (Lowered) (Lowered) Overall SMV0 0 2-/4 2 -/4 8-/4 8-/8 SMV2 2 4-/8 4-/8 8-/4 2 Length PageNo of Base of Base Weight * LIMITED QUANTITy $5.5 SMV0* 8 2-/2 20 lbs. PageNo SMV2* 20 4-/2 0 lbs * LIMITED QUANTITy $59.00 $752.00

6 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 DRILL PRESS VISES SERIES 99: For small drilling, tapping and grinding. Can be turned on either side or stood on end. Accurately machined and assembled from high tensile cast iron. Hardened and ground jaws have horizontal and vertical grooves for holding round work. Width 2-/2 -/2 4-/2 -/2 -/4 -/4 2-/2 -/2 4-/ ADJUSTABLE ANGLE VISES SERIES 99: All features of above vises, plus... Adjustable up to 90 Base has slots for mounting Width $20.50 $27.20 $9.25 HEAVY DUTY DRILL PRESS VISE SERIES 402: DRILL PRESS VISES FLANGE TYPE SERIES 402: Flanged base for easy clamping to table. Body made of selected cast iron. Four slots for easy clamping to table. Width -/ / / / SPEcIFIcATIONS Width: : 2-/4 : Overall Height: -/4 Overall Length: 2 Overall Width: 8 Weight: 2 lbs 2050 $09.50 $4.50 $8.00 $25.25 $2.50 WORK HOLDING DEVICES - VISES 2-/2 -/2 4-/2 -/2 -/8-5/8 2-/8 4 SWIVEL AND TILT VISES SERIES 99: $2.00 $.00 $45.50 UTILITY VISE SERIES 40: All features of above vises, plus... The base has keyway and two bolt slots for locating and mounting on machine table. Mounted on swivel base, providing complete 0 rotation. Width 2-/2 -/2 4-/2 -/2 -/8-5/8 2-/ $5.0 $40.90 $5.75 Sturdy construction makes this vise suitable for general machine work (milling, drilling, grinding, etc.) Moveable jaw has vertical V groove for holding round work. lugs for clamping to machine table. Low 2-/2 Overall Height. Width -/2 -/ $9.50 quick GRIP DRILL PRESS VISES SERIES : FEATURES : Instant setting by moving sliding steel bar attached to moveable jaw. Locking lever can be set instantly to hold workpiece. Body and sliding jaw are made of high tensile castings. Lead bar, sliding bar and locking lever are hardened and ground. Bolt lugs for clamping. Hollow base for clear through drilling. Removable jaw plates are recessed for easy leveling of workpiece. Width Weight -/ / -5/ / -/ / s 00 and 004 are precision ground on both sides so that these vises can be used on their sides. Width Weight -/8 2-/4 -/ /8 -/ $8.75 $77.50 $7.70 $5.00 $05.85 $

7 WORK HOLDING DEVICES - VISES from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 CROSS SLIDE VISES SERIES 44: Heavy duty cross slide vise moves workpiece in both horizontal and longitudinal directions for precise centering and drilling. Independent cross feed and traverse. Cast iron body with mounting lugs Adjustable gibs. Adjustable, graduated dials. Width 4 5 -/8-7/ -9/ -5/8 2-/4 -/4 4-/4 5-/4 BENCH VISES - SWIVEL BASE SERIES 44: 0 Swivel Heavy Duty Castings Steel s Acme Thread Operating Screws Positive Lock Concealed Screw unbreakable Nut Height 4-5/8 5-/8 -/8 -/4 Table Travel x 5 4 x 5 x 7 x 8 Weight (lbs) Width of s (inches) of s (inches) $.50 $42.50 $5.75 $80.00 of s (inches) BENCH VISES WITH SWIVEL BASE SERIES 98: Removable hardened alloy steel jaw inserts. Completely enclosed center screw. Attractive hammered enamel finish. Weight LIMITED QUANTITIES Weight Width Lbs 2-/2 BH -7/8 -/4 5 lbs BH 4 2-/4 4-/4 40 lbs BH 5 -/4 -/2 7 lbs BH -/ lbs /2 $9.00 $7.5 $ $ $20.5 $.20 HEAVY DUTY MULTI-PURPOSE ROTATING VISES SERIES 98: Full 0 rotational jaws. Head swivels 0. Machine cut parallel jaws. Larger, stronger pipe jaws. unique V jaws provide 4 point holding power. s Parallel Throat Width Open Dept. Pipe s Max. Open V s Max. Open Anvil Size Wt lbs BABY BENCH VISES SERIES 98: Versatile tool for filing, flattening or laying out work. Anvil Size/ Description Width 4 -/ /4 2-/2 -/2 -/2 2 -/4 -/2 4 7-/4 2-/8x-/8 2-/2x-/2 x $75.00 $05.00 $ Baby bench vise fixed 2 /50mm Baby bench vise with 2 /50mm swivel base $5.5 $7.90 STANDARD PANAVISE SERIES 45: 0 The original! The 0 Standard PanaVise is an allpurpose work holding unit, perfect for both industrial and home hobbyist applications. A single knob controls the tilt, turn and rotate function of the patented split ball, which allows the head to move easily and conveniently through three planes (0 rotation, 0 swivel and 90 pivot). s are 2-/2 (4mm) wide and open to 2-/4 (58mm), and the base features a 4-5/ (mm) bolt circle. The combination stands -/4 (7mm) tall, weighs 2 lbs. oz. (.2kg) $ VACUUM BASE PANAVISE SERIES 45: 8 The 8 Vacuum Base PanaVise provides all of the tilt, turn and rotate versatility of a 0 Standard PanaVise with the convenience of added portability. A half turn of the mount lever attaches or releases the powerful suction pad and allows rapid set-ups in a variety of locations (for use on smooth, nonporous surfaces only). This combination stands -/8 (57 mm) tall and weighs 2 lbs. oz. (.kg) $9.99

8 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 MECHANICS VISES SERIES 79: Replaceable hardened steel serrated jaw inserts and replaceable pipe jaws provide sure grip. 2 year GUARANTEE MEETS ALL GOVERNMENT SPEcIFIcATIONS Wilton s Mechanics Vises are the best buy for professional mechanics. Width /2 5-/4 5- Throat -7/ - 4-/8 Pipe /4-2 /4-2-/2 /4 - -/2 Ship Wgt. lbs. Ea TRADESMAN SWIVEL BASE VISES SERIES 79: year GUARANTEE MEETS ALL GOVERNMENT SPEcIFIcATIONS Sturdy swivel base has serrated teeth on the inside track of the base. This positive locking action prevents slippage of the vise. Width 4-/2 5-/2 -/ /2 7 Throat -/ Pipe /4-2-/2 /4 - /4 - -/2 /8 - -/2 Top jaws are reversible - either standard serrated jaws for extra grip on sturdier materials or smooth jaws for more delicate pieces. 0,000PSI ductile iron Precision thrust bearing creates greater clamping pressure and increased longevity. Ship Wgt. lbs. Ea * 755* 75* 780A Heavy duty 0,000 PSI castings for long life and added strength $2.50 $20.00 $08.75 Replaceable top & pipe jaws $48.75 $ $ $89.75 Exclusive straight line design - positions spindle and nut horizontally, reducing thread wear and increasing clamping power. New WIDER JAWS! Extra /2 added to already generous jaw width on 745, 755, and 75. Provides greater clamping surface. Large anvil Fully enclosed spindle Straight line design Large anvil. Enclosed, unbreakable box frame, steel channel. Swivel base rotated 0 and has double lockdowns ensuring maximum stability. Pedestal Base for Swivel Base s Perfect for 755 and 75 Tradesman Swivel base models. -/2 Tall Base. Made from fabricated steel. WORK HOLDING DEVICES - VISES Pedestal Base fits models 755 & V $ * usa Made of usa and Canadian Components MACHINISTS SWIVEL BASE VISES SERIES 79: 5 year GUARANTEE. MEETS ALL GOVERNMENT SPEcIFIcATIONS. Width -/2 4 4-/2 5 5-/4 -/2 7-/2 8 0 Throat 2- -/2 4 4-/4 5-/2 Ship Wgt. lbs. Ea S 400S* 450S 500S 00S * usa Made of usa and Canadian Components $ $.75 $7.25 $048.5 $40.00 Hardened steel jaw, replaceable inserts are machine serrated for safe, sure grip under maximum torque. 0,000PSI ductile iron Precision thrust bearing creates greater clamping pressure and increased longevity. Extra deep throat - Wilton s design gives you more working room where it counts. Large anvil Enclosed design keeps contaminants out, lifetime lubrication for smooth operation. Locking swivel base - 0 rotation is enhanced by serrated swivel base with double lockdowns for non-slip holding and four mounting points. COMBINATION PIPE & BENCH VISES SERIES 79: 5 year GUARANTEE MEETS ALL GOVERNMENT SPEcIFIcATIONS The Workhorse of the Wilton Vise Line-up. Perfect to handle any workholding jobs your maintenance or construction crew encounter. Massively Built. Tool Steel Serrated Top s & Pipe s. Width -/2 4-/ Throat 4-/ / -5/8 Pipe /8-2-/2 /8 - -/2 /8-4-/2 /4 - Ship Wgt. lbs. Each * usa Made of usa and Canadian Components C-0 C-* C-2 C Built for the Toughest Applications Plant Maintenance Oil Field Service Heavy Construction $82.50 $ $00.00 $88.75 Self-centering pipe jaws - hardened steel jaws hold up to pipe safely, securely. Precision thrust bearing creates greater clamping pressure and increased longevity. Alloy steel slide bar added strength and keyed for a precision fit. Hardened steel jaw insets - machine serrated, replaceable jaws assure a positive hold. 0,000 PSI tensile ductile iron body parts for mass and strength. Large Anvil. Enclosed construction keeps lubrication in, contaminants out. Locking swivel base - with double lockdowns for nonslip hold in any position. 59

9 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 UTILITY WORKSHOP VISE SERIES 79: WORK HOLDING DEVICES - VISES The Durable 00 Series Utility Vise is America s Value Vise Versatile, all-around vises. Handles a variety of applications. Perfect for use in utility and light duty applications. For heavy duty application, use the Wilton Combination Pipe & Bench Vises Machinists Vises or Tradesman Vises (all on page 57). Width 4-/2 5-/2 -/ /2 7-/2 Throat 2-5/8-7/ -/ 4-/ 4-/2 Pipe /8-2 /8-2-/2 /8-2-/2 /8 - /8 - MACHINIST S VISES SERIES 79: Strong, ductile iron main castings are guaranteed against defects in workmanship and materials. Steel jaw faces made from hardened tool steel - have deep knurled pattern to ensure positive gripping. All sizes feature a generous ground/polished anvil. Plain jaw faces are available on request. Width 4 4-/ Throat -5/8 4-/8 4-/4 Wt Wt M 04-/2M 05M HD 48HD 04M Stationary models have a flat base, making it unnecessary to modify bench top for mounting. Swivel base models rotate 0 and gear lock bolt ensures positive locking against slippage. $5.25 $.75 $94.40 $97.50 $2.90 $54.40 $7.50 $.5 Replaceable, serrated steel top jaws for a tight grip. NEW DESIGN Rugged 0,000 PSI body casting. Features a formed steel channel beam. 7 MULTI-PURPOSE MACHINIST S VISE SERIES 79: Width: 5-/2 Throat : - Pipe : /8 - Wt.: 50 lbs. : 4500 opening expands to incredible 9- when reversed. When jaws are in normal position, jaw width measures 5-/2 wide with opening. Grey iron main castings. 5-/2 9-* Built-in pipe jaws to handle various pipe sizes. Large anvil with plenty of work surface. 80 swivel base with locknut Replaceable, hardened tool steel jaw faces. * With 4500 vise jaws in reverse position. Two working anvil surfaces. Two lock down bolts are furnished. Swivel base with four mounting lugs allows for 0 swivel. $7.90 SUPER JUNIOR VISES SERIES 79: VISE ACCESSORIES SERIES 79: New Super Junior Vises come in 2 styles- Clamp-on & Swivel Base. Both clamp-on models are portable. Top s are grooved and replaceable. Spindle is fully enclosed. Double lockdowns ensure stability. Both swivel and clamp-on base models can rotate 45 left or right on base. Clamp-on opening for CBV-5 = -5/8 Clamp-on opening for CBV-00 =. Width /2 4 2-/2 4 2-/8 2-/4 2-/8 2-/4 Wt clamp-on Base CBV-5 CBV-00 Swivel Base SBV-5 SBV-00 cbv $.75 $4.25 $97.50 $.75 IMPROVE clamping VERSATILITy & SAFETy WILTON copper JAW caps Permanent or Temporary Work-Holding. Designed to avoid marring the surface of softer metals and to protect jaw face. 00% Copper Caps have polished faces and pliable copper extensions for a sure-grip fit on any make vise. Width -/2 4 4-/2 5 5-/2 -/ / / / / $0.90 $4.90 $47.5 $4.50 $9.90 $8.25 $95.90 $2.90 $54.40

10 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 MULTIPURPOSE CLAMPS - USA SERIES 72: Lightweight and 40% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4: clamping ratio. Built-in V blocks for round or rod stock. Full support, no loose pads to walk off center. Copper plated jaws & screws are ideal for welding clamps. Max. Open closed Throat Throat A B E 40 /2 / /8 -/ /2* 2-7/ -/ /4 -/ /2* 2-/4 -/ /8 -/ * 4-/2 5-/ /8 5-/ *Deep throat type. ROUND HANDLE CLAMPS SERIES 72: $0.55 $2.75 $4.05 $8.20 $.40 $.0 $2.20 $85.45 $20.5 $.0 C CLAMPS SERIES 08: HEAVy DUTy c-clamps Drop forged and designed with a deep throat. Copper plated screw and swivel pad to prevent weld splatter from sticking to them. Screw Max. Min. Dia /4 / /8 / /8 5/ /8 / /4 / /4 / /4 7/ SPRING CLAMPS SERIES 79: Steel Spring clamps Nickel plated for durability and corrosion resistance. Tempered steel spring maintains substantial pressure at the jaw tips. Ergonomic-shaped handles and jaws are available with polyvinyl covers for comfort, as well as protection of workpieces. Max. Open. Pipe Size Overall Length Ship case Qty. Ship Wgt. lbs. Ea. MODEL $.95 $9.00 $2.05 $20.05 $0.0 $8.5 $55.00 Steel Spring clamps with protective handles & grips /4 /4 / * 7909 $2.20 $.05 $.0 *LIMITED QUANTITy Max. A -/2 2 Open Throat B /8 /2 -/8 -/8 closed Throat E /8 /2 -/ $0.20 $.40 $2.00 $4.70 PARALLEL CLAMPS SERIES 07: quick ACTING FIxTURE CLAMPS SERIES 72: s are made of hardened and tempered steel. Clamps are equipped with spring clips. Length Each A B.92 - /2 T-slot Mounting /8 T-slot Mounting c 2-/ 2-/ - - E 4 4-/8-7/8 7-/ $20.50 $27.0 $9.0 $55.5 -/ /4 2-/ / / / / $4.25 $4.95 $.55 $8.25 $4.95 $7.50 $

11 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 Deep Throat Pattern Parco-Lubrite Finish Our most popular and versatile pattern. Frame is drop forged Carbon Steel; all other parts are machined from Carbon Steel. Throat Screw Min.Proof Weight Max. Min. Dia. Test, lbs. lbs. Standard Screw -/2 0 -/8 / $ / $ /8 / $ /4 / $ /8 / $ /2 / $ /8 / $ /4 7/ $0.05 Full Length Screw /8 / /4 7/ C CLAMPS STEEL, NATURAL FINISH SERIES 90: $8.20 $2.70 Deep Throat Pattern Zinc Plated Design and materials are exactly the same as Parco-Lubrite finish. However, forcing screw is zinc plated to resist the adhesion of welding splatter. Throat Screw Min. Proof Weight Max. Min. Dia. Test, lbs. lbs. Standard Screw -/2 0 -/8 / $ / $ /8 / $ /4 / $ /8 / $ /2 / $ /8 / $ /4 7/ $8.5 Full Length Screw /8 / /4 7/ $98.90 $25.0 Deep Throat Pattern High Visibility Finish Same in all respects-except for finish- as other Deep Throat C- Clamps, above. However, High Visibility Clamp Frames are finished in your choice of Safety Yellow or Safety Orange high-gloss bakedon enamel. Screws and handles are finished in black. Easy to see; hard to lose or misplace. High Visibility C-Clamps are furnished with standard screws only. Tool Maker s Pattern Parco-Lubrite Finish Small, lightweight C-Clamps are ideal for pattern making, wood working and other light duty applications. Both frame and screw are drop forged from Carbon Steel. Square below thumb screw head allows screw to be set up extra tight with a wrench. Throat Screw Min. Proof Weight Max. Min. Dia. Test, lbs. lbs. yellow Frame -/2 0 -/8 / $ / $ /8 / $ /4 / $.5 0-5/8 / $ /2 / $ /8 / $ /4 7/ $4.45 Orange Frame -/2 0 -/8 / / /8 / /4 / /8 / /2 / /8 / /4 7/ $.45 $24.80 $.5 $.5 $50.40 $.45 $84.5 $4.45 Throat PageNo Max. Min. Dia. Weight 0 / 5/ / /8.4 5/ / /4 -/8 7/ While we show only the most popular $45.0 $52.95 $8.0 $94.20 ARMSTRONG items we can supply their entire range of products; please inquire. 572

12 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 C CLAMPS SERIES 90: Heavy Duty Pattern The strongest C-Clamp made. Square-head screw has hardened point. Screw does not include a handle it must be tightened with a wrench. Extra long hub helps prevent springing even under great stress. Inches Max. Min / -5/ -/4 2-/8-5/ 4-5/8 5-/8-5/8 8-/4 0-/8 2-/ /2 5/8 -/4 2-/2 2-/4 4-/4 -/8 Heavy Duty Pattern, With Full-Length Screw Inches Max. Min /8-5/ 4-5/8 5-/8-5/8 8-/4 0-/8 2-/ Throat 5/8 5/ -7/ -9/ 2 2-7/ 2-7/8 -/4 -/8 -/2 Throat -9/ 2 2-7/ 2-7/8 -/4 -/8 -/2 Screw Dia. /8-7/ - 4 5/8 - /4-0 7/ /8-7 -/4-7 -/4-7 -/4-7 Screw Dia. /4-0 7/ /8-7 -/4-7 -/4-7 -/4-7 Min. Proof Test, lbs. 2,800 5,00 8,750 2,500,250 20,000 2,800 27,500,250 5,000 40,000 Min. Proof Test, lbs. 2,500,250 20,000 2,800 27,500,250 5,000 40,000 Weight lbs Weight lbs $.5 $2.45 $.5 $8.5 $97.85 $.0 $5.00 $.40 $24.5 $.05 $47.70 $85.50 $.50 $57.5 $4.0 $28.80 $.80 $45.55 $00.05 Drop Forged carbon Steel T-SLOT CLAMPS SERIES 90: A unique tool for holding down work on all machine tools equipped with slotted tables. Because they are drop forged from Carbon Steel, Armstrong T-Slot Clamps embody strength far beyond that required for normal clamping operations. And should any slight spring ever occur under extreme conditions, the drop forged frame will not take a permanent set. It s therefore safe to predict your Armstrong T-Slot Clamps will outlive the machine tools you intend to use them on. And over the years, they ll save countless hours of operator set-up time, paying for themselves many times over. Screw features Armstrong s patented ball-joint swivel padthe most secure and permanent system for locking pad to screw. Pad is V-notched to aid clamping of small rounds. T-Slot Clamp body, screw and handle are black finish. Each clamp is furnished with one T-Slot Bolt, Washer, and Hex Nut. PageNo T-Slot Bolt clamping Weight In. Size, In. In. lbs to 2-/4 0 to -/4 0 to -/4 /2 x -/2 5/8 x 2 /4 x 2-/2 2 2-/4 2-/ $2.70 $20.5 $.7 SET-UP WEDGES SERIES 90: Lgth Width Max. Thickness Weight Inches Inches Inches lbs /4 /4 /2 /4...8 $8.25 $4.00 $.85 57

13 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800) SERIES C-CLAMPS SERIES 79: Drop Forged, Regular Duty, Extra Deep Throat This is Wilton s number one C-Clamp line. Series 400 clamps include all the Wilton innovations: drop-forged steel frame, extra throat depth, Perma-Pad, lacquer finish - plus innovative design frame geometry for maximum strength. Spindles and Perma-Pads are black oxide coated to resist corrosion. 400 Series bodies are heat treated. Spindle and pad are replaceable. Provided in individual boxes, Wilton 400 C-Clamps are high quality tools. 800 SERIES C-CLAMPS SERIES 79: Standard Throat - Regular Duty, Regular Throat The 800 series is recommended at a value alternative for clamping work not requiring as much throat depth or clamping pressure as a 400 series clamp. 800 series are drop forged, equipped with Wilton Perma-Pads and a precision-cut, single-lead, Acme thread. 0-2 / /4 0 - / 0-8 /4 2-0 /8 2-2 / /2-0 /8-2 Wilton exclusive Perma-Pads Hi-Tech frames - stronger and deeper throat depth. Throat 2 /4 2 /2 /4 4 /8 5 5/ Throat -/ -5/ 2-5/ 2-5/ -7/ - -7/8 Spindle Diameter 9/ 9/ 7/8 Spindle Diameter 9/ 9/ 5/8 5/8 Min. Proof Test lbs Min. Proof Test lbs Ship. case Qty. Ship. case Qty. Ship. Wgt. lbs. Ea. -/4 2-/4 -/4 5-/2 -/4 0-/4 4-/2 Ship. Wgt. lbs. Ea. -/4-5/8 2-7/8-7/8 -/4 8-/ $5.00 $8.5 $2.70 $40.00 $50.00 $7.5 $.70 $.5 $.70 $2.70 $5.00 $4.5 $.70 $00.00 HARGRAVE C-CLAMPS SERIES 79: Super-Junior Forged c-clamps Super Junior clamps are forged steel with heat treated frames to provide a much stronger clamp than pressed steel or malleable clamps. Steel screws are nickel plated for longer life / / /2 Throat -/2 -/4 -/2 -/4 -/8 2-/2 Min. Proof Test lbs , Ship. case Qty Ship. Wgt. lbs. Ea. /4 /4 /4 /4 /4 /2 / $5.85 $.25 $.70 $8.5 $0.85 $.70 $ A SERIES C-CLAMPS SERIES 79: carriage c-clamps High tensile ductile alloy casting provides excellent strength in a cast clamp. The 540 series is ruggedly constructed with a hardened steel spindle. Our carriage clamp is recommended for any work load which does not require the additional depth or strength of Series 400 C- Clamps or 800 series C-Clamps / Throat - -7/8 2-/ 2- -/4-5/8-5/8 Spindle Diameter /2 /2 5/8 5/8 7/8 7/8 Min. Proof Test lbs Ship. case Qty. Ship. Wgt. lbs. Ea. -/4 -/2 2-/8 -/4 5-7/8 8-/2 540A-2 /2 540A- 540A-4 540A- 540A-8 540A-0 540A $0.00 $.70 $5.85 $20.00 $.70 $8.5 $4.70

14 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 C-CLAMPS SERIES 79: Forged, copper Spindle, High-Visibility c-clamps Regular Duty, Extra Deep Throat Improved frame design allows for a higher proof test, greater throat depth, and lower overall weight. 400CS series offers a drop forged frame c-clamp with an anti-spatter, copper plated spindle, swivel pad, and cross-pin handle. Therefore, a tool that offers more uses, is easier to handle and creates less fatigue. Spindle threads are Acme roll threaded to provide user with maximum strength and clamping force. Sliding pin handle with rounded, ergonomic ends Throat 2 2-/ /8 4-/2 5-/8 5- COPPER PLATED L-CLAMPS SERIES 79: L-Clamps fit a wide variety of applications. Perfect for jobs that require clamping wide or high parts, or where extreme throat depth is necessary. u.s. made replaceable Perma-Pads swivel to adapt to angular workpieces. u.s. made solid steel spindles are copper plated for anti-spatter resistance. u.s. made Wilton-Grip soft rubber handles, standard on all 00/400 series models, provide comfortable grip. Improved clamping speed by sliding along rail to work. use of L-Clamps expose less spindle screw and the clamp is less likely to twist and bend. One size L-Clamp can be used on multiple size (clamping) requirements. Spindle Diameter /2 5/8 7/8 7/8 Min. Proof Test lbs Ship. Wgt. lbs. Ea. -/2 -/4 2-/4 4-/4 8-/2 0-/2 4 H402CS H40CS H404CS H40CS H408CS H40CS H42CS $2.5 $5.0 $.55 $.40 $4.80 $4.5 $04.00 Nominal Throat Nominal Rail Size Nominal clamping Pressure/lbs. Nominal Spindle Diameter Ship. Wgt. lbs. Each Light Duty copper Plated L-clamp with Wilton-Grip Handles / /8 x 5/ x /8 7/8 x 7/ x 5/2 x 5/2 x 5/2 x 5/2 -/ x /2 -/ x /2 -/ x / /2 5/8 5/8 2 -/4 5 5-/2 5-/4 -/2 7-/4 9 0-/2 0B STG 08B STG 0B STG 2B STG B STG 20B STG 24B STG 2B STG 40B STG 48B STG $.20 $52.00 $0.70 $5.90 $72.80 $78.00 $8.70 $2.70 $2.5 $5.00 Regular Duty copper Plated L-clamp with Wilton-Grip Handles / x 9/ -/ x 9/ -/ x 9/ -/ x 9/ -/ x 9/ -/ x 9/ / / / / / / -/2 7-/4 7-/2 8-/4 0-/4 -/4 40B STG 42B STG 4B STG 420B STG 42B STG 440B STG $2.70 $2.5 $8.70 $47.5 $82.00 $0.70 Heavy Duty copper Plated L-clamps / x /4-9/ x /4-9/ x /4-9/ x /4-9/ x /4-9/ x /4-9/ x / /8 7/8 7/8 7/8 7/8 7/8 7/8 2 -/4 4-/2 5-/2 7-/4 20 -/2 52B 5B 520B 524B 52B 540B 548B $5.90 $2.50 $5.5 $24.00 $20.00 $277.5 $

15 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 ECONOMY SERIES L-CLAMPS SERIES 79: Versatile, economy series L-Clamps are designed for economical repetitive clamping. Economy series offers generous throat depth, substantial clamping pressure with a competitive price. Swivel pads are cold pressed on to provide secure clamping. Black oxide spindle acts as a rust inhibiter. Nominal Throat Nominal Rail Size 7/8 x 7/ 7/8 x 7/ -/ x 9/ -/ x 9/ -/ x 9/ -/ x 9/ -/ x 9/ FLOAT LOCK VISE FOR DRILL PRESSES SERIES 40: Nominal clamping Pressure/lbs Nominal Spindle Diameter Economy L-clamps /2 5/8 5/8 Ship. Wgt. lbs. Each FLOAT LOCK VISE FOR BAND SAWS SERIES 40: $9.90 $45.0 $2.40 $7.0 $8.70 $04.00 $2.70 Easy to mount in minutes. Expand the of your machines - boost production in a variety of setups. Work is tightly locked, or completely released by a quick turn of the hinged handle which operates the vise jaw. Vise turns on three sides, which permits drilling many holes without removing work. The T bolt mounting clamp locks the vise securely at any position on the table, making it a dependable drill jig when large quantities of the same part are to be drilled. The mounting clamp also allows the vise to swing to the edge of the table for clamping long parts. When the vise is not in use the mounting clamp can quickly swing the vise completely off the table and out of the way eliminating the time consuming need of removal and storage. Vises come complete with removable jaw pads and mounting clamp. pads feature Horizontal and Vertical V grooves that align and grip rounds securely. Parallel grooves make for easy alignment of jigs and fixtures. Description Float Lock Safety Vise for Drill Presses with 9 and Thumb Release Float Lock Safety Vise for Drill Presses with 2 and Thumb Release Optional Mounting Bracket for Drill Presses $77.40 $87.0 $8.0 Ideal for fast setups on production pieces. With Float-Lock Band Saw Vise, you cut accurately and safely all shapes and thicknesses of material; maximum 0. Wide angle control (like steering a motorcycle) makes intricate sawing easy. Grip or release work with simple twist of handles. Handles never need to touch the work, assuring safety. Vise also reduces blade damage. For hard-to-hold pieces, vertical cutting, automatic chain feed operation, irregular shapes and compound angle cutting. Allows intricate cutting while safely keeping hands away from the material. Removable jaw pads feature Horizontal and Vertical V: grooves that align and grip rounds securely. Parallel grooves make for easy alignment of parts. Description Float Lock Safety Vise for Band Saws with See our Machinery Section for Drill Presses and Band Saws. $

16 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 HOLD-DOWN ACTION CLAMPS (VERTICAL HANDLE) u u 207-S 207-u 207-uL 20-S 20-u 247-u Holding 00 lbs. 200 lbs. 200 lbs. 475 lbs. 75 lbs. 50 lbs. 750 lbs. 00 lbs. 000 lbs. TOGGLE CLAMPS SERIES : Weight 0.5 lbs. 0. lbs. 0.5 lbs. 0.9 lbs. 0.7 lbs lbs.. lbs.. lbs. 2. lbs. 207-S Handle Moves Bar Opens S Height Under Bar Spindle assembly must be ordered separately on Nos. 207 & 20. HOLD-DOWN ACTION CLAMPS (HORIzONTAL HANDLE) $0.77 $.0 $.0 $4.75 $4.75 $5.0 $24.05 $2.54 $ U 2-U 5-U 25-U Holding Weight Handle Moves Bar Opens Height Under Bar Please inquire for more dimensional information, line drawings, etc. 2-u 27-u 7-u 27-u 25-u 5-u 25-u 50 lbs. 200 lbs. 500 lbs. 750 lbs. 200 lbs. 500 lbs. 750 lbs 0.7 lbs lbs. 0.8 lbs..0 lbs. 0.2 lbs lbs..47 lbs $0.82 $4.00 $5.44 $2.0 $.2 $2.82 $2.9 SqUEEzE ACTION CLAMPS * Holding 200 lbs. 50 lbs. 700 lbs. * Trigger Release Weight 0. lbs. 0. lbs.. lbs $. $2.4 $.9 FLAT-TIP BONDED NEOPRENE CAP SPINDLE ASSEMBLIES Overall Length Dia of Tip Thread (G) 0-2 /4-20 /4-20 5/-8 5/-8 /8- /8- /8- /2-5/ /4-20 /4-20 cone-tip Spindle Assemblies available. See our website or inquire. EDP $.52 $.82 $2.5 $2.5 $2.8 $2.85 $.5 $.8 $4. $5.08 $.72 $.82 $.9 $.9 577

17 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 TOGGLE CLAMPS SERIES : PULL ACTION CLAMPS (VERTICAL HANDLE) Holding 500 lbs. 000 lbs lbs. Weight 0.25 lbs. 0.0 lbs..50 lbs. Drawing Movement Hook Adjustment PULL ACTION CLAMPS (HORIzONTAL HANDLE) 2 Holding Weight Drawing Movement 5 Hook Adjustment $7.95 $.88 $ While we show the most popular items, we can supply their entire range of products * 85* 0 lbs. 700 lbs lbs. 75 lbs. 750 lbs. 000 lbs lbs lbs. 0.5 lbs. 0.5 lbs..4 lbs. 0. lbs..5 lbs. 2.5 lbs lbs..2 lbs *Latch plate must be ordered separately $.95 $5.9 $24.77 $2.5 $.5 $.80 $55.75 $72.7 including metric models. See our website or inquire. STRAIGHT-LINE ACTION CLAMPS Holding Weight Plunger Travel Plunger Thread Plunger Height lbs. 200 lbs. 00 lbs. 700 lbs. 00 lbs. 00 lbs. 800 lbs. 850 lbs lbs lbs. 000 lbs lbs lbs lbs.. lbs. 0.8 lbs. 0.9 lbs.. lbs..25 lbs..90 lbs..7 lbs lbs /4-20 5/-8 /8-5/-8 5/-8 5/-8 /8- /8- /2-5/ $.0 $5.0 $7.45 $.72 $20.8 $.4 $.9 $. $9.04 $07. $24.9

18 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 HORIzONTAL HANDLE TOGGLE CLAMPS SERIES 2: Holding Capacity: 0 lbs. Handle Moves 80, Bar 90 Holding Capacity: 200 lbs. Handle Moves 0, Bar 85 Holding Capacity: 500 lbs. Handle Moves 5, Bar $0.05 $9.5 $9.0 Holding Capacity: 750 lbs. Handle Moves 50, Bar $4.5 Description A B C D E F G H I J K L M N O Capacity Weight 500 u-bar, Flanged Base In lbs.5oz mm kg 4gr 50 u-bar, Flanged Base In lbs 4.oz mm kg gr 520 u-bar, Flanged Base In lbs 9.4oz mm kg 25gr 50 u-bar, Flanged Base In lbs.oz mm kg 40gr VERTICAL HANDLE TOGGLE CLAMPS SERIES 2: Holding Capacity: 00 lbs. Handle Moves 5, Bar $0.40 Holding Capacity: 200 lbs. Handle Moves 0, Bar $9.5 Holding Capacity: 500 lbs. Handle Moves 0, Bar 00 Holding Capacity: 750 lbs. Handle Moves 58, Bar 05 Holding Capacity: 000 lbs. Handle Moves 70 *, Bar 5 * $0.00 $24.40 $.70 Description A B C D E F G H I J K L M N O Capacity Weight u-bar, Flanged Base, In lb 2.4oz Straight Handle mm kg 8gr Fixed Spindle, Flanged In lb 5.oz Base, Straight Handle mm kg 45gr Short u-bar, Flanged In lbs.7oz Base, Straight Handle mm kg 2gr 9500 u-bar, Flanged Base, In lbs.95oz Straight Handle mm kg 7gr u-bar, Flanged Base, In lbs.2oz Straight Handle mm kg 45gr *Without Roll Pin. With Roll Pin - Handle Move 58, Bar

19 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 PUSH / PULL TOGGLE CLAMPS SERIES 2: Holding Capacity: 00 lbs. Plunger Travel: -/4 in. (2mm) Holding Capacity: 800 lbs. Plunger Travel: -5/8 in. (4.mm) Holding Capacity: 2500 lbs. Plunger Travel:. in. (4.mm) Holding Capacity: 00 lbs. Plunger Travel: -/2 in. (8mm) Holding Capacity: 700 lbs. Plunger Travel: 2-/2 in. (.8mm) $.90 $2.25 $9.25 $2.05 $7.5 Holding Capacity: 75 lbs. Holding Capacity: 0 lbs. Holding Capacity: 700 lbs. Holding Capacity: 2000 lbs $.70 $2.75 $8.75 $7.70 Description A B C D E F G H I J K L M N O Capacity Weight 950 Push/Pull In / lbs 0.5oz Internal Threads mm kg 00gr 520 Push/Pull In / lbs 28oz Internal Threads mm kg 800gr 520 Push/Pull In / lbs.0oz Internal Threads mm kg 95gr 520 Plunger Clamp In / / lbs 9.5oz w/ Threaded Collar mm kg 270gr 5202 Plunger Clamp In / lbs 24.oz w/ Threaded Collar mm kg 90gr 9950 Latch Type, Flanged In lbs 9.5oz Base, Straight Handle mm kg 270gr 50 Latch, Flanged Base, In lbs.5oz Straight Handle mm kg 42gr Latch, Flanged Base, In / lbs 7.0oz T-Handle mm kg gr 580 Latch, Flanged Base, In / lbs 24oz T-Handle mm kg 80gr FLAT cushion-tip BONDED SPINDLE ASSEMBLIES Part Description 9550 FC x / FC-44 /4-20 x / FC-428 /4-20 x 2 /8 550 FC-5 5/-8 x 2 /2 555 FC-500 5/-8 x 5540 FC-82 /8- x / FC-842 /8- x 4 / FC-24 /2- x /4 $.80 $2.0 $.0 $2.0 $2.0 $2.0 $2.50 $4.70 FLANGED WASHERS FOR U BAR clamps ONLy Part Description FW-080 For 8 Spindle $ FW-00 For 0 Spindle $ FW-40 For /4 Spindle $ FW-5 For 5/ Spindle $ FW-80 For /8 Spindle $ FW-20 For /2 Spindle $ FW-580 For 5/8 Spindle $.40 cone cushion-tip BONDED SPINDLE ASSEMBLIES Part Description CC x /8 $ CC-44 /4-20 x /4 $ CC-428 /4-20 x 2 /8 $ CC-5 5/-8 x 2 /2 $ CC-82 /8- x /2 $ NEOPRENE caps Slip on Standard Adjustable Spindle Heads Part Description 5520 NC-40 For /4 Spindle 550 NC-5 For 5/ Spindle 5540 NC-80 For /8 Spindle 5550 NC-20 For /2 Spindle $.40 $.40 $.40 $.40

20 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 CLAMPING KITS SERIES 4: 52 pc. set in fitted rack suitable for hanging 50 pc. set with fitted wooden container INcLUDES 24 Studs (4 each:, 4, 5,, 7, 8 ) 4 Coupling nuts Flange nuts (4 in wooden set) T-Slot nuts Step clamps Pair Step blocks ( wide) Stud Table Size Slot In Wood In Steel PageNo 7/ CS002 /8- / PageNo 9/ PageNo 9/ CM002 /2-* 5/ PageNo / PageNo / CL002 5/8- / PageNo / PageNo / CEL02 /4-0 7/ PageNo *For Bridgeport and similar machines. The Choice Is Yours!!! T-SLOT BOLTS SERIES 7: $55.50 $55.50 $55.50 $0.5 $55.40 $0.5 $75.70 $75.70 $75.70 $2.5 $2.5 $2.5 quality Clamping Kits T-NUT AND STUD SETS SERIES 48: 8 pc. set in fitted rack suitable for hanging 8 pc. set with fitted wooden container. INcLUDES 24 studs (4 each:,4,5,,7,8 ) 4 Coupling nuts 4 Flange nuts T-Slot nuts METRIC CLAMPING KITS - 58 PC. SERIES 4: Table Slot M0 M2 M4 M5.7 M M8 M20 M Stud Table Size Slot In Wood In Steel PageNo 7/ TS002 /8- / PageNo 9/ PageNo 9/ TM002 /2-* 5/ PageNo / PageNo / TL002 5/8- / PageNo / PageNo / TEL02 /4-0 7/ PageNo *For Bridgeport and similar machines. Stud Size M8-.25 M0-.25 M2-.75 M4-2.0 M-2.0 M8-2.5 M * 40020* $78.5 $78.5 $8.90 $8.90 $9.00 $00.25 $.0 $25.75 T-SLOT NUTS SERIES 74: Case Hardened Steel Black Oxide Finish $0.70 $28.05 $0.70 $4.0 $9.50 $4.0 $45.45 $4.70 $45.45 $07.05 $84.20 $0.95 M0 through M8 sets include a fitted rack suitable for hanging. * Packed with wooden container. Forged from selected steel. Cannot twist or jam in slots. National Coarse cut threads. Length Under Head /8- /2-5/8- /4-0 -/ $ $.0 70 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $.5 $.50 $.90 $7.5 $8.5 $9.50 Table Thread Slot. Size 7/ /2 / / / /8 / PageNo PageNo /4 5/ PageNo PageNo /8 / $.5 $.5 $.40 $.40 $.50 $.75 $.85 $2.00 $2.90 $.5 $.40 $.70 58

21 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 COUPLING NUTS SERIES 74: STEP BLOCKS ( WIDE) SERIES 74: Case Hardened Steel Black Oxide Finish Couple any number of studs together to make a stud of any desired length. Thread Size CN8 / CN2 / CN58 5/ CN4 / STEP CLAMPS SERIES 74: $2.0 $2.25 $2.85 $4.5 Case Hardened Steel Black Oxide Finish One step block consists of 2 pieces. Height Range /4 - -5/ /8-2-/ / HEAVY DUTY HEx NUTS SERIES 74: $.40 $4.90 $2.25 Case Hardened Steel Black Oxide Finish Teeth will match any step block. Stud Overall Size Lgth SC825 5/,/8 2-/ SC84 5/,/ SC8 5/,/ SC5 /2 2-/2 74 SC24 / SC2 /2 742 SC5825 5/8 2-/ SC584 5/ SC58 5/ SC44 / SC4 / SC48 / $7.05 $9.90 $2.0 $7.80 $.05 $.25 $0.45 $.5 $.75 $4.80 $2.20 $2.85 Case Hardened Steel Black Oxide Finish Hex Thread Size Size HN4 /2 / HN5 9/ 5/ HN8 / / HN2 7/8 / HN58 -/ 5/ HN4 -/4 / HN78-7/ 7/ HN0-5/ $0.50 $0.0 $0.0 $0.75 $0.95 $.50 $2.90 $.00 FLANGE NUTS SERIES 74: CLAMPING STUDS SERIES 74: Case Hardened Steel Black Oxide Finish Thread Size FN8 / FN2 / FN58 5/ FN4 / $.50 $.75 $2.25 $.0 Case Hardened Steel Black Oxide Finish Overall /8- /2-5/8- /4-0 Lgth $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $2.25 $2.25 $2.55 $2.85 $.5 $.0

22 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 MACHINE STRAP CLAMPS SERIES 7: PLAIN CLAMPS SERIES 74: Drop Forged Steel Ideal for holding down all types of work on every type of machine. Proper strength and stiffness to handle all types of clamping jobs. U CLAMPS Overall Width Lgth Width Thickness of Slot 4 -/4 /4 / /8 / /8 -/8 / /4 -/4 5/ /4 -/8 -/ 7002 GOOSE NECK CLAMPS Overall Width Lgth Width Thickness of Slot 4 -/8 /4 / /4 7/8 / /8 -/8 / 7008 $4.00 $.85 $0.75 $7.20 $2.50 $4.25 $7.90 $.5 Case Hardened Steel Black Oxide Finish Stud Overall Size Lgth 5/, /8 2-/ /, / /, / /2 2-/2 74 / / /8 2-/ / / / / / T-SLOT CLEANER SERIES 74: Black Oxide Finish $.45 $8.70 $.0 $7.25 $0.00 $2.5 $9.05 $.05 $4.0 $.40 $.70 $.75 PLAIN CLAMPS $0.75 Overall Width Lgth Width Thickness of Slot T-SLOT BRUSH An easy way to clean chips from T-Slot tables. 4-5/8 /4 / /4 7/8 / /8 -/8 / $4.00 $.80 $0.75 FINGER CLAMPS $.0 Overall Thick- Width Lgth Width ness of Slot 4 -/8 /4 / /4 7/8 / /8 -/8 / 7008 $4.00 $.85 $0.75 quality Clamping Tools The Choice Is Yours!!! 58

23 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 SUPER CLAMP KITS Kit contains: Step Block and Clamp Kit which includes: Step Blocks Serrated End Clamps T-Nut and Stud Kit which includes: 4 Coupling Nuts 4 Flange Nuts 4 T-Slot Nuts T-Slot Cleaner 24 studs - 4 each of English Kits -, 4, 5,, 7 and 8 long Metric Kits CLAMPING & SET-UP COMPONENTS SERIES 80: 80: 80, 0,25,50,75, & 200mm long. Nos & 80-2: 80, 0, 40, 50, 75 & 200mm long. Nos & 8-5: 80, 0, 50, 75, 200, & 250mm long Holder (wooden base and metal tray). *Holders are all wooden. Bridgeport type milling machines use Part Nos. 2020, 20. Step Blk. PageNo T-Slut & clamp T-Slot Stud & Stud Kit Size Size Kit PageNo $ /8 5/ PageNo $ / / $ /2 /8-200 PageNo $ / / $ / / $ /8 / $ / / $ / 5/ $ /4 5/ $ / 5/ $ / / $ /8 / $ / / $ / 5/ $ /4 5/ $ / 5/ $ / / $ /8 / $ / $ / / With 2 Thick Step Blocks * $ / *20 $ / $82.0 $ $ $.45 $7.50 $9.85 $275.5 $27.75 $4.40 $5.5 $.70 $5.75 $59.05 $ With Thick Step Blocks With -/2 Thick Step Blocks With 25mm Thick Step Blocks 200M 200M 200M 2002M 2002M 2002M 200M 200M 0mm 2mm 4mm 4mm mm 7mm 8mm 20mm With 8mm Thick Step Blocks 2004M 4mm 2004M mm 2004M 7mm 2005M 8mm 2005M 20mm 200M mm M8 x.25 M0 x.5 M0 x.5 M x 2.0 M x 2.0 M x 2.0 M x 2.0 M20 x MACHINIST CLAMP KITS Kit contains: 4 Coupling Nuts Flange Nuts T-Slot Nuts T-Slot Cleaner 24 Studs - 4 Each of : English Kits -, 4, 5,, 7 and 8 long. Metric Kits - 80mm, 0mm, 25mm, 50mm, 75mm and 200mm long Step Block and Clamp Kit which includes: Step Blocks, Serrated End Clamps, Metal Holder Bridgeport type milling machines use Part or Part PageNo Step Block PageNo T-Slot Stud & clamp T-Slot Size Size Kit Nut P ageno $2.5 7/ / P ageno $ /2 / P ageno $2.5 9/ / P ageno $ / / P ageno $2.40 5/8 / * $08.5 5/8 / P ageno $ / / P ageno $2.5 5/8 / P ageno $ / 5/ P ageno $27.5 /4 5/ P ageno $282.5 / 5/ STEP BLOCK KITS Kit contains: 0 Steel Step Blocks Holder See page 590 for dimensional data. Blocks work in conjunction with Serrated End Clamps. Two halves = One Block. INcH With 25mm Thick Step Blocks 2mm 4mm 4mm mm 7mm 8mm 20mm M0 x.5 M0 x.5 M x 2.0 M x M 200M 2002M 2002M 2002M 200M 200M PageNo 4 Each 4 Each 2 Each 2080 $ $ $ METRIc M M M $0.70 $4.5 $248.5 $249.5 $ $0.75 $20.5 * In Plastic Holder $78.70 $.20 $8.40 With Thick Step Blocks 4 Each 4002M 4005M 4008M 4 Each 400M 400M 4009M 2 Each 4004M 4007M 400M

24 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 CLAMPING & SET-UP COMPONENTS SERIES 80: T-NUT & STUD KITS Kit contains: 4 Coupling Nuts, 4 Flange Nuts, 4 T-Slot Nuts, T-Slot Cleaner, 24 Studs - 4 ea. of English Kits:, 4, 5,, 7 and 8 long Metric Kits: Kit 820-0: 80mm, 0mm, 40mm, 50mm, 75mm and 200mm long. Kit : 80mm, 0mm, 50mm, 75mm, 200mm, and 250mm long Holder (wooden base and metal tray). Bridgeport type milling machines use Part 200. Inch Table T-Slot T-Slot Stud Nut Size Size 200 $ /8 5/ $ / /8-200 $ /2 / $ / / $ / /2- Metric 200 $ /8 / $ / / $ / 5/ $ /4 5/8-200 $ / 5/ $ / / $ /8 / $ / $ / / $ / $ / 7/ $ /8 7/ $ / STEP BLOCK & CLAMP KITS Kit Contains: Steel Step Blocks, Serrated End Clamps, Holder $8.00 $9.75 $9.05 $8.85 $20.05 $.45 $4.40 $49.80 $4.40 T-Slot Nut Table T-Slot Size 0mm 2mm 4mm 4mm mm 7mm 8mm 20mm mm Stud Size M8 x.25 M0 x.5 M0 x.5 M x 2.0 M x 2.0 M20 x 2.5 STEP BLOCKS Larger sizes have chamfered holes for ease of use. Blocks work in conjunction with Serrated End Clamps. Two halves = One Block. * Indicates chamfered hole Height Adj. Range A B Thick Step Blocks $4.5 /4 to-5/8 -/ / 400 $.0 -/8 to 2-/2-9/4 -/ 4004* $ /2 to -/4 2-5/2 -/2 Thick Step Blocks $.40 -/4 to 4 2-7/2-4/4 400* $.0 2-/2 to -/4 2-5/2 4007* $40.5 -/2 to 9 5-2/4-7/ 2 Thick Step Blocks 4008 $8.90 -/4 to 4 2-7/2-4/4 4009* $ /2 to -/4 2-5/2 400* $ /2 to 9 5-2/4-7/ $4.5 $.0 $5.90 $.40 $.0 $40.5 $8.90 $28.70 $ mm Thick Step Blocks mm to 4mm mm to 4mm 4mm to 52mm -/4 -/ -9/4 8mm Thick Step Blocks 45mm to 02mm 4mm to 52mm 89mm to 9mm 2-7/2 -/4 5-2/4 5mm Thick Step Blocks 45mm to 02mm 4mm to 52mm 89mm to 9mm 2-7/2 -/4 5-2/4 Horizontal Vertical / -/ 2-5/2-4/4 2-5/2-7/ -4/4 2-5/2-7/ Inch Step Serrated Blocks Stud End clamps 2 Each Size 2 Each With Thick Step Blocks / 050 PageNo $ or /8 050 PageNo 0504 PageNo $ / PageNo 050 PageNo 0507 PageNo $ / PageNo 0509 With -/2 Thick Step Blocks PageNo 0504 PageNo $ / PageNo 050 PageNo 0507 PageNo $ / PageNo 0509 PageNo 050 PageNo $ /4 05 PageNo 052 With 2 Thick Step Blocks /8 05 PageNo $ or *Kit furnished with flat board holder Metric Step Blocks 2 Each Stud Size Serrated End clamps 2 Each With 25mm Thick Step Blocks 4002M 400M 4004M 4002M 400M 4004M 4002M 400M 4004M 4005M 400M 4007M 4005M 400M 4007M 4005M 400M 4007M M0 x.5 M x 2.0 M20 x M 0502M 050M 0504M 0505M 050M 0507M M x M 0509M With 8mm Thick Step Blocks 0504M 0505M 050M 0507M 0508M 0509M 050M 05M 052M $.25 $42.70 $5.25 $9.70 $24.5 $

25 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 DRIVER STUDS (INCH) Black Oxide Finish Tensile Strength: 25,000 p.s.i. min. Medium Carbon Steel Most studs have wrench flats Special lengths and sizes will be quoted upon request Thread A B c Flats 400 $.40 /4-20 -/2 /2 NO 4002 $.40 / /4 NO 400 $.40 / /2 NO 4004 $.40 /4-20 NO 4005 $.45 /4-20 -/2 NO 400 $.50 / NO 4007 $.50 / /2 NO 4008 $.50 / NO 4009 $.50 / /2 NO 400 $.55 /4-20 NO 40 $.55 /4-20 -/2 NO 402 $.55 / NO 40 $.55 / /2 NO 404 $.55 / NO 4040 $.0 5/-8 -/2 /2 NO $.0 5/-8 2 /4 NO PageNo $.0 5/-8 2-/2 NO $.70 5/-8 -/8 NO $.70 5/-8 -/2 -/8 NO 4040 $.75 5/-8 4 -/8 NO $.75 5/-8 4-/2 -/8 NO $.80 5/-8 5 -/8 NO $.80 5/-8 5-/2 -/8 NO 4040 $.80 5/-8 -/8 NO 404 $.85 5/-8 -/2 -/8 NO 4042 $.90 5/-8 7 -/8 NO 404 $.95 5/-8 7-/2 -/8 NO 4044 $.95 5/-8 8 -/8 NO 4050 $.40 /8- -/2 /2 NO $.5 /8-2 /4 NO 4050 $.5 /8-2-/2 NO $.5 /8- YES $.40 /8- -/2 -/4 YES 4050 $.40 /8-4 -/4 YES $.40 /8-4-/2 -/4 YES $.45 /8-5 -/4 YES $.50 /8-5-/2 -/4 YES 4050 $.50 /8- -/4 YES 405 $.55 /8- -/2 -/4 YES CLAMPING & SET-UP COMPONENTS SERIES 80: Thread A B c Flats 4052 $.55 /8-7 -/4 YES 405 $.55 /8-7-/2 -/4 YES 4054 $.0 /8-8 -/4 YES 400 $2.5 7/-4 -/2 /2 NO 4002 $2.0 7/-4 2 /4 NO 400 $2.20 7/-4 2-/2 NO 4004 $2.0 7/-4 YES 4005 $2.5 7/-4 -/2 -/4 YES 400 $2.40 7/-4 4 -/8 YES 4007 $2.40 7/-4 4-/2 -/8 YES 4008 $2.40 7/-4 5 -/8 YES 4009 $2.45 7/-4 5-/2 -/8 YES 400 $2.55 7/-4 -/8 YES 40 $2.0 7/-4 -/2 -/8 YES 402 $2.0 7/-4 7 -/8 YES 40 $2.5 7/-4 7-/2 -/8 YES 404 $2.5 7/-4 8 -/8 YES 4070 $.40 /2- -/2 /2 NO $.45 /2-2 /4 NO 4070 $.40 /2-2-/2 NO $.45 /2- YES $.55 /2- -/2 -/4 YES 4070 $.0 /2-4 -/2 YES $.0 /2-4-/2 -/2 YES $.5 /2-5 -/2 YES $.5 /2-5-/2 -/2 YES 4070 $.70 /2- -/2 YES 407 $.80 /2- -/2 -/2 YES 4072 $.85 /2-7 -/2 YES 407 $.90 /2-7-/2 -/2 YES 4074 $.95 /2-8 -/2 YES 4075 $.75 /2-9 -/2 YES 407 $4.25 /2-0 -/2 YES 4077 $5.5 /2-2 -/2 YES 4078 $5.70 /2-4 -/2 YES 407 $7.25 /2- -/2 YES 4080 $.90 5/8- -/2 /2 NO $.80 5/8-2 /4 NO 4080 $.80 5/8-2-/2 NO $.80 5/8- YES $.90 5/8- -/2 -/4 YES 4080 $.90 5/8-4 -/2 YES $2.05 5/8-4-/2 -/4 YES $2.5 5/8-5 -/4 YES $2.20 5/8-5-/2 -/4 YES 4080 $2.5 5/8- -/4 YES 408 $2.45 5/8- -/2 -/4 YES 4082 $2.0 5/8-7 -/4 YES 408 $2.75 5/8-7-/2 -/4 YES 4084 $2.75 5/8-8 -/4 YES 4085 $4.75 5/8-9 -/4 YES 408 $5.0 5/8-0 -/4 YES 4087 $5.85 5/8-2 -/4 YES 4088 $.80 5/8-4 -/4 YES 408 $7.75 5/8- -/4 YES $8.50 5/8-8 -/4 YES 4082 $9.0 5/8-20 -/4 YES 408 $0.95 5/8- -/4 YES 4082 $.80 5/8-24 -/4 YES Thread A B c Flats 4090 $2.20 /4-0 YES $2.40 /4-0 -/2 -/4 YES 4090 $2.55 / /2 YES $2.75 /4-0 4-/2 -/4 YES $2.80 / YES 4090 $.00 /4-0 5-/2 2 YES $.0 /4-0 2 YES $.0 /4-0 -/2 2 YES $.40 / YES 4090 $.0 /4-0 7-/2 2 YES 409 $.5 / YES 4092 $.0 / YES 409 $7.20 / YES 4094 $8.0 / YES 4095 $8.80 / YES 409 $9.5 /4-0 2 YES 4097 $0.5 / YES 4098 $.20 / YES 409 $2.45 /4-0 2 YES $.50 / YES 400 $4.90 7/8-9 YES 4002 $5.5 7/8-9 -/2 -/4 YES 400 $5.55 7/ /2 YES 4004 $5.95 7/8-9 4-/2 -/4 YES 4005 $.0 7/ YES 400 $.75 7/8-9 5-/2 2-/4 YES 4007 $.90 7/8-9 2-/4 YES 4008 $7.20 7/8-9 -/2 2-/4 YES 4009 $7.70 7/ /4 YES 400 $7.95 7/8-9 7-/2 2-/4 YES 40 $8.0 7/ /4 YES 402 $9.80 7/ /4 YES 40 $0.70 7/ /4 YES 404 $.50 7/ /4 YES 405 $2.50 7/ /4 YES 40 $.0 7/8-9 2-/4 YES 407 $4.70 7/ /4 YES 408 $5.75 7/ /4 YES 40 $7.5 7/8-9 2-/4 YES 4020 $ / /4 YES 40 $ YES 402 $.5-8 -/2 -/4 YES 40 $ /2 YES 404 $ /2 -/4 YES 405 $ YES 40 $ /2 2-/4 YES 407 $ /2 YES 408 $ /2 2-/2 YES 409 $ /2 YES 40 $ /2 2-/2 YES 4 $ /2 YES 42 $ /2 YES 4 $ /2 YES 44 $ /2 YES 45 $ /2 YES 4 $ /2 YES 47 $ /2 YES 48 $ /2 YES 4 $ /2 YES 420 $ /2 YES 58

26 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 DRIVER STUDS (METRIC) Thread A B c 020 M x $ M x $ M x $ M x $ M x.0 0 $ M x $ M x $ M x $.0 02 M x $ M8 x M8 x M8 x M8 x M8 x M8 x M8 x M8 x M8 x M0 x M0 x M0 x M0 x M0 x M0 x M0 x M0 x M0 x M0 x M x M x M x M x M x M x M x M x M x M20 x M20 x M20 x M20 x M20 x M20 x M20 x M20 x M20 x M24 x M24 x M24 x M24 x M24 x M24 x M24 x.0 00 CLAMPING & SET-UP COMPONENTS SERIES 80: $.90 $.95 $2.05 $2.5 $2.20 $2.50 $2.5 $2.75 $2.90 $.85 $.90 $.90 $.95 $.95 $2.20 $2.20 $2.0 $2.0 $2.40 $2.0 $2.0 $2.45 $2.0 $2.70 $2.75 $2.75 $.05 $.5 $.50 $2.80 $.00 $.5 $.50 $.0 $.75 $4.05 $5.5 $5.70 $.0 $.85 $4.25 $4.70 $5.20 $5.50 $5.95 $8.00 $8.20 $5.95 $.85 $7.0 $8.0 $8.0 $.5 $2.5 T-SLOT NUTS Black Oxide Finish Case Hardened 08 Material The last thread is incomplete on T-Slot Nuts to prevent the stud from turning through the bottom of the nut. Many sizes conform to TCMAI standards English* Metric** Thread Table Slot Table A B Slot c D E F 440 $2.5 /4-20 5/ 8 /4 / 9/ 9/ 4402 $2.70 /4-20 /8 0 /8 5/4 9/ 9/ 440 $2.20 5/-8 /8 0 /8 /4 5/8 7/8 44 $2.25 5/-8 7/ 2 /2 7/2 / 7/8 444 $2.25 5/-8 /2 /2 9/2 7/8 7/ $2.20 /8-7/ 2 /2 7/2 / 7/ $2.20 /8- /2 2 /2 9/2 7/8 7/8 440 $2.55 /8-9/ 5 5/8 /2 7/8 -/ $.05 7/-4 /2 /2 9/2 7/8 7/ $2.90 7/-4 /2 /8 7/2 /4 7/ $2.45 /2-9/ 5 5/8 /2 7/8 -/8 440 $2.75 /2-5/8 5/8 /2 -/8 44 $.70 /2-5/8 /4 /8 -/8 -/8 442 $.00 /2- / 8 /4 7/ -/8 -/4 44 $4.05 /2- /4 20 /4 5/2 -/4 -/4 445 $.5 5/8- / 8 /4 7/ -/8 -/4 44 $.0 5/8- /4 20 /4 5/2 -/4 -/4 447 $4.75 5/8- / 2 9/ -/4 -/2 448 $5.25 /4-0 / 2 9/ -/4 -/2 44 $5.70 /4-0 7/8 2 9/ -/2 -/ $.45 / /8-5/8 -/4 442 $9.5 / /2 /4 -/4 -/4 44 $7.55 /4-0 -/ 27 -/8 / -5/ $.85 7/ /8-5/8 -/ $9.00 7/8-9 -/ 27 -/8 / -5/ $.55 7/8-9 -/8 28 -/2 /4 -/ $.95 7/8-9 -5/ 4 -/4 5/ $ / 27 -/8 / -5/ $ /8 2 -/2 /4 -/ $ /4 2 -/4 7/ $ / 4 -/4 5/ $.0 -/4-7 -/8 -/4 -/8 2-/2 2-/2 Metric* English** Thread Table Slot Table A B Slot c D E F $.20 $.70 $.70 $.70 $4.5 $4.5 $4.5 $5.20 $5.20 $5.70 $.0 $9.20 $.45 M x.0 M x.0 M8 x.25 M0 x.5 M0 x.5 M x 2.0 M x 2.0 M20 x 2.5 M24 x.0 M24 x / 7/ 7/ /2 9/ 9/ 5/8 / /4 / 7/8 -/ -5/ * T- Slot Nuts are undersized to fit machine table slot. ** English T- Slot Nut will fit this size metric machine T-slot While we show only the most popular items we can supply their entire range of products; please inquire

27 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 FLANGE NUTS When used with Spherical Washers Flange Nuts will equalize thread loads Black Oxide Finish Case Hardened 2L4 Material Available in Coarse or Fine Threads Many sizes conform to TCMAI standards SPHERICAL FLANGE NUTS Black Oxide Finish Case Hardened 2L4 Material Many sizes conform to TCMAI standards When used with spherical washers flange nuts will equalize thread loads. 588 INcH CLAMPING & SET-UP COMPONENTS SERIES 80: Thread A B c D E 40 $.0 /4-20 5/8 5/ /2 /2 402 $.80 5/-8 /4 /8 /8 9/ 40 $.85 /8-7/8 /2 /8 / 404 $2.5 7/-4 9/ 5/2 /4 405 $2.5 /2- -/8 / / 7/8 40 $2.70 5/8- -/8 / / -/ 407 $4.00 /4-0 -5/8 /4 -/4 408 $5.45 7/8-9 -/4 -/8 /4-7/ 409 $ /4 /4-5/8 4 $.5 -/4-7 2-/2 -/4 /4 -/ 470 $.80 /4-28 5/8 5/ /2 / $.85 5/-24 /4 /8 /8 9/ 470 $.90 /8-24 7/8 /2 /8 / 4704 $2.20 7/-20 9/ 5/2 / $2.5 /2-20 -/8 / / 7/8 470 $2.80 5/8-8 -/8 / / -/ 4707 $4.00 /4- -5/8 /4 -/ $5.5 7/8-4 -/4 -/8 /4-7/ 4709 $ /4 /4-5/8 METRIc Thread A M x.0 M8 x.25 M0 x.5 M x 2.0 M20 x 2.5 M24 x.0 B c Thread A B c D E F PageNo $2.20 /4-20 5/8 5/ /2 /2 /4 PageNo $2.0 5/-8 /4 /8 /8 9/ -/4 PageNo $2.5 /8-7/8 /2 /8 / -/4 PageNo $2.0 7/-4 9/ 5/2 /4 -/2 PageNo $2.70 /2- -/8 / / 7/8 -/2 PageNo $.25 5/8- -/8 / / -/ -/4 PageNo $4.5 /4-0 -5/8 /4 -/4 2-/4 PageNo $.5 7/8-9 -/4 -/8 /4-7/ 2-/2 PageNo $ /4 /4-5/8 2-/4 PageNo $5.05 -/4-7 2-/2 -/4 /4 -/ D E $2.25 $2.0 $2.80 $.0 $.55 $4.90 $8.5 SERRATED END CLAMPS Stud Size A B c D E F PageNo $ /2 /2 / 5/ or /8 27/2 PageNo $ /8-7/ 5/ or /8 -/2 PageNo $5.20 -/8 /4 2-/ 5/ or /8-5/2 PageNo $ /2 -/8 /2 / /2 /2 PageNo $ /4 /4-5/ /2-5/2 PageNo $7.50 -/4 7/8 2-/ /2-9/2 PageNo $ /2 -/4 5/8 9/ 5/8 /2 PageNo $ /2 /4 -/ 5/8-9/2 PageNo $2.0 -/2 7/8-5/ 5/8 -/2 PageNo $.0 4 -/2 /4 -/ /4 -/2 PageNo $2.90 -/2-5/ /4-5/2 PageNo $ /4 -/8 2-/ /4 -/2 PageNo $ /4 -/ 7/8 or -27/2 054 $ /8-5/ 7/8 or 2-/2 PageNo $ /2 2-5/ 7/8 or 2-/ A B c Black Oxide Finish Case Hardened 7 Material Coupling Nuts can be used to join two or more studs for a desired length Many sizes conform to TCMAI standards D Stud Size E M-M8-M0 M-M8-M0 M-M8-M0 M2 M2 M2 M M M M20 M20 M20 M24 M24 M24 F COUPLING (ExTENSION) NUTS METRIc INcH $.45 $.45 $.5 $4.70 $.05 $8.5 $.45 $8.75 $2.5 $5.20 $0.20 $4.0 $7.50 $2.75 $7.0 $2.0 $.0 $2.90 $.40 $40.5 $50.20 $59.5 Thread A M x.00 M8 x.25 M0 x.5 M x 2.0 M20 x 2.5 M24 x.0 B Thread A B c c $.95 /4-20 /2 5/ $2.5 5/-8 9/ 7/8 450 $2.5 /8- / 4504 $2.70 7/-4 /4 -/ $2.80 /2-7/8 -/4 450 $4.0 5/8- -/ -5/ $5.70 /4-0 -/4-7/ $8.0 7/8-9 -7/ 2-/ $ /8 2-/2

28 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 HEAVY HEx NUTS TUGGER T-SLOT BOLTS Black Oxide Finish Medium Carbon Steel T-Slot Bolt head dimension D is undersized to fit machine table slot Thread Class 2A unc CLAMPING & SET-UP COMPONENTS SERIES 80: Black Oxide Finish Case Hardened High Grade Alloy Steel Will outlast ordinary Hex Nuts when used in repetitive operations Thread Wdth Acs Thick- Size Flats ness 420 $0.40 /4-20 /2 5/ $0.50 5/-8 9/ /4 420 $0.50 /8- / 2/ $0.80 7/-4 /4 27/ $0.5 /2-7/8 /4 420 $0.85 5/8- -/ 9/ $.25 /4-0 -/4 47/ $2.45 7/8-9 -7/ 55/ $ /8 /4 PageNo Table A B c D E F Slot 4520 $.50 /8- -/2 / / / / $.55 /8-2 -/2 / / / / $.75 /8-2-/2 2 / / / / $.85 /8-2 / / / / $4.0 /8- -/2 2 / / / /8 452 $4.20 /8-4 2 / / / /8 45 $4.5 /8-4-/2 2 / / / /8 452 $4.5 /8-5 2 / / / / $4.75 /8-5-/2 2 / / / / $4.85 /8-2 / / / /8 452 $5.20 /8-7 2 / / / / $5.45 /8-8 2 / / / / $4.70 /2- -/2 /4 7/8 -/ / $4.85 /2-2 -/2 /4 7/8 -/ / $5.05 /2-2-/2 2 /4 7/8 -/ / $5.0 /2-2 /4 7/8 -/ / $5.5 /2- -/2 2 /4 7/8 -/ / $5.80 /2-4 2 /4 7/8 -/ /2 454 $5.90 /2-4-/2 2 /4 7/8 -/ / $.05 /2-5 2 /4 7/8 -/ /2 454 $.25 /2-5-/2 2 /4 7/8 -/ / $.45 /2-2 /4 7/8 -/ / $.0 /2-7 2 /4 7/8 -/ /2 454 $.90 /2-8 2 /4 7/8 -/ / $7.55 /2-9 2 /4 7/8 -/ / $8.25 /2-0 2 /4 7/8 -/ /2 454 $8.95 /2-2 2 /4 7/8 -/ / $5.40 5/8- -/2 /2 -/8-5/ 5/ $5.70 5/8-2 -/2 /2 -/8-5/ 5/ $5.85 5/8-2-/2 2 /2 -/8-5/ 5/ $.5 5/8-2 /2 -/8-5/ 5/ $.5 5/8- -/2 2 /2 -/8-5/ 5/ $.70 5/8-4 2 /2 -/8-5/ 5/ $.80 5/8-4-/2 2 /2 -/8-5/ 5/ $7.00 5/8-5 2 /2 -/8-5/ 5/8 455 $7.25 5/8-5-/2 2 /2 -/8-5/ 5/ $7.80 5/8-2 /2 -/8-5/ 5/8 455 $8.25 5/8-7 2 /2 -/8-5/ 5/ $8.80 5/8-8 2 /2 -/8-5/ 5/ $9.0 5/8-9 2 /2 -/8-5/ 5/8 455 $0.5 5/8-0 2 /2 -/8-5/ 5/ $.00 5/8-2 2 /2 -/8-5/ 5/8 450 $7.55 / /2 5/2 -/4-9/ / $7.75 /4-0 2-/2 2 5/2 -/4-9/ /4 450 $8.05 / /2 -/4-9/ / $8.40 /4-0 -/2 2 5/2 -/4-9/ / $8.70 / /2 -/4-9/ /4 450 $8.95 /4-0 4-/2 2 5/2 -/4-9/ /4 HEAVY HEx JAM NUTS Black Oxide Finish Case Hardened High Grade Alloy Steel Will outlast ordinary Hex Jam Nuts when used in repetitive operations Thread Wdth Acs Thick- Size Flats ness 40 $0.25 /4-20 /2 /4 402 $0.0 5/-8 9/ /4 40 $0.5 /8- / 5/4 404 $0.50 7/-4 /4 7/4 405 $0.55 /2-7/8 / $0.0 5/8- -/ 2/4 407 $0.95 /4-0 -/4 27/ $.85 7/8-9 -7/ /4 409 $ /8 5/4 T-SLOT CLEANER 9500 T-Slot Cleaner allows for easy removal of chips from the machine table T-Slot Cleaners are made of steel for durability $0.85 TUGGER T-SLOT BOLTS (continued) PageNo PageNo Table No. A B c D E F Slot 4507 $9.45 / /2 -/4-9/ / $9.85 /4-0 5-/2 2 5/2 -/4-9/ / $0.40 / /2 -/4-9/ /4 450 $0.90 / /2 -/4-9/ /4 45 $2.05 / /2 -/4-9/ /4 452 $2.85 / /2 -/4-9/ /4 45 $.50 / /2 -/4-9/ /4 454 $4.40 / /2 -/4-9/ / $4.40 7/ / -/2 -/4 7/ $5.40 7/ / -/2 -/4 7/ $.40 7/ / -/2 -/4 7/ $7.0 7/ / -/2 -/4 7/ $8.0 7/ / -/2 -/4 7/ $.0 7/ / -/2 -/4 7/ $ / / -/2 -/4 7/ $2.80 7/ / -/2 -/4 7/ $.90 7/ / -/2 -/4 7/ $2.85 7/ / -/2 -/4 7/8 457 $ / / -/2 -/4 7/ $2.00 7/ / -/2 -/4 7/ $ / -/4 2-/ $ / -/4 2-/ 4580 $ / -/4 2-/ $ / -/4 2-/ $ / -/4 2-/ 4580 $ / -/4 2-/ $ / -/4 2-/ $ / -/4 2-/ $ / -/4 2-/ 4580 $ / -/4 2-/ 458 $ / -/4 2-/ 4582 $ / -/4 2-/ 589

29 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 HARDENED FLAT WASHERS Black Oxide Finish Case Hardened C00 Material Many sizes conform to TCMAI standards INcH Stud Size CLAMPING & SET-UP COMPONENTS SERIES 80: A B c 4200 $0.40 / /4 /2 /2 420 $0.40 /4 9/2 5/8 / $0.45 5/ /2 /4 /8 420 $0.45 /8 /2 7/8 / $0.55 7/ 5/2 / $0.55 /2 7/2 -/8 /8 420 $0.70 5/8 2/2 -/8 / $0.90 /4 25/2-5/8 5/ $.25 7/8 /2 -/4 5/ $.70 -/2 2 / 420 $.0 -/8-5/2 2-/4 7/2 42 $.0 -/4-9/2 2-/2 9/2 4 $0.0 #4 /8 5/ 5/4 42 $0.5 # 5/2 /8 5/4 424 $0.40 #8 / 7/ 5/4 METRIc Stud Size M M8 M0 M2 M M20 M24 A B c 5 4 HEAVY DUTY HARDENED FLAT WASHERS Black Oxide Finish Case Hardened C00 Material INcH $0.40 $0.45 $0.45 $0.0 $0.70 $.0 $.75 Stud Size A B c 42 $0.90 /4 9/2 5/8 / 40 $.00 5/ /2 /4 / 4 $.05 /8 /2 7/8 / 4 $.5 /2 7/2 -/8 / 44 $.25 5/8 2/2 -/8 / 45 $.55 /4 25/2-5/8 /4 4 $2.05 7/8 /2 -/4 /4 47 $2.70 -/2 2 9/2 TUGGER T-BOLTS Black Oxide Finish Medium Carbon Steel Heat Treated Thread class 2A unc PageNo Table A B c D E Slot PageNo $5.20 /8- -/2 /4 / /8 PageNo $5.25 /8-2 -/2 /4 / /8 PageNo $5.40 /8-2-/2 2 /4 / /8 PageNo $5.55 /8-2 /4 / /8 PageNo $5.0 /8- -/2 2 /4 / /8 PageNo $5.80 /8-4 2 /4 / /8 PageNo $5.95 /8-5 2 /4 / /8 PageNo $.05 /8-2 /4 / /8 PageNo $.5 /8-7 2 /4 / /8 PageNo $.50 /8-8 2 /4 / /8 PageNo $5.40 /2- -/2 5/ 7/8 /2 PageNo $5.45 /2-2 -/2 5/ 7/8 /2 PageNo $5.80 /2-2-/2 2 5/ 7/8 /2 PageNo $5.85 /2-2 5/ 7/8 /2 PageNo $5.90 /2- -/2 2 5/ 7/8 /2 PageNo $.5 / / 7/8 /2 PageNo $.70 / / 7/8 /2 PageNo $7.00 /2-2 5/ 7/8 /2 PageNo $8.0 / / 7/8 /2 PageNo $8.95 / / 7/8 /2 PageNo $9.45 / / 7/8 /2 PageNo $0.45 / / 7/8 /2 PageNo $.5 5/8- -/2 /2 -/8 5/8 PageNo $.45 5/8-2 -/2 /2 -/8 5/8 PageNo $7.00 5/8-2-/2 2 /2 -/8 5/8 PageNo $7.0 5/8-2 /2 -/8 5/8 PageNo $7.5 5/8- -/2 2 /2 -/8 5/8 PageNo $7.75 5/8-4 2 /2 -/8 5/8 PageNo $8.5 5/8-5 2 /2 -/8 5/8 PageNo $8.75 5/8-2 /2 -/8 5/8 PageNo $0.0 5/8-7 2 /2 -/8 5/8 PageNo $0.50 5/8-8 2 /2 -/8 5/8 PageNo $.90 5/8-0 2 /2 -/8 5/8 PageNo $.0 5/8-2 2 /2 -/8 5/8 PageNo $8.80 / /2-5/ /4 PageNo $9.25 /4-0 -/2 2 7/2-5/ /4 PageNo $9.50 / /2-5/ /4 PageNo $0.5 / /2-5/ /4 PageNo $.0 / /2-5/ /4 PageNo $2.5 / /2-5/ /4 PageNo $2.90 / /2-5/ /4 PageNo $4.50 / /2-5/ /4 PageNo $5.40 / /2-5/ /4 METRIc Stud Size M M8 M0 M2 M M20 M24 A B c $0.95 $.00 $.05 $.20 $.0 $2.0 $2.75 While we show only the most popular items we can supply their entire range of products. See our website or inquire. 590

30 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 PLAIN CLAMPS CLAMPING & SET-UP COMPONENTS SERIES 80: TUGGER T-SLOT BOLT KITS SHORT SERIES Kit contains: 24 T-Slot Bolts - 4 Each of -/2, 2, 2-/2,, -/2 and 4 Long. 8 Flange Nuts T-Slot Cleaner Holder For material information see individual components. Thread Table 4 Each Size Slot O.A.L. LONG SERIES 20 $.0 /8- /8 -/2 thru 4 Holder Kit contains: $.70 /2- /2 -/2 thru /8-5/8 -/2 thru 4 24 T-Slot Bolts - 4 Each $50.50 of, 4, 5,, 7 and 8 2 $2.5 /8- /8 thru 8 Long 2 $4.50 /2- /2 thru /8-5/8 thru 8 8 Flange Nuts $7.5 2 /4-0 /4 thru 8 T-Slot Cleaner $25.20 For material information see individual components. Tapered nose allows clamping in small areas. Black Oxide Finish. Material: 08 Steel Case Hardened Stud Size A B c D E F P ageno $ /2 /2 / 5/ and /8 27/2 P ageno $ /8-7/ 5/ and /8 -/2 040 $4.0 -/8 /4 2-/ 5/ and /8-5/2 P ageno $9.0 2-/2 -/8 /2 / /2 /2 P ageno $ /4 /4-5/ /2-5/2 P ageno $5.85 -/4 7/8 2-/ /2-9/2 P ageno $.20 2-/2 -/4 5/8 9/ 5/8 /2 P ageno $ /2 /4 -/ 5/8-9/2 P ageno $8.5 -/2 7/8-5/ 5/8 -/ $ /2 /4 -/ /4 -/2 P ageno $.5 -/2-5/ /4-5/2 P ageno $ /4 -/8 2-/ /4 -/2 P ageno $.5 2 -/4 -/ 7/8 and -27/2 P ageno $ /8-5/ 7/8 and 2-/2 P ageno $ /2 2-5/ 7/8 and 2-/2 TOGGLE PADS Material: 2L4 Steel Black oxide finish Case Hardened Many sizes conform to TCMAI standards Pad swivels 0 degrees from vertical in any direction. Assures positive gripping use when high clamping pressures are required PageNo Thread A B c D E 4402 $4.5 /4-20 5/8 5/8 /2 /2 440 $5.20 5/-8 / / 9/ 7/ 4404 $5.20 /8- /4 /4 5/8 / $5.50 /2-7/8 /4 7/2 440 $5.45 5/8- -/ 7/8 9/ 4407 $8.5 /4-0 -/4-5/ -/ / $ /8 -/ -/8 LEVELING PADS Material: 2L4 Steel Black oxide finish Case hardened Many sizes conform to TCMAI standards Pad swivels 0 degrees from vertical in any direction. Large pad diameter provides solid support use as a foot for machine tools, benches, electronic racks, etc. Special sizes quoted on request. PageNo Load A B c D E Limits 4440 $8.20 /8- -/4 7/8 5/8 / 750 lbs. PageNo $0.0 /2- -7/8 -/8 /4 / lbs. PageNo $4.85 5/8-2-/2 -/4 7/8 5/ 000 lbs. PageNo $20.5 /4-0 -/2 -/ / lbs. METRIc A B c D Stud Size E F LEVELING PAD & STUD ASSEMBLY M-M8-M0 M-M8-M0 M-M8-M0 M2 M2 M2 M M M M20 M20 M20 M24 M24 M $8.25 $.05 $4.0 $9.0 $2.85 $5.85 $.20 $4.05 $8.5 $5.05 $.5 $0.5 $.5 $47.5 $59.45 Material: 2L4 Steel with Zinc Plating Zinc coating deters rust Integral stud and hardened ball swivels 0 degrees from vertical in any direction Swivel action facilitates leveling of machine tools, benches, electronic racks, etc. - even on rough surfaces. PageNo Thread Load A B c D Limits $ /8 /8- -/4 2-/ $2.45 -/8 /2- -7/8 -/ $8.45 -/4 5/8-2-/2-5/ $ /2 /4-0 -/

31 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 SPHERICAL WASHERS Black Oxide Finish Case Hardened Material: 2L4 steel Tops and bottoms also sold separately Reduces stress on threads Bottom Washer can be used with Spherical Flange Nuts Compensates for slight misalignment between the workpiece and strap clamp. Many sizes conform to TCMAI standards. ASSEMBLIES Male (TOP) SPHERICAL WASHERS FEMALE (BOTTOM) SPHERICAL WASHERS CLAMPING & SET-UP COMPONENTS SERIES 80 Steel A B Total PageNo Male Female Stud Deg. Part Part Size c Rotation PageNo $ / and /4 / 8 and $ / and /8 /4 5 and 4270 $ / and/2 5/ 4 and $ /8 5/ $ /4 / $ /8 / $ / $ /8 / $ /4 / $ /2 /2 P ageno PageNo Rad. Stud Size A B c R 4272 / and /4 9/2 5/8.20 / / and /8 /2 7/8.0 -/ / and/2 7/2 -/8.88 -/ /8 2/2 -/8.88 -/ /4 25/2-5/8.2 2-/ /8 5/ -/ / / / /8 -/ 2-/ /4-5/ 2-/ /2-9/ 2-7/8.50 $0.95 $.5 $.45 $.70 $2.20 $2.75 $.25 $5.95 $.0 $8.85 STANDARD SPRING PLUNGERS Heavy End Forces Steel Plunger has Carbon, Case Hardened Nose and Black Oxide finish on bodies. Nylon Locking element is standard on all sizes. Many sizes conform to TCMAI standards. INcH End Force Steel lbs PageNo Thread -.00 Initial Final A B c D 5200 $ / $ / $ / $ / $ / $ / $ /4-20 / $ / $ /8- -/ $ /2- -/ $ /8- -/ $ /4-0 -/ $ / METRIc Steel Part Initial 8 (4.05) 25 (5.2) 25 (5.2) 45 (0.2) 7 (.57) 9 (2.02) 9 (2.02) 0 (2.25) End Force N* (lbs.) Final 50 (.24) 70 (5.74) 70 (5.74) 0(24.7) 20 (4.5) 5 (7.87) 5 (7.87) 55 (2.) Thread A M x.0 M8 x.25 M0 x.50 M x.0 M8 x.25 M0 x.50 B mm c mm mm -.025mm D $4.75 $4.95 $5.0 $5.25 $4.75 $4.95 $5.0 $5.25 * Newton P ageno PageNo Rad. Stud Size A B c R SPRING AND BALL PLUNGER WRENCHES Inches mm 4274 / and /4 5/ 5/8.20 / / and /8 7/ 7/8.5 -/ / and/2 9/ -/8.88 -/ /8 / -/8.2 -/ /4 / -5/ / /8 -/ / / / /8 -/4 2-/ /4 -/8 2-/ /2-5/8 2-7/ $0.95 $.5 $.45 $.70 $2.20 $2.75 $.25 $5.95 $.0 $8.85 Designed to eliminate excessive spring compression during installation and removal of spring and ball plungers $ P ageno $ M $ M $4.80 /4-20 M $4.80 5/-8 M8 P ageno $5.5 /8- M0 P ageno $5.5 /2- M2 P ageno $7.55 5/8- P ageno $7.55 /4-0 P ageno $8.05-8

32 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 NUzzLER EDGE CLAMPS Clamp material: 08 steel Black oxide finish Edge Clamps feature a double action, adjusable nose which exerts clamping pressures both downward and inward through a 45 angle. Noses have serrations for better gripping of non-finished or semi-finished workpieces. Tapered slots prevent clamp from sliding off the workpiece during tightening. Length A is calculated with nose raised /8. The Low Profile Nose provides a greater machining clearance. Optional removable aluminum nose cap prevents damage to your workplace. CLAMPING & SET-UP COMPONENTS SERIES 80 PageNo Nose Wrench A B c D E F Style G Size PageNo $9.70-7/8 5/8 /4 5/ /2 L /8 5/2 PageNo $4.5 2-/8 5/8 /4 5/ 5/ L /8 5/2 PageNo $ /8 5/8 -/4 5/ 5/ L /8 5/2 PageNo $ / -/4 5/8 /8 /8 7/ L /4 / 890 $ /4 -/4 5/8 / /8 /2 L /4 / 80 $ /8 -/4 5/8 2 /8 / L /4 / 892 $4.5 4-/ -/4 5/8 2-/ /8 5/ L /4 / 805 $4.20-5/ -/2 /4 /4 /2 / L /8 /4 807 $ / -/2 /4 2-/2 /2 5/8 L /8 /4 82 $4.70-7/8 -/2 7/8 -/4 /2 /2 L /4 /4 825 $ / -/2 7/8 2 /2 7/8 L /4 /4 827 $ /4 -/2 7/8 /2 -/8 L /4 /4 809 $ / -/2 -/4 2-/4 /2 -/ L /8 /4 82 $ /8 -/2 -/4-5/ /2 -/ L /8 /4 70 $4.20-5/ -/2 /4 5/8 5/8 / L /8 /4 72 $ / -/2 /4 2-/2 5/8 5/8 L /8 /4 74 $4.70-7/8 -/2 7/8 -/4 5/8 /2 L /4 /4 7 $ / -/2 7/8 2 5/8 7/8 L /4 /4 8 $.0 5-/4 2 -/4 -/8 /4 27/2 L /8 5/ 88 $4.5-7/8 5/8 /4 5/ /2 S 5/8 5/2 820 $ /8 5/8 /4 5/ 5/ S 5/8 5/2 8 $ /8 5/8 -/4 5/ 5/ S 5/8 5/2 802 $ / -/4 5/8 /8 /8 7/ S 5/8 / 89 $4.5 2-/4 -/4 5/8 / /8 /2 S 5/8 / 804 $ /8 -/4 5/8 2 /8 / S 5/8 / 89 $ / -/4 5/8 2-/ /8 5/ S 5/8 / 80 $ / -/2 /4 /4 /2 / S /4 /4 808 $ / -/2 /4 2-/2 /2 5/8 S /4 /4 824 $47.5-7/8 -/2 7/8 -/4 /2 /2 S 7/8 /4 82 $ / -/2 7/8 2 /2 7/8 S 7/8 /4 828 $ /4 -/2 7/8 /2 -/8 S 7/8 /4 80 $ / -/2 -/4 2-/4 /2 -/ S /4 /4 8 $ /8 -/2 -/4-5/ /2 -/ S /4 /4 PageNo $ / -/2 /4 5/8 5/8 / S /4 /4 7 $ / -/2 /4 2-/2 5/8 5/8 S /4 /4 75 $47.5-7/8 -/2 7/8 -/4 5/8 /2 S 7/8 /4 77 $ / -/2 7/8 2 5/8 7/8 S 7/8 /4 8 $ /8 -/2 -/4 2-/4 /2 -/ H /4 84 $9.0 7-/8 -/2 -/4-5/ /2 -/ H /4 85 $ /4 2 -/4 -/8 /4 27/2 H -/4 5/ 8 $80.0-7/ 2-/2 -/2 2 7/8 5/ H -/2 /2 While we show only the most popular items, we can supply their entire range of products. See our website or inquire. 59

33 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 CLAMPING & SET-UP COMPONENTS SERIES 80: STANDARD BALL PLUNGERS Stainless Steel Ball Bodies are color coded to indicate end forces: Zinc = Light Force Black = Standard Force Gold = Heavy Force Nylon locking element is standard on all sizes. Many sizes conform to TCMAI Standards. It is suggested the tapped installation hole be countersunk 90 by /2 larger than major thread diameter to prevent installation damage to locking element. Ball Plunger INcH Body End Force Ball P agenoc color lbs. PageNo Dia. Type Initial Final A B c D P ageno $4.5 Black / P ageno $.85 Black / P ageno $.75 Black / P ageno $.45 Black / $.45 Black / $.25 Zinc / $.25 Black / $.25 Gold / $.25 Zinc /4-20 7/ $.25 Black /4-20 7/ $.25 Gold /4-20 7/ $.25 Zinc /-8 7/ $.25 Black /-8 7/ $.40 Gold /-8 7/ $.40 Zinc /8-5/ $.40 Black /8-5/ $.40 Gold /8-5/ P ageno $.0 Zinc /2- / P ageno $.0 Black /2- / P ageno $.0 Gold /2- / $4.0 Zinc /8- / $4.0 Black /8- / P ageno $4.0 Gold /8- / METRIc Body color Type End Force N* (lbs.) Thread B c D Initial Final A mm mm mm STAINLESS STEEL BALL PLUNGERS Stainless Steel Ball Bodies are color coded to indicate end forces: Plain Stainless Steel = Light Force Black = Standard Force Gold = Heavy Force Nylon locking element is standard on all sizes. Many sizes conform to TCMAI Standards. It is suggested the tapped installation hole be countersunk 90 by /2 larger than major thread diameter to prevent installation damage to locking element. INcH P agenoc Body color End Force lbs. PageNo Ball Dia. Type Initial Final A B c D 9950 $4.25 Plain / $4.05 Plain / $.80 Plain / P ageno $.50 Plain / P ageno $.50 Plain / P ageno $.80 Plain / P ageno $.85 Black / $.85 Gold / $4.20 Plain /4-20 7/ $4.20 Black /4-20 7/ P ageno $4.20 Gold /4-20 7/ $4.75 Plain /-8 7/ $0.00 Black /-8 7/ $4.75 Gold /-8 7/ P ageno $5.25 Plain /8-5/ $5.25 Black /8-5/ P ageno $5.25 Gold /8-5/ $5.25 Plain /2- / $5.25 Black /2- / $5.25 Gold /2- / $7.00 Plain /8- / $7.00 Black /8- / $7.00 Gold /8- / * Newton Black Black Zinc Gold Black Zinc Gold Black Zinc Gold Black Zinc Gold 4 (.90) 9 (2.02) 2 (.45) 28 (.0) 5 (.7) 5 (.2) 40 (9) 20 (4.5) 8 (.8) 0 (.5) 0 (.75) 0 (2.25) 75(.8) 0 (2.25) (2.92) (.5) 40 (9.0) 0 (.75) 0 (2.25) 0 (.5) 5 (7.87) 5 (.7) 90 (20.2) 55 (2.) 20 (4.5) 5(25.85) M4 x 0.7 M x.0 M x.0 M x.0 M8 x.25 M8 x.25 M8 x.25 M0 x.5 M0 x.5 M0 x $.85 $4.0 $4.0 $4.0 $4.5 $4.5 $4.5 $4.5 $4.5 $4.5 $5.5 $5.5 $5.70 While we show only the most popular items we can supply their entire range of products; please inquire. 594

34 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 ANGLE PLATES High tensile cast iron construction seasoned against distortion. Tolerances (Flat and Square ): Machined Finish - within.002 per. Ground Finish - within.0005 per on the working surface. All ends machined square and parallel within.002 per. PLAIN ANGLE PLATES SERIES 4: SUBURBAN - USA SERIES 42: MEDA - SUPERIOR IMPORT B MEDA Size SUBURBAN Weight of Ground Machined Ground ABc (lbs.) Ribs x x $.90 2 x 2 x $ $ x x $ $ x 4 x $ $ x 5 x $ $ x x $ $ x 8 x $ $ x 0 x $ $ x 2 x $ $ SLOTTED ANGLE PLATES - WEBBED END SERIES 4: SUBURBAN - USA SERIES 7: MEDA - SUPERIOR IMPORT Webbed End plates are Machined or Ground on outside faces and ends. (A) c A Size Weight MEDA SUBURBAN Ground Machined Ground (B) (c) (lbs.) 2-/2 2 -/ $.0 - -/2 2-/ $ /2 -/ $ / $ /2 4-/ $ $ $ $ $ $54.00 $54.90 $72.95 $99.90 $2.0 $5.00 $80.90 $ $.0 $4.0 $4.5 $20.40 $25.80 $2.0 $47.40 $ B c $59.40 $.0 $90.90 $44.00 $2.0 $2.0 $2.75 $ A WORK HOLDING DEVICES SLOTTED ANGLE PLATES - OPEN END SERIES 44: SUBURBAN - USA SERIES 8: MEDA - SUPERIOR IMPORT Open End plates are Machined or Ground on all faces and ends. Size MEDA SUBURBAN Weight Ground Machined Ground (A) (B) (c) (lbs.) B c A 4-/2 -/ $ / $ /2 4-/ $ $ $ $ $ $72.95 $02.0 $20.0 $42.20 $7.40 $27.80 $ $0.50 $42.20 $7.40 $.20 $24.00 $7.20 $2.90 GIANT SLOTTED ANGLE PLATES SERIES 4: SUBURBAN - USA SERIES 7: MEDA - SUPERIOR IMPORT Machined Finish* Webbed End Size MEDA SUBURBAN Weight ABc x 2 x 9 72 lbs $ $ x x 2 45 lbs $ $8.0 2 x 24 x 8 00 lbs $ x 24 x 8 4 lbs $ x 0 x lbs $5.0 *SUBURBAN Ground Finish plates are available. See our website or inquirre. B c A 595

35 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 ANGLE PLATES & V BLOCKS WORK HOLDING DEVICES UNIVERSAL RIGHT ANGLE IRONS SERIES 4: SUBURBAN - USA SERIES 9: MEDA - SUPERIOR IMPORT ADJUSTABLE ANGLE PLATES (TILTING TABLES) SERIES 47 Table Size Area Height Weight AA 5 x 7 -/4 7 lbs AA2 2 7 x 0 5-/2 4 lbs AA 0 x 5 7-/2 80 lbs SWIVEL ANGLE PLATES SERIES 47: Strong construction. Setting is locked with two screws. Range: 0-90, graduated in degrees. Machined T slots. PageNo Table Size Area Height Weight SA 5 x 4-/2 4 lbs SA2 2 x lbs SA 8 x 0 -/2 2 lbs SA4 4 0 x lbs SA5 5 2 x lbs High tensile cast iron construction seasoned against distortion. Tolerances (Flat and Square): Machined Finish - within.002 per. Ground Finish - within.0005 per on the two working surfaces. All ends machined square and parallel within per. Strong construction. Setting is locked with two screws. Range 45 right and left from the horizontal, graduated in degrees. Machined T slots. B A c MEDA SUBURBAN P ageno Ground Machined Ground ABc Weight -/4 x 4 x 5 0 lbs $ $ x 4 x lbs $ $ x 5 x * lbs $ $ /2 x 5 x 8** 2 lbs $ $ x 8 x 2 44 lbs $ $ /2 x 7 x 0 7 lbs $ $ /2 x 8 x 0 40 lbs $ $ x x 8 2 lbs $ $ x 0 x 2 75 lbs $ $ x 9 x 94 lbs $ $ x 2 x 0 lbs. 900 $ x 2 x lbs $ *4-/2 x 5 x = SuBuRBAN **4 x 5 x 8 = SuBuRBAN $0.00 $55.00 $20.00 $0.00 $0.00 $20.00 $.5 $ quadruple V-BLOCKS SERIES 48: Made from seasoned closed grained cast iron universal V-block consisting of four different size grooves Supplied in pairs Width of Vee Inch mm /4 x -/ x -9/ x 2 20 x 0 x 40 x /4 x -/ x -9/ x 2 20 x 0 x 40 x / x -9/ x 2 x 2-/8 0 x 40 x 50 x / x -9/ x 2 x 2-/8 0 x 40 x 50 x / x 2 x 2-/8 x 2-/4 40 x 50 x 0 x /8 x 2-/4 x -5/2 x 4 0 x 70 x 80 x 00 Thickness Length Height of Blocks (95mm) 2- (70mm) -/8 (5mm) (00mm) 4 (00mm) -/ (0mm) (20mm) 4- (20mm) -/8 (5mm) (20mm) 4- (20mm) 2-/8 (0mm) 2850 (50mm) (50mm) (75mm) (200mm) 8 (200mm) 4 (00mm) V BLOCKS SERIES 48: Supplied in matched and numbered pairs. Blocks are accurately machined square and parallel. 90 V. Dimensions Length Thick- Across ness Weight Lgth. V Height (Each) (Per Pr.) CVB2 2 -/4 5/.9 lbs CVB -/4 2-/8-5/ 2.4 lbs CVB4 4 2-/4 2-5/8-5/8 4. lbs CVB5 5 2-/2 -/8 2 8 lbs CVB -/8 -/2 2-/2 lbs CVB7 7 -/2 4-/2 27 lbs CVB8 8 4-/2 5-/ lbs CVB0 0 -/2 5 7 lbs CVB2 2 -/ lbs $.20 $28.70 $24.00 $2.70 $47.0 $70.80 $402.0 $87.90 $557.0 $79.80 $28.0 $40.70 $5.5 $04.25 $0.70 $2.90 $.80 $4.0 $7.70 $.0 $7.80 $.0 $84.75 $ $7.5

36 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 PERMANENT MAGNETIC CHUCKS - (RECTANGULAR AND ROUND) SERIES : Made with closely spaced magnets providing full holding power over entire top plate area. Low height for maximum work space. End stop plate and hold-down clamps included with each chuck. REcTANGULAR ROUND Size Diameter 4 x $ x $ x $ x $ x $ PERMANENT MAGNETIC CHUCKS SERIES 4: Magnum Force TM SUBURBAN S best chuck, combination standard and fine pole. $8.05 $25.40 $97.90 $55.20 FINE POLE PERMANENT MAGNETIC CHUCKS - (RECTANGULAR AND ROUND) SERIES 2: Similar to Series chucks above but with extremely close pole spacing for holding very thin and very small work pieces. REcTANGULAR Rectangular MAGNETIC SURFACE GRINDER CHUCKS SERIES 4: Two tie down clamps, two rails and removable ON/OFF handle included. Ceramic magnet cannot lose magnetism and cannot be demagnetized. Sealed against dirt and liquids, and can be used in EDM machines. Overall height is 2-5/8 Standard Pole models have /4 poles and /8 separators. Fine Pole models have /8 poles and /8 separators. STANDARD ROUND Dimensions Diameter 4 x $ x $ x $ x $ $ $5.0 $59.75 $8.80 WORK HOLDING DEVICES FEATURES DUAL MAGNETS provide 20% more power than our standard chuck and positive shut-off for easy workpiece removal. ceramic MAGNETS are used because they never lose their holding power. SUBMERSIBLE DESIGN for use in EDM or other fluids. MAINTENANcE FREE because chucks are sealed and lubricated. RIGID WORK SURFAcE provided by laminated and brazed top plate. MAXIMUM HOLDING of both small and large parts due to combination fine/standard pole spacing LOW HEIGHT for more work clearance clamps INcLUDED L W H Wt.(lbs) DMB / DMB / DMB / DMB / DMB- -/2 -/2 2-/ DMB / DMB / DMB / DMB / DMB / DMB / DMB / DMB /2 40 DMB / DMB / DMB / DMB / DMB / DMB /2 2 PageNo $900.0 $ $0.05 $27.0 $058.0 $2.45 $24.55 $4.00 $.85 $84.55 $.5 $274.5 $ $275.0 $ $85.20 $ $ $ L W Weight Inch Inch lbs. MCB MCB MCB MCB MCB MCB MCB MCB MCB MCB MCB MCB MCB MCB MCB FINE POLE MC--FP* 4084 MCB-47-FP MCB-50-FP MCB-2-FP MCB-4-FP MCB-8-FP MCB-82-FP MCB-85-FP MCB-88-FP MCB-824-FP MCB-05-FP MCB-08-FP MCB-024-FP MCB--FP MCB-28-FP MCN-4-FP *Parallel chuck only. $ $45.05 $8.55 $98.05 $4.70 $08.00 $08.20 $ $24.70 $205.0 $ $4.80 $.45 $45.45 $ $ $57.75 $74.85 $ $ $5.75 $2.95 $ $ $ $42.00 $28.5 $9.45 $855.5 $42.0 $

37 from MARYLAND METRICS P.O. Box 2 Owings Mills, MD 27 USA ph: (40)58-0 (800)8-80 fx: (40)58-42 (800)872-9 ROUND PERMANENT MAGNETIC CHUCKS SERIES 4: MAGNETIC CHUCK, V-BLOCKS AND PARALLELS SERIES 509: WORK HOLDING DEVICES Permanent, ceramic magnets for superior holding power, never lose their strength. Back surface of the aluminum chuck body has tapped holes and turned counterbore for convenient mounting on machines. All models except 5-/4 dia. which uses the swing-type on-off method, are watertight. Standard Pole models have /4 poles and /8 separators. Fine Pole models have /8 poles and /8 separators. STANDARD POLE Wt. s Diameter lbs. RMC-5 5-/ RMC- -/ RMC-9 9-/ RMC-2 2-/ RMC-5 5-/ RMC RMC FINE POLE RMC--FP -/ RMC-8-FP 7-/ RMC-0-FP RMC-2-FP 2-/ $49.05 $70.00 $4.0 $4.70 $79.45 $ $70.70 $ $2.95 $.45 $20.5 Ground all over, made of selected steel for transferring maximum holding power of magnetic chucks. Description Pair of small V-Blocks /8 x 2-/8 x 2 Individual Long V-Block /8 x 2-/8 x 4-/8 Pair of Long V-Blocks /8 x 2-/8 x 4-/8 Pair of Parallels x 2 x 4 Combination set of one pair small V-Blocks and one pair parallels. $55.00 $55.00 $0.00 $9.00 $75.00 MINI MAGNETIC CHUCK SERIES : Top and bottom surfaces are both magnetic but are separated from each other. Many uses, including converting a regular surface gage to a magnetic unit. Dimensions: 2-/2 wide x -/2 long x 7/8 high 5000 $25.90 MAGNETIC V-BLOCKS - DUAL VEE SERIES 509: All working surfaces are precision ground. Ideal for holding, inspection and light machining. Accuracy of Vee is within (0.007mm). Powerful, permanent magnet is controlled by rotary ON/OFF switch. Supplied in fine finished wooden box. long V-blocked is 50% longer and 00% stronger than 4 V-blocks. Length Width Height (70mm) 2-/8 (54mm) 2-7/8 (7mm) (00mm) 2-(70mm) -(95mm) 72 4 (00mm) 2-(70mm) -(95mm) 720 (50mm) (75mm) -(95mm) V-Width Big V Small V DUAL - VEE MAGNETIC V-BLOCK STARRETT SERIES 27: Magnetic V-blocks are designed for versatility and accuracy. All working surfaces are precision ground to provide convenient set-ups for inspection and light machining. Two precision vees will hold round stock sizes from /4 to - diameters. A powerful permanent magnet is controlled by a rotary switch. All working surfaces are heat treated for long wear and stability. Each block is 2-/2 wide x high x ( x 75 x 75mm) long. The top vee is -/2 (8mm) wide at top, and (mm) wide at bottom with 90 included angles. catalog EDP - (44mm) 5 2 DEMAGNETIzER SERIES 24: For quickly removing residual magnetism. Works off standard 0 Volt AC current. unit has precision working surfaces. $ (Single) -/2 (8mm) (mm) 7200 (Single) 2 (50mm) (mm) 72 (Pair) 2 (50mm) (mm) 720 (Single) 2-/4 (55mm) (25mm) $9.5 $80.20 $4.85 $4.25 Working Surfaces -/4 x 4-/ $