Ca t a l o g u e St a r p a d So l u t i o n s f o r t ra n s p o r t at i o n,

Transcription

1 Ca t a l o g u e St a r p a d 2012 So l u t i o n s f o r t ra n s p o r t at i o n, p r o t e c t i o n manipulation o f flat surfaces

2 2

3 The special cellular structure of cork offers optimum compression conditions for the protection and transportation of glass Cork forests form the basis of an ecological system unique in the world, contributing to the survival of more than 250 species of birds, reptiles and mammals. Cork is a material which is 100% recyclable, biodegradable and contains no contaminating products. Unlike other materials the extraction of the raw material does not result in the destruction of the tree. The average life of a cork oak is 200 years and each tree is capable of producing around kilos of cork during its life-cycle. The range of Starpad Separators is ideal for use on surfaces which require protection during processes of manipulation, storage and transportation. Cork has an exceptional capacity for compression and recuperation as well as being anti-slip. These attributes make it the perfect shock-absorber and buffer for pressures and movements to which materials are subjected during the process of manufacture. Starpad Separators contribute to the reduction of production costs by minimizing damage and breakage during the manipulation and transportation of materials. It can be used by makers of ceramics, furniture, automobiles etc., in that, its principal application is in the area of glass, whether laminated or double- glazed. New technology in the production of adhesives and adherents prevent marks or residues left on surfaces when the product is removed. Strict quality control of the raw material and the process of manufacture guarantee the correct function of the product. 3

4 STARPAD SEPARATORS OF ADHESIVE CORK Made from an agglomeration of natural cork, a light adhesive of low adherence is applied to the underlayer, which allows removal without leaving marks or residues of adhesive on the surface. They support a high level of burden per cm², with good impact absorption and avoid slippage of the load during transportation. They are available in different sizes and thicknesses according to the load and dimensions of the material to be protected. Presented in sheets and rolls. Constructive Characteristics: Materials: Density: Granulometry: Internal side adhesive: External side adhesive: Carrier: Liner: Agglomerated natural cork + removable adhesive kg/m3 1-2 mm Acrylic Removable Acrylic non-woven Siliconized paper Technical characteristics: Hardness: Tensile strength: 6-8 kg/cm2 Recovery: 75% Compression (F5): no cracks Temperature resistance: -20ºC +100ºC Durability: 12 months to 21ºC and 50% HR 4

5 Starpad separators of adhesive cork in sheets Format: in sheets of 315x195 mm. Standard sizes from 15 to 30 mm. Standard thickness from 1 to 4 mm. For other measurements, consult. Description Size Th i c k n e s s Un i t s/box Re fe re n ce x thousand Starpad adh. Cork (sheets) 15x15x1 mm 15x15 mm 1 mm x thousand Starpad adh. Cork (sheets) 15x15x2 mm 15x15 mm 2 mm x thousand Starpad adh. Cork (sheets) 15x15x3 mm 15x15 mm 3 mm x thousand Starpad adh. Cork (sheets) 15x15x4 mm 15x15 mm 4 mm x thousand Starpad adh. Cork (sheets) 18x18x1 mm 18x18 mm 1 mm x thousand Starpad adh. Cork (sheets) 18x18x2 mm 18x18 mm 2 mm x thousand Starpad adh. Cork (sheets) 18x18x3 mm 18x18 mm 3 mm x thousand Starpad adh. Cork (sheets) 18x18x4 mm 18x18 mm 4 mm x thousand Starpad adh. Cork (sheets) 20x20x2 mm 20x20 mm 2 mm x thousand Starpad adh. Cork (sheets) 20x20x3mm 20x20 mm 3 mm x thousand Starpad adh. Cork (sheets) 20x20x4 mm 20x20 mm 4 mm x thousand Starpad adh. Cork (sheets) 30x30x3 mm 30x30 mm 3 mm Starpad separators of adhesive cork in rolls Format: in rolls. Units in rolls vary according to the thickness of the material Standard sizes from 15 to 30 mm. Standard thickness from 1 to 5 mm. For other measurements, consult. Description Size Th i c k n e s s Un i t s/roll Un i t s/box Re fe re n ce x thousand Starpad adh. Cork (rolls) 15x15x1 mm 15x15 mm 1 mm x thousand Starpad adh. Cork (rolls) 15x15x2 mm 15x15 mm 2 mm x thousand Starpad adh. Cork (rolls) 15x15x3 mm 15x15 mm 3 mm x thousand Starpad adh. Cork (rolls) 15x15x4 mm 15x15 mm 4 mm x thousand Starpad adh. Cork (rolls) 18x18x1 mm 18x18 mm 1 mm x thousand Starpad adh. Cork (rolls) 18x18x2 mm 18x18 mm 2 mm x thousand Starpad adh. Cork (rolls) 18x18x3 mm 18x18 mm 3 mm x thousand Starpad adh. Cork (rolls) 18x18x4 mm 18x18 mm 4 mm x thousand Starpad adh. Cork (rolls) 20x20x2 mm 20x20 mm 2 mm x thousand Starpad adh. Cork (rolls) 20x20x3 mm 20x20 mm 3 mm x thousand Starpad adh. Cork (rolls) 20x20x4 mm 20x20 mm 4 mm x thousand Starpad adh. Cork (rolls) 20x20x5 mm 20x20 mm 5 mm x thousand Starpad adh. Cork (rolls) 24x24x5 mm 24x24 mm 5 mm x thousand Starpad adh. Cork (rolls) 30x30x3 mm 30x30 mm 3 mm x thousand Starpad adh. Cork (rolls) 30x30x4 mm 30x30 mm 4 mm x thousand Starpad adh. Cork (rolls) 30x30x5 mm 30x30 mm 5 mm

6 STARPAD SEPARATORS OF CORK + PVC Composed of natural cork agglomerate plus PVC foam. Not containing any kind of adhesive, the adherent quality of the foam allows their application to the surface by means of light pressure. Their removal is equally rapid and leaves no mark or print upon the material. They can support a high level of burden per cm², with good impact absorption and avoid slippage during transportation. They are available in different sizes and thicknesses appropriate to the load and dimensions of the material to be protected. Presented in sheets, rolls and 2 by 2. Constructive Characteristics: Materials: Density of cork: Granulometry: Density of foam: Liner (only in sheets and rolls): Agglomerated natural cork + pvc foam kg/m3 1-2 mm kg/m3 Transparent film of polyethylene of 400 microns Technical Characteristics: Hardness: Tensile strength cork: 6-8 kg/cm2 Tensile strength foam: 100 kpa (DIN 53571) Recovery: 75% Compression (F5): No cracks Elongation at break of foam: 120% (DIN 53571) 6

7 Starpads separators of cork+pvc in sheets Format: in sheets of 315x195 mm. Standard sizes from 15 to 20 mm. Standard thickness from 2 to 4 mm. For other measurements, consult. Description Size Th i c k n e s s Un i t s/b o x Re fe re n ce x thousand Starpad cork + pvc (sheets) 15x15x2+2 mm 15x15 mm 2 mm x thousand Starpad cork + pvc (sheets) 15x15x3+2 mm 15x15 mm 3 mm x thousand Starpad cork + pvc (sheets) 15x15x4+2 mm 15x15 mm 4 mm x thousand Starpad cork + pvc (sheets) 17x16,5x2+2 mm 17x16,5 mm 2 mm x thousand Starpad cork + pvc (sheets) 17x16,5x3+2 mm 17x16,5 mm 3 mm x thousand Starpad cork + pvc (sheets) 18x18x2+2 mm 18x18 mm 2 mm x thousand Starpad cork + pvc (sheets) 18x18x3+2 mm 18x18 mm 3 mm x thousand Starpad cork + pvc (sheets) 18x18x4+2 mm 18x18 mm 4 mm x thousand Starpad cork + pvc (sheets) 20x20x2+2 mm 20x20 mm 2 mm x thousand Starpad cork + pvc (sheets) 20x20x3+2 mm 20x20 mm 3 mm x thousand Starpad cork + pvc (sheets) 20x20x4+2 mm 20x20 mm 4 mm Starpad separators of cork+pvc in rolls Format : in rolls. Units in rolls vary according to the thickness of the material. Standard sizes from 15 to 30 mm. Standard thickness from 2 to 4 mm. For other measurements, consult. Description Size Th i c k n e s s Un i t s/r o l l Un i t s/b o x Re fe re n ce x thousand Starpad cork + pvc (rolls) 15x15x2+2 mm 15x15 mm 2 mm x thousand Starpad cork + pvc (rolls) 15x15x3+2 mm 15x15 mm 3 mm x thousand Starpad cork + pvc (rolls) 15x15x4+2 mm 15x15 mm 4 mm x thousand Starpad cork + pvc (rolls) 17x16,5x2+2 mm 17x16,5 mm 2 mm x thousand Starpad cork + pvc (rolls) 17x16,5x3+2 mm 17x16,5 mm 3 mm x thousand Starpad cork + pvc (rolls) 18x18x2+2 mm 18x18 mm 2 mm x thousand Starpad cork + pvc (rolls) 18x18x3+2 mm 18x18 mm 3 mm x thousand Starpad cork + pvc (rolls) 18x18x4+2 mm 18x18 mm 4 mm x thousand Starpad cork + pvc (rolls) 20x20x2+2 mm 20x20 mm 2 mm x thousand Starpad cork + pvc (rolls) 20x20x3+2 mm 20x20 mm 3 mm x thousand Starpad cork + pvc (rolls) 20x20x4+2 mm 20x20 mm 4 mm

8 Starpad separators cork+pvc (2 by2) Format: 2 by 2 (in bulk) Standard sizes from15 to 30 mm. Standard thickness from 2 to 4 mm. For other measurements, consult Description Size Th i c k n e s s Un i t s/box Re fe re n ce x thousand Starpad cork + pvc (2-2) 15x15x2+2 mm 15x15 mm 2 mm x thousand Starpad cork + pvc (2-2) 15x15x3+2 mm 15x15 mm 3 mm x thousand Starpad cork + pvc (2-2) 17x16,5x2+2 mm 17x16,5 mm 2 mm x thousand Starpad cork + pvc (2-2) 17x16,5x3+2 mm 17x16,5 mm 3 mm x thousand Starpad cork + pvc (2-2) 17x16,5x4+2 mm 17x16,5 mm 4 mm x thousand Starpad cork + pvc (2-2) 18x18x2+2 mm 18x18 mm 2 mm x thousand Starpad cork + pvc (2-2) 18x18x3+2 mm 18x18 mm 3 mm x thousand Starpad cork + pvc (2-2) 18x18x4+2 mm 18x18 mm 4 mm x thousand Starpad cork + pvc (2-2) 20x20x2+2 mm 20x20 mm 2 mm x thousand Starpad cork + pvc (2-2) 20x20x3+2 mm 20x20 mm 3 mm x thousand Starpad cork + pvc (2-2) 20x20x4+2 mm 20x20 mm 4 mm x thousand Starpad cork + pvc (2-2) 24x24x3+2 mm 24x24 mm 3 mm x thousand Starpad cork + pvc (2-2) 30x30x3+2 mm 30x30 mm 3 mm Starpad separators for curved glass Used primarily for the protection of curved surfaces or with projecting parts such as windscreen-wipers, structural glass, aluminium windows, ceramics etc. Composed of natural cork agglomerate plus PVC foam. They do not contain any kind of adhesive; the adherent quality of the foam allows their application upon the surface by means of light pressure. In the same way their removal is rapid and leaves no marks or prints on the surface. They support a high level of burden per cm², with good impact absorption and avoid slippage of the load during transportation. They are available in different sizes and thicknesses according to the burden and dimensions of the material to be protected. Constructive Characteristics: Materials: Agglomerated natural cork + pvc foam Density of cork: kg/m3 Granulometry: 1-2 mm Density of foam: kg/m3 Format: 2 by 2 Technical Characteristics: Hardness: Tensile strength of cork: 6-8 kg/cm2 Tensile strength of foam: 100 kpa (DIN 53571) Recovery: 75% Compression (F5): No Cracks Elongation at break of foam: 120% (DIN 53571) 8

9 Starpad separators for curved glass Description Si z e Th i c k n e s s Un i t s/b o x Re fe re n ce x thousand Starpad cork + pvc (2-2) 18x18x5+2 mm 18x18 mm 5 mm x thousand Starpad cork + pvc (2-2) 18x18x6+2 mm 18x18 mm 6 mm x thousand Starpad cork + pvc (2-2) 18x18x9+2 mm 18x18 mm 9 mm x thousand Starpad cork + pvc (2-2) 20x20x5+2 mm 20x20 mm 5 mm x thousand Starpad cork + pvc (2-2) 20x20x6+2 mm 20x20 mm 6 mm x thousand Starpad cork + pvc (2-2) 20x20x9+2 mm 20x20 mm 9 mm x thousand Starpad cork + pvc (2-2) 20x20x12+2 mm 20x20 mm 12 mm x thousand Starpad cork + pvc (2-2) 20x20x13+2 mm 20x20 mm 13 mm x thousand Starpad cork + pvc (2-2) 20x20x14+2 mm 20x20 mm 14 mm x thousand Starpad cork + pvc (2-2) 20x20x15+2 mm 20x20 mm 15 mm x thousand Starpad cork + pvc (2-2) 24x24x7+2 mm 24x24 mm 7 mm x thousand Starpad cork + pvc (2-2) 24x24x9+2 mm 24x24 mm 9 mm x thousand Starpad cork + pvc (2-2) 24x24x11+2 mm 24x24 mm 11 mm x thousand Starpad cork + pvc (2-2) 24x24x15+2 mm 24x24 mm 15 mm x thousand Starpad cork + pvc (2-2) 24x24x16+2 mm 24x24 mm 16 mm x thousand Starpad cork + pvc (2-2) 24x24x18+2 mm 24x24 mm 18 mm x thousand Starpad cork + pvc (2-2) 24x24x20+2 mm 24x24 mm 20 mm x thousand Starpad cork + pvc (2-2) 30x30x5+2 mm 30x30 mm 5 mm x thousand Starpad cork + pvc (2-2) 30x30x6+2 mm 30x30 mm 6 mm x thousand Starpad cork + pvc (2-2) 30x30x8+2 mm 30x30 mm 8 mm x thousand Starpad cork + pvc (2-2) 30x30x9+2 mm 30x30 mm 9 mm x thousand Starpad cork + pvc (2-2) 30x30x10+2 mm 30x30 mm 10 mm x thousand Starpad cork + pvc (2-2) 30x30x13+2 mm 30x30 mm 13 mm x thousand Starpad cork + pvc (2-2) 30x30x16+2 mm 30x30 mm 16 mm x thousand Starpad cork + pvc (2-2) 30x30x20+2 mm 30x30 mm 20 mm x thousand Starpad cork + pvc (2-2)40x40x6+2 mm 40x40 mm 6 mm x thousand Starpad cork + pvc (2-2)40x40x9+2 mm 40x40 mm 9 mm x thousand Starpad cork + pvc (2-2)40x40x13+2 mm 40x40 mm 13 mm

10 STARPAD SEPARATORS FOR AUTOMATIC PROCESSES Bobbins of adhesive cork specifically for automatic processes. The separators are designed in shape, size and presentation, specific to the necessities for protection and application of each client. Made to measure, they save on labour, facilitate storage of the finished product and guarantee the correct application of the separators. They support a high level of burden per cm², with good impact absorption and avoid slippage of the load during transportation. 10

11 e p a r a t o r s f o r Li s e c Bobbins of cork plus PVC specifically for Lisec processers. At the end of the production system, Lisec machines cut and stick the protector on the glass automatically. They contain no adhesive; the adherent attributes of the foam permit their application by means of light pressure. In the same way their removal is very rapid and leaves no mark or print on the material. They support a high level of burden per cm², with good impact absorption and avoid slippage of the load during transportation. Constructive Characteristics: Materials: Density of cork: Granulometry: Density of foam: Format: Agglomerated natural cork + pvc foam kg/m3 1-2 mm kg/m3 Bobbins of 18 mm x 300 mts Technical Characteristics: Hardness: Tensile strength of cork: 6-8 kg/cm2 Tensile strength of foam: 100 kpa (DIN 53571) Recovery: 75% Compression (F5): No craks Elongation at brake of foam: 120% (DIN 53571) Description Si z e Th i c k n e s s Un i t s/b o b b i n Re fe re n ce Lisec bobbins of cork + pvc 18x3+2 (300 mts.) 18 mm x 300 mts 3 mm LISEC 11

12 Starpad Separators for Lenhardt Bobbins of adhesive cork specifically for Lenhardt-Bystronic processors. At the end of the production process the Lenhardt machine adheres the protector on the glass automatically. They contain no adhesive; the adherent attributes of the foam permit their application upon the surface by means of light pressure. In the same way their removal is very rapid and leaves no mark or print on the material. They support a high level of burden per cm², with good impact absorption and avoid slippage of the load during transportation. Constructive Characteristics: Materials: Density of cork: Granulometry: Density of foam: Liner: Format: Agglomerated natural cork + pvc foam kg/m3 1-2 mm kg/m3 Transparent film of polyethylene of 400 microns Bobbins of 300 mts. or rolls of 41,5 mts. Technical Characteristics: Hardness: Tensile strength of cork: 6-8 kg/cm2 Tensile strenght of foam: 100 kpa (DIN 53571) Recovery: 75% Compression (F5): No Cracks Elongation at break of foam: 120% (DIN 53571) Description Si z e Th i c k n e s s Un i t s/b o b b i n Re fe re n ce Lenhardt - Bystronic bobbins of cork + pvc 18x3+2 (300 mts) 18 mm x 300 mts 3 mm LENH Lenhardt - Bystronic bobbins of cork + pvc 18x3+2 (41,5 mts) 18 mm x 41,5 mts 3 mm

13 e p a r a t o r s f o r a u t o m a t i c p r o c e s s e s Bobbins of adhesive cork specifically for automatic processes. The separators are designed in shape, size and presentation, specific to the necessities of protection and application for each client. Made to measure, they save in labour costs, facilitate storage of the finished product and guarantee the correct application of the separators. They support a high level of burden per cm², with good impact absorption and avoid slippage of the load during transportation. Constructive Characteristics: Materials: Density: Granulometry: Internal side adhesive: External side adhesive: Carrier: Liner: Format: Agglomerated natural cork + removable adhesive 240 kg/m3 1-2 mm Acrylic Removable Acrylic non-woven Siliconized Paper Rolls Technical Characteristics: Hardness: Tensile strength: > 550 kpa Recovery (100 psi): > 70% Compression (100 psi): % Temperature resistance: -20ºC +100ºC Durability: 12 months to 21ºC and 50% HR Description Si z e Th i c k n e s s Un i t s/b o b b i n Re fe re n ce Starpad bobbins of adhesive cork 28x28x12 mm (14 mts) 28x28 mm 12 mm For other measurements, formats o materials, consult. 13

14 STARPAD SEPARATORS FOR SPECIAL APPLICATIONS Starpad Separators specifically for various applications and production processes. Designed to cover the protective necessities in industry, they are manufactured with different materials according to the function and characteristics specific to the client. Our standard products include cork, nitrile cork or polyethylene foam, in various formats and thicknesses. 14

15 Starpad separators of adhesive PVC Manufactured in PVC, a light adhesive of low adherence is applied to the lower layer, which permits removal without leaving marks or adhesive residues on the surface. They support a high level of burden per cm², with good impact absorption and avoid slippage of the load during transportation. They are available in different sizes according to the load and dimensions of the material to be protected. Constructive Characteristics: Materials: Density: Adhesive: Liner: Format: Pvc foam 350 kg/m3 Removable Acrylic siliconized paper Rolls Description Si z e Th i c k n e s s Un i t s/r o l l Un i t s/b o x Re fe re n ce x thousand Starpad adhesive pvc (rolls) 15x15x4 mm 15x15 mm 4 mm x thousand Starpad adhesive pvc (rolls) 17,8x16,2x4 mm 1 7, 8 x 1 6, 2 mm 4 mm x thousand Starpad adhesive pvc (rolls) 18x18x4 mm 18x18 mm 4 mm

16 Starpad separators for manufacturers A product designed for application in the protection and transportation of small surfaces. Made from a mixture of cork and high density nitrile cork, in which is applied a low adherence adhesive to the lower layer, which allows its removal without leaving marks or residues on the surfaces. They support a high level of burden per cm², with good impact absorption and avoid slippage of the load during transportation. They are available in different sizes according to the load and dimensions of the material to be protected. Constructive Characteristics: Materials: Density: Granulometry: Internal side adhesive: External side adhesive: Carrier: Liner: Format: Agglomerated natural cork + nitrilic rubber Kg/m3 0,5 / 1 mm Acrylic Removable Acrylic non- woven siliconized paper Rolls Technical Characteristics: Hardness: Shore A Tensile strength: 2,35 Mpa Recovery: 80% Compression 400 psi: 20% - 30% Temperature Resistance: -20ºC +100ºC Durability: 12 months to 21ºC and 50% HR Descriptión Size Th i c k n e s s Un i t s/r o l l Units/box Re fe re n ce Starpad rolls for manufactures 10x10x0,5 mm 10x10 mm 0,5 mm Starpad rolls for manufactures 12x12x0,5 mm 12x12 mm 0,5 mm Starpad rolls for manufactures 15x15x0,5 mm 15x15 mm 0,5 mm

17 Starpad separators in individual boxes Starpad Separators in adhesive cork are also available in small boxes for special applications of small quantities. They are available in the usual three sizes and in the form of sheets of 315x195mm. Constructive Characteristics: Materials: Density: Granulometry: Internal side adhesive: External side adhesive: Carrier: Liner: Format: Agglomerated natural cork + removable adhesive kg/m3 1-2 mm Acrylic Removable Acrylic non- woven siliconized paper Sheets of 315x195 mm Technical Characteristics: Hardness: Tensile strength: 6-8 Kg/cm2 Recovery: 75% Compression (F5): No cracks Temperature Resistance: -20ºC +100ºC Durability: 12 meses a 21ºC y 50% HR Description Size Th i c k n e s s Un i t s/box Re fe re n ce Starpad adhesive cork box 15x15x3 mm 15x15 mm 3 mm Starpad adhesive cork box 18x18x3 mm 18x18 mm 3 mm Starpad adhesive cork box 20x20x3 mm 20x20 mm 3 mm

18 Starpad protective bobbins Bobbins of polyethylene foam with removable light adherent adhesive, pre-punched every 2.5cm to facilitate break-off at the desired length. It is a protector of various uses, ideal for elements with angles or shapes. They adapt perfectly to the surface to be protected and can be placed in layers, if greater thickness is required. In removal of the product no mark or residue is left. Constructive Characteristics: Materials: Polyethylene foam of closed cell Density: 25 kg/m3 Nº cells/inch: Internal side adhesive: Acrylic External side adhesive: Removable acrylic Carrier: non-woven Format: Rolls Cut: Pre-punched polyethylene rolls Technical Characteristics: Resistance to the traction (DIN53571): Max. longitudinal force 29,5 N Max. transverse force 22,6 N Longitudinal elongation 90,7% Transverse elongation 60,1% Fuerza de compresión (DIN53577) 50%: % 4º compression 322 N 50% 4º compression 920 N 70% 4º compression 2138 N Descriptión Si z e Th i c k n e s s Un i t s/b o x Re fe re n ce Bobina polietileno pretroquelada 50x10 mm x 12,5 mts 50 mm x 12,5 mts 10 mm 12 uds Bobina polietileno pretroquelada 75x10 mm x 12,5 mts 75 mm x 12,5 mts 10 mm 8 uds Bobina polietileno pretroquelada 100x10 mm x 12,5 mts 100 mm x12,5 mts 10 mm 6 uds

19 References of all products Re fe re n ce Descriptión Pa g e x thousand Starpad adh. Cork (sheets) 15x15x1 mm x thousand Starpad adh. Cork (sheets) 15x15x2 mm x thousand Starpad adh. Cork (sheets) 15x15x3 mm x thousand Starpad adh. Cork (sheets) 15x15x4 mm x thousand Starpad adh. Cork (sheets) 18x18x1 mm x thousand Starpad adh. Cork (sheets) 18x18x2 mm x thousand Starpad adh. Cork (sheets) 18x18x3 mm x thousand Starpad adh. Cork (sheets) 18x18x4 mm x thousand Starpad adh. Cork (sheets) 20x20x2 mm x thousand Starpad adh. Cork (sheets) 20x20x3mm x thousand Starpad adh. Cork (sheets) 20x20x4 mm x thousand Starpad adh. Cork (sheets) 30x30x3 mm x thousand Starpad adh. Cork (rolls) 15x15x1 mm x thousand Starpad adh. Cork (rolls) 15x15x2 mm x thousand Starpad adh. Cork (rolls) 15x15x3 mm x thousand Starpad adh. Cork (rolls) 15x15x4 mm x thousand Starpad adh. Cork (rolls) 18x18x1 mm x thousand Starpad adh. Cork (rolls) 18x18x2 mm x thousand Starpad adh. Cork (rolls) 18x18x3 mm x thousand Starpad adh. Cork (rolls) 18x18x4 mm x thousand Starpad adh. Cork (rolls) 20x20x2 mm x thousand Starpad adh. Cork (rolls) 20x20x3 mm x thousand Starpad adh. Cork (rolls) 20x20x4 mm x thousand Starpad adh. Cork (rolls) 20x20x5 mm x thousand Starpad adh. Cork (rolls) 24x24x5 mm x thousand Starpad adh. Cork (rolls) 30x30x3 mm x thousand Starpad adh. Cork (rolls) 30x30x4 mm x thousand Starpad adh. Cork (rolls) 30x30x5 mm x thousand Starpad cork + pvc (sheets) 15x15x2+2 mm x thousand Starpad cork + pvc (sheets) 15x15x3+2 mm x thousand Starpad cork + pvc (sheets) 15x15x4+2 mm x thousand Starpad cork + pvc (sheets) 17x16,5x2+2 mm x thousand Starpad cork + pvc (sheets) 17x16,5x3+2 mm x thousand Starpad cork + pvc (sheets) 18x18x2+2 mm x thousand Starpad cork + pvc (sheets) 18x18x3+2 mm x thousand Starpad cork + pvc (sheets) 18x18x4+2 mm x thousand Starpad cork + pvc (sheets) 20x20x2+2 mm x thousand Starpad cork + pvc (sheets) 20x20x3+2 mm x thousand Starpad cork + pvc (sheets) 20x20x4+2 mm x thousand Starpad cork + pvc (rolls) 15x15x2+2 mm x thousand Starpad cork + pvc (rolls) 15x15x3+2 mm x thousand Starpad cork + pvc (rolls) 15x15x4+2 mm x thousand Starpad cork + pvc (rolls) 17x16,5x2+2 mm x thousand Starpad cork + pvc (rolls) 17x16,5x3+2 mm x thousand Starpad cork + pvc (rolls) 18x18x2+2 mm x thousand Starpad cork + pvc (rolls) 18x18x3+2 mm 7 19

20 Re fe re n ce Description Pa g e x thousand Starpad cork + pvc (rolls) 18x18x4+2 mm x thousand Starpad cork + pvc (rolls) 20x20x2+2 mm x thousand Starpad cork + pvc (rolls) 20x20x3+2 mm x thousand Starpad cork + pvc (rolls) 20x20x4+2 mm x thousand Starpad cork + pvc (2-2) 15x15x2+2 mm x thousand Starpad cork + pvc (2-2) 15x15x3+2 mm x thousand Starpad cork + pvc (2-2) 17x16,5x2+2 mm x thousand Starpad cork + pvc (2-2) 17x16,5x3+2 mm x thousand Starpad cork + pvc (2-2) 17x16,5x4+2 mm x thousand Starpad cork + pvc (2-2) 18x18x2+2 mm x thousand Starpad cork + pvc (2-2) 18x18x3+2 mm x thousand Starpad cork + pvc (2-2) 18x18x4+2 mm x thousand Starpad cork + pvc (2-2) 20x20x2+2 mm x thousand Starpad cork + pvc (2-2) 20x20x3+2 mm x thousand Starpad cork + pvc (2-2) 20x20x4+2 mm x thousand Starpad cork + pvc (2-2) 24x24x3+2 mm x thousand Starpad cork + pvc (2-2) 30x30x3+2 mm x thousand Starpad cork + pvc (2-2) 18x18x5+2 mm x thousand Starpad cork + pvc (2-2) 18x18x6+2 mm x thousand Starpad cork + pvc (2-2) 18x18x9+2 mm x thousand Starpad cork + pvc (2-2) 20x20x5+2 mm x thousand Starpad cork + pvc (2-2) 20x20x6+2 mm x thousand Starpad cork + pvc (2-2) 20x20x9+2 mm x thousand Starpad cork + pvc (2-2) 20x20x12+2 mm x thousand Starpad cork + pvc (2-2) 20x20x13+2 mm x thousand Starpad cork + pvc (2-2) 20x20x14+2 mm x thousand Starpad cork + pvc (2-2) 20x20x15+2 mm x thousand Starpad cork + pvc (2-2) 24x24x7+2 mm x thousand Starpad cork + pvc (2-2) 24x24x9+2 mm x thousand Starpad cork + pvc (2-2) 24x24x11+2 mm x thousand Starpad cork + pvc (2-2) 24x24x15+2 mm x thousand Starpad cork + pvc (2-2) 24x24x16+2 mm x thousand Starpad cork + pvc (2-2) 24x24x18+2 mm x thousand Starpad cork + pvc (2-2) 24x24x20+2 mm x thousand Starpad cork + pvc (2-2) 30x30x5+2 mm x thousand Starpad cork + pvc (2-2) 30x30x6+2 mm x thousand Starpad cork + pvc (2-2) 30x30x8+2 mm x thousand Starpad cork + pvc (2-2) 30x30x9+2 mm x thousand Starpad cork + pvc (2-2) 30x30x10+2 mm x thousand Starpad cork + pvc (2-2) 30x30x13+2 mm x thousand Starpad cork + pvc (2-2) 30x30x16+2 mm x thousand Starpad cork + pvc (2-2) 30x30x20+2 mm x thousand Starpad cork + pvc (2-2)40x40x6+2 mm x thousand Starpad cork + pvc (2-2)40x40x9+2 mm x thousand Starpad cork + pvc (2-2)40x40x13+2 mm LISEC Lisec bobbins of cork + pvc 18x3+2 (300 mts.) LENH Lenhardt - Bystronic bobbins of cork + pvc 18x3+2 (300 mts) Lenhardt - Bystronic bobbins of cork + pvc 18x3+2 (41,5 mts) 12 20

21 Starpad bobbins of adhesive cork 28x28x12 mm (14 mts) x thousand Starpad adhesive pvc (rolls) 15x15x4 mm x thousand Starpad adhesive pvc (rolls) 17,8x16,2x4 mm x thousand Starpad adhesive pvc (rolls) 18x18x4 mm Starpad rolls for manufactures 10x10x0,5 mm Starpad rolls for manufactures 12x12x0,5 mm Starpad rolls for manufactures 15x15x0,5 mm Starpad adhesive cork box 15x15x3 mm Starpad adhesive cork box 18x18x3 mm Starpad adhesive cork box 20x20x3 mm Bobina polietileno pretroquelada 50x10 mm x 12,5 mts Bobina polietileno pretroquelada 75x10 mm x 12,5 mts Bobina polietileno pretroquelada 100x10 mm x 12,5 mts 18 21

22 As s i s t a n c e BARNACORK, S.L. C/Santiago Russinyol, 14 Nave D-2 Pol. Ind Can Humet de Dalt Polinyà(Barcelona) Tel: Fax: Mail: Web: