ISO INTERNATIONAL STANDARD. Vis a f&e hexagonale partiellement filetees - Grades A er B. Third edition
|
|
- Morris Bailey
- 6 years ago
- Views:
Transcription
1 NTERNATONAL STANDARD SO Third edition Vis a f&e hexagonale partiellement filetees - Grades A er B Reference number SO 4014:1999(E)
2 SO 401 4:1999(E) Foreword SO (the nternational Organization for Standardization) is a worldwide federation of national Standards bodies (SO member bodies). The workof preparingnternationalstandardsisnormally carried outthroughsotechnical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. nternational organizations, governmental and non-governmental, in liaison with SO, also take part in the work. SO collaborates closely with the nternational Electrotechnical Commission (EC) on alt matters of electrotechnical standardization. nternational Standards are drafted in accordance with the rules given in the SO/EC Directives, Part 3. Draft nternational Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an nternational Standard requires approval by at least 75 % of the member bodies Casting a vote. nternational Standard SO 4014 was prepared by Technical Committee SO/TC 2, Fasteners. This third edition cancels and replaces the second edition (SO 4014:1988) which has been technically revised. a 0 SO 1999 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. nternational Organization for Standardization Case postale 56 CH-1211 Geneve 20 Switzerland lnternet iso9iso.ch Printed in Switzerland
3 0 SO SO 401 4: 1 999( E) lntroduction This nternational Standard is part of the complete SO product Standard series on external hexagon drive fasteners. The series comprises: a) hexagon head bolts (SO 4014 to SO 4016 and SO 8765); b) hexagon head screws (SO 4017, SO 4018 and SO 8676); C) hexagon nuts (SO 4032 to SO 4036, SO 8673 to SO 8675); d) hexagon bolts with flange (SO 4162 and SO 15071); e) hexagon nuts with flange (SO 4161 and SO 10663); 0 f ) structural bolts and nuts (SO 4775, SO 7411 to SO 7414 and SO 7417)
4
5 NTERNATONAL STANDARD o SO SO 4014:1999(E) Hexagon head bolts - Product grades A and B m 1 Scope This nternational Standard specifies the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm, whichever is shorter and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm, whichever is shorter. f, in Special cases, specifications other than those listed in this nternational Standard are required, they should be selected from existina nternational Standards, for example SO 724, SO 888, SO 898-1, SO 965-1, SO , SO 4753 and SO Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this nternational Standard. For dated references, subsequent amendments to, orevisions of, any of these publications do not apply. However, parties to agreements based on this nternational Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of SO and EC maintain registers of currently valid nternational Standards. SO , Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions. SO 724: 1993, /SO general-purpose metric screw threads - Basic dimensions. SO 888:1976, Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts. SO 898-1: 1999, Mechanical properties of fasteners made of carbon steel and alloy steel- Part 1: Bolts, screws and studs. SO : 1 998, SO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data. SO 3269:- ), Fasteners - Acceptance inspection. SO :1997, Mechanicalproperties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs. SO 401 7:1999, Hexagon head screws - Product grades A and B. SO 4042:1999, Fasteners - Electroplated coatings. SO 4753:3), Fasteners - Ends of parts with external metric SO thread. ) To be published. (Revision of SO 3269:1988) *) To be published. (Revisioin of SO 4753:1983) 1
6 SO 401 4:1999(E) 0 SO SO :-3), Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C. SO :1988, Fasteners - Sutface discontinuities - Part 1: Bolts, screws and studs for general requirements. SO 8839:1986, Mechanicalpropetties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals. SO 8992:1986, Fasteners - General requirements for bolts, screws, studs and nuts. SO 10683:-4), Fasteners - Non-electrolytically applied zinc flake coatings. 3 Dimensions See Figure 1 and Tables 1 and 2 Symbols and description of dimensions are defined in SO ) To be published. (Revision of SO :1978) 4) To be published. 2
7 0 SO SO 4014: 999( 1 E) Dimensions in millimetres X X P= 15" to 30" 0 Point shall be chamfered or for threads = M4 may be as-rolled (sheared end) (See SO 4753) lncomplete thread U s 2P Referee datum for d, Maximum underhead fillet Figure 1 3
8 Table 1 - Preferred threads Dimensions in millimetres Thread (d) M1,6 M2 M2,5 M3 M4 M5 M6 M8 M10 P 0, , ,7 0,8 1 1,25 1,s b b 20 ref. 18 C d ,40 C 0,25 0,25 max. 0, ,50 OS ,lO min. 0,lO 0,lO 0,15 0, ,15 5 0,15 0,15 da 2,6 max , ,2 ds nom. = max. 1,60 2m 2, ,oo 5, ,00 10,oo Product A min. 1, , ,82 4,82 5,82 7,78-9,78 grade B 19% 2,75 1, ,25 4, ,W Product * mim 2,27 3,07 4, ,88 6,
9 Prcduct grade A B 1, and lg fg r nom ,6!5 15,6!5 19,58 g g, 12, ,42 min. max. min. max. min ,951 21,05 g 6 10 s g min. max. 2,75 5 6,75 s g min. max. s min. g max. s rnin. g s g min. max. i i i i i i i i i For sizes above the solid, boldface stepped line SO 4017 is recommended 5 lg 4 g rnin. max. min. max , , ,05 28,95 30,42 31,05 L l , ,75 36, ,75 41, ,75 46, , ,75 51, , , , , , ,3 55, ,5 60,6 61, ,5 70, ,6 90,7 110,7 120, ,25 91, ,7 101,75 108,25 111, ,25 121,75
10 P 0 Table 1 (continued) Dimensions in millimetres (D (D (D n m W
11 SO 401 4: 1 999( E) -mil E -4 E
12 SO 401 4:1999(E) 0 SO Table 2 - Non-preferred threads Dimensions in rnillirnetres,25 90,7 89,3 90 ' ' 40 27, , , ,25100, , , ,25, , ?, , ,3 120,7 118,25 121, , , ,2 130, , , ! , ,5 84! ,2 150, , , , ,3!OO ,7 222,3! ,7! ,7! ,4 81,
13 Thread (4 M33 M39 M60 M45 M52 Pa 3,5 4 4, b ref b 325 wo 302,5-443,15-436, , , , ,85 ioo ,85 NOTE Popularlengthsaredefinedin tens of ls and lg: - for product grade A. above the dashed, stepped line; - for product grade B, below this stepped line. P is the pitch of the thread. kw, min = 0.7 kmn For lengths lnom G 125 mm. 9, max = lnom -b lengths For 125 mm <, s 200 mm. L, min = lg. max - 5P lengths For, > 200 mm. length. minimum grip $, is the 9
14 ~ EXAMPLE SO 401 4:1999(E) 0 SO 4 Specifications and reference Standards See Table 3. Material General nternational requirements Standard Thread Tolerance nternational Standards Mechanical Property properties ClaSSa Tolerances nternational Standards Product grade nternational Standard Table 3 - Specifications and reference Standards -~ Steel Stainless steel SO g SO 724, SO d < 3 mm: as agreed d s 24 mm: A2-70, A4-70 3mmsds39mm: 24mm d s 39 mm: 5.6, 8.8, 9.8, 10.9 A2-50, A4-50 d > 39 mm: as agreed d > 39 mm: as agreed 3mmsds39mm: d s 39 mm: SO SO d > 39 mm: as agreed d<3mmandd>39mm: as agreed Fords24mmands 10dor150mmb:A For d > 24 mm or > 10 dor 150 mmb: B SO Non-ferrous meta1 Materials specified in SO 8839 Finish and/or coating Acceptability As processed Requirements for electroplating are covered in SO 4042 Plain Requirements for electroplating are covered in SO 4042 Requirements for non-electrolytically applied zinc flake coatings are covered in SO lf different electroplating reql rirc?ments are desired or if requirements are needed for other finishes, they should be agreed between customer and supplier. 1 Limits for surface discontinuities are covered in SO For acceptance procedure, See SO For other property classes See SO for steel and SO for stainless steel respectively. Whichever is shorter. 5 Designation A hexagon head bolt with thread M12, nominal length 1 = 80 mm and property dass 8.8 is designated as follows: Hexagon head bolt SO M12 X
15 0 SO SO 4014:1999(E) Bibliography [l] SO , Hexagon head bolts - Product grade B - Reduced shank (shank diameter approximately equal to pitch diameter). [2] SO 401 6:1999, Hexagon head bolts - Product grade C. [3] SO 401 7:1999, Hexagon head screws - Product grades A and B. [4] SO 4018:1999, Hexagon head screws - Product grade C. [5] SO 4032:1999, Hexagon nuts, style 1 - Product grades A and B. [6] SO 4033:1999, Hexagon nuts, style 2 - Product grades A and B. [7] SO 4034:1999, Hexagon nuts - Product grade C. [8] SO , Hexagon thin nuts (chamfered)- Product grades A and B. [9] SO 4036:1999, Hexagon thin nuts (unchamfered) - Product grade B. [l 01 SO :1999, Hexagon nuts with flange - Coarse thread. [l 11 SO 41 62:-5), Hexagon bolts with flange - Small series - Product grade combination NB. [12] SO , Hexagon nuts for high-strength structural bolting with large width across flats - Product grade B - Property classes 8 and 10. [13] SO :1984, Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to /SO 888) - Product grade C - Property classes 8.8 and [14] SO 741 2:1984, Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) - Product grade C - Property classes 8.8 and [15] SO 741 3:1984, Hexagon nuts for structural bolting, style 1, hot-dip galvanize (oversize tapped) - Product grades A and B - Property classes 5, 6 and 8. 0 [16] SO 741 4:1984, Hexagon nuts for structural bolting with large width across flats, style 1 - Product grade B - Property class 10. [17] SO 741 7:1984, Hexagon nuts for structural bolting, style 2, hot-dip galvanize (oversize tapped) - Product grade A - Property dass 9. [18] SO 8673:1999, Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B. [19] SO 8674:1999, Hexagon nuts, sty/e 2, with metric fine pitch thread - Product grades A and B. [20] SO 8675:1999, Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B. [21] SO 8676:1999, Hexagon head screws with metric fine pitch thread - Product grades A and B. 5, To be published. (Revision of SO 4162:1990) 11
16 SO 401 4:1999(E) 0 SO [22] SO , Hexagon head bolts with metric fine pitch thread - Product grades A and B. [23] SO 10663:1999, Hexagon nuts with flange - fine pitch thread. [24] SO :1999, Hexagon bolts with flange -Small series - Product grade A. 12
IS INTERNATIONAL STANDARD. Slotted countersunk flat head screws (common head style) - Product grade A. Vis 9 mktaux d t&e fraisee fendue -
INTERNATIONAL STANDARD IS0 2009 Third edition 1994-04-01 Slotted countersunk flat head screws (common head style) - Product grade A Vis 9 mktaux d t&e fraisee fendue - Grade A Reference number IS0 2009:1994(E)
More informationISO INTERNATIONAL STANDARD. Hexalobular socket cheese head screws. Vis à métaux à tête cylindrique basse à six lobes internes
INTERNATIONAL STANDARD ISO 14580 First edition 2001-09-01 Hexalobular socket cheese head screws Vis à métaux à tête cylindrique basse à six lobes internes Reference number ISO 14580:2001(E) ISO 2001 PDF
More informationISO INTERNATIONAL STANDARD. Cross recessed pan head drilling screws with tapping screw thread
INTERNATIONAL STANDARD ISO 15481 First edition 1999-08-01 Cross recessed pan head drilling screws with tapping screw thread Vis autoperceuses à tête cylindrique bombée large à empreinte cruciforme, avec
More informationISO INTERNATIONAL STANDARD. Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
INTERNATIONAL STANDARD ISO 15072 First edition 1999-12-15 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique, à filetage
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4762 Fourth edition 2004-03-01 Hexagon socket head cap screws Vis à tête cylindrique à six pans creux Reference number ISO 4762:2004(E) ISO 2004 PDF disclaimer This PDF file
More informationISO INTERNATIONAL STANDARD. Cross recessed raised countersunk head drilling screws with tapping screw thread
INTERNATIONAL STANDARD ISO 15483 First edition 1999-08-01 Cross recessed raised countersunk head drilling screws with tapping screw thread Vis autoperceuses à tête fraisée bombée à empreinte cruciforme,
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10511 Third edition 2012-12-15 Prevailing torque type hexagon thin nuts (with non-metallic insert) Écrous hexagonaux bas autofreinés (à anneau non métallique) Reference number
More informationISO INTERNATIONAL STANDARD. Hexagon bolts with flange Small series Product grade A
INTERNATIONAL STANDARD ISO 15071 Second edition 2011-06-01 Hexagon bolts with flange Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique Série étroite Grade A Reference number
More informationISO Prevailing torque type hexagon regular nuts (with non-metallic insert) Property classes 5, 8 and 10
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 7040 Third edition 2012-12-15 Prevailing torque type hexagon regular nuts (with non-metallic insert) Property classes 5, 8 and 10 Écrous hexagonaux
More informationISO INTERNATIONAL STANDARD. Hexagon socket head cap screws with metric fine pitch thread. Vis à tête cylindrique à six pans creux à pas fin
INTERNATIONAL STANDARD ISO 12474 First edition 2010-10-01 Hexagon socket head cap screws with metric fine pitch thread Vis à tête cylindrique à six pans creux à pas fin Reference number ISO 12474:2010(E)
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7380-2 First edition 2011-08-01 Button head screws Part 2: Hexagon socket button head screws with collar Vis à tête cylindrique bombée plate Partie 2: Vis à tête cylindrique
More informationISO Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12
INTERNATIONAL STANDARD ISO 7041 Fourth edition 2012-05-15 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 Écrous hexagonaux autofreinés (à anneau non métallique),
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4026 Third edition 2003-12-01 Hexagon socket set screws with flat point Vis sans tête à six pans creux, à bout plat Reference number ISO 4026:2003(E) ISO 2003 ISO 4026:2003(E)
More informationISO INTERNATIONAL STANDARD. Hexalobular socket pan head screws. Vis à métaux à tête cylindrique bombée large à six lobes internes
INTERNATIONAL STANDARD ISO 14583 Second edition 2011-03-15 Hexalobular socket pan head screws Vis à métaux à tête cylindrique bombée large à six lobes internes Reference number ISO 14583:2011(E) ISO 2011
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7051 Second edition 2011-08-01 Cross-recessed raised countersunk (oval) head tapping screws Vis à tôle à tête fraisée bombée à empreinte cruciforme Reference number ISO 7051:2011(E)
More informationISO 262 INTERNATIONAL STANDARD. ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts
INTERNATIONAL STANDARD ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts A ISO 6 Second edition 998--5 Filetages métriques ISO pour usages généraux Sélection de dimensions
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO First edi tion 1992-04-15 ----.- Hexagon flange head tapping screws Ws ZI t6le ZI tete hexagonale & embase cylindro-tronconique ---- ------ -~-- -- _- ~- -.- -...-.-- Reference
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD. Aerospace MJ threads Part 1: General requirements
INTERNATIONAL STANDARD ISO 5855-1 Third edition 1999-10-15 Aerospace MJ threads Part 1: General requirements Aéronautique et espace Filetage MJ Partie 1: Exigences générales A Reference number Foreword
More informationISO INTERNATIONAL STANDARD. Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C
INTERNATIONAL STANDARD ISO 4759-1 Second edition 2000-11-15 Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C Tolérances des éléments de fixation Partie 1: Vis, goujons
More informationISO INTERNATIONAL STANDARD. Tapping screw and washer assemblies with plain washers. Vis à tôle à rondelle plate imperdable
INTERNATIONAL STANDARD ISO 10510 Second edition 2011-04-01 Tapping screw and washer assemblies with plain washers Vis à tôle à rondelle plate imperdable Reference number ISO 10510:2011(E) ISO 2011 ISO
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This
More information1 Scope. 2 Normative references. 3 Dimensions. Page 2 DIN :
Page 2 1 Scope This standard specifies dimensions and technical delivery conditions for stud bolts with metric thread made of steel, stainless steel or nonferrous metal. 2 Normative references This standard
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E)
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14583:2002 Hexalobular socket pan head screws Hexalobular socket pan head screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14579:2002 Hexalobular socket head cap screws Hexalobular socket head cap screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationISO INTERNATIONAL STANDARD. Road vehicles Pneumatic braking systems Part 1: Pipes, male fittings and tapped holes with facial sealing surface
INTERNATIONAL STANDARD ISO 4039-1 First edition 1998-08-15 Road vehicles Pneumatic braking systems Part 1: Pipes, male fittings and tapped holes with facial sealing surface Véhicules routiers Dispositifs
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number ISO 10684:2004(E) ISO 2004 PDF
More informationISO INTERNATIONAL STANDARD. Fasteners Non-electrolytically applied zinc flake coatings
INTERNATIONAL STANDARD ISO 63 First edition 2000-07-1 Fasteners Non-electrolytically applied zinc flake coatings Éléments de fixation Revêtements non électrolytiques de lamelles de zinc Reference number
More informationISO INTERNATIONAL STANDARD. Welding Studs and ceramic ferrules for arc stud welding
INTERNATIONAL STANDARD ISO 13918 Second edition 2008-02-15 Welding Studs and ceramic ferrules for arc stud welding Soudage Goujons et bagues céramiques pour le soudage à l'arc des goujons Reference number
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T5782-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 21.060.10 J 13 GB/T 6171-2016 Replacing
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 521 Second edition 2011-10-01 Machine chucking reamers with cylindrical shanks and Morse taper shanks Alésoirs à machine, à queue cylindrique et à queue cône Morse Reference
More informationISO INTERNATIONAL STANDARD. Technical drawings General principles of presentation Part 23: Lines on construction drawings
INTERNATIONAL STANDARD ISO 128-23 First edition 1999-06-15 Technical drawings General principles of presentation Part 23: Lines on construction drawings Dessins techniques Principes généraux de représentation
More informationISO 5858 Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 C Procurement specification
INTERNATIONAL STANDARD ISO 5858 Second edition 1999-11-15 Corrected and reprinted 2000-11-15 Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 C Procurement specification
More informationISO INTERNATIONAL STANDARD. Hexalobular internal driving feature for bolts and screws. Empreinte à six lobes internes pour vis
INTERNATIONAL STANDARD ISO 10664 First edition 1999-09-01 Hexalobular internal driving feature for bolts and screws Empreinte à six lobes internes pour vis A Reference number Foreword ISO (the International
More informationISO 8752 INTERNATIONAL STANDARD. Spring-type straight pins Slotted, heavy duty
INTERNATIONAL STANDARD ISO 8752 Third edition 2009-06-15 Spring-type straight pins Slotted, heavy duty Goupilles cylindriques creuses, dites goupilles élastiques Série épaisse Reference number ISO 8752:2009(E)
More informationINTERNATIONAL STANDARD 7721~2
INTERNATIONAL STANDARD 7721~2 First edition 1990-09-o 1 Countersunk flat head screws - Part 2: Penetration depth of cross recesses l/is ZI m&faux A f&fe fraiske - Partie 2: Profondeur de p&nbfrafion des
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 21.060.20 ISBN 0-626-15095-7 SANS 1700-14-11:2003 ISO 7417:1984 SOUTH AFRICAN NATIONAL STANDARD Fasteners Part 14: Hexagon nuts Section 11: Hexagon nuts for structural bolting Style 2, hot-dip galvanized
More informationISO INTERNATIONAL STANDARD. Assembly tools for screws and nuts Driving squares Part 1: Driving squares for hand socket tools
INTERNATIONAL STANDARD ISO 1174-1 Second edition 2011-04-15 Assembly tools for screws and nuts Driving squares Part 1: Driving squares for hand socket tools Outils de manœuvre pour vis et écrous Carrés
More informationISO INTERNATIONAL STANDARD. Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3310-1 Fourth edition 2000-07-15 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth Tamis de contrôle Exigences
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 603-15 First edition 1999-07-15 Bonded abrasive products Dimensions Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines Produits abrasifs agglomérés
More informationISO INTERNATIONAL STANDARD. Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawings
INTERNATIONAL STANDARD ISO 128-24 First edition 1999-06-01 Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawings Dessins techniques Principes généraux
More informationISO INTERNATIONAL STANDARD. Rolling bearings Accessories Part 2: Locknuts and locking devices Dimensions
INTERNATIONAL STANDARD ISO 2982-2 Second edition 2001-04-15 Rolling bearings Accessories Part 2: Locknuts and locking devices Dimensions Roulements Accessoires Partie 2: Écrous à encoches et dispositifs
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12128 Second edition 2001-09-15 Plain bearings Lubrication holes, grooves and pockets Dimensions, types, designation and their application to bearing bushes Paliers lisses Trous,
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 9714-1 Second edition 2012-06-01 Orthopaedic drilling instruments Part 1: Drill bits, taps and countersink cutters Instruments de forage orthopédiques Partie 1: Tarauds, forets
More informationISO 9982 INTERNATIONAL STANDARD. Belt drives Pulleys and V-ribbed belts for industrial applications PH, PJ, PK, PL and PM profiles: Dimensions
INTERNATIONAL STANDARD ISO 9982 Second edition 1998-06-15 Belt drives Pulleys and V-ribbed belts for industrial applications PH, PJ, PK, PL and PM profiles: Dimensions Transmissions par courroies Poulies
More informationISO 897 INTERNATIONAL STANDARD. Photography Roll films, 126, 110 and 135-size films Identification of the image-bearing side
INTERNATIONAL STANDARD ISO 897 Third edition 2000-10-15 Photography Roll films, 126, 110 and 135-size films Identification of the image-bearing side Photographie Films en bobines et films en formats 126,
More informationISO 1012 INTERNATIONAL STANDARD. Photography Films in sheets and rolls for general use Dimensions
INTERNATIONAL STANDARD ISO 1012 Third edition 1998-11-15 Photography Films in sheets and rolls for general use Dimensions Photographie Films en feuilles et pellicules à usage général Dimensions A Reference
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 5835 First edition 1991-01-15 lmplants for surgery - Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread - Dimensions Implants
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3019-1 Second edition 2001-06-01 Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Part 1: Inch series
More informationISO 9981 INTERNATIONAL STANDARD. Belt drives Pulleys and V-ribbed belts for the automotive industry PK profile: Dimensions
INTERNATIONAL STANDARD ISO 9981 Second edition 1998-11-01 Belt drives Pulleys and V-ribbed belts for the automotive industry PK profile: Dimensions Transmissions par courroies Poulies et courroies striées
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12947-1 First edition 1998-12-15 Textiles Determination of the abrasion resistance of fabrics by the Martindale method Part 1: Martindale abrasion testing apparatus Textiles
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 161-2 Second edition 1996-12-15 Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Part 2: Inch-based series Tubes en ma tkes
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD ISO First edition
INTERNATIONAL STANDARD ISO 6362-6 First edition 2012-07-01 Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 6: Round, square, rectangular and hexagonal tubes Tolerances
More informationISO INTERNATIONAL STANDARD. Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties
INTERNATIONAL STANDARD ISO 657-14 Third edition 2000-03-15 Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties Profilés en acier laminés à chaud
More informationISO INTERNATIONAL STANDARD. Collets with 8 setting angle for tool shanks Collets, nuts and fitting dimensions
INTERNATIONAL STANDARD ISO 15488 Second edition 2003-11-15 Collets with 8 setting angle for tool shanks Collets, nuts and fitting dimensions Pinces de serrage avec angle de réglage de 8 pour queues d'outil
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD First edition 1997~Q2-15 Thermoplastics pipes for fluids under pressure - Mating dimensions of flange adapters and loose backing flanges Tubes en mat&es thermoplastiques destin&
More informationScrew and washer assemblies made of steel with plain washers Washer hardness classes 200 HV and 300 HV
BRITISH STANDARD BS EN ISO 10644:2009 Screw and washer assemblies made of steel with plain washers Washer hardness classes 200 HV and 300 HV ICS 21.060.10; 21.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T819.
Translated English of Chinese Standard: GB/T819.2-2016 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 21.060.10 J 13 Replacing GB/T 819.2-1997
More informationISO INTERNATIONAL STANDARD. Technical drawings General principles of presentation Part 44: Sections on mechanical engineering drawings
INTERNATIONAL STANDARD ISO 128-44 First edition 2001-04-15 Technical drawings General principles of presentation Part 44: Sections on mechanical engineering drawings Dessins techniques Principes généraux
More informationISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes
INTERNATIONAL STANDARD ISO 3601-1 Fifth edition 2012-03-01 Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes Transmissions hydrauliques et pneumatiques
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 5599-1 Third edition 2001-08-15 Pneumatic fluid power Five-port directional control valves Part 1: Mounting interface surfaces without electrical connector Transmissions pneumatiques
More informationISO INTERNATIONAL STANDARD. Plain bearings Wrapped bushes Part 2: Test data for outside and inside diameters
INTERNATIONAL STANDARD ISO 3547-2 Second edition 2006-10-15 Plain bearings Wrapped bushes Part 2: Test data for outside and inside diameters Paliers lisses Bagues roulées Partie 2: Données d'essai pour
More informationISO INTERNATIONAL STANDARD. Test conditions for machining centres Part 4: Accuracy and repeatability of positioning of linear and rotary axes
INTERNATIONAL STANDARD ISO 10791-4 First edition 1998-07-01 Test conditions for machining centres Part 4: Accuracy and repeatability of positioning of linear and rotary axes Conditions d'essai pour centres
More informationISO INTERNATIONAL STANDARD. Small craft Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys, wood, other materials
INTERNATIONAL STANDARD ISO 12215-3 First edition 2002-05-01 Small craft Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys, wood, other materials Petits navires Construction de
More informationISO INTERNATIONAL STANDARD. Technical product documentation Lettering Part 6: Cyrillic alphabet
INTERNATIONAL STANDARD ISO 3098-6 First edition 2000-05-01 Technical product documentation Lettering Part 6: Cyrillic alphabet Documentation technique de produits Écriture Partie 6: Alphabet cyrillique
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14219:2003 Hexagon bolts with flange with metric fine pitch thread - Small series Hexagon bolts with flange with metric fine pitch thread - Small series EESTI STANDARDIKESKUS EESTI
More informationISO INTERNATIONAL STANDARD. Hexalobular internal driving feature for bolts and screws. Empreinte à six lobes internes pour vis
INTERNATIONAL STANDARD ISO 10664 Second edition 2005-07-01 Hexalobular internal driving feature for bolts and screws Empreinte à six lobes internes pour vis Reference number ISO 10664:2005(E) ISO 2005
More informationISO INTERNATIONAL STANDARD. Technical product documentation Lettering Part 3: Greek alphabet
INTERNATIONAL STANDARD ISO 3098-3 Second edition 2000-05-01 Technical product documentation Lettering Part 3: Greek alphabet Documentation technique de produits Écriture Partie 3: Alphabet grec Reference
More informationPolygonal taper interface with flange contact surface. Part 1: Dimensions and designation of shanks
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 26623-1 Second edition 2014-09-01 Polygonal taper interface with flange contact surface Part 1: Dimensions and designation of shanks Interfaces
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7900 Second edition 2006-06-01 Steel wire and wire products for fences Zinc- and zinc-alloy-coated steel barbed wire Fils et produits tréfilés en acier pour clôtures Ronces en
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 5001 Fifth edition 2012-08-01 Cold-reduced carbon steel sheet for vitreous enamelling Tôles en acier au carbone laminées à froid pour émaillage par vitrification Reference number
More informationISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type
INTERNATIONAL STANDARD ISO 7465 Third edition 21-12-1 Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type Ascenseurs et monte-charge Guides de cabine et de contrepoids
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3442-3 First edition 2007-02-01 Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 3: Power-operated chucks with serrated jaws Machines-outils
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 12090-1 First edition 2011-08-01 Rolling bearings Profiled rail guides for linear motion rolling bearings Part 1: Boundary dimensions and tolerances
More informationNon-destructive testing Image quality of radiographs. Part 2: Determination of the image quality value using step/hole-type image quality indicators
INTERNATIONAL STANDARD ISO 19232-2 Second edition 2013-06-15 Non-destructive testing Image quality of radiographs Part 2: Determination of the image quality value using step/hole-type image quality indicators
More informationMATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997
MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997 This Standard is the property of Iranian Ministry of Petroleum. All rights
More informationISO INTERNATIONAL STANDARD. Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
INTERNATIONAL STANDARD ISO 15065 First edition 2005-02-15 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 Fraisures pour vis à tête fraisée avec une configuration
More informationFästelement Sextandhålsskruvar med cylinderhuvud (ISO 14580:2001) Hexalobular socket cheese head screws (ISO 14580:2001)
SVENSK STANDARD SS-EN ISO 14580 Fastställd 2001-09-28 Utgåva 1 Fästelement Sextandhålsskruvar med cylinderhuvud (ISO 14580:2001) Hexalobular socket cheese head screws (ISO 14580:2001) ICS 21.060.10 Språk:
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO :1999
INTERNATIONAL STANDARD First edition 1996-06-I 5 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 5456-3:1999 Technical drawings - Projection methods - Part 3: Axonometric
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4019 Second edition 2001-09-01 Structural steels Cold-formed, welded, structural hollow sections Dimensions and sectional properties Aciers de construction Profils creux pour
More informationISO INTERNATIONAL STANDARD. Rubber Tolerances for products Part 2: Geometrical tolerances
INTERNATIONAL STANDARD ISO 3302-2 First edition 1998-03-15 Rubber Tolerances for products Part 2: Geometrical tolerances Caoutchouc Tolérances pour produits Partie 2: Tolérances géométriques A Reference
More informationFästelement Sexkanthålsskruvar (ISO 4762:2004) Hexagon socket head cap screws (ISO 4762:2004)
SVENSK STANDARD SS- Fastställd 2004-03-19 Utgåva 2 Fästelement Sexkanthålsskruvar (ISO 4762:2004) Hexagon socket head cap screws (ISO 4762:2004) ICS 21.060.10 Språk: engelska Publicerad: maj 2004 Copyright
More informationIS INTERNATIONAL STANDARD. Steel tubes - Continuous character marking and colour coding for material identification. First edition
INTERNATIONAL STANDARD IS0 9095 First edition 1990-04-01 Steel tubes - Continuous character marking and colour coding for material identification Tubes et &ments tubulaires en acier - Marquage codifikes
More informationPackaging Complete, filled transport packages and unit loads Dimensions of rigid rectangular packages
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3394 Third edition 2012-11-01 Packaging Complete, filled transport packages and unit loads Dimensions of rigid rectangular packages Emballages
More informationDisclosure to Promote the Right To Information
इ टरन ट म नक Disclosure to Promote the Right To nformation Whereas the Parliament of ndia has set out to provide a practical regime of right to information for citizens to secure access to information
More informationISO Synchronous belt drives Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH Metric and inch dimensions
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 5296 Second edition 2012-05-15 Synchronous belt drives Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH Metric and inch dimensions Transmissions
More informationISO INTERNATIONAL STANDARD. Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours
INTERNATIONAL STANDARD ISO 5751-3 Sixth edition 2010-11-15 Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours Pneumatiques et jantes pour motocycles (séries millimétriques)
More informationISO INTERNATIONAL STANDARD. Timber structures Dowel-type fasteners Part 1: Determination of yield moment
INTERNATIONAL STANDARD ISO 10984-1 First edition 2009-08-15 Timber structures Dowel-type fasteners Part 1: Determination of yield moment Structures en bois Éléments de fixation de type cheville Partie
More informationFasteners Non-electrolytically applied zinc flake coatings
INTERNATIONAL STANDARD ISO 10683 Second edition 2014-05-15 Fasteners Non-electrolytically applied zinc flake coatings Fixations Revêtements non électrolytiques de zinc lamellaire Reference number ISO 2014
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD. Rolling bearings Balls Part 1: Steel balls
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3290-1 First edition 2008-12-15 Rolling bearings Balls Part 1: Steel balls Roulements Billes Partie 1: Billes de roulement en acier Reference number
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 0-3 First edition 00-0-01 Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 3: General dimensional and geometrical tolerances
More informationNATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA
Translated English of Chinese Standard: GB/T18230.1-2000 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB/T
More informationIS INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 1328-2 First edition 1997-08-01 Cylindrical gears - IS0 system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and
More informationISO 4090 INTERNATIONAL STANDARD. Photography Medical radiographic cassettes/screens/films and hard-copy imaging films Dimensions and specifications
INTERNATIONAL STANDARD ISO 4090 Third edition 2001-08-15 Photography Medical radiographic cassettes/screens/films and hard-copy imaging films Dimensions and specifications Photographie Cassettes/écrans/films
More informationISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes
INTERNATIONAL STANDARD ISO 3601-1 Fourth edition 2008-07-01 Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes Transmissions hydrauliques et pneumatiques
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13799 First edition 2012-07-01 Ships and marine technology Ship s mooring and towing fittings Recessed bitts (Casting type) Navires et technologie maritime Corps-morts et ferrures
More informationISO INTERNATIONAL STANDARD. Ergonomic design for the safety of machinery Part 3: Anthropometric data
INTERNATIONAL STANDARD ISO 15534-3 First edition 2000-02-15 Ergonomic design for the safety of machinery Part 3: Anthropometric data Conception ergonomique pour la sécurité des machines Partie 3: Données
More informationISO 216 INTERNATIONAL STANDARD. Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction
INTERNATIONAL STANDARD ISO 216 Second edition 2007-09-15 Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction Papiers à écrire et certaines
More informationISO INTERNATIONAL STANDARD. Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness
INTERNATIONAL STANDARD ISO 12181-1 First edition 2011-04-01 Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness Spécification géométrique des produits (GPS)
More information