2018 PRICE BOOK SOLID BRASS COLLECTION

Transcription

1 2018 PRICE BOOK SOLID BRASS COLLECTION

2 OUR FINISHES Items sold in finishes other than Satin Nickel (4), and Dark Oil Rubbed (8) are made to order and as such are not returnable. See Returns Policy on page 5 for details. See our website or catalog for representations of our finishes. FINISH ASHLEY US BHMA Satin Nickel Dark Oil Rubbed 8 10B 613 Polished Chrome Polished Nickel 4B Satin Chrome 2 26D 626 Polished Brass Light Oil Rubbed Satin Brass 3S Meridian (3100) lever Bauhaus (1250) lever Vallea (1910) lever Hampton (4000) lever Apollo (4500) lever Challenger (6000) lever Chesterfield (1700) lever Centaur (3490) lever Bellagio (1550) lever Geo (1460) lever Shropshire (8000) lever Century (1950) lever Claros (1970) lever Churchill (5000) lever Chiltern (1600) lever Volo (1951) lever Atlas (3750) lever Chester (2000) lever Everest (7100) lever Colonial (4900) lever Windsor (9000) knob Carlisle (6600) knob Ascot (9200) knob 2 TOLL FREE

3 TABLE OF CONTENTS TERMS & CONDITIONS OF SALE RETURNS POLICY WARRANTY ORDERING GUIDE LEVERS KNOBS LEVERS ON ROSE Rose with Concealed Fixing / 13 Rose with Exposed Fixing / 14 Flat Rose with Exposed Fixing / 16 Deadbolts / 17 Privacy Bolts / 17 CITY COLLECTION Mortise Entrysets / 18 Tubular Entrysets & Deadbolts / 19 Passage & Privacy Sets / 20 Multipoint / 22 RECTANGULAR SUITE Mortise Entrysets / 25 Tubular Entrysets & Deadbolts / 26 Passage & Privacy Sets / 28 Multipoint / 30 ARCHED SUITE Mortise Entrysets / 33 Tubular Entrysets & Deadbolts / 34 Passage & Privacy Sets / 36 Multipoint / 38 SPECIALTY DOOR HARDWARE Edge Pulls, Flush Pulls, Door Stops / 40 Sliding & Pocket Door Hardware / 41 Pull Handles / 42 Solid Brass Hinges / 43 MORTISE LOCK OPTIONS ANSI F12 Entry Accurate 9148B Lock Latch bolt by key outside and lever either side unless outside lever is locked by toggle action stop Deadbolt by key outside and turn piece inside Turning inside lever retracts latch and deadbolt simultaneously, outside lever remains locked until manually unlocked by toggle ANSI F13 Dormitory Accurate 9124B Lock Latch bolt by lever either side Deadbolt by key outside and turn piece inside A turn of inside lever retracts latch and deadbolt simultaneously, automatically unlocking outside lever. 3

4 T E R M S & C O N D I T I O N S TERMS & CONDITIONS OF SALE Terms Net 30 (subject to credit check and account approval). A monthly finance charge, computed at a periodic rate of 18% will be added to all past due accounts. The amount of credit we extend to a customer is subject to change or limitation at any time, either before or after delivery of any part thereof, of an order. Payment in advance may be required prior to delivery. If a customer s account is in arrears, we shall have the right, in addition to all other legal remedies and without prejudice to any other of our rights, to defer further shipments until payment is received. We reserve the right to ship on a C.O.D. basis when considered necessary. All goods supplied remain the property of Ashley Norton Inc. until paid in full; provided, however, that risk of loss for such items shall be borne entirely by the Buyer upon delivery of such goods by Ashley Norton Inc. (F.O.B. Pompton Plains, NJ) as detailed below. All accounts that are deemed consistently problematic in the sole discretion of Ashley Norton Inc. including but not limited to untimely payments, excessive ordering errors or excessive returns are subject to closure at Ashley Norton Inc. s discretion. Prices All prices are subject to change without prior notice. All orders accepted will be priced according to the prevailing price at time of shipment. Orders delayed due to on hold account status will be charged at the price effective on date of shipment. All prices are exclusive of all local, state and federal taxes. Wherever applicable, such taxes will be added to the invoice as a separate charge to be paid by the Buyer. Freight All sales are F.O.B. Pompton Plains, New Jersey and will be shipped direct to our distributors. All orders will be shipped prepaid and freight charges added to the invoice. Ashley Norton does not quote freight. Ashley Norton Inc. will ship all orders via a carrier chosen by Ashley Norton Inc. Upon delivery to the transportation company, the Buyer assumes full risk for loss or damage in transit and shall indemnify and hold Ashley Norton Inc. harmless from any claims for loss of or damage to goods following delivery by Ashley Norton Inc. to the carrier. Claims for loss or damaged shipments must be made promptly by the customer against the carrier. Claims Any claims for shortages must be made in writing within 14 days from date of invoice. Any claims for defective merchandise or billing errors must be made in writing within 30 days from date of invoice. No claim will be allowed for work or modifications done by others, for incidental or consequential damages, or for other expenditures. The liability of Ashley Norton Inc., is limited to its obligation to repair or replace defective goods as set forth in our warranty. 4 TOLL FREE

5 TERMS & CONDITIONS OF SALE Minimum Order Minimum order value of $75 net. A handling charge of $15 net will apply to orders below $75 net. Ashley Norton reserves the right to refuse any order in whole or in part. Specifications Sizes and designs may be changed without notification. Ashley Norton Inc reserves the right to discontinue products without prior notice. Order Cancellations & Changes Ashley Norton Inc will attempt to comply with faxed or ed order changes or cancellations, however, we cannot guarantee that they can be accomplished before shipment. Handling charges will apply if goods had been manufactured prior to processing a change or cancellation request. Orders for nonstock or special items cannot be cancelled or changed without consent from Ashley Norton Inc. Where items have not been manufactured, we will endeavor to action a cancellation or change request. However, where items have been manufactured any cancellation or change is subject to approval by Ashley Norton Inc. and will result in a handling charge of up to the full order value. Disputes All disputes relating in any way to these Terms and Conditions of Sale shall be resolved in an appropriate court located in the State of New Jersey, and such disputes shall be governed entirely by New Jersey law. RETURNS POLICY Returned goods will not be accepted without prior written authorization. Minimum net amount for return of hardware is $25.00 except in case of Ashley Norton error. All requests for RGAs must be made in writing within 60 days of original invoice date. RGA numbers are valid for 30 days from date of issuance and will not be re-issued. A minimum 30% restock charge plus freight will apply to current SATIN NICKEL (4) or DARK OIL RUBBED (8) items returned in original condition and packaging and having a factory issued RGA number. Items sold in other finishes, including split finishes are not returnable. If a factory defect is claimed, an RGA will be issued for inspection purposes only. Any credit due will be determined upon inspection; approved returns will be credited. All returns must be shipped freight pre-paid. COD returns will be refused. ITEMS SOLD IN FINISHES OTHER THAN SATIN NICKEL (4) OR DARK OIL RUBBED (8) ARE NON-RETURNABLE. CUSTOM ITEMS AND SETS PRODUCED IN SPLIT FINISHES ARE NOT RETURNABLE. Special order or discontinued items will not be accepted for return except in case of manufacturing error. 5

6 WARRANTY W A R R A N T Y Mechanical Warranty Ashley Norton Inc. extends a 10 year mechanism warranty to the original residential purchaser, providing the product has been installed in strict accordance with our installation instructions. The only obligation of Ashley Norton Inc. will be to repair or replace the defective product or parts upon presentation, together with proof of purchase dated within the warranty period. We assume no liability for any labor charges regarding the removal or reinstallation of the products; nor will we cover any freight, postage, or handling expense. This warranty does not cover damage caused by accident, misuse, abuse, tampering, extreme climatic conditions, improper installation or products used in commercial applications. Finish Warranty - Internal Use When used internally, Ashley Norton Inc. extends warranties as indicated below to the original residential purchaser and limited to the location where the product was originally installed. The finish warranty does not cover scratches, abuse, mis-use, accident, external use, or where the product has been used in a commercial application. WARRANTY FINISH CODE FINISH (INTERIOR USE ONLY) 2 Satin Chrome 10 years 3 Polished Brass 10 years 3S Satin Brass 10 years 4 Satin Nickel 10 years 4B Polished Nickel No warranty 6 Light Oil Rubbed No warranty 8 Dark Oil Rubbed No warranty 9 Polished Chrome 10 years Our Dark Oil Rubbed (8) and Light Oil Rubbed (6) patinas are living finishes and may lighten, highlight, oxidize or rub off in places due to frequency of use; therefore, such events do not constitute a defect. Our Polished Nickel (4B) finish is not lacquered and may tarnish due to environmental exposure. Thus Ashley Norton Inc., cannot guarantee our Dark Oil Rubbed (8), Light Oil Rubbed (6) or Polished Nickel (4B) finishes and therefore, Ashley Norton Inc. will not have any obligation to repair or replace such finishes under this warranty. Finish Warranty - External Use Lacquered finishes will deteriorate when exposed to the atmosphere, particularly salt air, direct sunlight and pollution. Plated finishes will endure these conditions longer than lacquered finishes, however even these will not remain unaffected by the environment. Our oil rubbed finishes are living finishes and will age naturally. Ashley Norton cannot guarantee finishes where used externally. Exclusion of Incidental and Consequential Damages In no event shall Ashley Norton be liable for any incidental or consequential damages arising from the sale or use of our products. We assume no liability for any labor charges regarding the removal or reinstallation of the products; nor will we cover any freight, postage, or handling expense related to the product. The only obligation upon Ashley Norton Inc. will be to repair or replace the defective product or parts upon presentation, together with proof of purchase dated within the warranty period. 6 TOLL FREE

7 ORDERING GUIDE Most combinations of lever, knob, escutcheon and finish may be combined to create a unique piece for your home or project. Our staff will be delighted to assist if you have any questions regarding compatibility of levers/ escutcheons or other technical questions. Some frequently requested information is presented below. Product Code Construction We have provided guides throughout the catalog which explain how to construct part numbers for specific combinations of levers, plates and finishes. Should you require any assistance, please contact us. Handing Guide Door handing is always determined from outside of the room or home. The side of the door that the hinges are on determines the handing of the door. For mortise sets, we need to know the swing direction of the door. Most doors swing in, but if the door swings outwards, designate this as reverse swing. O R D E R I N G G U I D E L = Left Hand R = Right Hand LHR = Left Hand Reverse (needed for mortise sets only) RHR = Right Hand Reverse (needed for mortise sets only) Backset, Strike, Door Thickness Our hardware is supplied with accessories to suit a typical door. However, a number of options are available to suit particular circumstances. Standard Option Please call to verify suitability for any doors thicker than Tubular Passage / Privacy Sets Door thickness 1 ³/8-1 ¾ (a) Up to: 3 (passage); (privacy) Backset 2 ³/8 2 ¾ Strike Full Lipped Strike T Strike Deadbolts Door thickness 1 ¾ Up to: 3 (standard); 2 ¼ (double-keyed) Backset 2 ³/8 2 ¾ Tubular Entrysets Door thickness 1 ¾ Up to 3 - see footnote (b) below Backset 2 ³/8 2 ¾ Strike Full Lipped Strike T Strike Mortise Entrysets Door thickness 1 ¾ Up to 3 (upcharge applies) Backset 2 ¾ Strike Mortise strike Mortise strike Multipoint Trim Door thickness 1 ¾ Up to 2 ¼ (inquire for thicker doors) Strike Not included Not included (a) Flat plates require a minimum of 1 ¾ door thickness L OUTSIDE VIEW - OUTSWING DOOR LHR OUTSIDE VIEW VIEWED FROM THE TOP Inside R RHR (b) Max. thickness for double keyed entryset is 2 ¼. Max. thickness for tubular gripset is L Left Handed R Right Handed Outside 7

8 LEVER OPTIONS 1 ¼ 1 ¾ 7 8 Meridian (3100) lever ½ 2 ¼ Apollo (4500) lever ½ ½ 2 ¼ Bellagio (1550) lever 4 ¾ ½ ¾ 1 ¼ Claros (1970) lever 4 ¾ 1 8 ¾ Atlas (3750) lever 4 ½ TOLL FREE

9 LEVER OPTIONS 1 ½ Bauhaus (1250) lever ¼ 7 8 Challenger (6000) lever ¾ 2 4 ¼ 7 8 Geo (1460) lever 1 ¼ Churchill (5000) lever 1 ¼ ¼ 1 ¼ Chester (2000) lever 9

10 LEVER OPTIONS ¼ Vallea (1910) lever ¼ Chesterfield (1700) lever Shropshire (8000) lever ¼ Chiltern (1600) lever Everest (7100) lever TOLL FREE

11 LEVER OPTIONS ¾ 1 ½ 2 ¼ ¼ Hampton (4000) lever ¼ Centaur (3490) lever 1 ¼ 1 ¾ 4 ½ 1 Century (1950) lever ¾ Volo (1951) lever Colonial (4900) lever 4 ¾ 11

12 KNOB OPTIONS Windsor (9000) knob 1 ½ 1 ½ Carlisle (6600) knob ¼ Ascot (9200) knob 12 TOLL FREE

13 ROSE WITH CONCEALED FIXING Please insert your specific selections into the template to create the product you require. Rose Lever Function Handing Finish Backset pages 8-11 L Left R Right page 2 For example to order an item with the diameter rose (AN), the Atlas (3750) lever in a Single Dummy (40) function for a left hand door (L), in Satin Nickel (4) finish, use product code: AN L ¾ Available with levers only (roses may not be combined with knobs) Handing not required for passage and privacy sets Specify door thickness and backset (2 3 8 or 2 ¾ ) Maximum door thickness: 3 (passage); (privacy) TA Rose Diameter: AN Rose Diameter: RE Rose x TUBULAR PASSAGE TUBULAR PRIVACY (PIN) SINGLE DUMMY FULL DUMMY TA ROSE 2 3 8" DIA. ROSE AN ROSE 2 3 8" DIA. ROSE RE ROSE TA 30 FUNCTION AN 30 FUNCTION TA 20 FUNCTION AN 20 FUNCTION TA 40 FUNCTION AN 40 FUNCTION TA 42 FUNCTION SN (4) / DORB (8) $ $ $83.00 $ OTHER FINISHES $ $ $91.30 $ AN 42 FUNCTION SN (4) / DORB (8) $ $ $83.00 $ OTHER FINISHES $ $ $91.30 $ LEVERS ON ROSE / CONCEALED FIXING x ROSE RE 30 FUNCTION RE 20 FUNCTION RE 40 FUNCTION RE 42 FUNCTION SN (4) / DORB (8) $ $ $91.00 $ OTHER FINISHES $ $ $ $ Available with any lever shown on pages Due to installation technicalities, roses may not be combined with knobs. 13

14 ROSE WITH EXPOSED FIXING Please insert your specific selections into the template to create the product you require. Rose Lever/Knob Function Handing Finish Backset pages 8-12 L Left R Right page ¾ For example to order an item with the x rose (BC), the Bellagio (1550) lever in a privacy (20) function for a left hand door (L), in Polished Nickel (4B) finish, use product code: BC L.4B BT, BA and BC sets available with levers only (roses may not be combined with knobs) UB escutcheon may be combined with levers or knobs Specify door thickness and backset (2 3 8 or 2 ¾ ) Maximum door thickness: 3 (passage); (privacy) BT Rose dia May only be combined with levers Handing required for all sets BA Rose dia May only be combined with levers Handing required for all sets BC Rose x May only be combined with levers Handing required for all sets UB Escutcheon x May be combined with levers or knobs Handing not required for passage or privacy sets 14 TOLL FREE

15 ROSE WITH EXPOSED FIXING TUBULAR PASSAGE TUBULAR PRIVACY (PIN) SINGLE DUMMY FULL DUMMY BT ROSE DIA. ROSE BT 30 FUNCTION BT 20 FUNCTION BT 40 FUNCTION BT 42 FUNCTION SN (4) / DORB (8) $ $ $68.00 $ OTHER FINISHES $ $ $74.80 $ BA ROSE DIA. ROSE BA 30 FUNCTION BC ROSE x ROSE BC 30 FUNCTION BA 20 FUNCTION BC 20 FUNCTION BA 40 FUNCTION BC 40 FUNCTION BA 42 FUNCTION SN (4) / DORB (8) $ $ $68.00 $ OTHER FINISHES $ $ $74.80 $ BC 42 FUNCTION LEVERS ON ROSE / EXPOSED FIXING SN (4) / DORB (8) $ $ $68.00 $ OTHER FINISHES $ $ $74.80 $ UB PLATE OR KNOB x KNOB 3 3 8" x 2 ½" UB 30 FUNCTION UB 20 FUNCTION UB 40 FUNCTION SN (4) / DORB (8) $ $ $77.00 OTHER FINISHES $ $ $84.70 BT, BA and BC roses may be combined with any lever shown on pages UB escutcheon can be combined with any lever or knob shown on pages For full dummy with UB plate, order 1 x LH + 1 x RH single dummy. 15

16 FLAT ROSE WITH EXPOSED FIXING Please insert your specific selections into the template to create the product you require. Rose Lever Function Handing Finish Backset pages 8-11 L Left R Right page ¾ For example to order an item with the diameter flat rose (FR), the Bauhaus (1250) lever in a Single Dummy (40) function for a left hand door (L), in Satin Nickel (4) finish, use product code: FR L.4 Available with levers only (roses may not be combined with knobs) Handing required for all sets Specify door thickness and backset (2 3 8 or 2 ¾ ) Maximum door thickness: 3 (passage); (privacy) Minimum door thickness 1 ¾ required FS Rose x FR Rose dia TUBULAR PASSAGE TUBULAR PRIVACY (PIN) SINGLE DUMMY FULL DUMMY FR ROSE DIA. ROSE FS ROSE x ROSE FR 30 FUNCTION FS 30 FUNCTION FR 20 FUNCTION FS 20 FUNCTION FR 40 FUNCTION FS 40 FUNCTION FR 42 FUNCTION SN (4) / DORB (8) $ $ $91.00 $ OTHER FINISHES $ $ $ $ FS 42 FUNCTION SN (4) / DORB (8) $ $ $91.00 $ OTHER FINISHES $ $ $ $ LEVERS ON FLAT ROSE / EXPOSED FIXING Available with any lever shown on pages Due to installation technicalities, roses may not be combined with knobs. Minimum 1 ¾ door thickness required for flat roses. 16 TOLL FREE

17 DEADBOLTS Round Deadbolt Diameter: SATIN NICKEL (4) OTHER FUNCTION DARK ORB (8) FINISHES DB4100 Single Keyed $ $ DB4200 Double Keyed $ $ DB4700 Patio Deadbolt $98.00 $ Traditional Deadbolt Diameter: SATIN NICKEL (4) OTHER FUNCTION DARK ORB (8) FINISHES DB4190 Single Keyed $ $ DB4290 Double Keyed $ $ DB4790 Patio Deadbolt $98.00 $ Contemporary Round Deadbolt Diameter: SATIN NICKEL (4) OTHER FUNCTION DARK ORB (8) FINISHES DB4120 Single Keyed $ $ DB4200 Double Keyed $ $ DB4720 Patio Deadbolt $98.00 $ Contemporary Square Deadbolt x SATIN NICKEL (4) OTHER FUNCTION DARK ORB (8) FINISHES DB4130 Single Keyed $ $ DB4230 Double Keyed $ $ DB4730 Patio Deadbolt $ $ PRIVACY BOLTS C586 Privacy Bolt Diameter: SN (4) / DORB (8): $62.00 OTHER FINISHES: $68.20 V4043 Privacy Bolt Diameter: SN (4) / DORB (8): $68.00 OTHER FINISHES: $74.80 RE4043 Privacy Bolt x SN (4) / DORB (8): $72.00 OTHER FINISHES: $

18 CITY COLLECTION - MORTISE ENTRYSETS Please insert your specific selections into the template to create the product you require. Escutcheon Lever/Knob Function Handing Finish Backset pages 8-12 For example to order an item with 17 x grip entry escutcheon (UBSGL), the Meridian (3100) lever in an Entry (10) function for a left hand door (L), in Satin Nickel (4) finish, use product code: UBSGL L.4 and specify backset Available with any lever or knob Supplied with Accurate 9148B lock (specify or 2 ¾ backset). Other locks available on request (upcharge may apply) For narrow or extended backsets, please quote request including quantities to custom@ashleynorton.com Specify door thickness and handing including door swing (e.g. Left, Right, Left Reverse, Right Reverse) For doors or thicker, a $100 list upcharge will apply Maximum door thickness is 3 L LHR R RHR page 2 2 ¾ UBMOR UBSGL MORTISE ENTRY (1) ANSI F12 MORTISE DORMITORY (1) ANSI F13 OR KNOB x KNOB 10 x 2 ½" GRIP x LEVER OR GRIP x KNOB EXTERIOR: 17 x 2 ½" INTERIOR: 10 x 2 ½" UBMOR / 12 FUNCTION UBSGL / 10 FUNCTION UBMOR / 13 FUNCTION UBSGL / 11 FUNCTION UBMOR / 22 FUNCTION SN (4) / DARK ORB (8) $ $ $ OTHER FINISHES $ $ $ UBSGL / 42 FUNCTION CITY COLLECTION / MORTISE ENTRYSET SN (4) / DARK ORB (8) $ $ $ OTHER FINISHES $ $ $ (1) See page 3 for explanation of these locks. 18 TOLL FREE

19 CITY COLLECTION - TUBULAR ENTRYSETS Please insert your specific selections into the template to create the product you require. Escutcheon Lever/Knob Function Handing Finish Backset pages 8-12 L LHR R RHR page 2 Available with any lever or knob Suitable for doors with standard 5 ½ center to center Supplied with tubular latch and deadbolt Specify door thickness, handing and backset (2 3 8 or 2 ¾ ) Maximum door thickness for UBLES entryset and deadbolts: 3 for single keyed or patio, 2 ¼ for double-keyed. Maximum door thickness for UBTUB (grip x lever/knob entryset): ¾ UBTUB UBLES 4170 Deadbolt TUBULAR ENTRY TUBULAR PATIO DOUBLE ENTRY FULL DUMMY OR KNOB x KNOB 10 x 2 ½" GRIP x LEVER OR GRIP x KNOB EXTERIOR: 17 x 2 ½" INTERIOR: 10 x 2 ½" UBLES / 50 FUNCTION UBLES / 43 FUNCTION UBLES / 52 FUNCTION UBLES / 42 FUNCTION SN (4) / DORB (8) $ $ $ $ OTHER FINISHES $ $ $ $ UBTUB / 50 FUNCTION UBTUB / 42 FUNCTION SN (4) / DORB (8) $ $ OTHER FINISHES $ $ CITY COLLECTION / TUBULAR ENTRYSET & DEADBOLTS DEADBOLT 2 ½" x 2 ½" SN (4) / DORB (8) $ $ $ OTHER FINISHES $ $ $ Available with any lever or knob shown on pages

20 CITY COLLECTION - PASSAGE & PRIVACY Please insert your specific selections into the template to create the product you require. Escutcheon Lever/Knob Function Handing Finish Backset pages 8-12 L Left R Right page 2 For example to order an item with the x escutcheon (UB), the Bellagio (1550) lever in a Single Dummy (40) function for a left hand door (L), in Satin Chrome (2) finish, use product code: UB L.2 UB plate may be combined with any lever or knob RE and BC roses may be combined with any lever, but not with knobs Specify door thickness and backset (2 3 8 or 2 ¾ ) Maximum door thickness: 3 (passage); (privacy) ¾ UB Escutcheon x May be combined with levers or knobs Handing not required for passage or privacy sets RE Rose x May only be combined with levers Handing not required for passage or privacy sets BC Rose x May only be combined with levers Handing required for all sets 20 TOLL FREE

21 CITY COLLECTION - PASSAGE & PRIVACY TUBULAR PASSAGE TUBULAR PRIVACY (PIN) SINGLE DUMMY FULL DUMMY OR KNOB x KNOB 3 3 8" x 2 ½" Exposed Screws x 2 1 2" Concealed Screws UB 30 FUNCTION RE 30 FUNCTION UB 20 FUNCTION RE 20 FUNCTION UB 40 FUNCTION SN (4) / DORB (8) $ $ $77.00 OTHER FINISHES $ $ $ x 2 1 2" Exposed Screws BC 30 FUNCTION BC 20 FUNCTION RE 40 FUNCTION BC 40 FUNCTION RE 42 FUNCTION SN (4) / DORB (8) $ $ $91.00 $ OTHER FINISHES $ $ $ $ BC 42 FUNCTION CITY COLLECTION / PASSAGE & PRIVACY SETS SN (4) / DORB (8) $ $ $68.00 $ OTHER FINISHES $ $ $74.80 $ UB plate can be combined with any lever or knob shown on pages RE and BC plates may only be combined with levers. For full dummy with UB plate, order 1x LH + 1x RH single dummy. 21

22 CITY COLLECTION - MULTIPOINT TRIM Please insert your specific selections into the template to create the product you require. Escutcheon Lever Function Handing Finish pages 8-11 L Left R Right page 2 For example to order an item with the 10 x 1 ¾ profile cylinder escutcheon to suit Hoppe Locks (UBEU4), the Centaur (3490) lever in an Entry (57) function for a left hand door (L), in Polished Chrome (9) finish, use product code: UBEU L.9 Inquire for any doors thicker than 2 ¼ with profile cylinder If ordering trim for locks operated by profile cylinder, lock must be centered in door (offset cylinders not available) Ashley Norton provides multipoint trim only (including cylinder and spindle). Lock and strike are not included Multipoint plates in City Collection include 2-way lever spring assist 10 2 ¾ ½ UBEU4 Suitable for Hoppe locks and similar operated using a profile cylinder 92mm CTC Lever high, cylinder low Enquire for doors thicker than 2 ¼ Screw to screw: UBUS4 Suitable for G-U locks and similar operated using an American tailpiece For Ashland locks see UBMR4 below 92mm CTC Lever high, cylinder low Screw to screw: ¾ 1 ¾ UBEG4 Suitable for G-U locks and similar operated using an American tailpiece 92mm CTC Lever low, cylinder high Screw to screw: UBMR4 Suitable for Ashland locks operated using an American tailpiece 92mm CTC Lever low, cylinder high Screw to screw: 7 ¼ 1 ¾ 1 ¾ 22 TOLL FREE

23 CITY COLLECTION - MULTIPOINT TRIM REFERENCE KEYED ENTRY PATIO FULL DUMMY SEMI- PASSIVE PASSIVE PROFILE CYLINDER LEVER HIGH HOPPE LOCKS 10 x 13 4" 92mm CTC JELD-WEN (1), KOLBE & KOLBE, KFV, LINCOLN, LOEWEN, NORCO, PEACHTREE, SEMCO, WEATHER SHIELD (1), SIERRA PACIFIC (2), WINDSOR, VETTER UBEU4 57 FUNCTION UBEU4 58 FUNCTION FIXED FIXED FIXED UBEU4 42 FUNCTION UBEU4 38 FUNCTION UBEU4 39 FUNCTION INTERIOR USE ONLY SN (4) / DORB (8) $ $ $ Contact Contact OTHER FINISHES $ $ $ us us US TAILPIECE LEVER HIGH G-U LOCKS 10 x 13 4" 92mm CTC PELLA MILGARD FIXED FIXED FIXED UBUS4 55 FUNCTION UBUS4 53 FUNCTION UBUS4 42 FUNCTION UBUS4 38 FUNCTION UBUS4 39 FUNCTION INTERIOR USE ONLY SN (4) / DORB (8) $ $ $ Contact Contact OTHER FINISHES $ $ $ us us US TAILPIECE LEVER LOW G-U LOCKS 10 x 13 4" 92mm CTC EAGLE, HURD (ENERGY SAVER LINE), BILTBEST UBEG4 55 FUNCTION UBEG4 53 FUNCTION FIXED FIXED FIXED UBEG4 47 FUNCTION UBEG4 38 FUNCTION UBEG4 39 FUNCTION INTERIOR USE ONLY CITY COLLECTION / MULTIPOINT TRIM SN (4) / DORB (8) $ $ $ Contact Contact OTHER FINISHES $ $ $ us us US TAILPIECE LEVER LOW ASHLAND LOCKS 10 x 13 4" PLATES 92mm CTC CARADCO, JELD-WEN (1), MARVIN, PGT, WEATHER SHIELD (1) UBMR4 55 FUNCTION UBMR4 53 FUNCTION FIXED FIXED FIXED UBMR4 47 FUNCTION UBMR4 38 FUNCTION UBMR4 39 FUNCTION SN (4) / DORB (8) $ $ $ Contact $ OTHER FINISHES $ $ $ us $ (1) JELD-WEN and Weather Shield doors may use either Hoppe locks or Ashland locks depending on product range and date of manufacture. Verify before ordering. (2) Sierra Pacific Wisconsin Product (formerly Hurd) uses G-U locks, please see third row of table. Door manufacturers listed for reference only and subject to change. Please see for updated list. Multipoint escutcheons are suitable for use with levers only. 23

24 Rectangular Suite

25 RECTANGULAR SUITE - MORTISE ENTRYSETS Please insert your specific selections into the template to create the product you require. Escutcheon Lever/Knob Function Handing Finish Backset pages 8-12 L LHR R RHR page 2 2 ¾ For example to order an item with 18 x 3 grip entry escutcheon (SQSGL), the Churchill (5000) lever in an Entry (10) function for a left hand door (L), in Satin Nickel (4) finish, use product code: SQSGL L.4 and specify backset Available with any lever or knob Supplied with Accurate 9148B lock (specify or 2 ¾ backset). Other locks available on request (upcharge may apply) For narrow or extended backsets, please quote request including quantities to custom@ashleynorton.com Specify door thickness and handing including door swing (e.g. Left, Right, Left Reverse, Right Reverse) For doors or thicker, a $100 list upcharge will apply Maximum door thickness is SQMOR SQSGL MORTISE ENTRY (1) ANSI F12 MORTISE DORMITORY (1) ANSI F13 FULL DUMMY OR KNOB x KNOB 13 x 2 1 2" PLATES SQMOR / 12 FUNCTION SQMOR / 13 FUNCTION SQMOR / 22 FUNCTION SN (4) / DARK ORB (8) $ $ $ OTHER FINISHES $ $ $ GRIP x LEVER OR GRIP x KNOB EXTERIOR: 18 x 3" INTERIOR: 11 x SQSGL / 10 FUNCTION SQSGL / 11 FUNCTION SQSGL / 42 FUNCTION SN (4) / DARK ORB (8) $ $ $ OTHER FINISHES $ $ $ (1) See page 3 for explanation of these locks. RECTANGULAR SUITE / MORTISE ENTRYSET 25

26 RECTANGULAR SUITE - TUBULAR ENTRYSETS Please insert your specific selections into the template to create the product you require. Escutcheon Lever/Knob Function Handing Finish Backset pages 8-12 L LHR R RHR page ¾ For example to order an item with the 18 x 3 grip entry escutcheon (SQTUB), the Chester (2000) lever in an Entry (50) function for a left hand door (L), in Dark Oil Rubbed (8) finish, use product code: SQTUB L.8 and specify backset Available with any lever or knob Suitable for doors with standard 5 ½ center to center Supplied with tubular latch and deadbolt Specify door thickness, handing and backset (2 3 8 or 2 ¾ ) Maximum door thickness for SQTUB (grip x lever/knob entryset): Maximum door thickness for SQLES entryset and deadbolts: 3 for single keyed or patio, 2 ¼ for double-keyed SQTUB SQLES Deadbolt 26 TOLL FREE

27 RECTANGULAR SUITE - TUBULAR ENTRYSETS TUBULAR ENTRY TUBULAR PATIO DOUBLE ENTRY FULL DUMMY OR KNOB x KNOB 13 x 2 ½" PLATES GRIP x LEVER OR GRIP x KNOB EXTERIOR: 18 x 3" INTERIOR: 11 x 2 ½" DEADBOLT 3 x 2 ½" SQLES / 50 FUNCTION SQLES / 43 FUNCTION SQLES / 52 FUNCTION SQLES / 42 FUNCTION SN (4) / DORB (8) $ $ $ $ OTHER FINISHES $ $ $ $ SQTUB / 50 FUNCTION SQTUB / 42 FUNCTION SN (4) / DORB (8) $ $ OTHER FINISHES $ $ RECTANGULAR SUITE / TUBULAR ENTRYSET & DEADBOLTS SN (4) / DORB (8) $ $ $ OTHER FINISHES $ $ $ Available with any lever or knob shown on pages

28 RECTANGULAR SUITE - PASSAGE & PRIVACY Please insert your specific selections into the template to create the product you require. Escutcheon Lever/Knob Function Handing Finish Backset pages 8-12 L Left R Right page ¾ For example to order an item with the 5 x escutcheon (SQ), the Hampton (4000) lever in a Single Dummy (40) function for a left hand door (L), in Satin Chrome (2) finish, use product code: SQ L.2 Available with any lever or knob Handing not required for tubular passage or privacy sets Specify door thickness and backset (2 3 8 or 2 ¾ ) Maximum door thickness: 3 (passage); (privacy) SQ SE 1 ½ SQ TOLL FREE

29 RECTANGULAR SUITE - PASSAGE & PRIVACY TUBULAR PASSAGE TUBULAR PRIVACY (PIN) TUBULAR PRIVACY (BOLT) SINGLE DUMMY OR KNOB x KNOB 5 x 2 ½" PLATES SQ 30 FUNCTION OR KNOB x KNOB 11 x 2 ½" PLATES SE 30 FUNCTION SQ 20 FUNCTION SE 20 FUNCTION SQ587 PRIVACY BOLT SE 26 FUNCTION SQ 40 FUNCTION SN (4) / DORB (8) $ $ $74.00 $81.00 OTHER FINISHES $ $ $81.40 $89.10 SE 40 FUNCTION SN (4) / DORB (8) $ $ $ $ OTHER FINISHES $ $ $ $ RECTANGULAR SUITE / PASSAGE & PRIVACY SETS These escutcheons can be combined with any lever or knob shown on pages For full dummy with SQ and SE plates, order 1x LH + 1x RH single dummy. 29

30 RECTANGULAR SUITE - MULTIPOINT TRIM Please insert your specific selections into the template to create the product you require. Escutcheon Lever Function Handing Finish pages 8-11 L Left R Right page 2 For example to order an item with the x 1 ¾ profile cylinder escutcheon to suit Hoppe Locks (SQEU4), the Churchill (5000) lever in an Entry (57) function for a left hand door (L), in Polished Chrome (9) finish, use product code: SQEU L.9 Ashley Norton has upgraded all of our multipoint handlesets to include a spring assist. When comparing with our 2015 Solid Brass catalog, please note that the plate width has increased from 1 ½ to 1 ¾ and the last digit of the escutcheon has been changed from '3' to '4'. Should you require the 1 ½ wide plate to match existing hardware, please contact us. Inquire for any doors thicker than 2 ¼ with profile cylinder For locks operated by profile cylinder, lock must be centered in door (offset cylinders not available) Ashley Norton provides multipoint trim only (including cylinder and spindle). Lock and strike are not included ¾ ½ SQEU4 Suitable for Hoppe locks and similar operated using a profile cylinder 92mm CTC Lever high, cylinder low Enquire for doors thicker than 2 ¼ Screw to screw: SQUS4 Suitable for G-U locks and similar operated using an American tailpiece For Ashland locks see SQMR4 below 92mm CTC Lever high, cylinder low Screw to screw: ¾ 1 ¾ SQEG4 Suitable for G-U locks and similar operated using an American tailpiece 92mm CTC Lever low, cylinder high Screw to screw: SQMR4 Suitable for Ashland locks operated using an American tailpiece 92mm CTC Lever low, cylinder high Screw to screw: 7 ¼ 1 ¾ TOLL FREE

31 RECTANGULAR SUITE - MULTIPOINT TRIM REFERENCE KEYED ENTRY PATIO FULL DUMMY SEMI- PASSIVE PASSIVE PROFILE CYLINDER LEVER HIGH HOPPE LOCKS 10 1/8 x 13 4" PLATES 92mm CTC JELD-WEN (1), KOLBE & KOLBE, KFV, LINCOLN, LOEWEN, NORCO, PEACHTREE, SEMCO, WEATHER SHIELD (1), SIERRA PACIFIC (2), WINDSOR, VETTER SQEU4 57 FUNCTION SQEU4 58 FUNCTION FIXED FIXED SQEU4 42 FUNCTION FIXED SQEU4 38 FUNCTION SQEU4 39 FUNCTION INTERIOR USE ONLY SN (4) / DORB (8) $ $ $ Contact Contact OTHER FINISHES $ $ $ us us US TAILPIECE LEVER HIGH G-U LOCKS 10 1/8 x 13 4" PLATES 92mm CTC US TAILPIECE LEVER LOW G-U LOCKS 10 1/8 x 13 4" PLATES 92mm CTC PELLA MILGARD EAGLE, HURD (ENERGY SAVER LINE), BILTBEST SQUS4 55 FUNCTION SQEG4 55 FUNCTION SQUS4 53 FUNCTION SQEG4 53 FUNCTION SQUS4 42 FUNCTION FIXED FIXED SQEG4 47 FUNCTION SQUS4 38 FUNCTION SQEG4 38 FUNCTION SQUS4 39 FUNCTION INTERIOR USE ONLY SN (4) / DORB (8) $ $ $ Contact Contact OTHER FINISHES $ $ $ us us SQEG4 39 FUNCTION INTERIOR USE ONLY SN (4) / DORB (8) $ $ $ Contact Contact OTHER FINISHES $ $ $ us us FIXED FIXED FIXED FIXED RECTANGULAR SUITE / MULTIPOINT TRIM US TAILPIECE LEVER LOW ASHLAND LOCKS 10 1/8 x 17/8" PLATES 92mm CTC CARADCO, JELD-WEN (1), MARVIN, PGT, WEATHER SHIELD (1) SQMR4 55 FUNCTION SQMR4 53 FUNCTION FIXED FIXED SQMR4 47 FUNCTION FIXED SQMR4 38 FUNCTION SQMR4 39 FUNCTION SN (4) / DORB (8) $ $ $ Contact $ OTHER FINISHES $ $ $ us $ (1) JELD-WEN and Weather Shield doors may use either Hoppe locks or Ashland locks depending on product range and date of manufacture. Verify before ordering. (2) Sierra Pacific Wisconsin Product (formerly Hurd) uses G-U locks, please see third row of table. Door manufacturers listed for reference only and subject to change. Please see for updated list. Multipoint escutcheons are suitable for use with levers only. 31

32 Arched Suite

33 ARCHED SUITE - MORTISE ENTRYSETS Please insert your specific selections into the template to create the product you require. Escutcheon Lever/Knob Function Handing Finish Backset pages 8-12 L LHR R RHR page 2 2 ¾ For example to order an item with 18 x 3 grip entry escutcheon (SPSGL), the Churchill (5000) lever in an Entry (10) function for a left hand door (L), in Satin Nickel (4) finish, use product code: SPSGL L.4 and specify backset Available with any lever or knob Supplied with Accurate 9148B lock (specify or 2 ¾ backset). Other locks available on request (upcharge may apply) For narrow or extended backsets, please quote request including quantities to custom@ashleynorton.com Specify door thickness and handing including door swing (e.g. Left, Right, Left Reverse, Right Reverse) For doors or thicker, a $100 list upcharge will apply Maximum door thickness is SPMOR SPSGL MORTISE ENTRY (1) ANSI F12 MORTISE DORMITORY (1) ANSI F13 FULL DUMMY OR KNOB x KNOB 13 x 2 ½" PLATES GRIP x LEVER OR GRIP x KNOB EXTERIOR: 18 x 3" INTERIOR: 13 x 2 ½" SPMOR / 12 FUNCTION SPSGL / 10 FUNCTION (1) See page 3 for explanation of these locks. SPMOR / 13 FUNCTION SPSGL / 11 FUNCTION SPMOR / 22 FUNCTION SN (4) / DARK ORB (8) $ $ $ OTHER FINISHES $ $ $ SPSGL / 42 FUNCTION SN (4) / DARK ORB (8) $ $ $ OTHER FINISHES $ $ $ ARCHED SUITE / MORTISE ENTRYSET 33

34 ARCHED SUITE - TUBULAR ENTRYSETS Please insert your specific selections into the template to create the product you require. Escutcheon Lever/Knob Function Handing Finish Backset L Left pages 8-12 R Right page 2 2 ¾ For example to order an item with the 18 x 3 grip entry escutcheon (SPTUB), the Chester (2000) lever in an Entry (50) function for a left hand door (L), in Dark Oil Rubbed (8) finish, use product code: SPTUB L.8 and specify backset Available with any lever or knob Suitable for doors with standard 5 ½ center to center Supplied with tubular latch and deadbolt Specify door thickness, handing and backset (2 3 8 or 2 ¾ ) Maximum door thickness for SPTUB (grip x lever/knob entryset): Maximum door thickness for SPLES entryset and deadbolts: 3 for single keyed or patio, 2 ¼ for double-keyed SPTUB SPLES Deadbolt 34 TOLL FREE

35 ARCHED SUITE - TUBULAR ENTRYSETS TUBULAR ENTRY TUBULAR PATIO DOUBLE ENTRY FULL DUMY OR KNOB x KNOB 13 x 2 ½" PLATES GRIP x LEVER OR GRIP x KNOB EXTERIOR: 18 x 3" INTERIOR: 13 x 2 ½" SPLES / 50 FUNCTION SPLES / 43 FUNCTION SPLES / 52 FUNCTION SPLES / 42 FUNCTION SN (4) / DORB (8) $ $ $ $ OTHER FINISHES $ $ $ $ SPTUB / 50 FUNCTION SPTUB / 42 FUNCTION SN (4) / DORB (8) $ $ OTHER FINISHES $ $ ARCHED SUITE / TUBULAR ENTRYSET DEADBOLT 4 x 2 ½" SN (4) / DORB (8) $ $ $ OTHER FINISHES $ $ $ Available with any lever or knob shown on pages

36 ARCHED SUITE - PASSAGE & PRIVACY Please insert your specific selections into the template to create the product you require. Escutcheon Lever/Knob Function Handing Finish Backset L Left pages 8-12 R Right page 2 2 ¾ For example to order an item with the 5 x oval escutcheon (OV), the Chester (2000) lever in a Single Dummy (40) function for a left hand door (L), in Satin Nickel (4) finish, use product code: OV L.4 Handing not required for tubular passage and privacy sets Specify door thickness and backset (2 3 8 or 2 ¾ ) Maximum door thickness: 3 (passage); (privacy) ¼ AR OV ½ SR SP 36 TOLL FREE

37 ARCHED SUITE - PASSAGE & PRIVACY TUBULAR PASSAGE TUBULAR PRIVACY (PIN) TUBULAR PRIVACY (BOLT) SINGLE DUMMY OR KNOB x KNOB 5 x 2 ½" PLATES OV 30 FUNCTION OV 20 FUNCTION OV 40 FUNCTION SN (4) / DORB (8) $ $ $81.00 OTHER FINISHES $ $ $89.10 OR KNOB x KNOB 4 ¼ x 23 8" PLATES OR KNOB x KNOB 7 x 2½" PLATES AR 30 FUNCTION SR 30 FUNCTION AR 20 FUNCTION SR 20 FUNCTION AR 40 FUNCTION SN (4) / DORB (8) $ $ $77.00 OTHER FINISHES $ $ $84.70 SR 40 FUNCTION SN (4) / DORB (8) $ $ $91.00 OTHER FINISHES $ $ $ ARCHED SUITE / PASSAGE & PRIVACY SETS OR KNOB x KNOB 10 x 2½" PLATES SP 30 FUNCTION SP 20 FUNCTION SP 26 FUNCTION SP 40 FUNCTION SN (4) / DORB (8) $ $ $ $ OTHER FINISHES $ $ $ $ These escutcheons can be combined with any lever or knob shown on pages For full dummy with OV, AR, SR and SP plates, order 1x LH + 1x RH single dummy. 37

38 ARCHED SUITE - MULTIPOINT TRIM Please insert your specific selections into the template to create the product you require. Escutcheon Lever Function Handing Finish L Left pages 8-11 R Right page 2 For example to order an item with the 11 ¼ x 1 ¾ profile cylinder escutcheon to suit Hoppe Locks (SPEU3), the Churchill (5000) lever in an Entry (57) function for a left hand door (L), in Polished Chrome (9) finish, use product code: SPEU L.9 Ashley Norton has upgraded all of our multipoint handlesets to include a spring assist. When comparing with our 2015 Solid Brass catalog, please note that the plate width has increased from 1 ½ to 1 ¾ and the last digit of the escutcheon has been changed from '3' to '4'. Should you require the 1 ½ wide plate to match existing hardware, please contact us. Inquire for any doors thicker than 2 ¼ with profile cylinder If ordering trim for locks operated by profile cylinder, lock must be centered in door (offset cylinders not available) Ashley Norton provides multipoint trim only (including cylinder and spindle). Lock and strike are not included 11 ¼ 1 ¾ 2 ¾ ½ SPEU4 Suitable for Hoppe locks and similar operated using a profile cylinder 92mm CTC Lever high, cylinder low Enquire for doors thicker than 2 ¼ Screw to screw: ¼ 1 ¾ SPUS4 Suitable for G-U locks and similar operated using an American tailpiece For Ashland locks see SPMR4 below 92mm CTC Lever high, cylinder low Screw to screw: ¼ SPEG4 Suitable for G-U locks and similar operated using an American tailpiece 92mm CTC Lever low, cylinder high Screw to screw: ½ SPMR4 Suitable for Ashland locks operated using an American tailpiece 92mm CTC Lever low, cylinder high Screw to screw: 7 ¼ 1 ¾ TOLL FREE

39 ARCHED SUITE - MULTIPOINT TRIM REFERENCE KEYED ENTRY PATIO FULLY DUMMY SEMI- PASSIVE PASSIVE PROFILE CYLINDER LEVEL HIGH HOPPE LOCKS 11 ¼ x 1 3 4" PLATES 92mm CTC JELD-WEN (1), KOLBE & KOLBE, KFV, LINCOLN, LOEWEN, NORCO, PEACHTREE, SEMCO, WEATHER SHIELD (1), SIERRA PACIFIC (2), WINDSOR, VETTER SPEU4 57 FUNCTION SPEU4 58 FUNCTION SPEU4 42 FUNCTION SPEU4 38 FUNCTION SPEU4 39 FUNCTION INTERIOR USE ONLY SN (4) / DORB (8) $ $ $ Contact Contact OTHER FINISHES $ $ $ us us US TAILPIECE LEVER HIGH G-U LOCKS 11 ¼ x 13 4" PLATES 92mm CTC PELLA MILGARD EAGLE, HURD (ENERGY SAVER LINE), BILTBEST SPUS4 55 FUNCTION SPUS4 53 FUNCTION SPUS4 42 FUNCTION SPUS4 38 FUNCTION SPUS4 39 FUNCTION INTERIOR USE ONLY SN (4) / DORB (8) $ $ $ Contact Contact OTHER FINISHES $ $ $ us us US TAILPIECE LEVER LOW G-U LOCKS 11 ¼ x 1 3 4" PLATES 92mm CTC SPEG4 55 FUNCTION SPEG4 53 FUNCTION SPEG4 47 FUNCTION SPEG4 38 FUNCTION SPEG4 39 FUNCTION INTERIOR USE ONLY ARCHED SUITE / MULTIPOINT TRIM SN (4) / DORB (8) $ $ $ Contact Contact OTHER FINISHES $ $ $ us us US TAILPIECE LEVER LOW ASHLAND LOCKS 11½ x1 7/8" PLATES 92mm CTC CARADCO, JELD-WEN(1), MARVIN, PGT, WEATHER SHIELD(1) SPMR4 55 FUNCTION SPMR4 53 FUNCTION SPMR4 47 FUNCTION SPMR4 38 FUNCTION SPMR4 39 FUNCTION SN (4) / DORB (8) $ $ $ Contact $ OTHER FINISHES $ $ $ us $ (1) JELD-WEN and Weather Shield doors may use either Hoppe locks or Ashland locks depending on product range and date of manufacture. Verify before ordering. (2) Sierra Pacific Wisconsin Product (formerly Hurd) uses G-U locks, please see third row of table. Door manufacturers listed for reference only and subject to change. Please see for updated list. Multipoint escutcheons are suitable for use with levers only. 39

40 EDGE PULLS, FLUSH PULLS & DOOR STOPS ¾ ¼ C1165 Edge pull x ¾ SN (4) / DORB (8): $17.00 OTHER FINISHES: $ C1820 Flush Pull C Flush Pull 4 x 2 SN (4) / DORB (8): $24.00 OTHER FINISHES: $26.40 C Flush Pull 6 x 2 SN (4) / DORB (8): $29.50 OTHER FINISHES: $ ¾ " C1850 4" Flush Pull x 1 ¾ SN (4) / DORB (8): $24.00 OTHER FINISHES: $26.40 C131 Baseboard Door Stop 3 Length SN (4) / DORB (8): $16.00 OTHER FINISHES: $17.60 C134 Goose Neck Door Stop Footprint: 2 ¼ x Height: 2" to center of rubber, 2 ½" total SN (4) / DORB (8): $27.50 OTHER FINISHES: $ TOLL FREE

41 SLIDING & POCKET DOOR HARDWARE C PRIVACY FUNCTION INCLUDES ACCURATE 2002 LOCK / PULL MINIMUM DOOR THICKNESS 1¾ SN (4) / DORB (8) $ OTHER FINISHES $ C DBL + PRIVACY FUNCTION FOR DOUBLE DOORS INCLUDES ACCURATE 2002 LOCK / PULL AND 2002 CPDS STRIKE / PULL MINIMUM DOOR THICKNESS 1¾ SN (4) / DORB (8) $ OTHER FINISHES $ Sliding/Pocket Door Hardware 7 ¾ x 2 ¼ Supplied with Accurate mortise lock Minimum door thickness 1 ¾ Maximum door thickness 2 ¼ + C PATIO FUNCTION INCLUDES ACCURATE 2002 LOCK / PULL MINIMUM DOOR THICKNESS 1¾ C DBL PATIO FUNCTION FOR DOUBLE DOORS INCLUDES ACCURATE 2002 LOCK / PULL AND 2002 CPDS STRIKE / PULL MINIMUM DOOR THICKNESS 1¾ SN (4) / DORB (8) $ OTHER FINISHES $ SN (4) / DORB (8) $ OTHER FINISHES $ POCKET DOOR HARDWARE C ¾ PASSAGE FUNCTION INCLUDES ACCURATE 2000 PULL MINIMUM DOOR THICKNESS 1¾ SN (4) / DORB (8) $ OTHER FINISHES $ C FLUSH PULL SINGLE PULL SUPPLIED NO LOCK SN (4) / DORB (8) $58.00 OTHER FINISHES $ ¼ Single Point Sliding Handle x 1 Suitable for locks with mounting holes 100mm (3.94 ) apart, with offset tailpiece Thumbturn located 31mm (1.22 ) above lower screw. Narrow (1 wide) plate makes this ideal for doors with small stiles Trim only (lock not included) SATIN NICKEL (4) OTHER FUNCTION RECTANGULAR DARK ORB (8) FINISHES Patio SLDPULL.43-OS $ $ Dummy SLDPULL.42 $ $

42 PULL HANDLES V2057 Pull V2057 can be surface mounted with four wood screws below each rose. For back to back pair, order two pulls and surface mount on both sides of door. All Item Length CTC Dia. Projection Finishes V " 8 7 8" 3 4" 3" $ V1390 Pull Back to Back Pair* Item Length CTC Width Projection All Finishes Item All Finishes V " 11" 1" x 3 4" 2 ¹ 16" $ V BTB $ V " 17" 1" x 3 4" 2 ¹ 16" $ V BTB $ *Max. door thickness for back-to-back fixing 2 ½" V1376 Pull Not available in back to back fixing Item Length CTC Dia. Projection All Finishes V " 11" 1" 2 ¹ 2" $ V " 17" 1" 2 ¹ 2" $ V1334 Deco Pull Back to Back Pair* Item Length CTC Width Projection All Finishes Item All Finishes V " 11" 1 ¼ 2" $ V BTB $ V " 17" 1 ¼ 2" $ V BTB $ *Max. door thickness for back-to-back fixing 2 ½" V1450 Apollo Pull Back to Back Pair* Item Length CTC Width Projection All Finishes Item All Finishes V ¼ 11" 1" x ½" 2 ¼ $ V BTB $ V ¼ 17" 1" x ½" 2 ¼ $ V BTB $ *Max. door thickness for back-to-back fixing 2 ½" 42 TOLL FREE

43 SOLID BRASS HINGES Ashley Norton offers hinges to complement our Solid Brass door hardware. Our plain bearing, full mortise hinges are manufactured from solid brass extrusions to current ANSI template specifications. Assorted finial tips are available. Manufactured from solid brass extrusions to ensure strength and precision tolerance. Full mortise, plain bearing hinges featuring removable grade 304 stainless steel pin to resist corrosion Template screw hole location for use with wood doors and frames Supplied as standard with button finials, other finials available Finials threaded into barrel of hinge to prevent pin from rising Hinges beveled on inside leaf to obtain tight fit when viewing in closed position We recommend that finials in Light Oil Rubbed (6) patina be ordered with hinges to allow for patina match Solid Brass Hinge HIN-F-BAL HIN-F-ACR HIN-F-STP Item No. Description Wt. /box Thickness Screws Included HIN ½ x 3 ½ Plain Bearing Hinge 1.4 lb x #10 x 1 screws per hinge HIN x 4 Plain Bearing Hinge 1.8 lb x #12 x 1 ¼ screws per hinge HIN ½ x 4 ½ Plain Bearing Hinge 2.1 lb x #12 x 1 ¼ screws per hinge Satin Nickel (4) Other Item No. Description Pricing Qty Dark ORB (8) Finishes HIN ½ x 3 ½ Plain Bearing Hinge Each $35.00 $38.50 HIN x 4 Plain Bearing Hinge Each $37.00 $40.70 HIN ½ x 4 ½ Plain Bearing Hinge Each $40.50 $44.55 HIN-F-BAL Ball Finial Pair $12.50 $13.75 HIN-F-STP Steeple Finial Pair $12.50 $13.75 HIN-F-ACR Acorn Finial Pair $12.50 $13.75 Replacement Parts HIN-F-BUT Button Finials Pair $10.00 $11.00 HIN-S-10W #10 x 1 wood screw Pack of 6 $6.00 $6.00 HIN-S-12W #12 x 1 ¼ wood screw Pack of 8 $9.00 $9.00 Hinges are sold in each but will be packed in pairs where possible. Finials are sold and packed in pairs. NRP option available, $8.00 list upcharge per hinge. 43