Lambert Smith Hampton
|
|
- Victoria Hilary Ward
- 5 years ago
- Views:
Transcription
1 Lambert Smith Hampton Elite Engineering Ltd Quality modern CNC & Convention machine tools, engineers tools, inspection & general equipment (subject to availability) Elite Engineering Limited 1 Davis Way Fareham PO14 1JF United Kingdom Ended 13 Sep :49 BST Lot Description 1 XYZ 710 VMC CNC vertical machining centre, serial no. SMT00165 (2011), with approx. 80 x 450mm table, 710 x 450 x 500 mm travel, Siemens Sinumerik 828D control, 24 auto tool changer and swarf conveyor.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer pr...[more] 2 Hitachi Seiki Hitec-Turn 20SII CNC slant bed turning centre, serial no. HTS22227, max swing 380mm, Seiki Multi control, 10 rotary station turret (2 not operational) swarf conveyor. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that...[more] 3 Gildemeister NEF710 CNC centre lathe, serial no with approx. 3m bed, 710 mm max swing, Fanuc TC control, 3 jaw chuck and 2 x fixed steadies, we are advised chuck needs conversion to manual. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of th...[more] 4 Nakamura-Tome TMC3 CNC slant bed turning centre, serial no. not known, 560mm max swing, Fanuc System 6T control, 12 station rotary turret and 5 tool holders. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Health...[more] 5 Colchester Mascot 1600 SS & SC lathe, serial no. 7/0205/14488, with 3 jaw chuck. Please note the gap is not available. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Health & Safety Regulations, in parti...[more] 6 Colchester Triumph 2000 gap bed SS & SC lathe, serial no. LTR50G RJI/37222, with Digipac 5 control and 3 jaw chuck. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Health & Safety Regulations, in particul...[more] 8 Colchester Master 2500 gap bed SS & SC centre lathe, serial no. 5/0002/705366, with collet holder and rotary turret tailstock. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Health & Safety Regulations,...[more] 9 XYZ SM3000 turret mill, serial no , with Proto Trak SM control, 136 x 30cm table, powered longitudinal table feed.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 10 XYZ Pro 2000 turret mill, serial no. 7307, with Protrak MX2 control, approx. 125 x 26cm table and powered longitudinal table feed.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 11 Leadwell MCV-550S CNC vertical milling machining centre, serial no. not known, with approx. 560 x 440cm table, Fanuc System 3M control and 16 auto tool changer. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Hea...[more]
2 12 Archdale 48" elevating column radial arm drilling machine, serial number not known, with approx. 42 x 24" slotted box table. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Health & Safety Regulations, in par...[more] 13 Gate Giewont Model 2 horizontal milling machine, serial number 8509, with vertical head attachment, approx. 125 x 32cm table, power feeds in all directions and pendant control with arbor supports. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of th...[more] 14 P Hure universal milling machine with twin swivel vertical head and horizontal milling facility, serial no. not known, approx. 50 x 11.5" table, power feeds in all directions, arbor support and arbor. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety o...[more] 15 Elliott OO horizontal / vertical milling machine, serial no. not known, approx. 28 x 7.5" table. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Health & Safety Regulations, in particular PUWER regulations, p...[more] 16 Induma vertical milling machine, serial no. not known, approx. 28 x 7.5" table. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Health & Safety Regulations, in particular PUWER regulations, prior to being put...[more] 17 TOS Kurin FNK25A vertical turret milling machine, serial no. not known, with approx. 50 x 11.5" table and Mitutoyo control. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Health & Safety Regulations, in part...[more] 18 Ajax vertical turret milling machine, serial no. not known, with approx. 55 x 11" table and Wizard 350 control (not in use) (partially dismantled). Sold for scrap or spare parts only.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal...[more] 19 Jones & Shipman 540H horizontal spindle surface grinding machine, serial no. B090722, with approx. 26x6" table, approx. 12 x 6" magnetic chuck and extraction unit. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets curr...[more] 20 Jones & Shipman 540H horizontal spindle surface grinding machine, serial no. B090721, with approx. 26 x 6" table, approx. 12 x 6" magnetic chuck and extraction unit. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets cu...[more] 21 Jones & Shipman 540H horizontal spindle surface grinding machine, serial no. B075263, with approx. 26 x 6" table, approx. 12 x 6" magnetic chuck and extraction unit. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets cu...[more] 22 Jones & Shipman 540H horizontal spindle surface grinding machine, serial no. not known, with approx. 26 x 6" table, approx. 12 x 6" magnetic chuck and extraction unit. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets...[more] 23 Ribon RUR 800 universal cylindrical grinder, serial no. not known, with swing down internal grinding head, motorised work head with tailstock, tooling and coolant. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current...[more] 24 Ward Cutter Master tool and cutter grinder, serial no. not known, and extraction unit.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot.
3 25 Alfred Herbert 6 in line vertical drilling machine, serial no. not known, approx. 68 x 15" table. NB: This item has no CE marking. The purchaser is required to satisfy themselves as to the safety of the item and that it meets current Health & Safety Regulations, in particular PUWER regulations,...[more] 26 Pedestal drill.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 27 Pedestal drill.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 30 Edwards 37" straight manual folder.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 31 Hand screw fly press with handle and counter weights.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 32 Hand screw fly press with handle and counter weights.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 33 Hand screw fly press with handle and counter weights.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 34 Double ended pedestal polishing spindle.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 35 Wolf bench grinder 36 Qualters & Smith B7 Saw Master horizontal band saw, serial no. not known, with manual clamping, with roller in feed conveyor.nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 37 Circular saw (spares or repair).nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 38 Vertical band saw (spares or repair).nb. A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal work commencing on this lot. 39 Multico precision drill 40 Vanco vertical linisher 41 Spot welder 42 Clarke 10.3 bar air compressor, model SE25C200, serial number (2010) 43 Multico precision drill 44 Screw press
4 46 MPI M380II pick and place machine 47 Elite Flex4 pick and place machine (spares or scrap only) 48 Quantity of Elite machines for spares or scrap only comprising: Manix Manufacturing Stencil printer, Radial Super pick and place for surface mount components 49 Various inspection gauges and dial indicators 50 Five micrometers and a vernier caliper 51 24" x 36" granite surface plate on stand 53 24" x 24" Windley Bro's cast iron surface plate on stand 54 72" x 48" surface table 55 AcroVu profile projector / shadowgraph 56 Inspector VP1F illuminated magnifying glass 57 Six vernier height gauges with two dial indicators 58 24" x 18" inspection surface and a 18" across circular inspection table 59 24" x 24" inspection surface 60 24" x 24" inspection surface 61 Two angle plates and one t-slot box plate 62 Quantity of v blocks 63 Two 90 degree rules 64 Four hand analogue hand outside micrometers comprising: Fowler mm, Mitutoyo mm, Mitutoyo 5"-6", Mitutoyo mm 65 Four hand analogue hand outside micrometers comprising: Unbranded 100x125, Mitutoyo 3"-4", Mitutoyo mm, 4"-5" 66 Four hand analogue hand outside micrometers comprising: Unbranded 5"-6", Helios mm, Helios mm, Unbranded 4"-5" 67 Four hand analogue hand outside micrometers comprising: Helios mm, Fowler mm, Unbranded 3"-4", Unbranded 3"-4"
5 68 Five hand analogue hand outside micrometers comprising: Unbranded and without confirmed spec, Mitutoyo 0-25mm, Mitutoyo 0-1", Mitutoyo 4"-5", Moore and Wright without confirmed spec 69 Five hand analogue hand outside micrometers comprising: Starrett 3"-4", two unbranded and without confirmed spec, Combi Mike 2"-3", Mitutoyo 25-50mm 70 Moore and Wright mm analogue hand outside micrometer 71 Moore and Wright 6"-10" analogue hand outside micrometer 72 Four analogue hand analogue hand outside micrometers 73 Four analogue hand analogue hand outside micrometers 74 Three vernier calipers comprising: Mitutoyo 0-300mm, 0-200mm and an Etalon 0-230mm 75 A quantity of lettering and numbering punches 76 Bowers 20-25mm mechanical bore gauge 77 Fowler Bowers 1 3/8" - 2" mechanical bore gauge 78 Fowler Bowers 1"-1 3/8" mechanical bore gauge 79 Fowler Bowers mechanical bore gauge 80 Two mechanical bore gauges comprising: Mercer 3/4"-1" and Mercer 1"-1 1/2" 81 Two mechanical bore gauges comprising: Fowler Bowers 5/8"-3/4", Fowler Bowers 1/2"-5/8" 82 Bowers 37-51mm mechanical bore gauge 83 Mitutoyo Height Master gauge with carry case 84 Hommel Werke height gauge no CV Instrumatic Universal Hardness Tester with stand and carry case 86 CV Instrumatic Universal Hardness Tester with carry case 87 Moore and Wright 0-150mm digital vernier caliper 88 Two sine bars 89 Two Mitutoyo internal gauges
6 90 Draper gauge block set 91 Kuroda gauge block set 92 Coventry gauge block set 93 Coventry gauge block set 94 Four gauge block sets 95 Quantity of BT40 tool holders and collets 96 Quantity of BT40 tool holders and collets 97 Quantity of BT40 tool holders and collets 98 Quantity of pillar drill attachments 99 Quantity of BT40 boring and cutting tools 100 Quantity of tapered collets 101 Quantity of straight collets 102 Two BT40 indexable face milling heads 103 Quantity of straight collets and cutting tooling 104 Quantity of drill bits and reamers 105 Quantity of drill bits and reamers 106 Quantity of drill bits 107 Quantity of cutters 109 Quantity of drill bits and cutting heads 110 Quantity of drill bits and cutting heads 111 CNC machine vice with clamps 112 CNC machine vice with clamps
7 113 Three bore gauges comprising: Mitutoyo 0.7"-1.4", 0.3"-0.4" and 0.4"-0.7" 114 Two bore gauges comprising: Mitutoyo 1.4"-2.5" and a Baty without confirmed unspecification 115 Four depth gauges comprising: Moore and Wright 2"-8", 1/2"-8" and two unspecified 116 Two Mitutoyo bore gauges, a Mitutoyo depth gauge and a Moore and Wright depth gauge 117 Two Mitutoyo depth micrometers 118 Four Mitutoyo depthmicrometers 119 Nineteen various thread gauges 120 Eleven various thread gauges 121 Twelve various thread gauges 122 Thirteen various thread gauges 123 Seventeen various thread gauges 124 Seventeen various thread gauges 125 Thirty three various thread guages 126 Quantity of various internal thread gauges 127 Quantity of various internal thread gauges 128 Mitutoyo 800mm internal gauge and a Mitutoyo 300mm internal gauge 129 3kva hammer drill with transformer 130 Three vernier calipers comprising: Mitutoyo 24" and 18" and a PWM 26" 131 Mitutoyo internal gauge 132 Quantity of lathe tooling including: tail stock, collets, clamps, face plate, drill bits, hand tools and tooling steel 133 Four 3-jaw chucks 134 Three 4-jaw chucks
8 135 Quantity of lathe tooling including: clamps, steadies, a face plate and centres 136 Sixteen large collets 137 Quantity of tooling including, clamps, chucks and centres 138 Two lathe steadies 139 Two lathe face plates 140 One 4-jaw chuck and one 3-jaw chuck 141 Quantity of chuck jaws and clamps 142 Quantity of drill bits, centres, cutting heads and sundry tooling 143 Quantity of ball bearing rollers 144 Quantity of steel cutting heads and cutting tool holders 145 Quantity of drill heads, clamps, chucks, centres and sundry tooling 146 Quantity of chuck jaws 147 Quantity of drill bits, hand grinders, drill bits, spacers and sundry tooling 148 Quantity of press tooling 149 Quantity of drill bits springs, spacers and a lettering and numbering punches 150 Quantity of drill bits springs and spacers 151 Quantity of CNC tooling, BT40 tool holders, cutting tools and spacers 152 Seven various drilling and sundry tooling heads 153 Quantity of drill bits, BT40 tool holders, cutting heads and hand tools 154 D'Andrea t100 boring head 155 Hofmann dividing heads 156 Quantity of tooling including: drill bits, tool holders and collets
9 157 Magnetic chuck 158 Elliott Excel 12" rotary table 159 Rotary table 160 Two machine vices 161 Two machine vices 162 Two Record No 23 bench vices 163 Two Record No 23 bench vices 164 Three Record No 23 bench vices 165 Heavy duty drill bits 166 Two machine vices 167 Two machine vices 168 Quantity of drill bits 169 Quantity of drill bits and sundry tooling 170 Cutter cabinet and contents of cutters 171 Quantity of sundry warehouse equipment and hand tools 172 Three clamping kits 173 Quantity of various compressed air powered hand tools 174 Work bench and quantity of grinding heads 175 Three centres 176 Two Coventry Die grinding fixtures 177 Two oxy acetylene welding gauges and a trolley 178 Surface plate on stand
10 179 Quantity of sundry consumables including nuts, bolts and springs 180 Quantity of electrical wire 181 Mitutoyo digital counter, Eagle PA500 public address amplifier, Electron 1000 DV adhesive dispenser, Lectroetch Model 3200, two appliance testers (one us and one uk socket) 182 Two soldering irons and various soldering sundries 183 Two Digital Precision BPS TTi 1604 count digital multimeter and a Caltek Instrument CM Electronic hand tools including a Parkside glue gun, a Draper HP2000 torch and a Record engraver 186 Quantity of hand tools 187 AMP Bantam Rota-Crimp and a DuPont HT-102 crimping tools 188 RS Plug hand tool, a Vitelec Electronics DCC1113 a Berg Electronics HT234 and a AMP Certi-loc crimping tools 189 RS , a DMC adjustable and a RS crimping tool 190 Hand screw press 191 Various electronics tools comprising: itt Ox 725 metrix oscilloscope, a Clare portable appliance tester, a digital thermometer, a Megger insulation tester, a Meteor 600 5Hz to 600 MHz frequency tester and a Weir 413D power supply 192 Avery 2414 scales 193 Workbench with earth point and wire dispenser 194 PCS assembly jigs 195 Gibraltar key safe(key held at site office) 196 Key safe(key held at site office) 197 Three unused Sunlight towel dispensers 198 Quantity of various tooling 199 Rack and contents of stock. Please note: this lotmust be removed on Monday 18th September Pedestrian operated electronic stacker truck. This item has a certificate of Thorough Examination, next examination due 09/06/2018
11 201 Quantity of parts bins 202 Hewlett Packard DesignJet 600 printer 203 Works trolley 204 Barlow-Whitney electric glue pot, Type PD4/A no 4131/7 205 Bofa fume extraction unit 206 Screw press on bench 207 Quantity of nylon offcuts
Online Auction Of Machinery And Equipment From Hale Engineering Available Due To Closure.
Hale Engineering (Ends: 2018-02-07 14:00:00.0) Online Auction Of Machinery And Equipment From Hale Engineering Available Due To Closure. Lot 1 Nakamura Tome WT-250 CNC Turning Centre Nakamura Tome WT-250
More informationFor Sale by Online Auction. On behalf of the Proposed Liquidator of Nuneaton Precisions Limited and a Finance Company
For Sale by Online Auction On behalf of the Proposed Liquidator of Nuneaton Precisions Limited and a Finance Company CNC and Conventional Machine Tools Lots to include: CNC Machinery 204 Dahlih model MCV-020BA
More information1 Nakamura Tome TMC 4 CNC Lathe. Ref Nakamura Tome TMC 4 CNC Lathe; Fanuc 6T Control, 250mm 3 jaw Chuck; 12 Tool Turret; Tailstock
Machinery and Equipment - June 2018 (Ends: 2018-06-20 14:00:00.0) On Line Collective Auction of Machinery and Equipment Lot 1 Nakamura Tome TMC 4 CNC Lathe. Ref. 5605 Nakamura Tome TMC 4 CNC Lathe; Fanuc
More information1 Moore No2 Jig Grinder Moore No2 Jig Grinder, Anilam 2 axis DRO, 270mm Moore rotary table, 60,000 rpm, tooling and cabinet
Raicam Automotive Sale 1 Tool Room (Ends: 2017-03-22 14:00:00.0) Online Auction Of Tool Room Machinery And Associated Equipment. Lot 1 Moore No2 Jig Grinder Moore No2 Jig Grinder, Anilam 2 axis DRO, 270mm
More informationOnline Auction Of The Contents Of Jarvis Engineering Ltd Due To Closure.
Jarvis Engineering Ltd (Ends: 2016-06-08 14:00:00.0) Online Auction Of The Contents Of Jarvis Engineering Ltd Due To Closure. Buyers Premium 15% VAT 20% Location High Wycombe Lot 1 AYCE Horizontal Borer
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationOnline Auction Of The Contents Of Dean Engineering, Available Due To Closure.
Dean Engineering Ltd (Ends: 2018-06-27 14:00:00.0) Online Auction Of The Contents Of Dean Engineering, Available Due To Closure. Lot 1 Yang SMV1000 VMC Yang SMV1000 VMC, year 2000, Renishaw Probe, Vice,
More information26 carbide insert lathe turning tools and boring bars, 6 taper sleeve adapters and drill chuck 47 Manual hydraulic tool lift 48
Lot No. Description 2007 Microcut model BNC - 2680XXL Challenger CNC lathe, spindle 153mm, chuck 140mm, swing bed 650mm - gap 790mm, X 2000mm b.c., max work piece weight 1 2000kg, XY = 300 x 2150mm, Fagor
More information1 Pallet Jack. 2 Dock Plate. 3 Presto Lift. 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press. 6 Pedistal Grinder. Stockwell Equipment Co.
Phone: 1 Pallet Jack. 2 Dock Plate. 3 Presto Lift 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press 6 Pedistal Grinder Page: 2 7 Craftsman Pedistal Ginder 7a Lot of tools. 7b Mix lot tools, Clamps, measuring
More information(8th Nov 2018) MJS Engineering Services
(8th Nov 2018) MJS Engineering Services 1st Machinery Auctions are offering a complete plant clearance on behalf of MJS Engineering Services due to retirement. Online Auction Date: Thursday 8th November
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationKoster Industries, Inc.
Koster Industries, Inc. Rinaldi Precision Machine Co. Inc. - CNC Machine Shop Vertical machining centers, Leadwell, Fanus, CNC lathes, Johnford, Ikegai, Feeler speed lathe, Turret lathe, Vertical bandsaw,
More information1 Pallet Jack. 2 Dock Plate. 3 Presto Lift. 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press. 6 Pedistal Grinder. Stockwell Equipment Co.
Phone: 1 Pallet Jack. 2 Dock Plate. 3 Presto Lift 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press 6 Pedistal Grinder Page: 2 7 Craftsman Pedistal Ginder 8 Metal Table. 9 Metal table. 10 Rack and Steel
More informationMachinery & Engineering Equipment
Wheeler & Clinch, Sale 1, Tool Room Machinery & Engineering Equipment (Ends: 2018-07-18 14:00:00.0) Wheeler & Clinch, Plastic Injection Moulding Facility And Tool Room. Available Due To Closure. Lot 1
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationFACILITIES LIST 2014
95D MAINLINE DRIVE P.O. BOX 428 WESTFIELD, MA 01086 PHONE 413-562-0052 FAX 413-568-7902 info@preciseturning.com www.preciseturning.com FACILITIES LIST 2014 TURNING: MILLING: KIA SKT 21B CNC TURNING CENTER
More informationEquipment. Online Auction of Engineering Machinery and Equipment BUYERS PREMIUM 15% VAT 20% Location Oldbury, West Midlands. Lot no.
Engineering Machinery and Equipment (Ends: 2016-04-21 14:00:00.0) Online Auction of Engineering Machinery and Equipment BUYERS PREMIUM 15% VAT 20% Location Oldbury, West Midlands Lot 1 Daewoo Puma model
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationBIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationLodge Engineering Doncaster Ltd Catalogue
Lodge Engineering Doncaster Ltd Catalogue Lot 1 Title Hartford (2013) Model HCMC-1682 Vertical Machining Centre with Hartol-Fanuc AI100 Control with 4th Axis Interface 2 Feeler (2012) Model FBM-630L -
More informationTool Room Training Centre
Tool Room Training Centre SL NO. NAME OF THE MACHINE SUPPLIER SECTION QUANTITY 1 Lathe machine PRACTION (BANKA Conventional 2 40) 2 Lathe machine PRACTION (PIONEER) Conventional 2 3 Vertical knee & column
More informationLARGE CAPACITY PRECISION CNC MACHINING, TURNING, BORING & MACHINE SHOP FACILITY
PUBLIC WEBCAST AUCTION LARGE CAPACITY PRECISION CNC MACHINING, TURNING, BORING & MACHINE SHOP FACILITY AUCTION: THURSDAY, APRIL 28 AT 10:00 AM CDT INSPECTION: WEDNESDAY, APRIL 27 FROM 8:00 AM TO 4:00 PM
More informationOnly assist viewings available
Lots Catalogue Edition 1 3/11/2016 JBI Engineering Only assist viewings available Please request View time if required, as part of the site is still trading. 1 Cincinnati Arrow 750 (1997) Vertical Machining
More informationPUBLIC AUCTION ANTHOS ENGINEERING. Let Our Experience Be Your #1 Asset TM Tranmere Drive, Unit 4 Mississauga, Ontario L5S 1N4 DATE TIME LOCATION
PUBLIC AUCTION ANTHOS ENGINEERING 1999 programmable coolant hyd clamp & feed HAAS VF3 CNC vertical machining center 6 X 6 X 1/2 100 ton HYD-MECH H-12 horizontal band saw 2001 5000 hrs EDWARDS hydraulic
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationLots Catalogue Edition 1 2/6/15
Lots Catalogue Edition 1 2/6/15 QA Precision Engineering OPEN DAY: Wednesday 17th June 10am - 4pm QA Precision Engineering 3, Holton Health Trading Park, Holton Road, Poole, Dorset BG16 6LG 1 Hyundai Hit
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Qty. Description
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationSTATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
More informationPlant Closed EXCEL TOOL, INC. 162 Tabor Ave Falls Mills, Virginia Northwest of Bluefield, West Virginia
Complete CNC and Conventional Machine Shop Including CNC Flat Bed Lathes, CNC VMC, CNC Turning Center, Boring Mills, Conventional Toolroom Machinery, Tooling and Shop Equipment Plant Closed EXCEL TOOL,
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationBIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationCLT Auctions. Manual & Light CNC Machine Shop. Ends from Mar 06, am EST (3pm GMT) Description
CLT Auctions Manual & Light CNC Machine Shop Ends from Mar 06, 2019 10am EST (3pm GMT) 4400 Friendship Dr STE C Matthews North Carolina 28105 United States Lot Description 1 MITEE-BITE T slot kit 2 Vise
More informationTridecs. C O R P O R A T I O N Prototype & Production Machining. MANUFACTURING EQUIPMENT SCHEDULE Version 12.4
Tridecs C O R P O R A T I O N Prototype & Production Machining MANUFACTURING EQUIPMENT SCHEDULE Version 12.4 Frank Schenkhuizen, Jr. President & Chief Executive Officer Rick Alexander Operations Manager
More informationName: Machine Tool Technology ( )
Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationLATE MODEL MACHINE SHOP & TOOLROOM
LIVE ONSITE & WEBCAST AUCTION Plant Closure of: VENTURE PRECISION TECHNOLOGY AUCTION Thursday, December 3rd at 11:00am (CST) ASSET LOCATION 1881 Treble Drive Humble, TX 77338 INSPECTION Wednesday, December
More informationTUESDAY, APRIL 28, 2015 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF
TUESDAY, APRIL 28, 2015 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF Surplus to the Ongoing Needs of DEC INDUSTRIES INC. 2240-43rd AVENUE LACHINE, QC, H8T 2J8 TERMS & CONDITIONS FINAL PAYMENT
More informationFor Sale by Online Auction. On behalf of the Liquidator of EMR Brackley Limited and Various Finance Companies
For Sale by Online Auction On behalf of the Liquidator of EMR Brackley Limited and Various Finance Companies CNC Machining Centres, Conventional Machinery and Gear Cutting Machinery Lots to include: CNC
More informationCAPACITY LIST. Machine Shop
Machine Shop No Type Model Serial Number Description 1 Lathe Colchester CNC 2000L L2150SFBSA/01655 Between Centres 1250mm Swing:- Over Bed 390mm, Over Cross Slide 240mm, In Gap 580mm, - Spindle Bored to
More informationOnline auction of Machinery and Equipment available due to the closure of Autron Products. Buyers Premium 15% VAT 20% Location Halstead, Essex
Autron Products (Ends: 2016-07-13 14:00:00.0) Online auction of Machinery and Equipment available due to the closure of Autron Products. Buyers Premium 15% VAT 20% Location Halstead, Essex Lot 1 TOS LE400
More informationTU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691
More information1 Butler Elgamill Hi-Power Milling Machine Butler Elgamill Hi-Power Milling Machine, 1.5 x 5m bed, 3 Axis DRO
Amp Control UK Limited (Ends: 2016-07-20 14:00:00.0) Online auction of Machinery and Equipment available from Amp Control UK Limited, Available Due To Reinvestment Buyers Premium 15% VAT 20% Location Irvine,
More informationEPM Inc. Auction: Tuesday May 27, 10:30 AM (ET) Inspection: Monday May 26, 9 AM to 4 PM. CNC Boring & Machining Facility
EPM Inc. 5" Spindle Full 4th Updated Control & Drives CNC Boring & Machining Facility 210 Creditstone Road, Concord (Toronto), Ontario Canada 1of3 Full 4th Updated Controls 4.3" Spindle TOS CNC BORING
More informationLIVE AND WEBCAST AUCTION SALE BED MILLS, MACHINING CENTRES, EDM AND WIRE EROSION, GRINDING, TURNING & INSPECTION EQUIPMENT
AUCTION By Order of the Directors of FH Automotive Limited due to Rationalisation LIVE AND WEBCAST AUCTION SALE On: Thursday 30th October 2003 at 11.00am At: The Works, Unit 5 Bodmin Road, Wyken, Coventry
More informationTU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691
More informationLOT QTY DESCRIPTION NOTE (APPROX) x BLACK & GALV SHEET STEEL, 1 x BAY, UP TO 1800 x 1200mm, VARIOUS GAUGES, APPROX mm
1 PIGEON HOLE STORAGE RACK, 240 x 180cm, 58 x NESTS, WALL MOUNT 2 3 & SINGLE PHASE CIRCUIT BREAKERS, 2-100AMP 3 FABRICATED HAND PRESS, SUIT BENCH TOP MOUNT 4 QUANTITY NYLON INSULATION, 30-100mm DIAMETER
More informationBidding Closes: October 21-22, from 12PM EST. Complete Plant Closure - Over 2000 Lots! Location: 8625 Monticello Ln N., Maple Grove, MN 55369
2-day ONLine AUCTION Complete Plant Closure - Over 2000 Lots! Manufacturer of High-Quality Complex Precision Aerospace Components & Assemblies BERARDI ALTS130C 5-Axis Machining Center BOURN & KOCH / WILSON
More informationMACHINERY COMPANY OF BOSTON
WIGGLESWORTH PROVIDING THE FINEST IN USED & RECONDITIONED MACHINE TOOLS SINCE 1928 72 SPRINGFIELD CNC Universal Vertical Grinder 2012 CATALOG see page 4 for details INSPECT MACHINERY UNDER POWER IN OUR
More informationEquipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02. 3D Printer Specifications
Equipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02 Tech Specifications 3D Printer Specifications Print size (X Y Z) (Not less than) 600 x 300 x 300 mm Print Speed- Range 55-75 mm/sec Layer Resolution
More informationHIGH-PRECISION CNC MACHINING FACILITY AUCTION CONDUCTED BY:
PUBLIC AUCTION CAMPBELL S WELDING AND MACHINING LTD. Thursday, August 16, 2018 2:00 P.M. EDT MARK YOUR CALENDARS! 625 Little Pike Bay Rd. R.R. #1, Lion s Head, ON N0H 1W0 INSPECTION: Thursday, August 16
More informationAuction Catalog. Auction Date:
Auction Catalog CNC Turning and Screw Machinery Shop Closing, (Online), Location: Gilbert, AZ Auction Date: Tuesday, February 20, 2018 Bidding Starts: 10:00 AM (Arizona Time) KD Auctions 7918 E.McClain
More informationAL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More information+91-8048762195 Berlin Machine Corporation http://www.berlinmachines.com/ Manufacturer, Exporter, Wholesaler, and Trader of a wide range of precision engineered Industrial Machines and Accessories such
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationHigh Performance Heavy Duty Lathe
High Performance Heavy Duty Lathe TC-46M series is the most powerful and rigid CNC lathe in its class. Designed with the latest technology and excellent equipment for highest material removal rate and
More informationLambert Smith Hampton
Lambert Smith Hampton CNC 48 pallet FMS, CNC machining centres, machine tools, forklifts, cranes, engineer's tools, stock, etc CNC 48 pallet FMS, CNC machining centres, machine tools, forklifts, cranes,
More informationProduct Brochure For L682D. Description. Features. Auckland: (09)
AL-336D DELUXE - Centre Lathe 300 x 900mm Turning Capacity Includes Digital Readout, Quick Change Toolpost, Leadscrew Covers, Foot Brake & Cabinet Stand Ex GST Inc GST $5,200.00 $5,980.00 ORDER CODE: MODEL:
More informationMotor Power (kw / hp): Voltage / Amperage (V / amp): Shipping Dimensions (L x W x H) (cm): Nett Weight (kg): Features
AL-356V - Centre Lathe 356 x 1000mm Turning Capacity - 51mm Spindle Bore Includes Digital Readout, Quick Change Toolpost & Electronic Variable Speed With Digital Readout Ex GST Inc GST $7,150.00 $7,865.00
More informationAuction Catalog. Lots Start Closing:
Auction Catalog Surplus Assets of a Major Southern California Precision Manufacturer of Aerospace/ Medical Components Lots Start Closing: Tuesday, June 19, 2018 10:00 AM (PDT) Bidding: OPEN NOW KD Auctions
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationFACILITIES LIST. PH Fax Registered government contractor- CCR Registered Cage Code 3AV26
FACILITIES LIST PH 781-245-5966 Fax 781-245-5967 Email: info@fitzmachine.com Registered government contractor- CCR Registered Cage Code 3AV26 President: Kathleen Fitzgerald VP Operations: Edward Fitzgerald
More informationAL Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand
AL-336 - Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: MODEL: L682 AL-336 Swing Over Bed (mm): 300 Distance Between Centres (mm): 900 Spindle
More informationThe National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The National
More informationBuild a Drill Press Vise
Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe
More informationLaudiston Valuers & Auctioneer SALE: 752S DATE: 28 March 2012 at 10:00AM SM GENERAL ENGINEERING 5 CARIO STREET BULIMBA QLD
SM GENERAL ENGINEERING 5 CARIO STREET BULIMBA QLD _ 2 QUANTITY OF MEASURING INSIDE & OUTSIDE CALIPERS 3 VERNIER CALIPER - SME 4 DIAL CALIPER - NSK 5 VERNIER CALIPER 6 VERNIER CALIPER 7 OUTSIDE MICROMETER
More informationFNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way
RICH WELL 206.0 Dimensions R450 E FNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way 20 C D Chip conveyor 092 H G B 46 575 A F Unit:mm A B C D E F G H FNL220LSY/FNL220LY 952 2946 2700
More informationTU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox
TU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox Ex GST Inc GST $3,460.00 $3,979.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm):
More informationCHAMTEK MFG., INC. PROTOTYPE THROUGH PRODUCTION. Sheet metal Fabrication. CNC and General Machining. Assembly. Tooling CAD/CAM.
CHAMTEK MFG., INC. PROTOTYPE THROUGH PRODUCTION Sheet metal Fabrication CNC and General Machining Assembly Tooling CAD/CAM Stamping 123 Louise St. Rochester, NY 14606 TEL (585) 328-4900 FAX (585) 328-2938
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationAXIS ONLY 1578 HRS 5 AXIS CNC VERTICAL MACHINING CENTER
THE GOLDSTAR MACHINE TOOLS INC. Aerospace Precision CNC Machining Facility 159 Wilkinson Road, Brampton (Toronto), Ontario Canada 2011 5 AXIS 2010 ONLY 1,087 HRS HAAS VF-3, CNC VERTICAL MACHINING CENTER
More informationALL IS SOLD "AS-IS,WHERE-IS"-NO WARRANTIES EXPRESSED/IMPLIED
Page 1 This catalogue is meant merely as a guide. The auctioneer does not warrant the genuineness, accuracy or count of any items described herein. 1 LOT: Victor Welding & Cutting Set, with Accessories
More information2018 Facilities List
08 Facilities List 0 DOOSAN LYNX 00 0" CHUCK CNC TURNING CNC LATHE CENTER HIGH SPEED VERTICAL MILLING 00 MATSUURA RA IIG CENTER WITH PALLET CNC MILL CHANGER HIGH SPEED VERTICAL MILLING 999 DAEWOO DMV-400
More informationHM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
More informationHM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical:
More informationDUGARD EAGLE 200HT / 200MC
DUGARD EAGLE 00HT / 00MC Slant Bed, High Precision CNC Lathes EAGLE 00HT 5 Slant Bed Heavy duty cast construction allowing optimum chip clearance Rigid, High Precision Spindle Unit Model Eagle 00HT The
More informationAlpen Machine & Tool Ltd.
Due to Owner Retiring Alpen Machine & Tool Ltd. State of the Art CNC Precision Component Manufacturer 41A Buttermill Avenue, Concord, ON APPROX. $1.3M REPLACEMENT (6) PALLET CHANGER 2,480 HRS 1,173 HRS
More informationHIGH PRECISION CNC TURNING & MACHINING FACILITY
GUHRING GU-SS227 automatic drill MAZAK QT-35N-C CNC chucker Surplus to the Ongoing Needs of CAMERON VALVES & MEASUREMENTS 2005 MEGA BS-300A 13 automatic band saw 1999 TWIN PALLET MAZAK HTC-400 CNC Horizontal
More informationA1, CNC Turning Centre with Slant Bed, CNC 1 A2, CNC Turning Centre, CNC 2 A3, CNC Turning Centre, CNC 4, CNC 5 A4, CNC Turning Centre, CNC 9
A1, CNC Turning Centre with Slant Bed, CNC 1 A2, CNC Turning Centre, CNC 2 A3, CNC Turning Centre, CNC 4, CNC 5 A4, CNC Turning Centre, CNC 9 A5, CNC Turning Centre, CNC 8 A6, CNC Turning Centre, CNC 10
More informationTRIVIA TRADE 50 (PTY) LTD AUCTION DATE: MONDAY, 22 ND 10:30 VENUE: KIARA HOUSE, 27 3RD STREET, MONTAGUE GARDENS
TRIVIA TRADE 50 (PTY) LTD AUCTION DATE: MONDAY, 22 ND SEPTEMBER @ 10:30 VENUE: KIARA HOUSE, 27 3RD STREET, MONTAGUE GARDENS MOVABLES TERMS: R 5 000.00 Bank guaranteed cheque or EFT to register as well
More informationOur Facilities 5 AXIS MACHINING SOLUTIONS CNC TURNING
Our Facilities 5 AXIS MACHINING SOLUTIONS INTEGREX 300-IV 2010 5 AXIS MACHINE EQUIPED WITH 10 CHUCK AND 15 CHUCK. 60 BETWEEN CENTERS. 40 TOOL MAGAZINE. TURNING CAPACITY 16 DIAMETER. 15 H.P. MILL SPINDLE.
More informationMCV-300 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD.
MCV-3 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. MCV-3 CARTRIDGE SPINDLE Well balanced, rigid and easy maintenance, which is built in temperature controlled environment. Spindle, bearings,
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationPennsylvania College of Technology One College Ave. Williamsport, PA Student ID Number:
Pennsylvania College of Technology One College Ave. Williamsport, PA. 17701-5799 Name: School: Student ID Number: Date: COMPETENCY ASSESSMENT FOR MACHINIST GENERAL (MG) MACHINE TOOL TECHNOLOGY (MY) AUTOMATED
More informationOur clients success is our genuine concern
Our clients success is our genuine concern Overview M/S SEINEN is an associate company of Dawood Engineering. It was established in Year 2006, with an aim to provide customers with comprehensive engineering
More informationAL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand
AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,690.00 $5,159.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm): Swing
More informationUNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle
UNIT 4: Drilling machines: Classification, constructional features, drilling & related operations, types of drill & drill bit nomenclature, drill materials. Instructional Objectives At the end of this
More informationPUBLIC AUCTION WIT MANUFACTURING LTD. HIGH PRECISION CNC MACHINING FACILITY SHORT NOTICE SALE! 171 Webster Road Kitchener, Ontario, N2C 2E7
SHORT NOTICE SALE! PUBLIC AUCTION WIT MANUFACTURING LTD. 2006 LIVE MILLING MAKINO A51 CNC horizontal machining center MAZAK SUPER QUICK TURN 18MS CNC turning center 10,000 RPM LEBLOND MAKINO A55 DELTA
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationRoyal Corporation, Chennai
+91-8071676709 Royal Corporation, Chennai https://www.indiamart.com/royalcorporation/ We are the trader of measuring instruments, cutting tools, lifting tools and magnetic tools. All our products find
More informationPROTOOL MANUFACTURING
Surplus To The Ongoing Operations Of PROTOOL MANUFACTURING CNC Machine Shop 556 Bryne Drive, Barrie, Ontario, Canada 1of 2 Bridgeport CNC Mills 1of 2 CNC Lathes 1of 3 CNC Vertical Machining Centers HITACHI
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationTUESDAY, OCTOBER 27, 2015 *** 1:00 P.M. ***
TUESDAY, OCTOBER 27, 2015 *** 1:00 P.M. *** WELCOME TO THE AUCTION SALE OF JP JIG BORING INC. 133 REGINA ROAD VAUGHAN, ONTARIO, CANADA, L4L 8L9 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY AFTER
More informationONLINE PUBLIC AUCTION
ONLINE PUBLIC AUCTION By Order of the Owner DIMENSION MACHINE ENGINEERING LLC 24750 21-Mile Road Macomb, Michigan 48042 AUCTION BEGINS: Monday, July 28 th AUCTION ENDS: Thursday, July 31 st, at 10:00 A.M.
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More information