HAWKEYE SENSORS - HS221, HS421, HE421 AND QUICK CHECK

Transcription

1 Form 4-162, 10-15e Supersedes Form 4-162, 03-14d Sheet 1 of 20 HAWKEYE SENSORS - HS221, HS421, HE421 AND QUICK CHECK Hunter Engineering Company

2 SHEET 3 SHEET 4 SHEET 5 SHEET 6 SHEET 7 SHEET 8 SHEET 9 SHEET 10 SHEET 11 SHEET 12 SHEET 13 SHEET 14 SHEET 15 SHEET 16 SHEET 17 SHEET 18 (PDF navigation click on THUMBNAIL IMAGE to go to sheet) SHEET 19 SHEET 20 or click on SHEET DESCRIPTION in table on following page HAWKEYE SENSORS - HS221, HS421, HE421 AND QUICK CHECK REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

3 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 2 of 20 Sheet Description (PDF navigation - click on description to go to sheet) 3 POST BASE FOR FLOOR-MOUNT MODELS (FC, ML & LC) 4 FIXED COLUMN (FC) AND COMMON TRIM COVERS 5 MANUAL LIFT (ML) 6 LIFT COLUMN (LC / LZ) 7 CABINET MOUNT COLUMN (CM) 8 CABINET MOUNT COLUMN (QUICKCHECK) 9 WAxxxCM and QC CABINETS 10 WAxxxCM and QC MONITORS 11 WALL MOUNT (WM) 12 WALL MOUNT EXTENSION 13 PIT (PS & PD) / TWO-POST (FM) 14 DRIVE-THROUGH (QUICKCHECK) 15 DRIVE UNDER (QUICKCHECK) 16 HS421 AND HE421 CAMERAS 17 HS221 CAMERAS 18 HE421 ADAPTOR HANGERS, QC CART AND SPACERS 19 HE421 TARGETS 20 HS421 TARGETS AND HS421 ADAPTOR SUPPORTS ASSOCIATED PARTS DRAWING REFERENCES Parts Drawing Description Sensors Form ADAPTOR ASSEMBLIES ( ) All Hawkeye (HS) Sensors Form ICON AND PLUS REMOTE INDICATORS , , HE and HS Sensors (Optional) Form QUICKGRIP ADAPTOR All Hawkeye Elite (HE) Sensors and QuickCheck Form WA320, WT320, WA420 AND WT420 SERIES MOUNTED CABINETS HE and HS Sensors Form Form CALIBRATION BAR AND ADAPTORS WA370, WT370, WA470 AND WT470 SERIES COMPACT CABINETS HE and HS Sensors and QuickCheck HE and HS Sensors and QuickCheck Form WA380, WT380, WA480 AND WT480 SERIES LARGE CABINETS HE and HS Sensors HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

4 POST BASE FOR FLOOR-MOUNT MODELS (FC ML & LC) REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

5 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 3 of 20 Index Part Number Description Qty * POST, ELITE LC BASE (Consisting Of:) * POST ASSEMBLY, ELITE BASE (Consisting Of:) PPP* BASE, ELITE LOWER WELD PPP PANEL, ELITE HUB-REPEATER (Consisting Of:) USB REPEATER PLUS PORT ROUND HEAD MACHINE SCREW 4-40 X 1.50 LONG NUT, HEX PPP PLATE, ELITE REPEATER ACCESS SOCKET BUTTON HEAD CAP SCREW X 50 INCH PPP PLATE, ELITE COVER PLATE ASSEMBLY, ELITE LIFT CONTROL PCA, DUAL CAMERA LIFT CONTROL TRUSS HEAD MACHINE SCREW 8-32 X 1/4 PR CABLE, USB 2.0 A/B 1 METER CABLE, HS LIFT POWER ROUND HEAD MACHINE SCREW 8-32 X.50 INCH NUT, KEPS REF CAPACITOR FROM LIFT MOTOR REF BOLT, ANCHOR 1/2 X 3 3/4 INCH HEX HEAD CAP SCREW 1/2-13 X 2.00 INCH, FULL-THREAD NUT, JAM 1/ SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH PPP COVER, ELITE BASE LEFT-HAND PPP COVER, ELITE BASE RIGHT-HAND SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.75 INCH PPP SUPPORT, ELITE REPEATER WELD 1 * Lighter gauge post design components: See previous parts drawing version (4-162, 08-11a) for heavier gauge components HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

6 FIXED COLUMN (FC) AND COMMON TRIM COVERS REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

7 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 4 of 20 Index Part Number Description Qty POST ASSEMBLY, ELITE FC UPPER (Consisting Of:) PPP POST, ELITE UPPER WELD PPP PANEL, ELITE SIDE UPPER WRAPPER SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH CARRIER, ELITE WELD BRACKET, ELITE FIXED FRONT SPACER SOCKET BUTTON HEAD CAP SCREW, 1/4-20 X.75 INCH NUT, KEPS 1/ BRACKET, ELITE FIXED REAR POSITION BRACKET, ELITE FIXED REAR CLAMP HEX HEAD CAP SCREW 3/8-16 X 2.00 INCH COVER, CENTER, CM CARRIER, LEFT-HAND (Packaged with Hardware) COVER, CENTER, CM CARRIER, RIGHT-HAND (Packaged with Hardware) NAMEPLATE, HUNTER MODEL & PART (Not Illustrated) SCREW, SELF-TAPPING X.38 INCH SOCKET BUTTON HEAD CAP SCREW 5/16-18 X 1.00 INCH (Post to Base) (Not Illustr.) CAP, ASSEMBLY SMALL CAP, POST WINDOW, CAP SPACER, 1/4 HEX X 1-1/8 INCH LONG, NAMEPLATE, HAWKEYE ELITE LED 1 OR NAMEPLATE, HAWKEYE LED PCA, POSTCAP SIGN PAN HEAD MACHINE SCREW 6-19 X 1/2 INCH TRI-SHANK, FULL-THREAD PLATE, ELITE TOP CAP BACK NUT, TINNERMAN ROUND HEAD MACHINE SCREW 6-32 X.38 INCH TRUSS HEAD MACHINE SCREW, X.75 INCH SCREW, PRESS 6-32 X.38 INCH SOCKET BUTTON HEAD CAP SCREW X 3/4 INCH (Not Illustrated) WIRE ASSEMBLY, HAWKEYE POST CAP CLAMP, P CLIP 3/8 INCH ID RUBBER (Not Illustrated) NUT, KEPS 1/4-20 (Not Illustrated) NUT, KEPS 5/ COVER, ELITE, CENTER, ASSEMBLY (Includes:) DECAL, ELITE HAWKEYE (Not Illustrated) 1 OR DECAL, HS421 HAWKEYE (Not Illustrated) COVER, ELITE, RF, ASSEMBLY (Includes:) PLATE, ELITE, 4 CAM, BAFFLE, 4 CAM (Not Illustrated) NUT-SELF THREAD 1/8 STUD (Not Illustrated) COVER, ELITE, LF, ASSEMBLY (Includes items 37 and 38) COVER, ELITE, LEFT-HAND, REAR COVER, ELITE, RIGHT-HAND, REAR ROUND HEAD MACHINE SCREW 8-32 X.50 INCH ROUND HEAD MACHINE SCREW 8-32 X 3/4 INCH BEAM, ELITE, ASSEMBLY (Refer to Sheet 13 for Exploded Components) 1 * Lighter gauge post design components: See previous parts drawing version (4-162, 08-11a) for heavier gauge components HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

8 MANUAL LIFT (ML) REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

9 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 5 of 20 Index Part Number Description Qty POST, ELITE UPPER WELD 14 GA (Consisting Of:) BEARING, ELITE, 15 MM ID SNAP RING, ELITE, 15 MM 4 4* * BRACKET, ELITE SHAFT MOUNT SHAFT, ELITE LONG PULLEY, ELITE 4 INCH SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH WASHER, FLAT 1/4 TPA-W NUT, GRIP 1/ * PPP* POST, ELITE UPPER WELD CARRIER, ELITE LC/ML CARRIER, ELITE WELD NUT, GRIP 1/ PLATE, CABLE LOCK ELITE HEX HEAD CAP SCREW 1/4-20 X.75 INCH (FULL-THREAD) NUT, KEPS 1/ SPRING, ELITE, LOCK BRACKET, CABLE MOUNT BURNDY WELD 1 19** SUPPORT, CABLE MOUNT LOCK SPACER, ELITE ROLLER ROLLER, ELITE HEM 4 22 TR50 BEARING HOLDER, ELITE ROLLER EXCENTRIC SOCKET HEAD CAP SCREW 3/8-16 X 1.75 INCH SCREW, SELF-TAPPING X.38 INCH 4 26** NOT USED NOT USED HANDLE, ELITE, ML/CM GUIDE, ELITE ML/CM GRIP PLATE, ELITE ML/CM GRIP SPACER SCREW, SELF-TAPPING X 1.00 INCH HANDLE, FIXED HOOK SPACER, THREADED 6-32 X 3/16 INCH ROUND HEAD MACHINE SCREW 6-32 X.75 INCH SCREW, SELF-TAPPING 8-32 X.50 INCH HANDLE, ELITE ML, CM PAINTED KNOB, 1/4-20 X 1 INCH - RUBBER GRIP FOOT, ELITE-BRAKE NUT, JAM 1/ PPP PANEL, ELITE SIDE UPPER WRAPPER WEIGHT, ELITE V HEX HEAD CAP SCREW 1/4-20 X 1.25 INCH GRADE CABLE, ELITE LC/ML COVER, CENTER, CM CARRIER, LEFT-HAND (Packaged with Hardware) COVER, CENTER, CM CARRIER, RIGHT-HAND (Packaged with Hardware) 1 47 Field Purchase LOCTITE, RETAINING COMPOUND #638 A/R * PANEL, ELITE, CABLE PROTECTION KEY, 3/16 X 3/16 INCH PLATE, ELITE CW STOP ARM, ELITE ML STIFF HANDLE SCREW, SELF-TAPPING 8-32 X.50 INCH WASHER, FLAT NAMEPLATE, HUNTER MODEL & PART (Not Illustrated) SOCKET BUTTON HEAD CAP SCREW X 50 INCH FLAT HEAD SOCKET CAP SCREW 1/4-20 X.63 INCH WASHER, FLAT 3/8 INCH SOCKET BUTTON HEAD CAP SCREW, 1/4-20 X.75 INCH KEY, ELITE ML/LC/CM - CW (Shipping Key Not Illustrated) SCREW, STAP 10-32X.50 (Shipping Key Hardware Not Illustrated) DECAL-MADE USA #4 (Not Illustrated) COM, CABLE MANAGEMENT - ML & LC (See Sheet 9 Parts 3 & 4 for Ill.) 1 * Lighter gauge post design components: See previous parts drawing version (4-162, 08-11a) for heavier gauge components. ** Current design replaces loose screw ( ) with welded stud on support. (See 4-162, 03-14d version for older design.) HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

10 LIFT COLUMN (LC / LZ) REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

11 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 6 of 20 Index Part Number Description Qty * POST ASSEMBLY, ELITE UPPER LC 1 OR POST ASSEMBLY, ELITE UPPER LZ (For Export LZ) WEIGHT, ELITE V HEX HEAD CAP SCREW 1/4-20 X 1.25 INCH GRADE NUT, GRIP 1/ PLATE, ELITE CW STOP SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH SHAFT, ELITE LONG SNAP RING, ELITE, 15MM PULLEY, ELITE 4 INCH SOCKET BUTTON HEAD CAP SCREW X 3/4 INCH NUT, KEPS CARRIER, ELITE LC / ML (Refer to ML sheet for carrier components) CABLE, ELITE LC / ML PPP PANEL, ELITE SIDE UPPER WRAPPER COVER, CENTER, CM CARRIER, LEFT-HAND (Packaged with Hardware) COVER, CENTER, CM CARRIER, RIGHT-HAND (Packaged with Hardware) * PANEL, ELITE, CABLE PROTECTION BRACKET, ELITE LIMIT SWITCH SCREW-SELF-TAPPING X.38 INCH SWITCH, ELITE, LIMIT LOWER, HARD SWITCH, ELITE, LIMIT UPPER, HARD SWITCH, ELITE, LWR, SOFT SWITCH, ELITE, UPR, SOFT PAN HEAD MACHINE SCREW, 2-56 X.88 INCH NUT, HEX KEY, 3/16 X 3/16 INCH PPP POST, ELITE UPPER WELD 14 GA MOTOR, ELITE, 120 VOLT WIRE ASSEMBLY ZD 1 OR MOTOR, ELITE, 220 VOLT WIRE ASSEMBLY ZD (For Export LZ) NAMEPLATE, HUNTER MODEL & PART (Not Illustrated) FLAT HEAD SOCKET CAP SCREW 1/4-20 X.63 INCH WASHER, FLAT 3/8 INCH WIRE ASSEMBLY, ELITE LD-LC / LZ CABLE, ELITE LC POSITION NUT, HEX 1/ WASHER, LOCK 1/4 INCH INTERNAL-TOOTH CABLE, SPRING REEL STUD, PRESS #4-40 X ½ INCH SHAFT, REEL DSP600L SNAP RING # PIN, SPRING 1/8 INCH DIAMETER X 3/4 INCH LONG BRACKET ASSEMBLY, REEL ATTACH NUT, KEPS SLEEVE, SLIP REEL ENCODER RING, COMPRESSION BRACKET, ELITE POT MOUNT WELD POT, ELITE, LC NEW LOCATION WASHER,.261 I.D. X.625 O.D. X.05 INCH SOCKET BUTTON HEAD CAP SCREW X.38 INCH, FULL-THREAD WIRE ASSEMBLY, HAWKEYE POST CAP CAP, ASSEMBLY SMALL (See Sheet 4) KEY, ELITE ML/LC/CM - CW (Shipping Key Not Illustrated) SCREW, STAP 10-32X.50 (Shipping Key Hardware Not Illustrated) DECAL-MADE USA #4 (Not Illustrated) NUT, KEPS 1/ COM, CABLE MANAGEMENT - ML & LC (See Sheet 9 Parts 3 & 4 for Ill.) 1 * Lighter gauge post design components: See previous parts drawing version (4-162, 08-11a) for heavier gauge components HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

12 CABINET MOUNT COLUMN (CM) REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

13 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 7 of 20 Index Part Number Description Qty POST ASSEMBLY, ELITE CM PPP POST, CENTER - CM CARRIER, CENTER - CM CARRIER, ELITE WELD NUT-GRIP 1/ PLATE, CABLE LOCK ELITE HEX HEAD CAP SCREW 1/4-20 X.75 INCH (FULL-THREAD) NUT-KEPS 1/ SPRING, ELITE - LOCK BRACKET, CABLE MOUNT BURNDY WELD 1 10* * SUPPORT, CABLE MOUNT LOCK WELD SPACER, ELITE ROLLER ROLLER, ELITE HEM 4 13 TR50 BEARING HOLDER, ELITE ROLLER EXCENTRIC SOCKET HEAD CAP SCREW 3/8-16 X 1.75 INCH SCREW, SELF-TAPPING X.38 INCH 4 17* NOT USED* NOT USED LINK, CENTER CM - HANDLE HANDLE, ELITE - ML/CM GUIDE, ELITE ML/CM GRIP PLATE, ELITE ML/CM GRIP SPACER SCREW, SELF-TAPPING X 1.00 INCH HANDLE, FIXED HOOK SPACER, THREADED 6-32 X 3/16 INCH ROUND HEAD MACHINE SCREW 6-32 X.75 INCH SCREW-SELF-TAPPING 8-32 X.50 INCH HANDLE, ELITE ML-CM PAINTED KNOB, 1/4-20 X 1 INCH - RUBBER GRIP FOOT, ELITE-BRAKE NUT, JAM 1/ WASHER, FLAT 1/4 INCH SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH WASHER, FLAT SCREW, SELF-TAPPING 8-32 X.50 INCH 3 ** SUPPORT, PULLEY 1 37** PPP** SUPPORT, CENTER-CM-PLY-WLD 1 38** ** BEARING, ELITE-15 MM-ID 2 39** Field Purchase** LOCTITE, RETAINING COMPOUND # ** ** PULLEY, CENTER CM - 5 INCH 1 41** ** SHAFT, CENTER CM - SHORT 1 42** ** SNAP RING, ELITE - 15 MM 4 43** ** PIN-HI FORCE LATCH 2 44** ** SNAP RING # PULLEY ASSEMBLY, CENTER CM IDLER (includes: bushing , item 1 51) BOLT, SHOULDER 3/8 DIA X 3/8 INCH SHOULDER CABLE, CENTER-CM FLAT HEAD SOCKET CAP SCREW 1/4-20 X.63 INCH WASHER, FLAT 3/8 INCH NUT, GRIP 1/ * Current design replaces loose screw ( ) with welded stud on support. (See 4-162, 03-14d version for older design.) ** An assembly of noted items is now available as SUPPORT, PULLEY, HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

14 CABINET MOUNT COLUMN (QUICKCHECK) REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

15 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 8 of 20 Index Part Number Description Qty POST ASSEMBLY, CENTER CM FC PPP POST, CENTER CM FC CARRIER, ELITE WELD BRACKET, ELITE FIXED FRONT SPACER BRACKET, ELITE FIXED REAR POS BRACKET, ELITE FIXED REAR CLAMP SOCKET BUTTON HEAD CAP SCREW-1/4-20 X.75 INCH NUT, KEPS 1/ HEX HEAD CAP SCREW 3/8-16 X 2.00 INCH SCREW SELF-TAPPING X.38 INCH COVER, CENTER CM CARRIER LEFT HAND COVER, CENTER CM CARRIER RIGHT HAND CAP, ASSEMBLY SMALL (See Sheet 4) PPP COVER, BACK CENTER CM FIXED SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.50 INCH DECAL, MADE USA # HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

16 WAxxxCM AND QC73 CABINET REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

17 Index Part Number Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 9 of 20 Description BEAM, ELITE ASSEMBLY (Not Illustrated) 1 OR BEAM-ELITE NARROW ASSEMBLY (Not Illustrated) POST, CENTER-MOUNT CM - ASSEMBLY 1 OR POST, ASSEMBLY CNTR CM-FC (Not Illustrated) COM, CABLE MANAGEMENT - ML & LC HOUSING, ELITE-COMU-MGNT CABLE ASSEMBLY, USB+BURNDY PULLEY, 5.5N-ELITE-CAST-IRON SCREW, RHSMS #6 X 1.0 INCH HI-LO WEIGHT, BURNDY-CABLE-ELITE HOUSING, ELITE CABLE MANAGEMENT GUIDE, CENTER CM COUNTER-WEIGHT WEIGHT, CENTER - CM WEIGHT, CENTER CM PLATE WASHER, FENDER 1/4 INCH WASHER, FLAT 1/4 INCH SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.00 INCH NUT, GRIP 1/ SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH WASHER, 1/4 ID X 3/4 OD X 3/16 INCH THICK WEIGHT-CENTER - CM - HALF - WELD HARDWARE-CENTER - CM (Consisting of:) 1 OR HARDWARE-CENTER - CM FIXED SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.50 INCH TUBE, CENTER - CM ANTI-TIP TUBE, CABINET - CM PLUG, 1.5 INCH OD RUBBER - BLACK CHANNEL, CENTER - CM-TIP SPACER-PLASTIC 1/2 OD X 3/8 INCH LONG SOCKET HEAD CAP SCREW 1/4-20 X 1.00 INCH FULL-THREAD BAR, NUT ANTI-PIVOT NUT, KEPS NUT, KEPS 3/ HEX HEAD CAP SCREW 3/8-16 X 2.00 INCH CAP, ASSEMBLY SMALL (See Sheet 4) WIRE ASSEMBLY, HAWKEYE POST CAP CLAMP, P CLIP 3/8 INCH ID RUBBER SCREW, SELF-TAPPING X.38 INCH SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 3/8 INCH HEX HEAD CAP SCREW 5/16-18 X.63 INCH GRADE 5 (FULL-THREAD) WASHER, FLAT 5/16 INCH HEX HEAD CAP SCREW 3/8-16 X.75 INCH (FULL-THREAD) WASHER, FLAT 3/8 INCH COVER, CENTER - CM-CARRIER LEFT-HAND COVER, CENTER - CM-CARRIER RIGHT-HAND SOCKET BUTTON HEAD CAP SCREW 5/16-18 X 1.00 (FULL-THREAD) SOCKET BUTTON HEAD CAP SCREW-1/4-20 X.75 INCH NUT, KEPS 5/ SOCKET BUTTON HEAD CAP SCREW X.50 INCH NAMEPLATE, HAWKEYE LED TRUSS HEAD MACHINE SCREW X.75 INCH CM COUNTERWEIGHT GUIDE SPACER BAR SUPPORT, CENTER - CM-DEMO-REAR-COVER 1 50a NUT HEX INSERT (Not Illustrated) PPP COVER, CENTER - CM-REAR-WELD SUPPORT, ASSEMBLY-CENTER - CM SUPPORT, SIDE-WIDE-LEFT SUPPORT, SIDE-WIDE-RIGHT PPP PANEL, WELD REAR (See Cabinet Parts Dwg) Ref. Ref. CM Qty. QC Qty HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

18 WAxxxCM AND QC73 MONITOR REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

19 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 10 of 20 Index Part Number Description CM Qty KIT, CM LCD ARM INCH SWIVEL SUPPORT ASSEMBLY, ADJ MONITOR ARM SUPPORT, ELITE MONITOR CLEVIS ARM, ARTICULATED MONITOR SUPPORT PIN, MONITOR ELITE SHORT PIN, MONITOR ELITE LONG COVER, MONITOR ARM PAN HEAD MACHINE SCREW 8-32 X 3/4 INCH SNAP RING-TRUARC # CAP, MONITOR PIN SUPPORT, MONITOR ARM COLUMN COUPLING, MONITOR SWIVEL MOUNT BASE, MONITOR MOUNT PLATE, MONITOR MOUNT NUT, MONITOR MOUNT SPRING, WAVE.375 ID X.56 INCH OD NUT, HEX 5/16-18 ZP BOLT, SHOULDER 3/8 X WASHER, SHIM.39 IDX.62 ODX PAN HEAD SHEET METAL SCREW SELF-TAPPING - #10 X.63 INCH HI-LO BRACKET ASSEMBLY- MONITOR COLUMN MOUNT PAN HEAD SHEET METAL SCREW SELF-TAPPING #10-16 X 1/2 INCH (Not Illus.) NUT, ACORN 1/4-20 LOW CROWN NUT, ACORN AND WASHER-FLAT 10 SPECIAL (as needed) (Not Illustrated) SOCKET SET SCREW 1/4-20 X 3/8 INCH HALF DOG PT SUPPORT, LARGE MONITOR COLUMN MOUNT (for fixed only) CABLE, PC POWER EXT C13-C14 (Not Illustrated) KIT, CM LCD 32 INCH MONITOR MOUNT (Consisting Of:) SUPPORT, LARGE MONITOR COLUMN MOUNT BRACKET ASSEMBLY, MONITOR COLUMN MOUNT SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH (Not Illustrated) NUT, ACORN 1/4-20 LOW CROWN NUT, ACORN SOCKET SET SCREW 1/4-20 X 3/8 INCH HALF DOG PT CABLE, PC POWER EXT C13-C14 (Not Illustrated) KIT MOUNTING FIXED MONITOR ELITE BRACKET ASSEMBLY - MONITOR FIXED (Used only on 32-inch LCD Installations) TIE CABLE (Not Illustrated) HARNESS, SPIRAL WRAP.25 INCH BLACK (Not Illustrated) 18 IN PAN HEAD MACHINE SCREW M6-1.0 X 16 MM WASHER, FLAT 1/4 INCH PAN HEAD MACHINE SCREW M4 X.7 X 12 MM WASHER, FLAT PAN HEAD MACHINE SCREW M6-1.0 X 25 MM LONG PAN HEAD MACHINE SCREW M4 X.7 X 16 MM LONG SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 BO DISPLAY, 24 INCH CLASS LCD DISPLAY, 27 INCH CLASS LCD DISPLAY, 32 INCH CLASS LCD (WA485) CABLE, VIDEO EXTENDER, W/SHIELD (Not Illustrated) CABLE, STEREO JUMPER (w/ 27" & 32") (Not Illustrated) HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

20 WALL MOUNT (WM) REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

21 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 11 of 20 Index Part Number Description Qty BEAM, ELITE, ASSEMBLY (See Sheet 13) SHELF, WMS, BOTTOM, WELD SHELF, WMS, TOP PPP SUPPORT, ELITE WM ASSEMBLY (Consisting Of:) PPP SUPPORT, ELITE CARRIER WM WELD BRACKET, ELITE FIXED REAR CLAMP COVER, CENTER, CM CARRIER, LEFT-HAND (Packaged with Hardware) COVER, CENTER, CM CARRIER, RIGHT-HAND (Packaged with Hardware) CARRIER, ELITE WELD BRACKET, ELITE FIXED FRONT SPACER HEX HEAD CAP SCREW 3/8-16 X 2.00 INCH SOCKET BUTTON HEAD CAP SCREW-1/4-20 X.75 INCH NUT, KEPS 1/ SCREW, SELF-TAPPING X.38 INCH DECAL, MADE USA #4 (Not Illustrated) NAMEPLATE, HUNTER MODEL & PART (Not Illustrated) KIT, WM HARDWARE (Partial List) HEX HEAD CAP SCREW 5/16-18 X.75 INCH, GRADE 5, FULL-THREAD BOLT, ANCHOR 1/2 X 3 3/4 INCH SCREW, SELF-TAPPING X.75 INCH CLAMP, P CLIP 3/8 INCH I.D. RUBBER (Not Illustrated) NUT, KEPS 5/ CAP, ASSEMBLY SMALL (See Sheet 4) WIRE ASSEMBLY, HAWKEYE POST CAP PLATE, ADAPTOR, WM, HUB HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

22 WALL MOUNT EXTENSION REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

23 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 12 of 20 Index Part Number Description Qty KIT, WALL MOUNT EXTENSION ARM, WMH, WELDMENT PPP BRACKET ASSEMBLY, WALL MOUNT PPP ROD ASSEMBLY, PAINTED ROD, 1/2-13 X 10 INCH HEX HEAD CAP SCREW 1/2-13 X 2.00 INCH, FULL-THREAD SCREW, THREAD ROLLING5/16-18 X 1/2 INCH WASHER, FLAT 1/2 INCH NUT, HEX 1/ BOLT, ANCHOR 1/2 X 3 3/4 INCH NUT, HOLLOW SET DROP-IN 1/ KIT, WM HARDWARE (Partial List) HEX HEAD CAP SCREW 1/2-13 X 1.00 FTHD (Angled Beam) (Not Illustrated) NUT, HEX 1/2-13 (Angled Beam) (Not Illustrated) WASHER, LOCK 1/2 HELICAL SPRING (Angled Beam) (Not Illustrated) WASHER, 2 OD X.515 ID X.109 INCH SPCL. (Angled Beam) (Not Illustrated) NUT, HOLLOW SET DROP-IN 1/2-13 (Support) (Not Illustrated) HEX HEAD CAP SCREW 1/2-13 X 2.00 INCH FTHD (Support) (Not Illustrated) WASHER, FLAT 1/2 INCH (Support) (Not Illustrated) HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

24 PIT (PS & PD) / TWO-POST (FM) REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

25 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 13 of 20 Inde x Part Number Description * BRACKET, ELITE, PS / PD / FM HEX HEAD CAP SCREW 1/4-20 X.75 INCH, FULL-THREAD WASHER, LOCK 1/4 INCH HELICAL SPRING * CARRIER, ELITE WELD * HEX HEAD CAP SCREW 3/8-16 X.88 INCH, FULL-THREAD BEAM, ELITE, ASSEMBLY (See Sheet 13) NUT, KEPS 5/ BRACKET, PM, HUB, MOUNT ROUND HEAD MACHINE SCREW 4-40 X 1.50 INCH LONG ELECT ASSEMBLY, 2 BURNDY HUB SOCKET BUTTON HEAD CAP SCREW 8-32 X.38 INCH, FULL-THREAD NUT, KEPS CABLE ASSEMBLY, USB+BURNDY (Not Illustrated) COVER, CENTER, CM CARRIER, LEFT-HAND COVER, CENTER, CM CARRIER, RIGHT-HAND SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH CLAMP, P CLIP 3/8 INCH I.D. RUBBER (Not Illustrated) NAMEPLATE, HUNTER MODEL & PART (Not Illustrated) SCREW, SELF-TAPPING X.38 INCH * WASHER, FLAT 3/8 INCH LEG ASSEMBLY, LOWER DSP PPP LEG, UPPER DSP600 FMW PPP COVER, LEG UPPER DSP600 FMW PPP COVER, LEG LOWER DSP600 FMW PPP LEG ASSEMBLY, VERTICAL DSP600 PM PPP COVER, VERTICAL LEG DSP600 PM PPP PLATE, SPLICE DSP600PMW (Not Illustrated) PPP BEAM ASSEMBLY, END DSP600 PIT PPP BEAM WELDMENT, CENTER SUPPORT DSP PPP COVER, END PLATE DSP600 FMW KIT, DSP600 FMW MOUNTING HDWARE (Not Illustrated) KIT, DSP600 PIT MOUNT HARDWARE (Not Illustrated) KIT, DSP600PMW MOUNT HARDWARE (Not Illustrated) SOCKET BUTTON HEAD CAP SCREW 3/8-16 X.75 INCH, FTHD NUT, KEPS 3/ TRUSS HEAD SHEET METAL SCREW 8 X 3/8 INCH SCREW, SELF-TAPPING 8-32 X.50 INCH (Not Illustrated) TRUSS HEAD MACHINE SCREW X 1/2 INCH NUT, KEPS 1/ RIVET, BLIND 3/16 X 1/4 INCH BOLT, ANCHOR 1/2 X 3 3/4 INCH HEX HEAD CAP SCREW 1/2-13 X 2.50 INCH NUT, JAM 1/ BUSHING, HEYCO # NUT, KEPS CABLE CLAMP, NY 3/4 CAB, 3/8 INCH SCR (Not Illustrated) WASHER, LOCK 8 INTERNAL-TOOTH BUSHING, HEYCO # TIE, CABLE (Not Illustrated) PLUG, 2 INCH HOLE HEYCO FHMS 8-32 X.50 INCH, FULL-THREAD * Items 1, 4, 5 and 20 are available pre-assembled as , BRACKET ASSEMBLY - ELITE PS/PD/FM. FM Qty PS Qty PD Qty HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

26 * DRIVE-THROUGH (QUICK CHECK) REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

27 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 14 of 20 Index Part Number Description Qty PEDESTAL ASSEMBLY, HE400DT QC LEFT-HAND (Consisting Of:) 1 OR PEDESTAL ASSEMBLY, HE400DT (WQ) LEFT-HAND (Consisting Of:) PEDESTAL ASSEMBLY, HE400DT QC RIGHT-HAND (Not Illustr.) (Consisting Of:) 1 OR PEDESTAL ASSEMBLY, HE400DT (WQ) RIGHT-HAND (Not Illustr.) (Consisting Of:) PPP PEDESTAL WELDMENT, HE400DT QC (Short Tower) 1 OR PPP PEDESTAL WELDMENT, HS-DT (WQ) (Not Illustr.) 1 3A DECAL-HE421DT (For shorter QC pedestal) 1 OR DECAL-HS400DT (For taller pedestal - not shown) PPP COVER ASSEMBLY, TOP DSP600DT PPP PLATE, REAR DOOR DSP600DT SCREW, THREAD ROLLING 1/4-20 X 1/2 INCH, TORX SOCKET BUTTON HEAD CAP SCREW 8-32 X.38 INCH, FULL-THREAD COUPLER, CAMERA ELITE WIDE HEX HEAD CAP SCREW 1/4-20 X.50 INCH, FULL-THREAD WASHER, FLAT 1/4 INCH BLOCK, CAMERA MOUNT HEX HEAD CAP SCREW 3/8-16 X.75 INCH, FULL-THREAD SOCKET SET SCREW 1/4-20 X 3/4 INCH, OVAL POINT HEX HEAD CAP SCREW 1/4-20 X.75 INCH, FULL-THREAD WASHER, FLAT 3/8 INCH SPECIAL SHIELD, DSP600DT LEFT-HAND 1 OR SHIELD, DSP600DT RIGHT-HAND (Not Illustrated) DECAL, HE421DT (Not Illustrated) PPP PLATE, REAR DOOR TOP DT COLUMN COVER, ELECTRIC CABLE, DSP600DT KIT, HARDWARE DSP600DT (Consisting Of:) BOLT, ANCHOR 1/2 X 3 3/4 INCH BOLT, ANCHOR 1/2 X 2 3/4 INCH, HEX HEAD HEX HEAD CAP SCREW 1/4-20 X.75 INCH,FTHD (Not Illustrated) SOCKET BUTTON HEAD CAP SCREW 8-32 X.38 INCH FTHD (Not Illustrated) 4 27A KIT, QUICK CHECK INDICATOR BAR (Not Illustrated) 1 27B BAR, POSITION, INDICATOR (Not Illustrated) 1 27C BOLT, ANCHOR 1/2 X 2 3/4 INCH HEX HEAD (Not Illustrated) 2 27D TAPE, YELLOW, 3 INCH X 36 YARD (Not Illustrated) SENSOR, 4 CAMERA PENTACAM 3 LEFT (See Camera Sheet) SENSOR, 4 CAMERA PENTACAM 3 RIGHT (See Camera Sheet) (Not Illustrated) 1 30A CABLE, USB 2.0 A/B 2 METER (~6 1/2 Feet) (Not Illustrated) 2 30B CABLE, USB 2.0 A/B 5M (~16 1/2 Feet) (Not Illustrated) 2 31A WIRE ASSEMBLY DSP600L EMITTER POWER (~6 Feet) (Not Illustrated) 1 31B WIRE ASSEMBLY DSP600 EMITTER POWER 5M (~16 1/2 Feet) (Not Illustrated) SOCKET HEAD CAP SCREW 1/4-20 X 1.00 INCH, FULL-THREAD ROUND HEAD MACHINE SCREW 6-32 X.38 INCH (Not Illustrated) SPACER, #8 X INCH LONG ROUND HEAD MACHINE SCREW 8-32 X 1.50 INCH NUT, KEPS ROUND HEAD MACHINE SCREW 4-40 X 1.50 INCH LONG NUT, HEX CLAMP, P CLIP 3/8 INCH I.D. RUBBER (Not Illustrated) SCREW, SELF-TAPPING 8-32 X 3/8 INCH(Not Illustrated) KIT, PCA 7 PORT USB2 HUB (Consisting Of:) PCA, 7 PORT USB2 HUB CABLE ASSEMBLY, USB+BURNDY COVER, DT THRESHOLD, EXTENSION HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

28 DRIVE UNDER (QUICKCHECK) REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

29 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 15 of 20 Index Part Number Description Qty SUPPORT, DU - WIDE-CARRIER BEAM, ELITE - DU (See Sheet 15.) COVER, DU WIDE REAR, RIGHT COVER, DU WIDE REAR, LEFT COVER, ELITE DU CENTER (Includes:) DECAL, ELITE HAWKEYE (Not Illustrated) COVER, ELITE LEFT-FRONT ASSEMBLY COVER, ELITE RIGHT-FRONT ASSEMBLY COVER, ELITE LEFT-HAND REAR COVER, ELITE RIGHT-HAND REAR PLATE, WM DU MOUNT SPACER, WALL MOUNT - DU KIT, ELITE-DU HARDWARE (Consisting Of:) NUT, KEPS 5/ SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH SCREW-SELF-TAPPING X.38 INCH ROUND HEAD MACHINE SCREW 8-32 X.50 INCH ROUND HEAD MACHINE SCREW 8-32 X 3/4 INCH BOLT, ANCHOR 1/2 X 3 3/4 INCH NUT, HOLLOW SET DROP-IN 1/2-13 (Alt, wall anchors) (Not Illustrated) HEX HEAD CAP SCREW 1/2-13 X 2.00 FTHD (Alt, wall anchors) (Not Illus.) WASHER-FLAT 1/2 INCH HEX HEAD CAP SCREW 1/2-13 X 1.50 INCH (FULL-THREAD) WASHER, LOCK 1/2 INCH HELICAL SPRING KIT, ELITE-DRIVE UNDER-MONITOR AND SUPPORT (Consisting Of:) KIT, ELITE DU MONITOR MOUNT (Consisting Of:) SUPPORT, DU MONITOR PAN HEAD MACHINE SCREW M4 X.7 X 16 MM WASHER, FLAT 8 INCH PAN HEAD MACHINE SCREW M6-1.0 X 16 MM LONG WASHER, FLAT 1/4 INCH BRACKET, DU MONITOR HEX HEAD CAP SCREW 1/4-20 X.63 INCH GRADE 5 (FULL-THREAD) NUT, KEPS 1/ KIT, DU MONITOR / CONNECTOR / CABLE DISPLAY, 32 INCH CLASS LCD CABLE, HDMI 75 FEET CONNECTOR, HDMI MALE DVI FEMALE KIT, PCA QUICK CHECK HUB WITH POWER (Only for DU) (Not Illustrated) PCA, DRIVE UNDER HUB (Only for DU) (Not Illustrated) CABLE ASSEMBLY, USB + BURNDY ROUND HEAD MACHINE SCREW 6-32 X.38 INCH ROUND HEAD MACHINE SCREW 4-40 X 1.50 INCH LONG CLAMP, P CLIP 3/8 INCH ID RUBBER (Not Illustrated) KIT, RETROFIT DSP600 USB HUB (Supplied with DU) (Not Illustrated) ELECTRIC ASSEMBLY, 2 BURNDY HUB (Contains) PCA, DUAL BURNDY HUB (Not Illustrated) CABLE ASSEMBLY, USB + BURNDY CABLE CLAMP, NY 3/4 CAB, 3/8 SCR (Not Illustrated) SOCKET BUTTON HEAD CAP SCREW 8-32 X.38 INCH FTHD (Not Illustrated) NUT, KEPS 8-32(Not Illustrated) KIT, USB TO ETHERNET (Not Illustrated) CABLE, RJ45 PANEL MOUNT (Not Illustrated) CABLE, SENSOR 75 FEET (Not Illustrated) CABLE, 5 VDC POWER (Not Illustrated) FASTENER, VELCRO 2 INCH LOOP SIDE(Not Illustrated) FASTENER, VELCRO 2 INCH HOOK SIDE (Not Illustrated) TIE-CABLE (Not Illustrated) 6 59 Field Obtained BLACK BOX USB EXTENDER (MODEL IC400A) (Not Illustrated) KIT, QUICK CHECK INDICATOR BAR (Not Illus.) (See Sheet 14 for kit.) HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

30 HS421 AND HE421 CAMERAS REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

31 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 16 of 20 Index Part Number Description Qty BEAM, ELITE, ASSEMBLY (Consisting Of:) 1 OR BEAM, ELITE, NARROW, ASSEMBLY (WQ Cabinet-Mount) (Not Illus.) (Cons. Of:) 1 OR BEAM, ELITE-DU (WQ Drive Under) (Not Illus.) (Cons. Of:) BEAM, ELITE, WELDMENT 1 OR ELITE, NARROW BEAM, WELDMENT (WQ Cabinet-Mount) (Not Illus.) 1 OR BEAM, DU-WIDE-WELDMENT 1 2A NUT-HEX INSERT BRACKET ASSEMBLY, CAMERA ADJUST RIGHT-HAND (Not Illustrated) BRACKET ASSEMBLY, CAMERA ADJUST LEFT-HAND BLOCK, CAMERA MOUNT HEX HEAD CAP SCREW 3/8-16 X.75 INCH, FULL-THREAD WASHER, FLAT 3/8 INCH SPECIAL HEX HEAD CAP SCREW 1/4-20 X.50 INCH, FULL-THREAD WASHER, FLAT 1/4 INCH SOCKET SET SCREW 1/4-20 X 3/4 INCH, OVAL POINT HEX HEAD CAP SCREW 1/4-20 X.75 INCH, FULL-THREAD DECAL, ELITE BEAM PIN STRIPE RIGHT-HAND (Not Illustrated) 1 OR DECAL, ELITE BEAM PIN STRIPE RIGHT-HAND (For Narrow Beam) (Not Illustrated) DECAL, ELITE BEAM PIN STRIPE LEFT-HAND (Not Illustrated) 1 OR DECAL, ELITE BEAM PIN STRIPE LEFT-HAND (For Narrow Beam) (Not Illustrated) SENSOR, 4 CAMERA PENTACAM 3 LEFT (Includes:) SENSOR, 4 CAMERA PENTACAM 3 RIGHT (Includes:) (Not Illustrated) R TRANSDUCER. PENTACAM3 FRONT REPLACE (Camera) R TRANSDUCER, PENTACAM3 REAR REPLACE (Camera) 1 17A PCA, SAMTEC 34 PIN FLEX CABLE (Ribbon from imager to control board) SCREW, SELF-TAPPING 8-32 TRILOB PCB-PENTACAM3 CONTROL SCREW, SELF-TAPPING 6-32 X.38 INCH PCA, HP PENTICAM EMITTER SCREW, SELF-TAPPING 4-40 X 1/4 INCH WIRE ASSEMBLY, CAMERA EMITTER CONTR CABLE, USB 2.0 A/B 2 METER (Only for FC, ML, LC, CM, WM, DU) (Not Illustrated) 4 OR CABLE, USB 2.0 A/B 4 METER (Only for PS, PD, FM, DU) (Not Illustrated) 4 OR CABLE, USB 2.0 A/B 5 METER (Only for DT) (Not Illustrated) WIRE ASM, DSP600L EMITTER POWER (Only for FC, ML, LC, CM, WM, DU) (Not Illus.) 2 OR WIRE ASSEMBLY, DSP600 EMITTER POWER (Only for PS PD FM) (Not Illustr.) 2 OR WIRE ASSEMBLY, DSP600 EMITTER POWER 5 METER (Only for DT) (Not Illustr.) 2 OR WIRE ASSEMBLY, EMITTER POWER 128 INCH (Only for DU) (Not Illustr.) SOCKET HEAD CAP SCREW 1/4-20 X 1.00 INCH, FULL-THREAD TRANSDUCER ASSEMBLY, CAMBER CELL HE401 (Only for ML LC CM) BRACKET ASSEMBLY, CAMBER CELL HE PCA, DSP700 CAMAMBER / CASTER PAN HEAD MACHINE SCREW 4-40 X 3/16 INCH ROUND HEAD MACHINE SCREW 6-32 X.38 INCH SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH CABLE ASSEMBLY, BEAM CAMBER KIT, PCA 4-PORT USB HUB (Only for FC ML LC) PCA, VCS USB2 HUB (Only for FC ML LC) CABLE ASSEMBLY, USB+BURNDY * KIT, PCA 7 PORT USB2 HUB (Only for WM PS PD FM or DT) (Not Illustrated) PCA, 7 PORT USB2 HUB (Only for WM PS PD FM or DT) (Not Illustrated) CABLE ASSEMBLY, USB+BURNDY * KIT, PCA QUICK CHECK HUB W/ PWR (Only for DU) (Consisting Of:) (Not Illustrated) PCA, DRIVE UNDER HUB (Only for DU) (Not Illustrated) CABLE ASSEMBLY, USB+BURNDY KIT, RETROFIT DSP600 USB HUB (Supplied with DU) (Includes:) (Not Illustrated) ELECTRIC ASSEMBLY. 2 BURNDY HUB (Includes:) (Not Illustrated) PCA, DUAL BURNDY HUB 1 * NOTE: SEE APPROPRIATE WM, PS/PD/FM, DT OR DU SHEET FOR HUB ADAPTOR PLATE AND HUB LOCATION HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

32 HS221 CAMERAS REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

33 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 17 of 20 Index Part Number Description Qty BEAM, ELITE, ASSEMBLY (Consisting Of:) 1 OR BEAM, ELITE, NARROW, ASSEMBLY (Not Illus.) (Cons. Of:) BEAM, ELITE, WELDMENT 1 OR ELITE, NARROW BEAM, WELDMENT (WQ Cabinet-Mount) (Not Illus.) 1 2A NUT-HEX INSERT BRACKET ASSEMBLY, CAMERA ADJUST RIGHT-HAND (Not Illustrated) BRACKET ASSEMBLY, CAMERA ADJUST LEFT-HAND HEX HEAD CAP SCREW 3/8-16 X.75 INCH, FULL-THREAD WASHER, FLAT 3/8 INCH SPECIAL HEX HEAD CAP SCREW 1/4-20 X.50 INCH, FULL-THREAD WASHER, FLAT 1/4 INCH SOCKET SET SCREW 1/4-20 X 3/4 INCH, OVAL POINT HEX HEAD CAP SCREW 1/4-20 X.75 INCH, FULL-THREAD DECAL, ELITE BEAM PIN STRIPE RIGHT-HAND (Not Illustrated) 1 OR DECAL, ELITE BEAM PIN STRIPE RIGHT-HAND (For Narrow Beam) (Not Illustrated) DECAL, ELITE BEAM PIN STRIPE LEFT-HAND (Not Illustrated) 1 OR DECAL, ELITE BEAM PIN STRIPE LEFT-HAND (For Narrow Beam) (Not Illustrated) SENSOR, HS22X LEFT GEN 3 (Includes:) SENSOR, HS22X RIGHT GEN 3 (Includes:) (Not Illustrated) R TRANSDUCER. PENTACAM3 FRONT REPLACE (Camera) 1 15A PCA, SAMTEC 34 PIN FLEX CABLE (Ribbon from imager to control board) SCREW-SELF-TAPPING 8-32 TRILOB PCB-PENTACAM3 CONTROL SCREW, SELF-TAPPING 6-32 X.38 INCH PCA, HP PENTICAM EMITTER SCREW, SELF-TAPPING 4-40 X 1/4 INCH WIRE ASSEMBLY, CAMERA EMITTER CONTROL CABLE, USB 2.0 A/B 2 METER (Only for FC, ML, LZ, CM, WM) (Not Illustrated) 2 OR CABLE, USB 2.0 A/B 4 METER (Only for FM) (Not Illustrated) 2 OR CABLE, USB 2.0 A/B 5 METER (Only for DT) (Not Illustrated) WIRE ASM, DSP600L EMITTER POWER (Only for FC, ML, LZ, CM, WM) (Not Illus.) 2 OR WIRE ASSEMBLY, DSP600 EMITTER POWER (Only for FM) (Not Illustr.) 2 OR WIRE ASSEMBLY, DSP600 EMITTER POWER 5 METER (Only for DT) (Not Illustr.) KIT, PCA 4-PORT USB HUB (Only for FC ML LZ) PCA, VCS USB2 HUB (Only for FC ML LZ) CABLE ASSEMBLY, USB+BURNDY * KIT, PCA 7 PORT USB2 HUB (Only for WM, FM or DT) (Not Illustrated) PCA, 7 PORT USB2 HUB (Only for WM FM or DT) (Not Illustrated) CABLE ASSEMBLY, USB+BURNDY PLATE-ELITE-2CAM-BAFFLE NUT-SELF THREAD 1/8 STUD (Not Illustrated) COVER, ELITE, LF, ASSEMBLY Ref ROUND HEAD MACHINE SCREW 6-32 X.38 INCH HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

34 HE421 ADAPTOR HANGERS, QC CART AND SPACERS REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

35 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 18 of 20 Index Part Number Description Qty KIT, CLAMP-ON ADAPTOR HANGERS (Consisting Of:) KIT, TD TARGET HANGER MOLDED (Consisting Of:) ROUND HEAD MACHINE SCREW 1/4-20 X 1/2 INCH TRUSS HEAD MACHINE SCREW X.75 INCH (secure hangers to aligner) HEX HEAD CAP SCREW-1/4-20X1.25 INCH GRADE NUT, KEPS SCREW, SELF-TAPPING PAN HEAD SHEET MEATAL SCREW 8-18 HI-LO SUPPORT ASSEMBLY, QUICK GRIP STORAGE SUPPORT, HOOK QUICK GRIP STORAGE (coa hangers / coa lift mnt) NUT - WEDGE ANCHOR 1/ WASHER, WEDGE ANCHOR WASHER, FLAT 1/4 INCH (Only in ) HOOK, ACCESSORY CART STORAGE TRUSS HEAD SHEET METAL SCREW #8 X.63 PR BZ DRILL PNT BRACKET ASSY, ADAPTER STORAGE (Retro Fit Only) (Only in ) SCREW, THREAD ROLLING X 1/2 INCH HWH (Only in ) KIT, QUICK GRIP EXTENSIONS (Consisting Of:) SPACER, COA EXTENSION RING (Consisting Of:) SPACER, 3-D ADAPTER SHIELD, PROTECTIVE RING SPACER SHIELD, PROTECTIVE RING SPACER SUPPORT, EXT RING STORAGE TRUSS HEAD SHEET METAL SCREW-#8 X.63 INCH DRILL POINT WASHER, FLAT KIT, COA CART STORAGE ACCESSORY (QC CART) (Consisting Of:) STAND, ELITE-COA ACCESSORY SUPPORT, CODELINK STORAGE SUPPORT, BATTERY TESTER STORAGE SUPPORT, COA ACCESSORY IR-RMT SUPPORT, COA ACCESSORY TDG-TOOL SUPPORT, COA-PLASTIC HANGER MOUNT SOCKET BUTTON HEAD CAP SCREW X.38 INCH (FULL-THREAD) NUT, KEPS WASHER, FLAT TRUSS HEAD MACHINE SCREW X.75 INCH KIT, BASE & CASTERS- COA CART (Consisting Of:) BASE, COA ACCESSORY CART ROLL WHEEL, 3 INCH SWIVEL SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH NUT, KEPS 1/ SOCKET BUTTON HEAD CAP SCREW X.38 INCH (FULL-THREAD) NUT, KEPS CASTER, 3INCH SWIVEL-LOCK PLUG, SMT HOLE 1-1/4 INCH DIAMETER HOOK, BRACKET KIT, RING SUPPORT BRACKETS (Consisting Of:) BRACKET, RING SUPPORT BASE BRACKET, RING SUPPORT TOP TRUSS HEAD SHEET METAL SCREW #8 X.63 INCH (DRILL POINT) HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

36 HE421 TARGETS REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

37 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 19 of 20 Index Part Number Description Qty TARGET ASSEMBLY, 3D DOT LEFT-FRONT TARGET ASSEMBLY, 3D DOT RIGHT-FRONT (Not Illustrated) TARGET ASSEMBLY, 3D DOT LEFT-REAR (Not Illustrated) TARGET ASSEMBLY, 3D DOT RIGHT-REAR (Not Illustrated) HOUSING, DOT TARGET * DECAL, 3D TARGET * DECAL, 3D TARGET KNOB, DOT TARGET SNAP RING, # OR EQUAL PLATE, MAGNET MAX STEER LEFT 1 OR PLATE, MAGNET MAX STEER RIGHT (Not Illustrated) NUT, KEPS * DECAL, 3D TARGET DECAL, TARGET POSITION LFT FRONT 1 OR DECAL, TARGET POSITION RT FRONT (Not Illustrated) 1 OR DECAL, TARGET POSITION LFT REAR (Not Illustrated) 1 OR DECAL, TARGET POSITION RT REAR (Not Illustrated) DECAL, TARGET POSITION LEFT DECAL, TARGET POSITIN RIGHT DECAL, HUNTER LOGO DECAL, TARGET POSITION LEFT FRONT 1 OR DECAL, TARGET POSITION RIGHT FRONT (Not Illustrated) 1 OR DECAL, TARGET POSITION LEFT REAR (Not Illustrated) 1 OR DECAL, TARGET POSITION RIGHT REAR (Not Illustrated) DECAL, BAY I.D. MARKS 3D TARGET(Not Illustrated) KIT, WIDE ANGLE 3D TARGET TARGET ASSEMBLY, MAX STEER 3D LFT TARGET ASSEMBLY, MAX STEER RIGHT (Not Illustrated) HOUSING, MAX STEER COLLAR, MAGNET MAGNET, 2 POLE 50 POUND SCREW, SELF-TAPPING PAN HEAD SHEET METAL SCREW 8-18 HI-LO DECAL, 6 DOT TARGET TAB, MAX STEER TARGET INDEX TAB, MAX STEER NAMEPLATE SCREW, SELF-TAPPING 6 X.38 INCH DECAL, MAX STEER ID LEFT 1 OR DECAL, MAX STEER ID RIGHT (Not Illustrated) DECAL, BAY I.D. MARKS 3D TARGET (Not Illustrated) 1 * One contains all three 3D target decals (items 6, 7 and 12). Targets are grouped together to have more uniform reflective characteristics. Replacement of all three targets, instead of only one, is recommended HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference

38 HS421 AND HS221 HIGH DEFINITION TARGETS REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING

39 Form 4-162, 10-15c PARTS DESCRIPTION LISTING Sheet 20 of 20 Index Part Number Description Front Targets Rear Targets TARGET ASSEMBLY, RIGHT FRONT (Consisting Of:) 1 OR TARGET ASSEMBLY, RIGHT REAR (Consisting Of:) (Not Illus.) 1 OR TARGET ASSEMBLY, LEFT FRONT (Consisting Of:) (Not Illus.) 1 OR TARGET ASSEMBLY, LEFT REAR (Consisting Of:) (Not Illus.) HOUSING-TARGET OVERMOLD, FRONT 1 OR HOUSING-TARGET OVERMOLD REAR SHAFT, BULLET TARGET 1 OR SHAFT, TARGET, DSP WASHER, FLAT 3/8 INCH 1 OR WASHER, FLAT 3/8 INCH NUT, JAM 3/ PLATE, TARGET BACKUP 1 OR PLATE, TARGET BACKUP FLAT HEAD SHEET METAL SCREW X.5 INCH TARGET ASSEMBLY, FRONT 1 OR TARGET ASSEMBLY, REAR WASHER, SPRING CURVED # NUT, LOCK NYLON INSERT PLATE, UP INDICATOR 1 OR PLATE, UP INDICATOR SPACER-SHAFT RETAINER-SHAFT 1 OR RETAINER-SHAFT DECAL, TURNPLATE SCALE POSITION 1 1 HS421 AND HS221 ADAPTOR SUPPORTS Index Part Number Description Qty KIT, HAWKEYE SCA ADAPTOR SUPPORT FOOT-1/4 INCH RUBBER-1.25 DIA (to double bumper thickness if desired) SCREW-SELF-TAPPING 10-32X.50 INCH (alternative securing hrdw.) NUT, KEPS (alternative securing hrdw.) SUPPORT ASSEMBLY, SENSOR STORAGE SUPPORT ASSEMBLY, SENSOR HANGER MOD CAB FOOT-1/4 INCH RUBBER-1.25 INCH DIAMETER FLAT HEAD SOCKET CAP SCREW 10-32X1.00 INCH NUT-KEPS SLEEVE, RECTANGLE-10 GA TRUSS HEAD MACHINE SCREW X 1/2 INCH (typical securing hrdw.) HHCS-1/4-20X1.25_GR5 (for support installation onto a lift rack) NUT, WEDGE ANCHOR 1/4-20 (for support installation onto a lift rack) WASHER, WEDGE ANCHOR (for support installation onto a lift rack) HUNTER DRIVE BRIDGETON, MO PPP-Paint Code Required A/R-As Required REF-Reference