CHART STABLES. Manufacturers of quality equestrian buildings STABLES

Transcription

1 CHART STABLES Manufacturers of quality equestrian buildings STABLES

2 CONTENTS Stables The Clipper Range The Chart Range The Chester Range Range Comparison American Barns Static Field Shelters & Stores Mobile Field Shelters & Stables The Clipper Range Mobile Field Shelters The Chart Range Mobile Field Shelters The Clipper Range Mobile Stables The Chart Range Mobile Stables Essential items & accessories Ironmongery Mats & Accessories Internal Partitions Stable Doors & Windows Fencing & Gates Doors & Windows Double Doors Wood Finishes Roof Finishes Planning & advice DIY Self-Assembly Planning & Preparation Contacts & Delivery enquiries@chartstables.co.uk

3 CHART STABLES Formed in 1994, Chart Stables is one of the country s largest manufacturers of timber buildings, supplying an impressive CHART STABLES and extensive range, including Stables, Field Shelters and American Barns. We also manufacture Garages, Carriage Houses and Workshops which can be incorporated within your stable yard. Please visit Our overriding aim is to use our many years of expertise in design to complement your ideas and go on to build you a building based on one of our Equestrian ranges. Our facilities and insight enable us to offer a diverse choice depending on budget and personal requirements. When you contact us our ideas will far exceed what we are able to show in our brochure. Our Commitment Our Reputation New Joinery Workshop DIY / Self-Assembly In 2005, we moved to our new purpose built workshops, where our timber buildings are manufactured to the highest standards. Our commitment to customer satisfaction has always been our first priority; we firmly believe that a combination of modern technology and our experienced sales team helps us Our success and reputation is based on providing superior standards of construction, using the most technically advanced design and production facilities, whilst applying traditional craftsmanship, to produce high-quality products. Evidence of the Company s commitment to quality was further We recently opened our own specialist Joinery Workshop allowing us to produce a higher quality and improved range of doors and windows that are either pressure treated or VAC VAC treated for a long life and to be in keeping with the colour and longevity of your stables. All our buildings are available for DIY and self-assembly at a substantial discount. When you order a DIY building from Chart Stables, we ensure that you can assemble your new building as quickly and as simply as possible. When your building arrives, it is ready to put up with self-assembly instructions, remain market leaders in our industry. We work with you through every stage of your project to ensure you are 100% satisfied with the end result. confirmed when we became a certified Quality Assured Company and obtained ISO status in 1998, which has continued to this day. We are also members of the Timber Research and Design Service One of our design team will work with you to create the building you are looking to have. which are straightforward. We have many years experience of helping our clients arrange exportation across Europe and dispatch within the UK. Please do call and we will be delighted Development Association (TRADA). to help you with your project. 3

4

5 STABLES The Clipper Range Pages 6-11 Our starter and most popular range of stables manufactured to the same high standards as our other ranges STABLES We design and build quality, cost-effective stables and working buildings for a diverse range of needs from racing, stud yards and livery stables to equestrian buildings for private use. The three ranges of equestrian buildings Clipper, Chart and Chester are constructed The Chart Range Pages The Chester Range Pages Range Comparison Pages Our middle range carrying many features usually found on more expensive buildings Our flagship stables incorporating strength and additional height with a specification befitting these prestigious equestrian buildings Easily check how our three stable ranges compare with each other using advanced design and production facilities. These facilities, combined with traditional craftsmanship and American Barns Pages An alternative working environment for horse and rider unique insight, enable us to design a building to meet your budget and individual requirements. Static Field Shelters & Stores Pages An ideal way to protect your animals from the cold winds in winter and from the summer heat. Also ideal as an Implement Store or free standing Hay Store L-Shaped Stable Block U-Shaped Stable Block E-Shaped Stable Block All-in-a-line Stable Block Especially suited to a corner location, This design allows for easier Ideal for big commercial yards which Away from all the complex layout this is a very popular style. Both management of horses and staff, so is require distinct separated areas, options, the all-in-a-line option is practical and attractive, this layout particularly well-suited to larger working but still require shared facilities in a ideally suited for the small private yard can provide extra protection from the yards where efficiency is key. This central location, such as Workshops, and is often the simplest and most elements and allows easy viewing and U-Shape design also provides excellent Tack Rooms, Hay Stores and cost-effective option. access to all areas. shelter from the wind. accommodation blocks. 5

6 THE CLIPPER RANGE Our most popular range of stables The Clipper Range is our introductory range of stables manufactured to the same high, exacting standards as our Chart and Chester Ranges. It offers incredible value for money and is priced to include installation at your property. Equally, you can purchase your stables on a self-build, DIY basis. All external timbers and internal panel framing have been pressure treated to protect against wood rot for many years to come and will not require further treatment unless you choose to stain or paint your stables. Your company is excellent, your staff are more than helpful and your lads are very hardworking. My stables are fantastic. Mrs Colgan, N. Yorkshire enquiries@chartstables.co.uk

7 2 x 3.6m x 3.6m Stable, 1 x 3.6 m x 3.6m Hay Store. STABLES THE CLIPPER RANGE 7

8 STANDARD FEATURES OF THE CLIPPER RANGE Structure Main Features All timbers pressure treated excluding roof purlins Framing 75mm x 50mm (3 x 2 ) Canopy Canopy to front of 1.2m (4 ) deep Optional Extras Guttering Front guttering and downpipe Rear guttering Your perfect stable yard To help you create your perfect stable yard we can incorporate a diverse range of buildings. For example, a Carriage House to store hay or a horse box in. A Garage or Office can be included within any complex in order to provide an environment that meets your requirements. Kickboards 15mm (½ ) thick to 1.2m (4 ) high Kickboard to eaves height Upgrade kickboard to 18mm Installation Doors Deep bibs to bottom stable doors to prevent cribbing Top and bottom stable doors have galvanised fittings and fixtures Double or sliding doors to Hay Stores Our installation teams are highly experienced, committed members of our staff who take great pride to ensure your buildings are finished to the highest of standards. Roof Black Onduline roof sheeting A clear roof sheet fitted in the rear of each Stable and Tack Room Coloured Onduline: red, green and brown are available - see page 57 Roof boarding can be fitted to the underside of the Onduline roof sheeting for added insulation Key features of the Clipper Range Windows 458mm x 660mm (18 x 26 ) clear perspex opening window lined internally with safety mesh Upgrade to a Chart or Chester window Talk Grille Not included as standard Four sizes of talk grille available Kickboard, clear Onduline sheet and additional top door. End gable vent. Clipper stable door enquiries@chartstables.co.uk

9 PREPARING FOR YOUR STABLES GO TO PAGE 59 STABLES THE CLIPPER RANGE 9

10 Clipper Range Stables come with deep galavanised bibs to prevent cribbing, a window to the front and a large clear roof sheet to the rear of each Stable and Tack Room enquiries@chartstables.co.uk

11 A SELECTION OF IDEAS IN THE CLIPPER RANGE STABLES THE CLIPPER RANGE 2 x 4.2m x 3.6m Stables 2 x 3.6m x 3.6m Stables 1 x 4.8m x 3.6m Corner Unit 1 x 1.8m x 3.6 Tack Room Windows have been included as an optional extra 2 x 3.6m x 3.6m Stables 3 x 3.6m x 3.6m Stables 1 x 4.8m x 3.6m Corner Unit 2 x 3.6m x 3.6m Stables 1 x 4.8m x 3.6m Hay Store, (extending under the canopy line with double doors) 11

12 THE CHART RANGE Additional strength and further refinement The Chart Range is our middle range. The framing size is increased and offers additional strength for the larger horses along with thicker kickboard and added galvanised anti-chew strips. We offer the versatility to incorporate a Wash Down Bay, Hay Store, a store for the horse box along with Tack Rooms and Feed Stores. I am absolutely over the moon, it s a real dream come true! The horses settled in from day one. Brilliant! Ms K. Paton, Somerset enquiries@chartstables.co.uk

13 STABLES THE CHART RANGE 13

14 STANDARD FEATURES OF THE CHART RANGE Structure Main Features All timbers pressure treated excluding roof purlins Framing 100mm x 50mm (4 x 2 ) Canopy Canopy to front, 1.2m (4 ) deep Optional Extras Increase eaves height to 2.4m (8 1 ) Weatherboard for a more rustic appearance Increase canopy size to 1.8m (6 ) to include support posts and curved bracing Guttering Front guttering and downpipe Rear guttering Kickboards 18mm (¾ ) OS kickboard to 1.2m (4 ) high Extended kickboard up to eaves height The importance of ventilation Regardless of the time of year good ventilation must always be considered. With this in mind we have designed the roof of the Chart Range to include roofing boards to the underside for added insulation but still maintaining good air flow through the eaves and the full length of the ridge line. All stables have vent grilles in the gable ends and fully open trusses between stables. Doors Anti-chew strips to top door opening surrounds. Bottom stable doors have deep galvanised bibs Double doors or sliding doors Roof Black Onduline roof underlined with roofing board 125mm x 50mm (5 x 2 ) roof beams Coloured Onduline: red, green and brown Onduvilla tiles: black, red and brown Key features of the Chart Range Clear roof sheet above each Stable and Tack Room Coloured Felt tiles: red, green, brown or grey - see page 57 Windows 533mm x 915mm (21 x 36 ) two bladed louvred window with galvanised security bars to rear Six-bladed louvre windows Hopper windows Talk Grille A 1162mm x 838mm (46 x 33 ) fitted between each stable Four sizes of talk grille available Doors and windows. 1162mm x 864mm galvanised talk grille. OS Boarded roof and a clear sheet enquiries@chartstables.co.uk

15 STABLES THE CHART RANGE Popular L shaped stable yard giving additional shelter from driving winds and rain. 15

16 A SELECTION OF IDEAS IN THE CHART RANGE 2 x 3.6m x 3.6m Stables 1 x 3.6m x 3.6m Hay Store 2 x 3.6m x 3.6m Stables with a green Onduline roof 3 x 3.6m x 3.6m Stables 1 x 7.2m x 5.4m Hay Store/Garage 3 x 3.6m x 3.6m Stables 1 x 7.2m x 4.8m Hay Store with an additional window fitted to the gable end 3 x 3.6m x 3.6m Stables with double doors in the gable end Extended 1.8m (6 ) deep canopy to front of stables with 150mm x 150mm (6 x 6 ) pressure treated support posts and curved bracing enquiries@chartstables.co.uk

17 STABLES THE CHART RANGE 1 x 3.6m x 3.6m Stable 1 x 4.8m x 3.6m Corners Unit 1 x 1.8m x 3.6m Tack Room 2 x 3.6m x 3.6m Stables 1 x 3.6m x 4.8m Hay Store/Garage extended forward under the canopy 2 x 3.6m x 3.6m Stables 1 x 3.6m x 3.6m Hay Store Implement Store from our Chart Carriage House range 3 x 3.6m x 3.6m Stables 1 x 4.8m x 3.6m Corner Unit INCORPORATE OUR GARAGES & CARRIAGE HOUSES INTO YOUR STABLE YARD 17

18 THE CHESTER RANGE Our top flagship range Our top Chester Range, is built to our highest specifications including increased height to eaves of 2.4m (8 1 ) and 3.3m (11 ) to ridge. Head clearance through stable doors is also increased to 2.234m (7 4 ) and all stable doors are hung in separate door frames completely encased in galvanised anti-chew stripping. The standard 1.2m (4 ) canopy to front of the stables can be extended to 1.8m (6 ) supported by impressive 150mm x 150mm (6 x 6 ) pressure treated support posts and curved bracing creating a covered walkway to the front of the buildings enquiries@chartstables.co.uk

19 Thank you and all your staff for the excellent service provided last week. From point of order to delivery and erection, your staff were helpful, informative and polite. Thanks again Mr Parker, Kent STABLES THE CHESTER RANGE 19

20 STANDARD FEATURES OF THE CHESTER RANGE Structure Main Features All timbers pressure treated excluding roof purlins Eaves height to 2.4m (8 1 ) and door height of 2235mm (7 4 ) and 3.3m to ridge Framing 100mm x 50mm (4 x 2 ) Canopy 1.2m (4 ) canopy underlined in 6mm plywood to front of all units Optional Extras Weatherboard for a more rustic appearance Increase canopy size to 1.8m (6 ) to include support posts and curved bracing Clay or Slate tiles as a preferred finish The strength of our Chester range is ideally suited to take clay or slate tiles. The standard roof structure of The Chester Range can be upgraded to specialist roof trusses specifically designed for this purpose. You can choose to pitch your roof up to 350 to suit your preferred slate or clay tile finish. See page 22 and 23. Guttering Front guttering and downpipe Rear guttering Kickboards 18mm (¾ ) plywood kickboard to 1.2m (4 ) high Extended kickboard up to eaves height Doors Stable doors hung in separate door frame, encased in galvanised anti-chew strip Double doors or sliding doors American Barn top doors Roof Black Onduline roof with a clear roof sheet Lined to the underside with a roofing board 125mm x 50mm (5 x 2 ) roof purlins Coloured Onduline: red, green and brown Onduvilla tiles: black, red and brown Coloured Felt tiles: red, green, brown or grey Upgrade to clay or slate tiles - see page 57 Key features of the Chester Range Windows Talk Grille Six-bladed louvered windows, fitted with galvanised security bars Galvanised 1727mm x 864mm (68 x 34 ) American Barn top doors Hopper windows Four sizes of talk grille available Chester Range Stable doors and six-bladed louvre windows. Internal view of kickboard lined to eaves and talk grille. Roof lining and a clear Onduline roof sheet enquiries@chartstables.co.uk

21 REFER TO ALTERNATIVE ROOF FINISHES ON PAGE 57 STABLES THE CHESTER RANGE Stables incorporating 750mm high brickcourse, in keeping with the design of neighbouring buildings. 21

22 A SELECTION OF IDEAS IN THE CHESTER RANGE 4 x 3.6m x 3.6m Stables 1 x 4.8m x 3.6m Corner Unit 4 x 3.6m x 3.6m Stables 2 x 4.8m x 3.6m Corner Units, 1 x 10.9m x 3.6m Hay Store Chester Stable Block showing additional 1.2m (4 ) canopy to the rear and brown felt tiles American Barn top doors to rear of stables Traditional stable yard including open-fronted Hay Store SEE OUR GARAGE AND CARRIAGE HOUSE BROCHURE FOR COMBINATION IDEAS enquiries@chartstables.co.uk

23 STABLES THE CHESTER RANGE Chester Stables with a clay-tiled roof at 30 o installed onto five course high dwarf wall Bottom stable door altered to suit the smallest of ponies 3 x 3.6m x 3.6m Stables 1 x 4.8m x 3.6m Corner Unit, 1 x 3.6m x 3.6m Hay Store L-shaped Stables showing 1.8m (6 ) extended canopy, support posts and curved bracing Stables incorporating open-fronted car port and pergola An L-shaped Stable complex with clay tiled roof including hip ends. Impressive equestrian yard with clay tiles, stained weatherboard exterior cladding on a nine coarse high dwarf wall. 23

24 RANGE COMPARISON The table opposite allows you to compare features and optional extra across our three stable ranges, at a glance. We have had great pleasure from the stable. They appear to have incurred the approval of their occupants too! S. Wheatley, Essex enquiries@chartstables.co.uk

25 Structure The Clipper Range The Chart Range The Chester Range Main Features Optional Extras Main Features Optional Extras Main Features Optional Extras All timbers pressure treated excluding roof purlins All timbers pressure treated excluding roof purlins Increase eaves height to 2.4m (8 1 ) Weatherboard for a more rustic appearance All timbers pressure treated excluding roof purlins Eaves height to 2.4m (8 1 ) and door height of 2235mm (7 4 ) and 3.3m to ridge Framing 75mm x 50mm (3 x 2 ) 100mm x 50mm (4 x 2 ) 100mm x 50mm (4 x 2 ) Canopy Canopy to front of 1.2m (4 ) deep Canopy to front, 1.2m (4 ) deep Increase canopy size to 1.8m (6 ) to include support posts and curved bracing 1.2m (4 ) canopy underlined in 6mm plywood to front of all units Weatherboard for a more rustic appearance Increase canopy size to 1.8m (6 ) to include support posts and curved bracing Guttering Front guttering and downpipe Rear guttering Front guttering and downpipe Rear guttering Front guttering and downpipe Rear guttering Kickboards 15mm (½ ) OS kickboard to 1.2m (4 ) high Kickboard lining to eaves height Upgrade kickboarding to 18mm 18mm (¾ ) OS kickboard to 1.2m (4 ) high Kickboard lining to eaves height 18mm (¾ ) plywood kickboard to 1.2m (4 ) high Kickboard lining to eaves height STABLES OUR RANGE COMPARISON CHART Doors Anti-Chew strips cap the top of the bottom stable door extending 380mm (15 ) down the front Double or sliding doors to Hay Stores Anti-Chew strips cap the top of the bottom stable door extending 380mm (15 ) down the front and around the top door surround Double doors or sliding doors Stable doors hung in separate door frames, encased in galvanised anti-chew strip. Anti-Chew strips cap the top of the bottom stable door extending 380mm (15 ) down the front and to the leading edge of the top stable door Double doors or sliding doors American Barn top doors Roof Black Onduline roof sheeting A clear roof sheet fitted in the rear of each Stable and Tack Room Coloured Onduline: red, green and brown are available - see page 57 Roof boarding can be fitted to the underside of the Onduline roof sheeting for added insulation Black Onduline roof underlined with 11mm OS roofing board 125mm x 50mm (5 x 2 ) roof purlins Clear roof sheet above each Stable and Tack Room Coloured Onduline: red, green and brown Onduvilla tiles: black, red and brown Coloured Felt tiles: red, green, brown or grey - see page 57 Black Onduline roof with a clear roof sheet Lined to the underside with 11mm OS roofing board 125mm x 50mm (5 x 2 ) roof purlins Coloured Onduline: red, green and brown Onduvilla tiles: black, red and brown Coloured Felt tiles: red, green, brown or grey Upgrade to clay or slate tiles - see page 57 Windows 458mm x 660mm (18 x 26 ) clear perspex opening window Upgrade to a Chart or Chester window 533mm x 915mm (21 x 36 ) two bladed louvred window with galvanised security bars to rear Six-bladed louvre windows Hopper windows 533mm x 915mm (21 x 36 ) six bladed louvred window with galvanised security bars to rear American Barn top doors Hopper windows Talk Grille Not included as standard Four sizes of talk grille available 1162mm x 864mm (46 x 34 ) fitted between stables Four sizes of talk grille available 1727mm x 864mm (68 x 34 ) fitted between stables Four sizes of talk grille available 25

26 AMERICAN BARNS American Barns are highly efficient buildings with many uses. An efficient working environment Everything is kept under one roof which allows horse and rider to remain warm and dry during the winter but cool in the summer. BECOMING MORE POPULAR

27 AMERICAN BARNS FEATURES We offer two ranges Key Features AMERICAN BARNS Standard Range Deluxe Range Standard Range. Top doors can be fitted as optional extras. A pair of double doors have been fitted, replacing the standard sliding doors. Structure Internal Stalls Guttering Kickboards Walls are built with 100mm x 50mm (4 x 2 ) pressure treated timber framing, spaced at 600mm (2 ) centres 100mm x 50mm (4 x 2 ) and are 18mm OS kickboard lined to 1.2m (4 ) high and the upper section is constructed using 20mm galvanised steel bars spaced at 75mm (3 ) centres Half-round, black guttering and downpipes are fitted to both sides of the building 18mm (¾ ) OS kickboards to 1.2m (4 ) high Walls are built with 100mm x 50mm (4 x 2 ) pressure treated timber framing, spaced at 600mm (2 ) centres Galvanised metal framed lower section infilled with 32mm softwood to 1.2m (4 ) high Upper section constructed using 20mm galvanised steel bars spaced at 75mm (3 ) centres Dividing panels can be infilled to eaves height Panel height 2200mm (86 ). Reconstituted plastic or hardwood infills available as an option Half-round, black guttering and downpipes are fitted to both sides of the building 18mm (¾ ) plywood kickbord 1.2m (4 ) high Doors Sliding external door Side hinged stable doors Sliding external door side hinged or sliding stable doors Roof Black Onduline roof sheeting, one clear roof sheet per stall Black Onduline roof sheeting underlined with 11mm OS roofing board and one clear roof sheet per stall Windows A choice of windows is available as optional extras A choice of windows is available as optional extras Ventilation Two louvred ventilation grilles are fitted to each gable end Two louvred ventilation grilles are fitted to each gable end Deluxe Range. Internal view of 12 x 3.6m x 3.6m Stables. Barge Boards All in pressure treated, prepared timber, fixed with rust-resisting nails All in pressure treated, prepared timber, fixed with rust-resisting nails 27

28 STATIC FIELD SHELTERS & STORES Our Static Field Shelters have a multiple of uses An ideal way to protect your animals from the cold winds in winter and from the summer heat or perfect as an Implement Store or free standing Hay Store. Static Field Shelters are available in all ranges. All feature 2.1m (7 ) wide openings which can be altered in size. All our Static Field Shelters can be supplied with or without a 1.2m (4 ) canopy. Main Features StructureAll timbers pressure treated excluding roof purlins Framing Canopy Kickboards Doors 75mm x 50mm (3 x 2 ) or 100mm x 50mm (4 x 2 ) timber framing With or without a 1.2m (4 ) canopy OS kickboard to 1.2m (4 ) high Buildings can be supplied with either double or sliding doors; metal or timber gates Roof Range of roof finishes available - See page enquiries@chartstables.co.uk

29 We work with you to design a building to suit your needs. All our buildings are manufactured individually to meet your requirements. STATIC FIELD SHELTERS & STORES 7.2m x 3.6m Field Shelter with a 1.2m canopy fitted with metal gates. 10.9m x 3.6m Implement Store, 2 x 3.0m wide openings. 7.2m x 3.6m Field Shelter with no canopy. 29

30 7.2m x 3.6m (24 x 12 ) mobile building incorporating a Stable and a Field Shelter with a five bar metal gate enquiries@chartstables.co.uk

31 MOBILE FIELD SHELTERS & STABLES Available quickly and installed without fuss Mobile Field Shelters and Stables offer greater flexibility with the added bonus of avoiding the expense of groundworks and are available for quick delivery to you and installed at your location by one of our teams. MOBILE FIELD SHELTERS & STABLES The Clipper Range Mobile Field Shelters Pages The Chart Range Mobile Field Shelters Pages The Clipper Range Mobile Stables Pages The Chart Range Mobile Stables Pages The Clipper Range offers you the ideal low-cost movable option The Chart Range of Mobile Field Shelters are upgraded to include enhanced features The Clipper Range of Mobile Stables offer a quick and cost-effective way of providing shelter for your animals The Chart Range of Mobile Stables are upgraded to include enhanced features 31

32 THE CLIPPER RANGE MOBILE FIELD SHELTERS Our ever popular starter range Structure Main Features All timbers pressure treated excluding roof purlins The Clipper Range features external treated timbers as well as a choice of exterior claddings. We offer either pressure treated timber skids or metal skids. A 1.2m (4 ) canopy to the front is usually preferred but you can choose not to have a canopy. Conversion kits are available to turn your Mobile into a versatile, multi-functional building e.g. Stable, Hay Store or convert part of your Mobile into a Tack Room. Framing Canopy Guttering 75mm x 50mm (3 x 2 ) pressure treated timber framing With or without 1.2m (4 ) canopy to front Guttering and downpipe Kickboards 15mm OS kickboard to 1.2m (4 ) high Mobility Roof 150mm x 75mm (6 x 3 ) pressure treated timber skids or 80mm x 40mm (3¼ x 1½ ) metal skids Heavy-duty chain supplied for towing Black Onduline roof Key features of the Clipper Range Timber skids. Metal skids. Clipper Range kickboard enquiries@chartstables.co.uk

33 Create a building with a combination of uses 1 x 3.6m x 3.6m Mobile Field Shelter on timber skids. MOBILE FIELD SHELTERS - THE CLIPPER RANGE 1 x 10.9m x 3.6m Mobile Field Shelter fitted with 2.1m metal gates. 1 x 7.2m x 3.6m Mobile Field Shelter with heavy duty chain supplied. 1 x 7.2m x 3.6m Field Shelter with an integrated Stable. 33

34 THE CHART RANGE MOBILE FIELD SHELTERS Upgraded to include added features The Chart Range includes galvanised anti-chew strips encasing the vertical side of each opening. A timber slip-rail and pair of galvanised brackets are fitted across each opening. All our buildings are treated to protect against wood rot on all timbers excluding roof purlins. The internal kickboard is upgraded to 18mm thickness. Structure Framing Canopy Openings Guttering Main Features Pressure treated timbers externally and internally (not including roof purlins) 100mm x 50mm (4 x 2 ) timber framing With or without 1.2m (4 ) canopy to front Timber slip rail and galvanised brackets to each opening Guttering and downpipe Kickboards 18mm (¾ ) OS kickboard to 1.2m (4 ) high Mobility Roof Anti-Chew 150mm x 75mm (6 x 3 ) pressure treated timber skids or 100mm x 100mm (4 x 4 ) galvanised metal skids Heavy-duty chain supplied for towing Black Onduline roof Anti-chew strips to vertical sides of openings Key features of the Chart Range Mobile Field Shelters Timber skids.. Galvanised metal skids. 18mm OS kickboard enquiries@chartstables.co.uk

35 7.3m x 3.6m Double Mobile Field Shelter with timber Utility Gates. INCLUDES ENHANCED FEATURES MOBILE FIELD SHELTERS - THE CHART RANGE Excludes a canopy to the front. 1 x 7.2m x 3.6m Mobile Field Shelter with 2 x 2.1m openings. Slip rails are supplied as standard, but you may wish to consider a timber or metal gate. 35

36 THE CLIPPER RANGE MOBILE STABLES The quick and cost-effective way of providing shelter for your animals The Clipper Range features external treated timbers as well as a choice of exterior claddings. We offer either pressure treated timber or galvanised metal skids. A 1.2m (4 ) canopy to the front is usually preferred, but you can choose not to have a canopy. Main Features Structure Pressure treated external timbers Framing 75mm x 75mm (3 x 2 ) timber framing Canopy 1.2m (4 ) canopy Guttering Front guttering and downpipe Doors Top and bottom stable doors Kickboards 11mm OS kickboards to 1.2m (4 ) high Mobility Roof 150mm x 75mm (6 x 3 ) pressure treated timber skids or 80mm x 40mm (3¼ x 1½ ) metal skids. Heavy-duty chain supplied for towing Black onduline roof including a clear roof sheet Designed for specific needs of an agricultural training college enquiries@chartstables.co.uk

37 Combination Stable and Tack Room. Combination Units are becoming the norm, incorporating Hay Stores or a Tack Room or an open Field Shelter. MOBILE STABLES - THE CLIPPER RANGE Clipper Range triple Mobile Stable. Tack Room and Stable combination 37

38 THE CHART RANGE MOBILE STABLES Upgraded to include enhanced features The Chart Range includes extensive galvanised anti-chew strips to the bottom stable doors, an opening window, a thicker kickboard and a guarantee against wood rot on all timbers excluding roof purlins for many years to come. Main Features Structure Pressure treated timbers externally and internally (not including roof purlins) Canopy 1.2m (4 ) canopy Windows Doors Kickboards Mobility Roof Talk Grille 533mm x 915mm (21 x 36 ) two bladed louvre window with galvanised security bars fitted to rear Stable door with added galvanised chew strip to top door opening surround 18mm (¾ ) OS kickboard to 1.2m (4 ) high 150mm x 75mm (6 x 3 ) pressure treated timber or 100mm x 100mm (4 x 4 ) metal skids. Heavy-duty chain supplied for towing Onduline roof underlined with a roofing board. A clear roof sheet fitted to the rear of each stable Talk grille fitted to the dividing panel in double and treble units measuring 1162mm x 864mm (46 x 34 ) enquiries@chartstables.co.uk

39 A Chart Range double Mobile Stable unit. Timber skids are available in lengths up to 7m (23 ). Alternatively, metal skids are available in sizes up to 10.9m (36 ). MOBILE STABLES - THE CHART RANGE A Chart Range triple Mobile Stable unit. 39

40

41 ESSENTIAL ITEMS & ACCESSORIES In this section you ll find everything else you need to enhance or add to your stable building and its surroundings. We offer a wide selection of ironmongery as well as a selection of doors and windows to match our three stable ranges. We produce joinery grade doors and windows if you require something more refined. You ll also find a choice of roof finishes and exterior cladding. Ironmongery Page 42 Mats & Accessories Page 43 Internal Partitions Pages Stable Doors & Windows Page Fencing & Gates Pages Hinges, bolts, talk grilles, hay racks and more for your equestrian building Essential items to bring more functionality to your stable and a variety of good quality stable mats A cost-effective way of converting redundant farm buildings into working spaces Doors and windows to match our three stable ranges and more A wide range of fencing and gates in an array of sizes and designs ESSENTIAL ITEMS & ACCESSORIES Doors & Windows Pages Double Doors Pages Wood Finishes Pages Roof Finishes Pages A small selection of the available styles, sizes and configurations of our joinery grade doors and windows usually kept for our garages and carriage houses A range of double doors are available Choice of exterior claddings and wood protection A range of roof finishes and colours to suit different buildings and budgets 41

42 IRONMONGERY Adjustable Hook and Band Hinges pair 350mm (14 ) 450mm (18 ) 600mm (24 ) mm mm mm Auto-Lock Animal Bolt 230mm (9 ) 6.00 Ring on Plate 50mm x 50mm (2 x 2 ) 1.95 Internal Talk Grilles 1162mm (w) x 864mm (h) 1727mm (w) x 864mm (h) 3495mm (w) x 864mm (h) S M L Kick Over Latch 240mm (9 ½ ) 7.45 Monkey Tail Bolt 450mm (18 ) 8.95 Staple on Plate 1.25 Door Grilles 890mm (w) x 610mm (h) 1040mm (w) x 760mm (h) 1170mm (w) x 760mm (h) S M L Garage Bolt Door 450mm (18 ) 7.95 Hook on Plate 1.25 Heavy-Duty Wall Hay Rack 500mm (h) x 760mm (w) x 420mm (d) Pad Bolt With elongated keep (not shown) 200mm (8 ) 4.50 Ring on Eye Bolt 75mm x 200mm (3 x 8 ) 3.45 Bucket Clip 3.95 Heavy-Duty Corner Hay Rack 630mm (h) x 860mm (w) x 530mm (d) 55 Tower Bolt 150mm (6") 1.80 Corner Manger Frame Anti-Weaver Infill Panel Small to suit 890mm Medium to suit 1040mm Large 1170mm S M L Bucket Holder Heavy-duty wall fix Heavy-duty hook over Cast Cabin Hooks 100mm (4") 150mm (6") mm mm Slip-Rail Bracket 100mm x 50mm (4 x 2 ) 8.95 Anti-Weaver Grille 1170mm (w) x 760mm (h) These prices exclude VAT enquiries@chartstables.co.uk

43 MATS Wycombe Shelter Mats Made from rubber, this mat is ideal for Mobile Field Shelters. 1850mm x 1200mm x 17mm 40kg Wycombe Stable Mats Made from non-porous solid rubber, this mat has a wide rib top surface with a fine rib base. A good mat for all stables, horse boxes or walkway areas. 1850mm x 1200mm x 17mm 40kg Ground Ring Mats The ideal solution for muddy gateways. Free draining perforated mats to create a stable walking surface. Use single or cable-tie together. 1500mm x 1000mm x 16mm 14kg 1500mm x 1000mm x 23mm 18kg ACCESSORIES Plastic Feed Scoop Available in red, blue or green 7.50 Corner Manger Frame Available in red, blue or green Folding Saddle Rack Available in red or green Hook Over Manger With handle Manure Rake Manure Collector Plastic Shovel Saddle Rack Available in black or red Flat-Sided Bucket 4 gallon Stall Chain ESSENTIAL ITEMS & ACCESSORIES IRONMONGERY MATS ACCESSORIES Eva Wall Boards Suitable for both stable and horse box walls, these lightweight energy wall boards will provide the ultimate protection for your horses. 1830mm x 1200mm x 10mm 4.5kg 1830mm x 1200mm x 15mm 6kg Salt Lick Holder Black or red finish 4.95 Rug Rail Prices of above on application. 43

44 INTERNAL PARTITIONS A cost-effective way of converting redundant farm buildings into working spaces. Partitions Main Features Partitions are manufactured using 22mm bars spaced at 53mm and are fully galvanised Centre partitions have infills to 1.2m and 22mm bars above Optional Extras Partitions can be supplied completely infilled Swivel mangers can be fitted Partitions with hardwood infills and lower doors. We offer a selection of softwood or hardwood internal partitions. Doors Lower doors are supplied as standard with 32mm softwood infills Various door options are available which include: full doors, sliding doors, and top doors with complete grille or with antiweaver grilles Complete sliding door with grille. Dividing partition with softwood infills enquiries@chartstables.co.uk

45 ESSENTIAL ITEMS & ACCESSORIES INTERNAL PARTITIONS Partitions can be dismantled and re-assembled should you need to move them. 45

46 STABLE DOORS & WINDOWS Stable Doors Tack Room Doors The Clipper Range Top door 1207mm x 724mm (47½ x 28½ ) Ledged and braced Galvanised 350mm (14 ) adjustable hook and band hinges Bottom door 1207mm x 1321mm (47½ x 52 ) Pressure treated Lined with 18mm OSB boarding to the interior Shiplap cladding Anti-chew strip capping and extending 380mm (15 ) down the front of bottom door Galvanised 450mm (18 ) adjustable hook and band hinges 46 The Chart Range Top door 1207mm x 724mm (47½ x 28½ ) Ledged and braced Galvanised 450mm (18 ) adjustable hook and band hinges Anti-chew strips to top door surround Bottom door 1207mm x 1321mm (47½ x 52 ) Pressure treated Lined with 18mm OSB boarding to the interior Shiplap cladding Anti-chew strip capping and extending 380mm (15 ) down the front of bottom door Galvanised 600mm (24 ) adjustable hook and band hinges enquiries@chartstables.co.uk The Chester Range Top door 1207mm x 889mm (47½ x 35 ) Chew strips to complete frame Ledged and braced Galvanised 600mm (24 ) adjustable hook and band hinges Bottom door 1207mm x 1321mm (47½ x 52 ) Pressure treated Lined with 18mm plywood boarding to the interior T.G.V cladding Anti-chew strip capping and extending 380mm (15 ) down the front of bottom door Galvanised 600mm (24 ) adjustable hook and band hinges Hung in separate door frame encased in anti-chew strips Clipper Tack Room Door 762mm x 2057mm ( 30 x 81 ) Pressure treated Framed, ledged and braced Shiplap Cladding Chart Tack Room Door 838mm x 2057mm (33 x 81 ) Pressure treated Framed, ledged and braced Shiplap Cladding Please Note: We reserve the right to alter our specifications without notice. Our sawn dimensions are slightly smaller after planing.

47 Chester Tack Room Door 3 Piece Pony Door Stable Windows Clipper 457mm x 660mm(18 x 26 ) Galvanised mesh to inside of window Pressure treated Opening Perspex window Chart 533mm x 915mm (21 x 36 ) Galvanised metal safety bars to inside of window Pressure treated Two Bladed opening louvered window Clear Perspex Chester 533mm x 915mm (21 x 36 ) Galvanised metal safety bars to inside of window Pressure treated Six Bladed opening louvered window Clear Perspex ESSENTIAL ITEMS & ACCESSORIES STABLE DOORS & WINDOWS 915mm x 1981mm (36 x 78 ) Pressure treated Rebated, framed, ledged and braced T.G.V Cladding 6mm Ply lined on the inside Hung in a separate door frame Hopper (Optional Extra) Hopper (Optional Extra) 630mm x 914mm (24⅞ x 36 ) 1200mm x 914mm (47¼ x 36 ) Galvanised metal safety bars to inside of window and vent opening Pressure treated Bottom fixed, top vent opening clear Perspex window Galvanised metal safety bars to inside of window and vent opening Pressure treated Bottom fixed, top vent opening clear Perspex window 47

48 FENCING & GATES Chart Fencing can supply a wide range of gates in an array of sizes, from traditional timber Utility or Yeoman gates through to galvanised metal field gates. We offer softwood and oak gate posts in various girths. Post & Rail Fencing Main Features Stock Fencing Main Features Electric Fencing Main Features Field & Utility Gates Main Features Machine finished or cundy-peeled timbers Heavily galvanised to BS EN Class A Unbeatable Clipper packaged kits, both mains and battery powered Wide range of gates in an array of sizes to suit your individual requirements, from traditional timber gates through to galvanised stock gates Ready for nailing direct to the post or the posts can be morticed Features the Hi-Tensile hinged joints Available for: Chickens, Horses, Goats, Alpacas, Pigs, Rabbits Ideal for farm, field or forestry Pressure treated to ensure a long maintenance-free life Trusted by thousands of horse owners Double-crossed bracing makes the utility gate exceptionally strong Optimum stay and line wire spacing for strength and durability Available in a choice of treated softwood or Sapele enquiries@chartstables.co.uk

49 PREMIUM HORSE FENCING Premium horse fencing is renowned in which covers every application - from equestrian circles for providing the most cost protecting horses and cattle to poultry and effective way of protecting horses specifically pets. We can also offer a Solar Power, low designed with optimum wire spacing s to maintenance, integral battery (containing reduce the risk of escape. We can offer NO harmful acids), 3-year warranty, working a comprehensive electric fencing range from daylight, not just sunlight. Premium Horse Fencing Main Features Heavily galvanised to BS Class A Durable and long lasting Hi-Tensile hinge joint Unparalleled impact resistance Ready-to-go electric kits Solar Power ESSENTIAL ITEMS & ACCESSORIES HORSE FENCING & GATES 49

50 DOORS A selection of the styles, sizes and configurations of our external doors and windows. Usually kept for our Garages, Carriage Houses and Workshops. New Joinery Workshop We recently opened our own specialist Joinery workshop allowing us to French double doors 1168mm x 1981mm (46 x 78 ) French double doors 1168mm x 1981mm (46 x 78 ) Hardwood top and bottom stable door 838mm x 1981mm (33 x 78 ) 6 pane softwood personal door 838mm x 1981mm (33 x 78 ) produce a higher quality and improved range of doors and windows than we have been able to source in the past. All our doors and windows are now joinery grade and either pressure treated or VAC VAC treated for a long life and to be in keeping with colour and longevity of your building. Pressure treated 2 x 14mm double glazed full height panes with toughened glazing Complete with separate frame, cill and five lever mortice lock, outward opening Pressure treated Bottom 1 / 3 timber infilled with T.G.V 14mm Double glazed panes with toughened glazing Complete with separate frame, cill and five lever mortice lock, outward opening Not pressure treated Hardwood Stable Door Double glazed nine panes to top door Inward opening complete with separate frame and cill Yale lock and brass cylinder pull Not pressure treated Timber Lower Section 14mm Double glazed units to top half Inward opening complete with separate frame and cill Yale lock and brass cylinder pull enquiries@chartstables.co.uk Please Note: We reserve the right to alter our specifications without notice. Our sawn dimensions are slightly smaller after planing.

51 WINDOWS Single glazed windows 3mm glass. Choice of casement styles. 550mm x 660mm (21 x 26 ) One opening pane Pressure treated 1460mm x 660mm (57 x 26 ) Two fixed panes and one opening pane Pressure treated 990mm x 660mm (39 x 26 ) One fixed and one opening pane Pressure treated 14mm double glazed vent and casement windows Standard height 1050mm (25 x 41 ) others available. 631mm x 1050mm (25 x 41 ) One side opening pane Pressure treated 630mm x 1050mm (25 x 41 ) Top vent opening, bottom fixed pane Pressure treated 915mm x 1050mm (36 x 41 ) One fixed and one side opening pane Pressure treated 1200mm x 1050mm (47 x 41 ) One fixed and one side opening pane Pressure treated 1200mm x 1050mm (47 x 41 ) Top vent opening, one side opening pane and fixed pane Pressure treated ESSENTIAL ITEMS & ACCESSORIES BUILDING GRADE DOORS & WINDOWS 1740mm x 660mm (68 x 26 ) Three fixed panes and one opening pane Pressure treated 1769mm x 1050mm (70 x 41 ) One fixed and two side opening panes Pressure treated 1200mm x 440mm (47 x 17 ) Vent opening Pressure treated Prices of individual doors and windows on application. 51

52 DOUBLE DOORS Double Doors for Hay Stores The Clipper 2286mm x 2057mm (90 x 81 ) Shiplap Cladding Pressure treated Framed, ledged and braced The Chart 2286mm x 2057mm (90 x 81 ) Shiplap Cladding Pressure treated Morticed, framed, ledged and braced Hung in a separate frame The Chester 2286mm x 2261mm (90 x 89 ) T.G.V Cladding Pressure treated Morticed, ledged and braced frame, rebated and infilled with T.G.V Hung in a separate frame Glazed Double Doors 2134mm x 1981mm (84 x 78 ) Single Glazed Pressure treated Two rows of six panes running across the top of each door Morticed, ledged and braced frame, rebated and infilled with T.G.V Hung in a separate frame Personal Doors for Workshop and Offices The Chart 838mm x 1981mm (33 x 78 ) Shiplap Cladding Pressure treated Morticed, framed, ledged and braced Hung in a separate frame The Chester 838mm x 1981mm (33 x 78 ) T.G.V Cladding Pressure treated Rebated, morticed ledged and braced Hung in a separate frame enquiries@chartstables.co.uk Please Note: We reserve the right to alter our specifications without notice. Our sawn dimensions are slightly smaller after planing.

53 ESSENTIAL ITEMS & ACCESSORIES DOUBLE DOORS 53

54 WOOD FINISHES Shiplap A smooth planed, rebated board that finishes with a grooved effect available in Ex 16mm x 150mm or Ex 19mm x 125mm nominal sizes. Weatherboard A sawn tapered, overlapping board, available in Ex 22mm x 150mm or Ex 32mm x 175mm nominal sizes. Log lap A planed rebated board that gives a log cabin effect from the outside. Available in 22mm x 100mm nominal size enquiries@chartstables.co.uk Please Note: We reserve the right to alter our specifications without notice. Our sawn dimensions are slightly smaller after planing.

55 Pressure treatment to protect your buildings for a long life Effective long-term protection against fungal and insect attack. Proven performance, widely used and accepted worldwide. An established and proven alternative to traditional (CCA) treated timber. ESSENTIAL ITEMS & ACCESSORIES WOOD FINISHES & TREATMENTS To ensure maximum life expectancy and prevent the need for further protection, we manufacture your building using pressure treated timber which has been impregnated under controlled conditions in a vacuumpressure impregnation plant. This treatment must not be mistaken for dipped or sprayed timber, which would require treating every year. 55

56 ROOF FINISHES At Chart Stables we listen to your preferences, discuss which of our ranges is most appropriate and incorporate your ideas into the finished design We offer a variety of wood and roof finishes and colours. Roofing Options Coloured Onduline roof sheets enquiries@chartstables.co.uk Clear Onduline roof sheet 11mm OS Board to underside of Onduline Onduvilla Green mineral felt Felt tiles Cedar shingles, clay or slate tiled roofs Increase canopy from 1.2m (4 ) to 1.8m (6 ) including support posts and curved bracing All prices of the above on application Please Note: We reserve the right to alter our specifications without notice. Our sawn dimensions are slightly smaller after planing.

57 Onduline Roof Sheet Onduline is a tried-and-tested roofing material which is used by the majority of stable manufacturers. Black Onduline is supplied as standard, but red, brown and green are also available. Onduvilla Tiles Onduvilla is a popular alternative to Onduline but offers a tiled effect design. Available in black, shaded brown and shaded red. Clay and Slate Tiles Our Chester Range of buildings are designed to support a variety of clay and slate tiles. These do, however, significantly alter the way in which the roof needs to be constructed and will include specialist trusses. Tapco Slate This tile looks just like Welsh Slate but is manufactured from a recyclable blend of limestone and polypropylene. Unlike natural slate, Tapco Slate will not break or delaminate. These slates are created with moulds cast from real slate in order to give an authentic look. ESSENTIAL ITEMS & ACCESSORIES OPTIONAL ROOF FINISHES Felt and felt tiles Felt is a durable and economic way to weatherproof your timber building, and felt tiles can be accepted as a replacement for clay tiles by some local authorities. Our felt products are available in a choice of colours. Cedar Shingles Cedar shingles can be used as an attractive and natural-looking alternative to conventional tiles. 57

58 OUR EXPERTS ARE HERE TO HELP

59 PLANNING & ADVICE Our technical and customer support team are here to offer advice based on many years of experience and we will gladly work with you to bring your ideas to fruition. We will also prepare your design to meet the needs of your local Planning Department if and only if, submission is required. DIY Self-Assembly Pages Planning & Advice Pages Make savings by choosing to self-assemble Our experts can talk you through the complete design and planning process PLANNING & ADVICE For some, knowing what they want in a building design is immediate, for others it can take much longer. Either way we are here to offer advice and support throughout your project. Contacts & Delivery Page 65 Delivery charges according to area We install 95% of the buildings we manufacture. For those who purchase a building from us for self-assembly, we provide self-assembly details for your building and one of our senior installers is always available by phone should you need advice during your installation. For those exporting a building abroad to mainland Europe, our knowledge is broad and based on many years of our buildings going to France and as far south as Spain and Greece. Our overriding aim is to ensure the purchase of your Chart Stable or Chart Garage is as smooth as possible. 59

60 DIY, SELF ASSEMBLY Make savings by choosing to self-assemble When you order your stable for DIY or Self-Assembly, we aim to ensure the installation of your stables is as straight forward as possible. Your building is designed and manufactured at our Workshops in Kent and when you come to erect your building, we are on hand to provide support if required. Main Features All the panels are pre-clad and ready to bolt down onto your brickwork Apexes have the joist holders fitted and are ready to be placed on the end gable walls Doors come with all the necessary ironmongery Roof purlins, kickboards, roof sheeting, fascia boards, barge boards and finishing strips are all cut to size and ready to fit Detailed assembly instructions accompany your building Please Note: We reserve the right to alter our specifications without notice. Our sawn dimensions are slightly smaller after planing.

61 6 x 3.6m x 3.6m Chesters ready for felt, battening and tiling. Our buildings can be adapted to take the weight of slate or clay tiles by fitting specialist roof trusses. PLANNING & ADVICE DIY SELF ASSEMBLY L shape unit with 1.8m canopies and support posts. 3 x 3.6m x 3.6 Stables 1 x 1.8m x 3.6m Tack Room. 61

62 PLANNING & PREPARATION Our experts can talk you through the complete design and planning process as well as any groundworks that may need to be completed prior to assembly. Planning & Advice Service Our experts can help guide you through the planning process, as well as providing elevated drawings for your planning application, should you require permission. Contact us for more detailed information on planning requirements particular to your building. Do I need Planning Permission? Whilst this may not be the answer, you want to hear, in 99% of cases, the answer is yes. We would always suggest that a telephone call to your local Council is a good idea. They will give you some good, free advice and, in most cases, visit you. Listening to their suggestions in the first place may possibly save you time and money. Whilst we cannot give you the advice that a Planning Consultant can, we are able to offer you a helping hand, based on our experience over the years. How long will Planning Permission take to obtain? Approximately eight weeks. Can I replace old buildings? Yes, but always make sure you are building like-for-like. Do not exceed the original ground floor area or height. Take some photographs of the original buildings. You may well still have to go through a planning process. How do I go about getting Planning Permission? Firstly, you will need to ask you local Council for the necessary forms. These are not as daunting as you may think. The Council will need a scaled site plan, clearly marked with the position of your new buildings and six copies of elevated drawings. We can supply elevated drawings to you, if required. Finally, a cheque will need to be sent to the Council along with your application. Groundwork Project Completion On the delivery day, it is imperative that our team can get easy and close access to the erecting site. They will work productively and courteously and leave the site tidy. On completion, our senior installer will require you to ensure everything has been carried out to your satisfaction and will then require the final payment. Our overriding aim at Chart Stables is to ensure that you have many years of enjoyment from your building. The extent of the base works will vary depending on the building you are having, the ground conditions and the amount of money you want to spend. In some cases, the base works can be as expensive as the buildings themselves. It is important to take the right advice. Your local builder, groundwork contractor or Building Inspector will be the best person to advise you. Full groundworks specifications are available on request enquiries@chartstables.co.uk

63 PLANNING GRID Name Address Tel Fax Additional Information PLANNING & ADVICE PLANNING & PREPARATION 63

64 PLANNING GRID Name Address Additional Information Tel Fax

65 CONTACTS & DELIVERY UK & European Sales Office Chart House, Dencora Way, Ashford, Kent TN23 4FH Chart Stables +44 (0) Chart Garages +44 (0) PLANNING & ADVICE CONTACTS & DELIVERY Fencing Sales Office +44 (0) Delivery Charges Avon 200 Dorset 180 Isle of Wight POA Shropshire 210 Bedfordshire 135 Dyfed 350 Kent FREE Somerset 210 Berkshire 100 Essex 90 Lancashire 500 Staffordshire 210 Buckinghamshire 110 Glamorgan Mid/South 210 Leicestershire 180 Suffolk 160 Cambridgeshire 155 Glamorgan West 275 Lincolnshire 210 Surrey FREE Channel Islands POA Gloucestershire 180 Middlesex 90 Sussex East FREE Cheshire 275 Gwent 180 Norfolk 200 Sussex West 70 Clywd 320 Gwynedd 430 Northamptonshire 160 Warwickshire 180 Cornwall 440/ 740 Hampshire 110 Northumberland 550 Wiltshire 160 Cumbria 550 Herefordshire 210 Nottinghamshire 200 Worcestershire 180 Derbyshire 220 Hertfordshire 90 Oxfordshire 135 Yorkshire South 310 Devon 220 Humberside 390 Powys 275 Yorkshire North

66 STABLES GARAGES FENCING & SHEDS (0) (0) (0) Chart Stables & Garages, UK & European Sales Office Fencing Sales Office Chart House, Dencora Way, Ashford, Kent TN23 4FH

67 Chart Stables Specifications & Prices Manufacturer of quality equestrian buildings.

68 Contents Stables Specifications 4 Prices 6 Compare the Ranges 7 American Barns Specifications 9 Prices 9 Mobile Stables & Mobile Field Shelters Specifications 10 Prices Static Field Shelters Specifications 11 Prices 12 FAQ s enquiries@chartstables.co.uk Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.

69 Contacts & Delivery UK & European Sales Office Chart House, Dencora Way, Ashford, Kent TN23 4FH Chart Stables +44 (0) Chart Garages +44 (0) Fencing Sales Office +44 (0) Delivery Charges Avon 280 Bedfordshire 195 Berkshire 210 Buckinghamshire 185 Cambridgeshire 185 Channel Islands POA Cheshire POA Clywd POA Cornwall 540/ 840 Cumbria POA Derbyshire 340 Devon POA Dorset 275 Dyfed POA Essex 75/ 150 Glamorgan Mid/South POA Glamorgan West POA Gloucestershire 320 Gwent POA Gwynedd POA Hampshire 165 Herefordshire 300 Hertfordshire 160 Humberside POA Kent FREE Lancashire POA Leicestershire 260 Lincolnshire POA London 120 Middlesex 140 Norfolk POA Northamptonshire 245 Northumberland POA Nottinghamshire 300 Oxfordshire 190 Powys POA Shropshire 360 Somerset 330 Staffordshire 325 Suffolk 225 Surrey FREE Sussex East FREE Sussex West 150 Warwickshire 250 Wiltshire 270 Worcestershire 300 Yorkshire South 390 Yorkshire North POA All prices exclude VAT. Prices include installation More photographs are available on our website 3

70 Stable Specifications The Clipper Range Wall Construction Walls are built with 75mm x 50mm (3" x 2") pressure treated timber framing, spaced at 600mm (2') centres. Wall Cladding Selected high-quality Shiplap boarding 16mm x 150mm (5/8" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard available as an option. All boarding fixed with rust-resisting nails. Roof Construction Purlins are 100mm x 50mm (4" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. One clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes include coloured Onduline, felt, Onduvilla tiles or felt tiles. Doors Stable doors are 2085mm high, 1219mm wide, 50mm thick, (6' 10" high, 4' wide, 2" thick). Bottom doors are lined with 18mm (¾") heavy-duty OS kickboard. Top doors are ledged and braced. Anti-chew strips are fitted to the top of the lower doors extending 380mm (15") down the front. All door fittings heavy-duty and galvanised, to include 350mm (14") adjustable hook and band hinges to top stable doors and 450mm (18") to the bottom doors, 200mm (8") pad bolts, heavy-duty kickbolts and a cabin hook to the top and bottom stable doors. Tack Room doors are 762mm (30") wide, ledged and braced and fitted with a 200mm (8") pad bolt and a cabin hook. Windows A fully-opening 460mm x 660mm (18" x 26") Perspex window, lined on the inside with a safety mesh, is fitted to each Stable. Kickboards Stables are lined to 1219mm (4') high with 15mm OS Board. Tack Rooms and Hay Stores are not lined as standard but can be lined if required. Ventilation Louvred ventilation grille is fitted to gable ends of all Stables. Canopy Front canopy extends forward to 1219mm (4') and can be underlined as an optional extra. Guttering Half round, black guttering and downpipe is fitted to the front of all units. Rear guttering available. Height To eaves, measures 2235mm (7' 4") and to ridge 2968mm (9' 8"), including brickwork. Talk Grilles Can be fitted between Stables as an option. The Chart Range Wall Construction Walls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, spaced at 600mm (2') centres. Wall Cladding Quality Shiplap boarding 16mm x 150mm (5/8" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding fixed with rust-resisting nails. Roof Construction Purlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses boarded with 11mm OS Board, then covered with black Onduline roof sheeting. One clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes include coloured Onduline, Onduvilla tiles or felt tiles. Doors Stable doors are 2085mm x 1219mm x 70mm, (6' 10" x 4' x 2¾"). Bottom doors are lined with 18mm (¾") heavyduty, OS kickboard. Top doors ledged and braced. Anti-chew strips are fitted to the top door surround and to the top of the lower door extending down 380mm (15"). All door fittings are heavy-duty and galvanised, to include 450mm (18") adjustable hook and band hinges to top stable doors and 600mm (24") to the bottom stable doors, 200mm (8") pad bolts, heavy-duty kickbolts and a cabin hook to the top and bottom stable doors. Tack Room doors are 838mm (33") wide, Shiplap clad, framed, ledged and braced and fitted with a 200mm (8") pad bolt and cabin hook. Windows A 533mm x 915mm (21" x 36") two-bladed louvred window, with a fixed clear perspex lower section, fitted to front of each Stable. Galvanised bars fitted to the rear. Kickboards Stables are lined to 1219mm (4') high with 18mm (¾") OS Board. Tack Rooms and Hay Stores are not lined as standard, but can be lined if required. Ventilation Louvred ventilation grilles are fitted to gable ends of Stables only. Canopy Front canopy extends forward to 1219mm (4') and can be underlined as an optional extra. Guttering Half round, black guttering and downpipe fitted to the front of all units. Rear guttering is available. Height To eaves, measures 2362mm (7' 8") and to ridge 3095mm (10' 2"), including brickwork. Talk Grilles One 1162mm x 864mm (46" x 34") galvanised talk grille fitted between stables as standard. Barge Boards All in pressure treated, prepared timber, fixed with rust-resisting nails. Timber Treatment All timber is pressure treated (not including roof purlins) adding to the longevity of your buildings enquiries@chartstables.co.uk Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.

71 The Chester Range STableS Wall Construction Walls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, at 600mm (2') centres. Wall Cladding Selected high-quality Shiplap boarding 19mm x 125mm (¾" x 5"), pressure treated to ensure a long maintenance-free life. Weatherboard available as an option. All boarding fixed with rust-resisting nails. Roof Construction Purlins are 125mm x 50mm (5" x 2") spaced at 600mm (2') centres, held in place by joist holders on prefabricated trusses boarded with 11mm OS Board, finishing before the centre of the roof to allow for good airflow and ventilation, then covered with black Onduline roof sheeting. One clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. 38kg green mineral felt is available as a no cost option. Optional roof finishes includes coloured Onduline, Onduvilla tiles, felt tiles, clay tiles and slate. Doors Stable doors are 2235mm x 1219mm x 75mm (7' 4" x 4 x 3") in a pressure treated frame measuring 100mm x 75mm (4" x 3") with rounded edges. Top and bottom doors are faced with TGV cladding. Bottom doors are lined with 18mm (¾") heavy-duty plywood kickboard. Top doors are ledged and braced with vertical bracing to the leading edge, and can be fully lined. Anti-chew strips are fitted to the complete door frame, top door leading edge and top of the lower door, extending down 380mm (15"). All door fittings are heavyduty and galvanised, to include 600mm (24") adjustable hook and band hinges to top and bottom stable doors, 200mm (8") pad bolts, heavy-duty kickbolts and cabin hooks to all doors. Tack Room doors are 914mm (3') wide x 2235mm (3' x 7' 4") morticed, ledged and braced frame, rebated and infilled with TGV, lined with 12mm (½") plywood, fitted with a five levered morticed door lock and a cabin hook. Inward or outward opening Tack Room doors are available. Ventilation Louvred ventilation grilles are fitted to gable ends of Stables only. Canopy Front canopies extend forward to 1219mm (4') and are underlined in exterior-grade plywood. Canopies can be increased to 1800mm (6') and include 150mm x 150mm (6" x 6") support posts with curved bracing. Guttering Half-round, black guttering and downpipe are fitted to the front of all units. Height To eaves, measures 2464mm (8' 1") and to ridge 3438mm (11' 4"), including brickwork. Talk Grilles One 1727mm x 864mm (68" x 34") galvanised talk grille fitted between stables as standard. Timber Treatment All timber is pressure treated (not including roof purlins) adding to the longevity of your buildings. Windows A six-bladed louvre window measuring 533mm x 915mm (21" x 36") is fitted to each Stable and is fully adjustable from the outside. A heavy-duty grille is fitted to the rear. Kickboards Stables are lined to 1219mm (4') high with 18mm (¾") plywood kickboards (and can be lined to eaves height, as an option). Hay Stores are not lined as standard but can be lined as an option. More photographs are available on our website 5

72 Stable Prices 35 Pitch for tiled roof Clipper Chart Chester Chester Loose Boxes 3.6m x 3.6m (12' x 12') 1,750 2,395 2,945 3,845 Extra Unit 1,325 2,025 2,575 3, m x 3.6m (14' x 12') 2,095 2,895 3,450 4,225 Extra Unit 1,595 2,345 2,995 3,995 Foaling Box 4.8m x 3.6m (16' x 12') 2,145 3,095 3,625 4,550 Corner Units 4.8m x 3.6m (16' x 12') 1,875 2,525 2,895 5, m x 3.6m (18' x 12') 1,975 2,645 2,995 6,045 Tack Rooms 1.8m x 3.6m (6' x 12') 825 1,075 1,895 2, m x 3.6m (8' x 12') 975 1,255 2,195 2, m x 3.6m (12' x 12') 1,195 1,575 2,495 3,185 Integral Hay Stores 3.6m x 3.6m (12' x 12') 1,045 1,425 1,645 2, m x 3.6m (18' x 12') 1,675 2,245 2,575 3, m x 3.6m (24' x 12') 1,995 2,745 3,125 4, m x 3.6m (30' x 12') 2,645 3,495 3,995 5, m x 3.6m (36' x 12') 2,975 3,995 4,615 6,815 Covered Walkway 1.8m x 4.8m (6' x 16') 775 1,025 1,755 2,025 Archways 2.4m x 4.8m (8' x 16') 895 1,195 2,095 2, m x 4.8m (10' x 16') 1,045 1,345 2,225 2, m x 4.8m (12' x 16') 1,145 1,495 2,350 3, m x 4.8m (12' x 16') 2, m (12') to eaves, 4.3m (11') to ridge 3.6m x 4.8m (12' x 16') 3,545 POA 3.7m (12.2') to eaves, 4.6m (15') to ridge All prices exclude VAT. Prices include installation - Refer to page 3 for delivery charges enquiries@chartstables.co.uk Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.

73 Stables Compare The Ranges STableS Clipper Chart Chester Wall Construction 75mm x 50mm (3" x 2") 100mm x 50mm (4" x 2") 100mm x 50mm (4" x 2") Wall Cladding 16mm x 150mm ( 5 /8" x 6") 16mm x 150mm ( 5 /8" x 6") 19mm x 125mm (¾" x 5") eaves Height 2235mm (7' 4") 2362mm (7' 9") 2464mm (8' 1") Ridge Height 2968mm (9' 8") 3095mm (10' 2") 3488mm (11' 4") Roof Purlins 100mm x 50mm (4" x 2") 125mm 50mm (5" x 2") 125mm 50mm (5" x 2") Treatment Tanalith E Tanalith E Tanalith E Kickboard OSB 15mm ( 5 /8") OSB 18mm (¾") 18mm (¾") Ply Roof boarding Option 11mm ( 7 /16") OSB 11mm ( 7 /16") OSB 11mm ( 7 /16") Roof Covering Black Onduline Black Onduline Black Onduline Window Opening Two bladed louver / fixed lower pane Six bladed louver Window Protection Safety mesh Safety bars Safety bars Door Height 2085mm (6' x 10") 2085mm (6' 10") 2235mm (7' 4") Door Width 1219mm (4') 1219mm (4') 1219mm (4') Chewstrip to bottom Capping top of door and extending Capping top of door and extending Capping top of door and extending Stable Door down 381mm (15") to the front down 381mm (15") to the front down 381mm (15") to the front Chewstrip to Top Door Opening Surround Option Chewstrips to top door opening surround Chewstrips to complete door frame Chewstrip to Complete Door Opening Surround Option Option Chewstrips to complete frame Door Hinging 450mm (18") adjustable 600mm (24") adjustable 600mm (24") adjustable Canopy 1219mm (4') 1219mm (4') 1219mm (4') Talk Grilles Option 1162mm x 864mm (46" x 34") 1727mm x 864mm (68" x 34") Guttering 100mm (4") half round 100mm (4") half round 100mm (4") half round More photographs are available on our website 7

74

75 American Barn Specifications & Prices The Chart Range Wall Construction Walls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, spaced at 600mm (2') centres. Wall Cladding Selected high-quality Shiplap boarding 16mm x 150mm (5/8" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust-resisting nails. Roof Construction Purlins are 100mm x 50mm (4" x 2") spaced at 450mm (18") centres, which are held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. A clear roof sheet is also included above each stall. Optional roof finishes include coloured Onduline, felt or felt tiles. Internal Stalls Are timber framed using 100mm x 50mm (4" x 2") and are 18mm OS kickboard lined to 1219mm (4') and the upper section is constructed using 20mm galvanised steel bars spaced at 75mm (3") centres. Tack Rooms and Hay Stores If you require a Hay Store or Tack Room to be included we will incorporate these within the American Barn to suit your requirements. 3.0m x 3.6m Stalls (10' x 12' stalls) 10.36m (34') wide with 3.0m (10') passageway 3.6m x 3.6m Stalls (12' x 12' stalls) 10.36m (34') wide with 3.0m (10') passageway Chart Range 6.0m x 10.3m (20' x 34') 9, m x 10.3m (30' x 34') 13, m x 10.3m (40' x 34') 17, m x 10.3m (50' x 34') 21, m x 10.3m (60' x 34') 25,450 Extra 3.0m x 3.6m (10') 2 stalls 3, m x 10.3m (24' x 34') 9, m x 10.3m (36' x 34') 14, m x 10.3m (48' x 34') 18, m x 10.3m (60' x 34') 22, m x 10.3m (72' x 34') 26,995 Extra 3.6m x 3.6m (12') 2 stalls 4,295 Doors A side-hinged lower stable door 1320mm x 1219mm x 70mm (52" x 48" x 2 ¾") is fitted. Doors are faced with Shiplap and lined with 18mm (¾") OS kickboard. Anti-chew strips are fitted to the top door surround and to Chart Range Internal Partitions To supply for D.I.Y. only to go in your existing building. the top of the door extending 380mm (15") down the front. All door fittings are heavy-duty and galvanised, to include 600mm (24") adjustable hook and band hinges, 200mm (8") pad bolt, kickbolt and a cabin hook. A sliding door measuring 2438mm (8') wide is fitted to the front of the building. American Barn top doors can be fitted to the rear of each stall as an option. Windows A choice of windows is available as optional extras. Ventilation Two louvred ventilation grilles are fitted to each gable end. Kickboards External walls are lined with 18mm (¾") OS kickboard to 1219mm (4') high and can be fully lined to eaves, as an option. Guttering Half-round, black guttering and downpipes are fitted to both sides of the building. Height To eaves, measures 2235mm (7' 4") and to ridge 3970mm (13'), including brickwork. Barge Boards All in pressure treated, prepared timber, fixed with rust-resisting nails. Timber Treatment All timber is pressure treated (not including roof purlins) adding to the longevity of your buildings. 3.6m x 2.2m (12' x 7' 2") dividing panel with metal grille lined with 18mm (¾") OS Board to 1.2m (4') 3.6m x 2.2m (12' x 7' 2") dividing panel with metal grille lined with 18mm (¾") plywood to 1.2m (4') 3.6m x 2.2m (12' x 7' 2") dividing panel fully lined to 2.2m both sides with 18mm (¾") OS Board 3.6m x 2.2m (12' x 7' 2") dividing panel fully lined to 2.2m both sides with 18mm (¾") plywood 3.0m x 2.2m (9' 5 /6" x 7' 2") Shiplap front panel with metal grilles lined with 18mm (¾") OS Board to 1.2m (4') including lower door 3.0m x 2.2m (9' 5 /6" x 7' 2") Shiplap front panel with metal grilles lined with 18mm (¾") plywood to 1.2m (4') including lower door 3.6m x 2.2m (12' x 7' 2") Shiplap front panel with metal grilles lined with 18mm (¾") OS Board to 1.2m (4') including lower door 3.6m x 2.2m (12' x 7' 2") Shiplap front panel with metal grilles lined with 18mm (¾") plywood to 1.2m (4') including lower door All prices exclude VAT. Prices include installation - Refer to page 3 for delivery charges 9 american barns

76 Mobile Stable & Field Shelter Specifications The Clipper Range Wall Construction Walls are built with 75mm x 50mm (3" x 2") timber framing, spaced at 600mm (2') centres. Wall Cladding Quality Shiplap boarding 16mm x 150mm (5/8" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust-resisting nails. Roof Construction Purlins are 100mm x 50mm (4" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. Optional roof finishes include coloured Onduline, felt, Onduvilla tiles or felt tiles. Clear roof sheets are available on request. Openings Mobile Field Shelter openings are 2.1m (7') wide and are not fitted with anti-chew strips, or slip rails, as standard. Timber Mobile Skids Timber skids are constructed using pressure treated 150mm x 75mm (6" x 3") in conjunction with 50mm x 50mm x 4mm metal steels. Towing points are located at both ends and a heavy-duty chain is supplied. Windows (Mobile Stables only) A fully opening 460mm x 660mm (18" x 26") clear perspex window, lined on the inside with a safety mesh to each stable. Canopy Front canopy extends forward to 1219mm (4') and can be underlined as an optional extra. Guttering Half-round, black guttering and downpipe are fitted to the front of all units. Rear guttering is available on request. Height To eaves measures 2235mm (7' 4") and to ridge 2968mm (9' 8"), including skids. Barge Boards All in pressure treated, prepared timber, fixed with rust-resisting nails. Timber Treatment All timber is pressure treated (not including roof purlins) adding to the longevity of your buildings. Metal Mobile Skids Metal skids are constructed using 80mm x 40mm (3" x 1½") galvanised steel. Towing points are located at both ends and a heavy-duty chain is supplied. Kickboards Mobile Field Shelters and Mobile Stables are lined to 1219mm (4') high with 15mm OS Board. As an optional extra, it can be lined to eaves, if required. Doors (Mobile Stables only) Stable doors are 2085mm x 1219mm x 50mm thick, (6' 10" x 4' x 2"). Bottom doors are lined with 18mm (¾") heavy-duty OS kickboard. Top doors are ledged and braced. Anti-chew strips are fitted to the top of the lower door extending 380mm (15") down the front. All door fittings are heavy-duty and galvanised, to include 450mm (18") adjustable hook and band hinges fitted to the lower door and 350mm (14") fitted to the top door, 200mm (8") pad bolts, heavy-duty kickbolts and cabin hooks. Tack Room doors are ledged and braced and fitted with a 200mm (8") pad bolt and a cabin hook enquiries@chartstables.co.uk Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.

77 The Chart Range Wall Construction Walls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, spaced at 600mm (2') centres. Wall Cladding Selected high-quality Shiplap boarding 16mm x 150mm (5/8" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust-resisting nails. Roof Construction Purlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses. Mobile Stable roofs are boarded with 11mm OS Board finishing before the centre of the roof to allow for good airflow and ventilation, then covered with black Onduline roof sheeting. Mobile Field Shelter roofs are boarded. Optional roof finishes include coloured Onduline, Onduvilla tiles or felt tiles. A clear roof sheet is fitted to each Mobile Stable as standard. Opening Mobile Field Shelter openings are 2.1m (7') wide and are fitted with anti-chew strips, 100mm x 50mm (4" x 2") slip rail and brackets. Timber Mobile Skids Timber skids are constructed using pressure treated 150mm x 75mm (6" x 3"), in conjunction with 50mm x 50mm x 4mm metal steels. Towing points are located at both ends and a heavy-duty chain is supplied. Metal Mobile Skids Metal skids are constructed using 100mm x 100mm x 5mm (4" x 4") galvanised steel. Towing points are located at both ends and a heavy-duty chain is supplied. Kickboards Mobile Field Shelters and Mobile Stables are lined to 1219mm (4') high with 18mm (¾") OS Board and can be fully lined to eaves if required. Alternative types of kickboard are available. Canopy Front canopy extends forward to 1219mm (4'). Guttering Half-round, black guttering and downpipe are fitted to the front of all units. Rear guttering is available. Height To eaves measures 2632mm (7' 9") and to ridge 3095mm (10' 2"), including skids. Barge Boards All in pressure treated, prepared timber, fixed with rust-resisting nails. Timber Treatment All timber is pressure treated (not including roof purlins) adding to the longevity of your buildings. Static Field Shelters Our Static Field Shelters are built to the same specification as our Mobile Field Shelters, except the Static Field Shelters do not come with skids but are instead bolted down to a concrete pad with a single course of brickwork. MObIle STableS & MObIle FIelD SHelTeRS Doors (Mobile Stables only) Stable doors are 2085mm high, 1219mm wide, 70mm thick, (6' 10" high, 4' wide, 2¾" thick). Bottom doors are lined with 18mm (¾") heavy-duty, OS kickboard. Top doors are ledged and braced. Anti-chew strips are fitted to the top door surround and to the top of the lower door extending 380mm (15") down the front. All door fittings are heavy-duty and galvanised, to include 450mm (18") adjustable hook and band hinges to the top stable doors and 600mm (24") to the bottom stable doors, 200mm (8") pad bolts, heavy-duty kickbolts and cabin hooks are fitted to the top and bottom stable doors. Tack Room doors are ledged and braced and fitted with a 200mm (8") pad bolt and a cabin hook. Windows (Mobile Stables only) A 533mm x 915mm (21" x 36") two-bladed louvred window, with a fixed clear perspex lower section, is fitted to each Stable and is fully adjustable from the outside. Heavy-duty galvanised metal bars are fitted to the rear. Talk Grilles (Mobile Stables only) One 1162mm x 864mm (46" x 34") galvanised talk grille is fitted between stables, as standard. Mobile Field Shelter Static Field Shelter More photographs are available on our website 11

78 Mobile Stable Prices Mobile Stables Clipper Chart Timber Skids 3.6m x 3.6m (12' x 12') 2,195 2, m (4') Canopy 7.0m x 3.6m (23' x 12') 3,575 4,845 Metal Skids 3.6m x 3.6m (12' x 12') 2,395 3, m (4') Canopy 7.2m x 3.6m (24' x 12') 3,845 5, m x 3.6m (36' x 12') 5,325 7,475 Mobile Stable Combination Units All prices exclude VAT. Prices include installation - Refer to page 3 for delivery charges Clipper Chart Timber Skids 3.6m x 3.6m Stable (12' x 12') with a 1.8m x 3.6m (6' x 12') Tack Room 2,845 3, m (4') Canopy 3.6m x 3.6m Stable (12' x 12') with a 2.4m x 3.6m (8' x 12') Tack Room 3,045 3,945 Shiplap 3.6m x 3.6m Stable (12' x 12') with a 3.0m x 3.6m (10' x 12') Tack Room 3,075 4,115 Metal Skids 3.6m x 3.6m Stable (12' x 12') with a 1.8m x 3.6m (6' x 12') Tack Room 3,295 4, m (4') Canopy 3.6m x 3.6m with a 2.4m x 3.6m (12' x 12' + 8' x 12') Stable Tack Room 3,495 4,495 Shiplap 7.2m x 3.6m Double Stable (24' x 12') with a 1.8m x 3.6m (6' x 12') Tack Room 4,845 6, m x 3.6m Double Stable (24' x 12') with a 2.4m x 3.6m (8' x 12') Tack Room 5,045 6, m x 3.6m Stable (12' x 12') with a 3.6m x 3.6m (12' x 12') Hay Store 3,395 4, m x 3.6m Stable (12' x 12') with a 7.2m x 3.6m (24' x 12') Hay Store 4,725 6, m x 3.6m Double Stable (24' x 12') with a 3.6m x 3.6m (12' x 12') Hay Store 5,045 7,095 Static Field Shelter Prices Static Field Shelters Clipper Chart Apex Roof 3.6m x 3.6m (12' x 12') 1,645 1,895 No Canopy 5.4m x 3.6m (18' x 12') 1,975 2,495 Shiplap 7.2m x 3.6m (24' x 12') 2,575 2, m x 3.6m (30' x 12') 2,965 3, m x 3.6m (36' x 12') 3,515 3,995 Apex Roof 1.2m (4') Canopy Shiplap Clipper Chart 3.6m x 3.6m (12' x 12') 1,675 1, m x 3.6m (18' x 12') 2,145 2, m x 3.6m (24' x 12') 2,695 3, m x 3.6m (30' x 12') 3,245 4, m x 3.6m (36' x 12') 3,765 4, enquiries@chartstables.co.uk Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.

79 Mobile Field Shelter Prices Mobile Field Shelters Clipper Chart Timber Skids 3.6m x 3.6m (12' x 12') 1,875 2,145 Clipper Chart 1.2m (4') Canopy 5.4m x 3.6m (18' x 12') 2,295 2,995 Shiplap 7.0m x 3.6m (23' x 12') 2,975 3,495 Wall Construction 75mm x 50mm (3" x 2") 100mm x 50mm (4" x 2") Metal Skids 1.2m (4') Canopy 3.6m x 3.6m 5.4m x 3.6m (12' x 12') (18' x 12') 2,095 2,475 2,645 3,545 Roof lining Metal Skids Option 80mm x 40mm (3¼" x 1 7 /8") 11mm ( 7 /16") OSB 100mm x 100mm (4" x 4") Shiplap 7.2m x 3.6m (24' x 12') 3,245 4,175 Timber Skids 150mm x 75mm (6" x 3") 150mm x 75mm (6" x 3") 9.1m x 3.6m (30' x 12') 3,845 5,495 Kickboards 15mm ( 5 /8") OSB 18mm (¾") OSB 10.9m x 3.6m (36' x 12') 4,395 5,875 Roof Purlins 100mm x 50mm (4" x 2") 125mm x 50mm (5" x 2") Mobile Field Shelter Combination Units Clipper Chart Timber Skids 1.2m (4') Canopy Shiplap 3.6m x 3.6m (12' x 12') Field Shelter with a 1.8m x 3.6m (6' x 12') Tack Room 2,795 3, m x 3.6m (12' x 12') Field Shelter with a 2.4m x 3.6m (8' x 12') Tack Room 2,975 3,945 Metal Skids 1.2m (4') Canopy Shiplap 3.6m x 3.6m (12' x 12') Field Shelter with a 1.8m x 3.6m (6' x 12') Tack Room 2,975 3, m x 3.6m (12' x 12') Field Shelter with a 2.4m x 3.6m (8' x 12') Tack Room 3,195 4, m x 3.6m (24' x 12') Field Shelter with a 1.8m x 3.6m (6' x 12') Tack Room 4,445 5, m x 3.6m (24' x 12') Field Shelter with a 2.4m x 3.6m (8' x 12') Tack Room 4,595 5,825 Compare The Ranges Full detailed specifications can be found on pages 10 & 11 All prices exclude VAT. Prices include installation - Refer to page 3 for delivery charges More photographs are available on our website 13 MObIle STableS & MObIle FIelD SHelTeRS

80 FAQS Delivery Across the UK & Europe We deliver our diverse range of buildings across the UK and have established a network of distribution across Europe and to the Channel Islands. United Kingdom Delivery & Building Installation In virtually all instances we deliver and install our buildings. Occasionally a client will require a delivery only service and we can offer the services of a local haulier to deliver, for self-assembly. We can also recommend the services of established builders to carry out ground works in key areas around the country including Shropshire, Hereford and the North West of England, along with Cambridgeshire, Suffolk, Essex and the Midlands. Please contact our support team for further details. Delivery to the Channel Islands We regularly deliver equestrian buildings to the Channel Islands. For buildings that are above a certain size we will also consider delivering and installing, if required. Please call our support team to discuss this service. France & European Delivery & Installation We have established experience of delivering our buildings down through France and across Europe. We are ideally positioned here in Kent, within close proximity to Dover Docks and Calais, to supply our Agents and clients across mainland Europe, as far south as the Mediterranean. We work closely with two hauliers who travel from Kent across Europe weekly and can deliver your buildings for self assembly or our Agents can arrange to deliver and install your buildings making your purchase as stress free as possible. We can advise on planning applications and VAT exemption, if applicable. Our aim is always to ensure the purchase of your Chart Stable is as stress free as possible and that you will go on to enjoy many years of pleasure from our buildings. DIY Collection From our Workshops in Ashford, TN23 4FH Preparation & Planning We can support you with your planning application, providing you with elevated drawings to accompany your planning application. In addition, our experts can talk you through the design of your equestrian building and give general advice regarding groundworks that may need to be completed prior to assembly. Planning & Advice Service Our experts can help guide you through the planning process as well as providing elevated drawings for your planning application should you require permission. Contact us for more detailed information on planning requirements particular to your building. Do I Need Planning Permission? Whilst this will not be the answer you will want to hear, in 99% of cases the answer is yes. We would always suggest that a telephone call to your local Council is a good idea. They will give you some good, free advice and in most cases visit you. Listening to their suggestions in the first place may possibly save you time and money. Whilst we cannot give you the advice that a Planning Consultant can, we are able to offer you a helping hand, based on our experience over the years. How Long Will Planning Permission Take? Approximately 8 weeks. Can I Replace Old Buildings? Yes, but always make sure you are building like-for-like. Do not exceed the original ground floor area or height. We suggest that you take some photographs of the original buildings. How Do I Go About Getting Planning Permission? Firstly, you will need to ask your local Council for the necessary forms. These are not as daunting as you may think. The Council will need a scaled site plan, clearly marked with the position of your new buildings and six copies of elevated drawings. We can supply elevated drawings to you, if required. Finally, a cheque will need to be sent to the Council along with your application. Delivery Day On the delivery day it is imperative that our team can get easy and close access to the erecting site. They will work productively and courteously and leave the site tidy. Project Completion On completion, our senior erector will require you to ensure everything has been carried out to your satisfaction and will then require the final payment enquiries@chartstables.co.uk Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.

81 FaQS Timber Treatment Chart Stables, along with probably 98% of the Country s leading timber frame building manufacturers have been using a pressure treatment process for twenty years, to BS & EU Standards. What is Tanalised Timber? Tanalised timber has been impregnated with Tanalith E (used to pressure treat timber), a waterborne product based on copper triazole technology. Copper is derived from recycled sources and triazoles are organic biodegradable biocides, commonly used to protect many of the food crops we eat. This type of timber treatment is used extensively throughout the world and is used in the construction of timber buildings; eg within timber garages, play ground equipment, fencing, timber decking, the list is endless. Pressure treated timber ensures a long maintenance-free life against fungal decay (rot) and insect attack, and best of all, your building will require no further treatment during its life. DIY Timber Buildings We offer substantial discounts for DIY buildings collected from our Workshops in Ashford. Buildings are supplied complete. All the components are cut to size, and all the necessary screws, nails and bolts are included in order to make the assembly process as straight forward as possible. Detailed instructions are included and in the unlikely event you encounter a problem, we have trained staff available to offer advice, over the phone. The tools you will need include a hammer, hand saw, cordless screwdriver and a hammer drill. A question often asked is how long it will take to assemble. As a guide our installation teams, as an example will assemble a single 12' x 12' (3.6m x 3.6m) Stable in approximately an hour and a half. But please remember we are assembling buildings on a daily basis and it is highly unlikely that you would be able to match this time. Health and Safety is uppermost in our minds and we would urge you to take great care. The wall panels of our buildings are very heavy, so lifting them can be an issue. Particular care must be taken when on roofs and Scaffold Towers should be used. We would further recommend the use of Safety Boots and protective eye wear at all times. In the event you need advice we would suggest speaking to your local Health and Safety Executive, useful information can be found on their website What is the Difference Between Pressure Treating, Dipped & Sprayed Timber? Buildings that have been manufactured and then dipped or sprayed do not offer the same protection. This is a considerably cheaper option with untreated timber costing approximately 15% less than timber that has been pressure treated. This represents a very substantial saving to the manufacturer who doesn't use pressure treated timbers. Perhaps more frustratingly, if your building has not been pressure treated it will require repeated treatments, by yourself, during its life at additional cost and inconvenience to you. Why Choose Tanalised Timber? Do you want to spend time and money every year treating your building or do you want the maintenance-free option that opting for Chart s Tanalised timber offers? Our aim here at Chart Stables is to offer you a building with minimal maintenance during its life except keeping it cobweb free! More photographs are available on our website 15